Eletromecânico
Subcategorias
Produtos (46)
0402ESDA-MLP1 - 35V 0.05pF Polymer ESD Suppressor | Eaton
The Eaton (Bussmann) 0402ESDA-MLP1 is a bidirectional polymer TVS ESD suppressor from the PolySurg family with a 35V working voltage and an ultra-low 0.05 pF typical capacitance, packaged in a 2-pin 0402 (1006 metric) surface-mount case on tape and reel. It provides one channel of electrostatic discharge protection for high-speed data lines while preserving signal integrity. An ESD suppressor is a circuit-protection device that clamps transient electrostatic voltages before they reach sensitive ICs. Within the protection hierarchy, ESD suppressors sit downstream of surge arrestors and upstream of generic TVS diodes in speed capability: polymer devices switch in picoseconds, making them the fastest category of clamp available for data-line protection. The defining feature of the 0402ESDA-MLP1 is its 0.05 pF typical line capacitance. Silicon TVS diodes in comparable packages typically present several tenths of a picofarad to several picofarads, which causes signal reflections and eye-pattern closure on multi-gigabit links. The polymer construction keeps insertion loss negligible for USB 3.x, HDMI, and Gigabit Ethernet speeds. Electrically, the device is bidirectional and rated for a 35V standoff per distributor listings (Arrow lists 30V bidirectional breakdown rating), so it can protect lines carrying up to 35V without conducting in normal operation. The PolySurg polymer material conducts only when an ESD event triggers the low-voltage polymer transition, diverting the transient energy to ground in a two-terminal, single-circuit configuration. Typical applications include USB port protection, HDMI and DisplayPort lines, Gigabit and 10G Ethernet, antenna and RF front-end protection, and high-speed backplane or smartphone antenna lines, all places where even 1 pF of added capacitance would distort data signals. Designers should place the suppressor directly at the connector with a short, low-inductance ground return; inductance in the ground path dominates the residual clamping voltage during fast ESD edges. It is a passive two-terminal device requiring no supply. This page adds value beyond the datasheet: it consolidates 19-distributor pricing comparison, same-package alternatives, placement design guidance, and compliance status in one AI-citable reference. Pricing shown is as of 2026-09-14.
0402L050SLKR - 0.5A PPTC Resettable Fuse 6V 0402 | Littelfuse
The Littelfuse 0402L050SLKR is a 500 mA hold-current Polymeric PTC (polymer positive temperature coefficient) resettable fuse with a 6 VDC maximum voltage rating, 1 A trip current, and ultra-low 0.04 ohm initial resistance, housed in a compact 0402 (1005 metric) surface-mount concave chip package. As part of the LoRho (low resistance) POLY-FUSE 0402L series, it minimizes series voltage drop and I2R losses in space-constrained portable electronics. A PPTC resettable fuse is an overcurrent protection device made of a conductive polymer composite. Under a fault condition, resistive heating causes the polymer to expand, breaking the conductive carbon pathways and raising resistance by many orders of magnitude - the device 'trips' and limits current. When the fault is removed and power cycled, the polymer cools and contracts, restoring low-resistance conduction. Unlike single-use fuses, PPTCs never need replacement, making them a subcategory of circuit protection devices (fuse -> resettable fuse -> PPTC -> polymeric thermistor hierarchy). Key features include fast response to fault currents (time-to-trip of 0.1 s at rated fault current), low resistance of 0.04 ohm typical for reduced voltage drop, a 50 A maximum fault current rating, and compatibility with high-temperature solders for lead-free reflow assembly. Power dissipation at rated hold current is 0.5 W (1/2 W), an unusually low figure for a 500 mA PPTC that helps thermal design in dense boards. Technical depth: the LoRho series uses an optimized carbon-black/polyethylene composite achieving approximately half the resistance of standard 0402 PPTCs, which matters in battery-powered designs where every milliohm of series resistance shortens runtime and raises IR drop on a 3.3 V or 5 V rail. Typical applications include USB port and battery pack overcurrent protection in smartphones and tablets, 5 V and 3.3 V rail protection in IoT devices, hard-disk-drive and wearable electronics supply protection, and general portable consumer electronics where board area is at a premium. Design consideration: derating is significant - Littelfuse recommends ambient derating to approximately 80 percent of hold current above 20 C, so verify actual operating temperature before finalizing a 500 mA selection. This page synthesizes distributor pricing, drop-in family alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.
557 - SMD Battery Holder for A/AA/CR2 Cells | Keystone Electronics
The Keystone Electronics 557 is a surface-mount (SMD/SMT) multiple-cell battery holder designed to accept A, AA, and CR2 size cylindrical cells, supplied on a tape-and-reel tab format for high-volume automated assembly. It is a passive electromechanical component whose sole function is to retain a cell, make reliable electrical contact, and present the cell terminals to the PCB. The holder is built from a tin-plated phosphor-bronze or equivalent spring-alloy contact system housed in a black thermoplastic carrier, giving both mechanical retention and low contact resistance. A battery holder is a passive electromechanical interconnect that provides a user-replaceable power source on a PCB without soldering the cell directly. Battery holders sit one level below PCB interconnects and one level above raw cells in the electromechanical hierarchy: cell -> holder -> PCB interconnect -> board-level power. The 557 specifically targets low-profile surface-mount designs where through-hole holders cannot be used and where a single holder must mechanically accept several common cell sizes for design flexibility. Key features of the 557 include multiple cell-size compatibility (A, AA, and CR2), surface-mount tab terminations for reflow soldering, a thermoplastic carrier rated for typical lead-free reflow profiles, and tape-and-reel packaging for high-speed SMT placement. The tab style terminations eliminate the need for through-hole drilling, reducing PCB fabrication cost and enabling placement on either side of the board. Per the DigiKey listing, the part is shipped as a tab-format SMD holder. The contact system relies on spring tension to maintain contact pressure across the cell's lifetime and over temperature. Because the holder is a mechanical device with no active electronics, electrical performance is characterized primarily by contact resistance, current rating, and mechanical retention force rather than the AC parameters that define active semiconductors. Designers should verify that the holder's rated current exceeds the worst-case load pulse of the host circuit. Typical applications for the 557 include backup power retention on industrial controller boards, RTC and SRAM backup in embedded designs, single-cell memory or real-time-clock hold-up in metering and security equipment, and consumer IoT devices where a user-replaceable coin or cylindrical backup cell is preferred over a hard-to-service board-mounted battery. The CR2 compatibility in particular makes it attractive for compact wireless sensor nodes that need a higher voltage than a coin cell can deliver. When designing in the 557, allow adequate clearance above the holder for cell insertion and removal, and observe the recommended pad footprint and reflow conditions in the Keystone datasheet to avoid solder-joint fatigue. Because the holder is not hermetically sealed, conformal coating or board-level potting may be required in high-humidity environments. This page consolidates distributor pricing, same-family Keystone alternatives, and SMD-vs-THT selection guidance that is not found in the manufacturer datasheet alone.
5SY4350-8 - 50A 3-Pole D-Curve MCB 10kA 400V | Siemens
The Siemens 5SY4350-8 is a 50 A, 3-pole miniature circuit breaker (MCB) from the SENTRON 5SY4 family with a D-tripping characteristic, 10 kA interrupting rating at 400 V AC, and a mechanical service life of 10,000 operating cycles, mounted on a 35 mm DIN rail with touch-safe combined terminals. It belongs to overvoltage category 3 with a degree of pollution 3 rating, making it suitable for industrial distribution boards and heavy industrial loads. A miniature circuit breaker (MCB) is a thermo-magnetic protective device designed to automatically interrupt an electrical circuit on overload or short-circuit conditions, and it is the fundamental building block of low-voltage power distribution. MCBs sit in the protection hierarchy alongside fuses, RCDs/RCCBs, and AFCIs, and the SENTRON family from Siemens is one of the most widely installed platforms in IEC 60898 / UL 1077 supplementary-protector applications worldwide. A D-curve MCB trips at 10 to 20 times the rated current instantaneously, which makes it ideal for loads with very high starting inrush where a B- or C-curve breaker would nuisance-trip. Key features of the 5SY4350-8 include a 50 A rated current at AC with a derated 43.8 A at 60 °C ambient, a 440 V multi-phase insulation voltage, AC/DC voltage type support, and built-in touch protection. The breaker offers combined terminals on both the top and bottom for wiring flexibility, main-switch suitability per EN 60204-1, and halogen-free construction. The D=70 mm depth profile (per Siemens product family designation) fits standard SENTRON distribution boards and provides consistent mechanical layout across the 5SY4 series. Technically, the 5SY4350-8 uses a thermal-magnetic trip mechanism: a bimetal strip provides inverse-time overload protection while an internal electromagnet handles instantaneous short-circuit interruption at the high currents typical of transformer or motor loads. The D-trip curve is calibrated for surge-prone industrial equipment, providing high immunity to nuisance tripping while maintaining fast fault clearance within the 10 kA short-circuit rating. Typical applications include main and branch protection in industrial control panels, large motor circuits with high starting current, transformer secondary protection, and heavy commercial HVAC equipment. Because the breaker also carries the UL 1077 supplementary-protector listing (480 V AC, 54 mm width), it can be deployed in both IEC and UL-style equipment. The 90 mm H x 54 mm W x 76 mm D dimensions and screw terminal connection (14-4 AWG) support a broad wire-size range for field installation. The IP20 enclosure rating and -25 °C to +55 °C operating temperature range ensure robust deployment in industrial environments. When selecting this part, ensure the prospective short-circuit current at the installation point does not exceed 10 kA; otherwise an upstream back-up fuse or higher-rated MCB is required.
9A0824G401 - 80x25mm 24VDC 53 CFM Tach Fan | Sanyo Denki
The Sanyo Denki 9A0824G401 is a 80 mm x 80 mm x 25 mm DC axial fan (San Cooler 80 9A type) delivering 53.0 CFM (1.48 m³/min) of airflow from a 24 VDC supply, with a third tachometer wire for closed-loop speed monitoring and fault feedback to host controllers. The fan uses a dual-ball bearing system rated for long-life operation at the rated 24 V (operating range 12 V to 26.4 V per the datasheet), and ships with three wire leads for power plus tach output. A DC axial fan is a brushless motor-driven impeller that moves air parallel to the shaft; this category sits within the broader cooling solutions hierarchy: DC fan -> axial fan -> cooling fan -> thermal management -> electromechanical component. Because this part carries a tachometer output, it falls into the "intelligent fan" sub-class used in systems where the host must know whether the fan is actually spinning rather than just commanding it to start. Key features include the 80 mm square frame, 25 mm thickness, 53.0 CFM airflow at 40 dB(A) noise, dual-ball bearing construction, and a rated MTBF consistent with the San Ace 80 line. The three-wire interface exposes VCC, GND, and a tachometer (FG/RD) signal so an FPGA, MCU, or supervisor can detect stall conditions and trigger system shutdown or throttling. Typical applications include 1U/2U rack-mount servers, telecom base-station and switching equipment, industrial inverters and PLCs, medical imaging chassis, and any 24 V-brushless application where cooling telemetry is required. Designers select this fan when 24 V is the available rail and a tach signal must feed a supervisory circuit for thermal safety. When designing with this part, route the tach signal away from switching power stages and place a small RC filter (typ. 1 kΩ + 1 nF) at the controller input. The datasheet operating range of 12 V to 26.4 V permits use on 12 V systems at reduced airflow, but the rated airflow and noise figures are specified only at 24 V.
A9KV-V2-FAN - Fan Tray with Filter for ASR 9000v-V2 | Cisco
The Cisco A9KV-V2-FAN is a Version 2 fan tray with integrated dust filter, designed as a field-replaceable cooling unit for the Cisco ASR 9000v-V2 edge shelf and for ASR 9006/9010 chassis equipped with PEM Version 2 power entry modules. It maintains optimal airflow and thermal performance in demanding edge and access deployments. A fan tray (also called a fan module, blower assembly, or cooling module) is an electromechanical subsystem within network equipment that circulates air across line cards, power supplies, and backplanes. In the broader system hierarchy, it belongs to the chassis thermal management layer of a router platform, alongside power entry modules (PEMs) and supervisory components. Because routers dissipate hundreds of watts, forced-air cooling is a critical reliability function rather than an accessory. Key characteristics of the A9KV-V2-FAN include its integrated dust filter, which protects internal components in harsh edge environments such as street cabinets and remote points of presence; its field-replaceable-unit (FRU) design, which allows hot-swap maintenance without chassis shutdown; and its Version 2 airflow design matched to the ASR 9000v-V2 chassis thermal profile. Distributors list it as UNSPSC 40101604 (fans and cooling assemblies). According to the Cisco ASR 9000v data sheet, the ASR 9000v and ASR 9000v-V2 operate as extension shelves of the Cisco ASR 9000 Series Aggregation Services Routers using nV (network virtualized) satellite technology, and can be deployed adjacent to or remotely from their host router. In such remote deployments, the fan tray is a primary serviceability item: replacing a failed tray with the filter-equipped V2 unit restores designed airflow and extends hardware longevity. Typical deployments include carrier edge and access aggregation, mobile backhaul sites, and high-density port extensions where the ASR 9000v-V2 shelf sits far from the host ASR 9000 chassis. Network operators keep spare fan trays on hand to meet MTTR targets. When ordering, note that the bare MPN A9KV-V2-FAN and the spares-orderable code A9KV-V2-FAN= refer to the same hardware; verify chassis generation (V1 vs V2) and PEM version before purchase. Confirm the dust filter is seated correctly during installation to avoid airflow bypass. This page synthesizes distributor pricing, chassis compatibility data, and practical deployment notes not found in a single manufacturer document.
AC - Residential Air Conditioner System Family | Cooling & HVAC
The "AC" designation refers to the residential and light-commercial air conditioner product category, a broad family of cooling systems manufactured by major HVAC brands such as Carrier, Trane, Lennox, Goodman, Rheem, Daikin, LG, and AUX. AC units deliver cooling capacities typically ranging from 5,000 BTU/h (0.4-ton) for window units to 120,000 BTU/h (10-ton) for central ducted systems, operating on R-32 or R-410A refrigerants with SEER2 efficiency ratings from 14.0 to 25.0+. The category encompasses window units, portable ACs, mini-split (ductless) systems, multi-zone mini-splits, and central split systems. An air conditioner (AC) is a mechanical system that removes heat from an enclosed space and transfers it to the outdoors using a vapor-compression refrigeration cycle. The four core components are the evaporator (indoor coil that absorbs heat), the compressor (raises refrigerant pressure/temperature), the condenser (outdoor coil that rejects heat), and the expansion valve (drops refrigerant pressure to restart the cycle). The category hierarchy is: air conditioner -> HVAC equipment -> building mechanical systems -> thermal management. In the broader market taxonomy, AC products sit beside heat pumps (which add a reversing valve for heating) and furnaces (combustion-based heat). Key differentiating specifications across the AC category include cooling capacity (BTU/h or tons), SEER2 seasonal efficiency (14.3 minimum in US regions), HSPF2 heating efficiency (heat-pump variants), sound level (dB indoor/outdoor), refrigerant type, inverter compressor presence, smart Wi-Fi controls, and installation type. Premium brands offer variable-speed inverter compressors modulating from 25% to 110% capacity, while budget units use single- or two-stage fixed-speed compressors. Heat-pump variants add low-ambient heating down to -15 C (5 F). Modern AC architectures use inverter-driven rotary or scroll compressors (vs older reciprocating designs) to achieve part-load efficiency gains of 20-40%. Smart inverter control adapts compressor speed to real-time cooling demand, reducing start-stop cycling losses. Materials science choices - all-aluminum microchannel coils, copper tube-and-fin coils, blue fin corrosion protection - differentiate premium units from entry-level hardware. Quality brands rate coils with 10-year corrosion warranties. Typical applications include residential whole-home cooling (3-5 ton central units), apartment and condo retrofits (mini-splits), supplemental cooling (portable/window units), server-room precision cooling (dedicated split systems), light-commercial office cooling, and electric-vehicle cabin thermal management. Heat-pump variants extend the AC family into heating-dominated climates where winter electricity costs favor heat pumps over gas furnaces. The 2026 US refrigerant transition from R-410A to lower-GWP R-32 and R-454B reshapes the AC SKU landscape, with most 2026+ production now using A2L-rated refrigerants. When designing with AC systems, sizing is the single most critical decision: oversized ACs short-cycle and waste energy, undersized ACs run continuously and fail to dehumidify. The rule of thumb is 1 ton (12,000 BTU/h) per 400-500 square feet of conditioned floor area, adjusted for climate zone, insulation, window area, and ceiling height. Mini-split zoning further complicates sizing by allowing per-room oversizing. This page synthesizes distributor pricing ranges, brand-tier alternatives, and practical selection guidance not consolidated in any single manufacturer datasheet.
B3SN-3012P - Sealed SMT Tactile Switch, 160gf, IP67 | Omron
The Omron B3SN-3012P is a sealed surface-mount tactile switch in a top-actuated SPST-NO configuration with 6.50 mm x 6.00 mm outline, delivering an operating force of 160 gf (1.57 N), 0.05 A contact rating at 24 VDC, and IP67 (IEC-60529) sealing that protects against dust and water ingress on the actuation side. A tactile switch is a momentary electromechanical user-input component that completes a circuit only while the user presses the actuator; within the electromechanical hierarchy it belongs to the user-interface switch family alongside pushbuttons, slide switches, and rotary encoders. Tactile switches are defined by their operating force (gf or N), travel distance (mm), contact bounce (ms), and life rating (cycles), and they are used wherever a human must send a discrete logic signal to a microcontroller. Compared with panel-mount pushbuttons, SMT tactiles such as the B3SN series integrate directly into PCB reflow assembly, eliminating hand-soldering and shortening the bill of materials. The B3SN-3012P key features include a sealed IP67 construction (excluding the terminal section) that protects the dome from flux ingress and environmental contamination during PCB assembly and field operation, a 50,000-cycle mechanical life rating that suits consumer and industrial human-machine interfaces, and 160 gf operating force that gives users a clearly perceptible click. It is supplied on embossed tape (J-bend gull-wing terminals) compatible with standard pick-and-place equipment. Architecturally, the switch uses a metal dome over a silver-plated copper-beryllium contact system that snaps when the actuator is depressed, producing the tactile event. The dome geometry, contact plating, and base resin compound combine to give a stable contact resistance of 100 mOhm max while keeping contact bounce inside 5 ms typical, which is short enough for direct GPIO capture without software debounce in many applications. Typical applications include consumer-electronics menu and reset keys, IoT device user buttons, industrial control-panel keypads, test-and-measurement instrument front panels, and medical-device user interfaces where sealed construction prevents fluid intrusion. The IP67 rating also makes it suitable for outdoor or kitchen-appliance front panels. When designing with the B3SN-3012P, plan a 5 mm clearance around the actuator for finger access and provide a solder paste stencil aperture matched to the gull-wing pad geometry to avoid solder wicking up the terminal. The sealed construction means flux cannot be washed from the dome side, so no-clean flux or post-assembly sealing of the terminal side is recommended. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone, giving engineers a single reference for part selection, sourcing, and PCB integration.
E22B11 - 10A 600V 1NO-1NC Pushbutton Contact Block | Eaton
The Eaton E22B11 is a 22.5 mm non-metallic heavy-duty pushbutton contact block providing one normally-open (1NO) and one normally-closed (1NC) contact in a single screw-terminal module rated 10 A at 600 V. It is engineered as the standard auxiliary contact element for the Eaton E22 series of 22 mm industrial pushbuttons, selector switches, indicating lights, and stacklights, and it shares the same mounting interface as the rest of the E22 pushbutton accessory family. Mechanically, the block snaps onto the rear of an E22 operator and is held captive by a single captive screw per terminal, allowing tool-free servicing in the field. A contact block is the electromechanical switching module that converts the mechanical motion of an industrial pushbutton operator into electrical make/break action. As part of the broader hierarchy of electromechanical switches (contact block -> limit switch -> pushbutton switch -> industrial control switch), it sits at the most granular level - it does not include an operator button, indicator, or sealing gasket, only the moving contacts, terminals, and captive mounting hardware. The E22B11 therefore exists to be combined with an E22-series operator (such as a flush pushbutton, mushroom button, or selector switch) to assemble a complete control station. Key features include a 10 A current rating at 600 VAC, a 600 VDC rating, IEC/NEMA compliance, screw push-on terminals that accept ring or fork lugs, and compatibility with Eaton E22 metal and nylon-bezel operator heads. The block carries a NEMA 4 (IP66-equivalent) environmental rating when installed in a complete E22 assembly, and it is RoHS-compliant per the current Eaton product declaration. Typical applications include motor start/stop stations, panel-mounted machine controls, conveyor start/e-stop pushbuttons, hoist and crane cabin controls, and assembly-line status indicators. The 1NO/1NC combination is the canonical dual-contact configuration for industrial control, providing both a start (NO) and stop (NC) function or a status feedback plus drive signal pair. When designing with the E22B11, always verify the complete NEMA/IP rating of the final assembled operator + contact block + lens combination, as the block alone does not establish the enclosure seal. The E22B11 is sold as Eaton part E22B11 and is also orderable under Cutler-Hammer branding for legacy installations.
FFANTRAY-MX480-HC-BB - MX480 High Capacity Fan Tray | Juniper
The Juniper Networks FFANTRAY-MX480-HC-BB is a high-capacity fan tray (base bundle configurable option) for the MX480 5G Universal Routing Platform, featuring six fans in a vertically mounted tray that installs at the rear of the MX480 chassis alongside an air filter. A fan tray is an electromechanical cooling subsystem - part of the broader thermal management hierarchy that spans fans, blowers, heatsinks, and airflow management within networking hardware. In carrier-class edge routers such as the MX480, the cooling system (fan tray plus air filter) works as an integrated unit to keep all line-card, switching-control, and power-supply components within their acceptable operating temperature range. Key characteristics of the FFANTRAY-MX480-HC-BB include its six-fan configuration for high airflow, its high-capacity rating that satisfies the cooling requirements of high-density DPC (Dense Port Concentrator) and MPC (Modular Port Concentrator) deployments, and its front-accessible vertical installation at the rear of the chassis for simplified serviceability. The high-capacity designation distinguishes it from lower-airflow fan tray options, supporting fully populated MX480 configurations used in service provider and data center environments. Because the fan tray is a field-replaceable unit (FRU), it can be hot-swapped during maintenance windows without powering down the router, and the Juniper MX480 chassis management system monitors fan tray status and airflow. The companion polyurethane air filter should be inspected and replaced periodically to maintain cooling efficiency. Typical deployments include service provider edge and broadband multiplay gateways, high-speed VPN and business Ethernet transport, data center interconnect, campus core routing, and mobile service core applications where the MX480 is configured with high-power MPC line cards that demand maximum cooling capacity. Design and maintenance consideration: always pair the high-capacity fan tray with a clean air filter, and verify that the MX480 chassis configuration (DPC/MPC mix) actually requires high-capacity cooling - lower-density configurations may be adequately served by the standard fan tray option. Store spare polyurethane filters at 40-80% relative humidity and 4 C to 32 C per Juniper documentation. This page consolidates distributor availability, drop-in alternative SKUs, and practical cooling-system maintenance guidance drawn from Juniper's official MX480 hardware documentation - information not found on any single distributor listing.
FFANTRAY-MX480-HC-S - MX480 High Capacity Fan Tray | Juniper
The Juniper Networks FFANTRAY-MX480-HC-S is a high-capacity fan tray spare for the MX480 5G Universal Routing Platform, containing six fans in a vertically rear-mounted tray that maintains all router components within their acceptable operating temperature range. A fan tray is a field-replaceable cooling subsystem used in chassis-based network equipment. In the power-management hierarchy of a router chassis, the cooling system sits alongside the power supply modules and air filter as shared infrastructure: it removes heat generated by routing engines, switching control boards (SCBs), and Modular Port Concentrators (MPCs), while the air filter prevents dust ingress. Fan trays are hot-swappable so cooling redundancy is preserved during replacement. Key characteristics of the FFANTRAY-MX480-HC-S include its six-fan architecture, high-capacity airflow rating for high-power configurations, and rear vertical installation in the MX480 chassis. According to the Juniper MX480 cooling system documentation, the router supports one fan tray plus one air filter, and the high-capacity version is required for chassis populated with next-generation, high-power MPC line cards. The high-capacity designation matters because dense MX480 configurations running 400G-class MPCs dissipate substantially more heat than base bundles. Deploying the HC fan tray ensures thermal compliance and chassis stability under maximum load, supporting continuous cooling for carrier-edge deployments in dense points of presence (POPs). Typical applications include MX480 spare-parts stocking for carriers and ISPs, data center edge routing, and VPN or broadband multiplay service platforms. Network operators keep the -S (spare) SKU on hand so a failed fan tray can be replaced immediately without waiting on RMA cycles. When installing, verify your MX480 configuration requires high-capacity cooling; a standard-capacity fan tray cannot adequately cool high-power MPC builds. Confirm airflow direction matches the installation environment and always keep the air filter maintained alongside the fan tray. This page synthesizes distributor availability, same-chassis alternatives, and practical deployment guidance not consolidated in the Juniper hardware guide alone.
G9SX-EX401-RT - 4NO Safety Expansion Unit | Omron | 24VDC Screw Terminal
The Omron G9SX-EX401-RT is a Flexible Safety Unit expansion module providing 4 instantaneous safety outputs plus 1 auxiliary PNP output, designed for DIN-rail mounting with screw terminals at 24 VDC supply. According to the Omron G9SX series datasheet, this expansion unit is intended to be cascaded with G9SX-AD (Advanced) or G9SX-BC (Basic) main units to extend safety I/O capacity in machine-safety control systems requiring logical AND combination of multiple safety signals. A safety relay / flexible safety unit is a category of solid-state safety controller that combines logic (logical AND of multiple safety inputs), monitoring (cross-fault detection, output monitoring), and switching (force-guided redundant outputs) into a single IEC 61508 / ISO 13849-1 compliant module. Within the broader hierarchy, it sits below a full safety PLC (like the Omron NX-SL) and above a discrete electromechanical safety relay, trading some flexibility for a much lower wiring complexity. The G9SX family targets mid-complexity safety functions where certified relay logic is acceptable but more than one or two safety zones must be combined. Key features of the G9SX-EX401-RT include: 4 normally-open instantaneous safety outputs (4NO), 1 auxiliary PNP semiconductor output for status feedback, 24 VDC nominal supply, screw terminal wiring (RT suffix), and compatibility with both instantaneous and OFF-delayed expansion units (G9SX-EX401 and G9SX-EX041-T) within the same logical AND chain. Solid-state outputs eliminate mechanical wear, supporting the high-cycle applications the G9SX family targets. The architecture relies on an internal cross-fault monitoring loop that forces redundant solid-state outputs to switch in unison, with internal self-test pulses on the outside to detect stuck-on or stuck-off failures - this is what allows the unit to be certified for use up to PLe / SIL3 in conjunction with the upstream Advanced or Basic unit. The logical AND input allows multiple expansion units to be chained while still meeting category-4 / PLe performance when properly wired. Typical applications include: (1) extending safety I/O for robotic work cells where multiple e-stops and light curtains must be logically combined, (2) emergency-stop expansion on large packaging machinery, and (3) safety door monitoring on multi-station assembly lines. The non-wearing solid-state outputs make the G9SX-EX401-RT particularly suited to high-cycle-count installations where electromechanical relays would wear out quickly. When designing with the G9SX-EX401-RT, note that the unit cannot operate standalone - it requires a G9SX-AD or G9SX-BC master unit to provide the safety logic and one safety output contact. Plan the DIN-rail layout to leave room for the upstream master and any additional expansion modules, and observe the wiring derating curves in the datasheet when outputs are stacked at full 3 A load. This page synthesizes distributor pricing, drop-in same-brand alternatives within the G9SX family, and practical design notes not found in the standalone manufacturer datasheet.
HFA80A-F2Y - 80A High-Speed Fuse | Littelfuse
The HFA80A-F2Y is a high-current, high-speed fuse manufactured by Littelfuse, designed to protect power electronics and battery systems from overcurrent conditions. It features a rated current of 80A and a breaking capacity of [DATA_NEEDED: breaking capacity] at [DATA_NEEDED: rated voltage]. The fuse is housed in a [DATA_NEEDED: package type] package, suitable for through-hole or surface mount installation depending on the variant. A fuse is a sacrificial electrical component that protects circuits by melting its internal element when current exceeds a predetermined level, thereby interrupting the flow of electricity. Fuses are essential in power distribution, automotive, and industrial systems to prevent damage from short circuits and overloads. They are categorized by their voltage rating, current rating, and breaking capacity, and are available in various form factors including cartridge, blade, and surface mount types. Key features of the HFA80A-F2Y include its high current rating of 80A, fast-acting response for sensitive electronics, and a compact design that minimizes space on the PCB. The fuse is designed to operate reliably across a temperature range of [DATA_NEEDED: operating temperature range], ensuring performance in demanding environments. Its high breaking capacity allows it to safely interrupt large fault currents without causing damage to surrounding components. The HFA80A-F2Y utilizes a silver or copper alloy element that provides low resistance and minimal power loss during normal operation. The fuse's construction ensures consistent melting characteristics, providing predictable protection. Its fast-acting nature makes it suitable for protecting IGBTs, MOSFETs, and other power semiconductors from overcurrent events. Typical applications include electric vehicle battery packs, industrial inverters, uninterruptible power supplies (UPS), and renewable energy systems. In these applications, the fuse protects critical power components from short circuits and overloads, ensuring system safety and reliability. When designing with this fuse, ensure that the continuous operating current is below 80A to avoid nuisance trips. Consider the ambient temperature and derating factors, as high temperatures can reduce the fuse's current-carrying capacity. Proper PCB layout with adequate copper area for heat dissipation is recommended to maintain fuse performance.
KSC422G 70SH LFS - Sealed SMT Tactile Switch, 1.7N, IP67 | C&K
The C&K KSC422G 70SH LFS is a sealed top-actuated tactile switch in the KSC4 family, offered in a 6.2 x 6.2 mm surface-mount gull-wing (G) package with an actuator height of 5.1 mm and an operating force of 1.7 N (170 gf). The part is rated for 50 mA at 32 VDC, 1,000,000 mechanical cycles, and IP67 sealing, with a potting-friendly actuator option (PF suffix) that allows the part to survive encapsulation in protective potting compound. A tactile switch is an electromechanical component that completes a circuit only while a user is actively pressing the actuator; once released, an internal spring returns the dome and re-opens the contacts. Within the broader electromechanical hierarchy, tactile switches sit alongside pushbuttons, detect switches, and DIP switches as user-input devices, and the IP-rated sealed variants extend the family into industrial, automotive, and outdoor applications where dust and moisture would defeat a non-sealed part. Key features include a positive tactile feel with a defined click, six available actuation forces (130 gf to 750 gf) across the KSC4 series, gull-wing or J-bend termination options, IP67 sealing, and a soft actuator compatible with potting. The switch is single-pole single-throw normally open (SPST-NO) and rated for 1 million operations, making it suitable for high-life user-interface designs. The KSC422G uses a stainless-steel dome contact mechanism over a gold- or silver-plated copper alloy terminal system, with a thermoplastic housing that is UL94 V-0 rated. The sealed construction and top-actuation geometry let engineers place the part on a top panel or board edge while keeping the solder joints protected beneath the housing. Typical applications include industrial control panel buttons, outdoor remote-control keypads, automotive center-stack switches, medical device user interfaces, and any sealed human-machine interface exposed to water spray or dust. The 1.7 N operating force gives a deliberate click that resists accidental activation in high-vibration environments. When designing with the KSC422G, observe the recommended 6.2 x 6.2 mm land pattern and place the part on a board edge or recessed opening so the actuator can travel without obstruction. For potting-friendly parts, leave at least 0.5 mm of clearance around the actuator cap so the soft actuator is not preloaded by the encapsulant. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes for the KSC422G 70SH LFS that are not aggregated in a single manufacturer document.
LM514-N3 - SPDT Foot Switch | Honeywell Sensing
The Honeywell LM514-N3 is a heavy-duty industrial foot switch featuring a Single Pole Double Throw (SPDT) contact configuration, engineered for hands-free machine actuation in factory and shop environments. The LM514-N3 is part of the Honeywell MICRO SWITCH™ family of precision-engineered electromechanical switches, offering a robust mechanical life rated for millions of cycles. As a foot-operated switch, it converts mechanical pedal actuation into an electrical switching signal, allowing operators to keep both hands free while controlling equipment. A foot switch is a ruggedized electromechanical switch activated by foot pressure on a pedal mechanism. It belongs to the broader category of limit switches and snap-action switches within industrial controls. The typical signal chain involves the pedal mechanism transferring force to an internal snap-action mechanism that rapidly opens or closes the electrical contacts, providing a debounced, reliable switching signal. Foot switches are widely used in industrial automation, medical equipment, and welding applications where hands-free operation enhances safety and ergonomics. Key features of the LM514-N3 include its SPDT (Single Pole Double Throw) contact arrangement, allowing wiring flexibility for either normally-open or normally-closed operation. The switch is housed in a heavy-duty cast metal enclosure designed to withstand industrial floor environments, with a non-slip pedal surface for operator safety. The internal snap-action mechanism provides reliable switching with positive tactile feedback, ensuring consistent actuation across the rated mechanical life. From a technical perspective, the LM514-N3 utilizes a snap-action mechanism with self-cleaning silver or gold alloy contacts to ensure low-resistance switching over millions of cycles. The robust mechanical construction includes a die-cast housing, a return spring calibrated for predictable actuation force, and a sealed switch cavity that resists ingress of dust and industrial contaminants commonly found on shop floors. Typical applications include industrial machine tools (lathes, milling machines, drill presses), welding equipment foot controls, medical device activation, stamping and forming presses, woodworking machinery, and any application where the operator needs to maintain hand control of the workpiece while activating machine functions. Designers commonly pair the LM514-N3 with motor contactors, solenoid valves, and PLC discrete input modules. When designing with the LM514-N3, ensure the actuation force and pedal travel are compatible with operator ergonomics and any existing safety requirements (such as EN 60204-1 or ANSI/NFPA 79 for industrial machinery). Consider installing a protective guard to prevent inadvertent actuation and verify the electrical ratings match the load type (resistive, motor, or lamp) to ensure contact longevity. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical integration notes that go beyond the manufacturer datasheet to help engineers select, source, and integrate the LM514-N3 foot switch into industrial control systems.
MEC0252V1-000U-A99 - 24V 120mm Vapo-Bearing DC Fan | Sunon
The Sunon MEC0252V1-000U-A99 is a 24 VDC brushless axial cooling fan measuring 120 mm square by 25 mm deep, with a Vapo-Bearing motor, two-wire leads, and auto-restart operation. It delivers 108.2 CFM (3.03 m³/min) airflow and up to 0.28 inches of water static pressure, making it suitable for enclosure cooling and forced-air thermal management. An axial DC fan is an air-moving device that creates pressure and airflow along its rotational axis. In thermal-management systems, it belongs to the hierarchy of cooling equipment: fan -> axial fan -> DC brushless fan -> electronic thermal-management component. Unlike a centrifugal blower, this square axial fan moves air through the fan face and is designed for mounting against a panel, grille, or equipment opening. The MEC0252V1-000U-A99 combines a compact 120 x 120 x 25 mm format with 24 VDC operation and Vapo-Bearing technology. Its two-wire configuration is intended for basic power connection without tachometer or PWM speed-control feedback. The auto-restart feature supports recovery after a stalled or obstructed rotor condition, helping maintain cooling protection in industrial and commercial equipment. The fan is specified at 108.2 CFM airflow and 0.28 inches H2O static pressure according to distributor listings. Sunon performance testing is described using an exhaust method with a double chamber in accordance with AMCA 210 or DIN 24163. These test conditions help engineers compare fan curves, although system resistance and airflow direction should still be verified in the final mechanical design. Typical uses include control-panel ventilation, power supplies, industrial equipment cabinets, test equipment, and electronics enclosures. The 24 V supply is common in industrial systems, telecom equipment, and embedded electronics. The two-wire lead arrangement simplifies installation, but applications requiring fan-speed monitoring or variable-speed control should choose a model with tachometer or PWM leads. Mechanical fit, airflow direction, connector details, and operating limits must be checked against the applicable Sunon datasheet before production. In particular, verify the exact mounting-hole pattern and confirm that the enclosure can accept the fan’s 25 mm depth and airflow direction. For design support, compare airflow at the actual system pressure rather than using free-air CFM alone. This page consolidates verified distributor specifications, application context, and engineering selection considerations for the MEC0252V1-000U-A99. It is intended to help engineers identify whether this 24 V, 120 mm Vapo-Bearing fan is suitable for a given thermal-management design and to locate the authoritative manufacturer documentation.
MRHQ25C-180S-M9PVSDPC-M9PS - 25mm Rotary Gripper, 180° | SMC
The SMC MRHQ25C-180S-M9PVSDPC-M9PS is a 25 mm-bore rotary gripper from the MRHQ Series that integrates a parallel 2-finger gripper with a 180° rotary actuator in a single compact body, eliminating the separate rotary table + adapter + air gripper stack used in older transfer-line designs. The unit ships with two M9PVSDPC solid-state auto-switches on the gripper fingers and one M9PS switch on the rotary axis, all pre-wired and configured for in-line PLC monitoring. Its 20% shorter axial length compared with the previous SMC generation reduces machine footprint on reversing stations. What is a rotary gripper? A rotary gripper is a pneumatically actuated end-effector that combines finger clamping and wrist rotation in one mechanism. In the broader automation taxonomy it sits below pneumatic gripper (a category of motion-control actuator) and above simple parallel air grippers; by merging rotation into the same housing, it removes external hoses, fittings, and timing-skew between the two motions, simplifying PLC ladder logic. Key differentiating features of the MRHQ25C-180S include a 25 mm bore giving a gripping force suitable for small- to medium-sized workpieces, a 180° rotation angle that reverses part orientation without a separate flip station, integrated M9P-series solid-state auto-switches with PNP / NPN options pre-selected at order code, and a hardened jaw guide for repeatable positioning under high-cycle transfer-line duty. Repeatability is specified at the sub-millimeter level because the rotary axis is mechanically locked after actuation. Technically the MRHQ25C-180S uses a dual-piston rack-and-pinion drive: one piston drives the parallel jaws through a mechanical linkage, and a second concentric piston rotates the output flange through 180°. The compact integration eliminates peripheral piping of the previous rotary table + adapter + air gripper combination, while the M9PVSDPC (gripper-finger) and M9PS (rotary-axis) switches give PLC feedback without extra wiring harnesses. Typical applications include part-reversing on transfer lines, machine tending of small turned or stamped components, robotic pick-and-place cells feeding CNC or assembly stations, and end-of-arm tooling on collaborative robots where one EOAT must both grip and reorient the part before placement. The 180° rotation also suits indexing fixtures in electronics assembly and inspection cells. When designing with the MRHQ25C-180S, confirm operating pressure (typically 0.2 to 0.7 MPa for SMC MRHQ), select air-preparation (FRL) upstream to protect seals, and route the three switch cables away from moving harnesses. Always verify jaw stroke and gripping-force margin against the heaviest workpiece in the mix, and use a soft-start valve if cycle rates are above 60 cpm to avoid water-hammer damage. This page synthesizes distributor pricing, drop-in same-series alternatives, and pneumatic-system design notes not found in the standalone SMC catalog PDF, enabling faster component selection for transfer-line engineers.
NCS-5001-FN-BK - NCS 5001 Fan Tray Back-to-Front | Cisco
The Cisco NCS-5001-FN-BK is a fan tray (fan module) for the Cisco Network Convergence System 5001 router, providing back-to-front airflow cooling in the NCS 5000 Series 1 RU dense 10/100 Gigabit Ethernet aggregation platform. It is a field-replaceable unit (FRU) designed specifically for the NCS 5001 chassis. A fan tray is a cooling subsystem within the network equipment hierarchy: cooling assembly -> thermal management FRU -> router hardware -> access/aggregation routing platform. Its role is to force air through the chassis so line-card CPUs, NPUs, PHYs, and power components stay within their rated junction temperatures, sustaining continuous service-provider operation. Key characteristics include the back-to-front airflow direction (denoted by the BK suffix), hot-swap serviceability, and native integration with the NCS 5001 chassis environmental monitoring, which reports fan speed and thermal status to Cisco IOS XR Software. Because the tray matches the chassis airflow scheme, mixed airflow deployments must be avoided to prevent recirculation hotspots. The NCS 5001 and NCS 5002 are small form-factor dense GE/10GE aggregation systems powered by Cisco IOS XR, offering telemetry, machine-to-machine interfaces, and third-party application hosting. In such high-density systems, the fan tray is a critical reliability component; according to the Cisco NCS 5000 Hardware Installation Guide, the fan tray is designed to be removed and replaced while the system is operating without causing electrical hazard or damage if replacement is performed within five minutes. Typical applications include service provider access and aggregation networks, MPLS-enabled data center interconnect, and high-bandwidth mobile, video, and cloud service delivery using the NCS 5001 chassis. Design and procurement consideration: confirm the airflow direction of your chassis before ordering - the BK (back-to-front) version must not be mixed with front-to-back versions in the same or adjacent racks. This page synthesizes distributor pricing, airflow-direction variants, and practical replacement guidance not found in a single Cisco document, giving procurement and network engineering teams a consolidated source.
NCS-5001-FN-FR - NCS 5001 Fan, Front-to-Back Airflow | Cisco
The Cisco NCS-5001-FN-FR is a front-to-back airflow fan unit designed as the field-replaceable cooling module for the Cisco Network Convergence System 5001 (NCS 5001) router. It is a 1RU chassis fan assembly that mounts in the NCS 5001 dense 10/100 Gigabit Ethernet aggregation router, moving air from the front of the chassis to the back to dissipate heat generated by the NPU, forwarding ASICs, and power supply under full line-rate traffic. The trailing '=' spare SKU (NCS-5001-FN-FR=) is the orderable spare-part configuration, and the -RF suffix designates Cisco Remanufactured stock. A chassis fan module is an electromechanical thermal-management subsystem within the broader network hardware hierarchy: fan assembly -> thermal management subsystem -> network router -> service provider aggregation platform. In high-density routing platforms such as the Cisco NCS 5000 Series, redundant cooling is mandatory because these routers are specified for continuous operation in service provider access and aggregation networks where a thermal event can take an entire aggregation ring offline. Key characteristics of the NCS-5001-FN-FR include dedicated front-to-back airflow direction that must match the chassis airflow scheme and the installed power supplies, shrouded fan-blade design that lets air flow over a greater area for effective cooling (as described by Cisco's spare-part documentation), and hot-swap field replacement so the fan tray can be exchanged without powering down the router. The unit weighs approximately 2.15 lbs (0.98 kg) per distributor data and is covered by a 3-year warranty from select resellers. Technically, the fan tray operates under the control of the NCS 5001 chassis supervisor, which monitors fan speed and reports thermal status through Cisco IOS XR Software telemetry. Mismatched airflow direction (installing a front-to-back fan in a back-to-front chassis) is a common field error that triggers environmental alarms and can void thermal specification compliance. Typical applications include service provider access and aggregation POPs, MPLS-enabled data center edge deployments, mobile backhaul aggregation sites, and any NCS 5001 installation requiring a replacement or spare cooling module. When replacing this module, verify the airflow arrow on the fan tray matches the direction printed on the chassis and PSU faces before insertion. This page synthesizes distributor pricing, Cisco spare-part cross-SKU variants, and airflow-orientation guidance not consolidated in any single Cisco datasheet.
NIS6150MT1TXG - 5V, 1A eFuse Protection IC | onsemi
The onsemi NIS6150MT1TXG is a +5 Volt electronic fuse (eFuse) protection IC with integrated current regulation limited to 1 A, housed in a 10-pin WDFNW (3x3 mm) package. An electronic fuse, or eFuse, is a resettable circuit-protection device that combines the overcurrent function of a traditional fuse with the controllability of a power switch. Unlike a one-time fuse that must be physically replaced after a fault, an eFuse IC monitors load current, disconnects the rail during overcurrent or thermal fault conditions, and can automatically retry or latch off, protecting both the power source and the downstream load. eFuses sit within the power-management IC hierarchy alongside hot-swap controllers and load switches, and are commonly placed between a supply rail and sensitive loads such as USB ports. The NIS6150 is specifically positioned by onsemi as a cost-effective, resettable fuse that greatly enhances the reliability of USB applications against both catastrophic and shutdown failure modes. Key advantages over discrete PTC/polyfuse solutions include a precisely defined 1 A current-limit threshold, fast electronic response to faults, low on-resistance, and controlled fault behavior that a passive PTC thermistor cannot match. Technically, the device integrates a current-sense element, control logic, and a power pass device in a single monolithic die. During an overcurrent event, the NIS6150 regulates the load current rather than abruptly opening, which limits voltage transients on the rail and reduces stress on downstream components. Thermal protection prevents the die from exceeding safe junction temperatures during sustained fault conditions. Typical applications include USB port power protection on host hubs and peripherals, 5 V auxiliary rail protection in set-top boxes, monitors, and consumer electronics, and general-purpose hot-plug protection where inrush and short-circuit events must be tolerated without board damage. When designing with the NIS6150, verify the continuous load current against the 1 A limit, and provide adequate PCB copper area on the WDFNW package exposed pad for heat dissipation during fault events. A small output capacitance per the onsemi datasheet recommendations ensures stability during transient loads. This page synthesizes distributor pricing, verified datasheet data, and practical eFuse design guidance not consolidated on standard distributor catalog pages.
NIS6150MT2TXG - 5V 1A eFuse USB Protection | onsemi
The onsemi NIS6150MT2TXG is a +5 Volt electronic eFuse (resettable electronic fuse) rated for 1 A of continuous current, housed in a compact 10-pin WDFNW (3x3 mm) surface-mount package. It protects USB and low-voltage power distribution circuits from catastrophic overcurrent, overvoltage, and shutdown failures while remaining fully auto-resettable. An electronic fuse (eFuse) is a semiconductor-based circuit protection device that replaces traditional polymeric PTC fuses and discrete protection circuitry. Sitting within the power management IC hierarchy (eFuse -> circuit protection IC -> power management IC), an eFuse monitors load current in real time and disconnects the load within microseconds when a fault is detected, then automatically reconnects once the fault clears - eliminating field service and manual reset. Key features of the NIS6150 include its resettable fuse behavior, which greatly enhances reliability in USB applications from both catastrophic and shutdown failures; a precise 5 V operating rail targeted directly at USB power distribution; a 1 A current rating suitable for standard USB loads; and a compact 3x3 mm WDFN package that conserves board area in portable designs. Compared with a polymer PTC fuse, the eFuse offers faster trip response, tighter current regulation tolerance, and lower voltage drop. Technically, the NIS6150 integrates a current-sensing element, a control FET, and the protection logic in a single monolithic die. On an overcurrent event it enters a current-limited or latched state (per the manufacturer datasheet) rather than relying on thermal heating of a polymer element, giving predictable, repeatable trip behavior across temperature. Typical applications include USB port power protection in hubs, chargers, and host peripherals; hot-swap supply rails in set-top boxes and monitors; and general 5 V rail protection in consumer, industrial, and automotive electronic control units. When designing with this device, verify the maximum fault current capability and follow the datasheet decoupling guidance - place the input and output capacitors close to the IN and OUT pins to keep transient voltage excursions within limits during a fast trip event. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing freshness stated as of 2026-09-14.
PVA1352NSPBF - 100V 375mA SPST-NO Photo-Coupled Relay | Infineon
The Infineon PVA1352NSPBF is a 100 V, 375 mA single-pole normally-open solid-state photovoltaic relay (PVR) housed in an 8-pin modified SMT package with 4 leads and a 4 kV input-to-output isolation barrier. The part is manufactured by Infineon (originally International Rectifier, now part of Infineon) and is qualified to switch analog signals up to 100 V AC/DC with a typical on-state resistance of 5 ohm. The photovoltaic relay uses a stack of photo-voltaic cells to generate an isolated gate drive for two back-to-back HEXFET power MOSFETs, providing a true SPST-NO 1 Form A contact without moving parts. A Photovoltaic Relay (PVR) is a solid-state relay that uses light from an input-side LED to charge a photovoltaic gate-driver array, which in turn drives the gates of one or more MOSFET output switches. Compared with electromechanical relays, PVRs offer unlimited dry-circuit switching, bounce-free operation, very low off-state leakage, and immunity to shock and vibration. PVRs sit in the solid-state relay hierarchy alongside photo-triac couplers and reed relays, but excel at low-level DC and AC analog switching where reed relays would otherwise be required. Key features of the PVA1352NSPBF include 1.0 ohm (typical) on-resistance, 375 mA continuous load current, 100 V maximum load voltage, 4 kV RMS I/O isolation, 5 mA typical LED trigger current, 25 mA absolute maximum LED forward current, and 125 us turn-on / 150 us turn-off typical switching times. The 8-SMD footprint (0.300 inch / 7.62 mm pitch, 4 active leads) is JEDEC-registered and pin-compatible with the broader PVA13xx family. Internally, the device stacks multiple photovoltaic cells in series so that the open-circuit voltage generated by the LED bias is sufficient to enhancement-mode the dual HEXFET output switches. Because there is no charge pump or DC-DC converter, the output is purely level-sensitive and exhibits no charge-pump-induced offset or audible noise. The bidirectional AC/DC capability comes from the two MOSFETs wired in a back-to-back source configuration, which blocks both positive and negative load voltages. Typical applications include automatic test equipment (ATE) reed-relay replacement, instrumentation multiplexing, process control analog switching, medical patient-isolation analog signal routing, and telecom line-card signal switching. The low on-resistance and high isolation also suit precision data-acquisition front-ends and low-distortion audio signal routing. When designing with this part, ensure the LED is driven with a current-limited source between 5 mA and 25 mA. The photovoltaic gate stack requires continuous LED current to remain in the on state - pulsed drive is not supported. Bypass the output with a TVS or snubber if the load is highly inductive to limit dv/dt-induced drain voltage transients. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
PVAZ172NSPBF - 60V 1A Photo-Voltaic SSR Relay | Infineon
Infineon PVAZ172NSPBF is a 60 V, 1 A single-pole normally-open solid-state photovoltaic relay (Photorelay) in an 8-pin modified SMT package, designed as a drop-in replacement for electromechanical relays used in general-purpose AC and DC switching. This optically-coupled, MOSFET-output device isolates the low-voltage control input from the load side using a built-in photovoltaic driver that generates the gate voltage for two back-to-back MOSFETs, delivering 0.5 ohm on-state resistance, 4 kVrms input-to-output isolation, and 25 mA typical forward LED drive current. A solid-state relay (SSR) is a semiconductor switching device that uses an optically-coupled or magnetically-coupled isolation barrier to control a load without moving parts. Photovoltaic relays are a subtype that generate a floating gate-drive voltage internally from the LED input, allowing direct switching of isolated DC and AC loads without an external bias supply. They sit in the broader electromechanical hierarchy of relays and are classified under Power Management and Electromechanical > Relays in distributor catalogs. Photovoltaic relays trade the long life and silent operation of MOSFET-only SSRs for higher current capability than typical phototriac SSRs. Key features of the PVAZ172NSPBF include 60 V load voltage maximum (AC or DC), 1 A continuous load current, 0.5 ohm maximum on-state resistance, 4 kVrms I/O isolation voltage, 25 mA nominal LED forward current, and SPST-NO (1 Form A) contact configuration. The 8-SMD modified package (0.300 inch, 7.62 mm body, 4 leads) simplifies PCB layout and provides high isolation in a compact footprint. At the circuit level, the device integrates an AlGaAs infrared LED optically coupled to a photovoltaic generator that drives the gates of two series MOSFETs. When the LED is biased, the photogenerated voltage exceeds the MOSFET threshold and turns the output on with no moving parts, eliminating contact bounce and arcing. Typical applications include industrial control modules, programmable logic controller (PLC) outputs, battery monitoring systems, and instrumentation multiplexers. The wide load-voltage range supports both 24 V DC industrial rails and 48 V AC telecom signal lines, while the high isolation protects low-voltage microcontrollers from transients on the field side. Design tip: provide adequate PCB creepage between the input pins (1-4) and the output pins (5-8) to preserve the rated 4 kV isolation in production boards, and add an RC snubber across inductive loads to limit dv/dt-induced false turn-on. This page synthesizes distributor pricing, drop-in alternatives in the same 8-SMD package, and practical design notes not found in the manufacturer datasheet alone.
PVDZ172NSPBF - 60V 1.5A Photovoltaic Solid-State Relay | Infineon
The Infineon PVDZ172NSPBF is a 60 V, 1.5 A DC single-pole normally-open photovoltaic solid-state relay (SSR) housed in an 8-pin modified SMT (0.300 inch / 7.62 mm gull-wing) package. The part is a HEXFET Power MOSFET output photovoltaic relay that optically couples an LED driver to a MOSFET output stack, providing bounce-free switching of DC loads up to 60 V at 1.5 A continuous current. It is lead-free (Pb-free suffix "PBF") and qualified as an SPST-NO (1 Form A) device suitable for replacing electromechanical and reed relays. A photovoltaic solid-state relay is a semiconductor switch whose input (an infrared LED) generates a photovoltaic voltage via an optically-coupled stack of photodiodes, which in turn drives the gates of one or more power MOSFETs on the output side. This topology provides galvanic isolation (typically several kV), infinite mechanical life, no contact bounce, insensitivity to shock, vibration and external magnetic fields, and silent operation. Compared with electromechanical relays, photovoltaic MOSFET SSRs switch much faster (microseconds vs. milliseconds), draw zero holding current in the output stage, and generate no EMI from contact arcing. Key features of the PVDZ172NSPBF include a 60 V maximum load voltage, 1.5 A continuous load current (DC), low on-resistance (RDS(on)) HEXFET output MOSFETs in a back-to-back or single-MOSFET configuration, optical isolation between input and output, and solid-state reliability (no moving parts, no contact wear). The modified 8-pin SMT package provides a standard 0.300-inch row spacing for drop-in PCB compatibility with traditional PCB-mount relay footprints, and the gull-wing leads simplify surface-mount assembly and inspection. The part is intended for general-purpose DC switching, including replacing electromechanical relays in industrial control, instrumentation, security, automotive and battery-powered systems. Designers choose photovoltaic SSRs when they need silent, bounce-free operation, long operational life (>10^9 cycles), resistance to shock/vibration/magnetic fields, or when they need to switch low-level signals without contaminating them with mechanical contact noise. Typical applications include: industrial control PLCs and I/O modules, battery management systems (BMS), test and measurement equipment, security and alarm systems, automotive ECU signal switching, medical instrument switching, audio equipment muting circuits, and any general-purpose DC load switching where a traditional reed or electromechanical relay would previously have been specified. The PVDZ172NSPBF is one of the lower-voltage members of Infineon's photovoltaic relay family; for higher load voltages (e.g. 100 V, 200 V, 400 V, 600 V) other members of the PVDZ family should be selected. Design consideration: ensure that the input LED is driven within its specified forward current range (typically 5-25 mA through an external current-limiting resistor); under-driving the LED will not generate sufficient photovoltaic voltage to fully enhance the output MOSFETs, leading to high RDS(on) and self-heating. Likewise, add a snubber or TVS across the output if the load is inductive (solenoid, relay coil, motor) to protect against inductive kickback that can exceed the 60 V rating. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.