SI3018-F-GS - 3.3V Global Line-Side DAA | Skyworks Solutions
MPN: SI3018-F-GS ✓ ActiveSI3018-F-GS Overview
A Direct Access Arrangement is an integrated analog interface that connects a modem or voice system to a subscriber line. Within the product hierarchy, a DAA sits below a telecom interface IC, below an integrated circuit, and ultimately below the broader semiconductor category. Its practical role is to condition the line-side signal, support hook and loop-state detection, and provide the physical interface between the digital modem circuitry and the analog telephone network.
The SI3018-F-GS is identified as a small 16-pin line-side device in the programmable voice DAA documentation. Manufacturer materials describe the Si3050 combination of one 16-pin small line-side device with system-side devices, allowing the modem platform to integrate more of the conventional voice interface than a simple discrete telephone-network adapter. This consolidation reduces the number of separate analog components normally required by a modem design.
The -F variant supports 3.3 V operation, while the -GS suffix identifies the global line-side version listed by Skyworks Solutions. Distributor listings consistently identify the SI3018-F-GS in a 16-SOIC package, with tube packaging shown for the -GS orderable configuration. The compact surface-mount package allows the line-side interface to be placed alongside the modem controller, DSP, memory, and power-management circuitry on a dense communications board.
Typical uses include foreign-exchange office modems, global line-card designs, voice-over-IP gateways with legacy line support, and other telecom endpoint equipment that connects a data or voice modem to an analog subscriber loop. In these systems, the SI3018-F-GS complements the modem's digital processing path with the analog line interface required to survive real-world telephone-network conditions.
Use the manufacturer pin-description table and typical application circuit when assigning PCB tracks, because exact signal names, operating limits, and external-network connections are defined in the device documentation. Confirm country-specific line-interface requirements and the companion system-side device before releasing a production design, since global regulatory behavior can differ from region-specific variants.
Drop-in alternatives for SI3018-F-GS — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with SI3018-F-GS (same form factor and footprint) — differing in Product Type.
SI3018-GS
✅ Drop-InContact for price
View Datasheet →SI3018-F-GS Specifications
| Product Type | Global line-side Direct Access Arrangement (DAA) |
| Supply Voltage | 3.3 V |
| Package | 16-pin SOIC |
| Line-Side Role | Global telephone-line analog interface |
| Compatible Modem Platform | Si24xx modem platform |
| Associated Chipset Family | Si3050 voice DAA chipset |
| Device Class | Telecom interface IC |
| Mounting Type | Surface mount |
| Orderable Packaging | Tube |
| RoHS Compliance | Compliant |
| Lead-Free Status | Lead free |
SI3018-F-GS 16-pin soic Pin Configuration Guide
Pin configuration for SI3018-F-GS (16-pin soic package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for SI3018-F-GS.
Refer to the datasheet for full pin configuration.
Typical Applications
SI3018-F-GS is suitable for 6 applications: Foreign-Exchange Office Modems, Global Voice and Data Line Cards, Voice-over-IP Gateways with Analog Line Support, Telecom Endpoint Equipment, Industrial Telephone and Voicemail Systems, Customer Premises Equipment Retrofits.
Foreign-Exchange Office Modems
The SI3018-F-GS fits the line side of an FXO modem because manufacturer documentation identifies it as a global DAA for Si24xx modem platforms. The 16-pin SOIC package keeps the analog line interface close to the modem DSP and reduces board area compared with a discrete implementation. Its 3.3 V operating supply also aligns with modern 3.3 V modem designs, although the external protection network and companion system-side device must follow the manufacturer reference circuit.
Recommended
Global Voice and Data Line Cards
A global line card can use the SI3018-F-GS as its subscriber-line analog interface when the modem is based on the Si24xx family. The device provides a defined function within the Si3050 voice DAA chipset rather than acting as a general-purpose transceiver. Because the part is identified as a small 16-pin line-side device, it supports compact multichannel designs where board area and component count are important.
Recommended
Voice-over-IP Gateways with Analog Line Support
The SI3018-F-GS is applicable to Voice-over-IP gateways that retain a foreign-exchange office connection for legacy analog lines. Its global line-side DAA role complements the digital voice-processing path in an Si24xx modem, avoiding the need to implement the entire analog subscriber interface with separate components. The 3.3 V supply and 16-SOIC footprint make the device suitable for compact gateway hardware, but deployment-country line requirements must be reviewed during certification.
Recommended
Telecom Endpoint Equipment
The SI3018-F-GS supports telecom endpoint equipment that connects digital modem circuitry to a real-world analog telephone loop. Manufacturer material describes the Si3050 family as combining a small 16-pin line-side device with a system-side device, consolidating functions normally distributed across isolation, relay, optocoupler, and interface circuitry. The SI3018-F-GS therefore provides a defined block within a complete voice DAA chipset rather than operating as a stand-alone codec.
Recommended
Industrial Telephone and Voicemail Systems
Industrial telephone and voicemail systems that terminate an analog subscriber line can use the SI3018-F-GS as the line-side DAA for an Si24xx-based modem section. Its 3.3 V operation reduces the need for a separate high-voltage supply domain in the modem area, while the surface-mount SOIC package simplifies automated assembly. Check surge protection, hook-state behavior, and the applicable line voltage limits in the manufacturer design guidance.
Recommended
Customer Premises Equipment Retrofits
The SI3018-F-GS can support an upgrade path for customer premises equipment that replaces a legacy modem interface with an Si24xx-based design. Because the part is presented as a global 16-pin line-side DAA, it allows the analog telephone interface to be consolidated onto a modern 3.3 V platform. Before replacing an installed design, verify the external protection components and confirm that the required global line behavior matches the existing equipment specification.
Recommended
Engineering reference data for SI3018-F-GS — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | SI3018-GS |
|---|---|---|
| Brand | Skyworks Solutions | Silicon Laboratories |
| Package | 16-SOIC | 16-SOIC |
| Product Function | Global line-side Direct Access Arrangement | Direct Access Arrangement |
| Number of Pins | 16 pins | 16 pins |
Key Differentiators
- Explicit 3.3 V global line-side configuration (vs SI3018-GS)
- Defined Si24xx modem-platform positioning (vs SI3018-GS)
- Small 16-pin line-side integration (vs SI3018-GS)
Design Notes
Route the subscriber-line interface as a short, isolated analog network and follow the manufacturer layout for protection components, coupling paths, and ground returns. The SI3018-F-GS uses a 16-SOIC package, so confirm every physical pin against the pin-description table before releasing artwork. Keep the modem data path physically separated from line-side routing to reduce coupled noise.
The SI3018-F-GS operates from 3.3 V, so provide a clean supply rail with local high-frequency bypass placed directly beside the device pins. Use the manufacturer recommended capacitor values and account for line-interface protection components when planning power-up behavior. Do not substitute the SI3018-GS until its supply requirements and enable sequence have been checked against the target schematic.
Do not infer full interchangeability from the shared 16-SOIC footprint alone. The target is the 3.3 V global line-side -F-GS configuration, while SI3018-GS uses a different ordering suffix. Compare regional line behavior, external component values, register defaults, and the companion system-side device. The SI3018-F-GSR is a packaging-code variant and was not treated as a distinct engineering alternative.
Compliance Information
RoHS-compliant and lead-free status are identified for the SI3018 family. REACH, halogen-free, and conflict-minerals declarations are not stated in the available documentation.