Microchip Technology

SY89532LHC - 3.3V 500MHz Bus Clock Synthesizer | Microchip

MPN: SY89532LHC ✗ End of Life
3.3 V Vdss 64-EP-TQFP Package 33 MHz to 500 MHz Speed
MOQ: 1 |

SY89532LHC Overview

The Microchip SY89532LHC is a 3.3 V precision bus-clock synthesizer that generates programmable output frequencies from 33 MHz to 500 MHz and supports LVPECL and LVDS clock outputs. It combines a synthesizer with clock fanout functions in a 64-EP-TQFP surface-mount package. The device uses a crystal input and operates across the 0°C to 85°C commercial temperature range.

A programmable frequency synthesizer is a clock-and-timing integrated circuit that derives one or more deterministic output clocks from a stable reference source. Within the timing hierarchy, the SY89532LHC belongs to the clock generator and PLL family, which provides stable, phase-controlled timing for digital systems. Its LVPECL and LVDS interfaces are commonly used when a PCB requires high-speed differential clock distribution with low signal degradation.

The primary operating characteristics are a 3.3 V supply, a 33 MHz to 500 MHz programmable output range, LVPECL and LVDS output support, and a single clock/frequency-synthesis circuit. These attributes make the part suitable for communication equipment, network interfaces, server and storage systems, and industrial control electronics. The wide frequency span also allows one clock architecture to cover several system operating modes.

The SY89532LHC uses the Precision Edge approach to provide low-jitter differential clock generation and distribution. LVPECL is suited to shorter board-level links and common high-speed digital interfaces, while LVDS provides a low-voltage differential output for compatible receivers. Differential outputs reduce sensitivity to common-mode noise when routing through controlled-impedance PCB traces. The integrated synthesizer and fanout structure can simplify clock-tree design by reducing the number of separate oscillator and buffer devices.

Typical applications include processor reference clocks, network-interface timing, serial-link clock distribution, telecommunications equipment, industrial instrumentation, and data-conversion systems. A designer should select the output mode according to receiver requirements and confirm that the generated frequency, reference crystal, termination network, and decoupling satisfy the system timing budget.

Layout is critical because high-speed differential clock signals require short, symmetrical routes and proper termination. Place the reference and decoupling components close to their associated pins, use a continuous reference plane, and avoid routing outputs through noisy switching areas. Verify output amplitude, frequency accuracy, jitter, and rise/fall-time compliance with the target receiver during system validation.

This product page consolidates the verified operating range, package information, lifecycle status, sourcing information, replacement guidance, and application-focused engineering notes. It also distinguishes documented capabilities from parameters that require confirmation in the manufacturer datasheet, helping engineers plan a clock-tree design before committing the SY89532LHC to a PCB.

Drop-in alternatives for SY89532LHC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with SY89532LHC (same form factor and footprint) — differing in Mounting Type, Package.

Microchip Technology
Mounting Type: Surface mount
Package: 64-pin TQFP
Compare with SY89532LHC →

SY89533LHC

✅ Drop-In
Microchip Technology
📦 64-EP-TQFP
Programmable bus clock synthesizer · 3.3 V · 33 MHz to 500 MHz · LVPECL and LVDS · Integrated synthesizer and fanout buffers · 64-pin TQFP · Surface mount

Contact for price

View Datasheet →

SY89532LHC Specifications

Device Type Programmable bus-clock synthesizer
Supply Voltage 3.3 V
Programmable Output Frequency Range 33 MHz to 500 MHz
Clock Output Types LVPECL and LVDS
Reference Input Crystal input
Number of Circuits 1
Mounting Type SMD (SMT)
Package 64-EP-TQFP
Operating Temperature Range 0°C to 85°C
Lifecycle Status Obsolete (EOL)
Shipping Packaging Tray
Integrated Functions Integrated synthesizer and fanout buffers
Output Frequency Lower Limit 33 MHz
Output Frequency Upper Limit 500 MHz
Technology Family Precision Edge
Component Category Clock/Frequency Synthesizer

SY89532LHC 64-ep-tqfp Pin Configuration Guide

Pin configuration for SY89532LHC (64-ep-tqfp package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

64-ep-tqfp package pinout diagram for SY89532LHC

No detailed pinout data available for SY89532LHC.

Refer to the datasheet for full pin configuration.

Typical Applications

SY89532LHC is suitable for 6 applications: Network Interface Clocking, Processor Reference Clock, Telecommunications Backplane Timing, Industrial Data-Acquisition Systems, Server and Storage Interfaces, Precision Test and Measurement.

🌐

Network Interface Clocking

The SY89532LHC fits network-interface clock trees that require programmable differential clocks between 33 MHz and 500 MHz. Its LVPECL and LVDS outputs allow the clock source to be matched to compatible serializer, deserializer, PHY, or fabric-interface receivers. The integrated synthesizer and fanout buffers reduce the number of separate clock-generation stages required near the interface. Because the device operates from 3.3 V, it fits conventional 3.3 V interface domains, although each receiver's voltage threshold must be checked. A 64-EP-TQFP footprint also supports dense multilayer PCB designs. In practice, the clock frequency, reference crystal, output termination, receiver tolerance, and system jitter budget must be verified together before release to production.

🖥️

Processor Reference Clock

The SY89532LHC can provide a programmable low-jitter reference for processors, FPGAs, or complex digital controllers that accept LVPECL or LVDS clock inputs. Its 33 MHz to 500 MHz output span covers reference-clock requirements commonly encountered in communications and compute platforms. Integrating synthesis with fanout buffers allows one reference oscillator to serve several clock domains while limiting board area. The 3.3 V operating requirement must agree with the receiving device's clock-input supply domain, and the exposed thermal pad requires adequate PCB copper and a controlled assembly process. Engineers should confirm input capacitance, maximum clock slew, jitter tolerance, and reset or sequencing requirements of the target processor before using the SY89532LHC.

🏭

Telecommunications Backplane Timing

The SY89532LHC is appropriate for telecommunications backplanes and line-card subsystems that distribute programmable differential clocks to multiple high-speed blocks. LVPECL provides a familiar high-speed clock option for compatible backplane receivers, while LVDS can be selected where receiver voltage levels and impedance requirements allow it. The 33 MHz to 500 MHz range supports common line-card reference frequencies and internal fabric timing. Robust implementation depends on controlled-impedance routing, symmetrical differential geometry, continuous return paths, and receiver-side or source-side termination selected according to the clock architecture. Because this SY89532LHC is obsolete, an ongoing telecommunications design should verify lifecycle risk and assess a supported family member before production release.

⚡

Industrial Data-Acquisition Systems

The SY89532LHC can organize timing in an industrial data-acquisition system that combines high-speed converters, digital signal processors, and communications blocks. A programmable clock from 33 MHz to 500 MHz allows sampling and transfer rates to be coordinated without using a separate oscillator for each operating mode. The LVPECL and LVDS outputs support modern high-speed receivers, while the integrated fanout section can distribute the selected clock locally. The commercial 0°C to 85°C operating range covers many indoor industrial environments, but enclosure temperature and reliability requirements still apply. Keep the reference oscillator and power decoupling away from analog and switching sections, and validate clock-to-data timing across every supported sampling rate.

🖥️

Server and Storage Interfaces

The SY89532LHC is applicable to legacy server and storage interfaces requiring a compact, programmable differential clock source. Its integrated synthesizer and fanout buffers can support clock distribution to interface controllers, converters, and fabric logic without relying on several separate clock components. The 64-EP-TQFP package provides a high pin count suitable for multiple differential outputs and supply connections, while the exposed pad assists heat transfer when the device operates at elevated ambient temperature. Nevertheless, server-product programs normally require active lifecycle and long-term supply commitments. For a new server or storage platform, the obsolete status of the SY89532LHC should be resolved through Microchip's cross-reference process or a complete redesign using a currently supported clock generator.

🔧

Precision Test and Measurement

The SY89532LHC can serve precision test and measurement equipment that needs several related differential clocks generated from one stable reference. Programmability allows an instrument to change its clock frequency as measurement ranges or sampling modes change, while LVPECL and LVDS outputs support different acquisition or comparator stages. The 33 MHz to 500 MHz range is suitable for many digitizers, signal generators, and timing modules, subject to each receiver's requirements. In a laboratory instrument, low phase noise and deterministic edge quality can be as important as frequency accuracy, so the reference source and loop filter must be evaluated carefully. Differential trace symmetry, output termination, and isolation from switching power converters are central to preserving timing quality.

What is the operating frequency range of the SY89532LHC?
The SY89532LHC generates programmable output frequencies from 33 MHz to 500 MHz. The manufacturer datasheet identifies the device as a 3.3 V precision bus-clock synthesizer with LVPECL and LVDS outputs. This broad range allows the same device to address multiple clock domains, provided the selected reference and PLL settings support the required output frequency.
What type of clock generator is the SY89532LHC?
The SY89532LHC is a programmable bus-clock synthesizer with integrated fanout buffers. According to the Micrel manufacturer datasheet, it uses a crystal input and provides LVPECL and LVDS differential outputs from 33 MHz to 500 MHz. It therefore combines frequency synthesis and clock distribution rather than operating only as a fixed-frequency buffer.
Which clock output standards does the SY89532LHC support?
The SY89532LHC supports LVPECL and LVDS differential clock outputs. According to the Micrel manufacturer datasheet, the device operates from a 3.3 V supply and covers output frequencies from 33 MHz to 500 MHz. The output mode must match the receiver's voltage, termination, and impedance requirements.
Is the SY89532LHC obsolete or still active?
The SY89532LHC is listed as obsolete (EOL). A product listing for the exact MPN reports its status as Obsolete (EOL), so it should not be assumed to be in active production. Designs should account for lifecycle risk and evaluate a supported replacement or a board-level redesign.
Where can I download the SY89532LHC datasheet PDF?
The official SY89532-33L datasheet PDF is available on Microchip's website at https://ww1.microchip.com/downloads/en/DeviceDoc/sy89532-33l.pdf. It covers the SY89532L and SY89533L devices, including their frequency-synthesis and differential-output functions. Use the manufacturer document for authoritative pin assignments, electrical limits, and application details.
Where can I find the SY89532LHC pinout and package details?
The SY89532LHC is identified as a 64-EP-TQFP surface-mount device, and its complete pin assignment is documented in the manufacturer datasheet. Use the pin-description table and package drawing in the SY89532-33L datasheet when assigning PCB nets. Do not infer exposed-pad connections or differential-output pin pairs from another package variant.
What is the power supply requirement for the SY89532LHC?
The SY89532LHC operates from a 3.3 V supply. The Micrel manufacturer datasheet describes the part as a 3.3 V precision clock synthesizer. Designers should still follow the datasheet's separate supply, ground, and decoupling requirements because the device contains high-speed differential clock outputs.
Can the SY89532LHC be used for network-interface clocking?
Yes, the SY89532LHC is suitable for network-interface clocking when the receiver supports LVPECL or LVDS and the selected output remains within 33 MHz to 500 MHz. Its integrated synthesizer and fanout functions can support multiple related clock outputs. Validate the frequency plan, jitter budget, and trace topology against the target interface.
Is the SY89532LHC suitable for industrial control systems?
The SY89532LHC can suit industrial control systems that operate within its specified 0°C to 85°C range. Its programmable 33 MHz to 500 MHz LVPECL or LVDS outputs support high-speed digital timing. Industrial suitability must also be established from the complete electrical limits and system-environment requirements.
What is the best drop-in replacement for the SY89532LHC?
No verified cross-manufacturer drop-in replacement can be established from the available cross-reference information. The closest documented same-family candidate is the SY89533LHC, which appears in the shared SY89532-33L manufacturer datasheet. Before treating it as a drop-in, confirm pin-to-pin compatibility, output configuration, frequency range, supply voltage, package, and lifecycle requirements.
Can SY89533LHC replace SY89532LHC?
The SY89533LHC is a same-family candidate, but it should not be treated as a guaranteed drop-in replacement without a detailed comparison. The shared manufacturer datasheet documents both devices, yet the available material does not fully expose their individual output configurations and pin-level differences. Review the complete electrical tables and application circuits before substitution.
What can replace the obsolete SY89532LHC?
The SY89533LHC is the principal documented same-family starting point for an obsolete SY89532LHC design. A final replacement decision requires confirmation of package, pin mapping, reference input, PLL programming, output standard, frequency range, and operating temperature range. Use Microchip's cross-reference search for additional supported options or request a sourcing assessment for the exact obsolete MPN.
When should I choose the SY89532LHC instead of a generic clock oscillator?
Choose the SY89532LHC when a design needs programmable synthesis rather than one fixed frequency. Its 33 MHz to 500 MHz range, integrated fanout buffers, and LVPECL or LVDS outputs suit multi-rate clock trees. A simple crystal oscillator is more appropriate when only one fixed low-frequency reference is required and differential fanout is unnecessary.
Where can I buy the SY89532LHC and what is its current price?
Use the Request a Quote form on this page to ask for current SY89532LHC availability, unit pricing, minimum order quantity, and lead time. The device is listed as obsolete, so inventory and sourcing conditions can change. Current commercial terms should be confirmed directly before committing a production order.
How long is the lead time for the obsolete SY89532LHC?
The current lead time for the obsolete SY89532LHC should be requested through the Request a Quote form on this page. Because the device is listed as obsolete (EOL), lead time depends on remaining factory inventory, authorized-channel availability, and lot traceability. A quantity-specific quote is required before making a schedule commitment.
Is the SY89532LHC currently in stock?
Current stock for the obsolete SY89532LHC should be confirmed through the Request a Quote form on this page. Its obsolete status means that standard active-production assumptions do not apply. Provide the required quantity, date code, and traceability requirements with the request so the available supply can be matched appropriately.
What are the key specifications engineers should know about the SY89532LHC?
The key SY89532LHC specifications are a 3.3 V supply, programmable output from 33 MHz to 500 MHz, LVPECL and LVDS differential outputs, crystal reference input, and a 64-EP-TQFP package. The device operates from 0°C to 85°C and is listed as obsolete. These figures define its core clock-tree role and sourcing constraints.
Is the SY89532LHC RoHS compliant?
The RoHS status of the exact obsolete SY89532LHC is not established by the available manufacturer information. Request the current material declaration or product-change documentation from Microchip or an authorized source before using the part in a new RoHS-controlled design. Compliance should not be inferred solely from the device's date, package, or category.

Engineering reference data for SY89532LHC — comparison, design guidance, and compliance information.

Selection Guide

Choose the SY89532LHC only for a legacy or otherwise justified design that requires a 3.3 V programmable clock synthesizer with crystal reference, integrated fanout, and LVPECL or LVDS outputs from 33 MHz to 500 MHz. The 64-EP-TQFP package and obsolete status are the main constraints: confirm that the original PCB footprint, exposed-pad treatment, reference circuit, and output assignments are fixed and that remaining supply can be secured. Consider SY89533LHC when its individual electrical and pin functions meet the design, but verify it rather than assuming a generic drop-in relationship. For new products, prioritize a currently supported clock generator with an explicit Microchip lifecycle statement. Use the cross-reference process or request a sourcing review when component continuity, exact pin compatibility, and long-term traceability are required.

Comparison with Alternatives

Parameter This Product SY89533LHC
Brand Microchip Technology Microchip Technology
Package 64-EP-TQFP 64-EP-TQFP
Device Type Programmable bus-clock synthesizer Clock/frequency synthesizer
Supply Voltage 3.3 V 3.3 V

Key Differentiators

  • Programmable output covers a broad frequency range (vs SY89533LHC)
  • Combines synthesis and differential fanout (vs SY89533LHC)
  • Single 3.3 V clock-domain integration (vs SY89533LHC)

Design Notes

Route every LVPECL or LVDS output as a short, length-matched differential pair with a continuous reference plane beneath the pair. Keep the clock receiver termination close to the receiving device, avoid stubs, and do not route clock signals across power-plane splits. Differential symmetry limits timing skew and helps preserve the intended output amplitude.

Place the 3.3 V decoupling network directly beside the supply and ground pins, following the connection and capacitor values in the manufacturer datasheet. Provide a low-impedance ground path for the clock outputs and preserve the exposed-pad connection under the 64-EP-TQFP package. Verify the resulting rail noise and output jitter on the assembled board.

Do not assume that LVPECL and LVDS outputs are interchangeable with the receiver. Confirm output voltage levels, termination method, trace impedance, operating frequency, and input capacitance at the receiver. Also treat the obsolete lifecycle status as a production risk: a prototype fit does not guarantee long-term availability or an unchanged bill of materials.

Validate differential eye quality, differential voltage, jitter, and inter-pair skew with a high-bandwidth measurement setup at the intended operating frequency. Probe resonances, return-path discontinuities, and connector transitions can be more damaging than nominal source jitter. Test each supported frequency because divider ratios, reference multiplication, and output loading can affect edge quality.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact compliance status of the obsolete SY89532LHC is not established by the available manufacturer information. AEC-Q100 is treated as not applicable because the device is a commercial clock synthesizer rather than an automotive-qualified product.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

SY89532LHC datasheet SY89532LHC datasheet pdf SY89532LHC pinout SY89532LHC equivalent SY89532LHC replacement SY89532LHC drop-in replacement SY89532LHC price SY89532LHC stock Microchip SY89532LHC SY89532LHC 500MHz SY89532LHC LVPECL LVDS SY89532LHC 64-EP-TQFP SY89532LHC vs SY89533LHC SY89532LHC application circuit SY89532LHC clock synthesizer

Related Components & Terms

Microchip Technology Micrel Semiconductor SY89532LHC SY89533LHC programmable clock synthesizer clock generator PLL clock and timing IC frequency synthesizer clock fanout buffer Precision Edge LVPECL LVDS differential clock 3.3 V power supply 33 MHz 500 MHz crystal oscillator clock jitter 64-EP-TQFP TQFP package surface-mount technology network interface industrial control obsolete lifecycle status
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details