XA6SLX75-2FGG484I - 74,637-Cell Automotive FPGA | AMD
MPN: XA6SLX75-2FGG484I ✗ اختتامِ زندگیXA6SLX75-2FGG484I جائزہ
An FPGA is a programmable semiconductor in the logic-device hierarchy, combining configurable logic blocks, programmable I/O, memory resources, and clocking blocks on one device. Because its digital architecture is configured after manufacture, an FPGA can implement parallel control logic, protocol bridges, signal processing, and embedded interfaces without requiring a fixed application-specific ASIC. The Spartan-6 LX family occupies the middle ground between low-cost FPGAs and larger programmable-logic devices.
The XA6SLX75-2FGG484I provides 5,831 configurable logic blocks, 74,637 logic cells, and up to 280 I/O according to the manufacturer product listing. Its 1.2 V core operation and 45 nm CMOS process support efficient implementation of automotive infotainment, networking, industrial control, and bridging functions. The -2 designation identifies the device speed grade, while the XA family suffix identifies the automotive-oriented XA Spartan-6 variant.
The device is offered in a 23 mm by 23 mm FBGA-484 package with 1.0 mm pitch. A 667 MHz internal frequency value is associated with the corresponding Spartan-6 LX 484-ball family listing, while individual interface and memory performance depend on the selected I/O standards, clocking resources, design configuration, and operating conditions. This distinction matters because advertised device or memory frequency is not equivalent to application throughput.
Typical uses include automotive infotainment and connectivity, industrial automation interfaces, data acquisition, display control, communications bridging, and embedded video-processing functions. The 280-I/O resource count gives a board designer substantial connectivity for external memories, transceivers, sensors, and mixed-signal interfaces. The automotive XA positioning is particularly relevant where operating-temperature qualification and product-lifecycle controls matter, but the exact temperature limits and qualification conditions must be confirmed in the device documentation.
PCB implementation requires careful FBGA-484 layout practices, including a controlled ball-grid footprint, adequate power and ground distribution, and design rules for high-speed memory and interface routing. Differential and other sensitive signals should follow the device-family PCB guidelines. Since the package has 484 balls, a conventional two-dimensional symbol is impractical; use the manufacturer land pattern and pinout tables directly during schematic capture and PCB-library creation.
This product page combines the key device identity, verified package and resource details, automotive qualification context, practical design guidance, and carefully qualified pin-compatible alternatives. The comparison information helps distinguish grade, speed, and package variants without treating every similarly named FPGA as an unconditional drop-in replacement.
کے لیے ڈراپ اِن متبادل XA6SLX75-2FGG484I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XA6SLX75-2FGG484I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Device Family, Logic Cells, Speed Grade, Device Type, Mounting Type.
XC6SLX75-2FGG484I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XA6SLX75-2FGG484C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XA6SLX75-2FG484I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XA6SLX75-3FGG484I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XA6SLX75T-2FGG484I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XA6SLX75-2FGG484I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Spartan-6 LX XA FPGA |
| Logic Cells | 74,637 cells |
| Configurable Logic Blocks | 5,831 CLBs |
| User I/O | 280 I/O |
| Core Supply Voltage | 1.2 V |
| Process Technology | 45 nm CMOS |
| Maximum Device Frequency | 667 MHz |
| Package Type | 484-pin FBGA |
| Package Dimensions | 23 mm x 23 mm |
| Package Pitch | 1.0 mm |
| Total Package Balls or Pins | 484 |
| Speed Grade | -2 |
| Device Family | Spartan-6 LX XA |
| Programmable Logic Type | FPGA |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Automotive Qualification | AEC-Q100 |
XA6SLX75-2FGG484I 484 پن کنفیگریشن گائیڈ
XA6SLX75-2FGG484I (484 پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XA6SLX75-2FGG484I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XA6SLX75-2FGG484I کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Infotainment Controller, Industrial Networking Bridge, Data Acquisition and Signal Conditioning, Display and Video Interface Control, Machine Vision and Image Processing, Factory Automation and Programmable Control.
Automotive Infotainment Controller
The XA6SLX75-2FGG484I fits automotive infotainment designs that need substantial programmable logic and a large external interface count. Its 74,637 logic cells can consolidate display control, audio routing, communication protocols, and vehicle-network logic, while 280 I/O provides connections to external memory, transceivers, amplifiers, and human-machine-interface circuits. The automotive AEC-Q100 designation supports use in vehicle electronic systems. Engineering teams should still validate the exact operating-temperature grade, power sequencing, configuration method, and peripheral compliance for the production program.
تجویز کردہ
Industrial Networking Bridge
The XA6SLX75-2FGG484I is suitable for industrial gateways and protocol bridges requiring parallel logic rather than a soft processor alone. Engineers can use programmable logic for Ethernet or serial-data framing, buffering, filtering, and deterministic control while the 280 I/O connect multiple transceivers and sensors. The 1.2 V core and 45 nm CMOS implementation support compact, power-conscious equipment designs. For production industrial systems, confirm the required temperature range, isolation strategy, grounding, EMC design, and long-term device-availability requirements.
تجویز کردہ
Data Acquisition and Signal Conditioning
The XA6SLX75-2FGG484I can implement parallel data acquisition, sensor conditioning, digital filtering, and timestamp processing in programmable logic. Its 5,831 configurable logic blocks provide substantial capacity for acquisition pipelines, while 280 I/O allow multiple converters, sensors, and memory devices to operate concurrently. The device is especially useful when deterministic timing and flexible logic are more important than a fixed controller configuration. Designers should use the manufacturer clocking and I/O guidance to constrain timing, select compatible electrical standards, and verify analog front-end behavior independently of the FPGA.
تجویز کردہ
Display and Video Interface Control
The XA6SLX75-2FGG484I is well suited to display timing, pixel processing, video-format conversion, and control logic for embedded display systems. Its 74,637 logic cells can implement multiple parallel pipelines, and the 280-I/O device provides connectivity for panel interfaces, memory, and timing-control signals. A programmable architecture also allows product variants to share the same PCB while changing video timing or test features. Engineering teams should establish achievable pixel-clock and memory-interface rates from the relevant device performance tables rather than treating the 667 MHz device-frequency listing as guaranteed display throughput.
تجویز کردہ
Machine Vision and Image Processing
The XA6SLX75-2FGG484I supports machine-vision preprocessing, pixel classification, frame synchronization, and sensor-interface logic where parallel datapaths and deterministic control are valuable. The 74,637 logic cells allow designers to combine image processing with communication and system-control functions, while 280 I/O can connect image sensors, memory, and capture electronics. The automotive-qualified XA family can also serve vision nodes in vehicle systems, although lighting, vibration, temperature, and functional-safety requirements must be assessed at the system level.
تجویز کردہ
Factory Automation and Programmable Control
The XA6SLX75-2FGG484I can consolidate factory-control sequencing, motion-command logic, safety interlocks, communications, and diagnostics in one programmable device. Its large logic-cell count supports parallel axis control and deterministic state machines, while the 280 I/O connect encoders, I/O modules, motor interfaces, and industrial networks. The 1.2 V core helps simplify multi-rail power design, but the complete power tree still requires sequencing, filtering, current-budget analysis, and adequate thermal planning. Use the manufacturer design tools and timing constraints to validate each industrial control path.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XA6SLX75-2FGG484I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC6SLX75-2FGG484I | XA6SLX75-2FGG484C | XA6SLX75-2FG484I | XA6SLX75-3FGG484I | XA6SLX75T-2FGG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FBGA-484 | FBGA-484 | FBGA-484 | FBGA-484 | FBGA-484 | FBGA-484 |
| Logic Cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells |
| Configurable Logic Blocks | 5,831 CLBs | 5,831 CLBs | 5,831 CLBs | 5,831 CLBs | 5,831 CLBs | 5,831 CLBs |
| User I/O | 280 I/O | 280 I/O | 280 I/O | 280 I/O | 280 I/O | 268 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Speed Grade | -2 | -2 | -2 | -2 | -3 | -2 |
| Automotive Qualification | AEC-Q100 | Standard Spartan-6 LX product grade | Ordering-grade qualification review required | Automotive ordering code | Automotive ordering code | Automotive XA ordering code |
اہم امتیازی خصوصیات
- Automotive XA product positioning (بمقابلہXC6SLX75-2FGG484I)
- Larger external I/O resource than the T variant (بمقابلہXA6SLX75T-2FGG484I)
- Lower speed grade than the -3 device (بمقابلہXA6SLX75-3FGG484I)
ڈیزائن نوٹس
Create the PCB footprint directly from the AMD/Xilinx FBGA-484 package drawing for the exact Spartan-6 LX device. Account for the 23 mm by 23 mm body, 1.0 mm ball pitch, pad and solder-mask definitions, exposed thermal requirements, and assembly tolerances. Validate the footprint with the package drawing and fabrication capability before release. Do not substitute a generic BGA library footprint because ball assignments, power distribution, and thermal-via requirements are device-specific.
Design the 1.2 V core rail and associated I/O supplies from the exact device power-consumption tables under worst-case clocking, temperature, and I/O activity. Use the manufacturer's recommended decoupling topology and place the smallest high-frequency capacitors directly between the relevant supply and ground balls. Confirm power-up sequencing, ramp limits, voltage tolerances, and the relationship between core and auxiliary I/O supplies before connecting external circuitry.
Route clocks and high-speed interfaces as controlled-impedance nets using the stack-up and constraints from the manufacturer design guidelines. Keep configuration paths away from sensitive high-speed inputs, provide continuous return paths beneath signal layers, and separate noisy switching regions from precision analog-adjacent sections of the board. Although the FPGA is digital, poor return-path continuity can corrupt clocks, memory signals, and differential interfaces just as it does on a conventional processor board.
Do not infer drop-in status from the shared FBGA-484 package alone. Confirm every dedicated ball, configuration mode, power rail, I/O standard, speed grade, temperature range, and qualification condition for the alternative ordering code. The XA6SLX75T-2FGG484I, for example, is listed with 268 I/O versus 280 I/O on the target, while the -3 and -2 parts differ in speed grade. Validate the exact replacement in the AMD tools and schematic before fabrication.
تعمیل کی معلومات
The exact XA6SLX75-2FGG484I is identified as an automotive AEC-Q100 Spartan-6 LX XA device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not confirmed for this exact ordering code.