AMD

XC9572XL-7VQ44I - 72-Macro-Cell 3.3V CPLD | AMD

MPN: XC9572XL-7VQ44I ✓ Hoạt động
3.3 V Vdss 44-pin VQFP Package 7 ns grade; 7.5 ns specified for XC9572XL-7 Speed
MOQ: 1 |

XC9572XL-7VQ44I Tóm tắt

AMD XC9572XL-7VQ44I is a 3.3 V complex programmable logic device with 72 macro cells, four 54V18 function blocks, 1,600 usable logic gates, and a 7.5 ns propagation delay in a 44-pin VQFP package. The -7 speed grade targets designs requiring faster logic response than the 10 ns grade while retaining the established XC9500XL architecture.

A complex programmable logic device is a programmable digital logic category combining reconfigurable logic fabric, programmable interconnect, and user-defined input/output blocks. In the product hierarchy, a CPLD is a programmable-logic IC and sits alongside FPGA & CPLD devices. The XC9572XL family targets low-voltage communications, computing, industrial control, and embedded interface applications where deterministic logic, modest gate capacity, and nonvolatile configuration are useful.

Key features include 72 macro cells, four 54V18 function blocks, 1,600 usable gates, and a family propagation delay of 5 ns. The specific -7 suffix identifies a 7.5 ns device speed grade according to the distributor specification, while the I suffix identifies the industrial-temperature ordering option. Its 3.3 V operating supply supports modern low-voltage logic systems, and the 44-pin VQFP package provides a compact surface-mount footprint.

Internally, the XC9572XL architecture divides logic into four 54V18 function blocks. Their outputs connect through dedicated interconnect to programmable I/O blocks, allowing board-level logic to be consolidated into a single configurable device. This architecture is useful for bus decoding, address and command generation, protocol bridging, state machines, and fixed-function glue logic without occupying a large FPGA.

Typical uses include communications line-card control, embedded processor peripherals, industrial interface modules, test and measurement logic, data-acquisition control, and general-purpose board support logic. The 1,600-gate device is particularly appropriate when logic requirements remain modest and deterministic implementation is preferable to a soft processor or a much larger FPGA.

For PCB implementation, use the DS057 pinout and package information, preserve the manufacturer-specified decoupling and configuration requirements, and verify every signal against the 3.3 V domain. Programming support must also be checked against the installed AMD/Xilinx design environment and programmer before committing to an industrial design.

This page combines manufacturer architecture details, package and ordering information, practical CPLD design guidance, and a restrained replacement assessment. It distinguishes true same-footprint family options from broader functional alternatives so engineers can focus first on pin-level and timing compatibility.

Bộ thay thế dễ dàng lắp đặt cho XC9572XL-7VQ44I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

XC9572XL-7VQG44I

✅ Drop-In
📦 VQFP-44
Same XC9572XL architecture, 72 macro cells, 3.3 V supply, and -7 speed grade; ordering-code G requires qualification review

📋 Tham chiếu thay thế (không có trong danh mục)

XC9572XL-10VQG44I

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 VQFP-44
Same XC9572XL family and 44-pin VQFP format, but the -10 speed grade is approximately 2.5 ns slower than the -7 grade

📋 Tham chiếu thay thế (không có trong danh mục)

XC9572XL-10VQG44C

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 VQFP-44
Same XC9572XL family and 44-pin VQFP format, but uses the -10 commercial speed and temperature ordering option

📋 Tham chiếu thay thế (không có trong danh mục)

XC9572XL-7VQ44I Tỷ lệ tối đa & tính chất điện

Device Type Complex programmable logic device (CPLD)
Điện áp cung cấp 3.3 V
Macro Cells 72 macro cells
Function Blocks 4 function blocks
Function Block Architecture 54V18
Usable Logic Gates 1,600 gates
Family Propagation Delay 5 ns
Speed Grade 7 ns grade; 7.5 ns specified for XC9572XL-7
Maximum Frequency 125 MHz
Process Technology 0.35 µm CMOS
Hộp 44-pin VQFP
Số chân 44 pins
Kiểu lắp đặt Surface mount
Temperature Grade Industrial grade

Hướng dẫn cấu hình chân XC9572XL-7VQ44I 44-pin vqfp

Cấu hình chân cho XC9572XL-7VQ44I (44-pin vqfp gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 44-pin vqfp cho XC9572XL-7VQ44I

Không có dữ liệu chân cụ thể sẵn có cho XC9572XL-7VQ44I.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

XC9572XL-7VQ44I phù hợp cho 6 Áp dụngs: Communications Line-Card Control, Embedded Processor Peripheral Control, Industrial Interface and Bus Control, Test and Measurement Control, Data-Acquisition Control, Fixed-Function Glue Logic.

🌐

Communications Line-Card Control

The XC9572XL-7VQ44I suits compact communications line-card logic because its 72 macro cells and 1,600 usable gates can implement control, status, and interface functions without a large FPGA. Its 3.3 V supply matches modern single-board logic, while the -7 speed grade provides a 7.5 ns device timing option for short control paths. A typical design would use the CPLD for command decoding, interrupt routing, reset sequencing, and programmable backplane handling. The 44-pin VQFP also limits board area, although exact I/O assignments and timing must be taken from DS057.

🔧

Embedded Processor Peripheral Control

The XC9572XL-7VQ44I can consolidate deterministic peripherals around an embedded processor, including address decoding, interrupt control, watchdog logic, and peripheral multiplexing. Its 72 macro cells provide enough capacity for moderate control logic, while the -7 grade offers lower propagation delay than the 10 ns ordering option. The device does not replace a processor or general-purpose memory; instead, it handles fixed and board-specific functions that benefit from deterministic hardware response. Configuration compatibility and pin-level peripheral signals should be validated against the system timing budget.

🏭

Industrial Interface and Bus Control

For industrial interface modules, the XC9572XL-7VQ44I can implement bus arbitration, command translation, handshake sequencing, fault logging, and I/O control in a compact 44-pin VQFP. Its 72 macro cells and four 54V18 function blocks are appropriate for fixed protocols and moderately complex state machines that need reliable nonvolatile configuration. The 3.3 V device can support modern digital interfaces, but external level translation and electrical protection remain system-level requirements. Verify every interface voltage, rise-time requirement, and timing margin against the official DS057 tables.

🖥️

Test and Measurement Control

The XC9572XL-7VQ44I is useful for instrument-control logic that coordinates test sequences, trigger routing, status flags, and front-panel interfaces. The 1,600 usable gates can implement a compact deterministic controller without occupying an FPGA designed for high-speed parallel processing or large memory fabrics. Its 3.3 V operation and 44-pin VQFP simplify integration into moderately dense measurement boards. For timing-sensitive trigger paths, analyze the complete external setup-and-hold budget and use the -7 grade when the slower -10 variant does not provide sufficient margin.

📺

Data-Acquisition Control

The XC9572XL-7VQ44I can coordinate data-acquisition subsystems by handling channel sequencing, control-word generation, trigger routing, and status monitoring. Its 72 macro cells are suitable for a compact acquisition controller rather than high-channel-count processing. The 3.3 V supply aligns with many converter and interface subsystems, while the 44-pin VQFP supports space-constrained instrumentation. Designers should isolate high-current analog and switching sections, respect input/output timing requirements, and verify that the selected configuration file meets all acquisition timing constraints.

⚡

Fixed-Function Glue Logic

The XC9572XL-7VQ44I is effective for board-specific glue logic such as power sequencing, interrupt combination, reset generation, bus muxing, and legacy interface bridging. Consolidating these functions into 72 macro cells can simplify a board that otherwise needs several small programmable or discrete-logic devices. The -7 speed grade helps when several outputs must change within a constrained interval, while the 44-pin VQFP provides a modest footprint. Final selection should compare logic utilization, pin multiplexing constraints, and timing against the -10 grade before assigning the design.

Tóm tắt các sản phẩm được đề xuất

XC9572XL-7VQG44I Same-family 44-pin VQFP alternative Được sử dụng trong: Communications Line-Card Control, Industrial Interface and Bus Control, Data-Acquisition Control, Fixed-Function Glue Logic XC9572XL-10VQG44I Slower same-family logic option Được sử dụng trong: Communications Line-Card Control, Embedded Processor Peripheral Control, Test and Measurement Control, Data-Acquisition Control XC9572XL-10VQG44C Same-family commercial ordering option Được sử dụng trong: Embedded Processor Peripheral Control, Test and Measurement Control, Fixed-Function Glue Logic XC9572XL-7VQ44I AMD Được sử dụng trong: Industrial Interface and Bus Control
What is the AMD XC9572XL-7VQ44I?
The AMD XC9572XL-7VQ44I is a 3.3 V complex programmable logic device containing 72 macro cells, four 54V18 function blocks, and 1,600 usable gates in a 44-pin VQFP package. According to the AMD datasheet DS057, the XC9572XL family is intended for high-performance, low-voltage communications and computing systems. The -7 ordering option denotes a 7.5 ns speed grade, while I identifies the industrial-temperature version.
What are the key specifications of XC9572XL-7VQ44I that engineers should know?
The XC9572XL-7VQ44I combines 72 macro cells, four 54V18 function blocks, 1,600 usable logic gates, a 3.3 V supply, and a 7.5 ns speed grade in a 44-pin VQFP. According to AMD datasheet DS057, the underlying XC9572XL architecture has a 5 ns propagation-delay specification and routes function-block outputs through programmable interconnect to the I/O blocks. These figures define its suitability for compact deterministic control, interface, and state-machine logic.
Where can I download the XC9572XL-7VQ44I datasheet PDF?
The official XC9572XL High-Performance CPLD Data Sheet is available from AMD as document DS057, with the manufacturer page at https://docs.amd.com/v/u/en-US/ds057. A mirrored PDF is also listed at https://www.mouser.com/datasheet/2/903/ds057-1595690.pdf. Use the AMD copy as the controlling reference for architecture, timing, pin assignments, electrical characteristics, and package drawings.
Where can I find the XC9572XL pinout and 44-pin VQFP drawing?
The XC9572XL pin assignments and VQFP-44 land pattern are documented in AMD datasheet DS057. Locate the package information, pin table, and associated footprint drawings in that document before assigning PCB nets. The available listing confirms a 44-pin VQFP but does not provide the complete pin-number-to-signal sequence, so use the manufacturer drawing rather than inferring positions from a generic quad flat package illustration.
How do I program the XC9572XL-7VQ44I?
Program the XC9572XL-7VQ44I with an AMD/Xilinx-compatible programmer and the configuration settings required by the selected device family. The exact in-system interface, supported programmer models, and configuration procedure must be checked in DS057 and the relevant AMD/Xilinx programming documentation. The CPLD is normally configured through its dedicated programming connections, but those signals and voltage levels must be assigned exactly from the official pin table.
What can replace the XC9572XL-7VQ44I?
The closest documented same-footprint options are the XC9572XL family variants using the 44-pin VQFP package, particularly XC9572XL-7VQG44I, XC9572XL-10VQG44I, and XC9572XL-10VQG44C. AMD datasheet DS057 defines their shared XC9572XL architecture, while speed and temperature suffixes determine qualification and timing. A replacement should be checked for timing, temperature grade, configuration, and exact pin-level compatibility before use.
Can XC9572XL-7VQG44I replace XC9572XL-7VQ44I?
The XC9572XL-7VQG44I is the closest documented 44-pin VQFP alternative to the XC9572XL-7VQ44I and retains the same -7 speed designation and 3.3 V CPLD architecture. Its listed ordering form includes G, so procurement and quality documentation should be checked carefully before treating it as an exact replacement. Confirm the complete manufacturer pin table, temperature qualification, and configuration behavior for the exact suffix.
What is the difference between XC9572XL-7VQ44I and XC9572XL-7VQG44I?
The XC9572XL-7VQ44I and XC9572XL-7VQG44I both belong to the 3.3 V XC9572XL family and are offered in the 44-pin VQFP format with the -7 speed designation. The visible ordering-code difference is G, so they should not be treated as automatically identical without checking AMD ordering information and DS057. Confirm electrical ratings, temperature grade, pin definitions, and qualification records for each exact MPN.
When should I choose XC9572XL-7VQ44I over a 10 ns XC9572XL variant?
Choose XC9572XL-7VQ44I when the design benefits from its 7.5 ns speed grade and the 72-macro-cell XC9572XL architecture is sufficient for the required logic. A 10 ns family variant may be appropriate when timing margin is less important, availability is better, or a different temperature ordering option is required. Choose by analyzing worst-case paths and external interface timing rather than relying only on advertised frequency.
Is XC9572XL-7VQ44I suitable for industrial control logic?
The XC9572XL-7VQ44I is ordered as an industrial-grade device and is suitable for many industrial control, interface, and communications applications within its specified electrical limits. The I suffix identifies the industrial ordering option, but the exact minimum and maximum junction or ambient operating temperatures must be taken from DS057. Qualification also requires checking the voltage, clock, I/O, and reliability limits of the complete board design.
Where can I buy XC9572XL-7VQ44I and check current stock?
Use the Request a Quote form on this page to request current XC9572XL-7VQ44I availability, lot information, and a quotation. The form allows the request to be tied to the exact 44-pin VQFP MPN and required quantity. Current lead time and stock should be confirmed at quotation time because programmed-device inventory can vary by package suffix, temperature grade, and regional supply conditions.
What is the price of XC9572XL-7VQ44I?
A current unit quotation for the exact XC9572XL-7VQ44I is available through the Request a Quote form on this page. The form is the appropriate route for checking the device with the required 44-pin VQFP suffix, quantity, delivery schedule, and traceability requirements. Quote responses can reflect exact MPN status and supply conditions more reliably than an unqualified marketplace price.
What is the lead time for XC9572XL-7VQ44I?
Request the current lead time for XC9572XL-7VQ44I through the Request a Quote form on this page. Include the required quantity, target date, and whether factory-sealed packaging or additional traceability is needed. Because this is a legacy-compatible CPLD ordering code, lead time should be confirmed for the exact suffix rather than inferred from the broader XC9572XL or XC9500XL families.
Is XC9572XL-7VQ44I in stock?
Current XC9572XL-7VQ44I stock status should be confirmed through the Request a Quote form on this page. Provide the exact MPN and quantity so the response can distinguish the 44-pin VQFP industrial version from related speed grades, temperature options, and other package variants. This approach also establishes a documented quotation record for the requested supply commitment.
What is the best AMD or Xilinx equivalent for XC9572XL-7VQ44I?
The best same-family candidate documented for XC9572XL-7VQ44I is XC9572XL-7VQG44I, which uses the same 44-pin VQFP format and -7 speed designation. Broader CPLD equivalents from Intel, Lattice, or Microchip may provide similar programmable logic, but they cannot be treated as drop-in replacements without verifying package geometry, I/O standards, configuration method, macro-cell mapping, timing, and tool support. Use AMD DS057 as the compatibility baseline.

Dữ liệu tham khảo kỹ thuật cho XC9572XL-7VQ44I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the XC9572XL-7VQ44I when the design needs a compact 3.3 V CPLD with 72 macro cells, industrial ordering, and the faster 7.5 ns -7 timing grade. Select XC9572XL-7VQG44I as the closest documented same-family candidate when its exact G suffix and qualification records satisfy the program requirements. Consider XC9572XL-10VQG44I when timing margins permit the 2.5 ns slower -10 grade but industrial temperature coverage remains necessary. Use XC9572XL-10VQG44C only when a commercial-temperature option is acceptable. Broader Intel, Lattice, and Microchip CPLDs may offer similar programmable functionality, but they should not be treated as drop-in replacements without verifying package geometry, pinout, I/O standards, configuration method, macro-cell mapping, and tool compatibility.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này XC9572XL-7VQG44I XC9572XL-10VQG44I XC9572XL-10VQG44C
Package VQFP-44 VQFP-44 VQFP-44 VQFP-44
Brand AMD AMD AMD AMD
Device Type 3.3 V CPLD 3.3 V CPLD 3.3 V CPLD 3.3 V CPLD
Macro Cells 72 macro cells 72 macro cells 72 macro cells 72 macro cells
Usable Gates 1,600 gates 1,600 gates 1,600 gates 1,600 gates
Speed Designation -7; 7.5 ns -7; 7.5 ns -10; 10 ns -10; 10 ns
Temperature Ordering Option I - industrial I - industrial I - industrial C - commercial
Function Blocks 4 x 54V18 4 x 54V18 4 x 54V18 4 x 54V18
Special Features Industrial -7 speed option G ordering suffix; qualification details require review Slower -10 timing grade Commercial -10 timing grade

Bảo phân biệt quan trọng

  • Faster -7 timing grade within the same CPLD family (vsXC9572XL-10VQG44I)
  • Industrial temperature ordering option (vsXC9572XL-10VQG44C)
  • Closest same-speed documented family option (vsXC9572XL-7VQG44I)

Ghi chú thiết kế

Base the land pattern on the official 44-pin VQFP drawing in AMD datasheet DS057 rather than a generic 44-pin square package. Keep power and ground connections short, provide the decoupling arrangement specified by the manufacturer, and route high-transition-rate inputs away from sensitive outputs. Confirm exposed-pad or thermal requirements from the exact package drawing before releasing the PCB footprint; the available listing identifies VQFP-44 but does not reproduce every footprint dimension.

Analyze setup, hold, propagation, and skew separately rather than treating the advertised 125 MHz as a guaranteed system operating frequency. The 7.5 ns -7 device grade is faster than the 10 ns family option, but external traces, connector delay, clock uncertainty, and I/O loading can consume the available margin. Use the DS057 timing model and the actual board constraints to identify the limiting path, then preserve margin for temperature and process variation.

Do not treat any XC9572XL ordering code as interchangeable solely because the package is identical. Compare the speed suffix, I versus C temperature option, G ordering suffix, configuration behavior, and complete pin table. A -10 device may fit the footprint but reduce timing margin, while a C-grade device may not be acceptable for the intended industrial ambient. Request the exact suffix and validate its programmed configuration before production release.

Design the 3.3 V rail for static and switching current separately, then verify it against the XC9572XL-7VQ44I's specified operating range and I/O load. Place local high-frequency decoupling close to the supply pins and keep return paths continuous under high-di/dt operation. Because the exact power-consumption figures are not reproduced here, calculate board dissipation from the selected configuration, utilization, I/O activity, and supply voltage using the manufacturer's characterization information.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer datasheet identifies the device as an industrial 3.3 V CPLD but does not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm current compliance documentation for the exact ordering code with AMD.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

xc9572xl datasheet xc9572xl pinout xc9572xl programming XC9572XL-7VQ44I datasheet XC9572XL-7VQ44I pinout XC9572XL-7VQ44I equivalent XC9572XL-7VQ44I replacement XC9572XL-7VQ44I price XC9572XL-7VQ44I stock AMD XC9572XL-7VQ44I xc9572xl 10vqg44c xc9572xl 10vqg44i xc9572xl 10vqg64c xc9572xl 7vqg64i XC9572XL-7VQ44I 44-pin VQFP

Các bộ phận và thuật ngữ liên quan

AMD XC9572XL-7VQ44I XC9572XL-7VQG44I XC9572XL-10VQG44I XC9572XL-10VQG44C CPLD complex programmable logic device FPGA & CPLD programmable logic IC programmable interconnect I/O block macro cell 54V18 function block 3.3 V logic 7.5 ns propagation delay 1,600 usable gates 72 macro cells 125 MHz VQFP-44 VQFP package family surface mount industrial temperature grade AMD datasheet DS057 communications control logic embedded peripheral control
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ