PCM1717E/2K - 18-Bit Stereo Audio DAC | Texas Instruments
MPN: PCM1717E/2K ✓ ActivePCM1717E/2K Overview
A digital-to-analog converter, or DAC, converts sampled digital audio into corresponding analog voltage signals. Within the signal chain, the PCM1717E/2K belongs to the ADC/DAC and audio-interface hierarchy, where it bridges a digital audio source and an analog audio output stage. Its delta-sigma architecture is suited to audio applications in which a compact converter with integrated digital input and stereo analog outputs is preferable to a discrete codec implementation.
The key specifications are 18-bit resolution, operation up to 48 kHz, two-channel conversion, and a 20-pin SSOP package. The verified manufacturer and distributor listings identify the device as an audio DAC with I2S input, while additional detailed electrical characteristics require confirmation from the manufacturer datasheet. The 20-pin surface-mount format supports compact PCB layouts, although analog and digital return paths still require careful routing.
PCM1717E/2K is suitable for CD-player and digital-audio subsystems, consumer audio equipment, multimedia computers, set-top boxes, and other embedded audio products that use I2S-compatible digital audio sources. Its stereo output architecture simplifies system partitioning by placing conversion directly between the digital source and an analog amplifier or line input.
When laying out the PCB, keep the digital input traces away from the analog output traces, use a continuous ground reference plane, and place the power and signal-conditioning components close to their associated pins. Confirm the required analog output network, bypass capacitors, power sequencing, and supported logic levels against the manufacturer datasheet before releasing a production layout.
This product page combines the verified manufacturer and distributor listing information with package, application, replacement, and design guidance for engineers evaluating PCM1717E/2K. It also identifies the limitations of the available technical information so that footprint, pin, and electrical validation can be completed against the official datasheet.
Drop-in alternatives for PCM1717E/2K — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PCM1717E/2K (same form factor and footprint) — differing in Package, Product Type.
PCM1717E
✅ Drop-InContact for price
View Datasheet →PCM1717EG
✅ Drop-InContact for price
View Datasheet →PCM1717EG4
✅ Drop-In📋 Reference alternative (not in catalog)
PCM1717E/2KG4
✅ Drop-In📋 Reference alternative (not in catalog)
PCM1716E/2K
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →PCM1717E/2K Maximum Ratings & Electrical Characteristics
| Product Type | Stereo audio digital-to-analog converter (DAC) |
| Manufacturer | Texas Instruments |
| Resolution | 18 bit |
| Maximum Sampling Rate | 48 kHz |
| Number of Channels | 2 channels |
| Digital Audio Interface | I2S |
| Architecture | Delta-sigma |
| Package | 20-pin SSOP |
| Package Type | Gull-wing surface-mount package |
| Terminal Count | 20 terminals |
| Mounting Type | Surface mount |
| Output Type | Stereo analog audio output |
| Sampling Rate | 48 kHz maximum |
PCM1717E/2K gull-wing surface-mount package Pin Configuration Guide
Pin configuration for PCM1717E/2K (gull-wing surface-mount package package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for PCM1717E/2K.
Refer to the datasheet for full pin configuration.
Typical Applications
PCM1717E/2K is suitable for 6 applications: CD Player and Digital Audio Source, Multimedia Computer Audio Output, Consumer Audio Equipment, Set-Top Box Digital Audio, Digital Instrument Audio Module, Portable Audio Interface.
CD Player and Digital Audio Source
PCM1717E/2K fits a CD-player subsystem that delivers a two-channel I2S stream at up to 48 kHz. Its 18-bit stereo DAC provides the dedicated conversion stage between the digital audio decoder and an analog line output. The 20-pin SSOP package keeps the converter compact, while the I2S interface avoids requiring a separate digital-audio transmission standard. Designers should match the source clocking to the PCM1717E requirements and select the analog output network for the intended line-level impedance.
Recommended
Multimedia Computer Audio Output
The PCM1717E/2K can serve as the two-channel audio output stage in a multimedia computer or embedded media appliance. An I2S-capable audio controller supplies digital samples at up to 48 kHz, and the Texas Instruments converter produces left and right analog outputs for an amplifier or headphone circuit. Its dedicated DAC function simplifies partitioning compared with using a full mixed-signal codec. Layout should isolate the I2S clock and data lines from the analog outputs to preserve signal quality.
Recommended
Consumer Audio Equipment
PCM1717E/2K is appropriate for compact consumer-audio products that accept digital audio but require analog stereo outputs. The combination of 18-bit resolution, 48 kHz maximum sampling rate, and I2S input supports conventional CD-rate conversion without making the design dependent on a complex codec. Its 20-pin SSOP format supports surface-mount assembly, but the board must provide stable decoupling and controlled analog return paths. Use the manufacturer application information to establish output loading and filtering.
Recommended
Set-Top Box Digital Audio
A set-top box can use PCM1717E/2K to convert a two-channel I2S audio stream into analog stereo signals. The 18-bit DAC and 48 kHz sampling capability align with standard digital-audio program material, while the SSOP package leaves board area for communications and decoding circuitry. The implementation should account for the required audio clock, deglitch or filtering requirements, and analog output impedance. Placement near the output connector can reduce analog trace length but must not create digital return coupling.
Recommended
Digital Instrument Audio Module
PCM1717E/2K can provide a dedicated stereo analog output for an embedded digital instrument or audio measurement module. Its I2S interface allows a digital processor to stream two channels at up to 48 kHz, while the 18-bit converter produces balanced or unbalanced signals according to the downstream circuit. The converter should be grounded carefully and bypassed locally. For instrumentation-grade accuracy, evaluate noise, distortion, and output bandwidth against the complete signal chain.
Recommended
Portable Audio Interface
The PCM1717E/2K can be used in a portable or embedded audio interface where two-channel I2S conversion is required in a small surface-mount footprint. At 48 kHz maximum sampling rate, it supports common digital-audio rates, while its dedicated DAC architecture keeps the signal path understandable. Battery-powered designs must verify supply voltage and current against the datasheet before implementation. Low-power shutdown behavior, output loading, and startup timing should be confirmed from the official electrical characteristics.
Recommended
Recommended Products Summary
Engineering reference data for PCM1717E/2K — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PCM1717E | PCM1717EG | PCM1717EG4 | PCM1717E/2KG4 | PCM1716E/2K |
|---|---|---|---|---|---|---|
| Package | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Key Differentiators
- Exact ordering-code support (vs PCM1717E)
- Direct 48 kHz stereo I2S conversion (vs PCM1716E/2K)
- Compact 20-pin SSOP implementation (vs PCM1717EG4)
Design Notes
Separate the I2S data and clock routing from the analog output paths. Keep the digital source and converter supply-return current away from the stereo output region, use a continuous ground reference, and route analog outputs as short and symmetrically as practical. The 20-pin SSOP footprint should be checked against the exact package drawing, especially pin pitch, lead span, and solder mask limits.
Place the required bypass capacitors close to the PCM1717E/2K supply and ground pins, and follow the manufacturer layout example for capacitor type and placement. Confirm the allowable supply range, sequencing, and digital input limits before connecting system rails. Where multiple supplies exist, bring them up in the sequence specified by the manufacturer datasheet rather than assuming all rails can be enabled simultaneously.
Treat the system clock as a sensitive signal even at 48 kHz sample rate because the converter can require a multiplied internal operating clock. Use short clock routing, a continuous return path, and termination only when required by the source and datasheet timing guidance. Avoid introducing test pads, long jumpers, or branches in the clock and I2S nets near the converter.
Do not substitute PCM1717 family order codes solely because their descriptions look similar. Check the ordering table for temperature grade, terminal finish, green-part status, and reel configuration. For any replacement, also compare clock requirements, analog output level, output impedance, and all pin names. A PCB footprint match alone does not guarantee functional or qualification equivalence.
Compliance Information
The verified product listings identify the PCM1717E family and lead-free-related ordering variants, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declarations are included in the supplied product records. AEC-Q100 is not applicable to this conventional consumer-audio DAC.