STM32L062K8U6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
MPN: STM32L062K8U6 ✓ ActiveSTM32L062K8U6 Overview
An ultra-low-power microcontroller is a semiconductor device that combines a processor core, memory, peripherals, and low-power control functions on one integrated circuit. The STM32L0 family belongs to the Arm Cortex-M microcontroller hierarchy and targets applications where battery life, standby consumption, and compactness are more important than maximum processing throughput. The STM32L062K8U6 adds USB connectivity and AES acceleration to that low-power platform.
Key features include a 32 MHz Arm Cortex-M0+ core, 64 KB (64K x 8) Flash memory, one 12-bit ADC with hardware oversampling, one DAC, two ultra-low-power comparators, and hardware AES. The device also includes one RTC, one LPTIM, three general-purpose 16-bit timers, one basic timer, SysTick, two watchdogs, and USB 2.0 crystal-less connectivity. These resources support sensor acquisition, low-speed data logging, secure accessory control, and compact user-interface systems.
The STM32L062x8 architecture combines an ultra-low-power core with a broad set of analog and timing resources. Its 12-bit ADC supports oversampling, allowing designers to improve effective input resolution and reduce quantization noise when the source impedance and acquisition time permit. AES hardware accelerates encryption and decryption operations, reducing processor workload compared with a software-only cryptographic implementation. Multiple timers and the RTC support periodic sampling, motor or load timing, and calendar-based scheduling.
Typical applications include USB-connected low-power sensors, compact industrial transducers, secure meter interfaces, battery-operated accessories, and embedded control modules. The 32-pin UFQFPN package is useful when board area is constrained, while its exposed-pad construction supports improved heat transfer when the PCB provides adequate copper.
When laying out the board, place decoupling capacitors close to the supply pins and preserve clean grounding around the exposed thermal pad. USB signal routing requires controlled impedance and a short connection to the connector. Firmware migration should also be reviewed because variants within the STM32L0 family can differ in USB, AES, memory size, and low-power features.
This product page organizes the principal electrical, memory, connectivity, analog, and packaging characteristics of the STM32L062K8U6. It also adds practical design guidance, package-focused comparison information, and sourcing answers for engineers planning a PCB, firmware migration, or production BOM.
Drop-in alternatives for STM32L062K8U6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with STM32L062K8U6 (same form factor and footprint) — differing in Package, Product Type, Architecture, Basic Timer, DAC.
STM32L052K8U6
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →STM32L061K8U6
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
STM32L051K8U6
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
STM32L062K8T6
✅ Drop-InContact for price
View Datasheet →STM32L062K8U6
✅ Drop-InContact for price
View Datasheet →STM32L062K8U6 Maximum Ratings & Electrical Characteristics
| Product Type | Ultra-low-power 32-bit Arm Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB (64K x 8) |
| CPU Core | Arm Cortex-M0+ |
| Architecture | 32-bit |
| USB Version | USB 2.0 crystal-less |
| ADC Resolution | 12-bit |
| ADC Oversampling | Supported |
| DAC | 1 DAC |
| Comparators | 2 ultra-low-power comparators |
| General-Purpose Timers | 3 x 16-bit |
| Low-Power Timer | 1 LPTIM |
| Basic Timer | 1 |
| RTC | 1 |
| Watchdogs | 2 |
| Hardware Encryption | AES |
| SysTick | 1 |
| Package | 32-pin UFQFPN (5 x 5 mm) |
| Mounting Type | Surface mount |
| Exposed Thermal Pad | Present |
STM32L062K8U6 32-pin ufqfpn (5 x 5 mm) Pin Configuration Guide
Pin configuration for STM32L062K8U6 (32-pin ufqfpn (5 x 5 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for STM32L062K8U6.
Refer to the datasheet for full pin configuration.
Typical Applications
STM32L062K8U6 is suitable for 6 applications: USB-connected low-power sensor nodes, Battery-powered industrial transducers, Secure USB accessories and dongles, Precision analog measurement systems, Low-energy data loggers, Battery-operated access-control terminals.
USB-connected low-power sensor nodes
The STM32L062K8U6 fits compact USB sensor nodes because it combines crystal-less USB 2.0 connectivity with a 12-bit ADC that supports hardware oversampling. A sensor conditioned to the MCU’s analog input range can be sampled while the Cortex-M0+ core handles configuration, filtering, and data framing. Its 64 KB Flash provides room for USB firmware, calibration data, and application logic. The trade-off is that USB activity and frequent conversions increase current consumption, so developers should use the STM32L0 low-power modes between measurement events and select external components according to the required sampling rate.
Recommended
Battery-powered industrial transducers
The STM32L062K8U6 is appropriate for battery-powered industrial transducers that require local measurement and control in a small enclosure. Two ultra-low-power comparators can monitor thresholds, the 12-bit ADC can acquire sensor signals, and the RTC and LPTIM support scheduled sampling without relying on a separate timing component. Its ultra-low-power STM32L0 architecture helps reduce standby energy, while the 64 KB Flash accommodates acquisition routines and calibration logic. Designers should calculate the complete energy budget from sensor standby current, ADC conversion time, wake frequency, and radio or USB activity rather than considering microcontroller current alone.
Recommended
Secure USB accessories and dongles
The STM32L062K8U6 supports secure USB accessories through the combination of USB 2.0 crystal-less connectivity and AES hardware acceleration. Encryption and decryption can be executed in dedicated hardware, reducing processor workload for protected data transfer or device authentication workflows. Its 32 MHz Cortex-M0+ core and 64 KB Flash are sufficient for compact protocol stacks and accessory firmware, while the 32-pin UFQFPN package limits board area. Designers must still define key storage, update procedures, authentication policy, and USB enumeration behavior because hardware acceleration alone does not establish system security.
Recommended
Precision analog measurement systems
The STM32L062K8U6 is useful for compact precision measurement systems because its 12-bit ADC supports hardware oversampling and its two comparators can perform threshold detection independently of the main CPU. Hardware oversampling can improve effective conversion quality when the input source, acquisition time, and noise conditions are suitable. The DAC also enables stimulus generation or output-reference functions in compact test equipment. The design trade-off is that analog performance depends on source impedance, reference stability, filtering, and PCB layout. Use the manufacturer’s application guidance to size input networks and establish an acquisition strategy appropriate for the required measurement bandwidth.
Recommended
Low-energy data loggers
The STM32L062K8U6 fits low-energy data loggers that periodically acquire analog values, timestamp events, and transfer records when a host becomes available. The RTC and low-power timer support time-based wake scheduling, while the 64 KB Flash stores firmware and a bounded amount of local data. Its comparator channels can supervise thresholds without continuous CPU polling, and USB 2.0 provides a wired transfer path when required. Designers should evaluate the flash endurance for repeated logging, partition buffers to preserve atomicity, and calculate write energy because frequent flash updates can dominate the battery budget even while the MCU itself operates at low power.
Recommended
Battery-operated access-control terminals
The STM32L062K8U6 can support compact battery-operated access-control terminals that read an input, evaluate a credential, and report activity through USB or a local interface. AES hardware acceleration benefits designs that perform authenticated communications, while the low-power STM32L0 platform helps manage energy between user events. The three 16-bit timers and RTC provide deterministic timing for actuator control, polling intervals, and scheduled access windows. The 32-pin UFQFPN package reduces board size, but designers should preserve the USB return path, secure any key material outside the MCU’s general-purpose memory where appropriate, and validate actuator timing under worst-case radio or bus activity.
Recommended
Recommended Products Summary
Engineering reference data for STM32L062K8U6 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | STM32L052K8U6 | STM32L061K8U6 | STM32L051K8U6 | STM32L062K8T6 | STM32L062K8U6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
Key Differentiators
- Combines USB connectivity and hardware AES in one low-power Cortex-M0+ device (vs STM32L052K8U6)
- Preserves a 64 KB Flash configuration across the principal same-package alternatives (vs STM32L061K8U6)
- Combines analog conversion, DAC output, and threshold comparison in a compact 32-pin package (vs STM32L051K8U6)
- Matches the electrical positioning of the STM32L062K8T6 ordering code (vs STM32L062K8T6)
Design Notes
Use the official STM32L062x8 package drawing and pin table to create the UFQFPN land pattern. Place the required supply capacitors adjacent to their associated pins, connect the exposed pad to the ground plane according to the manufacturer’s layout guidance, and avoid placing high-current or noisy analog sources beneath the MCU. A compact package provides little room for routing errors, so verify the PCB stack-up, footprint dimensions, solder mask, and copper balance before releasing artwork.
Route USB D+ and D- as a short, tightly coupled pair with a continuous ground reference and manufacturer-recommended controlled impedance. Avoid adding test pads, sharp plane splits, or unnecessary stubs that can degrade the differential signal. Crystal-less USB operation does not remove the need for careful connector, protection, and return-path design. Validate the completed board for USB enumeration and compliance using the intended host, cable, enclosure, and operating environment.
Calculate the average current from the MCU, analog circuitry, pull networks, USB PHY load, and external sensors instead of using the processor current in isolation. Enter the lowest usable sleep mode when the application permits, disable unused peripherals, and account for wake-up intervals and periodic ADC activity. Estimated: with a 3.3 V rail, a 1 mA average load corresponds to 3.3 mW, so a 220 mAh battery provides approximately 66.8 mAh-equivalent runtime before conversion, self-discharge, regulator losses, and external loads are included.
Keep analog inputs, the ADC reference path, and sensitive comparator connections away from USB traces, digital return currents, and switching nodes. Use a quiet ground strategy if mixed-signal routing is unavoidable, and follow the datasheet’s analog and power-supply application schematics for component placement. The ADC’s 12-bit resolution and hardware oversampling do not remove the need for stable references, adequate acquisition time, and controlled source impedance.
Do not treat a same-footprint device as a complete replacement without reviewing peripheral availability and firmware. The STM32L062K8U6’s defining combination includes crystal-less USB 2.0 and AES, while alternatives in the STM32L0 family may omit one or both features. Check startup code, peripheral interrupt assignments, clock trees, bootloader behavior, and development-tool support. For PCB reuse, compare every pin in the manufacturer package diagrams rather than relying only on the package dimensions.
Compliance Information
Compliance attributes were not stated in the manufacturer page or datasheet excerpts available for this product.