XC5VLX50T-1FFG665I - 46,080-Cell FPGA | AMD | Industrial Control
MPN: XC5VLX50T-1FFG665I ✗ End of LifeXC5VLX50T-1FFG665I Overview
A field-programmable gate array is a semiconductor whose digital logic and interconnect can be programmed after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and reconfigurable processor. The Virtex-5 LXT family is designed for high-performance signal processing, communications, networking, embedded systems, and industrial equipment requiring substantial parallel processing and flexible hardware configuration.
The XC5VLX50T provides 46,080 logic cells, 360 I/O, and approximately 2,211,840 bits of block RAM. Its 1 V core voltage supports dense high-performance designs, while dedicated DSP blocks and serial transceiver resources make it suitable for filtering, protocol handling, signal transformation, and high-speed data movement. The -1 speed designation identifies the device's performance grade within the Virtex-5 family.
The FFG package is a flip-chip ball-grid-array construction that places the die directly beneath the package substrate and connects it through an array of solder balls. A 665-terminal FCBGA offers a high pin count for external memory interfaces, parallel buses, clocks, controls, and high-speed transceiver pins. Its fine interconnect pitch requires careful PCB layout, layer-stack management, thermal design, and assembly-process control.
Typical applications include telecommunications line cards, industrial control systems, test and measurement platforms, video processing, network interface equipment, embedded signal-processing subsystems, and aerospace or defense platforms. The combination of 360 I/O, 46,080 logic cells, configurable memory, and dedicated processing resources supports parallel architectures that would otherwise require multiple programmable devices.
For a new Virtex-5 LXT design, verify the selected speed grade, temperature suffix, package drawing, pin assignments, configuration interface, supported memory interfaces, and transceiver requirements against the manufacturer datasheet. PCB power delivery must accommodate the 1 V core rail and auxiliary supplies while maintaining low noise and adequate thermal performance during sustained operation.
This page organizes the core device characteristics, package identity, verified sourcing information, application guidance, and design considerations into a concise engineering reference. It also distinguishes true same-footprint alternatives from larger-package FPGA options so designers can assess migration risk before changing a production schematic or PCB.
Drop-in alternatives for XC5VLX50T-1FFG665I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC5VLX50T-1FFG665I (same form factor and footprint) — differing in Device Type, Package, Mounting Type, Architecture, Speed Grade.
XC5VLX50T-1FFG665CES
✅ Drop-InContact for price
View Datasheet →XC5VLX50T-2FFG665I
✅ Drop-InContact for price
View Datasheet →XC5VLX50T-2FFG665C
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC5VLX50T-1FFV665I
✅ Drop-In📋 Reference alternative (not in catalog)
XC5VLX50T-1FF665I
✅ Drop-InContact for price
View Datasheet →XC5VLX50T-1FFG665I Maximum Ratings & Electrical Characteristics
| Device Type | Virtex-5 LXT Field-Programmable Gate Array |
| Logic Cells | 46,080 cells |
| User I/O | 360 I/O |
| Block RAM | 2,211,840 bits |
| Core Supply Voltage | 1 V |
| Package Type | 665-BBGA, FCBGA |
| Terminal Count | 665 terminals |
| Speed Grade | -1 |
| Temperature Grade Suffix | I |
| Architecture | ASMBL column-based architecture |
| Mounting Type | Surface Mount |
| Logic Cell Count | 46,080 cells |
| Dedicated Output Count | 360 outputs |
XC5VLX50T-1FFG665I 665-bbga, fcbga Pin Configuration Guide
Pin configuration for XC5VLX50T-1FFG665I (665-bbga, fcbga package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC5VLX50T-1FFG665I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC5VLX50T-1FFG665I is suitable for 6 applications: Industrial Control Systems, Telecommunications Line Cards, Test and Measurement Instruments, Embedded Signal Processing, Video Processing Modules, Aerospace and Defense Systems.
Industrial Control Systems
The XC5VLX50T-1FFG665I fits industrial controllers that combine extensive parallel I/O with programmable signal processing. Its 360 I/O can support digital machine inputs, actuator outputs, communication interfaces, clock distribution, and service signals, while 46,080 logic cells provide capacity for sequencing, diagnostics, protocol state machines, and safety-related control logic. The 2,211,840 bits of block RAM allow buffering of sampled data or histories without relying entirely on external memory. A 1 V core rail and the 665-terminal FCBGA require a carefully planned multilayer PCB with local decoupling, adequate ball-routing space, and thermal validation under sustained controller activity.
Recommended
Telecommunications Line Cards
The XC5VLX50T-1FFG665I is appropriate for telecommunications line-card functions requiring parallel packet handling, filtering, and interface termination. Its 46,080 logic cells support multiple concurrent channels and control planes, while 360 I/O provide extensive connectivity to backplane fabrics, clocks, status signals, and external processors. The 2,211,840 bits of block RAM can implement packet buffers, timing structures, and data-conversion stages. Designers should allocate dedicated resources systematically and verify the required transceiver, differential I/O, and clocking features against the manufacturer architecture tables. The FCBGA layout also demands impedance-controlled routing, sound power-distribution design, and thermal analysis for continuously active line-card equipment.
Recommended
Test and Measurement Instruments
The XC5VLX50T-1FFG665I supports programmable test and measurement systems that acquire, transform, and route several data streams in parallel. Its 46,080 logic cells can host acquisition control, trigger logic, pattern generation, digital signal processing, and communication protocols, while the 360 I/O offer extensive access to external converters, memory, instruments, and synchronization signals. Block RAM of 2,211,840 bits allows local storage of samples, correlation windows, or intermediate results. The 1 V core supply should be referenced to a low-noise source, and clock jitter, skew, and synchronization must be controlled at the board level. Validate timing closure against the selected -1 speed grade and the target instrument's operating temperature.
Recommended
Embedded Signal Processing
The XC5VLX50T-1FFG665I is suited to embedded signal-processing subsystems that need deterministic parallel arithmetic and configurable memory. The 46,080 logic cells can organize control, buffering, filtering, and data-format conversion, while the device's DSP resources support higher-throughput operations than general-purpose lookup-table logic alone. Its 360 I/O enable direct connection to converters, external memory, and specialized peripherals, and 2,211,840 bits of block RAM can reduce external-memory traffic for intermediate results. Engineers should map arithmetic pipelines to dedicated DSP resources and budget clocking, control signals, and memory bandwidth. Because the device uses a dense 665-terminal FCBGA, assembly yield, board warpage, via-in-pad practice, and reflow profiles deserve early attention.
Recommended
Video Processing Modules
The XC5VLX50T-1FFG665I can implement parallel video processing when a design fits its 46,080 logic cells and 360 I/O. Pixel transport, color conversion, thresholding, filtering, frame timing, and interface adaptation are natural FPGA workloads, and the 2,211,840 bits of block RAM provide line or tile buffers for many streaming architectures. The device's DSP resources can accelerate fixed-point operations while programmable logic handles control and format conversion. Engineers must balance bandwidth between the external video interface, memory, and DSP pipeline because raw pixel rates can exhaust internal resources even when the logic-cell count appears sufficient. Use synchronous clocking, registered interfaces, and timing analysis across all video paths, while checking thermal conditions for continuously active displays or surveillance equipment.
Recommended
Aerospace and Defense Systems
The XC5VLX50T-1FFG665I is technically relevant to aerospace, defense, and rugged embedded systems requiring deterministic parallel logic and a large I/O boundary. Its 46,080 logic cells can support guidance, navigation, communications, data-acquisition, and fault-monitoring functions, while 360 I/O connect sensors, memory, timing references, and external subsystems. The 2,211,840-bit block RAM supports local buffering and fault-tolerant data handling. The I ordering suffix identifies the temperature-grade family, but deployment approval also depends on the exact operating limits, qualification records, screening, and system reliability requirements. The dense FCBGA demands controlled assembly processes, inspection, and thermal analysis, particularly where vibration, temperature cycling, or long field life increases interconnect risk.
Recommended
Recommended Products Summary
Engineering reference data for XC5VLX50T-1FFG665I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC5VLX50T-1FFG665C | XC5VLX50T-2FFG665I | XC5VLX50T-2FFG665C | XC5VLX50T-1FFV665I | XC5VLX50T-1FF665I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA |
| Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| User I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O |
| Block RAM | 2,211,840 bits | 2,211,840 bits | 2,211,840 bits | 2,211,840 bits | 2,211,840 bits | 2,211,840 bits |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Package Terminal Count | 665 terminals | 665 terminals | 665 terminals | 665 terminals | 665 terminals | 665 terminals |
| Speed Grade | -1 | -1 | -2 | -2 | -1 | -1 |
| Temperature Grade Suffix | I | C | I | C | I | I |
| Series | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT |
Key Differentiators
- Maintains the full listed processing and interface resource set across close same-package alternatives (vs XC5VLX50T-1FFG665C)
- The -1 grade provides a defined performance option while retaining the same 665-terminal package (vs XC5VLX50T-2FFG665I)
- Preserves a large I/O boundary for interface-heavy embedded systems (vs XC5VLX50T-1FFV665I)
Design Notes
Treat the FFG package as a high-density, fine-pitch FCBGA layout rather than a conventional leaded package. Use the manufacturer ball table and recommended land pattern to assign every power, ground, configuration, clock, and user signal. Place decoupling capacitors close to the associated power balls, maintain uninterrupted return paths beneath high-speed signals, and review via-in-pad, solder-mask, and assembly requirements with the selected PCB process before release.
Separate the 1 V core supply from auxiliary rails and follow the manufacturer's recommended power-supply topology and decoupling values. Estimate worst-case core and auxiliary current from the actual switching activity, then verify the supply with adequate control-loop margin. Account for startup sequencing, configured operating modes, and the possibility that I/O and transceiver demand varies by design. Do not derive a single rail capacity from the 46,080-cell figure alone.
Evaluate junction temperature using the device's actual activity factor, core dissipation, package thermal behavior, PCB copper, airflow, and nearby heat sources. The -1 speed grade alone does not determine dissipation because clocking and I/O utilization can materially change power. Estimated: use the calculated rail power, the applicable thermal resistance from the manufacturer documentation, and the measured ambient temperature to estimate junction rise; repeat for both normal operation and worst-case modes.
Do not approve an alternative solely because its base MPN resembles the target. XC5VLX50T suffix combinations can change speed grade, temperature grade, package ordering, lead finish, or assembly requirements while retaining similar resource counts. Compare the complete ordering table, package drawing, ball map, moisture rating, and production status. For a footprint-qualified substitution, also verify that the existing board supports every power ball, configuration function, and transceiver connection used by the design.
Compliance Information
The FFG ordering code indicates a lead-free package designation, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was included in the cited source content. Confirm the current compliance and qualification documentation for the exact orderable MPN.