SP3232EBCN-L - 250kbps RS-232 Transceiver | MaxLinear
MPN: SP3232EBCN-L ✓ 啟用中SP3232EBCN-L 概覽
An RS-232 transceiver is an interface IC that converts logic-level signals to and from differential voltage levels used by RS-232 ports. A complete dual transceiver combines transmitter and receiver functions on each channel. The transmitter raises a digital signal to RS-232 voltage levels, while the receiver converts those voltage levels back into logic-compatible signals. This bidirectional level conversion allows a host, controller, or embedded system to connect to a conventional serial port using one compact integrated circuit.
The SP3232EBCN-L uses a high-efficiency charge-pump power supply that permits true RS-232 operation from a single supply. According to the manufacturer documentation, only 0.1 µF charge-pump capacitors are required in 3.3 V operation. This integration reduces the external component count compared with discrete RS-232 interface approaches and is valuable in portable and hand-held equipment where board area and power consumption are constrained.
With two transmit channels and two receive channels, the device supports simultaneous RS-232 activity on two logical channels. Its listed maximum signaling rate of 250 kbps provides ample margin for common serial links, including point-of-sale terminals, data-acquisition equipment, industrial controls, and service interfaces. The 16-SOIC package also supports conventional surface-mount assembly and is easier to inspect and rework than fine-pitch leadless packages.
Typical applications include configuration and service ports in portable instruments, RS-232 links in industrial control equipment, data-logger connections, POS-system peripherals, and legacy communications ports in embedded systems. The 3.0 V to 5.5 V supply range permits use in both 3.3 V and 5 V system architectures, while the 0 °C to +70 °C commercial-temperature range suits indoor commercial and industrial equipment.
When laying out the circuit, place the charge-pump capacitors and interface bypass capacitors close to their associated supply and charge-pump pins. Keep the RS-232 driver outputs away from sensitive analog or high-speed digital traces, and connect the device ground to the circuit ground at a low-impedance point. A protection network should be added when the connector is exposed to cables longer than the controlled enclosure boundary.
This product page combines the manufacturer specifications, verified RS-232 interface characteristics, cross-reference data, package guidance, and practical design considerations. It is intended to help engineers confirm supply compatibility, channel count, signaling rate, temperature range, ESD protection, and replacement suitability before placing the SP3232EBCN-L into a new or existing design.
直接替換替代品,適用於 SP3232EBCN-L — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SP3232EBCN-L (相同外形與佔位) — 差異在於 Package, Product Type, Maximum Data Rate, ESD Protection, Number of Drivers.
SP3222EBEY-L/TR
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX232ACWE
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3232ECD
✅ 直接替換聯絡詢價
查看資料表 →SP3232EBCN-L 規格
| Product Type | 2/2 RS-232 transceiver |
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| Maximum Data Rate | 250 kbps |
| Supply Voltage Range | +3.0 V to +5.5 V |
| 工作溫度範圍 | 0 °C to +70 °C |
| ESD Protection | 15 kV |
| Charge-Pump Capacitor Requirement | 0.1 µF in 3.3 V operation |
| Interface Standard | RS-232 |
| Transceiver Configuration | 2 transmit and 2 receive channels |
| 封裝 | 16-pin SOIC |
| Package Pin Count | 16 pins |
| 安裝類型 | Surface mount |
SP3232EBCN-L 16 pins 腳位配置指南
SP3232EBCN-L(16 pins 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SP3232EBCN-L.
請參閱 資料表 以查看完整腳位配置。
典型應用
SP3232EBCN-L 適用於 6 應用s: Portable Instrument Service Port, Industrial Controller RS-232 Interface, Data Logger Serial Connection, Point-of-Sale Peripheral Link, Legacy Computer Serial Adapter, Security Camera Installation Interface.
Portable Instrument Service Port
The SP3232EBCN-L fits a portable instrument that exposes an RS-232 configuration or service port while operating from a 3.3 V system rail. Its +3.0 V to +5.5 V supply range and 0.1 µF charge-pump capacitor requirement support a compact implementation. The two transmitters and two receivers allow two logical serial channels without using separate interface ICs. The specified 250 kbps rate is comfortably above common service-port traffic, while 15 kV ESD protection strengthens a connector-facing circuit.
推薦
Industrial Controller RS-232 Interface
The SP3232EBCN-L is appropriate for an industrial controller that must communicate with RS-232 equipment over a wired configuration or diagnostic port. Two transmit and two receive channels support multiple device relationships while conserving board area. Its 0 °C to +70 °C operating range suits controlled indoor equipment, and its 250 kbps maximum rate accommodates ordinary command and status traffic. The 3.0 V to 5.5 V supply range also permits deployment in both 3.3 V and 5 V controller platforms.
推薦
Data Logger Serial Connection
The SP3232EBCN-L can connect a data logger to a legacy RS-232 host using one dual transceiver. Its 250 kbps data rate supports the throughput expected from sampled data, command traffic, and status reporting, while two receivers permit monitoring of more than one incoming signal. Operation from a single +3.0 V to +5.5 V supply simplifies portable logger designs, and the 15 kV ESD rating provides useful protection where the serial cable is user accessible.
推薦
Point-of-Sale Peripheral Link
The SP3232EBCN-L is suitable for a point-of-sale peripheral that uses an RS-232 receipt printer, customer display, scanner, or service interface. The two transmit and two receive channels can support paired communication paths while keeping the design compact. A 250 kbps maximum rate is sufficient for transaction messaging and peripheral control, and the device accepts 3.3 V or 5 V system rails. Its 15 kV ESD protection is valuable when peripheral cables are repeatedly connected by operators.
推薦
Legacy Computer Serial Adapter
The SP3232EBCN-L provides a practical interface bridge between a modern embedded controller and a legacy RS-232 port. Two drivers and two receivers support bidirectional equipment communication while maintaining a conventional 16-SOIC footprint. The +3.0 V to +5.5 V operating range lets the adapter operate beside modern 3.3 V logic, and the 250 kbps rate covers standard peripheral command traffic. Use an appropriate level shifter when the connected logic domain is not 3.3 V or 5 V.
推薦
Security Camera Installation Interface
The SP3232EBCN-L can support an RS-232 control channel in a security camera or installation tool used to adjust addresses, communications settings, or actuator functions. The 250 kbps rate is more than adequate for short control commands and status exchanges. Two transmit and two receive channels allow a compact multi-command interface, while the 0 °C to +70 °C range is appropriate for indoor cameras and commissioning equipment. The 15 kV ESD rating adds protection for accessible installation cables.
推薦
推薦產品摘要
工程參考資料,適用於 SP3232EBCN-L — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SP3222EB | MAX232ACWE | MAX3232ECD |
|---|---|---|---|---|
| Brand | MaxLinear, Inc. | MaxLinear, Inc. | Maxim Integrated | Maxim Integrated |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| RS-232 Transceiver Type | 2/2 full RS-232 transceiver | RS-232 transceiver family member | RS-232 transceiver | 2/2 RS-232 transceiver |
主要差異化特點
- Lower supply-voltage operation (對比MAX232ACWE)
- Documented 250 kbps signaling rate (對比MAX3232ECD)
- 15 kV ESD protection (對比SP3222EB)
設計說明
Place the 0.1 µF charge-pump capacitors and the manufacturer's recommended supply bypass capacitors directly beside their associated pins. Keep the high-voltage RS-232 driver nets short and isolated from low-level logic, clocks, and analog inputs. A solid ground connection is essential because the charge-pump and interface circuitry return switching and signal currents through the device ground pin.
Do not assume that identical 16-pin packages guarantee identical behavior. Before substituting another RS-232 transceiver, verify the numbered pin mapping, supply range, driver and receiver enable logic, data rate, temperature grade, and ESD rating. The SP3232EBCN-L is specified for +3.0 V to +5.5 V, 250 kbps, and 15 kV ESD protection, so a substitute should satisfy the complete set of those constraints.
RS-232 driver outputs can produce rapid voltage transitions that couple into nearby circuitry. Route TX and RX traces away from precision analog inputs, crystal circuits, and sensitive communication clocks, and provide a low-impedance chassis or board ground where required. If the connector is outside the controlled enclosure, add appropriately rated external surge and ESD protection rather than relying only on the IC's internal protection.
合規資訊
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the SP3232EBCN-L.