Texas Instruments

PCM1717E/2K - 18-Bit Stereo Audio DAC | Texas Instruments

MPN: PCM1717E/2K ✓ सक्रिय
20-pin SSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

PCM1717E/2K अवलोकन

Texas Instruments PCM1717E/2K is a stereo delta-sigma digital-to-analog converter for audio systems, featuring 18-bit resolution, 48 kHz operation, and I2S audio input in a 20-pin SSOP package. The device is designed for compact consumer and multimedia equipment requiring two-channel digital audio conversion with a straightforward serial interface. It accepts digital audio data through the I2S interface and provides analog stereo outputs for external amplification or line-level routing.

A digital-to-analog converter, or DAC, converts sampled digital audio into corresponding analog voltage signals. Within the signal chain, the PCM1717E/2K belongs to the ADC/DAC and audio-interface hierarchy, where it bridges a digital audio source and an analog audio output stage. Its delta-sigma architecture is suited to audio applications in which a compact converter with integrated digital input and stereo analog outputs is preferable to a discrete codec implementation.

The key specifications are 18-bit resolution, operation up to 48 kHz, two-channel conversion, and a 20-pin SSOP package. The verified manufacturer and distributor listings identify the device as an audio DAC with I2S input, while additional detailed electrical characteristics require confirmation from the manufacturer datasheet. The 20-pin surface-mount format supports compact PCB layouts, although analog and digital return paths still require careful routing.

PCM1717E/2K is suitable for CD-player and digital-audio subsystems, consumer audio equipment, multimedia computers, set-top boxes, and other embedded audio products that use I2S-compatible digital audio sources. Its stereo output architecture simplifies system partitioning by placing conversion directly between the digital source and an analog amplifier or line input.

When laying out the PCB, keep the digital input traces away from the analog output traces, use a continuous ground reference plane, and place the power and signal-conditioning components close to their associated pins. Confirm the required analog output network, bypass capacitors, power sequencing, and supported logic levels against the manufacturer datasheet before releasing a production layout.

This product page combines the verified manufacturer and distributor listing information with package, application, replacement, and design guidance for engineers evaluating PCM1717E/2K. It also identifies the limitations of the available technical information so that footprint, pin, and electrical validation can be completed against the official datasheet.

के लिए ड्रॉप-इन विकल्प PCM1717E/2K — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PCM1717E/2K (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type.

Texas Instruments
Package: 20-SSOP, 5.30 mm width
Product Type: Stereo audio digital-to-analog converter

PCM1717E

✅ ड्रॉप-इन
Texas Instruments
📦 20-pin SSOP
Stereo audio digital-to-analog converter · 18 bit · 48 kHz · 2 channels · I2S · Delta-sigma DAC · 8X · 18-bit input data

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PCM1717EG

✅ ड्रॉप-इन
Texas Instruments
📦 20-pin SSOP
Stereo audio digital-to-analog converter · 18 bit · 48 kHz · Serial I2S · 2 channels (stereo) · 8x · -40 °C to +85 °C · 20-SSOP

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PCM1717EG4

✅ ड्रॉप-इन
📦 20-pin SSOP
Same 18-bit stereo, 48 kHz I2S DAC family and 20-pin SSOP footprint; suffix-specific grade and terminal-finish details require confirmation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PCM1717E/2KG4

✅ ड्रॉप-इन
📦 20-pin SSOP
PCM1717E/2K ordering family with green-compatible suffix; core 18-bit stereo DAC and 20-pin SSOP interface remain comparable

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PCM1716E/2K

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Texas Instruments
📦 20-pin SSOP
Stereo audio digital-to-analog converter · 24 bit · 96 kHz · 2 channels (stereo) · CMOS delta-sigma · I2S · 28-SSOP · 5.30 mm (0.209 inch)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PCM1717E/2K Maximum Ratings और Electrical Characteristics

Product Type Stereo audio digital-to-analog converter (DAC)
Manufacturer Texas Instruments
रेज़ोल्यूशन 18 bit
Maximum Sampling Rate 48 kHz
Number of Channels 2 channels
Digital Audio Interface I2S
Architecture Delta-sigma
पैकेज 20-pin SSOP
Package Type Gull-wing surface-mount package
Terminal Count 20 terminals
माउंटिंग प्रकार Surface mount
आउटपुट प्रकार Stereo analog audio output
सैंपलिंग रेट 48 kHz maximum

PCM1717E/2K gull-wing surface-mount package पिन कॉन्फ़िगरेशन गाइड

PCM1717E/2K (gull-wing surface-mount package पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

PCM1717E/2K के लिए gull-wing surface-mount package पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PCM1717E/2K.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

PCM1717E/2K के लिए उपयुक्त है 6 अनुप्रयोगs: CD Player and Digital Audio Source, Multimedia Computer Audio Output, Consumer Audio Equipment, Set-Top Box Digital Audio, Digital Instrument Audio Module, Portable Audio Interface.

🎧

CD Player and Digital Audio Source

PCM1717E/2K fits a CD-player subsystem that delivers a two-channel I2S stream at up to 48 kHz. Its 18-bit stereo DAC provides the dedicated conversion stage between the digital audio decoder and an analog line output. The 20-pin SSOP package keeps the converter compact, while the I2S interface avoids requiring a separate digital-audio transmission standard. Designers should match the source clocking to the PCM1717E requirements and select the analog output network for the intended line-level impedance.

🖥️

Multimedia Computer Audio Output

The PCM1717E/2K can serve as the two-channel audio output stage in a multimedia computer or embedded media appliance. An I2S-capable audio controller supplies digital samples at up to 48 kHz, and the Texas Instruments converter produces left and right analog outputs for an amplifier or headphone circuit. Its dedicated DAC function simplifies partitioning compared with using a full mixed-signal codec. Layout should isolate the I2S clock and data lines from the analog outputs to preserve signal quality.

🔧

Consumer Audio Equipment

PCM1717E/2K is appropriate for compact consumer-audio products that accept digital audio but require analog stereo outputs. The combination of 18-bit resolution, 48 kHz maximum sampling rate, and I2S input supports conventional CD-rate conversion without making the design dependent on a complex codec. Its 20-pin SSOP format supports surface-mount assembly, but the board must provide stable decoupling and controlled analog return paths. Use the manufacturer application information to establish output loading and filtering.

📺

Set-Top Box Digital Audio

A set-top box can use PCM1717E/2K to convert a two-channel I2S audio stream into analog stereo signals. The 18-bit DAC and 48 kHz sampling capability align with standard digital-audio program material, while the SSOP package leaves board area for communications and decoding circuitry. The implementation should account for the required audio clock, deglitch or filtering requirements, and analog output impedance. Placement near the output connector can reduce analog trace length but must not create digital return coupling.

🎛️

Digital Instrument Audio Module

PCM1717E/2K can provide a dedicated stereo analog output for an embedded digital instrument or audio measurement module. Its I2S interface allows a digital processor to stream two channels at up to 48 kHz, while the 18-bit converter produces balanced or unbalanced signals according to the downstream circuit. The converter should be grounded carefully and bypassed locally. For instrumentation-grade accuracy, evaluate noise, distortion, and output bandwidth against the complete signal chain.

📱

Portable Audio Interface

The PCM1717E/2K can be used in a portable or embedded audio interface where two-channel I2S conversion is required in a small surface-mount footprint. At 48 kHz maximum sampling rate, it supports common digital-audio rates, while its dedicated DAC architecture keeps the signal path understandable. Battery-powered designs must verify supply voltage and current against the datasheet before implementation. Low-power shutdown behavior, output loading, and startup timing should be confirmed from the official electrical characteristics.

अनुशंसित उत्पादों का सारांश

PCM1717E Texas Instruments उपयोग में: CD Player and Digital Audio Source, Consumer Audio Equipment, Digital Instrument Audio Module, Portable Audio Interface PCM1717EG Texas Instruments उपयोग में: CD Player and Digital Audio Source, Consumer Audio Equipment, Digital Instrument Audio Module PCM1717EG4 Same-family stereo DAC ordering variant उपयोग में: Multimedia Computer Audio Output, Set-Top Box Digital Audio, Portable Audio Interface PCM1717E/2KG4 Same PCM1717E/2K ordering family उपयोग में: Multimedia Computer Audio Output, Set-Top Box Digital Audio
What is the PCM1717E/2K?
The PCM1717E/2K is a Texas Instruments stereo audio digital-to-analog converter with 18-bit resolution, operation up to 48 kHz, and an I2S digital audio interface in a 20-pin SSOP package. According to the manufacturer product and distributor listings, it converts two-channel digital audio into analog stereo outputs for consumer, multimedia, and embedded audio systems. It is intended for designs that require a dedicated stereo DAC rather than a full audio codec.
Where can I download the PCM1717E/2K datasheet?
The official Texas Instruments datasheet is available through the manufacturer documentation link for PCM1717E, while the product page is reached by searching PCM1717E/2K at Texas Instruments. The verified distributor record also links the PCM1717E/2K directly to its technical documentation. Use the pin-description table, electrical characteristics, application circuit, and package drawing in the manufacturer datasheet when creating a PCB footprint.
Where can I find the PCM1717E/2K pinout?
The PCM1717E/2K pinout is identified in the manufacturer datasheet for the PCM1717E family and its 20-pin SSOP package. The verified listings describe the device as a 20-pin SSOP stereo DAC, while the datasheet provides the authoritative pin names and numbering. Use the package drawing and pin-description table together because the exposed functions, power pins, grounds, clock connections, and analog outputs must match the exact lead numbering.
What are the key specifications of PCM1717E/2K that engineers should know?
The PCM1717E/2K is a two-channel, 18-bit stereo DAC that supports sampling rates up to 48 kHz and accepts I2S digital audio. Its 20-pin SSOP surface-mount package is the central mechanical constraint for PCB design. Texas Instruments describes the device as a SoundPlus stereo DAC. Supply voltage, output level, dynamic range, distortion, operating temperature, and exact clock requirements should be taken from the manufacturer datasheet.
Is PCM1717E/2K suitable for a CD-player audio output?
Yes, PCM1717E/2K is suitable for a CD-player or similar digital-audio subsystem that provides an I2S-compatible stream at up to 48 kHz. Its 18-bit stereo DAC architecture directly matches the two-channel audio use case. The design still needs correct I2S clocking, a suitable analog output network, stable supplies, and an output amplifier or line receiver selected for the intended impedance and signal level.
What is the difference between PCM1717E and PCM1717E/2K?
PCM1717E/2K is the orderable designation associated with the PCM1717E stereo DAC in the verified listings. The distinction is a manufacturer ordering-code suffix, so the package, electrical behavior, and pin assignment must be checked against the ordering information rather than inferred from the slash suffix. Both records identify an 18-bit, two-channel, 48 kHz I2S DAC in a 20-pin SSOP package.
What can replace PCM1717E/2K on the same PCB?
PCM1717E, PCM1717EG, PCM1717EG4, and PCM1717E/2KG4 are the closest same-manufacturer candidates identified for replacement review because they belong to the PCM1717 family and use the 20-pin SSOP format. Verify enable, supply, clock, and analog-pin assignments against the datasheet before substitution. The available cross-reference results do not establish a fully verified cross-brand drop-in replacement.
Is PCM1717E/2K the same as PCM1717EG?
PCM1717E/2K and PCM1717EG are closely related Texas Instruments orderable versions of the PCM1717E stereo DAC family, but they should not be treated as automatically identical without checking the ordering table. Both verified comparison records identify a 20-pin SSOP, two-channel, 18-bit delta-sigma DAC, yet suffix options can indicate temperature grade, lead finish, or packaging status. Confirm those details before production substitution.
When should I choose PCM1717E/2K over PCM1717E?
Choose PCM1717E/2K when that exact manufacturer ordering code is required by the BOM, approved drawing, or qualification record. Choose PCM1717E only after confirming that its ordering attributes, temperature grade, terminal finish, and shipping form match the application. Both identify the same fundamental 18-bit, 48 kHz, stereo I2S DAC function in a 20-pin SSOP package, so functional compatibility alone is not enough for an approved substitution.
PCM1717E/2K vs PCM1717EG - which is better for an audio application?
PCM1717E/2K and PCM1717EG both provide the core 18-bit, two-channel, 48 kHz I2S DAC function in a 20-pin SSOP package. Neither is universally better without examining the manufacturer ordering codes and operating-temperature requirements. PCM1717EG is preferable when that specific variant is approved by the design; PCM1717E/2K is preferable when the released BOM requires that exact code. Verify pin and grade compatibility before either choice.
What is the best cross-brand equivalent for PCM1717E/2K?
No cross-brand drop-in equivalent for PCM1717E/2K can be confirmed from the available manufacturer and distributor records. A candidate must match the 20-pin SSOP footprint, I2S interface, 18-bit stereo conversion, 48 kHz capability, clock requirements, supply voltage, and analog-output pinout. Use the Texas Instruments cross-reference search or the XAIPART Request a Quote form when sourcing an alternative, and do not assume that any similarly described DAC is pin-compatible.
How should PCM1717E/2K be placed on a PCB?
Place the PCM1717E/2K so that the short I2S traces run directly from the digital audio source, while keeping those traces away from the analog outputs and external output components. Use a continuous ground plane, provide local bypass capacitance at the supply pins, and route analog outputs as short as practical. The 20-pin SSOP footprint and pin numbering must follow the manufacturer package drawing exactly.
What power and thermal considerations apply to PCM1717E/2K?
Power and thermal design should begin with the supply voltage, quiescent current, and output-power conditions listed in the PCM1717E manufacturer datasheet. The SSOP package exposes limited heat-dissipation area, so the converter should not be placed next to a linear regulator or power amplifier unless the PCB layout deliberately manages heat. Confirm maximum supply voltage and operating temperature before connecting the device to system rails.
What is the lifecycle status of PCM1717E/2K?
PCM1717E/2K is treated as an active catalog product because current manufacturer and distributor listings continue to identify the exact ordering code. Texas Instruments lists PCM1717E/2K for audio D/A conversion, and multiple distributor records show current product pages. Production designers should nevertheless confirm ordering status, lead time, and lifecycle notices when placing a long-running design into service.
Where to buy PCM1717E/2K online?
Use the Request a Quote form on this page to request PCM1717E/2K availability, current lead time, and ordering details. The part is a Texas Instruments 20-pin SSOP stereo DAC with 18-bit resolution, 48 kHz operation, and I2S input. Current stock and lead time should be confirmed at quotation time because they can change with demand, packaging, and manufacturing conditions.
What is the price of PCM1717E/2K?
Use the Request a Quote form on this page for the current PCM1717E/2K unit price and quantity-break schedule. The price can vary with order quantity, selected packaging, and market conditions, while the exact ordering code PCM1717E/2K must be preserved in the request. This page does not present a static price because quote-based sourcing provides fresher transaction information.
Is PCM1717E/2K in stock and what is its lead time?
PCM1717E/2K is listed by current distributors, but inventory and lead time should be confirmed through the Request a Quote form on this page. The ordering code is a Texas Instruments 20-pin SSOP, 18-bit stereo DAC rated for operation up to 48 kHz with an I2S interface. Quote requests should state the required quantity, reel or tube preference, and target delivery date.

के लिए इंजीनियरिंग संदर्भ डेटा PCM1717E/2K — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose PCM1717E/2K when the design requires a Texas Instruments 18-bit, two-channel DAC with I2S input, operation up to 48 kHz, and a 20-pin SSOP footprint. PCM1717E, PCM1717EG, PCM1717EG4, and PCM1717E/2KG4 are practical same-manufacturer candidates for PCB reuse, but the ordering table must confirm temperature grade, terminal finish, green-part status, and reel configuration. PCM1716E/2K is a related family candidate that requires closer review of clocking and analog-pin compatibility. No cross-brand drop-in alternative is confirmed. For a released production design, prefer PCM1717E/2K when it is the approved BOM item and use a same-family alternative only after a complete pin, electrical, and lifecycle review.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद PCM1717E PCM1717EG PCM1717EG4 PCM1717E/2KG4 PCM1716E/2K
Package 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

मुख्य विशेषताएँ

  • Exact ordering-code support (बनामPCM1717E)
  • Direct 48 kHz stereo I2S conversion (बनामPCM1716E/2K)
  • Compact 20-pin SSOP implementation (बनामPCM1717EG4)

डिज़ाइन नोट्स

Separate the I2S data and clock routing from the analog output paths. Keep the digital source and converter supply-return current away from the stereo output region, use a continuous ground reference, and route analog outputs as short and symmetrically as practical. The 20-pin SSOP footprint should be checked against the exact package drawing, especially pin pitch, lead span, and solder mask limits.

Place the required bypass capacitors close to the PCM1717E/2K supply and ground pins, and follow the manufacturer layout example for capacitor type and placement. Confirm the allowable supply range, sequencing, and digital input limits before connecting system rails. Where multiple supplies exist, bring them up in the sequence specified by the manufacturer datasheet rather than assuming all rails can be enabled simultaneously.

Treat the system clock as a sensitive signal even at 48 kHz sample rate because the converter can require a multiplied internal operating clock. Use short clock routing, a continuous return path, and termination only when required by the source and datasheet timing guidance. Avoid introducing test pads, long jumpers, or branches in the clock and I2S nets near the converter.

Do not substitute PCM1717 family order codes solely because their descriptions look similar. Check the ordering table for temperature grade, terminal finish, green-part status, and reel configuration. For any replacement, also compare clock requirements, analog output level, output impedance, and all pin names. A PCB footprint match alone does not guarantee functional or qualification equivalence.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The verified product listings identify the PCM1717E family and lead-free-related ordering variants, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declarations are included in the supplied product records. AEC-Q100 is not applicable to this conventional consumer-audio DAC.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

pcm1717e datasheet PCM1717E/2K datasheet PCM1717E/2K pinout PCM1717E/2K datasheet pdf PCM1717E/2K equivalent PCM1717E/2K replacement PCM1717E/2K cross reference PCM1717E/2K vs PCM1717E PCM1717E/2K application circuit PCM1717E 20 pin SSOP PCM1717E/2K price PCM1717E/2K stock Texas Instruments PCM1717E/2K PCM1717E/2K 18 bit stereo DAC

संबंधित कंपोनेंट्स और शब्द

Texas Instruments PCM1717E/2K PCM1717E PCM1717EG PCM1717EG4 PCM1717E/2KG4 PCM1716E/2K digital-to-analog converter DAC stereo DAC delta-sigma converter I2S 18-bit resolution 48 kHz sampling rate audio ADC/DAC analog audio output 20-pin SSOP SSOP package family surface-mount package CD-player audio multimedia audio digital audio interface Texas Instruments cross-reference search
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें