AMD

XA6SLX75-2FGG484I - 74,637-Cell Automotive FPGA | AMD

MPN: XA6SLX75-2FGG484I ✗ End of Life
1.2 V Vdss 484-pin FBGA Package 667 MHz Speed
MOQ: 1 |

XA6SLX75-2FGG484I Overview

The AMD XA6SLX75-2FGG484I is an automotive Spartan-6 LX field-programmable gate array with 74,637 logic cells, 280 I/O, a 1.2 V core supply, and a 484-pin FBGA package. It uses 45 nm CMOS technology and offers a -2 speed grade for automotive bridging, control, industrial automation, and system-integration designs.

An FPGA is a programmable semiconductor in the logic-device hierarchy, combining configurable logic blocks, programmable I/O, memory resources, and clocking blocks on one device. Because its digital architecture is configured after manufacture, an FPGA can implement parallel control logic, protocol bridges, signal processing, and embedded interfaces without requiring a fixed application-specific ASIC. The Spartan-6 LX family occupies the middle ground between low-cost FPGAs and larger programmable-logic devices.

The XA6SLX75-2FGG484I provides 5,831 configurable logic blocks, 74,637 logic cells, and up to 280 I/O according to the manufacturer product listing. Its 1.2 V core operation and 45 nm CMOS process support efficient implementation of automotive infotainment, networking, industrial control, and bridging functions. The -2 designation identifies the device speed grade, while the XA family suffix identifies the automotive-oriented XA Spartan-6 variant.

The device is offered in a 23 mm by 23 mm FBGA-484 package with 1.0 mm pitch. A 667 MHz internal frequency value is associated with the corresponding Spartan-6 LX 484-ball family listing, while individual interface and memory performance depend on the selected I/O standards, clocking resources, design configuration, and operating conditions. This distinction matters because advertised device or memory frequency is not equivalent to application throughput.

Typical uses include automotive infotainment and connectivity, industrial automation interfaces, data acquisition, display control, communications bridging, and embedded video-processing functions. The 280-I/O resource count gives a board designer substantial connectivity for external memories, transceivers, sensors, and mixed-signal interfaces. The automotive XA positioning is particularly relevant where operating-temperature qualification and product-lifecycle controls matter, but the exact temperature limits and qualification conditions must be confirmed in the device documentation.

PCB implementation requires careful FBGA-484 layout practices, including a controlled ball-grid footprint, adequate power and ground distribution, and design rules for high-speed memory and interface routing. Differential and other sensitive signals should follow the device-family PCB guidelines. Since the package has 484 balls, a conventional two-dimensional symbol is impractical; use the manufacturer land pattern and pinout tables directly during schematic capture and PCB-library creation.

This product page combines the key device identity, verified package and resource details, automotive qualification context, practical design guidance, and carefully qualified pin-compatible alternatives. The comparison information helps distinguish grade, speed, and package variants without treating every similarly named FPGA as an unconditional drop-in replacement.

Drop-in alternatives for XA6SLX75-2FGG484I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with XA6SLX75-2FGG484I (same form factor and footprint) — differing in Device Family, Logic Cells, Speed Grade, Device Type, Mounting Type.

AMD
Device Type: Spartan-6 LX automotive FPGA
Compare with XA6SLX75-2FGG484I →
AMD
Device Family: Spartan-6 LX
Logic Cells: 74,637
Speed Grade: -2 (mid-range)
Compare with XA6SLX75-2FGG484I →

XC6SLX75-2FGG484I

✅ Drop-In
AMD
📦 FBGA-484
Spartan-6 LX · 74,637 · 11,650 slices · 3,170,304 · 4,824 Kbits (180 x 18 Kbit) · 132 · 280 · 667 MHz

Contact for price

View Datasheet →

XA6SLX75-2FGG484C

✅ Drop-In
📦 FBGA-484
Different ordering grade, with nominal logic-cell and speed-grade parity at 74,637 cells and -2; qualification and temperature requirements must be checked before substitution.

📋 Reference alternative (not in catalog)

XA6SLX75-2FG484I

✅ Drop-In
📦 FBGA-484
Ordering-code variant with the same nominal 74,637 logic cells, 1.2 V core, and 484-pin family; verify ball assignments and ordering-grade requirements before production use.

📋 Reference alternative (not in catalog)

XA6SLX75-3FGG484I

✅ Drop-In
📦 FBGA-484
Uses the -3 speed grade rather than -2 while retaining the 74,637-cell resource level and 484-ball package; timing performance differs by speed grade.

📋 Reference alternative (not in catalog)

XA6SLX75T-2FGG484I

✅ Drop-In
📦 FBGA-484
Provides 268 I/O versus 280 I/O on the target, a reduction of 12 I/O or approximately 4.3%, while retaining the -2 speed grade and 484-ball package family.

📋 Reference alternative (not in catalog)

XA6SLX75-2FGG484I Maximum Ratings & Electrical Characteristics

Device Type Spartan-6 LX XA FPGA
Logic Cells 74,637 cells
Configurable Logic Blocks 5,831 CLBs
User I/O 280 I/O
Core Supply Voltage 1.2 V
Process Technology 45 nm CMOS
Maximum Device Frequency 667 MHz
Package Type 484-pin FBGA
Package Dimensions 23 mm x 23 mm
Package Pitch 1.0 mm
Total Package Balls or Pins 484
Speed Grade -2
Device Family Spartan-6 LX XA
Programmable Logic Type FPGA
Mounting Type Surface Mount
Automotive Qualification AEC-Q100

XA6SLX75-2FGG484I 484 Pin Configuration Guide

Pin configuration for XA6SLX75-2FGG484I (484 package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

484 package pinout diagram for XA6SLX75-2FGG484I

No detailed pinout data available for XA6SLX75-2FGG484I.

Refer to the datasheet for full pin configuration.

Typical Applications

XA6SLX75-2FGG484I is suitable for 6 applications: Automotive Infotainment Controller, Industrial Networking Bridge, Data Acquisition and Signal Conditioning, Display and Video Interface Control, Machine Vision and Image Processing, Factory Automation and Programmable Control.

🚗

Automotive Infotainment Controller

The XA6SLX75-2FGG484I fits automotive infotainment designs that need substantial programmable logic and a large external interface count. Its 74,637 logic cells can consolidate display control, audio routing, communication protocols, and vehicle-network logic, while 280 I/O provides connections to external memory, transceivers, amplifiers, and human-machine-interface circuits. The automotive AEC-Q100 designation supports use in vehicle electronic systems. Engineering teams should still validate the exact operating-temperature grade, power sequencing, configuration method, and peripheral compliance for the production program.

🌐

Industrial Networking Bridge

The XA6SLX75-2FGG484I is suitable for industrial gateways and protocol bridges requiring parallel logic rather than a soft processor alone. Engineers can use programmable logic for Ethernet or serial-data framing, buffering, filtering, and deterministic control while the 280 I/O connect multiple transceivers and sensors. The 1.2 V core and 45 nm CMOS implementation support compact, power-conscious equipment designs. For production industrial systems, confirm the required temperature range, isolation strategy, grounding, EMC design, and long-term device-availability requirements.

⚡

Data Acquisition and Signal Conditioning

The XA6SLX75-2FGG484I can implement parallel data acquisition, sensor conditioning, digital filtering, and timestamp processing in programmable logic. Its 5,831 configurable logic blocks provide substantial capacity for acquisition pipelines, while 280 I/O allow multiple converters, sensors, and memory devices to operate concurrently. The device is especially useful when deterministic timing and flexible logic are more important than a fixed controller configuration. Designers should use the manufacturer clocking and I/O guidance to constrain timing, select compatible electrical standards, and verify analog front-end behavior independently of the FPGA.

📺

Display and Video Interface Control

The XA6SLX75-2FGG484I is well suited to display timing, pixel processing, video-format conversion, and control logic for embedded display systems. Its 74,637 logic cells can implement multiple parallel pipelines, and the 280-I/O device provides connectivity for panel interfaces, memory, and timing-control signals. A programmable architecture also allows product variants to share the same PCB while changing video timing or test features. Engineering teams should establish achievable pixel-clock and memory-interface rates from the relevant device performance tables rather than treating the 667 MHz device-frequency listing as guaranteed display throughput.

🎥

Machine Vision and Image Processing

The XA6SLX75-2FGG484I supports machine-vision preprocessing, pixel classification, frame synchronization, and sensor-interface logic where parallel datapaths and deterministic control are valuable. The 74,637 logic cells allow designers to combine image processing with communication and system-control functions, while 280 I/O can connect image sensors, memory, and capture electronics. The automotive-qualified XA family can also serve vision nodes in vehicle systems, although lighting, vibration, temperature, and functional-safety requirements must be assessed at the system level.

🏭

Factory Automation and Programmable Control

The XA6SLX75-2FGG484I can consolidate factory-control sequencing, motion-command logic, safety interlocks, communications, and diagnostics in one programmable device. Its large logic-cell count supports parallel axis control and deterministic state machines, while the 280 I/O connect encoders, I/O modules, motor interfaces, and industrial networks. The 1.2 V core helps simplify multi-rail power design, but the complete power tree still requires sequencing, filtering, current-budget analysis, and adequate thermal planning. Use the manufacturer design tools and timing constraints to validate each industrial control path.

Recommended Products Summary

XA6SLX75T-2FGG484I Package-family Spartan-6 LX option for lower-I/O design variants Used in: Automotive Infotainment Controller, Display and Video Interface Control XC6SLX75-2FGG484I AMD Used in: Automotive Infotainment Controller, Industrial Networking Bridge, Display and Video Interface Control, Machine Vision and Image Processing XA6SLX75-2FGG484C Spartan-6 LX package-family ordering variant for grade review Used in: Industrial Networking Bridge, Machine Vision and Image Processing XA6SLX75-2FG484I Spartan-6 LX package-family logic-resource counterpart Used in: Data Acquisition and Signal Conditioning, Factory Automation and Programmable Control XA6SLX75-3FGG484I Higher speed-grade package-family option for timing review Used in: Data Acquisition and Signal Conditioning, Factory Automation and Programmable Control
What is the AMD XA6SLX75-2FGG484I?
The AMD XA6SLX75-2FGG484I is an automotive Spartan-6 LX FPGA with 74,637 logic cells, 5,831 configurable logic blocks, 280 user I/O, and a 484-pin FBGA package. According to AMD/Xilinx product information, the device is manufactured on 45 nm CMOS technology, operates from a 1.2 V core, and carries the -2 speed grade. Its combination of programmable logic, extensive I/O, and automotive AEC-Q100 positioning makes it suitable for vehicle infotainment, industrial bridging, control, and data-acquisition systems.
How many logic cells and I/O does XA6SLX75-2FGG484I have?
The XA6SLX75-2FGG484I contains 74,637 logic cells organized into 5,831 configurable logic blocks and provides 280 user I/O. These figures are identified in AMD/Xilinx product listings for the exact XA Spartan-6 LX device. The 280 I/O positions support connections to memory, transceivers, sensors, display interfaces, and control logic. Designers should also account for the pins consumed by configuration, power, ground, clocking, and dedicated functions when planning external connectivity.
What package does XA6SLX75-2FGG484I use?
The XA6SLX75-2FGG484I uses a 484-pin FBGA package measuring 23 mm by 23 mm with a 1.0 mm ball pitch. The package is intended for surface-mount PCB assembly and requires a corresponding 484-ball land pattern, solder-mask design, and assembly process. Because an FBGA-484 footprint is too dense for a conventional symbol, use the manufacturer package drawing and pinout tables when creating the PCB library rather than relying on a generic 484-pin symbol.
Is XA6SLX75-2FGG484I suitable for automotive applications?
Yes, the XA6SLX75-2FGG484I is identified as an automotive Spartan-6 LX FPGA with AEC-Q100 qualification. Its 74,637 logic cells and 280 I/O allow implementation of vehicle infotainment, connectivity, data acquisition, and control functions in a single programmable device. The automotive designation does not mean every peripheral or interface automatically meets automotive requirements; confirm temperature range, voltage limits, qualification status, and external component requirements in the device documentation.
What is the difference between XA6SLX75-2FGG484I and XC6SLX75-2FGG484I?
The principal documented difference is the product grade: XA6SLX75-2FGG484I is the automotive XA Spartan-6 LX variant, while XC6SLX75-2FGG484I is the standard Spartan-6 LX ordering variant. Both are associated with the 484-ball package family and the -2 speed grade. Choose the XA device when automotive qualification is required; use the XC device only after confirming that its temperature range, qualification status, lifecycle commitments, and sourcing conditions satisfy the system requirements.
Can XA6SLX75-2FGG484I replace XC6SLX75-2FGG484I?
The XA6SLX75-2FGG484I can be considered a package-aligned replacement for XC6SLX75-2FGG484I when the automotive qualification and operating-temperature requirements are acceptable. Both devices use the 484-ball Spartan-6 LX package family and the -2 speed grade, while the XA version is identified as AEC-Q100 qualified. Final design approval should verify the complete pinout, supported I/O standards, configuration requirements, power sequencing, temperature range, and any device-specific differences in the manufacturer documentation.
When should I choose XA6SLX75-2FGG484I over XA6SLX75T-2FGG484I?
Choose XA6SLX75-2FGG484I when the design requires the 280-I/O Spartan-6 LX resource level and does not require the additional feature set associated with the T ordering variant. The T listing identifies 268 I/O, which is 12 fewer than the target device, or approximately 4.3% less external I/O capacity. That difference can affect memory interface count, transceiver connectivity, and board-level pin assignment even when both devices use a 484-ball package family.
What can replace XA6SLX75-2FGG484I?
The closest package-aligned replacements include XC6SLX75-2FGG484I, XA6SLX75-2FGG484C, and XA6SLX75-2FG484I, subject to qualification and lifecycle review. Replacement is not determined by the FBGA-484 label alone: logic capacity, I/O count, temperature grade, automotive qualification, speed grade, configuration scheme, and every dedicated ball must be compared. Use the manufacturer pin tables and device documentation to approve a substitution for production rather than relying only on the commercial description.
Is XA6SLX75-2FGG484I the same as XA6SLX75-2FGG484Q?
No, the final ordering suffix must not be ignored. XA6SLX75-2FGG484I and XA6SLX75-2FGG484Q share the XA Spartan-6 LX family, 74,637-cell resource level, -2 speed grade, and 484-ball package naming, but their ordering codes indicate different device variants. Confirm the exact temperature-grade, qualification, or lifecycle designation in the AMD ordering guide. A mechanical package match alone does not establish that one ordering code can replace the other.
Where can I download the XA6SLX75-2FGG484I datasheet PDF?
The XA6SLX75-2FGG484I datasheet and supporting documents are available through the AMD/Xilinx product documentation channels linked from the device product pages. Use the official data sheet, package drawing, pinout, and errata documents to establish the authoritative specifications. Avoid substituting a document for the closely related XC6SLX75 or XA6SLX75T because ordering suffixes can represent different qualification, temperature, and lifecycle conditions.
Where can I find the XA6SLX75-2FGG484I pinout?
The XA6SLX75-2FGG484I pinout is found in the manufacturer's 484-pin package documentation and device pin tables. Use these documents to map configuration pins, power, ground, clock, user I/O, and dedicated functions to the 23 mm by 23 mm, 1.0 mm-pitch FBGA land pattern. Do not construct the footprint solely from the commercial listing or a generic 484-pin symbol, because dedicated-ball assignments and package drawing details are essential for a manufacturable PCB.
How do XA6SLX75-2FGG484I and XA6SLX75-3FGG484I differ?
XA6SLX75-2FGG484I uses the -2 speed grade, while XA6SLX75-3FGG484I uses the -3 speed grade within the same 74,637-cell Spartan-6 LX XA family. A faster grade can improve achievable timing in demanding designs, but the -3 version should not be selected solely from its grade designation. Review the relevant datasheet performance tables, power characteristics, qualification conditions, availability, and lifecycle status for the exact ordering codes before using it as a production replacement.
Where to buy XA6SLX75-2FGG484I online?
Use the Request a Quote form on this page to request the exact AMD XA6SLX75-2FGG484I, including desired quantity, delivery location, and production schedule. The form allows procurement teams to confirm current source availability, authorized-channel status, and shipment planning without relying on a stale listing price. Before ordering, ask the supplier to confirm the full ordering code, 484-ball package, automotive qualification status, and operating-temperature requirements.
What is the price of XA6SLX75-2FGG484I?
Current pricing for the XA6SLX75-2FGG484I depends on quantity, market conditions, and the channel supporting the order. Use the Request a Quote form on this page to obtain a quantity-specific quotation for the exact MPN. The request should specify whether the order is for prototype evaluation, production quantities, or scheduled automotive programs so that allocation and lifecycle considerations can be included in the response.
What is the lead time for XA6SLX75-2FGG484I?
Lead time for XA6SLX75-2FGG484I depends on current inventory, lot allocation, qualification requirements, and production volume. Submit the required quantity, ship-to location, and target date through the Request a Quote form on this page. For automotive production programs, include the required delivery horizon and traceability needs in the request so that the supplier can confirm a realistic schedule for the exact device ordering code.

Engineering reference data for XA6SLX75-2FGG484I — comparison, design guidance, and compliance information.

Selection Guide

Choose the XA6SLX75-2FGG484I when a design needs the 74,637-cell Spartan-6 LX architecture, 280 I/O, the -2 speed grade, and automotive AEC-Q100 positioning. Select XC6SLX75-2FGG484I only when the standard XC grade satisfies the temperature, qualification, lifecycle, and sourcing requirements. Use XA6SLX75-2FGG484C or XA6SLX75-2FG484I as package-family candidates only after checking their ordering-grade and pin-table details. Consider XA6SLX75-3FGG484I when the -3 timing grade is justified and power, thermal, qualification, and availability conditions are acceptable. XA6SLX75T-2FGG484I is the least I/O-rich option because it provides 268 I/O rather than 280. In every case, approve the substitution against the manufacturer package drawing, pinout, configuration requirements, and timing constraints rather than package name alone.

Comparison with Alternatives

Parameter This Product XC6SLX75-2FGG484I XA6SLX75-2FGG484C XA6SLX75-2FG484I XA6SLX75-3FGG484I XA6SLX75T-2FGG484I
Brand AMD AMD AMD AMD AMD AMD
Package FBGA-484 FBGA-484 FBGA-484 FBGA-484 FBGA-484 FBGA-484
Logic Cells 74,637 cells 74,637 cells 74,637 cells 74,637 cells 74,637 cells 74,637 cells
Configurable Logic Blocks 5,831 CLBs 5,831 CLBs 5,831 CLBs 5,831 CLBs 5,831 CLBs 5,831 CLBs
User I/O 280 I/O 280 I/O 280 I/O 280 I/O 280 I/O 268 I/O
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Process Technology 45 nm CMOS 45 nm CMOS 45 nm CMOS 45 nm CMOS 45 nm CMOS 45 nm CMOS
Speed Grade -2 -2 -2 -2 -3 -2
Automotive Qualification AEC-Q100 Standard Spartan-6 LX product grade Ordering-grade qualification review required Automotive ordering code Automotive ordering code Automotive XA ordering code

Key Differentiators

  • Automotive XA product positioning (vs XC6SLX75-2FGG484I)
  • Larger external I/O resource than the T variant (vs XA6SLX75T-2FGG484I)
  • Lower speed grade than the -3 device (vs XA6SLX75-3FGG484I)

Design Notes

Create the PCB footprint directly from the AMD/Xilinx FBGA-484 package drawing for the exact Spartan-6 LX device. Account for the 23 mm by 23 mm body, 1.0 mm ball pitch, pad and solder-mask definitions, exposed thermal requirements, and assembly tolerances. Validate the footprint with the package drawing and fabrication capability before release. Do not substitute a generic BGA library footprint because ball assignments, power distribution, and thermal-via requirements are device-specific.

Design the 1.2 V core rail and associated I/O supplies from the exact device power-consumption tables under worst-case clocking, temperature, and I/O activity. Use the manufacturer's recommended decoupling topology and place the smallest high-frequency capacitors directly between the relevant supply and ground balls. Confirm power-up sequencing, ramp limits, voltage tolerances, and the relationship between core and auxiliary I/O supplies before connecting external circuitry.

Route clocks and high-speed interfaces as controlled-impedance nets using the stack-up and constraints from the manufacturer design guidelines. Keep configuration paths away from sensitive high-speed inputs, provide continuous return paths beneath signal layers, and separate noisy switching regions from precision analog-adjacent sections of the board. Although the FPGA is digital, poor return-path continuity can corrupt clocks, memory signals, and differential interfaces just as it does on a conventional processor board.

Do not infer drop-in status from the shared FBGA-484 package alone. Confirm every dedicated ball, configuration mode, power rail, I/O standard, speed grade, temperature range, and qualification condition for the alternative ordering code. The XA6SLX75T-2FGG484I, for example, is listed with 268 I/O versus 280 I/O on the target, while the -3 and -2 parts differ in speed grade. Validate the exact replacement in the AMD tools and schematic before fabrication.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact XA6SLX75-2FGG484I is identified as an automotive AEC-Q100 Spartan-6 LX XA device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not confirmed for this exact ordering code.

Related Searches

XA6SLX75-2FGG484I datasheet XA6SLX75-2FGG484I pinout XA6SLX75-2FGG484I specifications XA6SLX75-2FGG484I equivalent XA6SLX75-2FGG484I replacement XA6SLX75-2FGG484I price XA6SLX75-2FGG484I stock AMD XA6SLX75-2FGG484I XA6SLX75 automotive FPGA XA6SLX75-2FGG484I FBGA-484 XA6SLX75-2FGG484I vs XC6SLX75-2FGG484I XA6SLX75-2FGG484I 74637 logic cells

Related Components & Terms

AMD AMD/Xilinx XA6SLX75-2FGG484I XC6SLX75-2FGG484I XA6SLX75-2FGG484C XA6SLX75-2FG484I XA6SLX75-3FGG484I XA6SLX75T-2FGG484I Spartan-6 LX Spartan-6 XA Field-programmable gate array FPGA Programmable logic Logic cells Configurable logic blocks 45 nm CMOS 1.2 V core 667 MHz FBGA-484 BGA package Surface-mount technology AEC-Q100 RoHS REACH Automotive infotainment Industrial automation Programmable control Data acquisition Signal integrity I/O voltage standards
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details