STM32L151RDT6 - 32MHz Cortex-M3 384KB MCU | STMicroelectronics
N.º da peça: STM32L151RDT6 ✓ AtivoSTM32L151RDT6 Visão geral
An ultra-low-power microcontroller is an embedded control device designed to maintain useful processing and peripheral performance while minimizing energy consumption. The STM32L1 family combines an Arm Cortex-M3 processor with low-power operating modes, low-leakage peripherals, and multiple clock sources. Within the product hierarchy, the STM32L151RDT6 is a 32-bit microcontroller, MCU, and embedded processor that supports sensor acquisition, communications, data logging, display control, and compact control-system tasks.
The principal device characteristics include a 32 MHz maximum CPU frequency, 384 KB of Flash, 48 KB of SRAM, and an additional 12 KB of data memory described for this family. Its integrated connectivity includes USB 2.0, USART, I2C, and SPI interfaces, while the analog and timing resources include a 12-bit ADC, DAC, comparators, timers, an RTC, and LCD drive capability. These functions reduce the need for external components in systems that combine measurement, communications, and local user-interface functions.
The STM32L151RD device family is based on the Arm Cortex-M3 architecture and provides multiple peripheral resources for energy-conscious embedded designs. A 12-bit ADC supports analog measurement, while DAC and comparator functions can simplify signal generation, threshold detection, and monitoring. USB connectivity is useful for configuration, data transfer, and firmware update workflows when the system needs a wired interface rather than a wireless protocol.
Typical applications include industrial sensor nodes, medical monitoring equipment, USB-connected data loggers, battery-powered instrumentation, display controllers, and compact automation products. The 64-LQFP package also provides enough I/O for external memories, communication transceivers, sensors, and human-interface peripherals without requiring a very fine-pitch BGA footprint. STMicroelectronics lists the STM32L151RD family as an active ultra-low-power MCU product line.
Designers should confirm the exact pin functions, power-supply limits, decoupling requirements, clock configuration, and peripheral operating conditions in the manufacturer datasheet before layout release. The LQFP package has exposed leads that simplify inspection and rework, but its 0.5 mm pitch requires careful board design. Firmware should also use the correct device identifiers, memory definitions, startup code, and peripheral initialization sequence for the STM32L151RD variant.
This product page combines manufacturer product information, structured technical attributes, package guidance, replacement analysis, and practical application guidance. It helps engineers identify where the STM32L151RDT6 fits, distinguish closely related STM32L151 and STM32L152 variants, and plan sourcing through the Request a Quote workflow.
Alternativas drop-in para STM32L151RDT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32L151RDT6 (mesmo formato e footprint) — diferindo em Analog Peripherals, Flash Memory, Package.
STM32L152RDT6
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32L151RET6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L151RCT6
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →STM32L151RBT6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L152RET6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L151RDT6 Classificações máximas e características elétricas
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M3 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 384 KB |
| SRAM | 48 KB |
| Additional Data Memory | 12 KB |
| Encapsulamento | 64-LQFP, 10 x 10 mm |
| Operating Supply Range | 1.8 V to 3.6 V |
| USB Interface | USB 2.0 |
| Serial Interfaces | USART, I2C, and SPI |
| ADC Resolution | 12-bit |
| Analog Peripherals | ADC, DAC, and comparators |
| Timing Peripherals | Timers and real-time clock |
| Display Support | LCD driver |
| Tipo de montagem | Surface mount |
| Lifecycle Stage | Active |
Guia de Configuração de Pinos do STM32L151RDT6 64-lqfp, 10 x 10 mm
Configuração de pinos para STM32L151RDT6 (pacote 64-lqfp, 10 x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32L151RDT6.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32L151RDT6 é adequado para 6 aplicaçãos: Industrial Sensor Node, USB Data Logger, Medical Monitoring Instrument, Battery-Powered Field Instrument, USB Connected Control Panel, Low-Power Environmental Monitor.
Industrial Sensor Node
The STM32L151RDT6 fits industrial sensor nodes because its 32 MHz Arm Cortex-M3 core can process measurements while its low-power STM32L1 architecture supports duty-cycled operation. The 12-bit ADC handles analog sensor inputs, and I2C or SPI connects digital sensors, transceivers, or memory. USB 2.0 provides a convenient configuration and data-transfer path for bench commissioning, while USART supports local diagnostics. The 64-LQFP 10 x 10 mm package provides 64 leads for power, grounds, communications, and discrete sensor interfaces. Engineers should calculate the average current from the active and sleep-mode operating points, confirm the ADC sampling requirements, and reserve local decoupling close to each supply pin.
Recomendado
USB Data Logger
The STM32L151RDT6 is well suited to a USB data logger because it combines a 32 MHz Cortex-M3 processor, 384 KB of Flash, 48 KB of SRAM, and USB 2.0 in one 64-LQFP device. Firmware can sample analog inputs with the 12-bit ADC, store records in external nonvolatile memory through SPI or I2C, timestamp events with the RTC, and expose the collected data over USB. The DAC can support stimulus generation or output referencing where required. Compared with a discrete USB interface implementation, integrating USB reduces board area and component count. Designers should use the manufacturer clock and USB implementation guidance, provide the required bus-routing geometry, and verify enumeration behavior across the intended host operating systems.
Recomendado
Medical Monitoring Instrument
The STM32L151RDT6 can serve as the central controller in a compact medical monitoring instrument when the required safety, isolation, and regulatory controls are implemented at the system level. Its 12-bit ADC supports front-end signal acquisition, comparators can perform fast threshold decisions, and the RTC provides time references for recorded measurements. USART, I2C, SPI, and USB allow integration with sensors, display electronics, and service ports. The 32 MHz Cortex-M3 core has ample capacity for control, filtering, and communications. The LQFP package is practical for serviceable industrial electronics and automated assembly. Engineers must verify the exact temperature grade, analog accuracy, isolation architecture, creepage, and medical-device requirements before using the MCU in a clinical design.
Recomendado
Battery-Powered Field Instrument
The STM32L151RDT6 is appropriate for battery-powered field instruments because the STM32L1 platform is designed around low active and standby power operation. A 32 MHz Cortex-M3 core can perform local computation, while the RTC and timers can schedule measurements between extended sleep intervals. The ADC measures sensor signals, the DAC can generate references or test stimuli, and serial interfaces connect radios, displays, and storage. The 64-LQFP footprint is large enough to expose useful communications and control I/O while remaining compatible with conventional pick-and-place assembly. Battery-life calculations should include regulator quiescent current, sensor duty cycle, USB attachment, and self-heating rather than relying only on the MCU's nominal active current.
Recomendado
USB Connected Control Panel
The STM32L151RDT6 can implement a USB connected control panel for equipment requiring local buttons, indicators, displays, and host communication. The integrated USB 2.0 interface reduces external connectivity hardware, while the 12-bit ADC, DAC, and comparators support signal conditioning and control loops. Timers provide deterministic switching or sampling functions, and USART, I2C, and SPI support downstream sensors and actuators. The 64-LQFP package provides ample pins for panel inputs, display connections, and external interfaces. A practical design uses the manufacturer pin-definition table to select alternate functions, isolates analog inputs from fast digital routes, and validates USB signal integrity with the recommended board geometry. Firmware should also implement safe output states before enumeration and after a host connection is lost.
Recomendado
Low-Power Environmental Monitor
The STM32L151RDT6 supports environmental monitoring systems that periodically sample temperature, humidity, gas, or light sensors and transmit the results over a serial or USB link. Its ultra-low-power family positioning reduces the controller's contribution to standby energy, while the 384 KB of Flash provides room for calibration tables, data filters, and communication protocols. The 12-bit ADC supports analog channels, I2C and SPI accommodate common sensor buses, and the RTC timestamps samples across long intervals. The 10 x 10 mm LQFP package also leaves room for power regulation and radio or wired communication hardware. Designers should confirm ADC accuracy at the selected reference voltage, apply sensor-specific averaging to reduce noise, and use low-leakage external components when standby performance is critical.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32L151RDT6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32L152RDT6 | STM32L151RET6 | STM32L151RCT6 | STM32L151RBT6 | STM32L152RET6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) |
| Processor Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 384 KB | 384 KB | 512 KB | 256 KB | 128 KB | 512 KB |
| Security Family Feature | STM32L1 base feature set | STM32L152 hardware security capability | STM32L151 base feature set | STM32L151 base feature set | STM32L151 base feature set | STM32L152 hardware security capability |
Principais diferenciais
- Combines low-power Cortex-M3 control with integrated USB (vs STM32L151RBT6)
- Provides a security-focused same-package upgrade path (vs STM32L152RDT6)
- Substantial memory headroom within the same 64-LQFP footprint (vs STM32L151RCT6)
Notas de projeto
Validate the complete power budget rather than only the 32 MHz operating condition. The STM32L151RDT6 supports low-power operation, but battery life also depends on analog-reference settings, sleep modes, USB attachment, external regulator quiescent current, and sensor duty cycles. Use the manufacturer's clock-tree and low-power-mode guidance, maintain local supply decoupling, and ensure every rail remains within the electrical limits for the selected temperature grade.
Assign all 64 LQFP terminals from the exact manufacturer pin-definition table rather than from a generic STM32 symbol. Route USB D+ and D- as a controlled differential pair, provide the specified source-series resistance where required, and keep analog inputs away from switching nodes and high-current return paths. Place bypass capacitors close to the associated supply pins and provide a low-impedance ground return for the ADC and DAC sections.
Do not treat a shared STM32L151 or STM32L152 footprint as proof that firmware and hardware are interchangeable. Confirm the device identifier, flash size, SRAM configuration, peripheral set, security features, clock limits, and temperature grade. After substitution, rebuild the linker configuration and startup image, retest USB enumeration and analog accuracy, and verify every exposed pin against the replacement part's datasheet.
Informações de conformidade
The manufacturer product information confirms an active product family and lists USB, RTC, LCD, USART, I2C, SPI, timer, ADC, DAC, and comparator resources. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.