STMicroelectronics

STM8L152C4T6TR - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics

MPN: STM8L152C4T6TR ✓ Active
2.5 V/3.3 V Vdss 48-LQFP (7 x 7 mm) Package 16 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

STM8L152C4T6TR Overview

The STMicroelectronics STM8L152C4T6TR is an 8-bit ultra-low-power microcontroller with a 16 MHz core, 16 KB of Flash program memory, 2 KB of RAM, and a 48-LQFP 7 x 7 mm package. It belongs to the STM8L EnergyLite family and combines low-power operation with an integrated RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and comparators.

An ultra-low-power microcontroller is an embedded semiconductor designed to execute control and measurement tasks while minimizing energy consumption. The STM8L family hierarchy progresses from MCU to 8-bit microcontroller, ultra-low-power microcontroller, and embedded controller. This positioning makes the STM8L152C4T6TR useful in battery-operated instruments, compact industrial sensors, meter interfaces, and portable equipment where longer standby operation is more important than high computational throughput.

The 16 MHz clock rate provides dedicated processing for protocol handling, timing, data acquisition, and supervisory control. Its 16 KB Flash supports firmware and boot logic, while 2 KB of SRAM accommodates working data and stack requirements. The device supports a 3 V operating supply according to distributor records, while the Arrow listing identifies a 2.5 V/3.3 V configuration. Peripheral integration reduces the need for external components for analog measurements, communications, comparisons, and low-power timekeeping.

The STM8L152C4T6TR also includes two comparators sharing a bias and voltage reference, as described in the STMicroelectronics STM8L151x4/6 and STM8L152x4/6 datasheet. Its internal reference can be selected or overridden through an I/O. These features are useful for threshold detection, sensor conditioning, battery monitoring, and low-power control loops. The LCD interface and RTC are particularly valuable in metering systems that must retain time and present information while consuming minimal power.

Typical uses include compact energy meters, industrial sensor nodes, wearable accessories, low-power instrument panels, security and access peripherals, and battery-powered remote controls. Designers should select capacitors and clock support components according to the manufacturer reference design, provide a stable supply across the operating range, and confirm that each peripheral is clocked and configured for the intended low-power mode.

This page consolidates the exact orderable MPN, verified distributor records, manufacturer documentation, application guidance, and same-family replacement considerations. It also highlights where a different STM8L memory configuration or device variant can reuse the 48-LQFP footprint without assuming that every cross-device software and peripheral arrangement is interchangeable.

Drop-in alternatives for STM8L152C4T6TR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with STM8L152C4T6TR (same form factor and footprint) — differing in Architecture, Flash Memory, Real-Time Clock.

STMicroelectronics
Architecture: 8-bit STM8 CISC
Flash Memory: 16 KB
Real-Time Clock: RTC
Compare with STM8L152C4T6TR →

STM8L151C4T6TR

✅ Drop-In ⚠️ Specs Unverified
📦 48-LQFP (7x7 mm)
Same 48-LQFP footprint and 16 KB memory class, but STM8L151 peripheral feature set differs from STM8L152; 0% difference in the stated C4 memory class.

📋 Reference alternative (not in catalog)

STM8L151C6T6TR

✅ Drop-In ⚠️ Specs Unverified
📦 48-LQFP (7x7 mm)
Same 48-LQFP footprint, but the C6 device has a higher memory class than the C4 target; memory difference is 100% while core frequency remains 16 MHz.

📋 Reference alternative (not in catalog)

STM8L152C6T6TR

✅ Drop-In ⚠️ Specs Unverified
📦 48-LQFP (7x7 mm)
Same 48-LQFP footprint and 16 MHz STM8L152 family, but the C6 device has a higher memory class; memory difference is 100%.

📋 Reference alternative (not in catalog)

STM8L152C8T6TR

✅ Drop-In
📦 48-LQFP (7x7 mm)
Same 48-LQFP footprint and 16 MHz core, but the C8 device provides 64 KB Flash versus 16 KB, a 300% increase.

📋 Reference alternative (not in catalog)

STM8L151C8T6TR

✅ Drop-In ⚠️ Specs Unverified
📦 48-LQFP (7x7 mm)
Same 48-LQFP footprint and 16 MHz core, but the C8 member provides 64 KB Flash and belongs to the STM8L151 feature line, creating a 300% memory difference.

📋 Reference alternative (not in catalog)

STM8L152C4T6TR Maximum Ratings & Electrical Characteristics

Product Type 8-bit ultra-low-power microcontroller
Series STM8L EnergyLite
Maximum CPU Frequency 16 MHz
Flash Memory 16 KB (16K x 8)
RAM Memory 2 KB
Data EEPROM 1 KB
Operating Supply 2.5 V/3.3 V
Package 48-LQFP (7 x 7 mm)
Package Type LQFP
Pin Count 48 pins
Architecture 8-bit CISC
Real-Time Clock Yes
LCD Controller Yes
Serial Interface USART
Serial Bus Interface I2C and SPI
Analog-to-Digital Converter Yes
Digital-to-Analog Converter Yes
Comparator Count 2
Timer Resources Yes
Mounting Type Surface mount
Shipping Format Tape and reel
Lifecycle Status Active

STM8L152C4T6TR lqfp Pin Configuration Guide

Pin configuration for STM8L152C4T6TR (lqfp package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

lqfp package pinout diagram for STM8L152C4T6TR

No detailed pinout data available for STM8L152C4T6TR.

Refer to the datasheet for full pin configuration.

Typical Applications

STM8L152C4T6TR is suitable for 6 applications: Battery-Powered Energy Meter, Industrial Sensor Node, Portable Instrument Panel, Battery-Powered Wearable Accessory, Security and Access-Control Peripheral, Compact Environmental Monitor.

⚡

Battery-Powered Energy Meter

The STM8L152C4T6TR fits compact energy meters because its 16 MHz core can supervise measurements while its RTC, LCD controller, ADC, and comparators support timekeeping, sensing, and local display. The 16 KB Flash and 2 KB RAM are sufficient for a focused meter firmware when data logging and communications remain modest. A low-power operating strategy can reduce average consumption during display refresh and sensor-sampling intervals. The trade-off is limited firmware growth, so reserve memory for calibration, protocol updates, and safety diagnostics before finalizing the application.

🏭

Industrial Sensor Node

The STM8L152C4T6TR is appropriate for a low-duty-cycle industrial sensor node that periodically reads an analog sensor, checks thresholds, and reports results through I2C, SPI, or USART. Its ADC, DAC, and two comparators reduce the need for separate signal-conditioning components, while the 16 MHz core supports protocol and timing tasks. The 2 KB RAM supports compact acquisition and packet buffers but does not accommodate large histories. For deployments requiring long battery life, combine the MCU with a carefully selected regulator, low-leakage sensing network, and scheduled low-power operation.

📺

Portable Instrument Panel

The STM8L152C4T6TR suits portable instrument panels where a local LCD, RTC, keypad input, and serial data link must coexist in a compact 48-LQFP design. The integrated LCD controller removes the need for a separate display interface IC, and the RTC provides a persistent time base for logged measurements. At 16 KB of Flash and 2 KB of RAM, the device is best for focused panels rather than graphics-heavy or highly configurable user interfaces. Validate LCD segment count, contrast timing, keypad scanning, and update latency against the manufacturer reference configuration.

📱

Battery-Powered Wearable Accessory

The STM8L152C4T6TR can manage a wearable accessory that requires periodic interaction, event logging, and communication with a nearby host. Its ultra-low-power STM8L architecture, RTC, timers, and serial interfaces support wake-and-sleep operation, while the comparators can implement simple gesture, contact, or threshold detection. The 16 KB Flash and 2 KB RAM limit the application to relatively compact firmware, and sustained wireless handling should be delegated to a dedicated radio. Board-level leakage and sensor standby current may dominate battery life more than the active MCU current.

🔒

Security and Access-Control Peripheral

The STM8L152C4T6TR is suitable for access-control readers and security peripherals that coordinate credential input, indicator control, event timestamps, and host communication. The timers support timing functions, USART or serial buses can connect to external readers, and the comparators can assist with contact or level detection. Firmware should protect credentials, disable unused debug access where required, and record events without excessive writes to the 1 KB EEPROM. The device is intended for embedded control rather than cryptographic workloads that require a dedicated security accelerator.

🧩

Compact Environmental Monitor

The STM8L152C4T6TR works in a compact environmental monitor that samples sensors, evaluates operating thresholds, and reports measurements through a local serial link. Its ADC accepts analog sensor signals, while the DAC can generate an excitation or reference level and the comparators can implement rapid threshold events. The LCD interface is useful for a small local display, and the RTC timestamps samples without a separate timekeeping component. Care is required because 2 KB of RAM restricts buffering, while the 16 KB Flash budget limits concurrent protocol stacks and elaborate calibration algorithms.

What are the key specifications of STM8L152C4T6TR that engineers should know?
The STM8L152C4T6TR is an 8-bit ultra-low-power MCU with a 16 MHz core, 16 KB of Flash, 2 KB of RAM, and 1 KB of data EEPROM in a 48-LQFP package. According to the STMicroelectronics STM8L152x4 and STM8L152x6 datasheet, the family includes an RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and two comparators. These characteristics make it suitable for low-power metering, sensing, and embedded control products.
What is the STM8L152C4T6TR used for?
The STM8L152C4T6TR is used for compact, low-power embedded control systems such as energy meters, industrial sensor nodes, portable instruments, and access-control devices. Its 16 MHz core manages protocols and control logic, while the RTC, LCD interface, ADC, DAC, comparators, and serial interfaces support sensing, timekeeping, display, and communications without requiring numerous external devices.
How much Flash and RAM does the STM8L152C4T6TR have?
The STM8L152C4T6TR provides 16 KB of Flash organized as 16K x 8 and 2 KB of RAM. Mouser's product record identifies the 16 KB Flash configuration, while the family datasheet also documents 1 KB of data EEPROM. These resources suit moderate control and communication firmware, but applications with larger protocol stacks, extensive GUI data, or complex logging should check the application memory map before committing to this device.
What is the operating voltage of STM8L152C4T6TR?
The STM8L152C4T6TR operates from a 2.5 V/3.3 V supply configuration, according to the Arrow product listing, and the family documentation describes operation from a 3 V supply. Confirm the exact minimum and maximum input limits, reset thresholds, and analog operating conditions for the selected supply mode in the manufacturer datasheet before designing the power tree.
Where can I download the STM8L152C4T6TR datasheet PDF?
The official STM8L152C4T6TR datasheet is the STM8L151x4, STM8L151x6, STM8L152x4, and STM8L152x6 family document published by STMicroelectronics. It contains the electrical characteristics, pin descriptions, memory map, peripherals, and package information needed for schematic capture and firmware development. Use the manufacturer PDF rather than a third-party mirror when validating safety-critical and design-critical limits.
Where is the STM8L152C4T6TR pinout located?
The STM8L152C4T6TR pinout is in the pin-description and package-outline sections of the STMicroelectronics STM8L family datasheet. The device uses a 48-LQFP 7 x 7 mm package with 48 numbered pins. Use the manufacturer's pin table to assign power, ground, analog inputs, communication signals, and debug functions because adjacent pins can support multiple peripheral functions.
What peripherals are integrated into STM8L152C4T6TR?
The STM8L152C4T6TR integrates an RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and two comparators. According to the STMicroelectronics family datasheet, COMP1 and COMP2 share a bias and voltage reference, and the reference may be internal or external through an I/O. This integration supports low-power sensing, threshold detection, metering, and communications.
Is STM8L152C4T6TR suitable for battery-powered products?
Yes, the STM8L152C4T6TR is suitable for battery-powered products because it belongs to the STM8L ultra-low-power family and includes RTC and LCD-oriented resources for low-duty-cycle operation. Its usefulness depends on selecting the appropriate sleep mode, disabling unused peripherals, sizing external capacitors correctly, and measuring the complete system load. The MCU alone cannot determine the final battery life.
Can STM8L151C6T6 replace STM8L152C4T6TR?
STM8L151C6T6 can be considered only after a detailed peripheral, software, and memory review. Both devices appear in the STM8L low-power family, but STM8L151 and STM8L152 have different feature combinations, and the C6 designation also indicates a different memory class from the target C4 device. Pin assignment, current consumption, interrupt mapping, and firmware requirements must be confirmed before treating it as a drop-in replacement.
When should I choose STM8L152C4T6TR over a higher-memory STM8L152 variant?
Choose STM8L152C4T6TR when the final firmware fits within 16 KB of Flash and 2 KB of RAM and the application does not require the additional resources associated with a higher-memory device. Choose a larger-memory member when code growth, buffering, protocol libraries, or firmware updates would exceed the C4 budget. A higher-memory MCU can provide more design headroom, but it may add cost and require different validation.
What is the best drop-in replacement for STM8L152C4T6TR?
No universally validated drop-in replacement is established by the available cross-reference results. The closest candidates are same-package STM8L151 and STM8L152 family members, but changes in memory size, analog peripherals, communication peripherals, and low-power behavior can alter firmware or board requirements. Request a quote for the target MPN and ask the manufacturer to confirm any proposed replacement against the exact orderable code and device revision.
STM8L152C4T6TR vs STM8L152C8T6TR: which is better for firmware expansion?
STM8L152C8T6TR is the better candidate when the application needs more code storage because its distributor record identifies 64 KB of Flash, compared with 16 KB for STM8L152C4T6TR. The larger member occupies the same 48-LQFP 7 x 7 mm package, but the extra memory must still be reflected in firmware organization and validation. This is an expansion choice rather than an exact functional substitution.
Where can I buy STM8L152C4T6TR online and what is its price?
Use the Request a Quote form on this page to request current STM8L152C4T6TR availability, commercial terms, and lead time from XAIPART. The orderable suffix TR denotes the tape-and-reel configuration, so the quote should identify STM8L152C4T6TR exactly rather than a generic STM8L152C4 designation. Confirm lot traceability, packaging, and delivery constraints when the quotation is issued.
What is the lead time for STM8L152C4T6TR?
Current lead time for STM8L152C4T6TR should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production allocation, package format, and destination, so a general catalog statement is not sufficient for a production schedule. Provide the required quantity and target delivery date with the inquiry so current manufacturing and logistics conditions can be reflected.
Is STM8L152C4T6TR currently in stock?
Current stock for STM8L152C4T6TR should be checked through the Request a Quote form on this page rather than inferred from a search listing. The manufacturer lists the STM8L152C4 family as an active product, but active lifecycle status does not guarantee immediate inventory for every package suffix and order quantity. Request the exact tape-and-reel MPN, quantity, and ship-to region for a current allocation response.

Engineering reference data for STM8L152C4T6TR — comparison, design guidance, and compliance information.

Selection Guide

Choose STM8L152C4T6TR for compact, low-power designs that fit within 16 KB of Flash and 2 KB of RAM and need an integrated RTC, LCD controller, ADC, DAC, comparators, and serial interfaces. It is a strong fit for metering, sensor nodes, portable instrument panels, and access-control peripherals. Choose STM8L152C8T6TR when the firmware requires substantially more code space and the 64 KB memory class provides useful expansion. Consider STM8L152C6T6TR when additional memory headroom is needed without changing the STM8L152 feature line. STM8L151C4T6TR and STM8L151C6T6TR share the package family, but they should be considered only after comparing STM8L151 and STM8L152 peripheral differences, interrupt mapping, boot behavior, and firmware requirements. For every alternative, verify the complete orderable suffix, supply limits, pin mux, memory configuration, and low-power behavior against the manufacturer datasheet before releasing a production PCB.

Comparison with Alternatives

Parameter This Product STM8L151C4T6TR STM8L151C6T6TR STM8L152C6T6TR STM8L152C8T6TR STM8L151C8T6TR
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) 48-LQFP (7x7 mm)
CPU Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
Device Family STM8L152 STM8L151 STM8L151 STM8L152 STM8L152 STM8L151
RTC Yes Yes Yes Yes Yes Yes
Core Architecture 8-bit CISC 8-bit CISC 8-bit CISC 8-bit CISC 8-bit CISC 8-bit CISC
Orderable Packaging Tape and reel Tape and reel Tape and reel Tape and reel Tape and reel Tape and reel

Key Differentiators

  • Lower memory configuration for focused firmware (vs STM8L152C8T6TR)
  • STM8L152 feature family with integrated real-time clock (vs STM8L151C4T6TR)
  • Shared 48-LQFP footprint across close family members (vs STM8L151C6T6TR)

Design Notes

Calculate the average supply current from active and sleep-mode periods rather than using the operating-frequency current alone. Estimated: if the MCU draws 1 mA for 20 ms every second and 10 µA while asleep, the average contribution is approximately 20 µA before regulator quiescent current and external sensor loads are added. Use this method to verify that the 2.5 V/3.3 V supply and battery regulator remain within their efficiency and dropout requirements.

Route the 48-LQFP power and ground connections directly to the pins identified in the manufacturer pin table and minimize loop area between supply pins and decoupling capacitors. Place each local decoupling capacitor close to its associated supply pin, and keep analog inputs away from fast-switching LCD or communication traces. The datasheet pin-description table should be used to assign alternate-function pins and verify that every unused input has a defined electrical state.

Do not treat every 48-LQFP member of the STM8L family as an automatic firmware-compatible replacement. The STM8L151 and STM8L152 lines differ in peripheral combinations, and the C4, C6, and C8 memory classes change the available code and RAM budget. Before substituting a candidate, compare the option bytes, interrupt vector table, bootloader assumptions, ADC channels, comparator resources, timers, LCD capabilities, and low-power modes against the target design.

Assign SPI, I2C, and USART functions after reviewing the pin mux and electrical characteristics in the family datasheet. Pull up I2C lines with values that satisfy the bus rise-time requirement, route them away from LCD drive and switching-supply nodes, and keep trace lengths matched where the communication partner imposes a requirement. For ADC measurements, follow the recommended analog grounding and filtering arrangement to prevent LCD or digital switching activity from corrupting low-level readings.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The available manufacturer and distributor records do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for this exact orderable MPN. Use the manufacturer product documentation or declaration of compliance for final procurement approval.

Related Searches

STM8L152C4T6TR datasheet STM8L152C4T6TR datasheet pdf STM8L152C4T6TR pinout STM8L152C4T6TR equivalent STM8L152C4T6TR replacement STM8L152C4T6TR cross reference STM8L152C4T6TR price STM8L152C4T6TR stock STMicroelectronics STM8L152C4T6TR STM8L152C4T6TR LQFP48 pinout STM8L152C4T6TR 16MHz 16KB Flash STM8L152C4T6TR low power application STM8L152C4T6TR vs STM8L152C8T6TR STM8L152C4T6TR schematic

Related Components & Terms

STMicroelectronics STM8L152C4T6TR STM8L152C4 STM8L151C4T6TR STM8L151C6T6TR STM8L152C6T6TR STM8L152C8T6TR STM8L151C8T6TR STM8L STM8L EnergyLite 8-bit microcontroller ultra-low-power MCU embedded controller semiconductor 16 MHz 16 KB Flash 2 KB RAM 1 KB data EEPROM real-time clock LCD controller ADC DAC comparators USART I2C SPI 48-LQFP LQFP package family surface mount SMD battery-powered meter industrial sensor node
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details