Skyworks Solutions

SI2438-B-FTR - 33.6 kbps ISOmodem | Skyworks Solutions | 24-TSSOP (Tape & Reel)

MPN: SI2438-B-FTR ✓ Active
24-TSSOP Package
MOQ: 1 |

SI2438-B-FTR Overview

Skyworks Solutions Inc. SI2438-B-FTR is a system-side ISOmodem integrated circuit for data, fax, and voice signaling, operating at 33.6 kbps in a 24-pin TSSOP package. The device supports legacy V.34 modem applications and combines modem signal processing with telephone-interface functions for compact communication equipment. It is offered in a lead-free 24-TSSOP configuration for surface-mount assembly.

An ISOmodem is a single-chip implementation of the modulation, demodulation, and signaling functions used to communicate over analog telephone lines. In the broader product hierarchy, an ISOmodem is a communications IC, while a modem IC is a more specific type of network controller and processor. System-side devices work with a counterpart line-side modem to establish data, fax, or voice connections using copper telephone networks.

The SI2438-B-FTR provides a maximum signaling rate of 33.6 kbps, matching the advertised V.34 modem class. Its 24-TSSOP package supports compact, automated PCB assembly while exposing the device's external interface and control functions. The B revision is associated with a lead-free ordering configuration. Applications include embedded telephone systems, fax terminal controllers, data communications equipment, and legacy telephone-line products that require a dedicated modem engine.

Because this is a mixed-signal communications device, board design must account for analog line handling, digital control signals, power-supply quality, and exposed-pad or thermal requirements described by the package documentation. Input and output filtering, isolation boundaries, grounding, and external line-interface components are essential to prevent modulation energy from coupling into sensitive logic. Firmware and host-driver compatibility should also be verified before replacing another modem controller.

The SI2438-B-FTR is most appropriate when a new design deliberately targets V.34-class data and fax connectivity and can accommodate a legacy telephone-line interface. It is not a drop-in substitute for a broadband, Ethernet, wireless, or modern broadband voice terminal, even when those products serve similar end-user functions. Existing products should also be checked for regional analog-network approval and obsolete-part risk.

For a new layout, use the manufacturer's pin-description and layout guidance to assign all 24 pins and connect the required interface components. Review the clock, crystal or timing requirements, line-side connections, reset behavior, and supply decoupling against the device documentation. Preserve the defined exposed-pad connection if the package drawing calls for one, and validate signal integrity from the analog interface through the digital controller.

This product page organizes the confirmed identity, package, speed class, sourcing workflow, alternative-device evidence, and design considerations for the SI2438-B-FTR. It also identifies which engineering details require confirmation in the manufacturer documentation before schematic release or production qualification.

Drop-in alternatives for SI2438-B-FTR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with SI2438-B-FTR (same form factor and footprint) — differing in Supported Functions.

Skyworks Solutions
Supported Functions: Data, fax, and voice
Compare with SI2438-B-FTR →

SI2438-A-FT

✅ Drop-In
Skyworks Solutions
📦 TSSOP-24
ISOmodem V.34 system-side IC · Skyworks Solutions Inc. · V.34 · 56k V.34 · 33.6 kbps · Data, fax, and voice · ISOmodem system-side · 24-TSSOP

Contact for price

View Datasheet →

SI2438-A-FTR

✅ Drop-In
📦 TSSOP-24
Same 33.6 kbps rate and 24-TSSOP package; package suffix and revision details require verification.

📋 Reference alternative (not in catalog)

SI2438-B-GTR

✅ Drop-In
📦 TSSOP-24
Same SI2438 family, 33.6 kbps class, and 24-TSSOP package; ordering suffix and revision behavior require verification.

📋 Reference alternative (not in catalog)

SI2493-FT

✅ Drop-In
📦 TSSOP-24
Same 24-TSSOP package; published comparison identifies a different communication profile, while speed and pin compatibility require verification.

📋 Reference alternative (not in catalog)

SI2418-A-FTR

✅ Drop-In
📦 TSSOP-24
Same 24-TSSOP package and related modem family; voltage, power, and exact pin compatibility require verification.

📋 Reference alternative (not in catalog)

SI2438-B-FTR Specifications

Device Type System-side ISOmodem integrated circuit
Maximum Data Rate 33.6 kbps
Modulation Class V.34
Supported Functions Data, fax, and voice modem signaling
Package 24-TSSOP
Pin Count 24 pins
Mounting Type Surface mount
Lead-Free Configuration Lead-free
Product Category Network Controller and Processor ICs
Telephone Interface Type System-side analog modem interface
AEC-Q100 Qualification not_applicable
Packaging Format Tape & Reel

SI2438-B-FTR 24-tssop Pin Configuration Guide

Pin configuration for SI2438-B-FTR (24-tssop package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

24-tssop package pinout diagram for SI2438-B-FTR

No detailed pinout data available for SI2438-B-FTR.

Refer to the datasheet for full pin configuration.

Typical Applications

SI2438-B-FTR is suitable for 6 applications: Legacy Fax Terminal Controller, Analog Data Communications Equipment, Telephone-Line Voice Messaging, Embedded Industrial Dialer, Point-to-Point Remote Terminal, Multi-Function Communication Controller.

📠

Legacy Fax Terminal Controller

The SI2438-B-FTR is appropriate for a legacy fax terminal that must connect over an analog telephone line and operate in the V.34 modem class. Its 33.6 kbps signaling capability provides a defined function for compressed document-transfer control, while the 24-TSSOP package simplifies compact surface-mount construction. The modem engine is normally paired with host logic, memory, a telephone-network interface, and approved isolation or protection components. Because line signaling is sensitive, keep analog routing away from processor buses and follow the manufacturer's reference interface. Firmware support for the host processor and the target country's telephone-network requirements must also be confirmed before production release.

🌐

Analog Data Communications Equipment

The SI2438-B-FTR can serve as the modem engine in equipment designed for V.34-class data transmission over an analog telephone connection. Its confirmed 33.6 kbps maximum rate makes it relevant to legacy remote-access, point-to-point data, and embedded communication designs. The system must provide the required external line-interface network, signal conditioning, and host-control logic while respecting the device's documented supply and clocking requirements. Engineers should verify connection negotiation, error handling, and line-state behavior in the target application. PCB planning should isolate the analog telephone path and provide controlled return paths so switching activity from the host processor does not degrade modem performance.

🎙️

Telephone-Line Voice Messaging

The SI2438-B-FTR can support a voice-oriented terminal that uses a system-side analog modem for signaling and connection control. Its device class combines data, fax, and voice functions, allowing a shared communications path when the host system also manages document or data-transfer workflows. The implementation requires an approved telephone interface, appropriate line protection, microphone and speaker signal paths where applicable, and host firmware that drives the modem registers. The 24-TSSOP package supports compact designs, but thermal and layout planning remain necessary. Confirm the supported voice modes and electrical timing directly from the controlled manufacturer documentation before selecting the part for a new voice product.

🏭

Embedded Industrial Dialer

A remote monitoring or industrial dialer can use the SI2438-B-FTR when connectivity is required through an analog telephone network rather than an IP or cellular network. The 33.6 kbps V.34 modem function offers a defined communication path for short commands, status reports, and configuration exchanges. The surrounding controller must handle modem initialization, dialing, retries, line-state monitoring, and data framing. Industrial use requires verification of operating-temperature limits, surge exposure, isolation strategy, and enclosure-related thermal conditions. The telephone interface should include the protection and filtering required by the applicable telecom environment. Use the Request a Quote form to request current qualification and compliance documentation for the production configuration.

🖥️

Point-to-Point Remote Terminal

The SI2438-B-FTR is relevant to compact remote terminals that exchange data over an analog telephone connection at V.34-class speeds. A typical design pairs the modem IC with a host microcontroller, nonvolatile storage, a telephone line interface, and a human interface or local control port. Its 33.6 kbps rate is suitable for legacy supervisory data rather than file-intensive broadband traffic. Engineering validation should cover line-noise immunity, startup and shutdown behavior, connection-loss recovery, and timing under variable line conditions. Keep the modem clock and supply rails clean, and validate the complete analog path with the intended telephone network. The same host firmware should not be assumed to work with a revision candidate without driver review.

📞

Multi-Function Communication Controller

The SI2438-B-FTR can serve as the communication engine in a multi-function terminal that combines data, fax, and voice sessions over one telephone interface. Its advertised V.34, 33.6 kbps modem capability provides a unified legacy connectivity solution without requiring separate modem blocks for each service. The controller architecture should separate modem control, host application logic, and telephone-network signaling to simplify fault recovery and firmware maintenance. Because the device is a mixed-signal communications IC, board-level filtering and grounding can influence performance as much as nominal modem speed. Validate timing, register behavior, and regional network compatibility using the manufacturer documentation and a representative line interface before releasing the design.

Recommended Products Summary

SI2438-A-FT Skyworks Solutions Used in: Legacy Fax Terminal Controller, Telephone-Line Voice Messaging, Point-to-Point Remote Terminal SI2438-B-GTR Same-family 24-TSSOP modem candidate Used in: Legacy Fax Terminal Controller, Embedded Industrial Dialer, Multi-Function Communication Controller SI2438-A-FTR Related ISOmodem for compatibility review Used in: Analog Data Communications Equipment, Embedded Industrial Dialer SI2418-A-FTR Related 24-TSSOP modem candidate Used in: Analog Data Communications Equipment, Point-to-Point Remote Terminal SI2493-FT Related 24-TSSOP communications candidate Used in: Telephone-Line Voice Messaging, Multi-Function Communication Controller
What is the SI2438-B-FTR?
The SI2438-B-FTR is a system-side ISOmodem IC that supports data, fax, and voice signaling over analog telephone lines. According to the manufacturer product description, it operates at 33.6 kbps and uses a V.34-class modem architecture. The device is packaged in a 24-pin TSSOP for surface-mount assembly, making it intended for compact embedded telephone and legacy data-communications equipment.
What is the maximum data rate of the SI2438-B-FTR?
The SI2438-B-FTR supports a maximum signaling rate of 33.6 kbps. The manufacturer listing identifies the device as a V.34 modem IC, and the product category describes it as a network controller and processor for data, fax, and voice applications. This rate is appropriate for legacy telephone-line systems and should not be compared directly with Ethernet, broadband, or modern wireless data rates.
What package does the SI2438-B-FTR use?
The SI2438-B-FTR is offered in a 24-pin TSSOP package with a surface-mount assembly configuration. The package outline is commonly identified as 24-TSSOP, corresponding to the 24-pin entry in the component catalog. Use the manufacturer's package drawing for exact body dimensions, lead spacing, pin numbering, and any exposed-pad or thermal-land requirements.
Is the SI2438-B-FTR suitable for fax and data applications?
Yes, the SI2438-B-FTR is designed for data, fax, and voice signaling through a V.34-class modem interface. Its stated 33.6 kbps operation makes it relevant to legacy analog telephone-line products rather than modern IP-based fax or data terminals. Host software, firmware, country-specific line requirements, and the external telephone-network interface must be evaluated before deployment.
Where can I download the SI2438-B-FTR datasheet?
Use the Skyworks Solutions technical-document resources to locate the current SI2438-B-FTR datasheet, then confirm the revision against your production documentation. The device listing identifies the part as a lead-free 24-TSSOP ISOmodem, but a permanent manufacturer PDF link was not established for this page. Request the controlled datasheet and its revision history from Skyworks Solutions before finalizing the schematic.
Where can I find the SI2438-B-FTR pinout?
The SI2438-B-FTR pin assignment must be taken from the manufacturer's 24-TSSOP pin-description table and package drawing. The catalog confirms a 24-pin TSSOP, but it does not establish individual signal names. Use that document to connect supply, ground, clock, modem interface, and control signals; do not infer pin functions from package position alone.
What can replace the SI2438-B-FTR?
The closest documented replacements to evaluate are SI2438-A-FT, SI2438-A-FTR, SI2438-B-GTR, and SI2493-FT because they appear in 24-TSSOP related-device comparisons. Replacement is not automatic: verify exact pin-to-pin compatibility, clock requirements, line-interface behavior, firmware support, and regional modem approval. The target's 33.6 kbps V.34 classification does not by itself prove drop-in equivalence.
Is the SI2438-A-FT the same as the SI2438-B-FTR?
The SI2438-A-FT and SI2438-B-FTR are related 33.6 kbps, 24-TSSOP ISOmodem devices, but they are not proven identical by the published comparison data. Their revisions may differ in electrical limits, qualification, interface behavior, or lifecycle status. Treat the A version as a candidate replacement only after checking the manufacturer pin descriptions, timing diagrams, firmware requirements, and change documentation.
What is the best Skyworks alternative for the SI2438-B-FTR?
The SI2438-B-GTR is the closest same-family alternative to investigate because it shares the 24-TSSOP format and belongs to the SI2438 naming family. The SI2438-A-FT and SI2438-A-FTR are also candidates for compatibility review. Confirm pin-to-pin operation before substitution, especially for clocking, reset, line-interface components, and modem-control software.
SI2438-B-FTR vs SI2438-A-FT: which is better for a new design?
The SI2438-B-FTR is preferable when its current manufacturer documentation, lifecycle status, and qualification match the product requirements. The SI2438-A-FT may be considered only after confirming that its electrical characteristics and control interface satisfy the design. Both are identified as 33.6 kbps, 24-TSSOP ISOmodem devices, so package and headline speed alone do not establish interchangeability.
When should I choose the SI2438-B-FTR instead of a broadband modem IC?
Choose the SI2438-B-FTR only when the product must interoperate with a legacy analog telephone-line network and requires V.34-class data, fax, or voice signaling. Modern Ethernet, broadband, and wireless modem modules provide higher throughput and different physical, software, and regulatory architectures. They are not drop-in replacements for this 24-TSSOP analog-modem device.
Is the SI2438-B-FTR suitable for industrial embedded communication?
The SI2438-B-FTR can be evaluated for embedded equipment that must communicate through an analog telephone line, provided its operating limits, isolation strategy, surge protection, and thermal performance meet the enclosure environment. Industrial qualification requires the exact temperature rating, EMC results, and reliability documents, which should be confirmed from Skyworks Solutions. Do not infer industrial suitability from the package or product category.
How much power does the SI2438-B-FTR consume?
The SI2438-B-FTR power consumption depends on supply voltage, operating mode, clock configuration, line activity, and the external telephone interface. The manufacturer listing confirms a 33.6 kbps, 24-TSSOP device but does not state a definitive supply-current figure. Use the datasheet current table for operating, idle, sleep, and transmit conditions before calculating regulator headroom or thermal dissipation.
Where can I request a quote for the SI2438-B-FTR?
Use the Request a Quote form on this page to request current availability, lead time, and order handling for the SI2438-B-FTR. The form is the appropriate channel for a quote-first electronic-component inquiry and avoids static pricing that can change with quantity or market conditions. Include the target quantity, packaging preference, and any required compliance documentation with the request.
What is the lead time for the SI2438-B-FTR?
Lead time depends on current manufacturer inventory, requested quantity, and supply-chain conditions. Request the current lead time through the Request a Quote form on this page, and state the required production quantity and date. Do not treat distributor availability messages as a guaranteed allocation for a production build.
What are the key specifications of the SI2438-B-FTR that engineers should know?
The SI2438-B-FTR is a 33.6 kbps V.34 system-side ISOmodem IC in a lead-free 24-TSSOP package. Its principal functions are analog-line data, fax, and voice signaling, with operation coordinated through external modem and control hardware. The critical design checks are pin assignment, clocking, line-interface components, supply limits, isolation, thermal implementation, and compatibility with the intended host software.
Is the SI2438-B-FTR RoHS compliant and automotive qualified?
The SI2438-B-FTR is identified as a lead-free configuration, but RoHS and REACH declarations must be confirmed from the current manufacturer compliance documentation. Automotive qualification is not implied by the product description; no AEC-Q100 qualification is established for this part. Use the Request a Quote form to request the material-declaration and qualification documents needed for your application.

Engineering reference data for SI2438-B-FTR — comparison, design guidance, and compliance information.

Selection Guide

Choose the SI2438-B-FTR for a new or maintained product that specifically requires a V.34-class, 33.6 kbps system-side modem over an analog telephone line. Its documented data, fax, and voice functions make it appropriate for legacy multifunction terminals, fax controllers, remote-access equipment, and telephone-line data products. Review SI2438-A-FT, SI2438-A-FTR, or SI2438-B-GTR when an exact same-family replacement is needed, but verify pin assignments, electrical limits, clocking, firmware, and lifecycle status before approving a substitution. Consider SI2493-FT only after confirming that its communication profile and register behavior match the target application. Do not select a broadband, Ethernet, or wireless module merely because it provides equivalent end-user connectivity; those devices require a different physical interface and firmware architecture. For production use, obtain the controlled manufacturer datasheet, qualification documents, and current lifecycle information.

Comparison with Alternatives

Parameter This Product SI2438-A-FT SI2438-A-FTR SI2438-B-GTR SI2493-FT
Package TSSOP-24 TSSOP-24 TSSOP-24 TSSOP-24 TSSOP-24
Brand Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc.
Product Function Data, fax, and voice ISOmodem Data, fax, and voice ISOmodem Data, fax, and voice ISOmodem Data, fax, and voice ISOmodem Communication controller and processor
Pin Count 24 pins 24 pins 24 pins 24 pins 24 pins
Surface-Mount Assembly Yes Yes Yes Yes Yes

Key Differentiators

  • Confirmed 33.6 kbps V.34-class operation (vs SI2493-FT)
  • Unified data, fax, and voice modem functionality (vs SI2418-A-FTR)
  • Lead-free 24-TSSOP production configuration (vs SI2438-A-FT)

Design Notes

Assign the modem interface from the manufacturer's 24-pin description table rather than inferring functions from neighboring pins. Place required decoupling capacitors at their specified power pins, preserve the recommended ground connections, and keep the telephone-line analog network physically separate from processor clocks and high-speed digital traces. A clear partition between the analog line path and digital control section reduces susceptibility to crosstalk and common-impedance noise.

Validate the external line-interface network, clock source, reset timing, and modem-control signals with the intended analog network conditions. Use the manufacturer's reference values for component selection and impedance-controlled routing where specified. Pay particular attention to return paths and grounding around the telephone interface; modem performance can degrade when switching current from the host processor shares a noisy path with the analog section.

Do not treat a shared 24-TSSOP outline as proof of drop-in compatibility. Before substituting a revision candidate, compare pin names, power limits, clock configuration, reset behavior, timing, and host-register or firmware requirements. Confirm that the replacement is intended for the same system-side role. A successful electrical power-on is not sufficient evidence of interoperability, so include connection, data-transfer, fax, and line-recovery tests in the qualification plan.

Estimate dissipation from the selected supply voltage and the device's actual operating current, then compare the resulting junction temperature with its rated limit. Use the manufacturer thermal information for the exact TSSOP package and board implementation. Keep the modem clock and line interface inactive long enough to observe idle behavior, and test the assembled enclosure under maximum expected telephone-line activity rather than relying only on a laboratory supply condition.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Yes
Halogen Free
Unknown
Conflict Minerals
Unknown

The SI2438-B-FTR is identified as a lead-free configuration. RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation through current manufacturer documentation. Automotive qualification is not established.

Related Searches

SI2438-B-FTR SI2438-B-FTR datasheet SI2438-B-FTR pinout SI2438-B-FTR datasheet pdf SI2438-B-FTR equivalent SI2438-B-FTR replacement SI2438-B-FTR cross reference SI2438-B-FTR price SI2438-B-FTR stock Skyworks SI2438-B-FTR SI2438-B-FTR 33.6 kbps modem SI2438-B-FTR 24-TSSOP SI2438-B-FTR analog fax modem SI2438-B-FTR vs SI2438-A-FT SI2438-B-FTR schematic

Related Components & Terms

Skyworks Solutions Inc. SI2438-B-FTR SI2438-A-FT SI2438-A-FTR SI2438-B-GTR SI2493-FT SI2418-A-FTR ISOmodem system-side modem modem IC network controller and processor V.34 modem 33.6 kbps data rate 24-TSSOP TSSOP package family surface-mount technology analog telephone interface data communications fax terminal controller voice signaling mixed-signal IC RoHS REACH lead-free packaging telephone-line data communication
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details