XC4VSX25-10FFG668C - 23,040-Cell Virtex-4 SX FPGA | AMD
MPN: XC4VSX25-10FFG668C ✗ End of LifeXC4VSX25-10FFG668C Overview
An FPGA is a semiconductor whose digital functionality is defined after fabrication through a configuration bitstream. Within the broader semiconductor hierarchy, the Virtex-4 SX family combines programmable logic, block RAM, dedicated arithmetic resources, programmable input/output, and high-speed serial and parallel interfaces. Its 1.2 V core and extensive configurable I/O make it suitable for systems where design flexibility, parallel channels, and deterministic hardware operation are more important than minimizing device cost.
Key device characteristics include 23,040 logic cells organized into 2,560 configurable logic blocks, a 1,028 MHz internal frequency specification, and a 668-pin FCBGA package. The -10 speed grade is designed for demanding timing applications, while the C suffix identifies the commercial temperature option. The large ball count supports dense connections to external memory, high-speed transceivers, network interfaces, converters, and custom application-specific circuits without relying on external glue logic.
The Virtex-4 SX device uses advanced CMOS fabrication and configurable logic blocks connected through programmable routing resources. This architecture supports parallel datapaths, deep pipelining, and hardware-level filtering without multiple clock cycles for each operation. Boundary-scan access and device configuration mechanisms should be designed according to the manufacturer’s configuration guidelines because the 668-ball package demands careful escape routing and controlled sequencing of its many supply and signal connections.
Typical applications include telecommunications line-card control, industrial automation, high-speed data acquisition, network-interface aggregation, video-processing backplanes, and laboratory signal-processing systems. Its combination of 2,560 configurable logic blocks and 23,040 logic cells is useful when several parallel channels must operate concurrently or when control, acquisition, and packet-processing functions must be consolidated into one programmable device.
PCB implementation must account for the FCBGA-668 footprint, ball pitch, power-ground distribution, and high-speed routing constraints. Use the manufacturer’s pinout and package information to assign every ball, and preserve the recommended power and ground topology across the device footprint. A four-layer layout may be insufficient for all routing and return-path requirements; stack-up and layer count should be selected before component placement.
This product page combines device specifications, family-level alternatives, application guidance, and engineering design notes to support FPGA selection. It also emphasizes package-level verification and identifies differences among speed, temperature, and suffix options that should be checked before an exact replacement is approved.
Drop-in alternatives for XC4VSX25-10FFG668C — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC4VSX25-10FFG668C (same form factor and footprint) — differing in Mounting Type, Package Type, Speed Grade.
XC4VSX25-12FFG668C
✅ Drop-In📋 Reference alternative (not in catalog)
XC4VSX25-11FFG668I
✅ Drop-In📋 Reference alternative (not in catalog)
XC4VSX25-10FFG668IS2
✅ Drop-In📋 Reference alternative (not in catalog)
XC4VSX25-10FFG668C Maximum Ratings & Electrical Characteristics
| Device Type | Virtex-4 SX field-programmable gate array |
| Logic Cells | 23,040 cells |
| Configurable Logic Blocks | 2,560 blocks |
| Maximum Internal Frequency | 1,028 MHz |
| Speed Grade | -10 grade |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Package Type | FCBGA-668 |
| Package Pin Count | 668 pins |
| Operating Temperature | 0°C to 85°C |
| Temperature Grade | Commercial |
| Mounting Type | Surface-mount FCBGA |
| Lead-Free Status | Pb-free |
XC4VSX25-10FFG668C 668 pins Pin Configuration Guide
Pin configuration for XC4VSX25-10FFG668C (668 pins package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC4VSX25-10FFG668C.
Refer to the datasheet for full pin configuration.
Typical Applications
XC4VSX25-10FFG668C is suitable for 6 applications: Telecommunications Line-Card Control, Industrial Automation and Control, High-Speed Data Acquisition, Digital Signal Processing, Network Interface Aggregation, Video Processing Backplanes.
Telecommunications Line-Card Control
The XC4VSX25-10FFG668C fits telecommunications line-card control because its 23,040 logic cells and 2,560 configurable logic blocks can consolidate packet control, framing, status monitoring, and interface adaptation in one FPGA. The 668-ball FCBGA provides dense access to external memory and high-speed network components, while the 1.2 V core supports a conventional multi-rail FPGA power architecture. Designers should use the manufacturer’s pinout to separate high-speed interface routing from slower control signals and verify all configuration pins before layout release.
Recommended
Industrial Automation and Control
The XC4VSX25-10FFG668C is suitable for industrial automation controllers that require deterministic parallel logic, programmable I/O, and dedicated processing resources. Its 2,560 configurable logic blocks can implement multiple machine-control channels, while 23,040 logic cells provide capacity for protocol handling and supervisory functions. The commercial operating range of 0°C to 85°C matches many indoor controller environments. For installations with wider temperature requirements, evaluate the industrial-qualified same-package alternative and complete environmental derating analysis.
Recommended
High-Speed Data Acquisition
The XC4VSX25-10FFG668C can support parallel data-acquisition systems requiring synchronized sampling, digital filtering, buffering, and data preparation. Its 23,040 logic cells permit multiple parallel datapaths, while the family’s block RAM and dedicated processing resources can reduce repeated external-memory transfers. The 668-ball package offers substantial routing flexibility for ADC interfaces, clocks, and data storage. Exact converter interface rates and timing margins must be established from the selected I/O standards and the manufacturer’s Virtex-4 timing guidance.
Recommended
Digital Signal Processing
The XC4VSX25-10FFG668C is appropriate for digital signal-processing engines that benefit from parallel, programmable hardware rather than sequential execution in a processor. Its 2,560 configurable logic blocks and 23,040 logic cells can host multiple filters, correlators, counters, or fixed-point arithmetic pipelines, while dedicated family resources support demanding implementations. The 1,028 MHz internal frequency figure provides context for timing planning, although actual user performance depends on routing, logic depth, device speed grade, and I/O constraints.
Recommended
Network Interface Aggregation
The XC4VSX25-10FFG668C can aggregate several network-facing data paths when a design benefits from configurable protocol logic, parallel packet processing, and dedicated on-chip storage. Its 23,040 logic cells allow framing, classification, queue-control, and monitoring functions to coexist, reducing reliance on external programmable logic. The 668-ball FCBGA offers enough connectivity for multiple interfaces and memory devices. Layout planning should prioritize short clock routes, controlled impedance, continuous return paths, and proper separation of sensitive configuration signals.
Recommended
Video Processing Backplanes
The XC4VSX25-10FFG668C fits video-processing backplanes that require parallel pixel routing, timing generation, frame buffering, and control functions in a single programmable device. Its 2,560 configurable logic blocks can implement multiple data paths, and the large FCBGA footprint supports connections to frame memory and parallel converters. The commercial 0°C to 85°C range is suitable for many indoor chassis, but airflow and local hot spots still require thermal validation. Use the official package data and pinout for every ball assignment.
Recommended
Recommended Products Summary
Engineering reference data for XC4VSX25-10FFG668C — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC4VSX25-12FFG668C | XC4VSX25-11FFG668I | XC4VSX25-10FFG668IS2 |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 |
| Speed Grade | -10 | -12 | -11 | -10 |
| Temperature Qualification | Commercial, 0°C to 85°C | Commercial | Industrial | Industrial |
Key Differentiators
- Commercial-grade option within the Virtex-4 SX family (vs XC4VSX25-11FFG668I)
- Lower timing grade than the -12 alternative (vs XC4VSX25-12FFG668C)
- Commercial qualification with the same -10 performance grade (vs XC4VSX25-10FFG668IS2)
Design Notes
Use the manufacturer’s official 668-ball FCBGA land pattern and pinout rather than converting the package from a generic BGA library. Route the power, ground, configuration, clock, and high-speed I/O networks according to the Virtex-4 layout guidance. With 668 balls, escape routing and simultaneous switching noise can become dominant constraints, so establish the stack-up, reference-plane arrangement, and layer-transition strategy before placing the device.
Implement the manufacturer’s recommended power rails and decoupling network for the 1.2 V core and associated I/O supplies. Place high-frequency decoupling capacitors close to the relevant device balls, maintain short and wide supply connections, and provide adequate plane connectivity beneath the FPGA. Include voltage sequencing, ramp-rate limits, startup current, and configuration behavior in the power-supply and system-reset design rather than treating the core voltage as a single unregulated rail.
Apply controlled-impedance routing to every external interface and preserve continuous reference planes beneath high-speed traces. Account for ball-pitch escape discontinuities, via stubs, layer transitions, connector and package parasitics, and clock skew in the simulation budget. The 1,028 MHz internal frequency figure is not a guarantee that any particular I/O interface can operate at that rate; usable interface speed depends on the selected I/O standard and timing constraints.
Do not treat a same-ball-count FPGA as a drop-in replacement without checking the complete ordering code and ball-level definitions. Differences among -10, -11, and -12 speed grades, commercial and industrial temperature suffixes, configuration pins, power requirements, and timing limits can prevent an otherwise similar device from working. Before substitution, compare the manufacturer pin tables, configuration instructions, power sequences, and timing analysis for every design variant.
Compliance Information
The component is identified as Pb-free in the product listing. RoHS, REACH, halogen-free, and conflict-minerals status were not established by the available product records.