SI3018-F-GS - 3.3V Global Line-Side DAA | Skyworks Solutions
MPN: SI3018-F-GS ✓ সক্রিয়SI3018-F-GS সারাংশ
A Direct Access Arrangement is an integrated analog interface that connects a modem or voice system to a subscriber line. Within the product hierarchy, a DAA sits below a telecom interface IC, below an integrated circuit, and ultimately below the broader semiconductor category. Its practical role is to condition the line-side signal, support hook and loop-state detection, and provide the physical interface between the digital modem circuitry and the analog telephone network.
The SI3018-F-GS is identified as a small 16-pin line-side device in the programmable voice DAA documentation. Manufacturer materials describe the Si3050 combination of one 16-pin small line-side device with system-side devices, allowing the modem platform to integrate more of the conventional voice interface than a simple discrete telephone-network adapter. This consolidation reduces the number of separate analog components normally required by a modem design.
The -F variant supports 3.3 V operation, while the -GS suffix identifies the global line-side version listed by Skyworks Solutions. Distributor listings consistently identify the SI3018-F-GS in a 16-SOIC package, with tube packaging shown for the -GS orderable configuration. The compact surface-mount package allows the line-side interface to be placed alongside the modem controller, DSP, memory, and power-management circuitry on a dense communications board.
Typical uses include foreign-exchange office modems, global line-card designs, voice-over-IP gateways with legacy line support, and other telecom endpoint equipment that connects a data or voice modem to an analog subscriber loop. In these systems, the SI3018-F-GS complements the modem's digital processing path with the analog line interface required to survive real-world telephone-network conditions.
Use the manufacturer pin-description table and typical application circuit when assigning PCB tracks, because exact signal names, operating limits, and external-network connections are defined in the device documentation. Confirm country-specific line-interface requirements and the companion system-side device before releasing a production design, since global regulatory behavior can differ from region-specific variants.
এর জন্য ড্রপ-ইন বিকল্প SI3018-F-GS — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible SI3018-F-GS (একই form factor এবং footprint) — পার্থক্য রয়েছে Product Type.
SI3018-GS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →SI3018-F-GS বিশেষণ
| Product Type | Global line-side Direct Access Arrangement (DAA) |
| সাপ্লাই ভোল্টেজ | 3.3 V |
| প্যাকেজ | 16-pin SOIC |
| Line-Side Role | Global telephone-line analog interface |
| Compatible Modem Platform | Si24xx modem platform |
| Associated Chipset Family | Si3050 voice DAA chipset |
| Device Class | Telecom interface IC |
| মাউন্টিং টাইপ | Surface mount |
| Orderable Packaging | Tube |
| RoHS Compliance | Compliant |
| Lead-Free Status | Lead free |
SI3018-F-GS 16-pin soic পিন কনফিগারেশন গাইড
SI3018-F-GS (16-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি SI3018-F-GS.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
SI3018-F-GS এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Foreign-Exchange Office Modems, Global Voice and Data Line Cards, Voice-over-IP Gateways with Analog Line Support, Telecom Endpoint Equipment, Industrial Telephone and Voicemail Systems, Customer Premises Equipment Retrofits.
Foreign-Exchange Office Modems
The SI3018-F-GS fits the line side of an FXO modem because manufacturer documentation identifies it as a global DAA for Si24xx modem platforms. The 16-pin SOIC package keeps the analog line interface close to the modem DSP and reduces board area compared with a discrete implementation. Its 3.3 V operating supply also aligns with modern 3.3 V modem designs, although the external protection network and companion system-side device must follow the manufacturer reference circuit.
সুপারিশকৃত
Global Voice and Data Line Cards
A global line card can use the SI3018-F-GS as its subscriber-line analog interface when the modem is based on the Si24xx family. The device provides a defined function within the Si3050 voice DAA chipset rather than acting as a general-purpose transceiver. Because the part is identified as a small 16-pin line-side device, it supports compact multichannel designs where board area and component count are important.
সুপারিশকৃত
Voice-over-IP Gateways with Analog Line Support
The SI3018-F-GS is applicable to Voice-over-IP gateways that retain a foreign-exchange office connection for legacy analog lines. Its global line-side DAA role complements the digital voice-processing path in an Si24xx modem, avoiding the need to implement the entire analog subscriber interface with separate components. The 3.3 V supply and 16-SOIC footprint make the device suitable for compact gateway hardware, but deployment-country line requirements must be reviewed during certification.
সুপারিশকৃত
Telecom Endpoint Equipment
The SI3018-F-GS supports telecom endpoint equipment that connects digital modem circuitry to a real-world analog telephone loop. Manufacturer material describes the Si3050 family as combining a small 16-pin line-side device with a system-side device, consolidating functions normally distributed across isolation, relay, optocoupler, and interface circuitry. The SI3018-F-GS therefore provides a defined block within a complete voice DAA chipset rather than operating as a stand-alone codec.
সুপারিশকৃত
Industrial Telephone and Voicemail Systems
Industrial telephone and voicemail systems that terminate an analog subscriber line can use the SI3018-F-GS as the line-side DAA for an Si24xx-based modem section. Its 3.3 V operation reduces the need for a separate high-voltage supply domain in the modem area, while the surface-mount SOIC package simplifies automated assembly. Check surge protection, hook-state behavior, and the applicable line voltage limits in the manufacturer design guidance.
সুপারিশকৃত
Customer Premises Equipment Retrofits
The SI3018-F-GS can support an upgrade path for customer premises equipment that replaces a legacy modem interface with an Si24xx-based design. Because the part is presented as a global 16-pin line-side DAA, it allows the analog telephone interface to be consolidated onto a modern 3.3 V platform. Before replacing an installed design, verify the external protection components and confirm that the required global line behavior matches the existing equipment specification.
সুপারিশকৃত
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SI3018-F-GS — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | SI3018-GS |
|---|---|---|
| Brand | Skyworks Solutions | Silicon Laboratories |
| Package | 16-SOIC | 16-SOIC |
| Product Function | Global line-side Direct Access Arrangement | Direct Access Arrangement |
| Number of Pins | 16 pins | 16 pins |
মূল পার্থক্যসমূহ
- Explicit 3.3 V global line-side configuration (বনামSI3018-GS)
- Defined Si24xx modem-platform positioning (বনামSI3018-GS)
- Small 16-pin line-side integration (বনামSI3018-GS)
ডিজাইন নোট
Route the subscriber-line interface as a short, isolated analog network and follow the manufacturer layout for protection components, coupling paths, and ground returns. The SI3018-F-GS uses a 16-SOIC package, so confirm every physical pin against the pin-description table before releasing artwork. Keep the modem data path physically separated from line-side routing to reduce coupled noise.
The SI3018-F-GS operates from 3.3 V, so provide a clean supply rail with local high-frequency bypass placed directly beside the device pins. Use the manufacturer recommended capacitor values and account for line-interface protection components when planning power-up behavior. Do not substitute the SI3018-GS until its supply requirements and enable sequence have been checked against the target schematic.
Do not infer full interchangeability from the shared 16-SOIC footprint alone. The target is the 3.3 V global line-side -F-GS configuration, while SI3018-GS uses a different ordering suffix. Compare regional line behavior, external component values, register defaults, and the companion system-side device. The SI3018-F-GSR is a packaging-code variant and was not treated as a distinct engineering alternative.
কমপ্লায়েন্স তথ্য
RoHS-compliant and lead-free status are identified for the SI3018 family. REACH, halogen-free, and conflict-minerals declarations are not stated in the available documentation.