STMicroelectronics

STM32L062K8U6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics

MPN: STM32L062K8U6 ✓ Nakahanda
32-pin UFQFPN (5 x 5 mm) Package 32 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

STM32L062K8U6 Ulas

STMicroelectronics STM32L062K8U6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller rated to 32 MHz, with 64 KB of Flash memory, USB 2.0 connectivity, AES hardware acceleration, and a 32-pin 5 x 5 mm UFQFPN package. It is designed for compact, energy-conscious embedded systems that need flexible analog conversion, secure data handling, and low-power operation.

An ultra-low-power microcontroller is a semiconductor device that combines a processor core, memory, peripherals, and low-power control functions on one integrated circuit. The STM32L0 family belongs to the Arm Cortex-M microcontroller hierarchy and targets applications where battery life, standby consumption, and compactness are more important than maximum processing throughput. The STM32L062K8U6 adds USB connectivity and AES acceleration to that low-power platform.

Key features include a 32 MHz Arm Cortex-M0+ core, 64 KB (64K x 8) Flash memory, one 12-bit ADC with hardware oversampling, one DAC, two ultra-low-power comparators, and hardware AES. The device also includes one RTC, one LPTIM, three general-purpose 16-bit timers, one basic timer, SysTick, two watchdogs, and USB 2.0 crystal-less connectivity. These resources support sensor acquisition, low-speed data logging, secure accessory control, and compact user-interface systems.

The STM32L062x8 architecture combines an ultra-low-power core with a broad set of analog and timing resources. Its 12-bit ADC supports oversampling, allowing designers to improve effective input resolution and reduce quantization noise when the source impedance and acquisition time permit. AES hardware accelerates encryption and decryption operations, reducing processor workload compared with a software-only cryptographic implementation. Multiple timers and the RTC support periodic sampling, motor or load timing, and calendar-based scheduling.

Typical applications include USB-connected low-power sensors, compact industrial transducers, secure meter interfaces, battery-operated accessories, and embedded control modules. The 32-pin UFQFPN package is useful when board area is constrained, while its exposed-pad construction supports improved heat transfer when the PCB provides adequate copper.

When laying out the board, place decoupling capacitors close to the supply pins and preserve clean grounding around the exposed thermal pad. USB signal routing requires controlled impedance and a short connection to the connector. Firmware migration should also be reviewed because variants within the STM32L0 family can differ in USB, AES, memory size, and low-power features.

This product page organizes the principal electrical, memory, connectivity, analog, and packaging characteristics of the STM32L062K8U6. It also adds practical design guidance, package-focused comparison information, and sourcing answers for engineers planning a PCB, firmware migration, or production BOM.

Mga alternatibo na pwedeng ilagay na STM32L062K8U6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok STM32L062K8U6 (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, Architecture, Basic Timer, DAC.

STMicroelectronics
Package: 32-pin UFQFPN, 5 x 5 mm
Product Type: Ultra-low-power 32-bit microcontroller
Basic Timer: 1 timer
Ikabit sa STM32L062K8U6 →
STMicroelectronics
Package: 32-LQFP (7 x 7 mm)
Product Type: 32-bit ultra-low-power Arm Cortex-M0+ microcontroller
Architecture: Arm Cortex-M0+
Ikabit sa STM32L062K8U6 →

STM32L052K8U6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
STMicroelectronics
📦 32-pin UFQFPN (5 x 5 mm)
Ultra-low-power 32-bit microcontroller · Arm Cortex-M0+ · 32 MHz · 32-bit · 64 KB (64K x 8) · USB 2.0 crystal-less · 1 x 12-bit ADC with hardware oversampling · 1 channel

Magkontak para sa presyo

Tingnan ang Datasheet →

STM32L061K8U6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 32-pin UFQFPN (5 x 5 mm)
CPU remains 32 MHz and Flash remains 64 KB, but USB and AES feature availability differ from the target device

📋 Alternatibo na Reference (hindi sa katalogo)

STM32L051K8U6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 32-pin UFQFPN (5 x 5 mm)
CPU remains 32 MHz and Flash remains 64 KB, but the target device adds USB 2.0 and AES capabilities that are absent from this alternative

📋 Alternatibo na Reference (hindi sa katalogo)

STM32L062K8T6

✅ Drop-In
STMicroelectronics
📦 32-pin UFQFPN (5 x 5 mm)
32-bit ultra-low-power Arm Cortex-M0+ microcontroller · 32 MHz · 64 KB (64K x 8) · Arm Cortex-M0+ · 32 bit · USB 2.0 crystal-less · AES · 32-LQFP (7 x 7 mm)

Magkontak para sa presyo

Tingnan ang Datasheet →

STM32L062K8U6

✅ Drop-In
STMicroelectronics
📦 32-pin UFQFPN (5 x 5 mm)
Ultra-low-power 32-bit Arm Cortex-M0+ microcontroller · 32 MHz · 64 KB (64K x 8) · Arm Cortex-M0+ · 32-bit · USB 2.0 crystal-less · 12-bit

Magkontak para sa presyo

Tingnan ang Datasheet →

STM32L062K8U6 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Ultra-low-power 32-bit Arm Cortex-M0+ microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 64 KB (64K x 8)
CPU Core Arm Cortex-M0+
Architecture 32-bit
USB Version USB 2.0 crystal-less
ADC Resolution 12-bit
ADC Oversampling Supported
DAC 1 DAC
Comparators 2 ultra-low-power comparators
General-Purpose Timers 3 x 16-bit
Low-Power Timer 1 LPTIM
Basic Timer 1
RTC 1
Watchdogs 2
Hardware Encryption AES
SysTick 1
Packhaging 32-pin UFQFPN (5 x 5 mm)
Uri ng Pagpapasok Surface mount
Exposed Thermal Pad Present

Gabay sa Pin Configuration ng STM32L062K8U6 32-pin ufqfpn (5 x 5 mm)

Pin configuration para sa STM32L062K8U6 (32-pin ufqfpn (5 x 5 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 32-pin ufqfpn (5 x 5 mm) package para sa STM32L062K8U6

Wala ng detalyadong pinout data na magagamit para sa STM32L062K8U6.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

STM32L062K8U6 ay nararapat para sa 6 aplikasyons: USB-connected low-power sensor nodes, Battery-powered industrial transducers, Secure USB accessories and dongles, Precision analog measurement systems, Low-energy data loggers, Battery-operated access-control terminals.

🧩

USB-connected low-power sensor nodes

The STM32L062K8U6 fits compact USB sensor nodes because it combines crystal-less USB 2.0 connectivity with a 12-bit ADC that supports hardware oversampling. A sensor conditioned to the MCU’s analog input range can be sampled while the Cortex-M0+ core handles configuration, filtering, and data framing. Its 64 KB Flash provides room for USB firmware, calibration data, and application logic. The trade-off is that USB activity and frequent conversions increase current consumption, so developers should use the STM32L0 low-power modes between measurement events and select external components according to the required sampling rate.

🏭

Battery-powered industrial transducers

The STM32L062K8U6 is appropriate for battery-powered industrial transducers that require local measurement and control in a small enclosure. Two ultra-low-power comparators can monitor thresholds, the 12-bit ADC can acquire sensor signals, and the RTC and LPTIM support scheduled sampling without relying on a separate timing component. Its ultra-low-power STM32L0 architecture helps reduce standby energy, while the 64 KB Flash accommodates acquisition routines and calibration logic. Designers should calculate the complete energy budget from sensor standby current, ADC conversion time, wake frequency, and radio or USB activity rather than considering microcontroller current alone.

🔐

Secure USB accessories and dongles

The STM32L062K8U6 supports secure USB accessories through the combination of USB 2.0 crystal-less connectivity and AES hardware acceleration. Encryption and decryption can be executed in dedicated hardware, reducing processor workload for protected data transfer or device authentication workflows. Its 32 MHz Cortex-M0+ core and 64 KB Flash are sufficient for compact protocol stacks and accessory firmware, while the 32-pin UFQFPN package limits board area. Designers must still define key storage, update procedures, authentication policy, and USB enumeration behavior because hardware acceleration alone does not establish system security.

📟

Precision analog measurement systems

The STM32L062K8U6 is useful for compact precision measurement systems because its 12-bit ADC supports hardware oversampling and its two comparators can perform threshold detection independently of the main CPU. Hardware oversampling can improve effective conversion quality when the input source, acquisition time, and noise conditions are suitable. The DAC also enables stimulus generation or output-reference functions in compact test equipment. The design trade-off is that analog performance depends on source impedance, reference stability, filtering, and PCB layout. Use the manufacturer’s application guidance to size input networks and establish an acquisition strategy appropriate for the required measurement bandwidth.

📱

Low-energy data loggers

The STM32L062K8U6 fits low-energy data loggers that periodically acquire analog values, timestamp events, and transfer records when a host becomes available. The RTC and low-power timer support time-based wake scheduling, while the 64 KB Flash stores firmware and a bounded amount of local data. Its comparator channels can supervise thresholds without continuous CPU polling, and USB 2.0 provides a wired transfer path when required. Designers should evaluate the flash endurance for repeated logging, partition buffers to preserve atomicity, and calculate write energy because frequent flash updates can dominate the battery budget even while the MCU itself operates at low power.

🛡️

Battery-operated access-control terminals

The STM32L062K8U6 can support compact battery-operated access-control terminals that read an input, evaluate a credential, and report activity through USB or a local interface. AES hardware acceleration benefits designs that perform authenticated communications, while the low-power STM32L0 platform helps manage energy between user events. The three 16-bit timers and RTC provide deterministic timing for actuator control, polling intervals, and scheduled access windows. The 32-pin UFQFPN package reduces board size, but designers should preserve the USB return path, secure any key material outside the MCU’s general-purpose memory where appropriate, and validate actuator timing under worst-case radio or bus activity.

Buod ng mga Inirekomendang Produkto

STM32L061K8U6 Same-package low-power Cortex-M0+ alternative when USB is not required Ginagamit sa: USB-connected low-power sensor nodes, Secure USB accessories and dongles, Precision analog measurement systems, Battery-operated access-control terminals STM32L052K8U6 STMicroelectronics Ginagamit sa: USB-connected low-power sensor nodes, Battery-powered industrial transducers, Secure USB accessories and dongles, Low-energy data loggers, Battery-operated access-control terminals STM32L051K8U6 Same-package option for designs without USB or AES requirements Ginagamit sa: Battery-powered industrial transducers, Precision analog measurement systems, Low-energy data loggers
What is the STM32L062K8U6?
The STM32L062K8U6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz CPU, 64 KB of Flash, USB 2.0, and AES hardware acceleration. According to the STMicroelectronics STM32L062x8 datasheet, it also includes a 12-bit ADC with hardware oversampling, one DAC, two comparators, multiple timers, an RTC, and two watchdogs. The device is packaged in a 32-pin 5 x 5 mm UFQFPN for compact, low-energy embedded designs.
What are the key specifications of STM32L062K8U6 that engineers should know?
The principal STM32L062K8U6 specifications are a 32 MHz Arm Cortex-M0+ core, 64 KB (64K x 8) Flash, USB 2.0 crystal-less connectivity, and a 32-pin UFQFPN package. The STMicroelectronics datasheet also identifies one 12-bit ADC with hardware oversampling, one DAC, two ultra-low-power comparators, AES, three 16-bit general-purpose timers, one LPTIM, one basic timer, one RTC, SysTick, and two watchdogs. These features make the MCU suitable for compact sensing, control, secure accessory, and low-power data-acquisition products.
Where can I download the STM32L062K8U6 datasheet PDF?
The official STM32L062K8U6 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32l062k8.pdf. The document covers the STM32L062x8 device family and includes the 32-pin UFQFPN variant used by the STM32L062K8U6. For authoritative connection details, use the package pinout and pin-definition sections in that manufacturer document rather than a distributor summary.
Where can I find the STM32L062K8U6 pinout?
The STM32L062K8U6 pinout is found in the package diagram and pin-definition tables of the official STMicroelectronics STM32L062x8 datasheet. The exact ordering code identifies a 32-pin UFQFPN package with an exposed pad. Use the manufacturer’s pin table when assigning power, ground, reset, boot, clocks, USB, analog inputs, and debug signals to PCB nets.
What can replace the STM32L062K8U6?
The closest drop-in choices are same-package STM32L0 devices such as the STM32L052K8U6 and STM32L061K8U6, subject to firmware and peripheral verification. The STM32L052K8U6 retains the 32 MHz Cortex-M0+ core, 64 KB Flash, and USB 2.0 connectivity but does not provide the same complete AES feature set. The STM32L061K8U6 is also a 32 MHz, 64 KB device in the same 32-pin UFQFPN footprint, but USB and AES availability differ. Confirm peripheral, pin, clock, and firmware requirements before substitution.
Is the STM32L062K8U6 the same as the STM32L052K8U6?
No. Both devices use a 32-pin UFQFPN package, run at up to 32 MHz, and provide 64 KB of Flash, but their peripheral sets are not identical. The STM32L062K8U6 includes AES hardware acceleration, while the STM32L052K8U6 is the USB-oriented STM32L0 variant without that target-device AES feature. A board can physically accept the STM32L052K8U6, but designers should verify supported USB behavior, software drivers, and application cryptographic requirements.
STM32L062K8U6 vs STM32L061K8U6: which is better for a USB device?
The STM32L062K8U6 is generally the better choice for a new USB design because it combines USB 2.0 crystal-less connectivity with AES hardware acceleration. The STM32L061K8U6 is a 32 MHz, 64 KB, 32-pin UFQFPN alternative with the same general low-power Cortex-M0+ positioning, but it does not match the target device’s USB and AES feature combination. Firmware, peripheral, and regulatory validation are still required for either device.
When should I choose the STM32L062K8U6 instead of the STM32L052K8U6?
Choose the STM32L062K8U6 when the design requires USB 2.0 crystal-less connectivity together with AES hardware acceleration. The STM32L052K8U6 is more appropriate when USB is required but AES acceleration is not, while retaining the same 32 MHz Cortex-M0+ performance class, 64 KB Flash configuration, and 32-pin UFQFPN footprint. The decisive engineering difference is the target device’s hardware AES block, not package size.
Is the STM32L062K8U6 suitable for low-power sensor applications?
The STM32L062K8U6 is suitable for low-power sensor applications because it belongs to the ultra-low-power STM32L0 family and combines a 12-bit oversampling ADC, two ultra-low-power comparators, an RTC, an LPTIM, and multiple timers in one package. Its 64 KB Flash and USB connectivity also allow a sensor node to collect local measurements and exchange data. Final battery-life calculations should use the selected sleep mode, peripheral activity, and actual operating conditions.
Where can I buy STM32L062K8U6 online?
Use the Request a Quote form on this page to request STM32L062K8U6 availability, current commercial terms, and a lead-time quotation. The exact UFQFPN package and ordering suffix should remain unchanged because changing the packing or temperature code can affect assembly and qualification. XAIPART will confirm the required configuration against the manufacturer’s STM32L062K8 ordering information.
What is the price of the STM32L062K8U6?
The current commercial price for STM32L062K8U6 is shown through the Request a Quote form on this page. Request the exact MPN, UFQFPN package configuration, required quantity, and target delivery schedule. Quote requests are preferable to static price figures because component pricing and availability can change with order volume, packaging requirements, and market conditions.
What is the lead time for STM32L062K8U6?
Request the current lead time for STM32L062K8U6 through the Request a Quote form on this page. Include your required quantity, date code preference, and whether the order is for prototype evaluation or production assembly. The manufacturer product page and datasheet define the device configuration, while a quotation provides the current manufacturing and delivery schedule for the requested order.
Is STM32L062K8U6 in stock?
Current inventory for STM32L062K8U6 should be confirmed through the Request a Quote form on this page. State the exact MPN, package, order quantity, and required ship date when requesting availability. Distributor listings may not reflect project-specific allocation, so an inventory confirmation tied to your purchase order is the practical procurement step.
Does the STM32L062K8U6 support USB and AES?
Yes. The STM32L062K8U6 supports crystal-less USB 2.0 connectivity and includes hardware AES acceleration. The STMicroelectronics product page identifies the USB capability, and the STM32L062x8 datasheet lists AES among the device features. These resources are useful for USB-connected accessories and security-sensitive control products, subject to normal firmware, hardware, and application-level validation.
Can the STM32L052K8U6 replace the STM32L062K8U6 on an existing PCB?
The STM32L052K8U6 can serve as a physically compatible 32-pin UFQFPN candidate, but it is not an unconditional functional replacement. Both devices are 32 MHz Cortex-M0+ microcontrollers with 64 KB Flash, while the STM32L062K8U6 adds the AES hardware block. Verify USB behavior, peripheral mapping, clock configuration, bootloader behavior, and firmware dependencies before approving the substitution for production.
What design constraints matter for the STM32L062K8U6 UFQFPN package?
The STM32L062K8U6 requires careful exposed-pad and decoupling layout because it uses a compact 32-pin 5 x 5 mm UFQFPN package. Place the required input and output capacitors near their associated supply pins, provide a continuous ground connection beneath the exposed pad, and use adequate copper area for thermal spreading. USB routing also needs controlled impedance, short escape paths, and a clean return path. Follow the manufacturer’s package and hardware-design guidance for final land patterns.

Impormasyon ng Talumpati sa Engineering for STM32L062K8U6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the STM32L062K8U6 when a compact 5 x 5 mm UFQFPN design needs the combination of a 32 MHz Arm Cortex-M0+ core, 64 KB Flash, crystal-less USB 2.0, AES hardware acceleration, and low-power analog peripherals. The STM32L052K8U6 is the closest functional alternative when USB is required but AES is not; its 32 MHz core and 64 KB Flash remain well aligned, so the decision is primarily feature and firmware validation. Consider the STM32L061K8U6 for designs that do not depend on the target device’s USB and AES combination, and the STM32L051K8U6 for simpler local-control products where the extra connectivity and security hardware are unnecessary. The STM32L062K8T6 preserves the target’s electrical class but requires careful package verification. For every proposed substitution, confirm the exact pin definitions, clock setup, peripheral availability, bootloader behavior, tooling support, and qualification requirements.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto STM32L052K8U6 STM32L061K8U6 STM32L051K8U6 STM32L062K8T6 STM32L062K8U6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 32-pin UFQFPN (5 x 5 mm) 32-pin UFQFPN (5 x 5 mm) 32-pin UFQFPN (5 x 5 mm) 32-pin UFQFPN (5 x 5 mm) 32-pin UFQFPN (5 x 5 mm) 32-pin UFQFPN (5 x 5 mm)
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 64 KB 64 KB

Pangunahing mga Pagkakaiba

  • Combines USB connectivity and hardware AES in one low-power Cortex-M0+ device (kumpara saSTM32L052K8U6)
  • Preserves a 64 KB Flash configuration across the principal same-package alternatives (kumpara saSTM32L061K8U6)
  • Combines analog conversion, DAC output, and threshold comparison in a compact 32-pin package (kumpara saSTM32L051K8U6)
  • Matches the electrical positioning of the STM32L062K8T6 ordering code (kumpara saSTM32L062K8T6)

Talaan ng Disenyo

Use the official STM32L062x8 package drawing and pin table to create the UFQFPN land pattern. Place the required supply capacitors adjacent to their associated pins, connect the exposed pad to the ground plane according to the manufacturer’s layout guidance, and avoid placing high-current or noisy analog sources beneath the MCU. A compact package provides little room for routing errors, so verify the PCB stack-up, footprint dimensions, solder mask, and copper balance before releasing artwork.

Route USB D+ and D- as a short, tightly coupled pair with a continuous ground reference and manufacturer-recommended controlled impedance. Avoid adding test pads, sharp plane splits, or unnecessary stubs that can degrade the differential signal. Crystal-less USB operation does not remove the need for careful connector, protection, and return-path design. Validate the completed board for USB enumeration and compliance using the intended host, cable, enclosure, and operating environment.

Calculate the average current from the MCU, analog circuitry, pull networks, USB PHY load, and external sensors instead of using the processor current in isolation. Enter the lowest usable sleep mode when the application permits, disable unused peripherals, and account for wake-up intervals and periodic ADC activity. Estimated: with a 3.3 V rail, a 1 mA average load corresponds to 3.3 mW, so a 220 mAh battery provides approximately 66.8 mAh-equivalent runtime before conversion, self-discharge, regulator losses, and external loads are included.

Keep analog inputs, the ADC reference path, and sensitive comparator connections away from USB traces, digital return currents, and switching nodes. Use a quiet ground strategy if mixed-signal routing is unavoidable, and follow the datasheet’s analog and power-supply application schematics for component placement. The ADC’s 12-bit resolution and hardware oversampling do not remove the need for stable references, adequate acquisition time, and controlled source impedance.

Do not treat a same-footprint device as a complete replacement without reviewing peripheral availability and firmware. The STM32L062K8U6’s defining combination includes crystal-less USB 2.0 and AES, while alternatives in the STM32L0 family may omit one or both features. Check startup code, peripheral interrupt assignments, clock trees, bootloader behavior, and development-tool support. For PCB reuse, compare every pin in the manufacturer package diagrams rather than relying only on the package dimensions.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance attributes were not stated in the manufacturer page or datasheet excerpts available for this product.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

STM32L062K8U6 datasheet STM32L062K8U6 pinout STM32L062K8U6 datasheet pdf STM32L062K8U6 specifications STM32L062K8U6 UFQFPN pinout STM32L062K8U6 equivalent STM32L062K8U6 replacement STM32L062K8U6 vs STM32L052K8U6 STM32L062K8U6 USB AES MCU STM32L062K8U6 price STM32L062K8U6 stock STMicroelectronics STM32L062K8U6 STM32L062K8U6 low power application

Mga kaugnay na Mga Komponente at mga Tuntunin

STMicroelectronics STM32L062K8U6 STM32L062K8 STM32L052K8U6 STM32L061K8U6 STM32L051K8U6 STM32L062K8T6 Arm Cortex-M0+ ultra-low-power microcontroller 32-bit microcontroller embedded microcontroller semiconductor USB 2.0 AES 12-bit ADC hardware oversampling DAC ultra-low-power comparator LPTIM RTC 16-bit timer UFQFPN-32 QFN family surface mount SMD
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ