AMD

XC7Z030-3SBG485E - 1GHz Zynq-7000 SoC FPGA | AMD

N.º de pieza: XC7Z030-3SBG485E ✓ Activo
484-ball FCBGA Package 1 GHz Speed
MOQ: 1 |

XC7Z030-3SBG485E Descripción general

The AMD XC7Z030-3SBG485E is a Zynq-7000 all-programmable system-on-chip integrating a dual-core ARM Cortex-A9 MPCore processing system with Kintex-7 FPGA logic, CoreSight debug support, 125,000 logic cells, and a 1 GHz processor operating point in a 484-ball FCBGA package measuring 19 mm by 19 mm. It combines hard real-time processing-system resources with programmable logic for protocol bridging, hardware acceleration, image processing, control, and high-performance embedded applications.

A Zynq-7000 SoC belongs to the FPGA and CPLD category while combining a processor-based subsystem with programmable logic. The processing system executes software through dual ARM Cortex-A9 cores, while the FPGA fabric implements parallel datapaths, custom interfaces, fixed-function accelerators, and timing-critical logic. This heterogeneous architecture can reduce external component count compared with separate processor and FPGA designs, although software, power, clocking, and thermal validation remain essential.

Key features include 125,000 FPGA logic cells, a 1 GHz Cortex-A9 performance designation, dual-core ARM Cortex-A9 MPCore integration, CoreSight debug capability, and a compact 484-ball FCBGA package. The processor subsystem and programmable logic share access to memory and high-speed input/output resources, allowing designs to partition functions between sequential software and parallel hardware according to workload, latency, power, and real-time requirements.

The -3 designator identifies the 1 GHz speed grade, while SBG485 identifies the 484-ball FCBGA configuration and E identifies the specified device grade. The 19 mm by 19 mm package has a 0.8 mm ball pitch and requires a dense, multilayer PCB with careful power delivery, decoupling, ball-by-ball escape routing, and thermal design. Designers should use the AMD package pinout files and Zynq-7000 technical documentation when assigning every power, ground, clock, configuration, processor, and programmable-logic ball.

Typical applications include industrial control, robotics, machine vision, network equipment, sensor processing, test and measurement, communications infrastructure, and embedded systems that benefit from combining Linux or real-time software with FPGA acceleration. The dual-core processor handles control-plane software, operating systems, communications, and configuration tasks, while programmable logic can implement high-throughput data paths, custom serial interfaces, video pipelines, or hardware accelerators.

A primary design consideration is power-domain sequencing. The processing system, programmable logic, memory interfaces, transceivers, and I/O supplies have distinct requirements, so rails should be enabled in the manufacturer-recommended order. Decoupling, independent voltage rails, clocking, JTAG, device configuration, and thermal management should be implemented according to the AMD Zynq-7000 design guidance before the PCB is released.

This page combines the exact XC7Z030-3SBG485E identity, package information, documented alternatives, application guidance, and engineering-focused design notes. It also distinguishes verified same-package options from variants that use different packages, helping engineers avoid treating merely similar Zynq devices as true drop-in replacements.

Alternativas directas para XC7Z030-3SBG485E — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con XC7Z030-3SBG485E (mismo factor de forma y huella) — difiere en Logic Cells, Mounting Type, Package, Processor Core.

AMD
Logic Cells: 125K logic cells
Mounting Type: Surface-mount ball grid array
Package: 484-FCBGA
Comparar con XC7Z030-3SBG485E →
AMD
Logic Cells: 125,000
Package: 484-FCBGA (19x19 mm)
Processor Core: Dual ARM Cortex-A9 MPCore with CoreSight
Comparar con XC7Z030-3SBG485E →

XC7Z030-2SBG485I

✅ Sustitución directa
AMD
📦 484-FCBGA (19x19)
Zynq-7000 · Dual ARM Cortex-A9 MPCore with CoreSight · 800 MHz · 125,000 · 28nm · 484-FCBGA (19x19 mm) · -40°C to +100°C · 12-bit

Consulte el precio

Ver hoja de datos →

XC7Z030-3SBG485E Valores máximos y características eléctricas

Device Type Zynq-7000 all-programmable system-on-chip
Programmable Logic Kintex-7 FPGA logic
Logic Cells 125,000 cells
Processor Core Dual-core ARM Cortex-A9 MPCore
Processor Clock 1 GHz
Debug Support CoreSight
Package Type 484-ball FCBGA
Package Dimensions 19 mm x 19 mm
Ball Pitch 0.8 mm
Ball Count 484 balls
Tipo de montaje Surface mount

Guía de configuración de pines de XC7Z030-3SBG485E 19 mm x 19 mm

Configuración de pines para XC7Z030-3SBG485E (encapsulado 19 mm x 19 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 19 mm x 19 mm para XC7Z030-3SBG485E

No hay datos detallados de patillaje disponibles para XC7Z030-3SBG485E.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XC7Z030-3SBG485E es adecuado para 6 aplicacións: Industrial Machine Vision, Robotics Control, Industrial Communications Gateway, Test and Measurement, Sensor Processing and IoT Edge, Aerospace and Defense Control.

🏭

Industrial Machine Vision

The XC7Z030-3SBG485E fits machine-vision systems where camera data must be acquired, filtered, and evaluated without excessive processor overhead. The dual ARM Cortex-A9 cores can run camera control, communication, diagnostics, and higher-level application software, while the 125,000-cell Kintex-7 fabric can accelerate pixel processing, thresholding, feature extraction, or trigger logic. The 1 GHz processor grade supports responsive supervisory control, while deterministic I/O and timing behavior remain the responsibility of the programmable logic. A practical design should partition frame buffers and time-critical paths carefully, then validate synchronization across the processor, DMA paths, camera interfaces, and external memory.

🏭

Robotics Control

The XC7Z030-3SBG485E is appropriate for robotic controllers that coordinate motion control, sensor fusion, communications, and safety monitoring. Its dual Cortex-A9 cores can run real-time operating systems, path-planning tasks, and external command protocols, while the FPGA fabric handles encoder inputs, actuator timing, or sensor data acquisition. The combination reduces the need to route high-bandwidth parallel data through the processor and permits hardware-specific timing to remain independent of software scheduling. For mobile or industrial robots, the design should define processor-to-FPGA interfaces, watchdog behavior, emergency-stop handling, and power rails before PCB implementation.

🌐

Industrial Communications Gateway

The XC7Z030-3SBG485E can serve as the processing core of an industrial gateway requiring both network software and hardware-assisted protocol handling. The dual Cortex-A9 processors support operating systems, management agents, routing logic, and cybersecurity functions, while the 125,000 FPGA cells can implement custom Ethernet streams, serial interfaces, packet filters, or time-critical data acquisition. The 1 GHz processor operating point is useful when the gateway must perform protocol termination and local control concurrently with FPGA-side traffic processing. Deployment should account for interface timing, memory bandwidth, thermal conditions, and deterministic fault containment across the software and programmable-logic domains.

🔧

Test and Measurement

The XC7Z030-3SBG485E is well suited to modular test and measurement instruments that combine sequential control with flexible acquisition hardware. The ARM Cortex-A9 cores can execute instrument-control software, calibration routines, and user interfaces, while the Kintex-7 logic fabric implements counters, timing engines, digital triggers, waveform processing, or specialized interfaces. Its 125,000 logic cells allow a single SoC to consolidate functions that would otherwise require separate programmable logic. Signal integrity still depends on the selected I/O standards, external memory, clocking architecture, analog front end, and PCB stack-up, so the programmable device should be treated as one element in the complete measurement chain.

🧩

Sensor Processing and IoT Edge

The XC7Z030-3SBG485E can act as an edge-processing node for connected sensors that generate continuous or bursty data streams. The dual Cortex-A9 cores can run device management, analytics, and network protocols, while the programmable logic performs filtering, feature extraction, framing, or sensor fusion in parallel. This division of labor helps maintain responsiveness when workloads exceed the practical throughput of sequential software. For IoT and smart-sensor products, designers should evaluate standby and active power, RAM requirements, boot behavior, security requirements, and update mechanisms. The exact interface set and operating-temperature requirements must be selected and validated for the intended product environment.

✈️

Aerospace and Defense Control

The XC7Z030-3SBG485E can support embedded control, monitoring, and data-processing functions where programmable logic and processors must coexist in one system. The Cortex-A9 subsystem runs supervisory software and control sequences, while the FPGA fabric implements deterministic interfaces, redundant data paths, or specialized monitoring logic. The 1 GHz grade and 125,000 logic cells provide a useful balance for embedded avionics and defense systems with substantial data-processing requirements. Actual program eligibility cannot be inferred from the commercial ordering code; designers must confirm the exact device grade, radiation, temperature, documentation, and qualification requirements with AMD before using the part in a controlled application.

What is the AMD XC7Z030-3SBG485E?
The AMD XC7Z030-3SBG485E is a Zynq-7000 all-programmable SoC combining a dual-core ARM Cortex-A9 MPCore processing system, Kintex-7 FPGA logic, and CoreSight debug capability. According to the AMD Zynq-7000 device description, it provides 125,000 logic cells, a 1 GHz processor operating point, and a 484-ball FCBGA package measuring 19 mm by 19 mm.
What is the difference between the processor and FPGA in XC7Z030-3SBG485E?
The XC7Z030-3SBG485E separates sequential and parallel processing within one SoC. Its dual ARM Cortex-A9 cores run operating systems and application software, while the 125,000-cell Kintex-7 FPGA fabric implements parallel datapaths, fixed-function accelerators, and custom interfaces. The AMD Zynq-7000 documentation identifies this combination as the defining all-programmable architecture.
Where can I download the XC7Z030-3SBG485E datasheet PDF?
The official XC7Z030 family datasheet is available from AMD at the DS191 document page, which covers XC7Z030, XC7Z035, XC7Z045, and XC7Z100 devices. Use that document for electrical characteristics, device configurations, and ordering information, and use AMD's separate Zynq-7000 package pinout resource for package-specific ball assignments.
Where can I find the XC7Z030-3SBG485E pinout and package drawing?
The XC7Z030-3SBG485E pinout is maintained through AMD's Zynq 7000 package device pinout files and the XC7Z30-SBG485 package placement diagram. These resources identify the 484-ball FCBGA assignments and physical ball locations. Use the exact SBG485 package drawing rather than a similarly named FFG676 or FBG676 device drawing.
What is the XC7Z030-3SBG485E package and ball pitch?
The XC7Z030-3SBG485E uses a 484-ball FCBGA package measuring 19 mm by 19 mm, with a 0.8 mm ball pitch according to its package placement information. The SBG485 suffix identifies this package. Its fine pitch and large ball count require multilayer PCB construction and careful escape-routing analysis.
What can replace the XC7Z030-3SBG485E?
The closest documented same-package option is the XC7Z030-2SBG485I, which also uses a 484-ball FCBGA but runs at an 800 MHz processor speed grade and carries a different grade suffix. It is not an unconditional drop-in replacement because speed and device-grade requirements must be checked against the original design; no five-part drop-in set is documented.
Can XC7Z030-2SBG485I replace XC7Z030-3SBG485E?
The XC7Z030-2SBG485I is a package-compatible candidate, not a universally equivalent substitute. Its 484-ball FCBGA package matches the target package, but its processor speed is listed as 800 MHz versus 1 GHz for the XC7Z030-3SBG485E. Validate timing, temperature grade, power, and system-performance requirements before substitution.
Is there a cross-brand drop-in equivalent for XC7Z030-3SBG485E?
No cross-brand drop-in equivalent is documented for the XC7Z030-3SBG485E. The device combines a proprietary ARM Cortex-A9 processing system, CoreSight resources, Kintex-7 programmable logic, and a proprietary 484-ball BGA interface, so package or processor similarity alone cannot establish drop-in compatibility. Use AMD for a validated same-family migration.
When should I choose XC7Z030-3SBG485E over a lower-speed XC7Z030 device?
Choose the XC7Z030-3SBG485E when a design benefits from the 1 GHz processor speed grade and its associated processing performance, while still requiring the 484-ball SBG485 footprint. Select the lower-speed XC7Z030-2SBG485I only when the lower processor rate and changed grade are acceptable and have been validated against the complete system timing and power budget.
Is XC7Z030-3SBG485E suitable for industrial robotics and machine vision?
Yes, the XC7Z030-3SBG485E is suitable for industrial robotics and machine-vision architectures that combine real-time software with parallel hardware acceleration. Its dual Cortex-A9 cores can run control and communication functions, while the 125,000-cell FPGA fabric can process image data, sensors, or proprietary interfaces concurrently. Final suitability depends on the required temperature grade, I/O, memory, and lifecycle targets.
How much power does the XC7Z030-3SBG485E consume?
The XC7Z030-3SBG485E power depends on processor activity, programmable-logic utilization, I/O activity, voltage, temperature, and enabled power domains, so a single operating-current value would be misleading. Consult the AMD DS191 electrical-characteristics section and estimate each rail under the intended workload. Power-domain sequencing is also essential because the processing system and programmable logic can operate independently.
What PCB design practices are required for XC7Z030-3SBG485E?
The XC7Z030-3SBG485E requires a dense multilayer PCB with short power and ground connections, local decoupling, controlled clocking, and careful BGA escape routing. Because the package contains 484 balls on a 0.8 mm pitch, assembly yield and inspectability depend heavily on laser-drill microvias, pad design, solder-mask control, and thermal management. Follow the AMD package and design guidance before release.
Is the XC7Z030-3SBG485E currently available for quotation?
Current commercial availability should be confirmed through XAIPART's Request a Quote form on this page, which handles current supply, pricing, and lead time for the exact MPN. The XC7Z030-3SBG485E is listed in active manufacturer and distributor channels, but stock and delivery timing can change. Request the required quantity and packaging details with the inquiry.
What is the lead time for XC7Z030-3SBG485E?
The current lead time for the XC7Z030-3SBG485E must be requested through XAIPART's Request a Quote form on this page. Lead time depends on factory availability, allocation, order volume, and the required delivery schedule. Supply-chain conditions for programmable logic can change quickly, so procurement should request a commitment against the specific production quantity.
What are the key specifications of XC7Z030-3SBG485E that engineers should know?
The XC7Z030-3SBG485E integrates a dual-core ARM Cortex-A9 MPCore processing system, 125,000 Kintex-7 FPGA logic cells, CoreSight debug support, and a 1 GHz processor operating point. It is packaged in a 484-ball FCBGA measuring 19 mm by 19 mm with a 0.8 mm ball pitch. These figures define its principal processing, logic, and packaging characteristics.
Can XC7Z030-3SBG485E be used for test and measurement equipment?
Yes, the XC7Z030-3SBG485E can support test and measurement equipment that benefits from flexible FPGA logic alongside embedded software. Processor cores can manage control software, communications, and configuration, while the FPGA fabric can implement acquisition logic, timing, signal processing, and custom interfaces. The board must also provide the required memory, clocks, I/O expansion, cooling, and synchronization architecture.

Datos de referencia de ingeniería para XC7Z030-3SBG485E — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the XC7Z030-3SBG485E when a design requires the 1 GHz Zynq-7000 processor grade, 125,000 FPGA logic cells, and the 484-ball SBG485 footprint. It is appropriate for embedded control, industrial communication, machine vision, sensor processing, and test systems that divide sequential software tasks between the dual Cortex-A9 cores and parallel work in programmable logic. The XC7Z030-2SBG485I preserves the same package and principal architecture, making it the documented migration path when the lower 800 MHz processor rate and changed grade are acceptable. It should not be selected automatically for timing-critical or temperature-constrained designs without a full review. Zynq devices in FFG676, FBG676, and FBG484 packages are not drop-in choices because their physical dimensions, ball counts, and footprints differ.

Comparación con alternativas

Parámetro Este producto XC7Z030-2SBG485I
Package 484-FCBGA (19x19) 484-FCBGA (19x19)
Brand AMD AMD
Processor Speed 1 GHz 800 MHz
Processor Core Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore
Logic Cells 125,000 cells 125,000 cells
Programmable Logic Kintex-7 FPGA logic Kintex-7 FPGA logic
Device Grade Suffix E I
Ball Pitch 0.8 mm 0.8 mm

Diferenciadores clave

  • Higher processor speed grade (frente a XC7Z030-2SBG485I)
  • Exact package footprint preservation (frente a XC7Z030-2SBG485I)
  • Equivalent programmable logic resource class (frente a XC7Z030-2SBG485I)

Notas de diseño

Implement the processing-system, programmable-logic, memory, I/O, and auxiliary supply rails as separately controlled domains, following AMD's recommended sequencing. Place high-frequency ceramic decoupling close to the associated power balls and provide adequate bulk capacitance for processor and FPGA transients. Validate startup, shutdown, current limits, and rail tolerances under both idle and maximum logical activity rather than relying on a single nominal power figure.

The 484-ball FCBGA uses a 0.8 mm ball pitch, so escape routing requires a deliberate PCB stack-up and via strategy. Match the land pattern to the AMD SBG485 package drawing, account for via-in-pad requirements, and route clocks as short, controlled-impedance paths. Separate sensitive clock and configuration inputs from high-current switching paths, and review the complete BGA escape plan for assembly yield before fabrication.

Estimate heat dissipation separately for the processor subsystem and programmable-logic fabric because their loading can vary independently. Use copper planes or spreading paths beneath the device where permitted by the package design, and include thermal vias and an enclosure heat path in the mechanical design. Validate the hottest expected operating condition rather than relying only on an ambient-temperature calculation.

Do not substitute an FFG676, FBG676, or FBG484 XC7Z030 solely because it has the same family name; those packages have different dimensions, ball counts, and footprints. Even SBG485 devices with different speed or grade suffixes require review of timing, temperature, power, and qualification constraints. Use AMD's package pinout files to distinguish connected balls from no-connect positions on smaller devices.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance attributes were not stated in the identified manufacturer or distributor records and must be confirmed for the exact ordering code.

Datos verificados el: 2026-11-14 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

XC7Z030-3SBG485E datasheet XC7Z030-3SBG485E pinout XC7Z030-3SBG485E datasheet pdf XC7Z030-3SBG485E equivalent XC7Z030-3SBG485E replacement XC7Z030-3SBG485E vs XC7Z030-2SBG485I AMD XC7Z030-3SBG485E XC7Z030 3sbg485e equivalent XC7Z030 3sbg485e price XC7Z030 3sbg485e stock XC7Z030 1sbg485i XC7Z030 2sbg485i XC7Z030 3ffg676e 484 FCBGA Zynq-7000 XC7Z030 dual Cortex-A9 FPGA

Componentes & términos relacionados

AMD XC7Z030-3SBG485E XC7Z030-2SBG485I Zynq-7000 all-programmable SoC FPGA CPLD Kintex-7 FPGA ARM Cortex-A9 MPCore CoreSight 125,000 logic cells 1 GHz processor 484-FCBGA 19 mm by 19 mm package 0.8 mm ball pitch system-on-chip programmable logic processing system industrial control machine vision test and measurement sensor processing industrial communications hardware acceleration
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ