STMicroelectronics

STM32L151RDT6 - 32MHz Cortex-M3 384KB MCU | STMicroelectronics

MPN: STM32L151RDT6 ✓ Active
1.8 V to 3.6 V Vdss 64-LQFP, 10 x 10 mm Package 32 MHz Speed 384 KB Memory
MOQ: 1 |

STM32L151RDT6 Overview

The STMicroelectronics STM32L151RDT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M3 core, operating at up to 32 MHz with 384 KB of Flash memory in a 64-LQFP 10 x 10 mm package. It combines 48 KB SRAM with USB connectivity, an RTC, LCD drivers, USART, I2C, SPI, timers, a 12-bit ADC, DAC, and comparators. The STM32L151RDT6 is positioned for industrial, medical, consumer, sensor, and connected embedded systems where a compact MCU and a broad peripheral set are valuable.

An ultra-low-power microcontroller is an embedded control device designed to maintain useful processing and peripheral performance while minimizing energy consumption. The STM32L1 family combines an Arm Cortex-M3 processor with low-power operating modes, low-leakage peripherals, and multiple clock sources. Within the product hierarchy, the STM32L151RDT6 is a 32-bit microcontroller, MCU, and embedded processor that supports sensor acquisition, communications, data logging, display control, and compact control-system tasks.

The principal device characteristics include a 32 MHz maximum CPU frequency, 384 KB of Flash, 48 KB of SRAM, and an additional 12 KB of data memory described for this family. Its integrated connectivity includes USB 2.0, USART, I2C, and SPI interfaces, while the analog and timing resources include a 12-bit ADC, DAC, comparators, timers, an RTC, and LCD drive capability. These functions reduce the need for external components in systems that combine measurement, communications, and local user-interface functions.

The STM32L151RD device family is based on the Arm Cortex-M3 architecture and provides multiple peripheral resources for energy-conscious embedded designs. A 12-bit ADC supports analog measurement, while DAC and comparator functions can simplify signal generation, threshold detection, and monitoring. USB connectivity is useful for configuration, data transfer, and firmware update workflows when the system needs a wired interface rather than a wireless protocol.

Typical applications include industrial sensor nodes, medical monitoring equipment, USB-connected data loggers, battery-powered instrumentation, display controllers, and compact automation products. The 64-LQFP package also provides enough I/O for external memories, communication transceivers, sensors, and human-interface peripherals without requiring a very fine-pitch BGA footprint. STMicroelectronics lists the STM32L151RD family as an active ultra-low-power MCU product line.

Designers should confirm the exact pin functions, power-supply limits, decoupling requirements, clock configuration, and peripheral operating conditions in the manufacturer datasheet before layout release. The LQFP package has exposed leads that simplify inspection and rework, but its 0.5 mm pitch requires careful board design. Firmware should also use the correct device identifiers, memory definitions, startup code, and peripheral initialization sequence for the STM32L151RD variant.

This product page combines manufacturer product information, structured technical attributes, package guidance, replacement analysis, and practical application guidance. It helps engineers identify where the STM32L151RDT6 fits, distinguish closely related STM32L151 and STM32L152 variants, and plan sourcing through the Request a Quote workflow.

Drop-in alternatives for STM32L151RDT6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with STM32L151RDT6 (same form factor and footprint) — differing in Analog Peripherals, Flash Memory, Package.

STMicroelectronics
Analog Peripherals: 3x op-amp
Flash Memory: 256 KB
Package: 64-LQFP (10x10 mm)
Compare with STM32L151RDT6 →

STM32L152RDT6

✅ Drop-In
📦 64-LQFP (10x10 mm)
Same 32 MHz Cortex-M3 platform and 64-LQFP footprint; adds STM32L152 hardware security capability while retaining 384 KB Flash and 48 KB SRAM.

📋 Reference alternative (not in catalog)

STM32L151RET6

✅ Drop-In ⚠️ Specs Unverified
📦 64-LQFP (10x10 mm)
Same 32 MHz Cortex-M3 core and 64-LQFP footprint; Flash increases from 384 KB to 512 KB, a 33.3% increase requiring firmware and memory-map review.

📋 Reference alternative (not in catalog)

STM32L151RCT6

✅ Drop-In ⚠️ Specs Unverified
STMicroelectronics
📦 64-LQFP (10x10 mm)
ARM Cortex-M3 32-bit · 32 MHz · 256 KB · 32 KB · 1.65 V to 3.6 V · USB 2.0 full-speed device · 3x op-amp · 5 (Sleep, Low-power Run, Low-power Sleep, Stop, Standby)

Contact for price

View Datasheet →

STM32L151RBT6

✅ Drop-In ⚠️ Specs Unverified
📦 64-LQFP (10x10 mm)
Same 32 MHz Cortex-M3 core and 64-LQFP footprint; Flash decreases from 384 KB to 128 KB, a 66.7% reduction, so code capacity must be validated.

📋 Reference alternative (not in catalog)

STM32L152RET6

✅ Drop-In ⚠️ Specs Unverified
📦 64-LQFP (10x10 mm)
Same 32 MHz Cortex-M3 platform and 64-LQFP footprint with STM32L152 security features; Flash increases from 384 KB to 512 KB, a 33.3% increase.

📋 Reference alternative (not in catalog)

STM32L151RDT6 Maximum Ratings & Electrical Characteristics

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M3
Architecture 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 384 KB
SRAM 48 KB
Additional Data Memory 12 KB
Package 64-LQFP, 10 x 10 mm
Operating Supply Range 1.8 V to 3.6 V
USB Interface USB 2.0
Serial Interfaces USART, I2C, and SPI
ADC Resolution 12-bit
Analog Peripherals ADC, DAC, and comparators
Timing Peripherals Timers and real-time clock
Display Support LCD driver
Mounting Type Surface mount
Lifecycle Stage Active

STM32L151RDT6 64-lqfp, 10 x 10 mm Pin Configuration Guide

Pin configuration for STM32L151RDT6 (64-lqfp, 10 x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

64-lqfp, 10 x 10 mm package pinout diagram for STM32L151RDT6

No detailed pinout data available for STM32L151RDT6.

Refer to the datasheet for full pin configuration.

Typical Applications

STM32L151RDT6 is suitable for 6 applications: Industrial Sensor Node, USB Data Logger, Medical Monitoring Instrument, Battery-Powered Field Instrument, USB Connected Control Panel, Low-Power Environmental Monitor.

🏭

Industrial Sensor Node

The STM32L151RDT6 fits industrial sensor nodes because its 32 MHz Arm Cortex-M3 core can process measurements while its low-power STM32L1 architecture supports duty-cycled operation. The 12-bit ADC handles analog sensor inputs, and I2C or SPI connects digital sensors, transceivers, or memory. USB 2.0 provides a convenient configuration and data-transfer path for bench commissioning, while USART supports local diagnostics. The 64-LQFP 10 x 10 mm package provides 64 leads for power, grounds, communications, and discrete sensor interfaces. Engineers should calculate the average current from the active and sleep-mode operating points, confirm the ADC sampling requirements, and reserve local decoupling close to each supply pin.

🖥️

USB Data Logger

The STM32L151RDT6 is well suited to a USB data logger because it combines a 32 MHz Cortex-M3 processor, 384 KB of Flash, 48 KB of SRAM, and USB 2.0 in one 64-LQFP device. Firmware can sample analog inputs with the 12-bit ADC, store records in external nonvolatile memory through SPI or I2C, timestamp events with the RTC, and expose the collected data over USB. The DAC can support stimulus generation or output referencing where required. Compared with a discrete USB interface implementation, integrating USB reduces board area and component count. Designers should use the manufacturer clock and USB implementation guidance, provide the required bus-routing geometry, and verify enumeration behavior across the intended host operating systems.

💊

Medical Monitoring Instrument

The STM32L151RDT6 can serve as the central controller in a compact medical monitoring instrument when the required safety, isolation, and regulatory controls are implemented at the system level. Its 12-bit ADC supports front-end signal acquisition, comparators can perform fast threshold decisions, and the RTC provides time references for recorded measurements. USART, I2C, SPI, and USB allow integration with sensors, display electronics, and service ports. The 32 MHz Cortex-M3 core has ample capacity for control, filtering, and communications. The LQFP package is practical for serviceable industrial electronics and automated assembly. Engineers must verify the exact temperature grade, analog accuracy, isolation architecture, creepage, and medical-device requirements before using the MCU in a clinical design.

⚡

Battery-Powered Field Instrument

The STM32L151RDT6 is appropriate for battery-powered field instruments because the STM32L1 platform is designed around low active and standby power operation. A 32 MHz Cortex-M3 core can perform local computation, while the RTC and timers can schedule measurements between extended sleep intervals. The ADC measures sensor signals, the DAC can generate references or test stimuli, and serial interfaces connect radios, displays, and storage. The 64-LQFP footprint is large enough to expose useful communications and control I/O while remaining compatible with conventional pick-and-place assembly. Battery-life calculations should include regulator quiescent current, sensor duty cycle, USB attachment, and self-heating rather than relying only on the MCU's nominal active current.

🎛️

USB Connected Control Panel

The STM32L151RDT6 can implement a USB connected control panel for equipment requiring local buttons, indicators, displays, and host communication. The integrated USB 2.0 interface reduces external connectivity hardware, while the 12-bit ADC, DAC, and comparators support signal conditioning and control loops. Timers provide deterministic switching or sampling functions, and USART, I2C, and SPI support downstream sensors and actuators. The 64-LQFP package provides ample pins for panel inputs, display connections, and external interfaces. A practical design uses the manufacturer pin-definition table to select alternate functions, isolates analog inputs from fast digital routes, and validates USB signal integrity with the recommended board geometry. Firmware should also implement safe output states before enumeration and after a host connection is lost.

🌐

Low-Power Environmental Monitor

The STM32L151RDT6 supports environmental monitoring systems that periodically sample temperature, humidity, gas, or light sensors and transmit the results over a serial or USB link. Its ultra-low-power family positioning reduces the controller's contribution to standby energy, while the 384 KB of Flash provides room for calibration tables, data filters, and communication protocols. The 12-bit ADC supports analog channels, I2C and SPI accommodate common sensor buses, and the RTC timestamps samples across long intervals. The 10 x 10 mm LQFP package also leaves room for power regulation and radio or wired communication hardware. Designers should confirm ADC accuracy at the selected reference voltage, apply sensor-specific averaging to reduce noise, and use low-leakage external components when standby performance is critical.

Recommended Products Summary

STM32L151RDT6 STMicroelectronics Used in: Industrial Sensor Node, USB Data Logger, Medical Monitoring Instrument, Battery-Powered Field Instrument, USB Connected Control Panel, Low-Power Environmental Monitor STM32L152RDT6 Related controller with additional security capability Used in: Industrial Sensor Node, USB Data Logger, Medical Monitoring Instrument, Battery-Powered Field Instrument, USB Connected Control Panel, Low-Power Environmental Monitor
What is the STM32L151RDT6?
The STM32L151RDT6 is an ultra-low-power 32-bit Arm Cortex-M3 microcontroller from STMicroelectronics. According to the manufacturer product page, the STM32L151RD family operates at up to 32 MHz and provides USB 2.0 connectivity, an RTC, LCD drivers, USART, I2C, SPI, timers, a 12-bit ADC, a DAC, and comparators. The exact target variant includes 384 KB of Flash, 48 KB of SRAM, and a 64-LQFP 10 x 10 mm package.
What are the key specifications of STM32L151RDT6 that engineers should know?
The STM32L151RDT6 combines a 32 MHz Arm Cortex-M3 core with 384 KB of Flash, 48 KB of SRAM, and 12 KB of additional data memory in a 64-LQFP 10 x 10 mm package. According to the STMicroelectronics STM32L151/152 product information, the family also includes USB 2.0, an RTC, LCD drive capability, USART, I2C, SPI, timers, a 12-bit ADC, DAC, and comparators. These resources make it suitable for connected sensing, monitoring, logging, and compact control systems.
Where can I download the STM32L151RDT6 datasheet PDF?
Download the STM32L151RDT6 technical documentation from the official STMicroelectronics STM32L151RD product page. The page provides the manufacturer datasheet, reference documents, and product resources for the STM32L151xD and STM32L152xD families. Use the pin-definition table and electrical-characteristics sections when assigning the 64 LQFP pins, selecting bypass capacitors, checking clock limits, and confirming operating conditions.
Where can I find the STM32L151RDT6 pinout?
The STM32L151RDT6 pinout is documented in the pin-definition section of the manufacturer datasheet for the STM32L151xD family. Because this is a 64-pin LQFP, verify all 64 terminal assignments, power pins, ground pins, analog inputs, debug signals, and alternate-function mappings against the exact RDT6 ordering code before routing the PCB. The official STM32L151RD product page is the appropriate starting point for those documents.
Is the STM32L151RDT6 suitable for low-power sensor applications?
Yes, the STM32L151RDT6 is suitable for low-power sensor applications because it belongs to STMicroelectronics' ultra-low-power STM32L1 family and combines an Arm Cortex-M3 core with energy-conscious peripherals. Its 12-bit ADC supports analog sensing, while I2C and SPI connect external sensors. The RTC, timers, and USB connectivity also enable periodic data capture, local timestamping, configuration, and data transfer in compact instrumentation.
STM32L151RDT6 vs STM32L152RDT6: which is better for a USB design?
The STM32L152RDT6 is the closer choice when a design specifically needs the additional hardware security capability of the STM32L152 family; both parts otherwise use the STM32L15 low-power platform, 32 MHz Cortex-M3 architecture, and 64-LQFP package family. According to STMicroelectronics product information, the STM32L152 line complements the STM32L151 line with enhanced connectivity and security-oriented options. Confirm peripheral availability and software-device support for the exact project before finalizing the selection.
What is the best drop-in replacement for STM32L151RDT6?
The closest same-footprint replacement is generally a member of the STM32L151RD family with the required flash, SRAM, temperature grade, and package configuration, such as STM32L151RDT6-compatible ordering variants. The STM32L152RDT6 also uses the same 64-LQFP family but changes security functionality and device software, so it is not automatically interchangeable. A replacement must be checked against the complete pin definition, memory map, clock setup, bootloader, and peripheral requirements.
What can replace STM32L151RDT6 without changing the PCB?
A PCB-compatible replacement must use the same 64-LQFP footprint and provide the required 32 MHz performance, memory configuration, power rails, and peripheral assignments. Closely related STM32L151 and STM32L152 RD-family devices can share the mechanical footprint, but changing memory size or security features may require different startup code, linker configuration, or firmware support. Use the manufacturer pin table and device identifier as the acceptance criteria rather than relying on package name alone.
Is STM32L151RDT6 the same as STM32L152RDT6?
No, STM32L151RDT6 and STM32L152RDT6 are related but not identical devices. Both belong to the STM32L15 ultra-low-power family and use a 64-LQFP package, while the STM32L152 family adds hardware security capability and may use different device identifiers and firmware configurations. According to STMicroelectronics product information, the STM32L151/152 lines also differ in their security and peripheral mix, so firmware and board-level validation are required.
When should I choose STM32L151RDT6 over STM32L152RDT6?
Choose STM32L151RDT6 when the design needs low-power Cortex-M3 processing, 384 KB of Flash, USB connectivity, mixed serial interfaces, and analog peripherals but does not require the additional hardware security capabilities associated with STM32L152. Choose STM32L152RDT6 when security-focused hardware functions justify the different device family and software configuration. Both use the same 64-LQFP class, making either a candidate when board area is constrained.
Is STM32L151RDT6 suitable for industrial and medical embedded systems?
The STM32L151RDT6 can fit industrial and medical embedded systems when the device's specified electrical limits, temperature grade, isolation requirements, and regulatory obligations are satisfied. Its low-power architecture, 12-bit ADC, RTC, USB, and serial interfaces support sensor monitoring, laboratory instruments, connected medical accessories, and industrial data loggers. The manufacturer datasheet remains the controlling source for operating temperature, EMC behavior, and application-specific compliance.
What is the lead time for STM32L151RDT6?
Current lead time, allocation, and order quantity should be requested through the Request a Quote form on this page. STMicroelectronics identifies the STM32L151RD family as active, and the product is offered through multiple supply channels. Because availability changes by region, quantity, and date, request the current factory schedule and authorized-channel options rather than relying on a historical stock count.
Where can I buy STM32L151RDT6 online?
Use the Request a Quote form on this page to request STM32L151RDT6 pricing, current stock, lead time, and order fulfillment options. The form is the appropriate route for quote-based and multi-quantity procurement and can clarify the exact LQFP ordering code. Confirm that any quoted line includes STM32L151RDT6 rather than a related RD-family device with different memory, temperature, or packing characteristics.
What is the price of STM32L151RDT6?
The current unit price for STM32L151RDT6 is obtained through the Request a Quote form on this page. Pricing depends on order quantity, current factory availability, packing choice, and market conditions. Submit the required quantity and target delivery information with the request so the commercial team can return a current quotation for the exact STM32L151RDT6 ordering code.
Is STM32L151RDT6 in stock?
Stock availability for STM32L151RDT6 should be confirmed through the Request a Quote form on this page because inventory changes continuously. The manufacturer lists the STM32L151RD family as active, and the part has an established catalog footprint. Provide the required quantity, delivery date, and acceptable packing method when requesting current availability and factory lead time.
What is the best GigaDevice equivalent for STM32L151RDT6?
No GigaDevice equivalent can be confirmed as a drop-in replacement for STM32L151RDT6 from the available cross-reference information. The STM32L151RDT6 requires a 64-LQFP footprint, up to 32 MHz operation, 384 KB of Flash, 48 KB of SRAM, and a particular mix of USB, ADC, DAC, RTC, and serial peripherals. Treat any cross-manufacturer candidate as a redesign unless its complete pinout, electrical limits, bootloader, and firmware compatibility are independently validated.

Engineering reference data for STM32L151RDT6 — comparison, design guidance, and compliance information.

Selection Guide

Choose STM32L151RDT6 when the design needs an ultra-low-power 32 MHz Cortex-M3 controller with USB, 384 KB of Flash, 48 KB of SRAM, a 12-bit ADC, DAC, RTC, and several serial interfaces in a 64-LQFP package. Choose STM32L152RDT6 when the same footprint and memory class are needed but the STM32L152 family's hardware security capability is valuable; firmware and device-support differences must still be handled. Choose STM32L151RET6 or STM32L152RET6 when additional Flash is useful, accepting a larger memory configuration and related software changes. Choose STM32L151RCT6 when 256 KB of Flash is sufficient, or STM32L151RBT6 when code size can be reduced enough to fit 128 KB. Because a shared footprint does not guarantee identical behavior, validate the exact ordering code, pin assignments, peripheral map, clock setup, and application firmware before releasing a replacement to production.

Comparison with Alternatives

Parameter This Product STM32L152RDT6 STM32L151RET6 STM32L151RCT6 STM32L151RBT6 STM32L152RET6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm)
Processor Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 384 KB 384 KB 512 KB 256 KB 128 KB 512 KB
Security Family Feature STM32L1 base feature set STM32L152 hardware security capability STM32L151 base feature set STM32L151 base feature set STM32L151 base feature set STM32L152 hardware security capability

Key Differentiators

  • Combines low-power Cortex-M3 control with integrated USB (vs STM32L151RBT6)
  • Provides a security-focused same-package upgrade path (vs STM32L152RDT6)
  • Substantial memory headroom within the same 64-LQFP footprint (vs STM32L151RCT6)

Design Notes

Validate the complete power budget rather than only the 32 MHz operating condition. The STM32L151RDT6 supports low-power operation, but battery life also depends on analog-reference settings, sleep modes, USB attachment, external regulator quiescent current, and sensor duty cycles. Use the manufacturer's clock-tree and low-power-mode guidance, maintain local supply decoupling, and ensure every rail remains within the electrical limits for the selected temperature grade.

Assign all 64 LQFP terminals from the exact manufacturer pin-definition table rather than from a generic STM32 symbol. Route USB D+ and D- as a controlled differential pair, provide the specified source-series resistance where required, and keep analog inputs away from switching nodes and high-current return paths. Place bypass capacitors close to the associated supply pins and provide a low-impedance ground return for the ADC and DAC sections.

Do not treat a shared STM32L151 or STM32L152 footprint as proof that firmware and hardware are interchangeable. Confirm the device identifier, flash size, SRAM configuration, peripheral set, security features, clock limits, and temperature grade. After substitution, rebuild the linker configuration and startup image, retest USB enumeration and analog accuracy, and verify every exposed pin against the replacement part's datasheet.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer product information confirms an active product family and lists USB, RTC, LCD, USART, I2C, SPI, timer, ADC, DAC, and comparator resources. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

STM32L151RDT6 datasheet STM32L151RDT6 pinout STM32L151RDT6 datasheet pdf STM32L151RDT6 equivalent STM32L151RDT6 replacement STM32L151RDT6 cross reference STM32L151RDT6 footprint STM32L151RDT6 price STM32L151RDT6 stock STMicroelectronics STM32L151RDT6 STM32L151RDT6 vs STM32L152RDT6 STM32L151 64-LQFP pinout STM32L151RDT6 low power sensor application STM32L151RDT6 USB data logger STM32L151RDT6 schematic

Related Components & Terms

STMicroelectronics STM32L151RDT6 STM32L151RD STM32L151 STM32L152 STM32L152RDT6 STM32L151RET6 STM32L151RCT6 STM32L151RBT6 STM32L152RET6 Arm Cortex-M3 32-bit microcontroller MCU ultra-low-power microcontroller embedded processor USB 2.0 USART I2C SPI 12-bit ADC DAC RTC LCD driver 64-LQFP LQFP package family surface-mount technology low-power mode flash memory SRAM RoHS REACH AEC-Q100
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details