SI2438-B-FTR - 33.6 kbps ISOmodem | Skyworks Solutions | 24-TSSOP (Tape & Reel)
MPN: SI2438-B-FTR ✓ सक्रियSI2438-B-FTR अवलोकन
An ISOmodem is a single-chip implementation of the modulation, demodulation, and signaling functions used to communicate over analog telephone lines. In the broader product hierarchy, an ISOmodem is a communications IC, while a modem IC is a more specific type of network controller and processor. System-side devices work with a counterpart line-side modem to establish data, fax, or voice connections using copper telephone networks.
The SI2438-B-FTR provides a maximum signaling rate of 33.6 kbps, matching the advertised V.34 modem class. Its 24-TSSOP package supports compact, automated PCB assembly while exposing the device's external interface and control functions. The B revision is associated with a lead-free ordering configuration. Applications include embedded telephone systems, fax terminal controllers, data communications equipment, and legacy telephone-line products that require a dedicated modem engine.
Because this is a mixed-signal communications device, board design must account for analog line handling, digital control signals, power-supply quality, and exposed-pad or thermal requirements described by the package documentation. Input and output filtering, isolation boundaries, grounding, and external line-interface components are essential to prevent modulation energy from coupling into sensitive logic. Firmware and host-driver compatibility should also be verified before replacing another modem controller.
The SI2438-B-FTR is most appropriate when a new design deliberately targets V.34-class data and fax connectivity and can accommodate a legacy telephone-line interface. It is not a drop-in substitute for a broadband, Ethernet, wireless, or modern broadband voice terminal, even when those products serve similar end-user functions. Existing products should also be checked for regional analog-network approval and obsolete-part risk.
For a new layout, use the manufacturer's pin-description and layout guidance to assign all 24 pins and connect the required interface components. Review the clock, crystal or timing requirements, line-side connections, reset behavior, and supply decoupling against the device documentation. Preserve the defined exposed-pad connection if the package drawing calls for one, and validate signal integrity from the analog interface through the digital controller.
This product page organizes the confirmed identity, package, speed class, sourcing workflow, alternative-device evidence, and design considerations for the SI2438-B-FTR. It also identifies which engineering details require confirmation in the manufacturer documentation before schematic release or production qualification.
के लिए ड्रॉप-इन विकल्प SI2438-B-FTR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं SI2438-B-FTR (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Supported Functions.
SI2438-A-FT
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →SI2438-A-FTR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
SI2438-B-GTR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
SI2493-FT
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
SI2418-A-FTR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
SI2438-B-FTR विशेषताएं
| Device Type | System-side ISOmodem integrated circuit |
| Maximum Data Rate | 33.6 kbps |
| Modulation Class | V.34 |
| Supported Functions | Data, fax, and voice modem signaling |
| पैकेज | 24-TSSOP |
| पिन काउंट | 24 pins |
| माउंटिंग प्रकार | Surface mount |
| Lead-Free Configuration | Lead-free |
| Product Category | Network Controller and Processor ICs |
| Telephone Interface Type | System-side analog modem interface |
| AEC-Q100 Qualification | not_applicable |
| Packaging Format | Tape & Reel |
SI2438-B-FTR 24-tssop पिन कॉन्फ़िगरेशन गाइड
SI2438-B-FTR (24-tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SI2438-B-FTR.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
SI2438-B-FTR के लिए उपयुक्त है 6 अनुप्रयोगs: Legacy Fax Terminal Controller, Analog Data Communications Equipment, Telephone-Line Voice Messaging, Embedded Industrial Dialer, Point-to-Point Remote Terminal, Multi-Function Communication Controller.
Legacy Fax Terminal Controller
The SI2438-B-FTR is appropriate for a legacy fax terminal that must connect over an analog telephone line and operate in the V.34 modem class. Its 33.6 kbps signaling capability provides a defined function for compressed document-transfer control, while the 24-TSSOP package simplifies compact surface-mount construction. The modem engine is normally paired with host logic, memory, a telephone-network interface, and approved isolation or protection components. Because line signaling is sensitive, keep analog routing away from processor buses and follow the manufacturer's reference interface. Firmware support for the host processor and the target country's telephone-network requirements must also be confirmed before production release.
अनुशंसित
Analog Data Communications Equipment
The SI2438-B-FTR can serve as the modem engine in equipment designed for V.34-class data transmission over an analog telephone connection. Its confirmed 33.6 kbps maximum rate makes it relevant to legacy remote-access, point-to-point data, and embedded communication designs. The system must provide the required external line-interface network, signal conditioning, and host-control logic while respecting the device's documented supply and clocking requirements. Engineers should verify connection negotiation, error handling, and line-state behavior in the target application. PCB planning should isolate the analog telephone path and provide controlled return paths so switching activity from the host processor does not degrade modem performance.
अनुशंसित
Telephone-Line Voice Messaging
The SI2438-B-FTR can support a voice-oriented terminal that uses a system-side analog modem for signaling and connection control. Its device class combines data, fax, and voice functions, allowing a shared communications path when the host system also manages document or data-transfer workflows. The implementation requires an approved telephone interface, appropriate line protection, microphone and speaker signal paths where applicable, and host firmware that drives the modem registers. The 24-TSSOP package supports compact designs, but thermal and layout planning remain necessary. Confirm the supported voice modes and electrical timing directly from the controlled manufacturer documentation before selecting the part for a new voice product.
अनुशंसित
Embedded Industrial Dialer
A remote monitoring or industrial dialer can use the SI2438-B-FTR when connectivity is required through an analog telephone network rather than an IP or cellular network. The 33.6 kbps V.34 modem function offers a defined communication path for short commands, status reports, and configuration exchanges. The surrounding controller must handle modem initialization, dialing, retries, line-state monitoring, and data framing. Industrial use requires verification of operating-temperature limits, surge exposure, isolation strategy, and enclosure-related thermal conditions. The telephone interface should include the protection and filtering required by the applicable telecom environment. Use the Request a Quote form to request current qualification and compliance documentation for the production configuration.
अनुशंसित
Point-to-Point Remote Terminal
The SI2438-B-FTR is relevant to compact remote terminals that exchange data over an analog telephone connection at V.34-class speeds. A typical design pairs the modem IC with a host microcontroller, nonvolatile storage, a telephone line interface, and a human interface or local control port. Its 33.6 kbps rate is suitable for legacy supervisory data rather than file-intensive broadband traffic. Engineering validation should cover line-noise immunity, startup and shutdown behavior, connection-loss recovery, and timing under variable line conditions. Keep the modem clock and supply rails clean, and validate the complete analog path with the intended telephone network. The same host firmware should not be assumed to work with a revision candidate without driver review.
अनुशंसित
Multi-Function Communication Controller
The SI2438-B-FTR can serve as the communication engine in a multi-function terminal that combines data, fax, and voice sessions over one telephone interface. Its advertised V.34, 33.6 kbps modem capability provides a unified legacy connectivity solution without requiring separate modem blocks for each service. The controller architecture should separate modem control, host application logic, and telephone-network signaling to simplify fault recovery and firmware maintenance. Because the device is a mixed-signal communications IC, board-level filtering and grounding can influence performance as much as nominal modem speed. Validate timing, register behavior, and regional network compatibility using the manufacturer documentation and a representative line interface before releasing the design.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा SI2438-B-FTR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | SI2438-A-FT | SI2438-A-FTR | SI2438-B-GTR | SI2493-FT |
|---|---|---|---|---|---|
| Package | TSSOP-24 | TSSOP-24 | TSSOP-24 | TSSOP-24 | TSSOP-24 |
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Product Function | Data, fax, and voice ISOmodem | Data, fax, and voice ISOmodem | Data, fax, and voice ISOmodem | Data, fax, and voice ISOmodem | Communication controller and processor |
| Pin Count | 24 pins | 24 pins | 24 pins | 24 pins | 24 pins |
| Surface-Mount Assembly | Yes | Yes | Yes | Yes | Yes |
मुख्य विशेषताएँ
- Confirmed 33.6 kbps V.34-class operation (बनामSI2493-FT)
- Unified data, fax, and voice modem functionality (बनामSI2418-A-FTR)
- Lead-free 24-TSSOP production configuration (बनामSI2438-A-FT)
डिज़ाइन नोट्स
Assign the modem interface from the manufacturer's 24-pin description table rather than inferring functions from neighboring pins. Place required decoupling capacitors at their specified power pins, preserve the recommended ground connections, and keep the telephone-line analog network physically separate from processor clocks and high-speed digital traces. A clear partition between the analog line path and digital control section reduces susceptibility to crosstalk and common-impedance noise.
Validate the external line-interface network, clock source, reset timing, and modem-control signals with the intended analog network conditions. Use the manufacturer's reference values for component selection and impedance-controlled routing where specified. Pay particular attention to return paths and grounding around the telephone interface; modem performance can degrade when switching current from the host processor shares a noisy path with the analog section.
Do not treat a shared 24-TSSOP outline as proof of drop-in compatibility. Before substituting a revision candidate, compare pin names, power limits, clock configuration, reset behavior, timing, and host-register or firmware requirements. Confirm that the replacement is intended for the same system-side role. A successful electrical power-on is not sufficient evidence of interoperability, so include connection, data-transfer, fax, and line-recovery tests in the qualification plan.
Estimate dissipation from the selected supply voltage and the device's actual operating current, then compare the resulting junction temperature with its rated limit. Use the manufacturer thermal information for the exact TSSOP package and board implementation. Keep the modem clock and line interface inactive long enough to observe idle behavior, and test the assembled enclosure under maximum expected telephone-line activity rather than relying only on a laboratory supply condition.
अनुपालन जानकारी
The SI2438-B-FTR is identified as a lead-free configuration. RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation through current manufacturer documentation. Automotive qualification is not established.