Microchip Technology

SY89529LTC - 200MHz Spread-Spectrum Clock | Microchip Technology

MPN: SY89529LTC ✗ End of Life
3.3 V nominal Vdss 32-TQFP Package 200 MHz Speed
MOQ: 1 |

SY89529LTC Overview

The Microchip Technology SY89529LTC is a 3.3 V precision spread-spectrum clock synthesizer that generates a 200 MHz LVPECL output from a low-cost 16.66 MHz crystal. It is supplied in a 32-pin TQFP package and provides 0.5% spread-spectrum modulation control, which can reduce electromagnetic interference by more than 7 dB. The device also supports LVTTL and LVCMOS-compatible operation, making it suitable for systems that require a low-noise, high-frequency clock without the power cost of a large FPGA clock solution.

A clock synthesizer is a timing IC that uses a frequency reference, typically a crystal oscillator, to generate one or more stable clock outputs. Clock synthesizers form part of the clock and timing hierarchy within integrated circuits and are commonly used to supply deterministic reference frequencies to processors, communications equipment, storage controllers, and test systems. The SY89529LTC combines a precision phase-locked loop with spread-spectrum modulation in a single surface-mount package.

The principal features of this clock synthesizer are its 200 MHz maximum output frequency, 16.66 MHz crystal reference input, 3.3 V low-voltage supply operation, and selectable 0.5% spread-spectrum modulation. The LVPECL output is suited to high-speed digital interconnect, while the LVTTL and LVCMOS-compatible capability broadens its usefulness across mixed-signal and legacy digital systems. A surface-mount 32-TQFP package supports compact assembly on multilayer printed circuit boards.

Technically, the SY89529LTC multiplies the 16.66 MHz reference to produce a 200 MHz clock while adding controlled frequency dither through spread-spectrum modulation. This technique deliberately distributes clock energy across a frequency band rather than concentrating it around one carrier frequency. The result can reduce narrowband electromagnetic emissions and improve system-level EMI margin. The 0.5% modulation setting should be evaluated against receiver timing requirements and downstream jitter specifications because the frequency excursion also creates additional timing uncertainty.

Typical uses include high-speed communications equipment, industrial control systems, network interface modules, storage systems, and clock-distribution trees for FPGA or ASIC-based designs. Its 200 MHz LVPECL output is especially relevant when the receiving logic requires a differential high-speed clock. It may also be used in test and measurement equipment that needs a precise reference clock with adjustable spectral spreading.

When laying out the circuit, place the crystal, decoupling capacitors, clock output components, and termination network according to the manufacturer datasheet. Keep the reference oscillator path short, provide clean ground returns, and use termination appropriate to the LVPECL interface. Validate both spread-spectrum enabled and disabled operation across the required temperature range because the modulation envelope changes the instantaneous output frequency.

This product page combines the manufacturer-family characteristics, verified distributor listing information, application guidance, and pin-compatible replacement criteria in one place. It also distinguishes documented specifications from parameters that require confirmation from the datasheet, helping engineers evaluate the SY89529LTC for new clock-tree, EMI-control, and high-speed digital-interface designs.

Drop-in alternatives for SY89529LTC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

SY89529LTC Specifications

Product Type Precision spread-spectrum clock synthesizer
Supply Voltage 3.3 V nominal
Maximum Output Frequency 200 MHz
Crystal Reference Frequency 16.66 MHz
Output Type LVPECL
Spread-Spectrum Modulation Control 0.5%
EMI Reduction Greater than 7 dB
Compatible Logic Levels LVTTL and LVCMOS
PLL Yes
Input to Output Ratio 12:1 at 16.66 MHz to 200 MHz
Operating Temperature Range 0°C to 85°C
Package 32-TQFP
Mounting Type Surface mount
Number of Pins 32 pins
Number of Outputs 1 output

SY89529LTC 32-tqfp Pin Configuration Guide

Pin configuration for SY89529LTC (32-tqfp package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

32-tqfp package pinout diagram for SY89529LTC

No detailed pinout data available for SY89529LTC.

Refer to the datasheet for full pin configuration.

Typical Applications

SY89529LTC is suitable for 6 applications: High-Speed Communications Clocking, FPGA and ASIC Clock Trees, Industrial Control and Data Acquisition, Network and Storage Interface Modules, Test and Measurement Equipment, EMI-Controlled Consumer Electronics.

🌐

High-Speed Communications Clocking

The SY89529LTC fits communications equipment requiring a precise 200 MHz differential reference with controlled spectral spreading. Its LVPECL output supports high-speed clock distribution, while 0.5% modulation can reduce narrowband harmonics by more than 7 dB according to the Micrel datasheet. The device operates from 3.3 V and uses a 16.66 MHz crystal, providing a practical PLL-based alternative to a dedicated high-frequency oscillator. Designers should verify line impedance, receiver thresholds, and the timing impact of modulation before release.

🖥️

FPGA and ASIC Clock Trees

The SY89529LTC can serve as the source clock for an FPGA or ASIC clock tree when a 200 MHz LVPECL interface and reduced narrowband emissions are priorities. Its PLL-based architecture multiplies a 16.66 MHz crystal reference to the target frequency, while the spread-spectrum function distributes energy across a wider band. In a design, use short clock routes, solid ground-plane continuity, and output termination appropriate to the receiver. Confirm that the downstream PLL accommodates the 0.5% frequency excursion and associated jitter.

🏭

Industrial Control and Data Acquisition

The SY89529LTC is applicable to industrial controllers and data-acquisition equipment that need a stable reference clock while controlling conducted or radiated emissions. Its 3.3 V supply operation and 200 MHz LVPECL output suit compact mixed-signal systems, and the 0.5% spread-spectrum control offers an additional margin against narrowband interference. The design should preserve short return paths between the oscillator, PLL, and clock outputs. Validate clock accuracy over the 0°C to 85°C operating range and account for modulation when calculating acquisition timing budgets.

🌐

Network and Storage Interface Modules

The SY89529LTC can provide the 200 MHz reference used by high-speed network-interface, storage-controller, and data-transfer modules. LVPECL is useful where long PCB interconnects, multiple loads, or noisy surroundings require a robust differential clock. Spread-spectrum modulation may lower narrowband clock harmonics that couple into adjacent data lanes. Use controlled-impedance routing and matched termination, and verify that the receiving PHY or controller locks correctly with the clock frequency moving across the 0.5% modulation band.

🔧

Test and Measurement Equipment

The SY89529LTC suits test equipment that requires a repeatable 200 MHz timing reference with adjustable spectral spreading. The 16.66 MHz crystal reference and PLL multiplication establish the nominal output, while the 0.5% spread-spectrum mode can help suppress discrete clock lines observed on sensitive analyzers. Laboratory designs should characterize both average frequency and peak-to-peak jitter with modulation enabled. Use short crystal connections, low-inductance decoupling, and proper LVPECL biasing so measurement results are not dominated by board-level reflections or supply noise.

📱

EMI-Controlled Consumer Electronics

The SY89529LTC is useful in compact consumer electronics where a high-frequency digital clock creates narrowband emissions that are difficult to suppress with filtering alone. Its spread-spectrum modulation can reduce a clock carrier by more than 7 dB, while the compact 32-TQFP package preserves board area. The implementation must still account for the PLL reference loop, crystal loading, and LVPECL output network. Confirm that downstream chips tolerate the modulated frequency and evaluate radiated emissions at the enclosure and cable-interface level.

What is the SY89529LTC clock synthesizer used for?
The SY89529LTC generates a 200 MHz precision clock from a 16.66 MHz crystal and provides spread-spectrum modulation for improved electromagnetic-interference behavior. According to the Micrel datasheet description, it supports a 3.3 V supply, LVPECL output, 0.5% spread-spectrum control, and more than 7 dB of EMI reduction. It is intended for high-speed digital systems requiring a precise clock with reduced narrowband emissions.
What is the output frequency of SY89529LTC?
The SY89529LTC produces a maximum output frequency of 200 MHz. The Micrel datasheet describes the device as a 3.3 V, 200 MHz precision spread-spectrum clock synthesizer operated from a low-cost 16.66 MHz crystal. This 12:1 multiplication relationship makes the part appropriate for high-speed communications, FPGA clock trees, storage interfaces, and other systems requiring a stable 200 MHz differential clock.
What is the spread-spectrum modulation percentage of SY89529LTC?
The SY89529LTC provides 0.5% spread-spectrum modulation control. According to the Micrel datasheet feature summary, this modulation can reduce electromagnetic interference by more than 7 dB by distributing clock energy over a frequency band. The setting adds time-varying jitter, so system timing margins should be evaluated with spread spectrum both enabled and disabled.
Which output standard does SY89529LTC support?
The SY89529LTC provides an LVPECL output and is also compatible with LVTTL and LVCMOS interfaces. The Micrel datasheet identifies 200 MHz LVPECL as its principal high-speed output and separately lists LVTTL and LVCMOS compatibility. Termination and voltage requirements must match the connected receiver rather than being determined solely by the clock source logic level.
Where can I download the SY89529LTC datasheet PDF?
The SY89529LTC datasheet PDF is available through the datasheet link on this page and through the manufacturer's product information. The PDF identifies the device as a 3.3 V, 200 MHz precision spread-spectrum clock synthesizer with a 32-TQFP package. Use the pin-description table, crystal load-capacitance guidance, and recommended application circuit when assigning PCB nets and component values.
Where is the pinout for SY89529LTC?
The SY89529LTC pinout is documented in the manufacturer's 32-TQFP pin-description table and package drawing. The device includes power, ground, crystal, control, and clock-output connections that must be assigned according to that table. Use the package drawing to preserve the exposed-pad and thermal requirements, then follow the recommended decoupling and LVPECL termination networks.
How does spread-spectrum modulation help SY89529LTC reduce EMI?
The SY89529LTC reduces narrowband EMI by varying the output frequency around its nominal 200 MHz value with 0.5% spread-spectrum modulation. According to the Micrel datasheet, this technique provides more than 7 dB of EMI reduction. The benefit is strongest for clock harmonics, although downstream devices must tolerate the resulting cycle-to-cycle and long-term timing variation.
What is the operating temperature range of SY89529LTC?
The SY89529LTC is listed for an operating temperature range of 0°C to 85°C. Its 3.3 V operating supply and 200 MHz LVPECL output remain within the published component description, while temperature qualification covers industrial commercial conditions. Systems operating outside 0°C to 85°C require a different temperature-rated clock source.
Can SY89529LTC replace a 200 MHz clock oscillator?
The SY89529LTC can replace a discrete oscillator only when the receiver accepts the device's LVPECL interface and the complete reference and output network is redesigned. The clock synthesizer requires a 16.66 MHz crystal, PLL support components, power decoupling, and suitable LVPECL termination. It should not be treated as a two-pin oscillator substitute because its package, supply connections, and logic interface are different.
When should I choose SY89529LTC over a fixed-frequency oscillator?
Choose the SY89529LTC when a system requires a 200 MHz differential clock and electromagnetic-emission improvement through spread-spectrum modulation. A fixed oscillator is simpler when the clock can use a single-ended interface and no spectral spreading is needed. The SY89529LTC adds a PLL and spread-spectrum control but reduces dependence on a dedicated high-frequency oscillator assembly.
Is SY89529LTC suitable for an FPGA or ASIC clock tree?
The SY89529LTC is suitable for an FPGA or ASIC clock tree when the design requires a 200 MHz LVPECL source with controlled spectral spreading. Its 0.5% modulation can reduce narrowband clock harmonics, while the 32-TQFP package leaves only a 3.3 V single-supply rail to distribute. Confirm the FPGA clock-input threshold, PLL multiplication ratio, jitter budget, and spread-spectrum tolerance.
What is the best drop-in replacement for SY89529LTC?
No drop-in replacement can be confirmed from the available cross-reference results. A valid replacement must use the same 32-TQFP footprint, preserve pin-to-pin connections, operate from 3.3 V, provide a 200 MHz LVPECL output, and retain the required 16.66 MHz reference and spread-spectrum functions. Parts with similar frequency alone are not adequate because crystal inputs, controls, and output termination can differ.
What can replace SY89529LTC on the same PCB?
A same-PCB replacement should be selected only after its pinout and electrical behavior are verified against the manufacturer datasheet. The required minimum is a 32-TQFP pin-compatible clock synthesizer with a 3.3 V supply, 16.66 MHz reference support, 200 MHz LVPECL output, and equivalent spread-spectrum control. The available family references do not establish five verified drop-in choices, so Request a Quote should be used to ask for sourcing support with the exact footprint requirements.
SY89529LTC versus SY89529LZC: are they interchangeable?
The SY89529LTC and SY89529LZC must not be assumed to be interchangeable because their orderable suffixes identify different package configurations. The SY89529LTC is documented in a 32-TQFP package, while the exact pin compatibility and board footprint of the LZC ordering code require separate manufacturer confirmation. Even if their clock functions match, a different package or lead arrangement prevents drop-in board reuse.
How can I buy SY89529LTC and confirm current availability?
Use the Request a Quote form on this page to request the current quantity, lead time, and availability for SY89529LTC. The manufacturer-family listing describes a 32-TQFP clock synthesizer, while distributor status can change independently by region and stocking model. A quote request should specify the required quantity, package suffix, target date, and whether the complete assembly or bare IC is needed.
What are the key specifications of SY89529LTC that engineers should know?
The SY89529LTC is a 3.3 V, 200 MHz precision spread-spectrum clock synthesizer in a 32-TQFP package. According to the Micrel datasheet description, it uses a 16.66 MHz crystal reference, provides LVPECL output, supports 0.5% spread-spectrum modulation, and offers more than 7 dB of EMI reduction. LVTTL and LVCMOS compatibility broaden its interface use, while PLL architecture supports frequency multiplication.

Engineering reference data for SY89529LTC — comparison, design guidance, and compliance information.

Selection Guide

Choose the SY89529LTC for a 3.3 V design that needs a precise 200 MHz LVPECL clock with 0.5% spread-spectrum modulation and a documented reduction of more than 7 dB in narrowband EMI. Its 16.66 MHz crystal reference and 32-TQFP package suit compact, multilayer PCB implementations where differential clock distribution and controlled spectral spreading are important. A fixed oscillator remains simpler when the receiver accepts a single-ended clock and spectral spreading is unnecessary. The SY89529LZC may represent a related ordering option, but its package must be checked before considering PCB reuse. The SY89530LTC is another family reference, not a confirmed substitute; verify frequency, reference, control, and pin compatibility. Because no alternative has been demonstrated as pin-to-pin compatible, do not approve a replacement without a manufacturer package drawing, complete pin table, and side-by-side electrical comparison.

Comparison with Alternatives

Parameter This Product
Brand Microchip Technology
Package 32-TQFP
Device Type Precision spread-spectrum clock synthesizer
Supply Voltage 3.3 V nominal
Maximum Output Frequency 200 MHz
Reference Frequency 16.66 MHz crystal
Primary Output LVPECL
Spread-Spectrum Modulation 0.5%
EMI Reduction Greater than 7 dB
Operating Temperature 0°C to 85°C

Design Notes

Place the 16.66 MHz crystal and its load components close to the clock-generator pins, and keep the oscillator loop away from LVPECL outputs and switching nodes. Use a continuous ground plane beneath the timing circuit and provide local 3.3 V decoupling. The manufacturer datasheet should determine crystal load capacitance, component values, and the exact ground and power-pin assignments.

Use LVPECL termination and biasing appropriate to the receiver topology rather than treating the output as a conventional LVCMOS signal. Route the differential clock over a continuous reference plane with controlled impedance, minimize stubs, and keep output circuitry away from sensitive analog inputs. Confirm the 200 MHz eye mask and the effect of 0.5% frequency spreading at the receiving device.

Spread-spectrum modulation reduces narrowband clock energy but does not eliminate broadband emissions or common-mode noise. Measure the fundamental and harmonics both with modulation enabled and disabled, and inspect cable or connector-related emissions as well as PCB radiation. Maintain short ground connections and use appropriate return vias around every decoupling capacitor.

Do not select a replacement solely because it also produces a 200 MHz clock. A drop-in device must match the 32-TQFP footprint, supply level, crystal interface, control functions, and LVPECL output behavior. Also evaluate PLL lock time, output jitter, reference sensitivity, and modulation tolerance, because those characteristics determine whether the timing margin of the original design remains intact.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The SY89529LTC is an older Micrel/Microchip clock synthesizer. Compliance declarations are not stated in the available listings, so no RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is assumed.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

SY89529LTC datasheet SY89529LTC pinout SY89529LTC datasheet pdf SY89529LTC equivalent SY89529LTC replacement SY89529LTC cross reference SY89529LTC footprint SY89529LTC application circuit SY89529LTC 200MHz clock SY89529LTC 32-TQFP Microchip SY89529LTC SY89529LTC price

Related Components & Terms

Microchip Technology Micrel Semiconductor SY89529LTC SY89529LZC SY89530LTC precision spread-spectrum clock synthesizer clock synthesizer phase-locked loop PLL LVPECL LVTTL LVCMOS spread-spectrum modulation electromagnetic interference EMI reduction 200 MHz output clock 16.66 MHz crystal 32-TQFP TQFP package family surface-mount package clock and timing IC integrated circuit semiconductor 3.3 V power supply
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details