PIC24HJ16GP304-E/PT - 40 MIPS 16-Bit MCU | Microchip
MPN: PIC24HJ16GP304-E/PT ✓ 啟用中PIC24HJ16GP304-E/PT 概覽
A PIC24H microcontroller is a high-performance embedded-control device built around a 16-bit modified Harvard architecture. Its instruction set, addressing modes, and 40 MIPS execution rate are intended for applications involving high-speed repetitive computation, motor control, signal conversion, and real-time control. The PIC24HJ16GP304 also supports peripheral functions associated with the PIC24H family, making it suitable for compact control systems that require more computation than an 8-bit MCU provides.
Key device characteristics include 16 KB of Flash memory, 2 KB of SRAM, a 16-bit CPU operating at 40 MIPS, a 20 MHz clock rating, and 21 available I/O ports. Its 3 V to 3.6 V operating range places it in the low-voltage embedded-control category. The /PT ordering option identifies the 44-pin TQFP configuration supplied in a tray, providing a conventional surface-mount footprint for industrial and commercial control boards.
The PIC24H family employs a 16-bit modified Harvard architecture with an enhanced instruction set and multiple addressing modes. This architecture separates instruction handling from data operations while supporting high-throughput control algorithms. The 5.5K x 24-word Flash organization is suited to firmware containing interrupt routines, communication handlers, control loops, and application-specific algorithms, while the 2 KB SRAM supports working variables and buffer management.
Typical uses include industrial motor and motion control, digital power conversion, data acquisition, communications equipment, and compact embedded instruments. The 40 MIPS performance permits control calculations to execute with less polling overhead than many lower-complexity microcontrollers, while the 21 I/O pins allow external sensors, power devices, communication transceivers, and status indicators to be connected without an additional interface controller.
PCB implementation should preserve clean analog and digital return paths, place decoupling capacitors close to the power pins, and route high-current or switching outputs away sensitive measurement inputs. Firmware development requires the appropriate PIC24H compiler, linker, programmer, and debugger configuration for the selected device and package.
This product record combines the manufacturer’s device information with package, memory, performance, and sourcing details. It also organizes drop-in temperature-grade options, practical design guidance, selection criteria, and application guidance for engineers evaluating the PIC24HJ16GP304-E/PT.
直接替換替代品,適用於 PIC24HJ16GP304-E/PT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24HJ16GP304-E/PT (相同外形與佔位) — 差異在於 Package, ADC, Communication, Operating Temperature, Timers.
PIC24HJ16GP304-I/PT
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC24HJ16GP304-H/PT
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC24HJ16GP304-E/PT 最大額定值與電氣特性
| Microcontroller Type | 16-bit MCU |
| CPU Performance | 40 MIPS |
| CPU Architecture | 16-bit modified Harvard architecture |
| Maximum Clock Speed | 20 MHz |
| Flash Memory | 16 KB (5.5K x 24 words) |
| SRAM | 2 KB |
| 工作電源電壓 | 3 V to 3.6 V |
| I/O Port Count | 21 ports |
| 封裝 | 44-pin TQFP, 10 mm x 10 mm |
| 安裝類型 | Surface mount |
| Program Memory Type | Flash |
| Device Family | PIC24H 16-bit family |
| 腳位數 | 44 pins |
PIC24HJ16GP304-E/PT 44-pin tqfp, 10 mm x 10 mm 腳位配置指南
PIC24HJ16GP304-E/PT(44-pin tqfp, 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24HJ16GP304-E/PT.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24HJ16GP304-E/PT 適用於 6 應用s: Industrial Motor Control, Digital Power Conversion, Data Acquisition and Instrumentation, Communications Controller, Embedded Control and Monitoring, LED and Display Control.
Industrial Motor Control
The PIC24HJ16GP304-E/PT fits compact motor-control systems that require deterministic computation without a higher-cost control processor. Its 40 MIPS execution rate supports speed, position, and current-control calculations, while the 16-bit modified Harvard architecture provides the instruction throughput needed for repetitive control loops. The 21 I/O ports can connect position sensors, control switches, fault signals, and gate-driver interfaces. Designers can place the controller between a power stage and the system supervisor. With 16 KB of Flash available for control and diagnostic firmware, the device is most practical when the application does not require complex graphics, large protocol stacks, or extensive event logging. The 3 V to 3.6 V operating range also permits a shared regulated 3.3 V rail.
推薦
Digital Power Conversion
The PIC24HJ16GP304-E/PT can serve as the supervisory and control element in a digitally controlled power converter. At 40 MIPS, the CPU can execute compensation and supervisory routines while responding to current, voltage, and fault inputs. The 16 KB Flash stores control code and nonvolatile parameters, and the 2 KB SRAM supports sampled measurements and calculation buffers. Its 21 I/O ports provide access to sensor signals, pulse-width-modulation outputs, enable lines, and protection status. The device should be paired with dedicated analog front ends and power switches, since the microcontroller is responsible for control logic rather than direct high-power switching. A 3.3 V rail and careful grounding help maintain stable measurements in mixed-signal converters.
推薦
Data Acquisition and Instrumentation
The PIC24HJ16GP304-E/PT is appropriate for compact measurement instruments that combine signal conditioning, sampling supervision, and a local communications interface. Its 40 MIPS rating provides sufficient computational headroom for filtering, calibration, and sensor linearization, while the 16-bit CPU supports efficient handling of multiple data paths. Sixteen kilobytes of Flash accommodates firmware and calibration constants, and 2 KB of SRAM can hold acquisition buffers. The 21 available I/O ports allow integration of analog sensor inputs through external converters, digital transducers, display controls, and communication transceivers. For accurate results, analog and digital sections should use controlled grounding and separate return paths. Firmware should also include range checks, sensor diagnostics, and safe handling of out-of-range measurements.
推薦
Communications Controller
The PIC24HJ16GP304-E/PT can manage a low-to-moderate-rate communications interface in embedded equipment that also requires local control. The 40 MIPS throughput leaves substantial processing capacity for framing, checksums, protocol timers, and supervisory tasks, while the 16-bit architecture supports efficient manipulation of buffers and protocol fields. Its 2 KB SRAM is suitable for short frame buffers and state variables, and the 21 I/O ports provide connections to a serial transceiver, status indicators, and configuration controls. The 3 V to 3.6 V operating range aligns with common 3.3 V communications hardware. Designers should use the manufacturer’s timing, peripheral, and electrical guidance to avoid placing interrupt-heavy traffic on pins that are also needed for critical control functions.
推薦
Embedded Control and Monitoring
The PIC24HJ16GP304-E/PT suits compact monitoring controllers that must combine real-time input evaluation with local supervisory functions. Its 40 MIPS performance allows the firmware to scan sensors, update filters, enforce thresholds, and maintain system state without relying on continuous host intervention. The 21 I/O ports support digital sensors, alarm outputs, communication lines, and human-interface controls, while the 16 KB Flash supports structured firmware and diagnostics. Its 2 KB SRAM is adequate for working buffers when data logging is handled by an external memory interface or storage device. The 3.3 V operating range simplifies integration with industrial and commercial logic. A robust design should include brownout handling, watchdog recovery, and deliberate separation between safety-critical shutdown signals and ordinary status indicators.
推薦
LED and Display Control
The PIC24HJ16GP304-E/PT can act as the control processor for an LED-lighting or display subsystem requiring sequenced outputs and system feedback. Its 40 MIPS throughput supports timing updates, dimming calculations, fault monitoring, and communication updates, while the 21 I/O ports provide a practical interface to driver-enable lines, color controls, status LEDs, and user inputs. The 16 KB Flash stores animation tables, calibration values, and control firmware, and the 2 KB SRAM supports display buffers. The microcontroller should drive logic-level commands rather than the LED current directly; suitable external driver stages provide the required voltage and current. Firmware should coordinate startup order to prevent visible flashes or excessive inrush, while the PCB should keep switching-driver return currents away from sensitive control and communication traces.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24HJ16GP304-E/PT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24HJ16GP304-I/PT | PIC24HJ16GP304-H/PT |
|---|---|---|---|
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Performance | 40 MIPS | 40 MIPS | 40 MIPS |
| Maximum Clock Speed | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 16 KB (5.5K x 24 words) | 16 KB (5.5K x 24 words) | 16 KB (5.5K x 24 words) |
| SRAM | 2 KB | 2 KB | 2 KB |
| Operating Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| I/O Port Count | 21 ports | 21 ports | 21 ports |
| CPU Architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture |
| Ordering-Grade Code | E/PT | I/PT | H/PT |
主要差異化特點
- 40 MIPS control throughput with 16 KB of Flash (對比PIC24HJ16GP304-I/PT)
- Direct PCB reuse across same-package ordering-grade options (對比PIC24HJ16GP304-H/PT)
- Integrated 16-bit control performance in a 10 mm x 10 mm TQFP (對比PIC24HJ16GP304-I/PT)
設計說明
Use a regulated 3.3 V rail within the documented 3 V to 3.6 V operating range. Place the required bypass capacitors close to the device supply pins and keep the high-current return path away from sensitive analog inputs. The controller can supervise a power-conversion system, but it must not be used as the sole high-current switching element. Any power-good, undervoltage, or shutdown path should remain functional during reset and firmware lockout conditions.
Confirm every assignment against the package-specific 44-pin TQFP diagram in Microchip’s family data sheet rather than relying on a diagram for a different member of the PIC24HJ32GP202/204 or PIC24HJ16GP304 group. Preserve the exposed perimeter-pad layout and thermal-via pattern specified for the selected package. Route oscillator, reset, and programming-related signals away from high-current switching nodes to reduce susceptibility to induced noise and false clock or reset events.
For mixed-signal equipment, partition the PCB into digital control, analog measurement, and power-driver areas. Keep sensor returns and reference planes continuous where possible, and route digital communication and pulse-width-modulation outputs away from sensitive inputs. Place termination, filtering, and protection components close to the connector or source of interference. This layout discipline is important because the 40 MIPS processor and its peripherals cannot correct analog errors introduced by routing or ground bounce.
Do not treat the 16 KB Flash figure as a 16K x 24-byte capacity; the device is organized as 5.5K x 24 words. Also verify the ordering code and package suffix before programming or purchasing, because the PIC24HJ16GP304-I/PT and PIC24HJ16GP304-H/PT alternatives share the core resources and footprint but differ in ordering-grade characteristics. Use the exact device configuration in the programming tool and verify oscillator, reset, and peripheral settings after programming.
合規資訊
Compliance declarations for the exact ordering code must be confirmed with Microchip. The part is categorized as an industrial microcontroller for this record, but no exact-code AEC-Q100 qualification statement was established.