Microchip Technology

SY89429AZC - 400MHz Programmable Clock Synthesizer | Microchip

MPN: SY89429AZC ✓ Active
28-SOIC, 7.50 mm width Package 25 MHz to 400 MHz Speed
MOQ: 1 |

SY89429AZC Overview

The Microchip SY89429AZC is a programmable frequency synthesizer covering 25 MHz to 400 MHz, with differential PECL outputs and ±25 ps peak-to-peak output jitter. The device is housed in a 28-SOIC package measuring 7.50 mm wide and is categorized as a clock-generation, PLL, and frequency-synthesis IC.

A programmable frequency synthesizer generates one or more clock signals from a controlled internal reference. Within the clock and timing hierarchy, it sits above a crystal oscillator and below the clock-distribution circuits used by processors, transceivers, converters, and test equipment. Its synthesized architecture allows the output frequency to be set through an external controller rather than remaining fixed at the reference frequency.

The SY89429AZC provides a serial three-wire programming interface and a parallel interface for power-on configuration. According to the Micrel Semiconductor data sheet, the serial interface uses a 14-bit shift register, while S_CLOCK shifts data on each rising edge and S_LOAD captures the configuration on its HIGH-to-LOW transition. An internal quartz reference supports autonomous clock generation without requiring an external frequency reference.

Output performance is centered on low jitter. The differential PECL outputs reach a peak-to-peak jitter of ±25 ps at 400 MHz, making the device suitable for timing systems requiring precise edge placement. The synthesizer also features minimal frequency overshoot, an important behavior for avoiding transient frequency excursions during frequency transitions or clock startup.

The device is suited to communication equipment, high-speed digital systems, data converters, test and measurement instrumentation, and clock-generation subsystems. Differential PECL outputs can feed line receivers or downstream clock buffers, while programmable operation permits different frequencies to be selected for multiple board-level timing requirements. The 28-SOIC package supports conventional surface-mount assembly.

Designers should use the complete pin-description and connection tables in the Microchip data sheet when assigning tracks and selecting interface termination. Differential output routing should be short and impedance-controlled, and unused inputs should be handled according to the device recommendations. Programming signals and clock outputs should be separated from sensitive analog paths to reduce coupling.

This page combines the device's documented frequency, interface, jitter, output, package, and compliance characteristics with engineering guidance for programming, layout, signal integrity, and sourcing. It also distinguishes exact catalog information from parameters that require confirmation against the manufacturer data sheet before a production design is released.

Drop-in alternatives for SY89429AZC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

SY89429AZC Specifications

Product Type Programmable frequency synthesizer
Frequency Range 25 MHz to 400 MHz
Maximum Clock Frequency 800 MHz
Output Type Differential PECL
Output Jitter ±25 ps peak-to-peak at 400 MHz
Frequency Overshoot Minimal
Architecture Synthesized
Serial Programming Interface 3-wire serial interface
Serial Shift Register 14 bit
Parallel Interface Available for power-on configuration
Reference Source Internal quartz reference
Package 28-SOIC, 7.50 mm width
Mounting Type Surface mount
RoHS Status Non-compliant

SY89429AZC 28-soic, 7.50 mm width Pin Configuration Guide

Pin configuration for SY89429AZC (28-soic, 7.50 mm width package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

28-soic, 7.50 mm width package pinout diagram for SY89429AZC

No detailed pinout data available for SY89429AZC.

Refer to the datasheet for full pin configuration.

Typical Applications

SY89429AZC is suitable for 6 applications: High-Speed Communication Clocking, Data Converter Clock Generation, Instrumentation and Test Equipment, Digital Clock-Distribution Hub, Industrial Control and Timing Subsystems, PCIe and Serial-Link Support Circuits.

🌐

High-Speed Communication Clocking

The SY89429AZC fits communication subsystems that require a programmable differential clock with low deterministic jitter. Its documented 25 MHz-to-400 MHz output range covers multiple clocking requirements, while ±25 ps peak-to-peak jitter at 400 MHz helps preserve edge timing through downstream receivers, retimers, or logic devices. The differential PECL outputs should be routed as a controlled-impedance pair, and the receiving circuit must be compatible with the device's output voltage levels. A programmable interface allows a controller to select the operating frequency during initialization or as part of an operating-mode change.

⚡

Data Converter Clock Generation

The SY89429AZC can supply a stable, programmable sampling clock to data-conversion systems where edge placement affects conversion timing. At 400 MHz, the documented peak-to-peak output jitter of ±25 ps provides a useful reference for timing-margin analysis, while the 25 MHz-to-400 MHz range allows the same synthesizer concept to serve multiple conversion rates. Differential PECL routing helps maintain signal integrity over the board. Designers must confirm that the converter's clock-input voltage, impedance, and jitter requirements match the synthesizer output and account for receiver or divider-added jitter.

🔧

Instrumentation and Test Equipment

Programmable clock generation is valuable in instrumentation and automated test systems that must exercise circuitry across different operating frequencies. The SY89429AZC supports output frequencies from 25 MHz through 400 MHz, allowing one synthesizer to serve multiple test profiles instead of relying on a fixed-frequency oscillator. Its low ±25 ps peak-to-peak jitter at 400 MHz supports precise stimulus timing, while differential PECL outputs can drive compatible receiver logic or clock-distribution stages. Firmware can adjust the synthesis configuration through the three-wire interface for automated test sequences.

🖥️

Digital Clock-Distribution Hub

The SY89429AZC can act as the programmable source at the center of a clock-distribution hierarchy. Instead of distributing a fixed oscillator signal directly to multiple loads, the design can synthesize a chosen frequency and send it through buffered clock-tree stages. Differential PECL outputs support controlled routing to compatible receiver or buffer inputs, and the 400 MHz upper limit accommodates demanding digital logic domains. The implementation must preserve output-impedance continuity, provide suitable return paths, and observe the manufacturer pin and reference-circuit recommendations.

🏭

Industrial Control and Timing Subsystems

Industrial control electronics can use the SY89429AZC when multiple functional blocks require a programmable clock derived from a common internal quartz reference. Combining the reference, synthesizer, and programmable control reduces the number of independent oscillator arrangements that must be calibrated across a production board. The 25 MHz-to-400 MHz range accommodates logic, conversion, and communications clocking needs, while ±25 ps peak-to-peak jitter at 400 MHz supports precise timing at the upper operating limit. Isolation and signal-integrity requirements should be evaluated for each industrial environment.

🔧

PCIe and Serial-Link Support Circuits

The SY89429AZC may support auxiliary clocking in serial-link and high-speed interface systems when the required frequency lies within its 25 MHz-to-400 MHz programming range. Its differential PECL output and low jitter are useful for timing-critical service clocks or local synchronization networks, although the device is not itself a PCIe protocol controller. Use it only where its programmed frequency, output amplitude, and interface timing satisfy the surrounding circuit. Point-to-point routing, controlled reference planes, and careful return-path continuity are essential to preserve the specified output-jitter performance.

What is the operating frequency range of the SY89429AZC?
The SY89429AZC operates as a programmable frequency synthesizer over a 25 MHz to 400 MHz range. According to the Micrel Semiconductor manufacturer data sheet, this range defines the programmable clock-generation capability of the device. A separate distributor catalog entry identifies an 800 MHz maximum clock frequency, so engineers should confirm whether that figure refers to an internal PLL, an output-related limit, or another operating condition before using it for design calculations.
What are the key specifications of SY89429AZC that engineers should know?
The SY89429AZC combines a 25 MHz-to-400 MHz programmable output range with differential PECL outputs and ±25 ps peak-to-peak jitter at 400 MHz. According to the Micrel Semiconductor manufacturer data sheet, it uses a synthesized architecture, a 14-bit serial shift register, a three-wire programming interface, parallel power-on configuration, and an internal quartz reference. The device is packaged in a 28-SOIC.
Where can I download the SY89429AZC datasheet PDF?
The manufacturer-hosted SY89429A data sheet is available at https://ww1.microchip.com/downloads/en/DeviceDoc/sy89429a.pdf. It covers the SY89429A family represented by the SY89429AZC ordering code and describes the frequency range, PECL outputs, jitter, serial programming logic, parallel power-on interface, and electrical characteristics. Use the pin-description and AC-parameter sections when finalizing board connections and timing margins.
Where can I find the SY89429AZC pinout?
The SY89429AZC pinout is documented in the pin-description table of the Micrel Semiconductor SY89429A manufacturer data sheet at https://ww1.microchip.com/downloads/en/DeviceDoc/sy89429a.pdf. The component uses a 28-SOIC package, so assign every physical pin from that table rather than inferring connectivity from generic clock-generator diagrams. In particular, verify power, ground, reference, programming, and differential-output connections before PCB release.
How is the SY89429AZC programmed?
The SY89429AZC is programmed through a serial three-wire interface or a parallel interface used for power-on configuration. According to the Micrel Semiconductor manufacturer data sheet, the serial logic uses a 14-bit shift register that shifts on each rising edge of S_CLOCK, while P_LOAD held HIGH allows the configuration to latch on the HIGH-to-LOW edge of S_LOAD. This architecture supports deterministic controller-driven frequency setup.
Does the SY89429AZC require an external crystal?
The SY89429AZC includes an internal quartz reference, according to the Micrel Semiconductor manufacturer data sheet. That feature allows the synthesizer to establish its operating reference without depending on a separate crystal oscillator assembly. Board designers should still follow the manufacturer reference-circuit and decoupling guidance and confirm grounding and layout recommendations for the selected production design.
What is the output jitter of the SY89429AZC?
The differential PECL outputs of the SY89429AZC provide ±25 ps peak-to-peak jitter at 400 MHz. According to the Micrel Semiconductor manufacturer data sheet, the device also minimizes frequency overshoot during operating transitions. These characteristics make the synthesizer relevant to high-speed communication, data conversion, timing, and instrumentation systems where clock-edge stability directly affects signal integrity.
Where can I buy SY89429AZC and check its current availability?
Use the Request a Quote form on this page to request the current SY89429AZC price, stock position, minimum order quantity, and lead time. The Request a Quote workflow gives buyers a direct route for current commercial terms without relying on a static price that may change. Confirm the exact SY89429AZC ordering code, 28-SOIC package, and required quantity when submitting the request.
How much does the SY89429AZC cost?
Current SY89429AZC pricing should be requested through the Request a Quote form on this page because commercial terms can vary with quantity, sourcing channel, package quantity, and market conditions. Use the form to obtain a unit-price proposal and request the relevant stock and lead-time information. The form also helps ensure that the quotation is tied to the exact SY89429AZC part number rather than a related frequency synthesizer.
What is the lead time for SY89429AZC?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing availability, packaging requirements, and the approved sourcing channel, so a current quotation is the appropriate source for procurement planning. Include the target quantity and intended assembly schedule when asking for the delivery commitment.
Is the SY89429AZC currently in stock?
The current SY89429AZC stock position should be confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, and shipment destination so procurement can check current availability against the requested schedule. This approach avoids presenting a potentially stale stock indication for a programmable clock synthesizer.
What can replace the SY89429AZC without a PCB redesign?
A true drop-in replacement for the SY89429AZC must use the same 28-SOIC footprint, maintain pin-to-pin compatibility, and provide equivalent programmable-clock and PECL-output behavior. No uniquely verified drop-in substitute is identified on the product page, so use the Microchip cross-reference search and validate the candidate against the manufacturer pin and electrical tables. A same-category PLL is not automatically a drop-in replacement.
Is the SY89429AZC the same as another 400 MHz frequency synthesizer?
The SY89429AZC is not necessarily interchangeable with another 400 MHz frequency synthesizer even when both devices cover a similar frequency range. According to the Micrel Semiconductor manufacturer data sheet, this device uses a specific synthesized architecture, differential PECL outputs, a 14-bit serial shift register, and a parallel power-on interface. Confirm pin assignments, programming voltage levels, output logic, supply requirements, and timing specifications before considering any substitute.
When should I choose the SY89429AZC for a clock-generation design?
Choose the SY89429AZC when a design requires programmable operation from 25 MHz to 400 MHz, differential PECL outputs, and low peak-to-peak jitter of ±25 ps at 400 MHz. The three-wire serial control and parallel power-on configuration support both programmed operation and predetermined startup. Confirm supply rails, absolute output levels, reference implementation, and the complete 28-SOIC pinout in the manufacturer data sheet.
Is the SY89429AZC suitable for communication and high-speed digital systems?
The SY89429AZC is suitable for communication and high-speed digital clock subsystems that can use differential PECL outputs and require programmable frequencies. Its stated ±25 ps peak-to-peak jitter at 400 MHz provides the key timing consideration, while the 25 MHz-to-400 MHz range supports multiple clock domains. The receiving circuitry must support the output voltage levels and termination requirements of the differential PECL interface.
Is the SY89429AZC RoHS compliant?
The SY89429AZC is listed as RoHS non-compliant in the catalog information associated with the product. According to that listing, the component belongs to Integrated Circuits > Clock/Timing as a clock generator, PLL, and frequency synthesizer. Treat the non-compliant classification as important for environmental-material planning, and request current manufacturer declarations for RoHS, REACH, halogen-free status, and conflict-minerals reporting before new production release.

Engineering reference data for SY89429AZC — comparison, design guidance, and compliance information.

Selection Guide

Choose the SY89429AZC when a design needs a programmable clock source covering 25 MHz to 400 MHz with differential PECL outputs. Its principal benefits are ±25 ps peak-to-peak jitter at 400 MHz, a three-wire serial programming interface, parallel power-on configuration, and an internal quartz reference. It is particularly suitable for communication, conversion, instrumentation, and digital timing systems that can accept PECL output levels. Before committing to the device, verify its supply-voltage limits, operating-temperature range, reference implementation, and complete 28-SOIC pinout against the manufacturer data sheet. Do not select a generic 400 MHz PLL solely by frequency: the programming protocol, output voltage, pin arrangement, reference requirements, and AC timing must also match. A qualified drop-in substitute should be selected only after Microchip's cross-reference search and an engineering review of the package and pin functions.

Comparison with Alternatives

Parameter This Product
Brand Microchip Technology
Package 28-SOIC, 7.50 mm width
Programmable Frequency Range 25 MHz to 400 MHz
Maximum Clock Frequency 800 MHz
Output Type Differential PECL
Peak-to-Peak Output Jitter ±25 ps at 400 MHz
Programming Interface 3-wire serial and parallel power-on interface
Serial Shift Register 14 bit
Reference Internal quartz reference
Frequency Overshoot Minimal
RoHS Status Non-compliant

Design Notes

Route the differential PECL outputs as a compact, length-matched pair with a continuous reference plane beneath the pair. Keep the programming traces S_CLOCK, S_DATA, S_LOAD, and the parallel configuration inputs away from the clock outputs to reduce coupling into the edge-sensitive clock path. Follow the reference schematic and package pin table in the Micrel Semiconductor manufacturer data sheet for bypass-capacitor placement and grounding.

Confirm the output voltage levels and receiver thresholds before connecting the PECL outputs. Differential routing alone does not establish logic compatibility if the receiver expects another family or supply voltage. Use the manufacturer's AC parameters and application guidance to evaluate data edges, return paths, and termination. PCB fabrication constraints and receiver input capacitance should also be included in the edge-rate assessment.

Do not replace the complete pin-description table with a generic clock-generator pinout. The serial interface uses a 14-bit shift register and captures configuration on the specified S_LOAD transition, while parallel configuration serves a separate power-on role. Validate the controller command sequence against the manufacturer's timing diagrams and confirm all supply, ground, reference, and programming connections before programming the device.

Compliance Information

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS non-compliant status comes from the SY89429AZC catalog listing. No current manufacturer declarations for REACH, halogen-free status, or conflict-minerals compliance were identified. The device is an industrial clock-generation IC rather than an automotive-qualified product.

Related Searches

SY89429AZC datasheet SY89429AZC pinout SY89429AZC datasheet pdf SY89429AZC specifications SY89429AZC price SY89429AZC stock SY89429AZC equivalent SY89429AZC replacement SY89429A frequency synthesizer Microchip SY89429AZC 400MHz differential PECL synthesizer 28-SOIC programmable clock synthesizer

Related Components & Terms

Microchip Technology Micrel Semiconductor SY89429AZC SY89429A programmable frequency synthesizer clock generator phase-locked loop PLL frequency synthesizer clock and timing IC differential PECL 25 MHz to 400 MHz ±25 ps peak-to-peak jitter 3-wire serial interface 14-bit shift register parallel power-on interface internal quartz reference 28-SOIC package S_CLOCK S_DATA S_LOAD minimal frequency overshoot RoHS semiconductor
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details