STM32H733ZGT6 - 550MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
MPN: STM32H733ZGT6 ✓ ActiveSTM32H733ZGT6 Overview
An Arm Cortex-M7 microcontroller is a high-performance member of the embedded MCU hierarchy. It combines a 32-bit RISC processor, dedicated caches, hardware acceleration, and a broad peripheral set in one integrated circuit. The STM32H7 family is positioned between conventional embedded controllers and more complex application processors, supporting real-time control, communications, data acquisition, industrial equipment, and connected products while retaining deterministic peripheral access.
The STM32H733ZGT6 operates at up to 550 MHz and includes 1 MB of flash for firmware and data. Its 564 KB of RAM supports the Cortex-M7 cache and application working memory. The device provides Ethernet, USB, three FD-CAN channels, a subset of graphics functions, and a subset of peripherals. Two 16-bit ADCs support higher-resolution analog measurements, while dedicated cryptographic and hash hardware accelerates suitable security and integrity workloads.
The STM32H733xG architecture is based on the high-performance 32-bit Arm Cortex-M7 RISC core. Its performance is supported by the L1 cache and external memory interface, which help reduce the effect of memory latency during high-rate control or signal-processing workloads. The inclusion of double-precision floating-point hardware makes the MCU suitable for DSP algorithms, industrial mathematics, and control calculations that benefit from hardware arithmetic acceleration.
Typical uses include industrial automation, networked control equipment, communications gateways, motor and motion-control systems, test and measurement instruments, high-resolution data-acquisition systems, and embedded graphical or multimedia products. Ethernet and USB connectivity suit connected equipment, while FD-CAN interfaces support robust industrial and vehicle-related networking. The large flash and RAM capacity also helps consolidate complex control, communications, and data-processing functions onto one microcontroller.
Hardware design should follow the pin, power, decoupling, clock, and exposed-pad requirements in the manufacturer datasheet. The LQFP package provides 144 external pins, but the thermal and electrical design remains sensitive to supply routing and high-speed signal integrity. Confirm startup, clock, memory-device, and firmware support before releasing a new PCB layout.
This product record combines the manufacturer specifications with practical package, application, comparison, and design guidance. It is intended to accelerate component selection and help engineers evaluate the STM32H733ZGT6 for high-performance embedded systems, particularly where 550 MHz processing, 564 KB of RAM, and extensive connectivity must coexist in one 144-pin LQFP device.
Drop-in alternatives for STM32H733ZGT6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with STM32H733ZGT6 (same form factor and footprint) — differing in Package, External Memory Interface, Flash Memory, Maximum CPU Frequency, ADC Resolution.
STM32H723ZGT6
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →STM32H743ZGT6
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →STM32H753ZGT6
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
STM32H750ZGT6
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
STM32H7A3ZGT6
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
STM32H733ZGT6 Maximum Ratings & Electrical Characteristics
| CPU Core | Arm Cortex-M7 with double-precision FPU |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 550 MHz |
| Flash Memory | 1 MB (1 M x 8 bits) |
| RAM | 564 KB |
| L1 Cache | Present |
| External Memory Interface | Present |
| Ethernet | Present |
| USB | Present |
| FD-CAN Interfaces | 3 |
| ADC Resolution | 16-bit |
| ADC Count | 2 |
| Crypto Accelerator | Present |
| Hash Accelerator | Present |
| Graphics Support | Subset of peripherals |
| Package | 144-LQFP, 20 mm x 20 mm |
| Mounting Type | Surface mount |
STM32H733ZGT6 144-lqfp, 20 mm x 20 mm Pin Configuration Guide
Pin configuration for STM32H733ZGT6 (144-lqfp, 20 mm x 20 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for STM32H733ZGT6.
Refer to the datasheet for full pin configuration.
Typical Applications
STM32H733ZGT6 is suitable for 6 applications: Industrial Automation Controllers, EtherNet/IP and Industrial Gateways, High-Speed Data Acquisition, Test and Measurement Instruments, Motor and Motion Control, Connected Embedded Equipment.
Industrial Automation Controllers
The STM32H733ZGT6 fits industrial automation controllers that combine real-time control with network management. Its 550 MHz Cortex-M7 core provides substantial processing capacity, while 564 KB of RAM supports state machines, diagnostics, and communication buffers. Ethernet and three FD-CAN controllers allow the controller to connect to supervisory networks and field equipment over separate communication paths. Two 16-bit ADCs support sensor acquisition where greater conversion resolution is useful. The 1 MB flash capacity provides room for application code, networking stacks, and configuration data. Firmware should partition real-time control tasks from network services and validate all peripheral multiplexing against the manufacturer pin table.
Recommended
EtherNet/IP and Industrial Gateways
The STM32H733ZGT6 is suitable for an Ethernet-connected industrial gateway because it combines a 550 MHz processor, 1 MB flash, and 564 KB of RAM with dedicated Ethernet support. The processor can manage protocol conversion, local control, and data buffering without relying on an external application processor. USB provides a convenient local service or configuration path, while FD-CAN channels support downstream equipment. The large memory footprint allows firmware to incorporate network stacks, fieldbus drivers, diagnostics, and update services. Design validation should include Ethernet clocking, physical-layer implementation, connector isolation, thermal rise, and sustained-throughput measurements under realistic packet traffic.
Recommended
High-Speed Data Acquisition
The STM32H733ZGT6 supports high-resolution data-acquisition systems that need more processing capability and memory than a conventional entry-level MCU. Its two 16-bit ADCs provide the primary analog conversion resources, while the 550 MHz Cortex-M7 core can perform filtering, scaling, statistics, and buffering. The L1 cache and external memory interface help manage data traffic, and 564 KB of RAM accommodates acquisition buffers and control state. USB or Ethernet can move collected data to a host system. Practical designs should account for analog front-end bandwidth, sampling synchronization, memory bandwidth, and the allocation of DMA channels before selecting the final peripheral configuration.
Recommended
Test and Measurement Instruments
The STM32H733ZGT6 fits test and measurement instruments that combine signal processing, control, and high-speed data transfer. Its 550 MHz Cortex-M7 core with double-precision floating-point hardware can execute filters, calibration routines, and numerical algorithms, while 564 KB of RAM supports measurement buffers. Ethernet and USB permit instrument control and result export, and the three FD-CAN channels can support industrial test fixtures or downstream instrumentation. Two 16-bit ADCs support precision front ends when the application architecture permits. Timing accuracy, analog-reference design, input protection, trigger latency, and sustained data-transfer behavior should be validated with the intended front-end and external memory configuration.
Recommended
Motor and Motion Control
The STM32H733ZGT6 is suitable for sophisticated motor and motion-control systems that require fast control-loop execution alongside communications. The 550 MHz Cortex-M7 core can execute complex algorithms and floating-point calculations, while the external memory interface permits access to larger working sets when needed. Three FD-CAN controllers are useful for distributed control networks, and Ethernet supports higher-rate plant or service connectivity. Two 16-bit ADCs can support current, position, or analog feedback when suitable conditioning is provided. A practical implementation should partition deterministic timing from communications, verify PWM and timer routing, and test control stability across temperature, voltage, and motor-drive operating conditions.
Recommended
Connected Embedded Equipment
The STM32H733ZGT6 supports connected embedded equipment requiring local processing and multiple wired communication paths. Ethernet handles network traffic, USB enables service connectivity, and three FD-CAN channels can connect to industrial or vehicle-oriented subsystems. The 550 MHz Cortex-M7 core and 564 KB of RAM allow the product to combine control, communications, and buffering in a single device, while 1 MB of flash accommodates embedded firmware and protocol stacks. Product designers should implement secure boot and update policies, partition communication tasks from real-time functions, and test connector protection, clock recovery, and network load during environmental qualification.
Recommended
Recommended Products Summary
Engineering reference data for STM32H733ZGT6 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | STM32H723ZGT6 | STM32H743ZGT6 | STM32H753ZGT6 | STM32H750ZGT6 | STM32H7A3ZGT6 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum CPU Frequency | 550 MHz | 550 MHz | 480 MHz | 550 MHz | 480 MHz | 2 GHz |
| Flash Memory | 1 MB | 1 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| RAM | 564 KB | 564 KB | 1 MB | 1 MB | 1 MB | 1 MB |
| Ethernet | Present | Present | Present | Present | Present | Present |
| FD-CAN Interfaces | 3 | 3 | 3 | 3 | 3 | 3 |
Key Differentiators
- Higher standard clock rate than H743 and H750 alternatives (vs STM32H743ZGT6)
- Larger RAM capacity than H723 (vs STM32H723ZGT6)
- Defined 1 MB flash configuration (vs STM32H753ZGT6)
Design Notes
Route the MCU's required supply rails from their source capacitors directly to the associated power and ground pins, with each decoupling capacitor placed close to the pin it serves. The 550 MHz operating rate makes supply-noise control essential: verify the selected regulator, capacitor ESR and capacitance requirements, startup sequence, and allowable transient response against the manufacturer electrical-characteristics tables before PCB release.
Preserve the package-specific escape geometry and place decoupling, clock, and boot-related components where the reference layout permits. Ethernet, USB, FD-CAN, ADC, and external-memory signals can be sensitive to return-path discontinuities and crosstalk. Use continuous ground planes, minimize high-current-loop area, and follow the manufacturer layout guidance for each enabled peripheral rather than routing every interface with one generic rule.
Do not treat a matching 144-LQFP outline as proof that two STM32H7 devices are interchangeable. Check every populated pin, alternate-function mapping, power pin, clock input, reset connection, boot configuration, memory configuration, and peripheral electrical limit. Compile and test the complete firmware on the selected device, including startup, communications, analog acquisition, and update behavior, before approving a substitution.
Compliance Information
Compliance status and qualification information were not stated in the manufacturer material accompanying this product record.