WM8950CGEFL/RV - 24-Bit Mono Audio ADC | Cirrus Logic
MPN: WM8950CGEFL/RV ✓ ActiveWM8950CGEFL/RV Overview
An audio ADC is a data-converter IC that samples an analog microphone or line-level signal and converts it into a digital representation for transmission, storage, or further processing. The WM8950 belongs to the ADC/DAC class of data converters, where the delta-sigma architecture emphasizes high resolution and compact implementation. Its DSP interface supports configurable digital signal processing, while I2S provides a conventional connection to digital audio processors.
The device provides 24-bit resolution, a maximum sampling rate of 48 kSPS, one analog input channel, and an I2S digital audio interface. A 1.71 V to 3.6 V supply range permits operation from low-voltage digital systems, while the 24-QFN package limits board area to 4 x 4 mm. The exposed-pad construction provides a direct thermal path from the converter to the PCB when properly soldered and thermally coupled.
Its delta-sigma conversion architecture is suited to audio-band signals requiring greater resolution than a compact 8-bit or 16-bit system ADC. The DSP interface can apply digital filtering and signal conditioning before data reaches the host processor, reducing the need for separate software and analog processing in embedded audio designs. The 48 kSPS rate covers standard digital-audio acquisition rates used in voice, communication, and consumer equipment.
Typical uses include digital microphones, microphone-array preprocessing, industrial monitoring, smart-home audio nodes, portable accessories, and embedded voice-capture systems. In these applications, the converter can capture one analog channel and present digital audio to an application processor, DSP, or audio subsystem. The compact footprint is especially useful where board space is constrained and the 24-bit word length preserves low-level signal detail.
Designers should treat the exposed pad as both a thermal and electrical land, follow the manufacturer's recommended decoupling and layout guidance, and confirm all digital-interface signal levels against the host device. The 0.5 mm terminal pitch requires careful assembly inspection because fine-pitch soldering defects can cause intermittent channel or interface failures.
This page consolidates the verified electrical identity, package information, orderable variants, drop-in candidates, and practical design guidance needed to evaluate the WM8950CGEFL/RV for an embedded audio-conversion design.
Drop-in alternatives for WM8950CGEFL/RV — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
WM8950CGEFL/V
✅ Drop-In📋 Reference alternative (not in catalog)
WM8950GEFL-RV
✅ Drop-In📋 Reference alternative (not in catalog)
WM8950CGEFL/RV Maximum Ratings & Electrical Characteristics
| Converter Type | Delta-sigma audio ADC |
| Number of Channels | 1 channel |
| Resolution | 24 bit |
| Maximum Sampling Rate | 48 kSPS |
| Digital Audio Interface | I2S |
| Digital Signal Processing | DSP interface |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Operating Temperature Range | -40 °C to +85 °C |
| Package | 24-QFN (4 x 4 mm) |
| Exposed Pad | Yes |
| Terminal Pitch | 0.5 mm |
| Mounting Type | Surface mount |
| Shipping Format | Tape and reel |
| Analog Input Type | Mono microphone input |
WM8950CGEFL/RV 24-qfn (4 x 4 mm) Pin Configuration Guide
Pin configuration for WM8950CGEFL/RV (24-qfn (4 x 4 mm) package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for WM8950CGEFL/RV.
Refer to the datasheet for full pin configuration.
Typical Applications
WM8950CGEFL/RV is suitable for 6 applications: Digital Microphone Module, Industrial Voice Monitor, Smart-Home Audio Node, Portable Voice Accessory, Microphone Array Preprocessing, Test and Measurement Audio Capture.
Digital Microphone Module
The WM8950CGEFL/RV fits a digital microphone module that must preserve low-level audio detail within a compact circuit. Its 24-bit resolution and 48 kSPS maximum sampling rate provide a suitable conversion format for voice capture, while the DSP interface can apply filtering or gain-related processing before the signal reaches a host controller. The 1.71 V to 3.6 V supply range also supports low-voltage embedded platforms. Place the analog input and bypass network close to the device, and verify the microphone’s biasing and signal amplitude against the recommended application circuit.
Recommended
Industrial Voice Monitor
The WM8950CGEFL/RV is suitable for an industrial voice-monitoring node that captures one analog audio channel and transfers it to an embedded processor. A 24-bit conversion format at up to 48 kSPS preserves more signal detail than a low-resolution acquisition channel, and the I2S output connects cleanly to a digital audio processor. The -40 °C to +85 °C operating range covers many indoor and controlled industrial environments. For equipment placed near heat sources, estimate the converter’s self-heating and use the exposed pad as the principal thermal path to the PCB.
Recommended
Smart-Home Audio Node
The WM8950CGEFL/RV can serve as the acquisition front end in a smart-home audio node that listens for commands or environmental sound. Its single-channel mono input limits it to one-source acquisition, but the 24-bit resolution and DSP interface support compact filtering before communication to a wireless-capable controller. The 4 x 4 mm QFN body conserves board area in small enclosures, and the 1.71 V to 3.6 V supply range supports low-voltage power systems. Confirm acoustic input amplitude, grounding, and I2S clocking to prevent clipping or synchronization errors.
Recommended
Portable Voice Accessory
The WM8950CGEFL/RV fits a portable voice accessory where a microphone signal must be converted before wireless transmission or local playback. Its low-voltage operating range reduces the power-supply burden in battery-operated equipment, while the 24-bit format preserves detail across the audio path. The mono input supports a single voice source without allocating circuitry to multiple converters. Designers should still compare converter dynamic range, microphone sensitivity, clock jitter, and total board power against the final mechanical and acoustic constraints before fixing the BOM.
Recommended
Microphone Array Preprocessing
The WM8950CGEFL/RV can be used per channel in a microphone array when each analog source requires dedicated high-resolution conversion before digital beamforming. At 24 bits and up to 48 kSPS, the converter supplies a conventional digital-audio stream for array-processing logic, while its DSP interface offers a path for channel-specific conditioning. Each converter requires correct clocking, grounding, and decoupling. The single-channel architecture means an array designer must plan power, routing, and synchronization for each populated position rather than multiplexing several microphones into one converter.
Recommended
Test and Measurement Audio Capture
The WM8950CGEFL/RV is appropriate for a compact audio-capture instrument that records one analog channel as 24-bit digital data at up to 48 kSPS. The higher word length can preserve low-amplitude signal detail, and the I2S output can feed a processor or storage path without requiring a parallel data bus. The exposed-pad package helps conduct heat into the board, but thermal performance still depends on copper and via placement. Validate the input bandwidth, attenuation, clock accuracy, and distortion requirements with the manufacturer’s recommended analog network.
Recommended
Recommended Products Summary
Engineering reference data for WM8950CGEFL/RV — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | WM8950CGEFL/V | WM8950GEFL-RV |
|---|---|---|---|
| Package | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 48 kSPS | 48 kSPS | 48 kSPS |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
Key Differentiators
- Maintains full published resolution and sampling performance across the verified orderable variant (vs WM8950CGEFL/V)
- Matches the target's low-voltage operating range (vs WM8950CGEFL/V)
- Uses the same compact 24-QFN footprint (vs WM8950GEFL-RV)
Design Notes
Follow the Cirrus Logic manufacturer datasheet layout exactly, particularly the analog-input routing, supply decoupling, exposed-pad connection, and ground arrangement. The 24-QFN package uses a 0.5 mm terminal pitch, so inspect the assembled board for solder bridges and incomplete joints. Keep the analog input trace short, place input and bypass capacitors close to their associated pins, and provide a continuous ground reference beneath the package to reduce conversion noise and coupling into the I2S interface.
Use the exposed pad as the converter’s primary thermal path and couple it to the PCB using the manufacturer’s recommended pad, via, and copper configuration. Estimated: the device’s operating dissipation cannot be calculated reliably from the available operating conditions because the output-voltage, digital-interface, and load details needed for a worst-case calculation are not specified. Validate the final assembly by measuring converter temperature during maximum sampling-rate and digital-activity conditions.
Treat I2S clock, data, and frame signals as a matched interface and confirm that the host controller supplies the required clock relationship and signal amplitudes. According to the Cirrus Logic manufacturer datasheet, the converter operates from 1.71 V to 3.6 V; the host, I2S interface, and converter rails must therefore share compatible logic levels or use an appropriate translator. Keep switching-clock routes away from the analog input and provide a quiet return path for digital signals.
Do not assume that every WM8950 orderable suffix is interchangeable solely because the package drawing matches. Check the exact qualification, marking, temperature, and lead-finish requirements for WM8950CGEFL/RV, WM8950CGEFL/V, and WM8950GEFL-RV before changing the BOM. Also verify that the selected host expects the converter’s I2S channel format, sample-rate support, clock polarity, and bit ordering; a correct PCB footprint alone does not guarantee functional interchangeability.
Compliance Information
Exact-suffix material-compliance declarations were not identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status using the current Cirrus Logic manufacturer documentation for WM8950CGEFL/RV.