Microchip Technology

PIC24HJ16GP304-E/PT - 40 MIPS 16-Bit MCU | Microchip

MPN: PIC24HJ16GP304-E/PT ✓ Active
3 V to 3.6 V Vdss 44-pin TQFP, 10 mm x 10 mm Package 20 MHz Speed 16 KB (5.5K x 24 words) Memory
MOQ: 1 |

PIC24HJ16GP304-E/PT Overview

The Microchip Technology PIC24HJ16GP304-E/PT is a 16-bit PIC24H microcontroller delivering 40 MIPS, with 16 KB of Flash program memory organized as 5.5K x 24 words, 2 KB of SRAM, and 21 I/O ports. The device operates from a 3 V to 3.6 V supply and is packaged in a 44-pin TQFP measuring 10 mm by 10 mm.

A PIC24H microcontroller is a high-performance embedded-control device built around a 16-bit modified Harvard architecture. Its instruction set, addressing modes, and 40 MIPS execution rate are intended for applications involving high-speed repetitive computation, motor control, signal conversion, and real-time control. The PIC24HJ16GP304 also supports peripheral functions associated with the PIC24H family, making it suitable for compact control systems that require more computation than an 8-bit MCU provides.

Key device characteristics include 16 KB of Flash memory, 2 KB of SRAM, a 16-bit CPU operating at 40 MIPS, a 20 MHz clock rating, and 21 available I/O ports. Its 3 V to 3.6 V operating range places it in the low-voltage embedded-control category. The /PT ordering option identifies the 44-pin TQFP configuration supplied in a tray, providing a conventional surface-mount footprint for industrial and commercial control boards.

The PIC24H family employs a 16-bit modified Harvard architecture with an enhanced instruction set and multiple addressing modes. This architecture separates instruction handling from data operations while supporting high-throughput control algorithms. The 5.5K x 24-word Flash organization is suited to firmware containing interrupt routines, communication handlers, control loops, and application-specific algorithms, while the 2 KB SRAM supports working variables and buffer management.

Typical uses include industrial motor and motion control, digital power conversion, data acquisition, communications equipment, and compact embedded instruments. The 40 MIPS performance permits control calculations to execute with less polling overhead than many lower-complexity microcontrollers, while the 21 I/O pins allow external sensors, power devices, communication transceivers, and status indicators to be connected without an additional interface controller.

PCB implementation should preserve clean analog and digital return paths, place decoupling capacitors close to the power pins, and route high-current or switching outputs away sensitive measurement inputs. Firmware development requires the appropriate PIC24H compiler, linker, programmer, and debugger configuration for the selected device and package.

This product record combines the manufacturer’s device information with package, memory, performance, and sourcing details. It also organizes drop-in temperature-grade options, practical design guidance, selection criteria, and application guidance for engineers evaluating the PIC24HJ16GP304-E/PT.

Drop-in alternatives for PIC24HJ16GP304-E/PT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with PIC24HJ16GP304-E/PT (same form factor and footprint) — differing in Package, ADC, Communication, Operating Temperature, Timers.

Microchip Technology
Package: 44-pin TQFP (10x10 mm, PT suffix)
ADC: 10/12-bit, multi-channel
Communication: UART, SPI, I2C
Microchip Technology
Package: 44-pin TQFP (10x10 mm)
ADC: 12-bit, up to 13 channels
Communication: 2x UART/SPI/I2C, 2x CAN 2.0B

PIC24HJ16GP304-I/PT

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 44-TQFP (10x10 mm)
PIC24H 16-bit · 40 MIPS · 16 KB Flash (5.5K x 24) · 2 KB · 3.0 V to 3.6 V · 12-bit, up to 13 channels · 35 · Five 16-bit

Contact for price

View Datasheet →

PIC24HJ16GP304-H/PT

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 44-TQFP (10x10 mm)
PIC24H 16-bit modified Harvard · 16-bit data path, 16x16 hardware multiply · 16 KB (5.5K x 24 instruction words) · 2 KB · 40 MIPS (20 MHz instruction clock, Fosc up to 80 MHz with PLL) · 3.0 V to 3.6 V · 21 · -40C to +150C (H grade junction, automotive)

Contact for price

View Datasheet →

PIC24HJ16GP304-E/PT Maximum Ratings & Electrical Characteristics

Microcontroller Type 16-bit MCU
CPU Performance 40 MIPS
CPU Architecture 16-bit modified Harvard architecture
Maximum Clock Speed 20 MHz
Flash Memory 16 KB (5.5K x 24 words)
SRAM 2 KB
Operating Supply Voltage 3 V to 3.6 V
I/O Port Count 21 ports
Package 44-pin TQFP, 10 mm x 10 mm
Mounting Type Surface mount
Program Memory Type Flash
Device Family PIC24H 16-bit family
Pin Count 44 pins

PIC24HJ16GP304-E/PT 44-pin tqfp, 10 mm x 10 mm Pin Configuration Guide

Pin configuration for PIC24HJ16GP304-E/PT (44-pin tqfp, 10 mm x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

44-pin tqfp, 10 mm x 10 mm package pinout diagram for PIC24HJ16GP304-E/PT

No detailed pinout data available for PIC24HJ16GP304-E/PT.

Refer to the datasheet for full pin configuration.

Typical Applications

PIC24HJ16GP304-E/PT is suitable for 6 applications: Industrial Motor Control, Digital Power Conversion, Data Acquisition and Instrumentation, Communications Controller, Embedded Control and Monitoring, LED and Display Control.

🏭

Industrial Motor Control

The PIC24HJ16GP304-E/PT fits compact motor-control systems that require deterministic computation without a higher-cost control processor. Its 40 MIPS execution rate supports speed, position, and current-control calculations, while the 16-bit modified Harvard architecture provides the instruction throughput needed for repetitive control loops. The 21 I/O ports can connect position sensors, control switches, fault signals, and gate-driver interfaces. Designers can place the controller between a power stage and the system supervisor. With 16 KB of Flash available for control and diagnostic firmware, the device is most practical when the application does not require complex graphics, large protocol stacks, or extensive event logging. The 3 V to 3.6 V operating range also permits a shared regulated 3.3 V rail.

⚡

Digital Power Conversion

The PIC24HJ16GP304-E/PT can serve as the supervisory and control element in a digitally controlled power converter. At 40 MIPS, the CPU can execute compensation and supervisory routines while responding to current, voltage, and fault inputs. The 16 KB Flash stores control code and nonvolatile parameters, and the 2 KB SRAM supports sampled measurements and calculation buffers. Its 21 I/O ports provide access to sensor signals, pulse-width-modulation outputs, enable lines, and protection status. The device should be paired with dedicated analog front ends and power switches, since the microcontroller is responsible for control logic rather than direct high-power switching. A 3.3 V rail and careful grounding help maintain stable measurements in mixed-signal converters.

🔧

Data Acquisition and Instrumentation

The PIC24HJ16GP304-E/PT is appropriate for compact measurement instruments that combine signal conditioning, sampling supervision, and a local communications interface. Its 40 MIPS rating provides sufficient computational headroom for filtering, calibration, and sensor linearization, while the 16-bit CPU supports efficient handling of multiple data paths. Sixteen kilobytes of Flash accommodates firmware and calibration constants, and 2 KB of SRAM can hold acquisition buffers. The 21 available I/O ports allow integration of analog sensor inputs through external converters, digital transducers, display controls, and communication transceivers. For accurate results, analog and digital sections should use controlled grounding and separate return paths. Firmware should also include range checks, sensor diagnostics, and safe handling of out-of-range measurements.

🌐

Communications Controller

The PIC24HJ16GP304-E/PT can manage a low-to-moderate-rate communications interface in embedded equipment that also requires local control. The 40 MIPS throughput leaves substantial processing capacity for framing, checksums, protocol timers, and supervisory tasks, while the 16-bit architecture supports efficient manipulation of buffers and protocol fields. Its 2 KB SRAM is suitable for short frame buffers and state variables, and the 21 I/O ports provide connections to a serial transceiver, status indicators, and configuration controls. The 3 V to 3.6 V operating range aligns with common 3.3 V communications hardware. Designers should use the manufacturer’s timing, peripheral, and electrical guidance to avoid placing interrupt-heavy traffic on pins that are also needed for critical control functions.

🧩

Embedded Control and Monitoring

The PIC24HJ16GP304-E/PT suits compact monitoring controllers that must combine real-time input evaluation with local supervisory functions. Its 40 MIPS performance allows the firmware to scan sensors, update filters, enforce thresholds, and maintain system state without relying on continuous host intervention. The 21 I/O ports support digital sensors, alarm outputs, communication lines, and human-interface controls, while the 16 KB Flash supports structured firmware and diagnostics. Its 2 KB SRAM is adequate for working buffers when data logging is handled by an external memory interface or storage device. The 3.3 V operating range simplifies integration with industrial and commercial logic. A robust design should include brownout handling, watchdog recovery, and deliberate separation between safety-critical shutdown signals and ordinary status indicators.

💡

LED and Display Control

The PIC24HJ16GP304-E/PT can act as the control processor for an LED-lighting or display subsystem requiring sequenced outputs and system feedback. Its 40 MIPS throughput supports timing updates, dimming calculations, fault monitoring, and communication updates, while the 21 I/O ports provide a practical interface to driver-enable lines, color controls, status LEDs, and user inputs. The 16 KB Flash stores animation tables, calibration values, and control firmware, and the 2 KB SRAM supports display buffers. The microcontroller should drive logic-level commands rather than the LED current directly; suitable external driver stages provide the required voltage and current. Firmware should coordinate startup order to prevent visible flashes or excessive inrush, while the PCB should keep switching-driver return currents away from sensitive control and communication traces.

Recommended Products Summary

PIC24HJ32GP204 Related PIC24H family controller with additional memory Used in: Industrial Motor Control, Communications Controller PIC24HJ32GP202 Related PIC24H controller for applications requiring more firmware space Used in: Digital Power Conversion, Embedded Control and Monitoring PIC24HJ16GP304 Base family device used for additional board variants Used in: Data Acquisition and Instrumentation, LED and Display Control
What is the clock speed of the PIC24HJ16GP304-E/PT?
The PIC24HJ16GP304-E/PT has a maximum clock speed of 20 MHz and delivers 40 MIPS of instruction throughput. According to the Microchip PIC24HJ32GP202/204 and PIC24HJ16GP304 data sheet, the device uses a 16-bit modified Harvard architecture with an enhanced instruction set and multiple addressing modes. Designers should use the device’s maximum operating frequency only with the clock, power, decoupling, and layout conditions specified by Microchip.
How much Flash and SRAM does the PIC24HJ16GP304-E/PT have?
The PIC24HJ16GP304-E/PT contains 16 KB of Flash program memory organized as 5.5K x 24 words and 2 KB of SRAM. The Flash organization and 16-bit architecture support interrupt handlers, communication protocols, and real-time control firmware, while SRAM accommodates working variables and temporary buffers. These values match the manufacturer’s PIC24H family documentation and the exact-device listings for the /PT configuration.
What is the operating voltage of the PIC24HJ16GP304-E/PT?
The PIC24HJ16GP304-E/PT operates from 3 V to 3.6 V. This low-voltage range supports compact embedded-control equipment that uses a regulated 3.3 V rail. According to the Microchip PIC24H family data sheet, the device also requires correct decoupling and power-up behavior for reliable operation. Verify signal levels and external peripheral tolerances against the 3.6 V maximum supply condition before finalizing the board design.
What package does the PIC24HJ16GP304-E/PT use?
The PIC24HJ16GP304-E/PT uses a 44-pin TQFP package measuring 10 mm by 10 mm. The /PT ordering code identifies the tray-packaged TQFP configuration. Microchip’s 16-bit PIC24H documentation describes the family as pin compatible with the dsPIC33F family, but a footprint comparison and a review of the complete device pin table should still be performed before reusing an existing board.
Where can I download the PIC24HJ16GP304 datasheet PDF?
The official PIC24HJ16GP304 data sheet is available from Microchip through the manufacturer-hosted PDF at https://ww1.microchip.com/downloads/en/DeviceDoc/70289J.pdf. It covers the PIC24HJ32GP202/204 and PIC24HJ16GP304 families, including the CPU architecture, memory organization, peripherals, package information, and device connections. Use the pin-description and electrical-characteristics sections when assigning PCB functions and calculating operating margins.
Where is the PIC24HJ16GP304-E/PT pinout?
The PIC24HJ16GP304-E/PT pinout is in the pin-configuration and package diagrams in Microchip’s 70289J data sheet. The device uses a 44-pin TQFP package with a 10 mm by 10 mm body. Because the family documentation also covers related devices with different packages and pin counts, select only the diagram labeled for the PIC24HJ16GP304 and confirm every signal against the package-specific pin table before routing the PCB.
What are the key specifications of the PIC24HJ16GP304-E/PT?
The PIC24HJ16GP304-E/PT combines 40 MIPS performance with 16 KB of Flash, 2 KB of SRAM, 21 I/O ports, and a 3 V to 3.6 V supply range in a 44-pin 10 mm x 10 mm TQFP. According to Microchip’s family data sheet, the controller uses a 16-bit modified Harvard architecture with an enhanced instruction set. These figures position the part for embedded systems requiring deterministic control, mixed digital and analog peripherals, and moderate firmware storage.
Is the PIC24HJ16GP304-E/PT suitable for motor control?
The PIC24HJ16GP304-E/PT is suitable for compact motor-control and motion-control systems because it combines 40 MIPS throughput with 16 KB of Flash, 2 KB of SRAM, and 21 I/O ports. The PIC24H architecture is intended for high-speed repetitive computation, allowing position, speed, or current-control calculations to execute with limited overhead. The actual design must also verify motor-driver timing, current sensing, thermal margins, and fault handling against the family data sheet.
Can PIC24HJ16GP304-I/PT replace PIC24HJ16GP304-E/PT?
PIC24HJ16GP304-I/PT is a same-package, pin-compatible family option for designs that do not require the E-grade temperature capability. It retains the 40 MIPS CPU rating, 16 KB Flash memory, 2 KB SRAM, 21 I/O ports, 3 V to 3.6 V supply, and 44-pin TQFP footprint. Confirm the complete temperature limits and any application-specific qualification requirements before approving this substitution, because the ordering-grade suffix is the principal functional distinction.
What is the best drop-in replacement for the PIC24HJ16GP304-E/PT?
PIC24HJ16GP304-I/PT is the verified same-family drop-in option for PCB reuse because it retains the 44-pin TQFP footprint and the same 40 MIPS, 16 KB Flash, and 2 KB SRAM core resources. No cross-brand drop-in replacement could be established from the available manufacturer and distributor information. Before replacing the E-grade device, compare the temperature range, qualification requirements, and operating-life expectations for the complete product rather than relying on package compatibility alone.
When should I choose the PIC24HJ16GP304-E/PT over another PIC24H controller?
Choose the PIC24HJ16GP304-E/PT when a design needs a 40 MIPS 16-bit core, 16 KB Flash, 2 KB SRAM, 21 I/O ports, and a 3 V to 3.6 V supply in a 44-pin TQFP footprint. Select a controller with more Flash or SRAM when the application cannot fit within those memory limits. Select a different package when board area, lead pitch, assembly capability, or pin availability makes the 10 mm x 10 mm TQFP unsuitable.
Is there a Microchip Technology equivalent with more memory for the PIC24HJ16GP304-E/PT?
The PIC24HJ32GP202 and PIC24HJ32GP204 appear in the same manufacturer family documentation, but a larger memory device is not automatically a drop-in replacement. The target provides 16 KB of Flash and 2 KB of SRAM, while related PIC24HJ32 devices have different memory capacities and may have different pin availability. Use the exact package pin table and device-specific specifications to determine whether a related part preserves the required footprint and peripheral connections.
Where can I buy the PIC24HJ16GP304-E/PT?
The PIC24HJ16GP304-E/PT can be requested through the Request a Quote form on this page. The form lets buyers specify quantity, tray packaging requirements, target delivery timing, and shipment details without relying on a static price. Current commercial terms should be confirmed through that channel because component availability and lead time can change independently of the device’s active lifecycle status.
What is the lead time and stock status of the PIC24HJ16GP304-E/PT?
Current stock, minimum order quantity, and lead time for the PIC24HJ16GP304-E/PT should be requested through the Request a Quote form on this page. Microchip lists the base PIC24HJ16GP304 family as active, but lifecycle status does not by itself guarantee an immediate allocation of a particular package and packing option. Include the required quantity, manufacturing schedule, and tray or reel preference in the request.
What is the price of the PIC24HJ16GP304-E/PT?
The current commercial price for the PIC24HJ16GP304-E/PT should be obtained through the Request a Quote form on this page. The quote can account for the exact /PT ordering code, quantity, tray packaging, and delivery requirements. Because distributor inventory and volume terms can change, use the form for a current offer rather than relying on historical catalog pricing.
Does the PIC24HJ16GP304-E/PT comply with RoHS, REACH, or AEC-Q100?
The RoHS, REACH, and AEC-Q100 status of the exact PIC24HJ16GP304-E/PT ordering code should be confirmed with Microchip before a regulated production release. A distributor listing for the base family does not automatically establish every declaration for a specific package, temperature grade, or qualification suffix. Request current compliance documentation and the applicable declaration of conformity as part of product qualification.

Engineering reference data for PIC24HJ16GP304-E/PT — comparison, design guidance, and compliance information.

Selection Guide

Choose PIC24HJ16GP304-E/PT for a 3.3 V embedded-control design that requires 40 MIPS performance, 16 KB of Flash, 2 KB of SRAM, and 21 I/O ports in a 44-pin TQFP package. Select PIC24HJ16GP304-I/PT when the PCB can be reused and the I-grade temperature characteristics better fit the deployment, provided its limits satisfy the product requirement. Select PIC24HJ16GP304-H/PT when its ordering-grade characteristics are appropriate for the target qualification and operating environment. Both alternatives retain the core resources and footprint, so the decision should focus on temperature grade, qualification, lifecycle, and sourcing rather than layout changes. If the application exceeds 16 KB of Flash or 2 KB of SRAM, consider a related PIC24H controller with more memory and verify its complete package pin list before treating it as a replacement.

Comparison with Alternatives

Parameter This Product PIC24HJ16GP304-I/PT PIC24HJ16GP304-H/PT
Package 44-TQFP (10x10 mm) 44-TQFP (10x10 mm) 44-TQFP (10x10 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
CPU Performance 40 MIPS 40 MIPS 40 MIPS
Maximum Clock Speed 20 MHz 20 MHz 20 MHz
Flash Memory 16 KB (5.5K x 24 words) 16 KB (5.5K x 24 words) 16 KB (5.5K x 24 words)
SRAM 2 KB 2 KB 2 KB
Operating Supply Voltage 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V
I/O Port Count 21 ports 21 ports 21 ports
CPU Architecture 16-bit modified Harvard architecture 16-bit modified Harvard architecture 16-bit modified Harvard architecture
Ordering-Grade Code E/PT I/PT H/PT

Key Differentiators

  • 40 MIPS control throughput with 16 KB of Flash (vs PIC24HJ16GP304-I/PT)
  • Direct PCB reuse across same-package ordering-grade options (vs PIC24HJ16GP304-H/PT)
  • Integrated 16-bit control performance in a 10 mm x 10 mm TQFP (vs PIC24HJ16GP304-I/PT)

Design Notes

Use a regulated 3.3 V rail within the documented 3 V to 3.6 V operating range. Place the required bypass capacitors close to the device supply pins and keep the high-current return path away from sensitive analog inputs. The controller can supervise a power-conversion system, but it must not be used as the sole high-current switching element. Any power-good, undervoltage, or shutdown path should remain functional during reset and firmware lockout conditions.

Confirm every assignment against the package-specific 44-pin TQFP diagram in Microchip’s family data sheet rather than relying on a diagram for a different member of the PIC24HJ32GP202/204 or PIC24HJ16GP304 group. Preserve the exposed perimeter-pad layout and thermal-via pattern specified for the selected package. Route oscillator, reset, and programming-related signals away from high-current switching nodes to reduce susceptibility to induced noise and false clock or reset events.

For mixed-signal equipment, partition the PCB into digital control, analog measurement, and power-driver areas. Keep sensor returns and reference planes continuous where possible, and route digital communication and pulse-width-modulation outputs away from sensitive inputs. Place termination, filtering, and protection components close to the connector or source of interference. This layout discipline is important because the 40 MIPS processor and its peripherals cannot correct analog errors introduced by routing or ground bounce.

Do not treat the 16 KB Flash figure as a 16K x 24-byte capacity; the device is organized as 5.5K x 24 words. Also verify the ordering code and package suffix before programming or purchasing, because the PIC24HJ16GP304-I/PT and PIC24HJ16GP304-H/PT alternatives share the core resources and footprint but differ in ordering-grade characteristics. Use the exact device configuration in the programming tool and verify oscillator, reset, and peripheral settings after programming.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance declarations for the exact ordering code must be confirmed with Microchip. The part is categorized as an industrial microcontroller for this record, but no exact-code AEC-Q100 qualification statement was established.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

pic24hj16gp304 datasheet PIC24HJ16GP304-E/PT datasheet pdf PIC24HJ16GP304-E/PT pinout PIC24HJ16GP304-E/PT specifications PIC24HJ16GP304 40 MIPS PIC24HJ16GP304 16KB Flash PIC24HJ16GP304 44 TQFP pinout PIC24HJ16GP304-E/PT replacement PIC24HJ16GP304-E/PT equivalent PIC24HJ16GP304-I/PT vs PIC24HJ16GP304-E/PT PIC24HJ16GP304-E/PT price PIC24HJ16GP304-E/PT stock Microchip PIC24HJ16GP304-E/PT PIC24HJ16GP304 motor control application What are the key specifications of PIC24HJ16GP304-E/PT?

Related Components & Terms

Microchip Technology PIC24HJ16GP304-E/PT PIC24HJ16GP304 PIC24HJ16GP304-I/PT PIC24HJ16GP304-H/PT PIC24HJ32GP202 PIC24HJ32GP204 PIC24H PIC24H 16-bit microcontroller 16-bit modified Harvard architecture embedded controller microcontroller semiconductor 40 MIPS 20 MHz clock 16 KB Flash memory 5.5K x 24-word program memory 2 KB SRAM 21 I/O ports 3 V to 3.6 V supply 44-pin TQFP 10 mm x 10 mm package motor control digital power conversion data acquisition industrial control
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details