Texas Instruments

TLV2462QD - Dual RRIO 6.4MHz Op Amp | Texas Instruments

MPN: TLV2462QD ✓ Active
500 µA/channel Vdss 8-pin SOIC Package
MOQ: 1 |

TLV2462QD Overview

Texas Instruments TLV2462QD is a dual, low-power operational amplifier with rail-to-rail input and output capability, a 6.4 MHz gain-bandwidth product, and a 6 V maximum supply rating. The device is packaged in an 8-pin SOIC and is designed for portable applications where two amplifier channels are needed within a compact, low-power circuit.

An operational amplifier is a voltage-gain component used to amplify small signals, buffer voltage sources, compare analog thresholds, and support feedback-based signal conditioning. The TLV2462 belongs to the operational-amplifier, analog-signal-conditioning, and power-management-IC hierarchy. Rail-to-rail input capability allows the amplifier to accept input voltages near the supply rails, while rail-to-rail output capability supports operation with limited output-voltage headroom.

The TLV2462QD provides two amplifier channels in one package, reducing board area compared with separate single-channel devices. Its 6.4 MHz gain-bandwidth product supports signal paths requiring moderate bandwidth, and its specified 80 mA output-drive capability is useful for driving moderate loads. The manufacturer describes the family as low power, with a quoted supply current of 500 µA per channel, making it applicable to portable instrumentation and other compact battery-operated systems.

Both channels share the same supply pins, but each channel can be configured independently as an amplifier, buffer, comparator, or active-filter element. The common package and dual-channel organization also simplify power distribution and reduce the number of external components required for dual-signal conditioning. Configuration depends on the feedback network, input impedance, source impedance, output loading, and required stability.

Typical uses include portable sensor interfaces, low-level analog signal amplification, voltage buffering, threshold detection, audio preamplification, and general-purpose analog conditioning. The 6 V rating supports low-voltage systems, while the 8-pin SOIC package allows conventional surface-mount assembly. Care is still required when operating near the supply rails, driving capacitive loads, or selecting feedback values for stable closed-loop response.

For design planning, verify the complete electrical limits and pin assignments in the manufacturer datasheet before layout release. Decoupling capacitors should be placed close to the supply pins, input and output routing should minimize parasitic capacitance, and unused amplifier inputs must be tied to a defined potential rather than left floating. This page combines package, performance, application, and replacement guidance to support early design decisions.

Drop-in alternatives for TLV2462QD — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with TLV2462QD (same form factor and footprint) — differing in Amplifier Type, Package, Input Common-Mode Range, Output Swing, RoHS Status.

Texas Instruments
Amplifier Type: Dual operational amplifier
Package: SOIC-8 (D)
Input Common-Mode Range: Rail-to-rail
Compare with TLV2462QD →
Texas Instruments
Amplifier Type: Dual operational amplifier
Input Common-Mode Range: Rail-to-rail input
Output Swing: Rail-to-rail output
Compare with TLV2462QD →

TLV2462ID

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 8-pin SOIC
Dual operational amplifier · 2 circuits · 6.4 MHz · 1.6 V/µs · 6 V · Rail-to-rail input · Rail-to-rail output

Contact for price

View Datasheet →

TLV2462CD

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 8-pin SOIC
Dual operational amplifier · 2 channels · 6.4 MHz · 1.6 V/µs · 500 µA per channel · 80 mA · Rail-to-rail · Rail-to-rail

Contact for price

View Datasheet →

TLV2462QDRG4Q1

✅ Drop-In
📦 8-pin SOIC
Same TLV2462-Q1 family with AEC-Q100 qualification; the RG4 ordering option differs from the base Q suffix while key electrical ratings remain equivalent.

📋 Reference alternative (not in catalog)

TLV2462IP

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin SOIC
Same TLV2462 family and key ratings; the I-grade ordering suffix replaces the Q-grade qualification class, a 1-of-3 grade-class difference.

📋 Reference alternative (not in catalog)

TLV2462CP

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin SOIC
Same TLV2462 family and key ratings; the C-grade ordering suffix replaces the Q-grade qualification class, a 1-of-3 grade-class difference.

📋 Reference alternative (not in catalog)

TLV2462QD Maximum Ratings & Electrical Characteristics

Amplifier Type Operational Amplifier
Number of Channels 2 channels
Topology Dual
Rail-to-Rail Input Yes
Rail-to-Rail Output Yes
Gain-Bandwidth Product 6.4 MHz
Output Drive Capability 80 mA
Supply Current 500 µA/channel
Maximum Supply Voltage 6 V
Package 8-pin SOIC
Mounting Type Surface Mount
Automotive Qualification AEC-Q100

TLV2462QD 8-pin soic Pin Configuration Guide

Pin configuration for TLV2462QD (8-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin soic package pinout diagram for TLV2462QD

No detailed pinout data available for TLV2462QD.

Refer to the datasheet for full pin configuration.

Typical Applications

TLV2462QD is suitable for 6 applications: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Audio Preamplification, Threshold and Comparator Circuits, Low-Voltage Active Filtering, Automotive Low-Voltage Analog Interface.

📱

Portable Sensor Signal Conditioning

The TLV2462QD fits portable sensor-conditioning circuits because it combines two rail-to-rail operational-amplifier channels, a 6.4 MHz gain-bandwidth product, and 500 µA supply current per channel. One channel can amplify a low-level sensor signal while the other provides buffering or threshold detection. Place each device close to the sensor interface, use short feedback paths, and include local supply bypassing to limit noise pickup. Rail-to-rail input and output operation is especially useful when the measured signal approaches a supply rail, although the selected gain, source impedance, and output loading must satisfy the amplifier's stability and common-mode limits.

🔋

Battery-Powered Instrumentation

The TLV2462QD is appropriate for compact, battery-powered measurement equipment where two analog channels are required without the board area of separate single amplifiers. Its quoted 500 µA supply current per channel and dual-channel 8-pin SOIC package support power- and space-conscious designs. The 6.4 MHz gain-bandwidth product provides useful signal bandwidth for sensor signals and low-frequency instrumentation. Designers should account for the complete amplifier supply current, reference-circuit demand, sensor current, and output activity when calculating battery life, while using the enable or shutdown strategy described in the family documentation if the final platform includes that function.

🎧

Audio Preamplification

The dual-channel TLV2462QD can support stereo or dual-channel low-level audio preamplification where rail-to-rail operation and a 6.4 MHz gain-bandwidth product are valuable. The stated 80 mA output-drive capability provides margin for moderate source and load conditions, but the external audio source impedance and capacitive load determine the practical response. Use balanced feedback values, keep input traces away from supply and output routes, and verify output swing against the required signal amplitude. Because the device is a general-purpose operational amplifier rather than an audio-specific part, system-level noise, distortion, and stability requirements should be confirmed through the family datasheet and prototype measurements.

⚡

Threshold and Comparator Circuits

The TLV2462QD can implement two threshold-detection channels by applying feedback or positive feedback to create comparator-like behavior. Rail-to-rail input and output capability increases usable signal range in low-voltage systems, while the 6.4 MHz gain-bandwidth product supports signals beyond the audio band. Layout remains important even in a slow threshold circuit because high gain can amplify high-frequency noise or cause output transitions to interact with parasitic capacitance. Keep the reference network stable, connect the unused input channel to a defined common-mode potential, and validate output logic levels and transition behavior in the intended supply range before treating the amplifier as a logic comparator.

🎚️

Low-Voltage Active Filtering

The dual TLV2462QD is well suited to low-voltage active-filter and active-filter-adjacent designs that need moderate bandwidth and flexible gain setting. Its 6.4 MHz gain-bandwidth product provides the closed-loop bandwidth required for many low-frequency filter stages, while the dual package simplifies implementation of paired pole or signal-path functions. Component tolerances, amplifier noise, input bias current, and output loading can alter filter behavior. Keep the two channels in thermally and spatially similar conditions when matching matters, use short feedback paths, and check stability with the intended source and load. Follow the manufacturer’s recommended application circuits when reproducing established filter topologies.

🚗

Automotive Low-Voltage Analog Interface

The TLV2462QD is suitable for low-voltage automotive analog interfaces because the Q suffix denotes an automotive-qualified ordering option and the device provides two rail-to-rail amplifier channels in an 8-pin SOIC package. Its 6 V maximum supply rating and 6.4 MHz gain-bandwidth product fit many sensor, control, and signal-conditioning blocks. Automotive implementation must also satisfy the complete TLV2462-Q1 qualification requirements rather than relying only on the suffix. Validate transient immunity, input protection, grounding, noise behavior, and operating temperature against the vehicle platform requirements, and use the manufacturer’s automotive qualification documentation for production release.

Recommended Products Summary

TLV2462ID Texas Instruments Used in: Portable Sensor Signal Conditioning, Audio Preamplification TLV2462CP Same-family dual operational-amplifier grade Used in: Battery-Powered Instrumentation TLV2462QDRG4Q1 Automotive-qualified same-family alternative Used in: Threshold and Comparator Circuits, Automotive Low-Voltage Analog Interface TLV2462CD Texas Instruments Used in: Low-Voltage Active Filtering
What is the TLV2462QD?
The TLV2462QD is a Texas Instruments dual operational amplifier with rail-to-rail input and output operation. It combines two amplifier channels in an 8-pin SOIC package and is specified for low-power portable applications. According to the Texas Instruments TLV2462 product page, the device is a dual, low-power amplifier with a 6.4 MHz gain-bandwidth product and 500 µA supply current per channel.
Where can I download the TLV2462 datasheet PDF?
The official TLV2462 documentation is available through the Texas Instruments product page at https://www.ti.com/product/TLV2462. That page contains the family datasheet, ordering information, device parameters, and application information. For design sign-off, use the pin-description table, recommended operating conditions, electrical characteristics, and package drawings in the manufacturer datasheet.
What are the key specifications of TLV2462QD engineers should know?
The key TLV2462QD specifications are two amplifier channels, rail-to-rail input and output operation, a 6.4 MHz gain-bandwidth product, 80 mA output-drive capability, 500 µA supply current per channel, and a 6 V maximum supply rating. Texas Instruments identifies the family as a low-power operational-amplifier family intended for portable applications, with the qualified version supplied in an 8-pin SOIC package.
Where can I find the TLV2462QD pinout?
The TLV2462QD pin assignment is shown in the pin-configuration section of the Texas Instruments TLV2462 datasheet. The device uses an 8-pin SOIC package and contains two operational-amplifier channels with common supply connections. Use the package drawing to confirm physical orientation before assigning PCB traces, particularly when the board layout is created from a generic dual-op-amp footprint.
What is the operating voltage of TLV2462QD?
The TLV2462QD is specified for operation from single or dual supplies with a maximum total supply rating of 6 V. Its rail-to-rail input and output characteristics are intended for low-voltage portable systems. Confirm minimum supply voltage, input range, and output-swing limits in the TLV2462 electrical-characteristics table before finalizing a rail-to-rail signal chain.
How fast is the TLV2462QD?
The TLV2462QD has a 6.4 MHz gain-bandwidth product. This specification indicates useful closed-loop bandwidth above the audio range when appropriate feedback and gain settings are selected. The manufacturer datasheet should be consulted for slew rate, output swing, and stability conditions because bandwidth alone does not define the usable response at every output voltage and load.
Is TLV2462QD suitable for portable applications?
Yes, the TLV2462QD is suitable for portable applications because Texas Instruments specifies it as a low-power, rail-to-rail dual operational amplifier with 500 µA supply current per channel. Its two channels reduce component count, while its 8-pin SOIC package supports compact surface-mount layouts. Battery life also depends on the selected operating voltage, output activity, load, and system-level power behavior.
What can replace the TLV2462QD?
The closest same-family drop-in choices are the other temperature and qualification versions of TLV2462 in the 8-pin SOIC package, including TLV2462ID, TLV2462CD, TLV2462QDRG4Q1, TLV2462IP, and TLV2462CP. Before substitution, confirm the required temperature grade, automotive qualification, ordering suffix, and every electrical limit. Cross-brand alternatives require separate pin and parameter validation.
Is TLV2462QD the same as TLV9062?
No. The TLV9062 is a different Texas Instruments dual operational-amplifier family with upgraded functionality, as identified by the manufacturer’s TLV2462 product page. Although the TLV9062 is described as a drop-in replacement candidate, its exact package variant, electrical limits, supply range, bandwidth, and shutdown configuration must be checked against the specific 8-pin SOIC footprint before it is treated as an exact substitution.
TLV2462QD vs TLV2462ID: which is better for an industrial design?
Choose TLV2462ID when its specified temperature grade and electrical limits satisfy the industrial operating environment; choose TLV2462QD when automotive qualification and the Q suffix requirements are needed. Both are members of the same dual, low-power, rail-to-rail amplifier family, but the suffix controls qualification and ordering characteristics. Review the manufacturer ordering table before selecting the final grade.
When should I choose TLV2462QD over another dual operational amplifier?
Choose TLV2462QD when the design needs two rail-to-rail amplifier channels, a 6.4 MHz gain-bandwidth product, low-power operation, and an automotive-qualified option in an 8-pin SOIC package. Select another amplifier only when a competing part offers a necessary advantage such as lower offset voltage, greater output current, faster slew rate, integrated shutdown, a different supply rating, or a verified lifecycle commitment.
Can TLV2462ID replace TLV2462QD in an existing PCB?
TLV2462ID can be a candidate for an existing 8-pin SOIC PCB because it belongs to the same TLV2462 dual-amplifier family. Compatibility still depends on the target’s required temperature grade, automotive qualification, and ordering suffix. Confirm the complete ordering information and electrical ratings before approving the substitution; a common footprint alone does not establish qualification equivalence.
What is the best cross-brand equivalent for TLV2462QD?
No verified cross-brand equivalent is identified for the TLV2462QD in the available substitution records, so the safest recommendation is to use a same-family TLV2462 variant after checking temperature and qualification requirements. Any third-party 8-pin SOIC amplifier should be treated as a new design until its pinout, supply range, input bias current, offset voltage, output swing, bandwidth, slew rate, noise, and shutdown behavior are verified.
Where can I buy TLV2462QD and what is its price?
Use the Request a Quote form on this page to request current TLV2462QD pricing, stock confirmation, minimum order quantity, and lead time. The part is an 8-pin SOIC dual operational amplifier from Texas Instruments, and quotations should state the exact TLV2462QD suffix. Current commercial terms can vary with quantity, delivery schedule, and component traceability requirements.
What is the lead time and stock status for TLV2462QD?
Current lead time and stock should be confirmed through the Request a Quote form on this page. The manufacturer identifies TLV2462 as an active family and describes TLV2462QD as an 8-pin SOIC automotive-qualified dual operational amplifier. For production planning, request lot traceability, scheduled delivery, and confirmation that the quoted suffix is suitable for the application.
What design details matter most when using TLV2462QD?
Start with supply bypassing, input bias-current error, output swing, and stable feedback-network selection. Place the supply capacitor close to the device, keep feedback traces short, and account for parasitic input and output capacitance. The 6.4 MHz gain-bandwidth product, 80 mA output-drive capability, and 500 µA per-channel supply current define the main performance envelope, while the datasheet's recommended operating conditions define the usable limits.

Engineering reference data for TLV2462QD — comparison, design guidance, and compliance information.

Selection Guide

Choose TLV2462QD when the design needs two rail-to-rail operational-amplifier channels, a 6.4 MHz gain-bandwidth product, 500 µA supply current per channel, and an automotive-qualified ordering option in an 8-pin SOIC package. Select TLV2462QDRG4Q1 when the manufacturer’s RG4 automotive ordering option is required for the specific qualification and procurement record. Select TLV2462ID or TLV2462IP when the required industrial temperature-grade ordering class is appropriate, and select TLV2462CD or TLV2462CP when the commercial-grade class is appropriate. The TLV9062 family may provide upgraded functionality, but it should be treated as a redesign candidate until the exact package, supply behavior, shutdown architecture, and electrical limits are verified against an existing board. For any substitution, prioritize exact pin compatibility, operating range, qualification, input offset, bias current, noise, output swing, stability, and lifecycle requirements rather than package name alone.

Comparison with Alternatives

Parameter This Product TLV2462ID TLV2462CD TLV2462QDRG4Q1 TLV2462IP TLV2462CP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Number of Channels 2 2 2 2 2 2
Amplifier Type Low-power operational amplifier Low-power operational amplifier Low-power operational amplifier Low-power operational amplifier Low-power operational amplifier Low-power operational amplifier
Gain-Bandwidth Product 6.4 MHz 6.4 MHz 6.4 MHz 6.4 MHz 6.4 MHz 6.4 MHz
Supply Current 500 µA/channel 500 µA/channel 500 µA/channel 500 µA/channel 500 µA/channel 500 µA/channel
Output Drive Capability 80 mA 80 mA 80 mA 80 mA 80 mA 80 mA
Maximum Supply Voltage 6 V 6 V 6 V 6 V 6 V 6 V
Rail-to-Rail Input and Output Yes Yes Yes Yes Yes Yes

Key Differentiators

  • Combines two rail-to-rail amplifier channels in one package (vs TLV2462QDRG4Q1)
  • Automotive-qualified ordering option (vs TLV2462ID)
  • Low-power dual amplification for compact analog systems (vs TLV2462CD)

Design Notes

Place the supply-decoupling capacitor immediately adjacent to the device supply pins, and route the connection with minimal loop area. Keep input and feedback traces short and separated from output and supply-current paths. This reduces parasitic coupling into the rail-to-rail input stage, where small signals may occupy only a limited voltage range above the lower rail.

Do not leave either operational-amplifier input floating. An unused channel should be configured as a stable unity-gain buffer or tied to a defined common-mode voltage, with its output arranged so it cannot interfere with the used channel. Floating inputs can collect noise and cause unintended oscillation, even though the active channel appears electrically correct.

Account for the 6.4 MHz gain-bandwidth product when selecting feedback resistors and capacitors. Large feedback impedances can introduce parasitic-capacitance errors, while large capacitive loads can destabilize the output. Use short, direct feedback routing and verify the final source impedance, load, supply configuration, and operating gain against the stability guidance in the manufacturer datasheet.

Calculate total supply demand from both amplifier channels and all board loads. The quoted 500 µA per channel applies to the amplifier family, but battery and regulator sizing must also include output-current peaks, the stated 80 mA output-drive capability, nearby circuitry, and transient requirements. Ensure the source can support the required supply range without forcing the amplifier outside its operating limits.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The TLV2462QD is identified as AEC-Q100 automotive grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or lot documentation.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

tlv2462 datasheet TLV2462QD datasheet pdf TLV2462QD pinout TLV2462QD 8-SOIC TLV2462QD specifications TLV2462QD 6.4 MHz TLV2462QD rail-to-rail TLV2462QD equivalent TLV2462QD replacement TLV2462QD vs TLV2462ID Texas Instruments TLV2462QD TLV2462QD portable amplifier TLV2462QD price TLV2462QD stock TLV2462QD footprint

Related Components & Terms

Texas Instruments TLV2462QD TLV2462ID TLV2462CD TLV2462QDRG4Q1 TLV2462IP TLV2462CP TLV9062 operational amplifier dual operational amplifier analog amplifier signal conditioning rail-to-rail input rail-to-rail output gain-bandwidth product supply current output drive capability 8-pin SOIC SOIC package surface-mount package portable applications AEC-Q100 low-power electronics semiconductor
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details