XC7Z030-3SBG485E - 1GHz Zynq-7000 SoC FPGA | AMD
MPN: XC7Z030-3SBG485E ✓ ActiveXC7Z030-3SBG485E Overview
A Zynq-7000 SoC belongs to the FPGA and CPLD category while combining a processor-based subsystem with programmable logic. The processing system executes software through dual ARM Cortex-A9 cores, while the FPGA fabric implements parallel datapaths, custom interfaces, fixed-function accelerators, and timing-critical logic. This heterogeneous architecture can reduce external component count compared with separate processor and FPGA designs, although software, power, clocking, and thermal validation remain essential.
Key features include 125,000 FPGA logic cells, a 1 GHz Cortex-A9 performance designation, dual-core ARM Cortex-A9 MPCore integration, CoreSight debug capability, and a compact 484-ball FCBGA package. The processor subsystem and programmable logic share access to memory and high-speed input/output resources, allowing designs to partition functions between sequential software and parallel hardware according to workload, latency, power, and real-time requirements.
The -3 designator identifies the 1 GHz speed grade, while SBG485 identifies the 484-ball FCBGA configuration and E identifies the specified device grade. The 19 mm by 19 mm package has a 0.8 mm ball pitch and requires a dense, multilayer PCB with careful power delivery, decoupling, ball-by-ball escape routing, and thermal design. Designers should use the AMD package pinout files and Zynq-7000 technical documentation when assigning every power, ground, clock, configuration, processor, and programmable-logic ball.
Typical applications include industrial control, robotics, machine vision, network equipment, sensor processing, test and measurement, communications infrastructure, and embedded systems that benefit from combining Linux or real-time software with FPGA acceleration. The dual-core processor handles control-plane software, operating systems, communications, and configuration tasks, while programmable logic can implement high-throughput data paths, custom serial interfaces, video pipelines, or hardware accelerators.
A primary design consideration is power-domain sequencing. The processing system, programmable logic, memory interfaces, transceivers, and I/O supplies have distinct requirements, so rails should be enabled in the manufacturer-recommended order. Decoupling, independent voltage rails, clocking, JTAG, device configuration, and thermal management should be implemented according to the AMD Zynq-7000 design guidance before the PCB is released.
This page combines the exact XC7Z030-3SBG485E identity, package information, documented alternatives, application guidance, and engineering-focused design notes. It also distinguishes verified same-package options from variants that use different packages, helping engineers avoid treating merely similar Zynq devices as true drop-in replacements.
Drop-in alternatives for XC7Z030-3SBG485E — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC7Z030-3SBG485E (same form factor and footprint) — differing in Logic Cells, Mounting Type, Package, Processor Core.
XC7Z030-2SBG485I
✅ Drop-InContact for price
View Datasheet →XC7Z030-3SBG485E Maximum Ratings & Electrical Characteristics
| Device Type | Zynq-7000 all-programmable system-on-chip |
| Programmable Logic | Kintex-7 FPGA logic |
| Logic Cells | 125,000 cells |
| Processor Core | Dual-core ARM Cortex-A9 MPCore |
| Processor Clock | 1 GHz |
| Debug Support | CoreSight |
| Package Type | 484-ball FCBGA |
| Package Dimensions | 19 mm x 19 mm |
| Ball Pitch | 0.8 mm |
| Ball Count | 484 balls |
| Mounting Type | Surface mount |
XC7Z030-3SBG485E 19 mm x 19 mm Pin Configuration Guide
Pin configuration for XC7Z030-3SBG485E (19 mm x 19 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC7Z030-3SBG485E.
Refer to the datasheet for full pin configuration.
Typical Applications
XC7Z030-3SBG485E is suitable for 6 applications: Industrial Machine Vision, Robotics Control, Industrial Communications Gateway, Test and Measurement, Sensor Processing and IoT Edge, Aerospace and Defense Control.
Industrial Machine Vision
The XC7Z030-3SBG485E fits machine-vision systems where camera data must be acquired, filtered, and evaluated without excessive processor overhead. The dual ARM Cortex-A9 cores can run camera control, communication, diagnostics, and higher-level application software, while the 125,000-cell Kintex-7 fabric can accelerate pixel processing, thresholding, feature extraction, or trigger logic. The 1 GHz processor grade supports responsive supervisory control, while deterministic I/O and timing behavior remain the responsibility of the programmable logic. A practical design should partition frame buffers and time-critical paths carefully, then validate synchronization across the processor, DMA paths, camera interfaces, and external memory.
Recommended
Robotics Control
The XC7Z030-3SBG485E is appropriate for robotic controllers that coordinate motion control, sensor fusion, communications, and safety monitoring. Its dual Cortex-A9 cores can run real-time operating systems, path-planning tasks, and external command protocols, while the FPGA fabric handles encoder inputs, actuator timing, or sensor data acquisition. The combination reduces the need to route high-bandwidth parallel data through the processor and permits hardware-specific timing to remain independent of software scheduling. For mobile or industrial robots, the design should define processor-to-FPGA interfaces, watchdog behavior, emergency-stop handling, and power rails before PCB implementation.
Recommended
Industrial Communications Gateway
The XC7Z030-3SBG485E can serve as the processing core of an industrial gateway requiring both network software and hardware-assisted protocol handling. The dual Cortex-A9 processors support operating systems, management agents, routing logic, and cybersecurity functions, while the 125,000 FPGA cells can implement custom Ethernet streams, serial interfaces, packet filters, or time-critical data acquisition. The 1 GHz processor operating point is useful when the gateway must perform protocol termination and local control concurrently with FPGA-side traffic processing. Deployment should account for interface timing, memory bandwidth, thermal conditions, and deterministic fault containment across the software and programmable-logic domains.
Recommended
Test and Measurement
The XC7Z030-3SBG485E is well suited to modular test and measurement instruments that combine sequential control with flexible acquisition hardware. The ARM Cortex-A9 cores can execute instrument-control software, calibration routines, and user interfaces, while the Kintex-7 logic fabric implements counters, timing engines, digital triggers, waveform processing, or specialized interfaces. Its 125,000 logic cells allow a single SoC to consolidate functions that would otherwise require separate programmable logic. Signal integrity still depends on the selected I/O standards, external memory, clocking architecture, analog front end, and PCB stack-up, so the programmable device should be treated as one element in the complete measurement chain.
Recommended
Sensor Processing and IoT Edge
The XC7Z030-3SBG485E can act as an edge-processing node for connected sensors that generate continuous or bursty data streams. The dual Cortex-A9 cores can run device management, analytics, and network protocols, while the programmable logic performs filtering, feature extraction, framing, or sensor fusion in parallel. This division of labor helps maintain responsiveness when workloads exceed the practical throughput of sequential software. For IoT and smart-sensor products, designers should evaluate standby and active power, RAM requirements, boot behavior, security requirements, and update mechanisms. The exact interface set and operating-temperature requirements must be selected and validated for the intended product environment.
Recommended
Aerospace and Defense Control
The XC7Z030-3SBG485E can support embedded control, monitoring, and data-processing functions where programmable logic and processors must coexist in one system. The Cortex-A9 subsystem runs supervisory software and control sequences, while the FPGA fabric implements deterministic interfaces, redundant data paths, or specialized monitoring logic. The 1 GHz grade and 125,000 logic cells provide a useful balance for embedded avionics and defense systems with substantial data-processing requirements. Actual program eligibility cannot be inferred from the commercial ordering code; designers must confirm the exact device grade, radiation, temperature, documentation, and qualification requirements with AMD before using the part in a controlled application.
Recommended
Engineering reference data for XC7Z030-3SBG485E — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC7Z030-2SBG485I |
|---|---|---|
| Package | 484-FCBGA (19x19) | 484-FCBGA (19x19) |
| Brand | AMD | AMD |
| Processor Speed | 1 GHz | 800 MHz |
| Processor Core | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Logic Cells | 125,000 cells | 125,000 cells |
| Programmable Logic | Kintex-7 FPGA logic | Kintex-7 FPGA logic |
| Device Grade Suffix | E | I |
| Ball Pitch | 0.8 mm | 0.8 mm |
Key Differentiators
- Higher processor speed grade (vs XC7Z030-2SBG485I)
- Exact package footprint preservation (vs XC7Z030-2SBG485I)
- Equivalent programmable logic resource class (vs XC7Z030-2SBG485I)
Design Notes
Implement the processing-system, programmable-logic, memory, I/O, and auxiliary supply rails as separately controlled domains, following AMD's recommended sequencing. Place high-frequency ceramic decoupling close to the associated power balls and provide adequate bulk capacitance for processor and FPGA transients. Validate startup, shutdown, current limits, and rail tolerances under both idle and maximum logical activity rather than relying on a single nominal power figure.
The 484-ball FCBGA uses a 0.8 mm ball pitch, so escape routing requires a deliberate PCB stack-up and via strategy. Match the land pattern to the AMD SBG485 package drawing, account for via-in-pad requirements, and route clocks as short, controlled-impedance paths. Separate sensitive clock and configuration inputs from high-current switching paths, and review the complete BGA escape plan for assembly yield before fabrication.
Estimate heat dissipation separately for the processor subsystem and programmable-logic fabric because their loading can vary independently. Use copper planes or spreading paths beneath the device where permitted by the package design, and include thermal vias and an enclosure heat path in the mechanical design. Validate the hottest expected operating condition rather than relying only on an ambient-temperature calculation.
Do not substitute an FFG676, FBG676, or FBG484 XC7Z030 solely because it has the same family name; those packages have different dimensions, ball counts, and footprints. Even SBG485 devices with different speed or grade suffixes require review of timing, temperature, power, and qualification constraints. Use AMD's package pinout files to distinguish connected balls from no-connect positions on smaller devices.
Compliance Information
Compliance attributes were not stated in the identified manufacturer or distributor records and must be confirmed for the exact ordering code.