XC6SLX150-L1FG484I - 147443-Cell Spartan-6 FPGA | AMD
MPN: XC6SLX150-L1FG484I ✗ End of LifeXC6SLX150-L1FG484I Overview
A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. A CPLD generally uses simpler architecture and smaller logic capacity, while an FPGA provides substantially greater parallelism through configurable lookup logic, routing, memories, and dedicated processing resources. The Spartan-6 LX family therefore occupies the FPGA level of the hardware hierarchy and is commonly used where deterministic control logic, high I/O density, or parallel data processing must be consolidated onto one device.
The XC6SLX150-L1FG484I provides 147,443 logic cells and supports 338 I/O in its 484-ball package. Its 45 nm process technology supports integration at a relatively high logic density for a cost-sensitive FPGA platform. The L1 speed designation identifies this ordering variant, while the -1 suffix in the commercial part number also denotes the associated temperature-grade family used by the product line.
Within the device, programmable logic fabric is connected by an interconnect network. Dedicated block RAM allows data buffering and storage without using flip-flop logic, while DSP resources accelerate multiply-accumulate operations used in filtering and digital signal processing. Dedicated input/output blocks provide selectable interfaces, clocking, and differential signaling support according to the device configuration and operating conditions defined by the AMD Spartan-6 documentation.
Typical uses include industrial automation, communications infrastructure, test and measurement equipment, embedded control, video-processing pipelines, and sensor systems. The large 147,443-cell resource count is useful when multiple parallel datapaths, protocol interfaces, and control domains must operate concurrently. The 338-I/O capability also suits boards requiring substantial external connectivity relative to smaller FPGA packages.
PCB design must account for the 484-BBGA footprint, differential-pair routing, power decoupling, clocking, and thermal performance. Use the AMD package files and pinout documentation to assign every ball, preserve the prescribed power and ground connections, and route high-speed interfaces as controlled-impedance nets. Configuration, programming, and JTAG signals should also follow the device reference-design practices.
This page combines device identity, verified electrical and packaging facts, compatible Spartan-6 ordering options, comparison parameters, and practical implementation guidance. It is intended to help engineers identify the correct package and speed-grade variant while planning PCB layout, configuration, thermal management, and migration decisions.
Drop-in alternatives for XC6SLX150-L1FG484I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
XC6SLX150-L1FGG484I
✅ Drop-In📋 Reference alternative (not in catalog)
XQ6SLX150-L1FG484I
✅ Drop-In📋 Reference alternative (not in catalog)
XC6SLX150-2FGG484I
✅ Drop-In📋 Reference alternative (not in catalog)
XC6SLX150-3FGG484I
✅ Drop-InContact for price
View Datasheet →XC6SLX150-2FGG484C
✅ Drop-In📋 Reference alternative (not in catalog)
XC6SLX150-3FGG484C
✅ Drop-In📋 Reference alternative (not in catalog)
XC6SLX150-L1FG484I Maximum Ratings & Electrical Characteristics
| Device Type | Spartan-6 LX Field Programmable Gate Array (FPGA) |
| Logic Cells | 147,443 cells |
| User I/O | 338 I/O |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.0 V |
| Package | 484-BBGA |
| Package Ball Count | 484 balls |
| Device Family | Spartan-6 LX |
| Programmable Logic Type | FPGA |
| Architecture | Configurable logic, routing, block RAM, DSP, and programmable I/O |
| Maximum Performance Grade | L1 speed grade |
| Operating Temperature Grade | Industrial grade |
| Mounting Type | Surface mount |
XC6SLX150-L1FG484I 484 balls Pin Configuration Guide
Pin configuration for XC6SLX150-L1FG484I (484 balls package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC6SLX150-L1FG484I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC6SLX150-L1FG484I is suitable for 6 applications: Industrial Automation and Control, Communications and Network Interface, Test and Measurement Equipment, Digital Signal Processing, Video and Image Processing, Embedded Sensor and IoT Systems.
Industrial Automation and Control
The XC6SLX150-L1FG484I fits industrial controllers that combine machine sequencing, digital I/O, communications, and local signal processing in one FPGA. Its 147,443 logic cells provide substantial parallelism for motion-control state machines, interlocks, diagnostics, and protocol handling, while 338 user I/O support field-bus transceivers, encoders, sensors, and actuators. The 45 nm CMOS implementation and 1.0 V core also place it in the Spartan-6 LX family designed for high-volume embedded systems. During implementation, use the AMD pinout files to assign the 484-BBGA balls and validate every power, ground, clock, and multiplexed configuration connection against the selected design configuration.
Recommended
Communications and Network Interface
The XC6SLX150-L1FG484I can serve as the central programmable logic device in communication equipment requiring parallel packet processing, framing, buffering, and physical-layer interfaces. Its 147,443 logic cells allow multiple data paths and protocol engines to operate concurrently, while the 338-I/O capability accommodates serial transceivers, parallel buses, reference clocks, and management signals. The Spartan-6 LX architecture includes configurable routing, block memory, DSP resources, and programmable I/O that can be combined according to the selected architecture. A practical design should partition high-speed serial links from control logic, apply controlled-impedance routing rules, and verify timing against the target speed grade before fixing the configuration.
Recommended
Test and Measurement Equipment
The XC6SLX150-L1FG484I is appropriate for modular test systems that require flexible sequencing, high-speed acquisition logic, pattern generation, and instrument control in a single device. The 147,443-cell fabric can support parallel channels and timing-sensitive control sequences, while 338 user I/O offer substantial connectivity to converters, memory, trigger logic, and communication controllers. Its 1.0 V core supply and 45 nm CMOS process are consistent with the Spartan-6 LX positioning for cost-sensitive, high-volume embedded systems. Design engineers should use synchronous clocking for high-speed data paths and place configuration, JTAG, clock, and power-distribution connections according to the AMD package guidance.
Recommended
Digital Signal Processing
The XC6SLX150-L1FG484I supports parallel digital signal-processing pipelines that need configurable arithmetic, filtering, and high-speed data movement. Its 147,443 logic cells can implement multiple parallel datapaths, while the Spartan-6 LX DSP resources are suitable for multiply-accumulate stages and the programmable fabric handles control, address generation, and data formatting. The 338-I/O interface provides connections to external converters, memory, and clock sources without requiring a separate large-array processor. In the physical design, constrain all timing-critical paths, place memory interfaces close to their associated logic, and validate the selected speed grade with post-route timing analysis rather than relying only on logic utilization.
Recommended
Video and Image Processing
The XC6SLX150-L1FG484I can implement multi-stage image pipelines, pixel transport, color processing, and interface timing control in programmable logic. Its large 147,443-cell resource pool supports parallel pixels and multiple logical stages, while 338 I/O can interface with capture devices, display controllers, memory, and synchronization signals. Using block memory for line buffers and registers can improve throughput, but storage bandwidth and routing congestion must be evaluated for the selected resolution and frame rate. The 484-BBGA implementation also requires careful escape-routing of high-speed interfaces, continuous power planes, and thermal analysis of the assembled board under sustained image-processing activity.
Recommended
Embedded Sensor and IoT Systems
The XC6SLX150-L1FG484I can consolidate sensor acquisition, edge filtering, protocol conversion, local storage, and system control in compact embedded hardware. Its 338 user I/O provide channels for sensor inputs, digital buses, status indicators, and communications transceivers, while the 147,443-cell fabric supports parallel filtering and decision logic. This integration reduces reliance on multiple fixed-function controllers and permits field updates through a programmable configuration path. Engineers should partition slow sensor inputs from high-speed buses, use clock-enable logic instead of unnecessary global toggling where appropriate, and confirm the power budget and environmental requirements for the selected device ordering code.
Recommended
Recommended Products Summary
Engineering reference data for XC6SLX150-L1FG484I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC6SLX150-L1FGG484I | XQ6SLX150-L1FG484I | XC6SLX150-2FGG484I | XC6SLX150-3FGG484I | XC6SLX150-2FGG484C |
|---|---|---|---|---|---|---|
| Package | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Logic Cells | 147,443 cells | 147,443 cells | 147,443 cells | 147,443 cells | 147,443 cells | 147,443 cells |
| User I/O | 338 I/O | 338 I/O | 338 I/O | 338 I/O | 338 I/O | 338 I/O |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Core Supply Voltage | 1.0 V | 1.0 V | 1.0 V | 1.0 V | 1.0 V | 1.0 V |
| Speed Designation | L1 | L1 | L1 | 2 | 3 | 2 |
| Temperature Designation | Industrial-grade I suffix | Industrial-grade I suffix | I suffix | I suffix | I suffix | C suffix |
| Special Features | Spartan-6 LX programmable logic, block RAM, DSP resources, and programmable I/O | Spartan-6 LX programmable logic, block RAM, DSP resources, and programmable I/O | Spartan-6 LX programmable logic, block RAM, DSP resources, and programmable I/O | Spartan-6 LX programmable logic, block RAM, DSP resources, and programmable I/O | Spartan-6 LX programmable logic, block RAM, DSP resources, and programmable I/O | Spartan-6 LX programmable logic, block RAM, DSP resources, and programmable I/O |
Key Differentiators
- Provides the full 147,443-cell Spartan-6 LX density in a high-connectivity package (vs XC6SLX150-L1FGG484I)
- Combines 338 user I/O with a 45 nm CMOS implementation for integration-heavy embedded systems (vs XQ6SLX150-L1FG484I)
- The L1 speed designation provides a defined timing-performance class without changing device density (vs XC6SLX150-2FGG484I)
- Industrial-grade ordering suits systems designed around the I temperature designation (vs XC6SLX150-2FGG484C)
Design Notes
Use the AMD Spartan-6 package files as the controlling authority for the 484-BBGA footprint and ball map. Preserve all exposed thermal, supply, and ground connections exactly as specified, and place local high-frequency decoupling close to the relevant device balls. A 484-BBGA escape-routing strategy should be developed before placement so that configuration, clock, JTAG, and high-speed differential pairs can reach the device without violating the package’s routing requirements.
Separate high-speed differential and parallel data paths from slower control signals, and use continuous reference planes where the signal-integrity design permits. Define clock regions and route memory interfaces with matched timing constraints. Differential-pair geometry, length compensation, and via transitions should follow the selected I/O standard’s requirements. Re-run post-route timing at the actual target speed grade rather than assuming that the L1 variant has the same timing margin as grade 2 or grade 3 alternatives.
Evaluate thermal performance from estimated FPGA power plus adjacent board heat, with particular attention to the 484-BBGA’s dense ball field and possible center thermal connection. Use the AMD power estimator for the actual resource utilization, I/O standards, clocking, and switching activity, then validate with board-level measurements. Keep high-current supply distribution and heat-spreading copper continuous beneath the device, and avoid concentrating adjacent heat sources where the FPGA must operate at elevated ambient temperature.
Do not treat every 484-ball Spartan-6 ordering code as an automatic drop-in replacement. Verify the package drawing, ball assignment, speed designation, temperature suffix, configuration method, supported I/O standards, and electrical limits. In particular, the XQ6SLX150 ordering family, higher speed grades, and C temperature variants require deliberate qualification even when the ball count and logic density match. Document bitstream compatibility and perform a formal pin-by-pin review before releasing a replacement to production.
Compliance Information
The industrial I suffix identifies the ordering temperature grade, but no formal environmental-compliance declarations were identified for this exact MPN.