MaxLinear

SP3232EBCN-L - 250kbps RS-232 Transceiver | MaxLinear

MPN: SP3232EBCN-L ✓ Active
+3.0 V to +5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

SP3232EBCN-L Overview

MaxLinear, Inc. SP3232EBCN-L is a two-channel RS-232 transceiver with two drivers and two receivers, a 250 kbps data rate, and a 16-pin SOIC package. It operates from a true +3.0 V to +5.5 V supply and supports commercial-temperature operation from 0 °C to +70 °C. The integrated interface also provides 15 kV ESD protection, making it suitable for equipment that requires robust protection on exposed serial ports.

An RS-232 transceiver is an interface IC that converts logic-level signals to and from differential voltage levels used by RS-232 ports. A complete dual transceiver combines transmitter and receiver functions on each channel. The transmitter raises a digital signal to RS-232 voltage levels, while the receiver converts those voltage levels back into logic-compatible signals. This bidirectional level conversion allows a host, controller, or embedded system to connect to a conventional serial port using one compact integrated circuit.

The SP3232EBCN-L uses a high-efficiency charge-pump power supply that permits true RS-232 operation from a single supply. According to the manufacturer documentation, only 0.1 µF charge-pump capacitors are required in 3.3 V operation. This integration reduces the external component count compared with discrete RS-232 interface approaches and is valuable in portable and hand-held equipment where board area and power consumption are constrained.

With two transmit channels and two receive channels, the device supports simultaneous RS-232 activity on two logical channels. Its listed maximum signaling rate of 250 kbps provides ample margin for common serial links, including point-of-sale terminals, data-acquisition equipment, industrial controls, and service interfaces. The 16-SOIC package also supports conventional surface-mount assembly and is easier to inspect and rework than fine-pitch leadless packages.

Typical applications include configuration and service ports in portable instruments, RS-232 links in industrial control equipment, data-logger connections, POS-system peripherals, and legacy communications ports in embedded systems. The 3.0 V to 5.5 V supply range permits use in both 3.3 V and 5 V system architectures, while the 0 °C to +70 °C commercial-temperature range suits indoor commercial and industrial equipment.

When laying out the circuit, place the charge-pump capacitors and interface bypass capacitors close to their associated supply and charge-pump pins. Keep the RS-232 driver outputs away from sensitive analog or high-speed digital traces, and connect the device ground to the circuit ground at a low-impedance point. A protection network should be added when the connector is exposed to cables longer than the controlled enclosure boundary.

This product page combines the manufacturer specifications, verified RS-232 interface characteristics, cross-reference data, package guidance, and practical design considerations. It is intended to help engineers confirm supply compatibility, channel count, signaling rate, temperature range, ESD protection, and replacement suitability before placing the SP3232EBCN-L into a new or existing design.

Drop-in alternatives for SP3232EBCN-L — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with SP3232EBCN-L (same form factor and footprint) — differing in Package, Product Type, Maximum Data Rate, ESD Protection, Number of Drivers.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Number of Drivers: 2
Compare with SP3232EBCN-L →
Texas Instruments
Product Type: Multichannel RS-232 line driver/receiver
Maximum Data Rate: 250 kbit/s
ESD Protection: ±15 kV
Compare with SP3232EBCN-L →
Texas Instruments
Product Type: Dual RS-232 line driver and receiver
ESD Protection: ±15 kV IEC ESD protection
Compare with SP3232EBCN-L →
MaxLinear
Package: 20-TSSOP (Y), 4.40 mm body width
Number of Drivers: 2
MaxLinear
Package: 16-pin narrow SOIC
Product Type: RS-232 transceiver
Maximum Data Rate: 120 kbps
Compare with SP3232EBCN-L →

SP3222EBEY-L/TR

✅ Drop-In ⚠️ Specs Unverified
MaxLinear
📦 16-pin SOIC
RS-232 Transceiver (2 drivers / 2 receivers) · RS-232 (EIA/TIA-232-F compliant) · 3.0 V to 5.5 V · 250 kbps (under load) · 2 · 2 · 1 µA (receivers active, SP3222EB)

Contact for price

View Datasheet →

MAX232ACWE

✅ Drop-In
📦 16-pin SOIC
The MaxLinear cross-reference identifies the MAX232ACWE as functional-equivalent and pin-compatible; its exact data rate and ESD rating must be compared with the SP3232EBCN-L's 250 kbps rate and 15 kV protection.

📋 Reference alternative (not in catalog)

MAX3232ECD

✅ Drop-In
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

Contact for price

View Datasheet →

SP3232EBCN-L Specifications

Product Type 2/2 RS-232 transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Maximum Data Rate 250 kbps
Supply Voltage Range +3.0 V to +5.5 V
Operating Temperature Range 0 °C to +70 °C
ESD Protection 15 kV
Charge-Pump Capacitor Requirement 0.1 µF in 3.3 V operation
Interface Standard RS-232
Transceiver Configuration 2 transmit and 2 receive channels
Package 16-pin SOIC
Package Pin Count 16 pins
Mounting Type Surface mount

SP3232EBCN-L 16 pins Pin Configuration Guide

Pin configuration for SP3232EBCN-L (16 pins package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

16 pins package pinout diagram for SP3232EBCN-L

No detailed pinout data available for SP3232EBCN-L.

Refer to the datasheet for full pin configuration.

Typical Applications

SP3232EBCN-L is suitable for 6 applications: Portable Instrument Service Port, Industrial Controller RS-232 Interface, Data Logger Serial Connection, Point-of-Sale Peripheral Link, Legacy Computer Serial Adapter, Security Camera Installation Interface.

📱

Portable Instrument Service Port

The SP3232EBCN-L fits a portable instrument that exposes an RS-232 configuration or service port while operating from a 3.3 V system rail. Its +3.0 V to +5.5 V supply range and 0.1 µF charge-pump capacitor requirement support a compact implementation. The two transmitters and two receivers allow two logical serial channels without using separate interface ICs. The specified 250 kbps rate is comfortably above common service-port traffic, while 15 kV ESD protection strengthens a connector-facing circuit.

🏭

Industrial Controller RS-232 Interface

The SP3232EBCN-L is appropriate for an industrial controller that must communicate with RS-232 equipment over a wired configuration or diagnostic port. Two transmit and two receive channels support multiple device relationships while conserving board area. Its 0 °C to +70 °C operating range suits controlled indoor equipment, and its 250 kbps maximum rate accommodates ordinary command and status traffic. The 3.0 V to 5.5 V supply range also permits deployment in both 3.3 V and 5 V controller platforms.

🖥️

Data Logger Serial Connection

The SP3232EBCN-L can connect a data logger to a legacy RS-232 host using one dual transceiver. Its 250 kbps data rate supports the throughput expected from sampled data, command traffic, and status reporting, while two receivers permit monitoring of more than one incoming signal. Operation from a single +3.0 V to +5.5 V supply simplifies portable logger designs, and the 15 kV ESD rating provides useful protection where the serial cable is user accessible.

🖥️

Point-of-Sale Peripheral Link

The SP3232EBCN-L is suitable for a point-of-sale peripheral that uses an RS-232 receipt printer, customer display, scanner, or service interface. The two transmit and two receive channels can support paired communication paths while keeping the design compact. A 250 kbps maximum rate is sufficient for transaction messaging and peripheral control, and the device accepts 3.3 V or 5 V system rails. Its 15 kV ESD protection is valuable when peripheral cables are repeatedly connected by operators.

🔧

Legacy Computer Serial Adapter

The SP3232EBCN-L provides a practical interface bridge between a modern embedded controller and a legacy RS-232 port. Two drivers and two receivers support bidirectional equipment communication while maintaining a conventional 16-SOIC footprint. The +3.0 V to +5.5 V operating range lets the adapter operate beside modern 3.3 V logic, and the 250 kbps rate covers standard peripheral command traffic. Use an appropriate level shifter when the connected logic domain is not 3.3 V or 5 V.

🎥

Security Camera Installation Interface

The SP3232EBCN-L can support an RS-232 control channel in a security camera or installation tool used to adjust addresses, communications settings, or actuator functions. The 250 kbps rate is more than adequate for short control commands and status exchanges. Two transmit and two receive channels allow a compact multi-command interface, while the 0 °C to +70 °C range is appropriate for indoor cameras and commissioning equipment. The 15 kV ESD rating adds protection for accessible installation cables.

Recommended Products Summary

SP3232EBCN-L/TR MaxLinear Used in: Portable Instrument Service Port, Industrial Controller RS-232 Interface, Point-of-Sale Peripheral Link, Security Camera Installation Interface MAX232ACWE Pin-compatible RS-232 interface alternative Used in: Portable Instrument Service Port, Industrial Controller RS-232 Interface, Data Logger Serial Connection, Point-of-Sale Peripheral Link, Legacy Computer Serial Adapter, Security Camera Installation Interface MAX3232ECD Texas Instruments Used in: Data Logger Serial Connection, Legacy Computer Serial Adapter
What is the SP3232EBCN-L?
The SP3232EBCN-L is a dual RS-232 transceiver from MaxLinear, Inc. with two transmitters, two receivers, a 250 kbps maximum data rate, and a 16-pin SOIC package. It operates from +3.0 V to +5.5 V and is intended for portable, industrial, control, and data-acquisition equipment. According to the manufacturer product page, its charge-pump supply supports true RS-232 operation from a single supply.
What is the operating voltage of SP3232EBCN-L?
The SP3232EBCN-L operates from +3.0 V to +5.5 V. This range allows the same RS-232 interface design to operate from either a 3.3 V or 5 V system rail. According to the manufacturer documentation, its high-efficiency charge-pump circuit requires only 0.1 µF capacitors during 3.3 V operation, helping reduce the external component count.
What is the maximum data rate of SP3232EBCN-L?
The SP3232EBCN-L supports a maximum RS-232 signaling rate of 250 kbps. This provides sufficient bandwidth for conventional serial communication links used with data loggers, test equipment, industrial controllers, and service interfaces. The manufacturer identifies the device as a 2/2 transceiver with two transmit channels and two receive channels.
Where can I download the SP3232EBCN-L datasheet?
The manufacturer datasheet and technical information are available from the official MaxLinear SP3232EB product page at https://www.maxlinear.com/product/interface/serial-transceivers/rs-232/sp3232eb?quality=1. The document describes the SP3222EB and SP3232EB families, including the +3.0 V to +5.5 V supply range, charge-pump implementation, 250 kbps capability, and 15 kV ESD protection.
Where can I find the SP3232EBCN-L pinout?
Use the pin-description and typical-application diagrams in the manufacturer SP3232EB datasheet to confirm every connection before PCB release. The verified product information identifies a 16-pin SOIC package but does not reproduce the numbered pin descriptions, so this page does not present an inferred pin list. The manufacturer documentation is the authoritative source for driver, receiver, supply, ground, and charge-pump pin assignments.
What is the operating temperature range of SP3232EBCN-L?
The SP3232EBCN-L is specified for a commercial operating-temperature range of 0 °C to +70 °C. It is therefore suitable for indoor commercial equipment and controlled industrial environments that remain within this range. For extended-temperature or automotive installations, select a device specifically qualified for the required ambient conditions and verify its full electrical specifications.
How much ESD protection does SP3232EBCN-L provide?
The SP3232EBCN-L provides 15 kV ESD protection for its RS-232 interface. According to the manufacturer cross-reference information, this protection rating is a defining characteristic of the SP3232EB family. It improves robustness on connector-facing circuits, although proper layout, grounding, and any required external surge-protection network remain essential.
Is SP3232EBCN-L suitable for a 3.3 V embedded system?
Yes, the SP3232EBCN-L is suitable for a 3.3 V embedded system because its specified supply range is +3.0 V to +5.5 V. The manufacturer documentation states that the charge-pump supply needs only 0.1 µF capacitors in 3.3 V operation. Confirm the host logic levels, transceiver direction configuration, bypass-capacitor values, and RS-232 connector requirements in the typical application circuit.
What can replace the SP3232EBCN-L?
The MAX232ACWE is a documented pin-compatible functional equivalent for the SP3232EBCN-L, according to the MaxLinear cross-reference page. It is a Maxim Integrated Products RS-232 transceiver, while the target uses the SP3232EB family with a 250 kbps rate and 15 kV ESD protection. Confirm supply range, channel count, pin mapping, and ESD rating before production substitution.
Is the MAX232ACWE the same as the SP3232EBCN-L?
The MAX232ACWE is not an identical ordering code, but MaxLinear identifies it as a functional equivalent and pin-compatible replacement for the SP3232EBCN-L. Both provide RS-232 transceiver functionality, but engineers should compare supply voltage, driver and receiver configuration, data rate, temperature grade, and protection ratings. The SP3232EBCN-L is specifically listed at 250 kbps with 15 kV ESD protection.
What is the best MaxLinear equivalent for SP3232EBCN-L?
The MAX232ACWE is the best documented Maxim Integrated Products equivalent identified by the manufacturer cross-reference for the SP3232EBCN-L. The source describes it as functional-equivalent and pin-compatible, but it should still be reviewed against the target's +3.0 V to +5.5 V supply requirement, two-driver/two-receiver configuration, 250 kbps rate, and 15 kV ESD protection.
SP3232EBCN-L vs MAX3232ECD: which is better for an RS-232 interface?
The SP3232EBCN-L is the better documented choice when a +3.0 V to +5.5 V supply, 250 kbps rate, and 15 kV ESD rating are required, because those characteristics are explicitly listed for the target. The MAX3232ECD appears in comparison information, but the verified cross-reference does not provide a complete pin-compatible parameter table. Validate its pinout and ratings against the selected PCB and system requirements.
When should I choose SP3232EBCN-L over MAX232ACWE?
Choose the SP3232EBCN-L when the design requires its documented +3.0 V to +5.5 V operation, 250 kbps signaling rate, 15 kV ESD protection, or two transmit and two receive channels. Choose the MAX232ACWE when the manufacturer cross-reference is sufficient and its electrical ratings meet the lower-voltage, lower-rate, protection, or availability requirements of the completed design.
Where can I buy SP3232EBCN-L online?
Use the Request a Quote form on this page to ask about SP3232EBCN-L availability, minimum order quantity, lead time, and shipment configuration. The form provides a direct purchasing channel without embedding prices that may change. For engineering review, confirm the 16-SOIC package, supply range, channel configuration, and operating temperature before ordering.
What is the price and lead time for SP3232EBCN-L?
Request the current SP3232EBCN-L price, stock position, minimum order quantity, and lead time through the Request a Quote form on this page. Quote-based purchasing allows the order to reflect the required quantity and shipment format. Engineers should also specify whether the 16-pin SOIC delivery format is acceptable for the assembly process.

Engineering reference data for SP3232EBCN-L — comparison, design guidance, and compliance information.

Selection Guide

Choose the SP3232EBCN-L when the PCB requires a 2/2 RS-232 interface, a +3.0 V to +5.5 V supply, a 250 kbps data rate, and 15 kV ESD protection in a 16-pin SOIC package. Its 0.1 µF charge-pump capacitors make it particularly suitable for compact 3.3 V equipment. Consider SP3222EB only after confirming that its channel configuration matches the intended interface and that its pin assignments are unchanged. Consider MAX232ACWE when the manufacturer-documented pin-compatible equivalence is sufficient and its data rate, supply range, and protection rating satisfy the design. MAX3232ECD is appropriate for evaluation after its full pin and electrical specifications are checked. For production, verify every substitute against the manufacturer pinout and typical-application circuit rather than relying only on the SOIC footprint.

Comparison with Alternatives

Parameter This Product SP3222EB MAX232ACWE MAX3232ECD
Brand MaxLinear, Inc. MaxLinear, Inc. Maxim Integrated Maxim Integrated
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
RS-232 Transceiver Type 2/2 full RS-232 transceiver RS-232 transceiver family member RS-232 transceiver 2/2 RS-232 transceiver

Key Differentiators

  • Lower supply-voltage operation (vs MAX232ACWE)
  • Documented 250 kbps signaling rate (vs MAX3232ECD)
  • 15 kV ESD protection (vs SP3222EB)

Design Notes

Place the 0.1 µF charge-pump capacitors and the manufacturer's recommended supply bypass capacitors directly beside their associated pins. Keep the high-voltage RS-232 driver nets short and isolated from low-level logic, clocks, and analog inputs. A solid ground connection is essential because the charge-pump and interface circuitry return switching and signal currents through the device ground pin.

Do not assume that identical 16-pin packages guarantee identical behavior. Before substituting another RS-232 transceiver, verify the numbered pin mapping, supply range, driver and receiver enable logic, data rate, temperature grade, and ESD rating. The SP3232EBCN-L is specified for +3.0 V to +5.5 V, 250 kbps, and 15 kV ESD protection, so a substitute should satisfy the complete set of those constraints.

RS-232 driver outputs can produce rapid voltage transitions that couple into nearby circuitry. Route TX and RX traces away from precision analog inputs, crystal circuits, and sensitive communication clocks, and provide a low-impedance chassis or board ground where required. If the connector is outside the controlled enclosure, add appropriately rated external surge and ESD protection rather than relying only on the IC's internal protection.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the SP3232EBCN-L.

Related Searches

sp3232ebcn datasheet sipex sp3232ebcn SP3232EBCN-L datasheet pdf SP3232EBCN-L pinout SP3232EBCN-L equivalent SP3232EBCN-L replacement SP3232EBCN-L cross reference SP3232EBCN-L vs MAX232ACWE SP3232EBCN-L footprint SP3232EBCN-L application circuit SP3232EBCN-L price SP3232EBCN-L stock MaxLinear SP3232EBCN-L SP3232EBCN-L 250 kbps RS-232

Related Components & Terms

MaxLinear, Inc. SP3232EBCN-L SP3232EB SP3222EB MAX232ACWE MAX3232ECD RS-232 RS-232 transceiver line transceiver interface IC semiconductor charge pump true +3.0 V to +5.5 V operation 250 kbps 15 kV ESD protection 0.1 µF capacitor 16-pin SOIC SOIC family surface mount SMD two-driver two-receiver configuration data logger industrial controller portable instrumentation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details