STMicroelectronics

STM32F042F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

MPN: STM32F042F4P6 ✓ Active
2.4 V to 3.6 V Vdss 20-pin TSSOP Package 48 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

STM32F042F4P6 Overview

The STMicroelectronics STM32F042F4P6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 16 KB of Flash memory, 6 KB of SRAM, and USB, CAN, and CEC connectivity in a 20-pin TSSOP package. The device is designed for compact embedded systems requiring a low-cost general-purpose MCU, a USB peripheral, and communication interfaces in a small surface-mount footprint.

A microcontroller is an integrated semiconductor containing a processor core, memory, and peripherals on one chip. The STM32F0 MCU family belongs to the embedded-processing hierarchy: microcontroller → 32-bit RISC MCU → ARM Cortex-M0 microcontroller → embedded-control device. Its combination of 48 MHz processing speed, USB connectivity, and a 20-pin package makes it useful for USB-connected control, industrial interface, and compact consumer products.

Key features include a 32-bit ARM Cortex-M0 core, 48 MHz maximum operating frequency, and 16 KB of Flash for firmware storage. The device also provides 6 KB of SRAM and integrated USB, CAN, and CEC functions. Its 2.4 V to 3.6 V operating-supply range suits 3.3 V systems, while the 20-TSSOP package supports compact, high-density PCB layouts. These characteristics balance processing performance and interface coverage without requiring a larger pin count.

The STM32F0 architecture is based on a 32-bit reduced-instruction-set-computing core intended for efficient embedded control. Flash-resident code and SRAM support boot-time firmware, event handling, communication stacks, and peripheral control, while USB and CAN provide paths for connected equipment and industrial networking. The USB and CAN interfaces distinguish this device from basic Cortex-M0 microcontrollers that support only serial or general-purpose interfaces.

Typical applications include USB human-interface-interface accessories, compact industrial controllers, CAN-connected sensors, consumer electronics, and battery-operated equipment. The MCU can also manage LED interfaces, communication bridges, and low-speed embedded control tasks where board area is constrained. Its 20-pin package and 3.3 V supply architecture simplify integration into compact USB dongles, control modules, and secondary embedded processors.

Designers should reserve all 20 TSSOP positions, route the USB data and power pins according to the manufacturer reference design, and confirm firmware support for the selected USB, CAN, and CEC peripheral configuration before PCB release. The 16 KB Flash limit requires attention to bootloader size, protocol libraries, and application code. For a production migration, verify pin multiplexing, clock setup, peripheral mapping, and interrupt behavior against the manufacturer datasheet.

This page combines the official STM32F042F4 product information, exact-order-code listings, interface and memory details, same-brand drop-in alternatives, and practical integration guidance. It is intended to accelerate part selection, schematic review, firmware planning, and footprint verification for engineers designing with the STM32F042F4P6.

Drop-in alternatives for STM32F042F4P6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with STM32F042F4P6 (same form factor and footprint) — differing in Flash Memory, Product Type, Package, SRAM, ADC Resolution.

Microchip Technology
Flash Memory: 64 KB
Package: 48-pin QFN
SRAM: 8 KB
Compare with STM32F042F4P6 →
STMicroelectronics
SRAM: 4 KB
ADC Resolution: 12-bit and 15-bit
Compare with STM32F042F4P6 →
STMicroelectronics
Flash Memory: 32 KB (32K x 8)
ADC Resolution: 12 bit
Compare with STM32F042F4P6 →
STMicroelectronics
Flash Memory: 32 KB (32K x 8)
Product Type: ARM Cortex-M0 32-bit microcontroller
Package: 20-TSSOP
Compare with STM32F042F4P6 →
STMicroelectronics
Flash Memory: 32 KB (32K x 8)
Product Type: 32-bit Microcontroller
Compare with STM32F042F4P6 →
STMicroelectronics
Flash Memory: 16 KB
Product Type: 32-bit ultra-low-power microcontroller
Compare with STM32F042F4P6 →

STM32F042F6P6

✅ Drop-In
STMicroelectronics
📦 20-pin TSSOP
32-bit ARM Cortex-M0 microcontroller · ARM Cortex-M0 · 48 MHz · 32 bit · 32 KB (32K x 8) · 12 bit

Contact for price

View Datasheet →

STM32F042F4P7

✅ Drop-In ⚠️ Specs Unverified
📦 20-pin TSSOP
Same 48 MHz Cortex-M0 core and 16 KB Flash class, with the order-code temperature grade differing from P6

📋 Reference alternative (not in catalog)

STM32F070F4P6

✅ Drop-In
📦 20-pin TSSOP
Retains 16 KB Flash and the 48 MHz class but changes the STM32 peripheral family from F042 to F070

📋 Reference alternative (not in catalog)

STM32F070F6P6

✅ Drop-In
STMicroelectronics
📦 20-pin TSSOP
32-bit Microcontroller · Arm Cortex-M0 · 48 MHz · 32 KB (32K x 8) · 6 KB · Yes · 2.5 V to 3.3 V · 32-bit RISC

Contact for price

View Datasheet →

STM32F030F4P6

✅ Drop-In
STMicroelectronics
📦 20-pin TSSOP
Arm Cortex-M0 32-bit RISC · 48 MHz · 16 KB (16K x 8) · 4 KB · 2.4 V to 3.6 V · Arm-based 32-bit RISC · 12-bit and 15-bit · 20-pin TSSOP

Contact for price

View Datasheet →

STM32F042F4P6 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M0 microcontroller
Core ARM Cortex-M0
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB (16K x 8)
SRAM 6 KB
Operating Supply Voltage 2.4 V to 3.6 V
Operating Temperature -40 °C to +85 °C
USB Interface Yes, USB device line
CAN Interface Yes
CEC Interface Yes
ADC Resolution 12-bit
Package 20-pin TSSOP
Package Width 4.40 mm
Mounting Type Surface mount
Packing Type Tube
RoHS Status Compliant
Program Memory Type Flash
Bit Width 32-bit
Peripheral Pin Count 20 pins
ECN US-3A991.a.2

STM32F042F4P6 4.40 mm Pin Configuration Guide

Pin configuration for STM32F042F4P6 (4.40 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

4.40 mm package pinout diagram for STM32F042F4P6

No detailed pinout data available for STM32F042F4P6.

Refer to the datasheet for full pin configuration.

Typical Applications

STM32F042F4P6 is suitable for 6 applications: USB Human-Interface Devices, CAN-Connected Industrial Control, Consumer Interface and Control Module, Battery-Powered Embedded Sensor Node, CEC-Connected Consumer Electronics, LED and Compact Automation Controller.

🧩

USB Human-Interface Devices

The STM32F042F4P6 fits USB keyboards, mice, game controllers, and configuration adapters because its 48 MHz Cortex-M0 core can service USB traffic while the device includes dedicated USB, CAN, and CEC connectivity. The 16 KB Flash provides a constrained environment for a boot program, USB class code, and device logic, while 6 KB of SRAM supports packet handling and control state. Its 20-pin TSSOP package reduces board footprint in compact USB accessories. The principal design consideration is firmware capacity: USB middleware, descriptors, and application behavior must be selected and measured against the 16 KB limit before layout release.

🏭

CAN-Connected Industrial Control

The STM32F042F4P6 is appropriate for compact CAN-connected controllers because it combines a CAN interface with a 48 MHz ARM Cortex-M0 core and 16 KB of Flash. It can handle sensor polling, state-machine control, diagnostic reporting, and communication framing within a 4.40 mm-wide 20-pin TSSOP footprint. The 2.4 V to 3.6 V operating range aligns with 3.3 V industrial circuitry. Designers should allocate flash space carefully, confirm the exact peripheral and pin assignments, and validate bus timing, termination, isolation, and EMC requirements against the final CAN transceiver and system topology.

📱

Consumer Interface and Control Module

The STM32F042F4P6 can serve as the controller in a compact consumer interface module that needs USB connectivity, embedded logic, and modest local memory. Its 48 MHz Cortex-M0 core provides adequate performance for button handling, indicator control, status reporting, and communication with a host device. The 20-pin TSSOP package is useful where product volume and board area are tightly constrained, while the 16 KB Flash and 6 KB SRAM are sufficient for focused, optimized firmware. Product developers should reserve programming and debug access, avoid unnecessary middleware, and verify start-up behavior across the complete USB power and brownout sequence.

🔋

Battery-Powered Embedded Sensor Node

The STM32F042F4P6 is useful in a battery-powered sensor node when low-voltage operation, local processing, and compact packaging are priorities. The listed 2.4 V to 3.6 V supply range supports regulated 3.3 V sensor systems, and the 16 KB Flash can hold tightly scoped acquisition and control routines. Its 48 MHz Cortex-M0 core permits responsive sampling and event processing without a larger package. Battery design remains dominated by regulator efficiency, quiescent load, and sensor duty cycle, so developers should minimize USB activity and use the MCU's low-power modes only after validating wake timing, retention, and peripheral reinitialization.

📺

CEC-Connected Consumer Electronics

The STM32F042F4P6 fits compact consumer products that need CEC control alongside general embedded processing. The MCU's 48 MHz Cortex-M0 core and 6 KB of SRAM are sufficient for command handling, device-state management, and simple user-interface coordination, while the 20-pin TSSOP package supports board-area reduction. The 16 KB Flash limit encourages a compact protocol implementation and disciplined driver selection. Before schematic release, engineers should confirm the exact CEC pin mapping, electrical levels, pull requirements, and interaction with the product's power-management and infrared or physical bus implementation.

💡

LED and Compact Automation Controller

The STM32F042F4P6 can act as a compact controller for LED fixtures, status indicators, or small automation products. Its 48 MHz core supports deterministic timer-based dimming, sequencing, button input, and communication updates, while the TSSOP-20 package leaves more board area for power components and connectors. The integrated USB interface can simplify configuration or service access in production and diagnostic setups. Firmware developers should calculate timer and DMA requirements within the STM32F042 peripheral set, budget the 16 KB Flash for lighting algorithms, and confirm that the selected pin multiplexing does not conflict with USB, CAN, or other assigned functions.

Recommended Products Summary

STM32F042F6P6 STMicroelectronics Used in: USB Human-Interface Devices, Consumer Interface and Control Module, CEC-Connected Consumer Electronics STM32F070F6P6 STMicroelectronics Used in: USB Human-Interface Devices, CAN-Connected Industrial Control, CEC-Connected Consumer Electronics STM32F030F4P6 STMicroelectronics Used in: CAN-Connected Industrial Control, Battery-Powered Embedded Sensor Node, LED and Compact Automation Controller STM32F070F4P6 Same-package STM32F0 alternative with the same 16 KB Flash class Used in: Consumer Interface and Control Module, LED and Compact Automation Controller STM32F042F4P7 Same-family order-code option for differing temperature-grade requirements Used in: Battery-Powered Embedded Sensor Node
Can STM32F042F4P6 be used with USB?
The STM32F042F4P6 can be used with USB because it belongs to STMicroelectronics' USB-line STM32F0 family. The device provides a 48 MHz ARM Cortex-M0 core, 16 KB of Flash, 6 KB of SRAM, and USB connectivity in a 20-pin TSSOP package. Mouser identifies the exact order code as a USB-line MCU with USB and CAN functions, while the manufacturer product page describes the STM32F042x4/x6 family. Firmware must configure the USB peripheral, clocks, and interrupt priorities for the intended USB class or device role.
What are the key specifications of STM32F042F4P6 that engineers should know?
The STM32F042F4P6 is a 48 MHz, 32-bit ARM Cortex-M0 MCU with 16 KB of Flash and 6 KB of SRAM in a 20-pin TSSOP package. Its notable interfaces include USB, CAN, and CEC, and its listed operating-supply range is 2.4 V to 3.6 V. The manufacturer identifies the STM32F042x4/x6 family as a Cortex-M0 platform, and the exact order code is listed by DigiKey and Mouser as a USB-line MCU. Designers should budget the 16 KB Flash carefully for boot code, USB libraries, and application firmware.
Where can I download the STM32F042F4P6 datasheet PDF?
The STM32F042F4P6 datasheet and supporting documents are available from the official STMicroelectronics STM32F042F4 product page at https://www.st.com/en/microcontrollers-microprocessors/stm32f042f4.html. That manufacturer page is the preferred starting point for the product datasheet, pin definitions, electrical characteristics, memory map, and peripheral documentation. DigiKey also identifies the exact part as a 48 MHz Cortex-M0 MCU with 16 KB Flash in a 20-TSSOP package. Use the document revision associated with the current production device when performing design verification.
Where can I find the STM32F042F4P6 pinout?
The STM32F042F4P6 pinout is found in the pin-description information within the official STM32F042F4 manufacturer documentation. The component uses a 20-pin TSSOP package, so the board footprint must provide all 20 device positions and expose the relevant power, ground, clock, reset, programming, and I/O connections. Do not infer alternate-function assignments from a generic STM32F0 diagram because package variants can have different peripheral mappings. Use the exact STM32F042F4P6 pin table when assigning USB, CAN, CEC, ADC, timer, and debug functions.
Is STM32F042F4P6 suitable for industrial control applications?
The STM32F042F4P6 is suitable for compact industrial control applications that require USB or CAN connectivity and modest firmware capacity. It combines a 48 MHz Cortex-M0 core with 16 KB of Flash, 6 KB of SRAM, a 2.4 V to 3.6 V supply range, and an operating-temperature range of -40 °C to +85 °C. Its 20-pin TSSOP package supports space-constrained control boards. For production use, confirm EMC requirements, peripheral availability, firmware size, and any application-specific qualification separately.
What is the difference between STM32F042F4P6 and STM32F042F6P6?
The principal listed difference is Flash capacity: STM32F042F4P6 contains 16 KB, while STM32F042F6P6 contains 32 KB. Both use the 20-TSSOP package and appear in the STM32F042x4/x6 family, so their physical placement is compatible. The STM32F042F6P6 is preferable when boot code, USB middleware, or application firmware exceeds the 16 KB limit. Confirm all peripheral pin assignments and electrical conditions before treating the higher-memory device as a drop-in production substitute.
STM32F042F4P6 vs STM32F030F4P6: which is better for a USB design?
The STM32F042F4P6 is the better starting point for a USB design because it is explicitly identified as a USB-line MCU with USB and CAN functions. The STM32F030F4P6 is also listed as a 20-TSSOP Cortex-M0 device operating at 48 MHz with a 2.4 V to 3.6 V supply, but its USB capability is not established by the cited comparison information. Both retain 16 KB of Flash, making peripheral availability and firmware requirements more important than raw clock speed when choosing between them.
STM32F042F4P6 vs STM32F070F6P6: which is better for a CAN-connected controller?
The STM32F042F4P6 offers USB, CAN, and CEC functions with 16 KB of Flash, while the STM32F070F6P6 is listed with 32 KB of Flash in the same 20-TSSOP format. Choose STM32F042F4P6 when USB and CEC connectivity are required and 16 KB of code space is sufficient; choose STM32F070F6P6 when firmware capacity is the priority and the required CAN implementation is supported. Because both occupy 20 pins, verify package-level pin multiplexing and migration firmware before releasing a substitution.
What can replace STM32F042F4P6?
The closest same-family drop-in candidates are STM32F042F6P6, STM32F070F4P6, STM32F070F6P6, STM32F030F4P6, and STM32F042F4P7, all using a 20-pin TSSOP footprint. The replacement choice depends on memory capacity and required peripherals: STM32F042F6P6 adds Flash, while STM32F030F4P6 may suit designs that do not require the F042 USB-line feature set. A footprint-compatible device still requires verification of pin multiplexing, firmware, clock configuration, and peripheral behavior.
When should I choose STM32F042F4P6 over STM32F070F6P6?
Choose STM32F042F4P6 when the design benefits from the STM32F042 family's USB-line feature set, including USB, CAN, and CEC, and can operate within its 16 KB Flash allocation. Choose STM32F070F6P6 when 32 KB of Flash is more important and the required application does not depend on an F042-only peripheral or pin assignment. Both are listed at 48 MHz in 20-pin TSSOP packages, so memory requirements and USB, CAN, and CEC compatibility should drive the decision.
Is STM32F042F4P6 active for new designs?
The STM32F042F4P6 is identified as active in the product-status information associated with the exact device. STMicroelectronics also publishes an active manufacturer product page for the STM32F042F4 family. New designs can therefore target the exact 16 KB, 20-TSSOP order code, subject to normal production and supply-chain confirmation. Request current lifecycle, stock, and lead-time information through the Request a Quote form on this page before committing to a production schedule.
Where can I buy STM32F042F4P6 online?
The STM32F042F4P6 can be requested for quotation through the Request a Quote form on this page. The exact order code is listed for the 20-TSSOP package with 16 KB of Flash and a 48 MHz Cortex-M0 core. Confirm the package suffix, tube or reel delivery format, target quantity, and required shipping destination with the supplier. Current commercial terms should always be checked at the time of quotation because availability and lead time can change.
What is the price of STM32F042F4P6?
Use the Request a Quote form on this page for the current price and quantity breaks of STM32F042F4P6. The commercial listing identifies the exact 16 KB Flash, 20-TSSOP order code, but its displayed amount is a starting reference rather than a qualifying quantity-break table. A quotation should confirm the unit price, minimum order quantity, delivery format, and any lot-dependent adjustments. The structured offer on this page is updated when current supplier pricing becomes available.
What is the lead time for STM32F042F4P6?
Request the current STM32F042F4P6 lead time through the Request a Quote form on this page. The exact device is listed as an active, 20-pin TSSOP STM32F042x4/x6 MCU with 16 KB of Flash, but a shipment lead time is not a fixed device specification. Include your required quantity, delivery packaging, production date, and destination country in the request. This allows the supplier to confirm current availability and scheduling rather than relying on a potentially outdated generic estimate.
Is STM32F042F4P6 in stock?
Current stock for STM32F042F4P6 should be confirmed through the Request a Quote form on this page. The product is identified as active, and distributor listings exist for the exact 20-TSSOP order code, but availability can vary by quantity and package-delivery format. State the required order quantity and whether you need tube or reel packing in the request. The quotation response provides the current supply position for that specific configuration.

Engineering reference data for STM32F042F4P6 — comparison, design guidance, and compliance information.

Selection Guide

Choose STM32F042F4P6 when a compact 3.3 V embedded design needs a 48 MHz Cortex-M0 core, 16 KB of Flash, and the STM32F042 family's USB, CAN, and CEC connectivity in a 20-pin TSSOP package. Choose STM32F042F6P6 when the footprint is acceptable but boot code, USB middleware, or application logic exceeds the 16 KB limit. STM32F070F4P6 can suit a design that remains within 16 KB Flash, while STM32F070F6P6 favors additional firmware capacity; both require a complete peripheral and pin-mapping review. STM32F030F4P6 may fit simpler control functions that do not depend on the STM32F042 USB-line feature set. For every alternative, verify supply conditions, temperature grade, clock configuration, interrupt vectors, boot behavior, USB or CAN functionality, and firmware support before approving it as a drop-in production replacement.

Comparison with Alternatives

Parameter This Product STM32F042F6P6 STM32F042F4P7 STM32F070F4P6 STM32F070F6P6 STM32F030F4P6
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Core ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 16 KB 32 KB 16 KB 16 KB 32 KB 16 KB

Key Differentiators

  • Combines USB, CAN, and CEC in the same STM32F042 USB-line family (vs STM32F030F4P6)
  • Lower Flash demand supports focused embedded firmware (vs STM32F042F6P6)
  • Retains the same 20-TSSOP placement while offering a different memory balance (vs STM32F070F6P6)

Design Notes

Reserve the complete 20-pin TSSOP footprint and follow the manufacturer package drawing for pad dimensions, lead pitch, solder-mask clearance, and exposed pad requirements. Place all decoupling capacitors close to their associated power pins, with a short and low-impedance ground return. Because this is a mixed-signal communication MCU, route USB data as a short, continuous pair away from switching nodes and provide the required USB routing geometry on the board stack-up.

Do not assume that a 20-TSSOP footprint match guarantees a functional drop-in migration. The STM32F042, STM32F070, and STM32F030 families can differ in peripheral availability, alternate-function mappings, interrupt vectors, clock trees, and firmware support. Build a pin-by-pin comparison against the exact alternative datasheet, then recompile and test the application, USB enumeration, CAN communication, boot flow, and low-power transitions before releasing a revised PCB.

Design the supply for 2.4 V to 3.6 V operation and account for USB attachment, boot, and peripheral-load transients rather than checking only steady-state current. Keep the MCU supply within the manufacturer limits during startup, brownout recovery, and USB bus transitions. Place bulk and high-frequency bypass capacitance at the power entry and device pins, verify regulator startup against internal reset timing, and use the device's low-power modes only after measuring real peripheral and board-level standby current.

Keep programming and debug access available on the assembled PCB even if the product does not expose a user connector. Route SWDIO and SWCLK with short, clean traces and provide a controlled boot configuration path. Avoid assigning high-current outputs, relays, or inductive switching nodes to pins adjacent to sensitive communication or debug functions unless the package pin table confirms the intended multiplexing. Verify the 48 MHz clock source layout and decoupling strategy in the manufacturer reference design.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact-device comparison information identifies RoHS compliance and the industrial temperature grade. Other environmental and supply-chain declarations require confirmation for the specific order code.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

stm32f042f4p6 can STM32F042F4P6 datasheet STM32F042F4P6 datasheet pdf STM32F042F4P6 pinout STM32F042F4P6 specifications STM32F042F4P6 USB CAN STM32F042F4P6 48MHz 16KB STM32F042F4P6 TSSOP-20 STM32F042F4P6 replacement STM32F042F4P6 vs STM32F030F4P6 STM32F042F4P6 vs STM32F070F6P6 STM32F042F4P6 price STMicroelectronics STM32F042F4P6 STM32F042F4P6 application circuit

Related Components & Terms

STMicroelectronics STM32F042F4P6 STM32F042F4 STM32F042F6P6 STM32F042F4P7 STM32F070F4P6 STM32F070F6P6 STM32F030F4P6 ARM Cortex-M0 32-bit RISC core microcontroller embedded processor semiconductor USB CAN CEC 12-bit ADC 16 KB Flash memory 6 KB SRAM 48 MHz clock 2.4 V to 3.6 V supply 20-pin TSSOP TSSOP package family surface-mount technology RoHS
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details