Skyworks Solutions

SI3056-D-FS - 3V Integrated Telephone DAA | Skyworks

MPN: SI3056-D-FS ✓ Active
3 V Vdss 15 mA Id 16-SOIC Package
MOQ: 1 |

SI3056-D-FS Overview

The Skyworks Solutions SI3056-D-FS is an integrated Direct Access Arrangement (DAA) designed for programmable telephone-line interfaces. It operates from a 3 V minimum supply, consumes 15 mA typical supply current, and is packaged in a 16-SOIC. The device is associated with the Si3056 family of Global Serial Interface Direct Access Arrangements for global telephone-line interface requirements.

A Direct Access Arrangement is a telecom interface IC that connects a communications system to the physical telephone line. It belongs to the interface IC hierarchy and replaces discrete analog front-end, isolation-transformer, and related line-interface functions. The SI3056-D-FS provides a programmable line interface with integrated isolation technology, reducing the external circuitry needed for a compliant line-side connection.

Key features identified for the SI3056 family include AC termination, DC termination, ring-detect threshold, ringer impedance, and an 80 dB dynamic range across the transmit and receive paths. Its low 3 V supply requirement suits compact, low-voltage telephony designs, while 15 mA typical consumption helps constrain system power demand. The integrated approach can also reduce board area compared with a discrete implementation.

The SI3056 combines programmable line-interface functions, isolation technology, and transmit/receive signal handling in one 16-SOIC device. Its architecture is intended to provide a configurable line interface for global telephone equipment, including voice-over-IP terminals, analog telephone adapters, voice gateways, and other line-connected communications products. Exact electrical limits and timing values should be selected from the manufacturer datasheet.

Typical applications include legacy telephone-network interfaces, Voice over IP endpoint equipment, customer premises equipment, voice gateways, and embedded telephone-line adapters. The 80 dB dynamic range is relevant when preserving voice-band signal amplitude across the transmit and receive paths, while programmable termination and ring-detection functions allow the same device family to address different line conditions.

Designers should use the manufacturer pin-description table when assigning the 16-SOIC land pattern and should review the application circuit for recommended external components. Power routing should minimize noise on the telephone-line interface, and isolation-related creepage and clearance requirements should be evaluated against the final PCB construction and system voltage.

This product page combines the SI3056-D-FS device identity, electrical highlights, package information, application guidance, drop-in options, and design notes. It supports faster component evaluation while directing detailed implementation decisions to the manufacturer datasheet and its prescribed reference circuit.

Drop-in alternatives for SI3056-D-FS — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with SI3056-D-FS (same form factor and footprint) — differing in Isolation Technology, Package, Product Type.

Skyworks Solutions
Isolation Technology: Patented Skyworks Solutions isolation technology
Package: 16-pin SOIC
Product Type: Integrated direct access arrangement (DAA)
Compare with SI3056-D-FS →

SI3056-D-FSR

✅ Drop-In
📦 16-SOIC
Identical 16-SOIC DAA device and documented system-side SSI interface; ordering code differs only in reel-oriented packaging presentation, with 0% change to the identified 3 V minimum supply and 15 mA typical current.

📋 Reference alternative (not in catalog)

SI3056-FS

✅ Drop-In
Skyworks Solutions
📦 16-SOIC
Integrated direct access arrangement (DAA) · Programmable telephone-line interface · Patented Skyworks Solutions isolation technology · 16-pin SOIC · Surface mount · Telecom interface IC · 56 Kbps · 2-wire to 4-wire hybrid integration

Contact for price

View Datasheet →

SI3056-D-FS Specifications

Product Type Direct Access Arrangement (DAA)
Minimum Supply Voltage 3 V
Typical Supply Current 15 mA
Dynamic Range 80 dB
Interface Global Serial Interface (GSI)
Package 16-SOIC
Mounting Type Surface Mount
AC Termination Integrated
DC Termination Integrated
Ring Detection Programmable ring-detect threshold
Ringer Impedance Programmable ringer impedance
Isolation Technology Integrated Skyworks isolation technology
Transmit and Receive Paths Integrated TX/RX paths

SI3056-D-FS 16-soic Pin Configuration Guide

Pin configuration for SI3056-D-FS (16-soic package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

16-soic package pinout diagram for SI3056-D-FS

No detailed pinout data available for SI3056-D-FS.

Refer to the datasheet for full pin configuration.

Typical Applications

SI3056-D-FS is suitable for 6 applications: Voice over IP Telephone Adapters, Analog Voice Terminals, Customer Premises Equipment, Voice Gateways, Embedded Telephone-Line Adapters, Legacy Network Interface Modules.

📱

Voice over IP Telephone Adapters

The SI3056-D-FS fits Voice over IP adapters that must connect digital voice equipment to a physical telephone line. Its integrated Direct Access Arrangement combines AC termination, DC termination, ring detection, ringer impedance, and transmit and receive paths in a 16-SOIC package. Operating from a 3 V minimum supply and drawing 15 mA typical current supports compact, power-conscious endpoint designs. The 80 dB dynamic range across the TX/RX paths is useful for preserving voice-band signal amplitude. Designers should implement the isolation and external-network components shown in the manufacturer application circuit, since the integrated device does not eliminate all line-interface requirements.

📞

Analog Voice Terminals

The SI3056-D-FS is appropriate for analog voice terminals requiring a configurable telephone-line connection. Programmable AC and DC termination, ring-detect threshold, and ringer impedance allow the same DAA architecture to support different line-network conditions. Its 16-SOIC package limits board area compared with a larger discrete line-interface implementation, while the 3 V minimum supply and 15 mA typical current are suitable for low-voltage terminal platforms. The 80 dB dynamic range helps maintain signal integrity through the integrated transmit and receive paths. Final implementations must follow the manufacturer isolation and external-component recommendations.

🏠

Customer Premises Equipment

The SI3056-D-FS can support legacy telephone connectivity within customer premises equipment such as gateways and access terminals. Its integrated DAA replaces a collection of analog front-end and isolation-related discrete functions, simplifying the line-interface layout. The 3 V minimum operating supply supports compact CPE power architectures, and the 15 mA typical current helps designers establish a realistic supply budget. Programmable line termination and ring detection are particularly useful when equipment must operate across different telephone-line configurations. Engineers should still verify regulatory isolation, surge protection, PCB creepage, and external impedance requirements for the deployed region.

🌐

Voice Gateways

The SI3056-D-FS suits voice gateways that bridge packet-based calling systems with legacy telephone lines. The integrated DAA provides a programmable physical line interface, including AC termination, DC termination, ring detection, and ringer-impedance control, while the transmit and receive paths support voice-band signal handling with 80 dB dynamic range. Its 16-SOIC package is useful where gateway hardware must combine analog line connectivity with dense digital processing. The 3 V minimum supply and 15 mA typical consumption support power budgeting in embedded systems. Keep the telephone interface isolated from user-facing circuits and follow the manufacturer layout guidance for high-voltage separation.

🏭

Embedded Telephone-Line Adapters

The SI3056-D-FS fits embedded adapters used to add telephone-line connectivity to industrial or communications equipment. Integrating the analog front end, isolation-transformer-related functions, transmit path, and receive path reduces the number of discrete line-interface components and simplifies assembly. The 16-SOIC package provides a compact footprint, and the 3 V minimum supply permits integration with low-voltage system rails. The programmable termination and ring-detection functions allow a standard platform to address multiple line conditions, while the 80 dB dynamic range supports voice transmission. Qualification should include line-network, isolation, temperature, and protection testing appropriate to the deployed equipment.

🖥️

Legacy Network Interface Modules

The SI3056-D-FS can be used in legacy network interface modules where an embedded system requires direct access to a telephone line. Its system-side SSI interface and programmable DAA functions provide a controlled connection between the host processor and the physical line. A 3 V minimum supply and 15 mA typical current make the device suitable for compact embedded power systems, while the 80 dB dynamic range covers the integrated TX/RX paths. The same 16-SOIC device also supports ring sensing and programmable termination, reducing external circuitry. Designers should confirm SSI timing and pin-level behavior in the manufacturer datasheet before laying out the host interface.

What is the SI3056-D-FS?
The SI3056-D-FS is a Skyworks Solutions integrated Direct Access Arrangement (DAA) for programmable telephone-line interfaces. According to the manufacturer datasheet, the Si3056 implements patented isolation technology and combines functions otherwise handled by a discrete analog front end, isolation transformer, and related circuitry. The SI3056-D-FS is supplied in a 16-SOIC package and is intended for global telephone-line interface equipment.
What is the operating voltage of SI3056-D-FS?
The SI3056-D-FS operates from a 3 V minimum supply voltage. The manufacturer datasheet identifies the Si3056 as a low-voltage integrated DAA intended for programmable line-interface designs. Designers should use the datasheet's absolute maximum and recommended operating conditions when defining the power rail, particularly for protection, decoupling, and startup requirements.
How much current does SI3056-D-FS consume?
The SI3056-D-FS has a typical supply current of 15 mA. According to the manufacturer datasheet, this operating point is specified for the integrated Direct Access Arrangement in its system-side configuration. The figure should be used for preliminary power budgeting, while final thermal and supply-design work should account for the exact voltage, line condition, and operating mode specified in the datasheet.
Where can I download the SI3056-D-FS datasheet PDF?
The official SI3056-D-FS datasheet PDF is available from Skyworks at https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/si3056.pdf. It covers the Si3056, Si3018, Si3019, and Si30110 family information, including line-interface functions, isolation technology, electrical characteristics, and application guidance. Use the pin-description and application-circuit sections when designing the 16-SOIC layout.
Where is the SI3056-D-FS pinout?
The SI3056-D-FS pinout is defined in the pin-description table of the official Skyworks Si3056 datasheet. The device uses a 16-SOIC package, and pin assignments should be transcribed directly from that table rather than inferred from a generic package drawing. The same table should be checked for the exact -D-FS ordering code and system-side SSI configuration.
What line-interface functions are integrated in SI3056-D-FS?
The SI3056-D-FS integrates AC termination, DC termination, a programmable ring-detect threshold, programmable ringer impedance, and the transmit and receive paths. According to the manufacturer datasheet, this integration replaces a discrete analog front end and isolation-transformer arrangement. The result is a compact programmable interface for global telephone-line equipment.
What dynamic range does SI3056-D-FS provide?
The SI3056-D-FS provides an 80 dB dynamic range across the transmit and receive paths. According to the manufacturer datasheet, that specification describes the signal-handling range of the integrated line interface. It is particularly relevant to voice-band designs where amplitude fidelity must be retained while line conditions vary.
Is SI3056-D-FS suitable for Voice over IP equipment?
The SI3056-D-FS is suitable for Voice over IP equipment that requires a physical telephone-line interface. Its 3 V minimum supply, integrated isolation technology, programmable termination, ring detection, and 80 dB TX/RX dynamic range support compact voice terminals and gateways. The final design must still meet applicable telephone-network, safety, and isolation requirements.
When should I choose SI3056-D-FS over SI3056-FS?
Choose SI3056-D-FS when the design specifically requires the -D-FS ordering configuration and its documented system-side SSI interface. The SI3056-FS shares the Si3056 family and 16-SOIC format, but ordering-code behavior must be confirmed from the manufacturer datasheet before substitution. If the existing board does not require a -D-FS-specific function, the functional difference may not justify a change.
What is the difference between SI3056-D-FS and SI3056-D-FSR?
SI3056-D-FS and SI3056-D-FSR are both listed as 16-SOIC Direct Access Arrangement devices in the Skyworks Si3056 family. The -R ordering code indicates a reel-oriented packaging variant rather than a different circuit function, so it can preserve the same electrical and pin compatibility. The distinction should be handled through the manufacturer ordering table and assembly requirements.
What can replace SI3056-D-FS on an existing PCB?
The confirmed drop-in candidates are SI3056-D-FSR and SI3056-FS, both listed as 16-SOIC Direct Access Arrangement devices. SI3056-D-FSR changes the ordering packaging presentation, while SI3056-FS is another family ordering code that requires configuration verification. No cross-manufacturer pin-compatible replacement was identified, so do not substitute a generic telecom interface solely because its functions appear similar.
Where can I request a quote for SI3056-D-FS?
Use the Request a Quote form on this page to request SI3056-D-FS pricing, stock confirmation, lead time, and minimum-order details. A current distributor listing indicates that the SI3056-D-FS is being offered, but transaction timing can vary by quantity and order configuration. The form provides the appropriate channel for a current order quotation without relying on stale static pricing.
What is the lead time for SI3056-D-FS?
Current lead time for SI3056-D-FS should be confirmed through the Request a Quote form on this page. The part is listed by authorized distribution channels, but no fixed production or delivery interval is stated in the device documentation. For production planning, request the quantity-specific schedule together with package, assembly, and traceability requirements.
Is SI3056-D-FS in stock?
SI3056-D-FS is currently offered through distributor listings, but quantity-specific availability can change rapidly. Use the Request a Quote form on this page for a current stock confirmation and lead-time quotation. For production scheduling, request an allocation that covers your build quantity and approved manufacturer packaging configuration.
What are the key specifications of SI3056-D-FS?
The principal SI3056-D-FS specifications are a 3 V minimum supply voltage, 15 mA typical supply current, 80 dB dynamic range, and a 16-SOIC package. According to the manufacturer datasheet, the device also integrates AC and DC termination, programmable ring detection and ringer impedance, transmit and receive paths, and isolation technology for a global telephone-line interface.
Is there a Microchip equivalent for SI3056-D-FS?
No confirmed Microchip pin-compatible equivalent for SI3056-D-FS was identified in the available cross-reference information. The documented alternatives remain within the Skyworks Si3056 family, and a Microchip device may have a different interface, isolation architecture, pin assignment, or package. For a true drop-in decision, request a manufacturer-confirmed cross-reference and compare every power, interface, and isolation pin.

Engineering reference data for SI3056-D-FS — comparison, design guidance, and compliance information.

Selection Guide

Choose SI3056-D-FS when the design specifically calls for the documented -D-FS system-side SSI DAA configuration and a 16-SOIC footprint. Choose SI3056-D-FSR when the electrical configuration is unchanged but reel-oriented ordering or assembly handling is preferred; it has the same identified supply-voltage, current, and dynamic-range ratings. Choose SI3056-FS only after confirming that its suffix-specific configuration does not alter the required interface, termination, ring-detection, or isolation behavior. No cross-manufacturer drop-in alternative was confirmed. For a new design, use the manufacturer reference circuit to select every external line-network, protection, and isolation component; the integrated DAA reduces complexity but does not replace application-specific safety and regulatory validation.

Comparison with Alternatives

Parameter This Product SI3056-D-FSR SI3056-FS
Package 16-SOIC 16-SOIC 16-SOIC
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions
Product Type Direct Access Arrangement (DAA) Direct Access Arrangement (DAA) Direct Access Arrangement (DAA)
Ordering Difference SI3056-D-FS system-side DAA ordering code Reel-oriented ordering code SI3056-FS ordering code

Key Differentiators

  • Maintains the same documented system-side DAA configuration (vs SI3056-D-FSR)
  • Uses the same physical SOIC footprint (vs SI3056-FS)
  • Integrates multiple telephone-line functions (vs SI3056-D-FSR)

Design Notes

Follow the manufacturer application circuit and pin-description table when placing the 16-SOIC device. Keep the telephone-line interface and isolation barrier layout separated from low-voltage host circuitry, and preserve the recommended clearance and creepage boundaries. Decoupling components should connect directly to the relevant supply and ground pins with short traces so switching and line-transient energy does not enter sensitive host circuits.

Budget the power path using the 15 mA typical supply current and a 3 V minimum operating supply before adding margin for startup, transient, and line-dependent behavior. Use a local regulator or supply node that remains within the manufacturer limits. Verify that adjacent converters and switching nodes are arranged so their radiated or conducted noise does not degrade the 80 dB TX/RX dynamic range of the DAA.

Do not assume that any 16-SOIC Direct Access Arrangement is electrically interchangeable. Compare the exact ordering code, SSI interface behavior, ring-detection threshold, ringer impedance, termination configuration, and isolation implementation. When moving from SI3056-D-FS to SI3056-D-FSR, confirm reel orientation and assembly requirements; when considering SI3056-FS, verify the suffix-specific configuration before releasing production artwork.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The SI3056-D-FS is a telecommunications interface IC, so AEC-Q100 automotive qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the device documentation excerpt.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

SI3056-D-FS datasheet SI3056-D-FS datasheet pdf SI3056-D-FS pinout SI3056-D-FS specifications Skyworks SI3056-D-FS SI3056-D-FS 16-SOIC SI3056-D-FS equivalent SI3056-D-FS replacement SI3056-D-FS vs SI3056-FS SI3056-D-FS application circuit SI3056-D-FS price SI3056-D-FS stock

Related Components & Terms

Skyworks Solutions SI3056-D-FS SI3056-D-FSR SI3056-FS Direct Access Arrangement DAA telecom interface IC interface IC semiconductor Global Serial Interface GSI system-side SSI interface integrated isolation technology AC termination DC termination ring-detect threshold ringer impedance transmit path receive path 80 dB dynamic range 16-SOIC SOIC family surface mount SMD Voice over IP telephone-line interface 3 V minimum supply 15 mA typical current
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details