Cirrus Logic Inc.

WM8950CGEFL/RV - 24-Bit Mono Audio ADC | Cirrus Logic

Référence : WM8950CGEFL/RV ✓ Actif
1.71 V to 3.6 V Vdss 24-QFN (4 x 4 mm) Package
MOQ : 1 |

WM8950CGEFL/RV Présentation

The Cirrus Logic WM8950CGEFL/RV is a single-channel, 24-bit delta-sigma audio ADC operating at up to 48 kSPS, with a DSP interface and digital audio output, packaged in a 24-QFN surface-mount package measuring 4 x 4 mm. Its 1.71 V to 3.6 V analog supply range supports low-voltage portable, embedded, and consumer audio systems.

An audio ADC is a data-converter IC that samples an analog microphone or line-level signal and converts it into a digital representation for transmission, storage, or further processing. The WM8950 belongs to the ADC/DAC class of data converters, where the delta-sigma architecture emphasizes high resolution and compact implementation. Its DSP interface supports configurable digital signal processing, while I2S provides a conventional connection to digital audio processors.

The device provides 24-bit resolution, a maximum sampling rate of 48 kSPS, one analog input channel, and an I2S digital audio interface. A 1.71 V to 3.6 V supply range permits operation from low-voltage digital systems, while the 24-QFN package limits board area to 4 x 4 mm. The exposed-pad construction provides a direct thermal path from the converter to the PCB when properly soldered and thermally coupled.

Its delta-sigma conversion architecture is suited to audio-band signals requiring greater resolution than a compact 8-bit or 16-bit system ADC. The DSP interface can apply digital filtering and signal conditioning before data reaches the host processor, reducing the need for separate software and analog processing in embedded audio designs. The 48 kSPS rate covers standard digital-audio acquisition rates used in voice, communication, and consumer equipment.

Typical uses include digital microphones, microphone-array preprocessing, industrial monitoring, smart-home audio nodes, portable accessories, and embedded voice-capture systems. In these applications, the converter can capture one analog channel and present digital audio to an application processor, DSP, or audio subsystem. The compact footprint is especially useful where board space is constrained and the 24-bit word length preserves low-level signal detail.

Designers should treat the exposed pad as both a thermal and electrical land, follow the manufacturer's recommended decoupling and layout guidance, and confirm all digital-interface signal levels against the host device. The 0.5 mm terminal pitch requires careful assembly inspection because fine-pitch soldering defects can cause intermittent channel or interface failures.

This page consolidates the verified electrical identity, package information, orderable variants, drop-in candidates, and practical design guidance needed to evaluate the WM8950CGEFL/RV for an embedded audio-conversion design.

Alternatives de remplacement direct pour WM8950CGEFL/RV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

WM8950CGEFL/V

✅ Remplacement direct
📦 24-QFN (4 x 4 mm)
Same 24-bit resolution, 48 kSPS rate, 1.71-3.6 V supply, and 24-QFN footprint; 0% difference in the published core ratings

📋 Alternative de référence (hors catalogue)

WM8950GEFL-RV

✅ Remplacement direct
📦 24-QFN (4 x 4 mm)
Same WM8950 family and 24-QFN format; published core conversion ratings differ by 0%, while the suffix-specific qualification is not characterized

📋 Alternative de référence (hors catalogue)

WM8950CGEFL/RV Valeurs maximales et caractéristiques électriques

Converter Type Delta-sigma audio ADC
Number of Channels 1 channel
Résolution 24 bit
Maximum Sampling Rate 48 kSPS
Digital Audio Interface I2S
Digital Signal Processing DSP interface
Supply Voltage Range 1.71 V to 3.6 V
Plage de température de fonctionnement -40 °C to +85 °C
Boîtier 24-QFN (4 x 4 mm)
Exposed Pad Yes
Terminal Pitch 0.5 mm
Type de montage Surface mount
Shipping Format Tape and reel
Analog Input Type Mono microphone input

Guide de configuration des broches du WM8950CGEFL/RV 24-qfn (4 x 4 mm)

Configuration des broches du WM8950CGEFL/RV (boîtier 24-qfn (4 x 4 mm)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 24-qfn (4 x 4 mm) pour le WM8950CGEFL/RV

Aucune donnée de brochage détaillée disponible pour WM8950CGEFL/RV.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

WM8950CGEFL/RV convient pour 6 applications: Digital Microphone Module, Industrial Voice Monitor, Smart-Home Audio Node, Portable Voice Accessory, Microphone Array Preprocessing, Test and Measurement Audio Capture.

🎤

Digital Microphone Module

The WM8950CGEFL/RV fits a digital microphone module that must preserve low-level audio detail within a compact circuit. Its 24-bit resolution and 48 kSPS maximum sampling rate provide a suitable conversion format for voice capture, while the DSP interface can apply filtering or gain-related processing before the signal reaches a host controller. The 1.71 V to 3.6 V supply range also supports low-voltage embedded platforms. Place the analog input and bypass network close to the device, and verify the microphone’s biasing and signal amplitude against the recommended application circuit.

🏭

Industrial Voice Monitor

The WM8950CGEFL/RV is suitable for an industrial voice-monitoring node that captures one analog audio channel and transfers it to an embedded processor. A 24-bit conversion format at up to 48 kSPS preserves more signal detail than a low-resolution acquisition channel, and the I2S output connects cleanly to a digital audio processor. The -40 °C to +85 °C operating range covers many indoor and controlled industrial environments. For equipment placed near heat sources, estimate the converter’s self-heating and use the exposed pad as the principal thermal path to the PCB.

🧩

Smart-Home Audio Node

The WM8950CGEFL/RV can serve as the acquisition front end in a smart-home audio node that listens for commands or environmental sound. Its single-channel mono input limits it to one-source acquisition, but the 24-bit resolution and DSP interface support compact filtering before communication to a wireless-capable controller. The 4 x 4 mm QFN body conserves board area in small enclosures, and the 1.71 V to 3.6 V supply range supports low-voltage power systems. Confirm acoustic input amplitude, grounding, and I2S clocking to prevent clipping or synchronization errors.

📱

Portable Voice Accessory

The WM8950CGEFL/RV fits a portable voice accessory where a microphone signal must be converted before wireless transmission or local playback. Its low-voltage operating range reduces the power-supply burden in battery-operated equipment, while the 24-bit format preserves detail across the audio path. The mono input supports a single voice source without allocating circuitry to multiple converters. Designers should still compare converter dynamic range, microphone sensitivity, clock jitter, and total board power against the final mechanical and acoustic constraints before fixing the BOM.

🎙️

Microphone Array Preprocessing

The WM8950CGEFL/RV can be used per channel in a microphone array when each analog source requires dedicated high-resolution conversion before digital beamforming. At 24 bits and up to 48 kSPS, the converter supplies a conventional digital-audio stream for array-processing logic, while its DSP interface offers a path for channel-specific conditioning. Each converter requires correct clocking, grounding, and decoupling. The single-channel architecture means an array designer must plan power, routing, and synchronization for each populated position rather than multiplexing several microphones into one converter.

🔧

Test and Measurement Audio Capture

The WM8950CGEFL/RV is appropriate for a compact audio-capture instrument that records one analog channel as 24-bit digital data at up to 48 kSPS. The higher word length can preserve low-amplitude signal detail, and the I2S output can feed a processor or storage path without requiring a parallel data bus. The exposed-pad package helps conduct heat into the board, but thermal performance still depends on copper and via placement. Validate the input bandwidth, attenuation, clock accuracy, and distortion requirements with the manufacturer’s recommended analog network.

What is the WM8950CGEFL/RV?
The WM8950CGEFL/RV is a single-channel, 24-bit delta-sigma audio ADC with a maximum sampling rate of 48 kSPS, DSP support, and an I2S digital audio interface. According to the Cirrus Logic manufacturer datasheet information, the converter operates from a 1.71 V to 3.6 V supply and is housed in a 24-QFN package measuring 4 x 4 mm. It is intended for compact audio capture systems requiring more resolution than conventional 8-bit or 16-bit converters.
What are the key specifications of WM8950CGEFL/RV?
The WM8950CGEFL/RV provides one analog input channel, 24-bit resolution, up to 48 kSPS conversion, a DSP interface, and I2S output in a 24-QFN package. The Cirrus Logic manufacturer datasheet lists a 1.71 V to 3.6 V supply range, an operating temperature range of -40 °C to +85 °C, a 4 x 4 mm body, and a 0.5 mm terminal pitch. These parameters define it as a low-voltage, compact converter for embedded audio acquisition.
Where can I download the WM8950CGEFL/RV datasheet PDF?
The WM8950CGEFL/RV datasheet is accessible through the Cirrus Logic manufacturer documentation linked on this page and through the product’s technical-document listing. According to the manufacturer datasheet, the key electrical limits and pin assignments must be taken from the package-specific documentation for the 24-QFN device. The linked datasheet also provides the authoritative details for analog inputs, digital interfaces, supply sequencing, decoupling, and exposed-pad layout.
Where can I find the WM8950CGEFL/RV pinout?
The WM8950CGEFL/RV pinout is defined in the pin-description table of the Cirrus Logic manufacturer datasheet. The component uses a 24-pin QFN package with a 0.5 mm terminal pitch and an exposed thermal pad, so PCB design should follow the manufacturer’s land pattern and pad-connection instructions. Use the package-specific pin table when assigning analog inputs, digital audio signals, supply rails, ground connections, and configuration pins.
What voltage supply does the WM8950CGEFL/RV use?
The WM8950CGEFL/RV operates from 1.71 V to 3.6 V according to the Cirrus Logic manufacturer datasheet and the published product characteristics. This low-voltage range supports compact embedded audio systems operating from low-energy supply rails. The design must maintain the required supply levels at the converter pins, account for host-interface voltage compatibility, and follow the recommended decoupling network for stable conversion performance.
Is the WM8950CGEFL/RV suitable for digital microphone applications?
Yes, the WM8950CGEFL/RV is suitable for digital microphone acquisition because it combines a mono microphone input with 24-bit conversion and an I2S output. According to the Cirrus Logic manufacturer datasheet, it supports sampling rates up to 48 kSPS and includes a DSP interface for digital signal conditioning. Its 24-QFN package also reduces PCB footprint, making it useful for voice modules, microphone arrays, and space-constrained IoT audio nodes.
WM8950CGEFL/RV vs WM8950CGEFL/V - which orderable variant should I select?
The WM8950CGEFL/RV and WM8950CGEFL/V both identify the same Cirrus Logic 24-bit, 48 kSPS audio ADC family in a 24-QFN package. According to the manufacturer product listings, the published conversion, interface, and package ratings are the same, so the orderable suffix must be selected according to the exact qualification, lifecycle, or supply arrangement required by the bill of materials. The WM8950CGEFL/RV is the specified target for this page.
When should I choose WM8950CGEFL/RV over another audio ADC?
Choose the WM8950CGEFL/RV when a design needs one mono analog channel, 24-bit resolution, up to 48 kSPS, DSP-assisted processing, and I2S integration in a 4 x 4 mm package. According to the Cirrus Logic manufacturer datasheet, the 1.71 V to 3.6 V operating range also suits low-voltage embedded systems. Choose another converter only when it offers a verified advantage such as more channels, higher sampling speed, lower power, or a different host interface.
What is the best drop-in replacement for WM8950CGEFL/RV?
The closest verified drop-in choices are the WM8950CGEFL/V and WM8950GEFL-RV variants because they use the same 24-QFN format and retain the published 24-bit, 48 kSPS audio-converter identity. According to the Cirrus Logic manufacturer product information, the target’s core ratings remain unchanged across these variants. The exact suffix qualification must be reviewed before substitution, and fewer than five distinct drop-in parts were identified without padding the list with unrelated codec packages.
Can WM8950CGEFL/RV replace a generic mono audio ADC?
A generic mono audio ADC is only a replacement if it matches the WM8950CGEFL/RV supply range, sample rate, resolution, digital interface, pinout, and exposed-pad land pattern. According to the Cirrus Logic manufacturer datasheet, the target uses 24-bit conversion at up to 48 kSPS with DSP and I2S features, so a basic 16-bit I2S converter may not be functionally equivalent even when its resolution is adequate. Board replacement should therefore follow a complete pin and interface comparison.
What are the best Texas Instruments alternatives to WM8950CGEFL/RV?
The PCM1865 is a relevant Texas Instruments audio-converter comparison, but it should not be treated as a board-level drop-in without confirming its package, pinout, supply voltage, and digital interface. According to the Texas Instruments manufacturer documentation for the selected comparison device, functional equivalence depends on channel count, converter architecture, sampling rate, and host connectivity. The WM8950CGEFL/RV remains preferable when its 24-QFN footprint and I2S/DSP interface are already fixed by the PCB.
How should the WM8950CGEFL/RV exposed pad be handled?
The exposed pad should be connected according to the Cirrus Logic manufacturer datasheet and the package land-pattern instructions. It provides the thermal path needed to remove heat from the converter and normally forms part of the ground connection specified by the manufacturer. Solder the exposed pad using an appropriate footprint and assembly process, maintain the thermal-via and copper recommendations, and avoid long unplated thermal spokes that can reduce heat-transfer performance.
How is the WM8950CGEFL/RV operated over its temperature range?
The WM8950CGEFL/RV is specified for operation from -40 °C to +85 °C according to the Cirrus Logic manufacturer datasheet and published product characteristics. Designs must keep the converter, its analog input path, and its digital interface within this range while accounting for self-heating near the exposed pad. Use the manufacturer’s thermal information and maximum supply and input limits when defining the enclosure, heat spreading, and worst-case operating conditions.
Is the WM8950CGEFL/RV compliant with RoHS and REACH?
The RoHS and REACH status must be confirmed for the exact WM8950CGEFL/RV orderable suffix using the current Cirrus Logic manufacturer material-declaration documentation. According to the manufacturer compliance process, package and shipment suffixes can be tracked separately in some product systems, so a statement for a related WM8950 variant should not be assumed to apply automatically. Request the material-compliance declaration for this exact MPN before releasing a production design.
Where can I buy WM8950CGEFL/RV and what is its lead time?
Use the Request a Quote form on this page to request WM8950CGEFL/RV availability, order quantities, lead time, and delivery options. Current catalog listings identify the exact part as a 24-bit, 48 kSPS Cirrus Logic audio ADC, but quotations remain the appropriate mechanism for commercial confirmation. Provide the target quantity, reel or tray requirement, date code preference, and destination country so operations can respond with an actionable supply commitment.

Données de référence d'ingénierie pour WM8950CGEFL/RV — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the WM8950CGEFL/RV when the design needs a single mono audio channel, 24-bit conversion, up to 48 kSPS sampling, DSP support, and an I2S interface in a 4 x 4 mm QFN package. Its 1.71 V to 3.6 V supply range is appropriate for compact low-voltage equipment. Select WM8950CGEFL/V when that exact orderable suffix satisfies the required qualification and supply plan while retaining the same published core ratings and footprint. Consider WM8950GEFL-RV only after confirming the suffix-specific electrical and qualification details. The PCM1865, AK4458, and CS4272 may provide functional audio-converter comparisons, but they were not verified as same-package, pin-to-pin drop-in replacements and should not be used for a direct PCB substitution. Before final selection, confirm channel count, clocking, interface format, input bandwidth, thermal performance, and lifecycle requirements against the complete manufacturer datasheet.

Comparaison avec les alternatives

Paramètre Ce produit WM8950CGEFL/V WM8950GEFL-RV
Package 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm)
Brand Cirrus Logic Cirrus Logic Cirrus Logic
Resolution 24 bit 24 bit 24 bit
Maximum Sampling Rate 48 kSPS 48 kSPS 48 kSPS
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C

Principaux différenciateurs

  • Maintains full published resolution and sampling performance across the verified orderable variant (vs WM8950CGEFL/V)
  • Matches the target's low-voltage operating range (vs WM8950CGEFL/V)
  • Uses the same compact 24-QFN footprint (vs WM8950GEFL-RV)

Notes de conception

Follow the Cirrus Logic manufacturer datasheet layout exactly, particularly the analog-input routing, supply decoupling, exposed-pad connection, and ground arrangement. The 24-QFN package uses a 0.5 mm terminal pitch, so inspect the assembled board for solder bridges and incomplete joints. Keep the analog input trace short, place input and bypass capacitors close to their associated pins, and provide a continuous ground reference beneath the package to reduce conversion noise and coupling into the I2S interface.

Use the exposed pad as the converter’s primary thermal path and couple it to the PCB using the manufacturer’s recommended pad, via, and copper configuration. Estimated: the device’s operating dissipation cannot be calculated reliably from the available operating conditions because the output-voltage, digital-interface, and load details needed for a worst-case calculation are not specified. Validate the final assembly by measuring converter temperature during maximum sampling-rate and digital-activity conditions.

Treat I2S clock, data, and frame signals as a matched interface and confirm that the host controller supplies the required clock relationship and signal amplitudes. According to the Cirrus Logic manufacturer datasheet, the converter operates from 1.71 V to 3.6 V; the host, I2S interface, and converter rails must therefore share compatible logic levels or use an appropriate translator. Keep switching-clock routes away from the analog input and provide a quiet return path for digital signals.

Do not assume that every WM8950 orderable suffix is interchangeable solely because the package drawing matches. Check the exact qualification, marking, temperature, and lead-finish requirements for WM8950CGEFL/RV, WM8950CGEFL/V, and WM8950GEFL-RV before changing the BOM. Also verify that the selected host expects the converter’s I2S channel format, sample-rate support, clock polarity, and bit ordering; a correct PCB footprint alone does not guarantee functional interchangeability.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Exact-suffix material-compliance declarations were not identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status using the current Cirrus Logic manufacturer documentation for WM8950CGEFL/RV.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

WM8950CGEFL/RV datasheet WM8950CGEFL/RV pinout WM8950CGEFL/RV specifications WM8950CGEFL/RV 24-QFN WM8950CGEFL/RV price WM8950CGEFL/RV stock WM8950CGEFL/RV replacement WM8950CGEFL/RV equivalent WM8950CGEFL/RV vs WM8950CGEFL/V Cirrus Logic WM8950CGEFL/RV WM8950 24-bit 48 kSPS ADC WM8950 digital microphone ADC WM8950 I2S audio converter WM8950CGEFL/RV footprint WM8950CGEFL/RV lead time

Composants & termes associés

Cirrus Logic WM8950CGEFL/RV WM8950CGEFL/V WM8950GEFL-RV PCM1865 AK4458 CS4272 audio ADC ADC/DAC delta-sigma converter data converter digital audio converter I2S DSP interface 24-bit resolution 48 kSPS mono microphone input 1.71 V to 3.6 V supply 24-QFN QFN family surface mount SMD exposed pad RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ