Texas Instruments

TLV2773CN - Dual 5.1 MHz Rail-to-Rail Op Amp | Texas Instruments

MPN: TLV2773CN ✓ Active
2.7 V to 5.5 V Vdss 14-PDIP Package
MOQ: 1 |

TLV2773CN Overview

Texas Instruments TLV2773CN is a dual CMOS operational amplifier with shutdown, designed for low-voltage systems operating from 2.7 V to 5.5 V. Each channel delivers 5.1 MHz of gain-bandwidth product and a 10.5 V/µs slew rate, while the rail-to-rail output stage supports operation close to the positive and negative supply rails. The device is offered in a 14-PDIP package measuring 0.300 inch, or 7.62 mm, across the package body.

An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. A dual device contains two independent amplifiers in one package, reducing board area when a signal path needs two gain stages. The TLV2773 belongs to the amplifier hierarchy: operational amplifier, analog amplifier, analog signal-conditioning IC, and integrated circuit. Its rail-to-rail output capability is useful when the usable signal range must extend toward either supply rail.

The main performance features are the 5.1 MHz gain-bandwidth product, the 10.5 V/µs slew rate, and the shutdown function. The bandwidth permits moderate-frequency signal amplification, while the slew rate helps the outputs track larger input steps with less distortion. The shutdown control supports systems that need to reduce activity when a circuit is idle, although power-consumption figures should be taken from the manufacturer datasheet for the exact operating state.

The TLV2773 family uses a CMOS process and is specified for rail-to-rail output operation. Input common-mode range, output-voltage swing, offset voltage, input bias current, noise density, and supply-current characteristics should be confirmed in the manufacturer datasheet before precision amplifier calculations or ac-versus-dc sensitivity analysis.

Typical uses include low-voltage sensor conditioning, buffered analog measurement chains, audio preamplification, active filtering, and general-purpose dual-amplifier signal processing. The 14-PDIP package also makes the device suitable for prototypes, educational laboratories, through-hole prototypes, and industrial or instrumentation assemblies where a socketed or manually assembled dual amplifier is preferred.

Designers should verify shutdown pin polarity, input and output voltage limits, unity-gain stability, and decoupling requirements in the pin-description table and recommended operating conditions. Place the supply bypass capacitor close to the device and route sensitive input and feedback traces away from switching nodes. This page consolidates the manufacturer product information, package details, sourcing guidance, and design considerations needed for an initial engineering evaluation.

Drop-in alternatives for TLV2773CN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

TLV2773CN Maximum Ratings & Electrical Characteristics

Amplifier Type Dual operational amplifier
Topology Rail-to-rail output
Supply Voltage Range 2.7 V to 5.5 V
Gain-Bandwidth Product 5.1 MHz
Slew Rate 10.5 V/µs
Number of Channels 2 channels
Shutdown Yes
Process Technology CMOS
Package Type 14-PDIP
Package Body Width 0.300 inch (7.62 mm)
Mounting Type Through-hole
Unity-Gain Bandwidth 5.1 MHz
RoHS Status RoHS3 compliant

TLV2773CN 0.300 inch (7.62 mm) Pin Configuration Guide

Pin configuration for TLV2773CN (0.300 inch (7.62 mm) package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

0.300 inch (7.62 mm) package pinout diagram for TLV2773CN

No detailed pinout data available for TLV2773CN.

Refer to the datasheet for full pin configuration.

Typical Applications

TLV2773CN is suitable for 6 applications: Low-Voltage Sensor Signal Conditioning, Stereo Audio Preamplification, Active Filtering and Equalization, Instrumentation Buffering, Data Acquisition Front End, Portable and Battery-Powered Instruments.

🧩

Low-Voltage Sensor Signal Conditioning

The TLV2773CN suits low-voltage sensor front ends requiring two amplification or buffering stages on one board. Its 5.1 MHz gain-bandwidth product provides moderate-frequency capability, and the 10.5 V/µs slew rate allows the outputs to respond to relatively fast input transitions. Each channel can amplify a resistive-bridge, resistive-divider, or transducer output referenced near the lower supply rail. Rail-to-rail output improves available swing, but the input common-mode limits must be checked before the sensor is connected. Place a local bypass capacitor at the supply pins and route the high-impedance sensor input away from switching circuitry.

🎧

Stereo Audio Preamplification

The dual TLV2773CN can provide left and right preamplifier channels for low-voltage stereo audio systems. Its 5.1 MHz gain-bandwidth product covers the audio band with substantial margin, while the 10.5 V/µs slew rate helps maintain low distortion on larger signal transitions. Rail-to-rail output increases the usable signal range from a 2.7 V to 5.5 V supply. Gain-setting resistors should be placed close to the inverting inputs, and feedback traces should remain short and shielded from digital and switching nodes. Confirm the manufacturer noise and distortion characteristics before using the device in a high-sensitivity microphone path.

📡

Active Filtering and Equalization

The TLV2773CN can implement dual active-filter or equalization sections because it combines two amplifiers with a 5.1 MHz gain-bandwidth product. The gain-bandwidth value gives designers margin above the filter passband, while the 10.5 V/µs slew rate supports higher-amplitude waveform shaping. Verify stability at the selected closed-loop gain and keep the required passive components close to the relevant pins. Resistor tolerances and capacitor tolerances normally dominate filter accuracy, but the amplifier must also maintain acceptable phase margin at the highest frequency of interest. The shutdown feature can disable the filter during idle operating intervals.

🖥️

Instrumentation Buffering

In laboratory and industrial instrumentation, the TLV2773CN can buffer two measurement inputs while operating from a 5 V or 3.3 V rail. The dual 5.1 MHz channels support moderate-bandwidth sensing without requiring separate amplifier packages. The through-hole 14-PDIP package is especially convenient for prototype instruments, educational setups, and assemblies assembled by hand. Use a low-noise reference and short guard traces for high-impedance sources, and verify input offset and bias-current limits in the manufacturer electrical characteristics before using the device for precision dc measurements. Add supply bypass capacitance at the device pins to keep reference noise from coupling into the measurement path.

📈

Data Acquisition Front End

The TLV2773CN is useful in a compact data-acquisition front end that conditions two incoming analog channels before conversion or comparison. Its 5.1 MHz gain-bandwidth product supports higher-rate signals than a purely low-frequency precision amplifier, while the 10.5 V/µs slew rate limits large-signal slew effects. Rail-to-rail output permits the conditioned signal to occupy more of the available supply range. The shutdown input supports duty-cycled acquisition systems where the amplifier should be inactive between measurement windows. Establish the required gain, analog bandwidth, settling time, and output headroom before finalizing component values and the acquisition timing.

🔋

Portable and Battery-Powered Instruments

The TLV2773CN is appropriate for portable instruments because it operates from 2.7 V to 5.5 V and provides a shutdown control for reducing activity when measurements are not needed. The two channels can support dual sensing, gain stages, or active-filter sections while keeping the 14-PDIP footprint compact compared with two single-amplifier packages. Battery life depends on the exact supply current in the selected operating mode, which must be confirmed in the manufacturer electrical characteristics. Confirm the regulator dropout, startup behavior, load-transient response, and analog signal levels to ensure reliable operation over the battery's discharge range.

What is the TLV2773CN?
The TLV2773CN is a dual, 2.7 V to 5.5 V CMOS operational amplifier with rail-to-rail output, shutdown control, 5.1 MHz gain-bandwidth product, and a 10.5 V/µs slew rate. Texas Instruments identifies the device as part of the TLV2773 family and packages this ordering code in a 14-PDIP enclosure. It is intended for low-voltage analog signal conditioning where two amplifier channels and rail-to-rail output swing are useful.
What is the gain-bandwidth product of the TLV2773CN?
The TLV2773CN has a 5.1 MHz gain-bandwidth product. This value describes the approximate closed-loop bandwidth available at unity gain according to the manufacturer product information. The bandwidth is suitable for moderate-frequency instrumentation, filtering, and buffering applications, but it is not a high-speed video or RF amplifier bandwidth. Closed-loop gain reduces usable bandwidth, so verify the required signal frequency against the amplifier gain in the design.
How fast is the TLV2773CN slew rate?
The TLV2773CN has a slew rate of 10.5 V/µs. Slew rate determines how quickly the output can move through a voltage change, which is particularly important for large-signal swing and square-wave response. The 10.5 V/µs figure is identified by Texas Instruments for the TLV2773 family and supports faster settling than many general-purpose low-voltage amplifiers. Full-scale drive capability and stability should still be checked in the datasheet.
Does the TLV2773CN support rail-to-rail output?
Yes, the TLV2773CN supports rail-to-rail output operation. Rail-to-rail output means the output can approach the supply rails more closely than a conventional amplifier, which maximizes usable output range in 2.7 V to 5.5 V systems. The manufacturer describes the TLV2773 as a rail-to-rail output amplifier. Input common-mode range is a separate characteristic and must be checked separately when the source voltage approaches a rail.
Where can I download the TLV2773CN datasheet PDF?
The official TLV2773CN datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/ds/symlink/tlv2773.pdf. Use the manufacturer PDF for the authoritative pin-description table, recommended operating conditions, electrical characteristics, and application information. The device product page is also available at https://www.ti.com/product/TLV2773 and links to ordering information, quality data, and the current datasheet revision.
What package does the TLV2773CN use?
The TLV2773CN uses a 14-PDIP through-hole package with a listed body width of 0.300 inch, or 7.62 mm. The DIP format is suited to prototyping, laboratory work, socketed assemblies, and manual through-hole assembly. Its 14-pin arrangement provides space for two operational amplifiers, supply connections, and the family-specific shutdown function. Confirm the physical pin numbering from the manufacturer pin-description table before assigning PCB connections.
What is the TLV2773CN used for in sensor circuits?
The TLV2773CN is used to amplify sensor outputs in low-voltage measurement systems. Its 5.1 MHz gain-bandwidth product handles moderate-frequency signals, while the 10.5 V/µs slew rate allows the output to respond to larger voltage steps. The dual configuration can amplify or buffer two related channels, or one channel can be used for active filtering. Choose input and feedback resistors for the required gain and confirm the sensor output stays inside the input common-mode range.
Can I use the TLV2773CN for audio preamplification?
Yes, the TLV2773CN can be used for low-voltage audio preamplification because it has rail-to-rail output, 5.1 MHz bandwidth, and a 10.5 V/µs slew rate. Two channels allow stereo preamplification in one package. Headroom calculations should include the signal amplitude, gain, output swing, and the load impedance. Use the manufacturer noise and distortion characteristics to verify that the amplifier meets the sensitivity and fidelity requirements of the audio path.
Is the TLV2773CN suitable for battery-powered equipment?
The TLV2773CN can suit battery-powered equipment because its 2.7 V to 5.5 V supply range covers common low-voltage rails and the device includes a shutdown function. Shutdown can reduce activity when the analog section is not required. Actual battery-life benefit depends on the mode-specific supply current, which must be confirmed in the manufacturer electrical characteristics. A low-voltage regulator and reverse-protection strategy are still required around the device.
What is the best drop-in replacement for the TLV2773CN?
No drop-in replacement can be confirmed from the available manufacturer product information. A drop-in replacement must preserve the 14-PDIP footprint, pin functions, shutdown polarity, supply range, and electrical performance. The TLV9362IDDFR is described as a close functional equivalent, but it uses a surface-mount package and is therefore not a direct PCB replacement. Request a pin-compatible substitute through the Request a Quote form after confirming the required footprint and shutdown behavior.
Can the TLV9362IDDFR replace the TLV2773CN on the same PCB?
No, the TLV9362IDDFR cannot directly replace the TLV2773CN on an unchanged PCB because the package differs. The TLV2773CN uses a 14-PDIP through-hole package, while the TLV9362IDDFR is identified as a surface-mount device. The TLV9362 also offers a 10.6 MHz gain-bandwidth product and a 25 V/µs slew rate, but faster specifications do not compensate for the mechanical and pin-layout change. A footprint and assembly redesign would be required.
TLV2773CN versus TLV9362IDDFR: which is better for a new design?
The TLV2773CN is preferable when a new through-hole design requires a 14-PDIP package, whereas the TLV9362IDDFR is preferable when surface-mount assembly is acceptable. The TLV9362IDDFR has a 10.6 MHz gain-bandwidth product and 25 V/µs slew rate, compared with 5.1 MHz and 10.5 V/µs for the TLV2773 family. Confirm shutdown, supply, input-range, and offset-voltage requirements before either part is selected.
When should I choose the TLV2773CN instead of a surface-mount amplifier?
Choose the TLV2773CN when through-hole construction, socketability, or manual assembly is a priority and its 5.1 MHz bandwidth and 10.5 V/µs slew rate are sufficient. The dual 14-PDIP package simplifies prototyping and avoids a board respin when a standard DIP footprint is already established. A surface-mount amplifier may be preferable for automated assembly, smaller board area, or faster dynamics, provided the PCB layout is redesigned.
Is the TLV2773CN suitable for an active filter?
The TLV2773CN can implement active filtering functions because it provides two channels, 5.1 MHz gain-bandwidth product, and a 10.5 V/µs slew rate. Confirm that the required filter topology remains stable at the selected closed-loop gain and that the signal amplitude remains within the output swing. Resistor and capacitor tolerances will often determine the filter's actual accuracy more than the amplifier itself.
How should I decouple the TLV2773CN power supply?
Place the supply bypass capacitor immediately next to the device's positive supply and ground pins, and use a short, low-inductance return path to the capacitor ground terminal. Follow the recommended capacitance and layout in the manufacturer datasheet for final component selection. Keep sensitive input and feedback traces away from the capacitor's current loop and from switching-node copper to reduce noise pickup and unintended feedback.
How do I find the TLV2773CN pinout?
Use the pin-description table in the official TLV2773 datasheet at https://www.ti.com/lit/ds/symlink/tlv2773.pdf to identify every pin, the shutdown control, supply connections, channel outputs, and no-connect positions. The TLV2773CN is a 14-pin device, but a numeric pin list must not be inferred from the package alone because the shutdown and no-connect assignments are family-specific. Verify the printed pin-1 orientation and the notch position before soldering.
What are the key specifications of the TLV2773CN that engineers should know?
The key TLV2773CN specifications are dual channel operation, a 2.7 V to 5.5 V supply range, rail-to-rail output, 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, CMOS construction, and a shutdown function. The ordering code uses a 14-PDIP package with a 0.300 inch, or 7.62 mm, body width. Texas Instruments identifies the device as the TLV2773 dual, 5.5 V, 5.1 MHz high-slew-rate operational amplifier.
What can replace the TLV2773CN?
The TLV9362IDDFR is a close functional alternative with 10.6 MHz gain-bandwidth product and 25 V/µs slew rate, but it is not a mechanical drop-in replacement for the 14-PDIP TLV2773CN. A direct replacement requires the same package, pin functions, shutdown polarity, supply range, and comparable electrical limits. Use the Request a Quote form on this page to request a validated drop-in option, or redesign the PCB for a surface-mount amplifier.
Where can I buy the TLV2773CN and what is its current price?
Use the Request a Quote form on this page to request the current TLV2773CN price, stock position, and lead time. The device is offered in a 14-PDIP package by Texas Instruments, and distributor listings identify the part as a dual CMOS rail-to-rail operational amplifier. Pricing and availability change with market conditions, so obtain a current quotation for the exact 14-pin ordering code rather than relying on a historical reference figure.

Engineering reference data for TLV2773CN — comparison, design guidance, and compliance information.

Selection Guide

Choose the TLV2773CN when the design needs a dual, low-voltage amplifier in a 14-PDIP through-hole package and its 5.1 MHz gain-bandwidth product plus 10.5 V/µs slew rate are sufficient. It is particularly convenient for prototypes, socketed assemblies, educational equipment, and manual assembly. The shutdown function supports duty-cycled or power-managed analog sections. The TLV9362IDDFR is the better choice for surface-mount assembly or designs needing greater bandwidth and slew rate, but it is not a mechanical drop-in replacement. If either device is acceptable, verify shutdown polarity, input common-mode range, offset voltage, bias current, output swing, and stability at the intended closed-loop gain. Confirm the current availability, packaging quantity, and lead time through the Request a Quote form.

Comparison with Alternatives

Parameter This Product
Package 14-PDIP (0.300 inch, 7.62 mm)
Brand Texas Instruments
Number of Channels 2 channels
Supply Voltage Range 2.7 V to 5.5 V
Gain-Bandwidth Product 5.1 MHz
Slew Rate 10.5 V/µs
Output Topology Rail-to-rail output
Shutdown Function Yes
Process Technology CMOS
RoHS Status RoHS3 compliant

Key Differentiators

  • Through-hole dual-amplifier implementation (vs TLV9362IDDFR)
  • Lower dynamic bandwidth with integrated shutdown (vs TLV9362IDDFR)
  • Dual amplifier in one 14-pin through-hole package (vs Single-channel through-hole alternatives)

Design Notes

Place the supply bypass capacitor directly across the device's positive supply and ground pins, with the ground connection following the shortest practical return path. Keep high-impedance input and inverting-feedback traces away from the capacitor connection, power inductors, and switching nodes. For the 14-PDIP implementation, observe the package notch when locating pin 1 and confirm every connection against the manufacturer pin-description table.

Rail-to-rail output does not guarantee the same rail-to-rail input range. Check the input common-mode limits, output swing, input offset voltage, and bias current before designing a signal source that operates close to either supply rail. Also confirm the shutdown pin polarity and logic threshold from the datasheet so the control signal does not place the amplifier in an unintended state during power sequencing.

Use short, well-grounded feedback loops and avoid routing the non-inverting input next to the output. A single ground or via connection is often preferable to a long chain of vias through multiple ground planes. When driving a capacitive load, evaluate stability with the manufacturer's recommended isolation resistor. These steps help prevent oscillation, improve settling, and preserve the expected 5.1 MHz bandwidth and 10.5 V/µs slew-rate performance.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

A product listing identifies the TLV2773CN as RoHS3 compliant and associates the series with automotive sourcing. A listing association alone does not establish AEC-Q100 qualification for this ordering code.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

TLV2773CN datasheet TLV2773CN pinout TLV2773CN datasheet pdf TLV2773CN 14-PDIP TLV2773CN equivalent TLV2773CN replacement TLV2773CN drop-in substitute TLV2773CN vs TLV9362IDDFR Texas Instruments TLV2773CN TLV2773CN 5.1 MHz op amp TLV2773CN 10.5 V/us slew rate TLV2773CN price TLV2773CN stock TLV2773 sensor signal conditioning TLV2773 active filter circuit

Related Components & Terms

Texas Instruments TLV2773CN TLV2773 TLV9362IDDFR operational amplifier dual amplifier analog amplifier CMOS rail-to-rail output shutdown control gain-bandwidth product slew rate 2.7 V minimum supply voltage 5.5 V maximum supply voltage 5.1 MHz 10.5 V/µs 14-PDIP through-hole mounting sensor signal conditioning active filter audio preamplifier battery-powered instrumentation RoHS AEC-Q100
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details