STM8L152C4T6TR - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics
料号: STM8L152C4T6TR ✓ 量产中STM8L152C4T6TR 概述
An ultra-low-power microcontroller is an embedded semiconductor designed to execute control and measurement tasks while minimizing energy consumption. The STM8L family hierarchy progresses from MCU to 8-bit microcontroller, ultra-low-power microcontroller, and embedded controller. This positioning makes the STM8L152C4T6TR useful in battery-operated instruments, compact industrial sensors, meter interfaces, and portable equipment where longer standby operation is more important than high computational throughput.
The 16 MHz clock rate provides dedicated processing for protocol handling, timing, data acquisition, and supervisory control. Its 16 KB Flash supports firmware and boot logic, while 2 KB of SRAM accommodates working data and stack requirements. The device supports a 3 V operating supply according to distributor records, while the Arrow listing identifies a 2.5 V/3.3 V configuration. Peripheral integration reduces the need for external components for analog measurements, communications, comparisons, and low-power timekeeping.
The STM8L152C4T6TR also includes two comparators sharing a bias and voltage reference, as described in the STMicroelectronics STM8L151x4/6 and STM8L152x4/6 datasheet. Its internal reference can be selected or overridden through an I/O. These features are useful for threshold detection, sensor conditioning, battery monitoring, and low-power control loops. The LCD interface and RTC are particularly valuable in metering systems that must retain time and present information while consuming minimal power.
Typical uses include compact energy meters, industrial sensor nodes, wearable accessories, low-power instrument panels, security and access peripherals, and battery-powered remote controls. Designers should select capacitors and clock support components according to the manufacturer reference design, provide a stable supply across the operating range, and confirm that each peripheral is clocked and configured for the intended low-power mode.
This page consolidates the exact orderable MPN, verified distributor records, manufacturer documentation, application guidance, and same-family replacement considerations. It also highlights where a different STM8L memory configuration or device variant can reuse the 48-LQFP footprint without assuming that every cross-device software and peripheral arrangement is interchangeable.
直接替换替代料: STM8L152C4T6TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM8L152C4T6TR (相同外形与封装尺寸) ——差异在于 Architecture, Flash Memory, Real-Time Clock.
STM8L151C4T6TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM8L151C6T6TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM8L152C6T6TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM8L152C8T6TR
✅ 直接替换📋 参考替代料(不在目录中)
STM8L151C8T6TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM8L152C4T6TR 最大额定值与电气特性
| Product Type | 8-bit ultra-low-power microcontroller |
| Series | STM8L EnergyLite |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 16 KB (16K x 8) |
| RAM Memory | 2 KB |
| Data EEPROM | 1 KB |
| Operating Supply | 2.5 V/3.3 V |
| 封装 | 48-LQFP (7 x 7 mm) |
| Package Type | LQFP |
| 引脚数量 | 48 pins |
| Architecture | 8-bit CISC |
| Real-Time Clock | Yes |
| LCD Controller | Yes |
| Serial Interface | USART |
| Serial Bus Interface | I2C and SPI |
| Analog-to-Digital Converter | Yes |
| Digital-to-Analog Converter | Yes |
| Comparator Count | 2 |
| Timer Resources | Yes |
| 安装类型 | Surface mount |
| Shipping Format | Tape and reel |
| 生命周期状态 | Active |
STM8L152C4T6TR lqfp 引脚配置指南
STM8L152C4T6TR(lqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM8L152C4T6TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM8L152C4T6TR 适用于 6 应用s: Battery-Powered Energy Meter, Industrial Sensor Node, Portable Instrument Panel, Battery-Powered Wearable Accessory, Security and Access-Control Peripheral, Compact Environmental Monitor.
Battery-Powered Energy Meter
The STM8L152C4T6TR fits compact energy meters because its 16 MHz core can supervise measurements while its RTC, LCD controller, ADC, and comparators support timekeeping, sensing, and local display. The 16 KB Flash and 2 KB RAM are sufficient for a focused meter firmware when data logging and communications remain modest. A low-power operating strategy can reduce average consumption during display refresh and sensor-sampling intervals. The trade-off is limited firmware growth, so reserve memory for calibration, protocol updates, and safety diagnostics before finalizing the application.
推荐
Industrial Sensor Node
The STM8L152C4T6TR is appropriate for a low-duty-cycle industrial sensor node that periodically reads an analog sensor, checks thresholds, and reports results through I2C, SPI, or USART. Its ADC, DAC, and two comparators reduce the need for separate signal-conditioning components, while the 16 MHz core supports protocol and timing tasks. The 2 KB RAM supports compact acquisition and packet buffers but does not accommodate large histories. For deployments requiring long battery life, combine the MCU with a carefully selected regulator, low-leakage sensing network, and scheduled low-power operation.
推荐
Portable Instrument Panel
The STM8L152C4T6TR suits portable instrument panels where a local LCD, RTC, keypad input, and serial data link must coexist in a compact 48-LQFP design. The integrated LCD controller removes the need for a separate display interface IC, and the RTC provides a persistent time base for logged measurements. At 16 KB of Flash and 2 KB of RAM, the device is best for focused panels rather than graphics-heavy or highly configurable user interfaces. Validate LCD segment count, contrast timing, keypad scanning, and update latency against the manufacturer reference configuration.
推荐
Battery-Powered Wearable Accessory
The STM8L152C4T6TR can manage a wearable accessory that requires periodic interaction, event logging, and communication with a nearby host. Its ultra-low-power STM8L architecture, RTC, timers, and serial interfaces support wake-and-sleep operation, while the comparators can implement simple gesture, contact, or threshold detection. The 16 KB Flash and 2 KB RAM limit the application to relatively compact firmware, and sustained wireless handling should be delegated to a dedicated radio. Board-level leakage and sensor standby current may dominate battery life more than the active MCU current.
推荐
Security and Access-Control Peripheral
The STM8L152C4T6TR is suitable for access-control readers and security peripherals that coordinate credential input, indicator control, event timestamps, and host communication. The timers support timing functions, USART or serial buses can connect to external readers, and the comparators can assist with contact or level detection. Firmware should protect credentials, disable unused debug access where required, and record events without excessive writes to the 1 KB EEPROM. The device is intended for embedded control rather than cryptographic workloads that require a dedicated security accelerator.
推荐
Compact Environmental Monitor
The STM8L152C4T6TR works in a compact environmental monitor that samples sensors, evaluates operating thresholds, and reports measurements through a local serial link. Its ADC accepts analog sensor signals, while the DAC can generate an excitation or reference level and the comparators can implement rapid threshold events. The LCD interface is useful for a small local display, and the RTC timestamps samples without a separate timekeeping component. Care is required because 2 KB of RAM restricts buffering, while the 16 KB Flash budget limits concurrent protocol stacks and elaborate calibration algorithms.
推荐
推荐产品汇总
工程参考数据: STM8L152C4T6TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM8L151C4T6TR | STM8L151C6T6TR | STM8L152C6T6TR | STM8L152C8T6TR | STM8L151C8T6TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) |
| CPU Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Device Family | STM8L152 | STM8L151 | STM8L151 | STM8L152 | STM8L152 | STM8L151 |
| RTC | Yes | Yes | Yes | Yes | Yes | Yes |
| Core Architecture | 8-bit CISC | 8-bit CISC | 8-bit CISC | 8-bit CISC | 8-bit CISC | 8-bit CISC |
| Orderable Packaging | Tape and reel | Tape and reel | Tape and reel | Tape and reel | Tape and reel | Tape and reel |
关键差异点
- Lower memory configuration for focused firmware (对比 STM8L152C8T6TR)
- STM8L152 feature family with integrated real-time clock (对比 STM8L151C4T6TR)
- Shared 48-LQFP footprint across close family members (对比 STM8L151C6T6TR)
设计说明
Calculate the average supply current from active and sleep-mode periods rather than using the operating-frequency current alone. Estimated: if the MCU draws 1 mA for 20 ms every second and 10 µA while asleep, the average contribution is approximately 20 µA before regulator quiescent current and external sensor loads are added. Use this method to verify that the 2.5 V/3.3 V supply and battery regulator remain within their efficiency and dropout requirements.
Route the 48-LQFP power and ground connections directly to the pins identified in the manufacturer pin table and minimize loop area between supply pins and decoupling capacitors. Place each local decoupling capacitor close to its associated supply pin, and keep analog inputs away from fast-switching LCD or communication traces. The datasheet pin-description table should be used to assign alternate-function pins and verify that every unused input has a defined electrical state.
Do not treat every 48-LQFP member of the STM8L family as an automatic firmware-compatible replacement. The STM8L151 and STM8L152 lines differ in peripheral combinations, and the C4, C6, and C8 memory classes change the available code and RAM budget. Before substituting a candidate, compare the option bytes, interrupt vector table, bootloader assumptions, ADC channels, comparator resources, timers, LCD capabilities, and low-power modes against the target design.
Assign SPI, I2C, and USART functions after reviewing the pin mux and electrical characteristics in the family datasheet. Pull up I2C lines with values that satisfy the bus rise-time requirement, route them away from LCD drive and switching-supply nodes, and keep trace lengths matched where the communication partner imposes a requirement. For ADC measurements, follow the recommended analog grounding and filtering arrangement to prevent LCD or digital switching activity from corrupting low-level readings.
合规信息
The available manufacturer and distributor records do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for this exact orderable MPN. Use the manufacturer product documentation or declaration of compliance for final procurement approval.