XC9572XL-7VQ44I - 72-Macro-Cell 3.3V CPLD | AMD
MPN: XC9572XL-7VQ44I ✓ ActiveXC9572XL-7VQ44I Overview
A complex programmable logic device is a programmable digital logic category combining reconfigurable logic fabric, programmable interconnect, and user-defined input/output blocks. In the product hierarchy, a CPLD is a programmable-logic IC and sits alongside FPGA & CPLD devices. The XC9572XL family targets low-voltage communications, computing, industrial control, and embedded interface applications where deterministic logic, modest gate capacity, and nonvolatile configuration are useful.
Key features include 72 macro cells, four 54V18 function blocks, 1,600 usable gates, and a family propagation delay of 5 ns. The specific -7 suffix identifies a 7.5 ns device speed grade according to the distributor specification, while the I suffix identifies the industrial-temperature ordering option. Its 3.3 V operating supply supports modern low-voltage logic systems, and the 44-pin VQFP package provides a compact surface-mount footprint.
Internally, the XC9572XL architecture divides logic into four 54V18 function blocks. Their outputs connect through dedicated interconnect to programmable I/O blocks, allowing board-level logic to be consolidated into a single configurable device. This architecture is useful for bus decoding, address and command generation, protocol bridging, state machines, and fixed-function glue logic without occupying a large FPGA.
Typical uses include communications line-card control, embedded processor peripherals, industrial interface modules, test and measurement logic, data-acquisition control, and general-purpose board support logic. The 1,600-gate device is particularly appropriate when logic requirements remain modest and deterministic implementation is preferable to a soft processor or a much larger FPGA.
For PCB implementation, use the DS057 pinout and package information, preserve the manufacturer-specified decoupling and configuration requirements, and verify every signal against the 3.3 V domain. Programming support must also be checked against the installed AMD/Xilinx design environment and programmer before committing to an industrial design.
This page combines manufacturer architecture details, package and ordering information, practical CPLD design guidance, and a restrained replacement assessment. It distinguishes true same-footprint family options from broader functional alternatives so engineers can focus first on pin-level and timing compatibility.
Drop-in alternatives for XC9572XL-7VQ44I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
XC9572XL-7VQG44I
✅ Drop-In📋 Reference alternative (not in catalog)
XC9572XL-10VQG44I
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC9572XL-10VQG44C
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC9572XL-7VQ44I Maximum Ratings & Electrical Characteristics
| Device Type | Complex programmable logic device (CPLD) |
| Supply Voltage | 3.3 V |
| Macro Cells | 72 macro cells |
| Function Blocks | 4 function blocks |
| Function Block Architecture | 54V18 |
| Usable Logic Gates | 1,600 gates |
| Family Propagation Delay | 5 ns |
| Speed Grade | 7 ns grade; 7.5 ns specified for XC9572XL-7 |
| Maximum Frequency | 125 MHz |
| Process Technology | 0.35 µm CMOS |
| Package | 44-pin VQFP |
| Pin Count | 44 pins |
| Mounting Type | Surface mount |
| Temperature Grade | Industrial grade |
XC9572XL-7VQ44I 44-pin vqfp Pin Configuration Guide
Pin configuration for XC9572XL-7VQ44I (44-pin vqfp package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC9572XL-7VQ44I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC9572XL-7VQ44I is suitable for 6 applications: Communications Line-Card Control, Embedded Processor Peripheral Control, Industrial Interface and Bus Control, Test and Measurement Control, Data-Acquisition Control, Fixed-Function Glue Logic.
Communications Line-Card Control
The XC9572XL-7VQ44I suits compact communications line-card logic because its 72 macro cells and 1,600 usable gates can implement control, status, and interface functions without a large FPGA. Its 3.3 V supply matches modern single-board logic, while the -7 speed grade provides a 7.5 ns device timing option for short control paths. A typical design would use the CPLD for command decoding, interrupt routing, reset sequencing, and programmable backplane handling. The 44-pin VQFP also limits board area, although exact I/O assignments and timing must be taken from DS057.
Recommended
Embedded Processor Peripheral Control
The XC9572XL-7VQ44I can consolidate deterministic peripherals around an embedded processor, including address decoding, interrupt control, watchdog logic, and peripheral multiplexing. Its 72 macro cells provide enough capacity for moderate control logic, while the -7 grade offers lower propagation delay than the 10 ns ordering option. The device does not replace a processor or general-purpose memory; instead, it handles fixed and board-specific functions that benefit from deterministic hardware response. Configuration compatibility and pin-level peripheral signals should be validated against the system timing budget.
Recommended
Industrial Interface and Bus Control
For industrial interface modules, the XC9572XL-7VQ44I can implement bus arbitration, command translation, handshake sequencing, fault logging, and I/O control in a compact 44-pin VQFP. Its 72 macro cells and four 54V18 function blocks are appropriate for fixed protocols and moderately complex state machines that need reliable nonvolatile configuration. The 3.3 V device can support modern digital interfaces, but external level translation and electrical protection remain system-level requirements. Verify every interface voltage, rise-time requirement, and timing margin against the official DS057 tables.
Recommended
Test and Measurement Control
The XC9572XL-7VQ44I is useful for instrument-control logic that coordinates test sequences, trigger routing, status flags, and front-panel interfaces. The 1,600 usable gates can implement a compact deterministic controller without occupying an FPGA designed for high-speed parallel processing or large memory fabrics. Its 3.3 V operation and 44-pin VQFP simplify integration into moderately dense measurement boards. For timing-sensitive trigger paths, analyze the complete external setup-and-hold budget and use the -7 grade when the slower -10 variant does not provide sufficient margin.
Recommended
Data-Acquisition Control
The XC9572XL-7VQ44I can coordinate data-acquisition subsystems by handling channel sequencing, control-word generation, trigger routing, and status monitoring. Its 72 macro cells are suitable for a compact acquisition controller rather than high-channel-count processing. The 3.3 V supply aligns with many converter and interface subsystems, while the 44-pin VQFP supports space-constrained instrumentation. Designers should isolate high-current analog and switching sections, respect input/output timing requirements, and verify that the selected configuration file meets all acquisition timing constraints.
Recommended
Fixed-Function Glue Logic
The XC9572XL-7VQ44I is effective for board-specific glue logic such as power sequencing, interrupt combination, reset generation, bus muxing, and legacy interface bridging. Consolidating these functions into 72 macro cells can simplify a board that otherwise needs several small programmable or discrete-logic devices. The -7 speed grade helps when several outputs must change within a constrained interval, while the 44-pin VQFP provides a modest footprint. Final selection should compare logic utilization, pin multiplexing constraints, and timing against the -10 grade before assigning the design.
Recommended
Recommended Products Summary
Engineering reference data for XC9572XL-7VQ44I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC9572XL-7VQG44I | XC9572XL-10VQG44I | XC9572XL-10VQG44C |
|---|---|---|---|---|
| Package | VQFP-44 | VQFP-44 | VQFP-44 | VQFP-44 |
| Brand | AMD | AMD | AMD | AMD |
| Device Type | 3.3 V CPLD | 3.3 V CPLD | 3.3 V CPLD | 3.3 V CPLD |
| Macro Cells | 72 macro cells | 72 macro cells | 72 macro cells | 72 macro cells |
| Usable Gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates |
| Speed Designation | -7; 7.5 ns | -7; 7.5 ns | -10; 10 ns | -10; 10 ns |
| Temperature Ordering Option | I - industrial | I - industrial | I - industrial | C - commercial |
| Function Blocks | 4 x 54V18 | 4 x 54V18 | 4 x 54V18 | 4 x 54V18 |
| Special Features | Industrial -7 speed option | G ordering suffix; qualification details require review | Slower -10 timing grade | Commercial -10 timing grade |
Key Differentiators
- Faster -7 timing grade within the same CPLD family (vs XC9572XL-10VQG44I)
- Industrial temperature ordering option (vs XC9572XL-10VQG44C)
- Closest same-speed documented family option (vs XC9572XL-7VQG44I)
Design Notes
Base the land pattern on the official 44-pin VQFP drawing in AMD datasheet DS057 rather than a generic 44-pin square package. Keep power and ground connections short, provide the decoupling arrangement specified by the manufacturer, and route high-transition-rate inputs away from sensitive outputs. Confirm exposed-pad or thermal requirements from the exact package drawing before releasing the PCB footprint; the available listing identifies VQFP-44 but does not reproduce every footprint dimension.
Analyze setup, hold, propagation, and skew separately rather than treating the advertised 125 MHz as a guaranteed system operating frequency. The 7.5 ns -7 device grade is faster than the 10 ns family option, but external traces, connector delay, clock uncertainty, and I/O loading can consume the available margin. Use the DS057 timing model and the actual board constraints to identify the limiting path, then preserve margin for temperature and process variation.
Do not treat any XC9572XL ordering code as interchangeable solely because the package is identical. Compare the speed suffix, I versus C temperature option, G ordering suffix, configuration behavior, and complete pin table. A -10 device may fit the footprint but reduce timing margin, while a C-grade device may not be acceptable for the intended industrial ambient. Request the exact suffix and validate its programmed configuration before production release.
Design the 3.3 V rail for static and switching current separately, then verify it against the XC9572XL-7VQ44I's specified operating range and I/O load. Place local high-frequency decoupling close to the supply pins and keep return paths continuous under high-di/dt operation. Because the exact power-consumption figures are not reproduced here, calculate board dissipation from the selected configuration, utilization, I/O activity, and supply voltage using the manufacturer's characterization information.
Compliance Information
The manufacturer datasheet identifies the device as an industrial 3.3 V CPLD but does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm current compliance documentation for the exact ordering code with AMD.