SY89532LHC - 3.3V 500MHz Bus Clock Synthesizer | Microchip
부품 번호: SY89532LHC ✗ 단종SY89532LHC 개요
A programmable frequency synthesizer is a clock-and-timing integrated circuit that derives one or more deterministic output clocks from a stable reference source. Within the timing hierarchy, the SY89532LHC belongs to the clock generator and PLL family, which provides stable, phase-controlled timing for digital systems. Its LVPECL and LVDS interfaces are commonly used when a PCB requires high-speed differential clock distribution with low signal degradation.
The primary operating characteristics are a 3.3 V supply, a 33 MHz to 500 MHz programmable output range, LVPECL and LVDS output support, and a single clock/frequency-synthesis circuit. These attributes make the part suitable for communication equipment, network interfaces, server and storage systems, and industrial control electronics. The wide frequency span also allows one clock architecture to cover several system operating modes.
The SY89532LHC uses the Precision Edge approach to provide low-jitter differential clock generation and distribution. LVPECL is suited to shorter board-level links and common high-speed digital interfaces, while LVDS provides a low-voltage differential output for compatible receivers. Differential outputs reduce sensitivity to common-mode noise when routing through controlled-impedance PCB traces. The integrated synthesizer and fanout structure can simplify clock-tree design by reducing the number of separate oscillator and buffer devices.
Typical applications include processor reference clocks, network-interface timing, serial-link clock distribution, telecommunications equipment, industrial instrumentation, and data-conversion systems. A designer should select the output mode according to receiver requirements and confirm that the generated frequency, reference crystal, termination network, and decoupling satisfy the system timing budget.
Layout is critical because high-speed differential clock signals require short, symmetrical routes and proper termination. Place the reference and decoupling components close to their associated pins, use a continuous reference plane, and avoid routing outputs through noisy switching areas. Verify output amplitude, frequency accuracy, jitter, and rise/fall-time compliance with the target receiver during system validation.
This product page consolidates the verified operating range, package information, lifecycle status, sourcing information, replacement guidance, and application-focused engineering notes. It also distinguishes documented capabilities from parameters that require confirmation in the manufacturer datasheet, helping engineers plan a clock-tree design before committing the SY89532LHC to a PCB.
드롭인 대체품: SY89532LHC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: SY89532LHC (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, Package.
SY89533LHC
✅ 드롭인가격 문의
데이터시트 보기 →SY89532LHC 사양
| Device Type | Programmable bus-clock synthesizer |
| 공급 전압 | 3.3 V |
| Programmable Output Frequency Range | 33 MHz to 500 MHz |
| Clock Output Types | LVPECL and LVDS |
| Reference Input | Crystal input |
| Number of Circuits | 1 |
| 실장 유형 | SMD (SMT) |
| 패키지 | 64-EP-TQFP |
| 동작 온도 범위 | 0°C to 85°C |
| 수명 주기 상태 | Obsolete (EOL) |
| Shipping Packaging | Tray |
| Integrated Functions | Integrated synthesizer and fanout buffers |
| Output Frequency Lower Limit | 33 MHz |
| Output Frequency Upper Limit | 500 MHz |
| Technology Family | Precision Edge |
| Component Category | Clock/Frequency Synthesizer |
SY89532LHC 64-ep-tqfp 핀 구성 가이드
SY89532LHC(64-ep-tqfp 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: SY89532LHC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
SY89532LHC 적합 용도: 6 애플리케이션s: Network Interface Clocking, Processor Reference Clock, Telecommunications Backplane Timing, Industrial Data-Acquisition Systems, Server and Storage Interfaces, Precision Test and Measurement.
Network Interface Clocking
The SY89532LHC fits network-interface clock trees that require programmable differential clocks between 33 MHz and 500 MHz. Its LVPECL and LVDS outputs allow the clock source to be matched to compatible serializer, deserializer, PHY, or fabric-interface receivers. The integrated synthesizer and fanout buffers reduce the number of separate clock-generation stages required near the interface. Because the device operates from 3.3 V, it fits conventional 3.3 V interface domains, although each receiver's voltage threshold must be checked. A 64-EP-TQFP footprint also supports dense multilayer PCB designs. In practice, the clock frequency, reference crystal, output termination, receiver tolerance, and system jitter budget must be verified together before release to production.
추천
Processor Reference Clock
The SY89532LHC can provide a programmable low-jitter reference for processors, FPGAs, or complex digital controllers that accept LVPECL or LVDS clock inputs. Its 33 MHz to 500 MHz output span covers reference-clock requirements commonly encountered in communications and compute platforms. Integrating synthesis with fanout buffers allows one reference oscillator to serve several clock domains while limiting board area. The 3.3 V operating requirement must agree with the receiving device's clock-input supply domain, and the exposed thermal pad requires adequate PCB copper and a controlled assembly process. Engineers should confirm input capacitance, maximum clock slew, jitter tolerance, and reset or sequencing requirements of the target processor before using the SY89532LHC.
추천
Telecommunications Backplane Timing
The SY89532LHC is appropriate for telecommunications backplanes and line-card subsystems that distribute programmable differential clocks to multiple high-speed blocks. LVPECL provides a familiar high-speed clock option for compatible backplane receivers, while LVDS can be selected where receiver voltage levels and impedance requirements allow it. The 33 MHz to 500 MHz range supports common line-card reference frequencies and internal fabric timing. Robust implementation depends on controlled-impedance routing, symmetrical differential geometry, continuous return paths, and receiver-side or source-side termination selected according to the clock architecture. Because this SY89532LHC is obsolete, an ongoing telecommunications design should verify lifecycle risk and assess a supported family member before production release.
추천
Industrial Data-Acquisition Systems
The SY89532LHC can organize timing in an industrial data-acquisition system that combines high-speed converters, digital signal processors, and communications blocks. A programmable clock from 33 MHz to 500 MHz allows sampling and transfer rates to be coordinated without using a separate oscillator for each operating mode. The LVPECL and LVDS outputs support modern high-speed receivers, while the integrated fanout section can distribute the selected clock locally. The commercial 0°C to 85°C operating range covers many indoor industrial environments, but enclosure temperature and reliability requirements still apply. Keep the reference oscillator and power decoupling away from analog and switching sections, and validate clock-to-data timing across every supported sampling rate.
추천
Server and Storage Interfaces
The SY89532LHC is applicable to legacy server and storage interfaces requiring a compact, programmable differential clock source. Its integrated synthesizer and fanout buffers can support clock distribution to interface controllers, converters, and fabric logic without relying on several separate clock components. The 64-EP-TQFP package provides a high pin count suitable for multiple differential outputs and supply connections, while the exposed pad assists heat transfer when the device operates at elevated ambient temperature. Nevertheless, server-product programs normally require active lifecycle and long-term supply commitments. For a new server or storage platform, the obsolete status of the SY89532LHC should be resolved through Microchip's cross-reference process or a complete redesign using a currently supported clock generator.
추천
Precision Test and Measurement
The SY89532LHC can serve precision test and measurement equipment that needs several related differential clocks generated from one stable reference. Programmability allows an instrument to change its clock frequency as measurement ranges or sampling modes change, while LVPECL and LVDS outputs support different acquisition or comparator stages. The 33 MHz to 500 MHz range is suitable for many digitizers, signal generators, and timing modules, subject to each receiver's requirements. In a laboratory instrument, low phase noise and deterministic edge quality can be as important as frequency accuracy, so the reference source and loop filter must be evaluated carefully. Differential trace symmetry, output termination, and isolation from switching power converters are central to preserving timing quality.
추천
엔지니어링 참조 데이터: SY89532LHC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SY89533LHC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-EP-TQFP | 64-EP-TQFP |
| Device Type | Programmable bus-clock synthesizer | Clock/frequency synthesizer |
| Supply Voltage | 3.3 V | 3.3 V |
주요 차별점
- Programmable output covers a broad frequency range (vs SY89533LHC)
- Combines synthesis and differential fanout (vs SY89533LHC)
- Single 3.3 V clock-domain integration (vs SY89533LHC)
설계 노트
Route every LVPECL or LVDS output as a short, length-matched differential pair with a continuous reference plane beneath the pair. Keep the clock receiver termination close to the receiving device, avoid stubs, and do not route clock signals across power-plane splits. Differential symmetry limits timing skew and helps preserve the intended output amplitude.
Place the 3.3 V decoupling network directly beside the supply and ground pins, following the connection and capacitor values in the manufacturer datasheet. Provide a low-impedance ground path for the clock outputs and preserve the exposed-pad connection under the 64-EP-TQFP package. Verify the resulting rail noise and output jitter on the assembled board.
Do not assume that LVPECL and LVDS outputs are interchangeable with the receiver. Confirm output voltage levels, termination method, trace impedance, operating frequency, and input capacitance at the receiver. Also treat the obsolete lifecycle status as a production risk: a prototype fit does not guarantee long-term availability or an unchanged bill of materials.
Validate differential eye quality, differential voltage, jitter, and inter-pair skew with a high-bandwidth measurement setup at the intended operating frequency. Probe resonances, return-path discontinuities, and connector transitions can be more damaging than nominal source jitter. Test each supported frequency because divider ratios, reference multiplication, and output loading can affect edge quality.
규정 준수 정보
The exact compliance status of the obsolete SY89532LHC is not established by the available manufacturer information. AEC-Q100 is treated as not applicable because the device is a commercial clock synthesizer rather than an automotive-qualified product.