SY89529LTC - 200MHz Spread-Spectrum Clock | Microchip Technology
MPN: SY89529LTC ✗ סוף ייצורSY89529LTC סקירה
A clock synthesizer is a timing IC that uses a frequency reference, typically a crystal oscillator, to generate one or more stable clock outputs. Clock synthesizers form part of the clock and timing hierarchy within integrated circuits and are commonly used to supply deterministic reference frequencies to processors, communications equipment, storage controllers, and test systems. The SY89529LTC combines a precision phase-locked loop with spread-spectrum modulation in a single surface-mount package.
The principal features of this clock synthesizer are its 200 MHz maximum output frequency, 16.66 MHz crystal reference input, 3.3 V low-voltage supply operation, and selectable 0.5% spread-spectrum modulation. The LVPECL output is suited to high-speed digital interconnect, while the LVTTL and LVCMOS-compatible capability broadens its usefulness across mixed-signal and legacy digital systems. A surface-mount 32-TQFP package supports compact assembly on multilayer printed circuit boards.
Technically, the SY89529LTC multiplies the 16.66 MHz reference to produce a 200 MHz clock while adding controlled frequency dither through spread-spectrum modulation. This technique deliberately distributes clock energy across a frequency band rather than concentrating it around one carrier frequency. The result can reduce narrowband electromagnetic emissions and improve system-level EMI margin. The 0.5% modulation setting should be evaluated against receiver timing requirements and downstream jitter specifications because the frequency excursion also creates additional timing uncertainty.
Typical uses include high-speed communications equipment, industrial control systems, network interface modules, storage systems, and clock-distribution trees for FPGA or ASIC-based designs. Its 200 MHz LVPECL output is especially relevant when the receiving logic requires a differential high-speed clock. It may also be used in test and measurement equipment that needs a precise reference clock with adjustable spectral spreading.
When laying out the circuit, place the crystal, decoupling capacitors, clock output components, and termination network according to the manufacturer datasheet. Keep the reference oscillator path short, provide clean ground returns, and use termination appropriate to the LVPECL interface. Validate both spread-spectrum enabled and disabled operation across the required temperature range because the modulation envelope changes the instantaneous output frequency.
This product page combines the manufacturer-family characteristics, verified distributor listing information, application guidance, and pin-compatible replacement criteria in one place. It also distinguishes documented specifications from parameters that require confirmation from the datasheet, helping engineers evaluate the SY89529LTC for new clock-tree, EMI-control, and high-speed digital-interface designs.
חלופות תחליף ישיר עבור SY89529LTC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותSY89529LTC מפרטים
| Product Type | Precision spread-spectrum clock synthesizer |
| מתח אספקה | 3.3 V nominal |
| Maximum Output Frequency | 200 MHz |
| Crystal Reference Frequency | 16.66 MHz |
| סוג פלט | LVPECL |
| Spread-Spectrum Modulation Control | 0.5% |
| EMI Reduction | Greater than 7 dB |
| Compatible Logic Levels | LVTTL and LVCMOS |
| PLL | Yes |
| Input to Output Ratio | 12:1 at 16.66 MHz to 200 MHz |
| טווח טמפרטורת פעולה | 0°C to 85°C |
| מארז | 32-TQFP |
| סוג הרכבה | Surface mount |
| מספר פינים | 32 pins |
| מספר יציאות | 1 output |
מדריך תצורת פינים של SY89529LTC 32-tqfp
תצורת פינים עבור SY89529LTC (מארזת 32-tqfp). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור SY89529LTC.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
SY89529LTC מתאים עבור 6 יישוםs: High-Speed Communications Clocking, FPGA and ASIC Clock Trees, Industrial Control and Data Acquisition, Network and Storage Interface Modules, Test and Measurement Equipment, EMI-Controlled Consumer Electronics.
High-Speed Communications Clocking
The SY89529LTC fits communications equipment requiring a precise 200 MHz differential reference with controlled spectral spreading. Its LVPECL output supports high-speed clock distribution, while 0.5% modulation can reduce narrowband harmonics by more than 7 dB according to the Micrel datasheet. The device operates from 3.3 V and uses a 16.66 MHz crystal, providing a practical PLL-based alternative to a dedicated high-frequency oscillator. Designers should verify line impedance, receiver thresholds, and the timing impact of modulation before release.
מומלץ
FPGA and ASIC Clock Trees
The SY89529LTC can serve as the source clock for an FPGA or ASIC clock tree when a 200 MHz LVPECL interface and reduced narrowband emissions are priorities. Its PLL-based architecture multiplies a 16.66 MHz crystal reference to the target frequency, while the spread-spectrum function distributes energy across a wider band. In a design, use short clock routes, solid ground-plane continuity, and output termination appropriate to the receiver. Confirm that the downstream PLL accommodates the 0.5% frequency excursion and associated jitter.
מומלץ
Industrial Control and Data Acquisition
The SY89529LTC is applicable to industrial controllers and data-acquisition equipment that need a stable reference clock while controlling conducted or radiated emissions. Its 3.3 V supply operation and 200 MHz LVPECL output suit compact mixed-signal systems, and the 0.5% spread-spectrum control offers an additional margin against narrowband interference. The design should preserve short return paths between the oscillator, PLL, and clock outputs. Validate clock accuracy over the 0°C to 85°C operating range and account for modulation when calculating acquisition timing budgets.
מומלץ
Network and Storage Interface Modules
The SY89529LTC can provide the 200 MHz reference used by high-speed network-interface, storage-controller, and data-transfer modules. LVPECL is useful where long PCB interconnects, multiple loads, or noisy surroundings require a robust differential clock. Spread-spectrum modulation may lower narrowband clock harmonics that couple into adjacent data lanes. Use controlled-impedance routing and matched termination, and verify that the receiving PHY or controller locks correctly with the clock frequency moving across the 0.5% modulation band.
מומלץ
Test and Measurement Equipment
The SY89529LTC suits test equipment that requires a repeatable 200 MHz timing reference with adjustable spectral spreading. The 16.66 MHz crystal reference and PLL multiplication establish the nominal output, while the 0.5% spread-spectrum mode can help suppress discrete clock lines observed on sensitive analyzers. Laboratory designs should characterize both average frequency and peak-to-peak jitter with modulation enabled. Use short crystal connections, low-inductance decoupling, and proper LVPECL biasing so measurement results are not dominated by board-level reflections or supply noise.
מומלץ
EMI-Controlled Consumer Electronics
The SY89529LTC is useful in compact consumer electronics where a high-frequency digital clock creates narrowband emissions that are difficult to suppress with filtering alone. Its spread-spectrum modulation can reduce a clock carrier by more than 7 dB, while the compact 32-TQFP package preserves board area. The implementation must still account for the PLL reference loop, crystal loading, and LVPECL output network. Confirm that downstream chips tolerate the modulated frequency and evaluate radiated emissions at the enclosure and cable-interface level.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור SY89529LTC — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Brand | Microchip Technology |
| Package | 32-TQFP |
| Device Type | Precision spread-spectrum clock synthesizer |
| Supply Voltage | 3.3 V nominal |
| Maximum Output Frequency | 200 MHz |
| Reference Frequency | 16.66 MHz crystal |
| Primary Output | LVPECL |
| Spread-Spectrum Modulation | 0.5% |
| EMI Reduction | Greater than 7 dB |
| Operating Temperature | 0°C to 85°C |
הערות תכנון
Place the 16.66 MHz crystal and its load components close to the clock-generator pins, and keep the oscillator loop away from LVPECL outputs and switching nodes. Use a continuous ground plane beneath the timing circuit and provide local 3.3 V decoupling. The manufacturer datasheet should determine crystal load capacitance, component values, and the exact ground and power-pin assignments.
Use LVPECL termination and biasing appropriate to the receiver topology rather than treating the output as a conventional LVCMOS signal. Route the differential clock over a continuous reference plane with controlled impedance, minimize stubs, and keep output circuitry away from sensitive analog inputs. Confirm the 200 MHz eye mask and the effect of 0.5% frequency spreading at the receiving device.
Spread-spectrum modulation reduces narrowband clock energy but does not eliminate broadband emissions or common-mode noise. Measure the fundamental and harmonics both with modulation enabled and disabled, and inspect cable or connector-related emissions as well as PCB radiation. Maintain short ground connections and use appropriate return vias around every decoupling capacitor.
Do not select a replacement solely because it also produces a 200 MHz clock. A drop-in device must match the 32-TQFP footprint, supply level, crystal interface, control functions, and LVPECL output behavior. Also evaluate PLL lock time, output jitter, reference sensitivity, and modulation tolerance, because those characteristics determine whether the timing margin of the original design remains intact.
מידע על תאימות
The SY89529LTC is an older Micrel/Microchip clock synthesizer. Compliance declarations are not stated in the available listings, so no RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is assumed.