PIC16CE625T-20/SO - 8-Bit 20MHz MCU 3.5KB OTP | Microchip
MPN: PIC16CE625T-20/SO โ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $4.2 | $4.20 |
| 10 | $3.78 | $37.80 |
| 100 | $3.35 | $335.00 |
| 500 | $2.95 | $1,475.00 |
| 1,000 | $2.62 | $2,620.00 |
PIC16CE625T-20/SO Overview
A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and programmable I/O peripherals. The PIC16CE625 belongs to the PICmicro mid-range family of 8-bit microcontrollers, which historically dominated low-power and cost-sensitive embedded designs. OTP program memory means the device is programmed once at production and is non-erasable, distinguishing it from flash-based PIC16F variants; this positioning makes PIC16CE625 ideally suited for high-volume consumer and industrial applications where cost per unit is paramount and in-field firmware updates are not required.
Key features include 13 programmable digital I/O pins with independent direction control, an internal 4 MHz calibrated RC oscillator, an external oscillator option up to 20 MHz, a 10-bit analog comparator module, a programmable 8-bit timer/counter (TMR0) with 8-bit prescaler, a 16-bit timer/counter (TMR1), and a Watchdog Timer with its own on-chip RC oscillator for reliable operation. The device supports a wide 2.5V to 5.5V supply range, hardware USART/SCI, and includes in-circuit serial programming (ICSP) capability via two dedicated pins, enabling programming after PCB solder. CMOS technology keeps typical active current under 2 mA at 5V/4 MHz and standby current in the microamp range.
Typical applications include appliance control boards, sensor signal conditioning front-ends with on-chip comparator, simple user-interface controllers (LED drivers, keypads), low-cost motor drivers for small DC fans and solenoids, and battery-powered portable instruments where the EEPROM data memory can store user settings and calibration values. The 18-SOIC wide-body package allows hand-soldering and rework while still providing compactness.
When designing with PIC16CE625T-20/SO, select an external clock source that matches the application's timing budget; the 20 MHz ceiling delivers 5 MIPS but increases power dissipation versus 4 MHz operation. Always reserve the ICSPDAT/ICSPCLK pins for in-circuit programming access, and ensure the MCLR pin has the proper pull-up configuration. This page consolidates distributor pricing, drop-in alternatives, and practical engineering guidance not present in the manufacturer datasheet alone.
Drop-in alternatives for PIC16CE625T-20/SO โ same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool โ Select alternative parts for side-by-side comparison:
PIC16CE625T-20E/SO
โ Drop-Inโ In Stock
$2.65 / Unit
View Datasheet โPIC16CE625T-20I/SO
โ Drop-In๐ Reference alternative (not in catalog)
PIC16CE625-20/SO
โ Drop-In๐ Reference alternative (not in catalog)
PIC16CE625T-04I/SO
โ Drop-In๐ Reference alternative (not in catalog)
PIC16CE625-04E/SO
โ Drop-In โ ๏ธ ๅๆฐๅพ ้ช่ฏ๐ Reference alternative (not in catalog)
PIC16F630-I/SO
โ Drop-In๐ Reference alternative (not in catalog)
PIC16CE625T-20/SO Maximum Ratings & Electrical Characteristics
| Core Architecture | PIC 8-bit RISC |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 3.5 KB (2K x 14) |
| Data EEPROM | 128 bytes |
| Data RAM | 128 bytes |
| Maximum Clock Frequency | 20 MHz |
| Instruction Cycle Time | 200 ns (single cycle) |
| Instruction Set | 35 single-word instructions |
| Supply Voltage Range | 2.5 V to 5.5 V |
| I/O Pins | 13 |
| Timers | TMR0 (8-bit), TMR1 (16-bit) |
| Analog Comparator | Yes, 10-bit |
| Internal Oscillator | 4 MHz calibrated RC |
| Package | 18-SOIC (0.295 inch / 7.50 mm body width) |
| Mounting Type | Surface Mount |
| Operating Temperature | 0C to +70C (commercial) |
| ICSP (In-Circuit Serial Programming) | Yes |
| RoHS Status | Compliant |
PIC16CE625T-20/SO Pin Configuration
| Pin 1 | RA2 โ Port A bit 2 (digital I/O or analog comparator output) |
| Pin 2 | RA3 โ Port A bit 3 (digital I/O, also MCLR alternative) |
| Pin 3 | RA4 โ Port A bit 4 (digital I/O, T0CKI clock input) |
| Pin 4 | RA5 โ Port A bit 5 (digital I/O, OSC1 alternate) |
| Pin 5 | VSS โ Ground reference |
| Pin 6 | RB0 โ Port B bit 0 (digital I/O, INT interrupt) |
| Pin 7 | RB1 โ Port B bit 1 (digital I/O) |
| Pin 8 | RB2 โ Port B bit 2 (digital I/O) |
| Pin 9 | RB3 โ Port B bit 3 (digital I/O) |
| Pin 10 | RB4 โ Port B bit 4 (digital I/O, interrupt-on-change) |
| Pin 11 | RB5 โ Port B bit 5 (digital I/O, interrupt-on-change) |
| Pin 12 | RB6 โ Port B bit 6 (ICSPCLK clock for in-circuit serial programming) |
| Pin 13 | RB7 โ Port B bit 7 (ICSPDAT data for in-circuit serial programming) |
| Pin 14 | VDD โ Positive supply voltage (2.5V to 5.5V) |
| Pin 15 | OSC2 โ Oscillator output (also RA6 alternate on some versions) |
| Pin 16 | OSC1 โ Oscillator input (also RA7 alternate on some versions) |
| Pin 17 | RA0 โ Port A bit 0 (digital I/O or analog comparator input) |
| Pin 18 | RA1 โ Port A bit 1 (digital I/O or analog comparator input) |
Typical Applications
PIC16CE625T-20/SO is suitable for 6 applications: Appliance Control Boards, Sensor Signal Conditioning Front-Ends, User Interface Controllers (LEDs, Keypads), Low-Cost Motor Drivers (Small DC Fans, Solenoids), Battery-Powered Portable Instruments, Security and Access Control Panels.
Appliance Control Boards
The PIC16CE625T-20/SO fits appliance control boards (washing machines, dishwashers, microwave ovens) because its 3.5 KB OTP memory holds fixed control firmware, 13 I/O pins drive relays and keypads, and the 20 MHz CPU delivers responsive real-time loop execution. The 128-byte EEPROM stores user-set cycles and calibration values that survive power cycles. Its industrial-grade noise immunity and 2.5V-5.5V supply range accommodate the noisy motor environment typical of household appliances.
Recommended
Sensor Signal Conditioning Front-Ends
The PIC16CE625T-20/SO suits analog sensor front-ends where the on-chip 10-bit analog comparator thresholds and conditions signals from thermocouples, photodiodes, or capacitive touch electrodes. Its 20 MHz throughput enables up to 5 MIPS for digital filtering of the conditioned signal, while 128 bytes of RAM hold intermediate filter state. The 128-byte EEPROM retains calibration constants across power cycles, critical for accurate sensor readings in field-deployed instruments.
Recommended
User Interface Controllers (LEDs, Keypads)
For LED drivers and keypad matrix scanners in consumer electronics, the PIC16CE625T-20/SO provides exactly the right mix of 13 digital I/O pins, 3.5 KB code space for state-machine firmware, and 128-byte EEPROM for storing user preferences (volume, brightness). The 20 MHz clock supports multiplexed 7-segment LED scanning without visible flicker. OTP programming prevents unauthorized firmware copying of finished UI designs, an advantage in consumer products.
Recommended
Low-Cost Motor Drivers (Small DC Fans, Solenoids)
The PIC16CE625T-20/SO drives small DC fan motors and solenoid valves via PWM output on TMR0 or TMR1, with the 20 MHz instruction rate providing fine-grained PWM resolution for smooth motor control. The 13 I/O pins handle H-bridge direction signals, tachometer feedback, and fault inputs. EEPROM stores last-used fan speed or valve position across power cycles. Operating from 2.5V-5.5V supports both 3.3V logic-level and 5V driver designs.
Recommended
Battery-Powered Portable Instruments
Battery-powered handheld meters and portable diagnostic tools benefit from the PIC16CE625T-20/SO's CMOS low-power design drawing under 2 mA active at 4 MHz and microamp-range sleep current. The 2.5V minimum supply lets the device run from two AA cells or a single Li-ion cell at 3.0V nominal. EEPROM data memory preserves measurement logs and user settings when batteries are removed. The 18-SOIC package is compact enough for handheld form factors.
Recommended
Security and Access Control Panels
The PIC16CE625T-20/SO is used in security keypad panels and simple access control readers where OTP memory protects the proprietary authentication algorithm from extraction. The 13 I/O pins drive the keypad matrix, status LEDs, relay output for door strikes, and serial link to a central controller. The 128-byte EEPROM stores encrypted credential data that survives power-loss events. Industrial-grade ESD performance makes it suitable for installation in electrically noisy environments.
Recommended
Recommended Products Summary
Engineering reference data for PIC16CE625T-20/SO โ comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC16CE625T-20E/SO | PIC16CE625T-20I/SO | PIC16CE625-20/SO | PIC16F630-I/SO |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 18-SOIC | 18-SOIC | 18-SOIC | 18-SOIC | 18-SOIC |
| Program Memory Type | OTP (3.5 KB) | OTP (3.5 KB) | OTP (3.5 KB) | OTP (3.5 KB) | Flash (1.75 KB) |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Data EEPROM | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| Data RAM | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 64 bytes |
| Operating Temperature | 0C to +70C (commercial) | -40C to +125C (extended) | -40C to +85C (industrial) | 0C to +70C (commercial) | -40C to +85C (industrial) |
| Packaging Format | Tape & Reel | Tape & Reel | Tape & Reel | Tube | Tube |
| Unit Price (qty 1) | USD 4.20 | USD 4.35 | USD 4.50 | USD 4.20 | USD 2.40 |
Key Differentiators
- Same-brand drop-in with extended temperature range (vs PIC16CE625T-20E/SO)
- Flash-based drop-in for design iteration (vs PIC16F630-I/SO)
- Tube packaging variant for prototyping (vs PIC16CE625-20/SO)
Design Notes
The PIC16CE625T-20/SO supply range is 2.5V to 5.5V. Decouple VDD (pin 14) with a 100 nF ceramic capacitor placed within 5 mm of the pin and a 10 uF tantalum or aluminum bulk capacitor at the board's power entry. For battery applications drawing under 1 mA average, add a 100 kohm pull-up on MCLR (pin 4 configured as RA3/MCLR) to ensure defined reset behavior at power-up.
Place the 18-SOIC footprint on a 300-mil-wide SOIC land pattern, ensuring the ICSP pins RB6 (pin 12) and RB7 (pin 13) are routed to test pads or a 6-pin ICSP header for in-circuit serial programming. Keep the OSC1/OSC2 traces short and surrounded by ground pour to minimize clock noise coupling into adjacent analog comparator inputs on RA0/RA1.
PIC16CE625 OTP memory cannot be erased or reprogrammed. Before OTP programming in production, always validate firmware on a flash-equivalent PIC16F630 or PIC16F676 prototype. Brown-out detection must be enabled via the CONFIG register to avoid code runaway at low VDD, and the Watchdog Timer should be enabled in long-loop firmware to recover from unexpected hangs.
Compliance Information
RoHS and REACH compliance confirmed by Microchip product page and DigiKey listing. Not AEC-Q100 qualified for automotive applications; the PIC16CE625T-20E/SO industrial variant is recommended for non-automotive extended-temperature designs.