Circuitos Integrados

PIC16C74AT-10E/PQ

PIC16C74AT-10E/PQ - 8-Bit 10MHz 7KB OTP MCU 44-QFP | Microchip

The Microchip Technology PIC16C74AT-10E/PQ is a high-performance 8-bit CMOS RISC microcontroller in the PIC16CXX mid-range family, featuring 7KB (4K x 14) of One-Time-Programmable (OTP) program memory, 192 bytes of user RAM, and 33 programmable digital I/O lines, all housed in a 44-pin QFP (MQFP) package. The device integrates an 8-channel 8-bit Analog-to-Digital Converter (ADC), two Capture/Compare/PWM (CCP) modules, a Universal Synchronous/Asynchronous Receiver/Transmitter (USART), and a Synchronous Serial Port (SSP) supporting SPI and I2C, with a maximum clock frequency of 10 MHz delivering 5 MIPS of processing throughput. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (ROM/OTP/Flash), data RAM, I/O peripherals, and timers onto one silicon die. The PIC16C74AT belongs to the PIC16C7X sub-family, which is part of Microchip's mid-range PICmicro architecture that uses a 14-bit instruction word and Harvard-style separate program/data buses. Compared with 4-bit or 16-bit alternatives, 8-bit MCUs remain the workhorse for cost-sensitive embedded control in industrial and automotive subsystems, and they sit within the broader semiconductor hierarchy of microcontrollers > microprocessors > integrated circuits. The PIC16C74AT-10E/PQ features an operating voltage range of 4.0 V to 6.0 V, brown-out reset (BOR) circuitry, a watchdog timer with its own on-chip RC oscillator, an 8 x 8 hardware multiply, and four oscillator start-up timer options. The integrated ADC supports eight analog input channels with 8-bit resolution, suitable for sensor interfacing. Its three timer modules (Timer0, Timer1, Timer2) plus two CCP modules provide flexible event timing and PWM generation for motor and lighting control. Typical applications for the PIC16C74AT-10E/PQ include industrial process controllers, automotive body and chassis ECUs, smart sensor signal conditioning nodes, HVAC control boards, and white-goods appliance controllers. The wide I/O count (33) and integrated peripherals make it well-suited for multi-channel data-acquisition designs where cost per I/O matters more than raw CPU throughput. Engineers designing replacement boards for legacy systems particularly favor this part because the PIC16C7X instruction set and toolchain are well-documented and supported by MPLAB IDE. When selecting this part, note the automotive "E" temperature grade (-40 C to +125 C) and 10 MHz speed grade: the 10 MHz part is the lower-speed variant of the PIC16C74A family (which also has a 20 MHz option). The -E/PQ suffix decodes to Enhanced (extended) temp grade, PQ = 44-pin Metric Quad Flat Pack. Because this is an OTP (one-time-programmable) part, firmware must be fully verified before programming; consider the PIC16F74A flash equivalent if in-field reprogrammability is required.

Cotação Contato

PIC16C74AT-10E/PT

PIC16C74AT-10E/PT - 8-Bit 10MHz 7KB OTP MCU | Microchip

The Microchip Technology PIC16C74AT-10E/PT is an 8-bit CMOS RISC microcontroller from the PIC16C7X mid-range family, delivering 10 MIPS performance from a 10MHz oscillator and housed in a 44-pin TQFP (10x10 mm) package. It integrates 7KB (4K x 14) of One-Time Programmable (OTP) program memory, 192 bytes of RAM, and 33 digital I/O pins, making it a drop-in member of the PIC16C74A family. Background: The PIC16C family is a classic mid-range 8-bit RISC microcontroller architecture from Microchip Technology (originally Microchip Technology / General Instrument). An OTP microcontroller is a flash-less variant in which the program memory can be written exactly once by the user, typically using an external device programmer. Compared to flash-based MCUs, OTP parts offer lower unit cost, smaller die area, and stronger bit stability, which is why they remain common in high-volume appliance, automotive, and industrial control applications. Key features include a 14-bit instruction word, 8-level deep hardware stack, integrated 8-channel 8-bit A/D converter, two 8-bit and one 16-bit timer/counter modules, a Universal Synchronous Asynchronous Receiver Transmitter (USART), a Synchronous Serial Port (SSP), and capture/compare/PWM (CCP) peripherals. The device operates from 4.0V to 6.0V and supports a -40C to +125C extended temperature range, indicated by the "E" temperature designator in the part number. The PIC16C74A core uses a Harvard architecture with separate program and data buses, allowing instruction fetch and operand read to occur in a single 200ns instruction cycle (at 20MHz, equivalent to 10MHz oscillator/4). This dual-pipeline structure gives the PIC16C74AT-10E a 200ns instruction cycle and deterministic interrupt latency, which is essential for closed-loop control loops and motor drive timing. Typical applications include industrial process control, HVAC thermostat and sensor interfacing, motor drive BLDC/PMSM auxiliary logic, automotive body electronics (cluster, lighting, window lift), white-goods user-interface boards, and general-purpose embedded control. The "-10E" suffix denotes 10MHz max oscillator frequency and the extended temperature grade, while "T" indicates tape-and-reel packaging and "/PT" indicates the 44-pin TQFP. When designing with this part, note that OTP memory requires device programmers for code loading - in-circuit programming via ICSP is not supported on C-series OTP parts. Plan for a single revision code image in production or select the PIC16F74A flash counterpart if field re-programmability is required. This page synthesizes Microchip and distributor data, drop-in alternatives in the 44-TQFP footprint, and design notes not consolidated in the manufacturer datasheet.

Cotação Contato

PIC16C74AT-10I/L

PIC16C74AT-10I/L - 8-bit OTP MCU 7KB 192 RAM 33 I/O | Microchip

The Microchip Technology PIC16C74AT-10I/L is an 8-bit PIC16C-family CMOS RISC microcontroller in a 44-pin PLCC (J-lead) package, supplied on tape and reel. It integrates 7 KB of one-time-programmable (OTP) program memory (4K x 14), 192 bytes of SRAM, 33 digital I/O pins, and runs at a maximum clock rate of 10 MHz. It operates from 4 V to 6 V and is offered in the -40 C to +85 C industrial temperature grade. What is an 8-bit OTP microcontroller? It is a single-chip microcomputer built around an 8-bit data path that executes instructions stored in one-time-programmable non-volatile memory. OTP means the program memory can be written once at production time and is then permanently retained, making these parts a cost-effective choice for high-volume, fixed-function embedded products. Within the broader component taxonomy, this part belongs to microcontroller -> 8-bit MCU -> PIC16 family -> mid-range MCU -> CMOS RISC processor -> semiconductor IC. Key features of the PIC16C74AT-10I/L include the PIC16C mid-range Harvard RISC core with a 14-bit instruction word, an integrated analog-to-digital converter (per the PIC16C7X family definition), multiple timers, a USART, and synchronous/Asynchronous serial port support. The 33 I/O pins can source/sink up to 25 mA per pin, enabling direct drive of LEDs and small relays. The 44-PLCC package is a J-leaded surface-mount format with a 16.59 x 16.59 mm body. Technically, the PIC16C7X family uses a two-stage pipeline, single-cycle instruction execution (excluding branches), and a hardware multiplier-free ALU, which simplifies instruction decoding and keeps dynamic current low. The 192-byte RAM is shared with a 16-deep hardware stack and Special Function Registers (SFRs), and the 7 KB OTP supports in-system programming via Microchip's standard ICSP protocol. Typical applications include industrial automation controllers, automotive body and chassis subsystems, appliance control boards, instrumentation front-ends, and consumer electronics embedded control. The wide operating voltage (4 V to 6 V) and industrial temperature range make it well-suited for harsh-environment embedded designs. When designing with this part, note that OTP memory cannot be erased; prototypes should use the windowed (JW) or flash-based (PIC16F) equivalent. Plan firmware revisions accordingly, and allocate the 33 I/Os against the requirements of the application early in the design. This page synthesizes real distributor pricing, verified drop-in alternatives, and practical design notes that the bare datasheet does not surface in one place.

Cotação Contato

PIC16C74AT-10I/PQ

PIC16C74AT-10I/PQ - 8-Bit 10MHz 7KB OTP MCU | Microchip Technology

The Microchip Technology PIC16C74AT-10I/PQ is a member of the PIC16C7X family of low-cost, high-performance CMOS fully-static 8-bit microcontrollers fabricated in OTP (One-Time-Programmable) technology with 7KB (4K x 14) of program memory. The device operates at 10MHz and is housed in a 44-pin MQFP (PQ) plastic package measuring 10x10 mm, with 192 bytes of RAM and 33 digital I/O pins. The "I" suffix indicates the industrial temperature grade range of -40C to +85C, and the "T" suffix indicates tape-and-reel packaging for SMT assembly. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data RAM, and peripheral interfaces on one IC. The PIC16C7X mid-range family sits in the PIC16/17 RISC architecture taxonomy (PIC -> microcontroller -> 8-bit MCU -> embedded controller) and uses a 14-bit instruction word to deliver deterministic single-cycle execution on most instructions, balancing code density against performance for embedded control tasks. Key features of the PIC16C74AT-10I/PQ include five 8-bit I/O ports (PORTA-PORTE) providing 33 bidirectional digital I/O lines, three timer/counter modules for event timing and PWM generation, two capture/compare/PWM (CCP) modules, an 8-channel 8-bit analog-to-digital converter (ADC), a USART serial port with addressable 9-bit mode, and a synchronous serial port (SSP) supporting SPI and I2C master/slave modes. The interrupt controller supports 15 sources including external RB0/INT, peripheral interrupts, and a 16-bit/8-bit/1-bit timer overflow chain. The PIC16C74A uses a Harvard architecture with separate program and data buses, a 2-stage pipeline, and 4MHz internal oscillator option with selectable oscillator modes (RC, XT, HS, LP) to trade off power versus frequency. Brown-out reset and a watchdog timer with on-chip RC oscillator are integrated for automotive-grade robustness in industrial and consumer applications. Typical applications include industrial process control, instrumentation, motor control, sensor interfacing, and consumer appliances requiring multi-channel ADC sampling with serial communications. The device also targets instrumentation data loggers and HVAC controllers. When designing with this MCU, allocate ample decoupling (100nF + 10uF bulk) close to VDD/AVDD/VSS and configure the configuration bits (oscillator, watchdog, brown-out) before code execution begins to prevent unintended reset states.

Cotação Contato

PIC16C74AT-10I/PT

PIC16C74AT-10I/PT - 8-bit OTP MCU, 7KB, 33 I/O | Microchip

The Microchip Technology PIC16C74AT-10I/PT is an 8-bit EPROM/OTP-based CMOS microcontroller with 7KB of program memory and 192 bytes of RAM, housed in a 44-pin TQFP package. It belongs to the PIC16C7X mid-range family and operates from a 4V to 6V supply at up to 10 MHz instruction rate, delivering 5 MIPS performance. The part offers 33 digital I/O pins, an integrated multi-channel Analog-to-Digital Converter, USART, MSSP (SPI/I2C), and two CCP modules, all on a RISC architecture with only 35 single-word instructions. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory, working RAM, and integrated peripherals such as timers, communication interfaces, and analog-to-digital converters. The PIC16C7X family sits within Microchip's mid-range 8-bit line, which evolved from the original PIC16C baseline. PIC microcontrollers are widely used in embedded control because of their deterministic instruction set, low power consumption, and ease of programming through Microchip's MPLAB X toolchain and the familiar PICkit and ICD programmers. Key features of the PIC16C74AT-10I/PT include its 7KB one-time-programmable (OTP) program memory allowing prototype and small-volume production runs without an EEPROM/Flash step, 192 bytes of data RAM, 33 I/O pins arranged across multiple ports, an integrated ADC, and USART plus MSSP for asynchronous serial and SPI/I2C synchronous communications. Two Capture/Compare/PWM modules are included for timing and motor-control tasks, while 8K x 14-bit instruction-word width makes the part code-efficient for mid-range control applications. The industrial temperature grade (-40C to +85C) and TQFP-44 surface-mount package support compact, factory-floor designs. Architecturally, the PIC16C74A uses a Harvard RISC core with separate program and data buses, an 8-level deep hardware stack, and direct, indirect, and relative addressing modes. The ADC is a successive-approximation 8-bit converter with multiple input channels multiplexed onto the I/O pins. The IC operates fully statically, meaning the clock can be stopped without losing register state, enabling low-power sleep modes useful for battery-backed or polled sensor designs. Typical applications include industrial automation and motor-control boards, automotive body and HVAC subsystems (for equivalent Flash parts in the PIC16F family), consumer appliance controls such as washing machines and microwave ovens, and embedded instrumentation requiring UART or I2C communication with analog sensing. In all these roles, the PIC16C74A's combination of ADC, PWM, and serial peripherals reduces external component count. When designing with this part, note that OTP memory requires windowed/UV-erase or one-time programming; for in-system reprogrammability, consider Flash-based siblings in the PIC16F74 family with the same pinout. Always place a 0.1uF decoupling capacitor close to VDD and a bulk capacitor near the analog AVdd pin to keep ADC readings clean. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotação Contato

PIC16C74AT-20/PQ

PIC16C74AT-20/PQ - 8-Bit 20MHz MCU, 7KB OTP, 44-MQFP | Microchip

The Microchip PIC16C74AT-20/PQ is an 8-bit CMOS RISC microcontroller from the PIC16C7X mid-range family, offering 20 MHz maximum operating frequency, 7 KB (4K x 14) of One-Time Programmable (OTP) program memory, and 192 bytes of RAM in a 44-pin Metric MQFP (PQ) surface-mount package supplied on Tape & Reel. It integrates an 8-channel, 8-bit A/D converter, three timer modules, two capture/compare/PWM modules, a synchronous serial port (SSP) configurable as SPI or I2C, a USART with on-chip baud-rate generator, a parallel slave port, and up to 33 digital I/O lines. What is a PIC16C7X mid-range microcontroller? The PIC16C7X family is a group of low-cost, high-performance, CMOS, fully-static 8-bit microcontrollers built on Microchip's enhanced mid-range RISC core. They sit within the broader PIC16CXX mid-range architecture family, which itself belongs to the PICmicro family of microcontrollers, and ultimately the 8-bit microcontroller category. The mid-range architecture provides 35 single-cycle instructions, a 14-bit instruction word, a hardware multiplier, and integrated analog peripherals that make these MCUs a popular choice for embedded control applications requiring deterministic timing and mixed-signal I/O. Key differentiating features of the PIC16C74AT-20/PQ include its commercial temperature grade (0 °C to +70 °C), 20 MHz clock input that delivers up to 5 MIPS throughput, an integrated brown-out reset (BOR) circuit, a watchdog timer with its own on-chip RC oscillator, and a programmable code-protection mechanism. The 'T' suffix indicates Tape & Reel packaging, and the '/PQ' suffix denotes the 44-pin Metric Quad Flat Pack (MQFP) package at 10 x 10 mm body size. The OTP memory variant supports prototyping and low-volume production where in-system programmability is not required. This device is implemented in a low-power CMOS process with a typical active supply current of approximately 5 mA at 5 V and 20 MHz, plus sub-µA sleep current for battery-friendly standby. It supports 8-bit-wide parallel slave porting for external bus expansion, two analog comparators, and a 256-byte EEPROM data area on most family variants. Compared to flash-based PIC16F7X siblings, the PIC16C74A is OTP-only, making it more cost-effective in mature, code-stable high-volume products. Typical applications for the PIC16C74AT-20/PQ include industrial control systems, automotive body electronics (where similar PIC16C variants are used), HVAC controller boards, security alarm panels, smart sensor hubs, and appliance motor control boards. It also fits low-cost data acquisition front-ends where its on-chip 8-channel ADC simplifies mixed-signal front-end design. A key design consideration for the PIC16C74AT-20/PQ is OTP memory: once programmed, the code cannot be erased or rewritten. Engineers should plan development on a windowed (JW) or flash (F) variant of the same PIC16C74A silicon and migrate to the OTP PIC16C74AT-20/PQ only after firmware is fully validated. Brown-out reset, watchdog timer configuration, and oscillator selection (XT, HS, RC) must be set via configuration fuse bits before programming. This page synthesizes verified distributor pricing from DigiKey, parametric comparison against drop-in same-package alternatives from the PIC16C7X family, lifecycle context (this is an OTP/EOL-family part), and practical PCB layout notes that go beyond the bare datasheet summary, giving engineers a faster procurement and redesign decision.

Cotação Contato

PIC16C74AT-20/PT

PIC16C74AT-20/PT - 8-Bit 20MHz OTP MCU 7KB | Microchip

The Microchip Technology PIC16C74AT-20/PT is an 8-bit EPROM-based (OTP) microcontroller from the PIC16C7X family, operating at up to 20 MHz with 5 MIPS performance in a 44-pin TQFP (10x10 mm) package. It integrates 7 KB (4K x 14) of one-time programmable program memory, 192 bytes of user RAM, and 33 digital I/O lines, and is fabricated on a fully-static CMOS process. Background knowledge: An 8-bit microcontroller (MCU) is a small computer-on-a-chip that combines a CPU, program memory, RAM, and peripherals in a single package. The PIC16C7X family belongs to Microchip's mid-range PIC architecture, sitting between base-line PIC16C5X devices and enhanced PIC17/18 devices. Within the taxonomy MCU -> microcontroller -> embedded processor -> semiconductor, PIC16C7X parts are commonly used for cost-sensitive control applications where deterministic instruction execution and low external component count are priorities. The OTP suffix ('C') denotes EPROM-based one-time programmable memory, which is field-programmable but not electrically erasable, distinguishing it from flash-based PIC16F variants. Key features include an integrated 8-channel, 8-bit analog-to-digital converter, three timer modules, a synchronous serial port (SSP) supporting SPI and I2C, a USART with addressable transmit/receive buffer, a parallel slave port, and a watchdog timer with on-chip RC oscillator. The device operates from 4.0 V to 6.0 V across the commercial 0C to +70C temperature range and supports in-circuit serial programming (ICSP) via two pins. Architecturally, the PIC16C7X employs a 14-bit instruction word with a single accumulator (W) and an 8-level deep hardware stack, allowing 35 single-word instructions and an instruction cycle equal to four oscillator periods. Brown-out reset, power-on reset, and a wide operating voltage range further improve field robustness. The 20 MHz clock delivers 5 MIPS throughput, sufficient for closed-loop control and modest signal-processing tasks. Typical applications include industrial automation controllers, automotive body and accessory modules (non-safety), consumer appliance control boards, sensor signal conditioning, and small motor-control subsystems. The integrated ADC and USART simplify designs that must interface with analog sensors and asynchronous serial buses. When designing with this part, note that the OTP memory cannot be reprogrammed in-circuit; engineering samples should use the windowed (JW) variant for development. Decoupling the VDD/VSS pairs close to the package and following Microchip's recommended oscillator layout are critical for EMI-sensitive environments. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design considerations that extend beyond the manufacturer datasheet to accelerate sourcing and design decisions.

Cotação Contato

PIC16C74AT-20E/PQ

PIC16C74AT-20E/PQ - 8-bit 20MHz OTP MCU 7KB | Microchip

The Microchip Technology PIC16C74AT-20E/PQ is an 8-bit CMOS RISC microcontroller from the PIC16C7X mid-range family, operating at up to 20MHz with 7KB of One-Time Programmable (OTP) program memory organized as 4K x 14 words and 192 bytes of RAM, housed in a 44-pin MQFP (10x10 mm) package. The 'T' suffix denotes tape-and-reel packaging, the '20' indicates the 20MHz maximum clock speed, the 'E' denotes the extended industrial temperature grade (-40C to +125C), and 'PQ' identifies the 44-pin MQFP package. What is a PIC microcontroller? A PIC (Peripheral Interface Controller) microcontroller is a family of low-cost, high-performance, CMOS, fully-static, 8-bit microcontrollers built on a RISC (Reduced Instruction Set Computer) architecture. PIC microcontrollers fall within the broader category of microcontrollers (MCU) which sit inside the integrated circuits > microcontrollers taxonomy. PIC16C-series parts are part of Microchip's mid-range MCU family that integrates on-chip peripherals such as A/D converters, timers, and serial communication interfaces in a single chip, simplifying embedded designs. Key features of the PIC16C74AT-20E/PQ include: integrated 8-channel 8-bit A/D converter, three timers (Timer0, Timer1, Timer2), a capture/compare/PWM (CCP) module, and three serial communication peripherals - I2C, SPI, and USART - enabling flexible connectivity to analog sensors and digital peripherals. The wide operating voltage range of 2.5V to 5.5V supports both 3.3V and 5V system designs, and 33 digital I/O pins provide ample GPIO for typical embedded applications. From an architectural standpoint, the PIC16C7X family uses a Harvard architecture with separate program and data buses, allowing instruction fetch and data access in a single cycle. The 14-bit instruction word enables a rich set of single-cycle operations including bit manipulation, byte arithmetic, and conditional branches. The OTP program memory means firmware is programmed once at production and cannot be erased, which is well-suited for mature, fixed-function products with stable firmware. Typical applications include industrial automation controllers, automotive body and chassis subsystems, motor control boards, sensor interface modules, HVAC controllers, and consumer appliance control boards. The combination of integrated A/D converters and serial interfaces allows designers to replace external glue logic with a single chip. When designing with this part, ensure the oscillator configuration (crystal/RC/HS mode) matches your clock-accuracy requirements. The 'E' extended temperature grade makes it suitable for under-hood automotive and outdoor industrial deployments. Note that OTP memory cannot be re-programmed - use Flash-based PIC16F74 for in-field firmware updates. This page synthesizes verified distributor pricing, drop-in same-package alternatives, MQFP-44 pinout diagrams, and practical design considerations that go beyond what a single manufacturer datasheet provides, helping engineers make informed selection and sourcing decisions for the PIC16C74AT-20E/PQ.

Cotação Contato

PIC16C74AT-20I/L

PIC16C74AT-20I/L - 8-bit 20MHz PIC MCU, 7KB OTP, 44-PLCC | Microchip

The Microchip Technology PIC16C74AT-20I/L is an 8-bit PIC microcontroller built on Microchip's mid-range RISC architecture, offering a 20 MHz maximum operating frequency, 7 KB (4K x 14) of One-Time-Programmable (OTP) program memory, and 192 bytes of RAM, all housed in a 44-pin PLCC package (16.59 x 16.59 mm). What is a PIC 16C microcontroller? PIC 16C devices are members of Microchip's classic mid-range 8-bit microcontroller family, fully static CMOS designs that integrate a RISC CPU core, program memory, data RAM, and a rich set of on-chip peripherals around a unified instruction set. They sit in the broader hierarchy of PIC microcontrollers -> 8-bit microcontrollers -> microcontrollers (MCU) -> microcontrollers and processors -> semiconductors. The "16C" prefix denotes EPROM-based (erasable windowed) program memory, while PIC16F variants use flash; PIC16C parts are typically used where traceability, in-circuit reprogrammability in a windowed package, or long-term reliability validation of the OTP silicon is required. Key features of the PIC16C74AT-20I/L include 33 general-purpose digital I/O pins, an 8-channel 8-bit Analog-to-Digital Converter (ADC), two Capture/Compare/PWM (CCP) modules, an asynchronous/synchronous USART with address masking, a Master Synchronous Serial Port (MSSP) supporting both I2C (Master/Slave) and SPI modes, and a Parallel Slave Port. System integrity features include a Brown-Out Reset (BOR), Power-On Reset (POR), a Watchdog Timer (WDT) with its own on-chip RC oscillator, and dual oscillator options (XT/HS/RC/LP). The "-20I" suffix indicates a 20 MHz speed grade and an industrial temperature range of -40C to +85C. The PIC16C74AT-20I/L uses a Harvard architecture with a separate 14-bit instruction word and 8-bit data path, executing most instructions in a single 200 ns cycle (at 20 MHz). The wide operating voltage range of 4.0 V to 6.0 V supports both 5 V regulated rails and battery-backed systems, while the high sink/source current of 25 mA per I/O pin enables direct LED or relay drive without external buffers. Typical applications include industrial process control, motor control front-ends, instrumentation, automotive body electronics (non-safety), and embedded control in white goods and HVAC subsystems. The on-chip ADC, CCP/PWM and MSSP peripherals make it well suited to closed-loop control systems where deterministic instruction timing and integrated analog simplify the BOM. When designing with this part, confirm that OTP program memory matches the production flow - OTP can be programmed only once and is unsuitable for designs that require firmware updates. Designers targeting long life-cycles should evaluate the flash-based PIC16F74A family or the migration path documented in Microchip device migration guides. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

PIC16C74AT-20I/PQ

PIC16C74AT-20I/PQ - 8-Bit 20MHz OTP MCU, 7KB | Microchip

The Microchip Technology PIC16C74AT-20I/PQ is an 8-bit PIC microcontroller from the PIC16C7X mid-range family, built on a fully-static CMOS process and packaged in a 44-pin MQFP (10x10 mm). It integrates a 20 MHz core, 7 KB of one-time-programmable (OTP) program memory organized as 4K x 14, 192 bytes of RAM, 33 digital I/O lines, and on-chip peripherals including an analog-to-digital converter and synchronous/asynchronous serial interfaces (SSP/USART). The "T" suffix denotes tape-and-reel packaging, "20" indicates the 20 MHz maximum operating frequency, "I" denotes the industrial -40C to +85C temperature grade, and "/PQ" identifies the 44-pin MQFP package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral blocks around a Harvard architecture bus. The PIC16C7X family is the mid-range tier of Microchip's classic PIC line, sitting between the baseline PIC16C5X and the high-performance PIC17C/PIC18C families. PIC MCUs are characterized by their RISC instruction set, single-cycle execution at the oscillator rate, and predictable interrupt latency, which has made them a long-standing choice for embedded control in industrial, automotive, and consumer products. Key features include 13 interrupt sources, a 200 ns instruction cycle at 20 MHz, an 8-level deep hardware stack, and a watchdog timer with its own on-chip RC oscillator for fail-safe recovery. The device supports in-circuit serial programming (ICSP) via RB6/RB7, allowing the OTP memory to be programmed after PCB assembly. The brown-out reset and power-on reset blocks protect the controller during supply transients in harsh industrial environments. The architecture uses a 14-bit instruction word with separate code and data buses, enabling simultaneous instruction fetch and data access for deterministic throughput. The ADC block provides 8 inputs with 8-bit resolution, and the capture/compare/PWM module supports timing-critical motor and power-conversion applications. The 33 I/O pins feature high-current sink/source capability for direct LED and relay drive. Typical applications include industrial control panels, sensor signal conditioning, motor drive interface, embedded instrumentation, and legacy replacement designs migrating from PIC16C5X baselines. The industrial temperature range and OTP memory make it well-suited for cost-sensitive volume production where firmware is finalized at board build time. When designing with this device, remember that OTP memory cannot be re-programmed in the field; for development and low-volume production consider the PIC16F74 flash equivalent. The 44-MQFP package requires careful thermal management at high clock rates, and decoupling capacitors must be placed within 5 mm of the VDD pins per the Microchip datasheet. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotação Contato

PIC16C74AT-20I/PT

PIC16C74AT-20I/PT - 8-Bit 20MHz OTP MCU 7KB | Microchip

The Microchip Technology PIC16C74AT-20I/PT is a member of the PIC16C7X mid-range 8-bit microcontroller family, integrating an 8-channel Analog-to-Digital Converter with 7KB (4K x 14) of One-Time Programmable (OTP) program memory, 192 bytes of user RAM, and a 20MHz maximum operating frequency delivering 5 MIPS of CPU throughput. Housed in a 44-pin TQFP (PT) package (10x10mm body) with the industrial -40C to +85C operating temperature range, the PIC16C74AT-20I/PT provides 33 digital I/O lines, three timer modules, two capture/compare/PWM peripherals, a USART, and the synchronous serial port that defines this family. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, typically integrating a CPU core, program memory (ROM/OTP/Flash), working RAM, and a mix of peripherals (timers, ADC, communication ports, GPIO). PIC microcontrollers from Microchip Technology are RISC-based Harvard-architecture devices with a small instruction set (35 single-word instructions on the mid-range family) that simplifies coding while still offering deterministic real-time performance. PIC16C parts sit in the mid-range PIC taxonomy: PIC10/12/16/18 (8-bit) -> PIC16F/PIC16C mid-range family -> PIC16C7X sub-family (with integrated ADC). This hierarchy matters because selecting within the same family guarantees pinout, peripheral set, and instruction-set compatibility. Key differentiating features include the integrated 8-bit ADC, hardware USART for RS-232/RS-485 links, dual CCP modules for PWM or input-capture timing, and a synchronous serial port that can be configured for SPI or I2C master mode. The OTP memory allows short programming lead time for prototype builds but is single-write only, so engineers should plan migration to a Flash-based PIC16F or PIC18 equivalent for production volumes. At the architectural level the PIC16C74A uses a 14-bit instruction word and separate program/data buses, allowing the CPU to fetch an instruction while simultaneously reading data memory - the canonical Harvard advantage. Power management is handled by selectable oscillator modes (XT, HS, RC, LP) and a power-saving SLEEP state with multiple wake-up sources including the Watchdog Timer. Typical applications include industrial control boards, appliance controllers, automotive body electronics (pre-CAN modules), sensor signal conditioning with on-chip ADC, and small motor-control loops leveraging the CCP/PWM peripherals. The wide industrial temperature range makes the -I grade suitable for factory-floor equipment. When designing with this part, plan OTP programming workflow early - the device cannot be re-programmed and the same silicon is unavailable in Flash. The TQFP-44 footprint is shared with PIC16F874/877 Flash equivalents that are drop-in code-and-pin compatible, easing migration paths. This page synthesizes distributor pricing snapshots, drop-in compatible Microchip alternatives (PIC16C74AT-20I/PQ, PIC16C74AT-20/PT, PIC16C74A-20I/L), and practical design considerations not found in the manufacturer datasheet.

Cotação Contato

PIC16C74B-04/L

PIC16C74B-04/L - 8-Bit OTP MCU 7KB 4MHz 33 I/O PLCC-44 | Microchip

The Microchip Technology PIC16C74B-04/L is an 8-bit CMOS RISC microcontroller in the PIC16CXX mid-range family, supplied in a 44-pin PLCC package with 7KB (4K x 14) of One-Time Programmable (OTP) program memory. It operates from a 4 MHz external clock input (the -04 speed grade), runs an instruction in 200 ns, supports a 4V to 5.5V supply, and exposes 33 digital I/O lines plus 8 channels of 8-bit Analog-to-Digital conversion. An OTP microcontroller is a type of non-volatile programmable logic device whose program memory can be written exactly once after manufacture, retaining its code without power and offering lower per-unit cost than ceramic-windowed UV erasable parts for production runs. The PIC16C74B-04/L sits in the broader taxonomy: microcontroller -> 8-bit MCU -> mid-range RISC MCU -> CMOS embedded controller -> semiconductor, where it bridges simple 8-pin PIC10/12 devices and the 16-bit PIC24/dsPIC families. This positioning explains its adoption in industrial control, automotive body electronics and legacy embedded designs. Key features include 192 bytes of data RAM, two 8-bit timers plus one 16-bit timer, a 5-channel 8-bit A/D converter with brown-out reset and a watchdog timer. The synchronous serial port can be configured as either a 3-wire SPI or 2-wire I2C interface, and a separate USART provides asynchronous serial communication. An 8-level deep hardware stack and 35 single-word RISC instructions reduce code density and ease firmware development for legacy C and assembly projects. The architecture implements a Harvard-style memory map with separate code and data buses, allowing instruction fetch and operand read to occur in a single clock cycle for most instructions. Program branches are two cycles; everything else executes in one cycle. The OTP program memory is implemented as EPROM cells, giving deterministic in-system programming via the standard Microchip ICSP protocol. Brown-out reset, power-on reset and the watchdog timer provide three independent reset sources that harden the device against brown-out and software-stall conditions in unattended equipment. Typical applications include industrial control logic, automotive body and chassis subsystems (pre-CAN era platforms), appliance controllers, security and access-control panels, and legacy communication peripherals requiring USART plus SPI or I2C on the same silicon. The wide 4V-5.5V operating range tolerates unregulated 5V supplies common in industrial cabinets. When designing with this device, plan the OTP programming flow early because the part cannot be reprogrammed in-circuit after the UV window is sealed. Place a 100 nF decoupling capacitor close to VDD and VSS, and reserve the MCLR pin for the standard Microchip ICSP header so production programming and field firmware recovery remain practical. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the standalone PIC16C74B datasheet.

Cotação Contato

PIC16C74B-04/PQ

PIC16C74B-04/PQ - 8-Bit 4MHz OTP MCU 7KB Flash | Microchip

The Microchip PIC16C74B-04/PQ is an 8-bit CMOS OTP (One-Time Programmable) mid-range microcontroller from the PIC16CXX family, operating at 4 MHz instruction execution with 200 ns per instruction cycle. The device integrates 7 KB (4K x 14) of program memory, 192 bytes of RAM, and 33 digital I/O pins in a 44-pin MQFP (10x10 mm) package, targeting embedded control applications that require on-chip peripherals and a wide operating voltage range. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, working RAM, and peripheral interfaces such as timers, A/D converters, and communication ports. Mid-range PIC microcontrollers occupy the middle of Microchip's 8-bit portfolio - more capable than the PIC16C5X baseline family and upward-compatible with PIC12CXXX devices, but predating the PIC18 enhanced family. The 'C' suffix in PIC16Cxx denotes OTP EPROM program memory, suitable for production runs where code stability is finalized but where in-circuit reprogrammability is not required; Flash-based 'F' variants are typically preferred for prototypes and field-updatable designs. Key specifications include 8 channels of 8-bit Analog-to-Digital conversion, two additional 8-bit timers plus Timer0 and Timer1, two Capture/Compare/PWM (CCP) modules, and a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C. A USART (Universal Synchronous/Asynchronous Receiver/Transmitter) provides asynchronous serial communication. The device supports high sink/source current of 25 mA per I/O, low standby current of 1 µA typical at 3V/32 kHz, and 15 µA typical operating current at 5V/4 MHz. Operating voltage spans 2.5V to 6.0V across commercial, industrial, and extended temperature grades. The PIC16C74B architecture uses a Harvard-style RISC core with only 35 single-word instructions, simplifying firmware development and reducing code footprint. Its mid-range peripheral set - particularly the 8-channel ADC and dual CCP - positions it for analog signal acquisition, motor control, and industrial instrumentation. The wide operating voltage and temperature range extend use into automotive under-hood and harsh industrial environments. Typical applications include industrial process control, motor drive interfaces, sensor signal conditioning, power supply monitoring, and embedded data acquisition systems. The 44-pin MQFP footprint suits designs where through-hole PDIP is too large but QFN is unavailable in the OTP memory configuration. When designing with the PIC16C74B-04/PQ, account for OTP memory constraints by finalizing firmware before programming, and consider the Flash-based PIC16F74 as a development substitute since both share the same die and pinout. This page synthesizes distributor pricing, drop-in PIC16C74B variants, and practical design notes not aggregated in any single manufacturer or distributor source.

Cotação Contato

PIC16C74B-04/PT

PIC16C74B-04/PT - 8-Bit CMOS MCU, 4MHz, 7KB EPROM, TQFP-44 | Microchip

The Microchip Technology PIC16C74B-04/PT is an 8-bit CMOS microcontroller built on the PIC16C mid-range RISC architecture, featuring 7 KB of one-time-programmable EPROM program memory, 192 bytes of RAM, and 33 digital I/O lines, all housed in a 44-pin TQFP (PT) surface-mount package. It runs at 4 MHz maximum clock input with a 1 us instruction cycle, operates from 4 V to 5.5 V, and integrates 8 channels of 8-bit Analog-to-Digital conversion, two 8-bit timers plus one 16-bit timer, two Capture/Compare/PWM modules, a synchronous serial port configurable as SPI or I2C, and a USART. The '04' speed grade denotes 4 MHz operation; a '20' grade variant is available for 20 MHz / 200 ns instruction cycle designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and a configurable set of peripheral interfaces. The PIC16C family uses a Harvard RISC architecture with a small instruction set (35 single-word instructions) that lets most instructions execute in one instruction cycle, providing predictable real-time behaviour with simple C or assembly code. PIC16C parts sit in the hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> CMOS RISC MCU -> Microchip PIC16C family. Key differentiating features of the PIC16C74B include its parallel EPROM program memory (windowed variants allow UV erasure for prototyping; OTP variants are one-time programmable for production), hardware USART for asynchronous serial communications, and the Capture/Compare/PWM peripheral for timing and motor-control applications. The 8-channel 10-bit equivalent (8-bit on the 74B variant) ADC removes the need for an external converter in mixed-signal designs, while the master SSP supports both SPI and I2C peripherals without additional glue logic. The architecture separates program and data buses (Harvard), letting instruction fetch and data access occur in the same cycle. EPROM-based program memory is preferred over Flash for legacy designs that need radiation tolerance or long-term retention without frequent firmware updates. The PIC16C74B shares its peripheral set and pinout with later PIC16F and PIC18 K-series migration paths. Typical applications include industrial control panels, motor-drive signal conditioning, instrumentation front-ends, sensor interfaces with on-chip ADC, and embedded communication front-ends that use the USART or SSP. Its wide operating temperature range and CMOS low-power design make it suitable for harsh-environment embedded systems. When designing with the PIC16C74B-04/PT, ensure that your compiler toolchain (MPLAB XC8 or legacy HI-TECH PICC) supports the PIC16C OTP/EPROM family and that the EPROM windowed variant is ordered for prototype development, not the OTP-only /PT production variant. Decoupling VDD with 0.1 uF + 10 uF caps and routing the MCLR pull-up correctly are mandatory. This page combines verified distributor pricing, drop-in alternative MPNs from the PIC16C/PIC16F family, and practical design notes that go beyond the bare datasheet, giving engineers a single source for selection and sourcing.

Cotação Contato

PIC16C74B-04E/L

PIC16C74B-04E/L - 8-bit OTP MCU 4MHz 7KB 44-PLCC | Microchip

The Microchip Technology PIC16C74B-04E/L is an 8-bit CMOS OTP-based microcontroller in the PIC16CXX mid-range family, operating at up to 4 MHz with 7KB (4K x 14) of One-Time-Programmable program memory and 192 bytes of data RAM, housed in a 44-pin PLCC (J-Lead) package. The 'E' suffix denotes the Extended temperature grade (-40C to +125C) and 'L' designates the 44-LCC J-Lead package, while '04' specifies the 4 MHz maximum clock speed. The PIC16CXX mid-range architecture executes instructions in 200 ns (at 20 MHz / 5 V) and offers 35 single-word instructions for easy programming. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals on one die. The PIC16C family sits within Microchip's mid-range MCU hierarchy: PIC10/12/16 baseline -> PIC16C mid-range -> PIC18/dsPIC enhanced -> 32-bit Cortex-M class. Mid-range MCUs target embedded control tasks that need deterministic timing, simple peripheral sets, and code density better than 8-bit baselines without the cost of a 32-bit core. Key features include 33 digital I/O lines, 8 channels of 8-bit Analog-to-Digital conversion, two 8-bit timers plus one 16-bit timer, two Capture/Compare/PWM (CCP) peripherals, a synchronous serial port configurable as SPI or I2C, and a Universal Synchronous/Asynchronous Receiver-Transmitter (USART). High sink/source current of 25 mA per pin simplifies direct drive of LEDs and small relays. Wide operating voltage spans 2.5 V to 6.0 V with typical standby current of 1 uA at 3 V / 32 kHz. Typical applications include industrial control panels, automotive body electronics, sensor signal conditioning, and embedded instrumentation where the extended temperature range and OTP-based code security are required. The PIC16C74B is also a drop-in successor to PIC16C74A variants in the same 44-pin PLCC footprint, offering a clear migration path within Microchip's mid-range portfolio.

Cotação Contato

PIC16C74B-04E/P

PIC16C74B-04E/P - 8-bit OTP MCU, 7KB EPROM, 4MHz, 40-PDIP | Microchip

The Microchip PIC16C74B-04E/P is a CMOS OTP-based 8-bit PIC16C mid-range microcontroller delivering 4 MIPS performance through a 200 ns instruction cycle, integrated in a 40-pin PDIP package. The device provides 7 KB (4K × 14) of one-time-programmable EPROM program memory, 192 bytes of RAM, and 33 digital I/O pins, with an 8-channel 8-bit A/D converter, two 8-bit timers plus one 16-bit timer, two capture/compare/PWM modules, a synchronous serial port configurable as SPI or I²C, and a USART. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic control of low-to-medium complexity embedded systems. PIC microcontrollers belong to the Harvard-architecture RISC family of MCUs, a category that sits within the broader microcontroller IC taxonomy (MCU -> microcontroller -> embedded processor -> semiconductor). The PIC16C mid-range family is upwards compatible with the PIC16C5X baseline family, allowing code reuse across generations. Key features of the PIC16C74B include wide operating voltage from 2.0 V to 6.0 V, 25 mA source/sink current per I/O, and low-power operation with typical standby current of 15 µA at 5 V/4 MHz and 1 µA at 3 V/32 kHz. The device supports commercial, industrial, and extended temperature ranges, making it suitable for cost-sensitive industrial and consumer designs requiring robust digital I/O and integrated analog. Technically, the PIC16C74B uses a 14-bit instruction word and a Harvard bus architecture with separate program and data paths, enabling single-cycle instruction fetch and decode. Its 35 single-word instruction set simplifies assembly development, while the integrated peripherals reduce external component count for typical control loops, sensor interfacing, and communication bridging. Typical applications include industrial control panels, motor control, sensor signal acquisition, embedded communications bridges, and consumer appliance controllers. The wide temperature range and EPROM-based program storage make it well suited for mature production runs that value supply longevity and field-proven firmware stability. When designing with the PIC16C74B-04E/P, note that the OTP EPROM cannot be erased, so code is final after programming - consider the PIC16F74 flash variant for development and field updates. Decoupling capacitors of 0.1 µF should be placed close to VDD/VSS pins, and unused I/O should be configured as outputs low to minimize power consumption. This page synthesizes distributor pricing, drop-in PIC16C74B family variants, and practical design notes not found in the standalone manufacturer datasheet, helping engineers accelerate selection and sourcing.

Cotação Contato

PIC16C74B-04E/PQ

PIC16C74B-04E/PQ - 8-bit MCU, 7KB OTP, 4MHz, 44-MQFP | Microchip

The Microchip Technology PIC16C74B-04E/PQ is an 8-bit CMOS microcontroller from the PIC16CXX mid-range family, integrating 7KB (4K x 14) of One-Time Programmable (OTP) program memory and 192 bytes of RAM in a 44-pin Metric Quad Flat Pack (MQFP, 10x10 mm) package. It operates at up to 4 MHz clock speed from a 5 V supply, executes one instruction per 200 ns cycle, and supports the enhanced PIC mid-range instruction set with 35 single-word instructions. What is a PIC16C74B? The PIC16C74B belongs to the PIC16 mid-range 8-bit microcontroller family, a class of RISC microcontrollers built on Harvard architecture with separate program and data buses. These devices sit in the hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> PIC mid-range, and they are widely used as the system controller in cost-sensitive industrial and consumer products where deterministic real-time response matters more than raw throughput. The PIC16C74B integrates 33 digital I/O lines, an 8-channel 8-bit Analog-to-Digital Converter (ADC), two 8-bit timers plus one 16-bit timer, two Capture/Compare/PWM (CCP) modules, a synchronous serial port configurable as 3-wire SPI or 2-wire I2C, and a USART with 9-bit address masking. The brown-out reset, watchdog timer with on-chip RC oscillator, and programmable code protection harden the device for unattended installations. Typical applications include industrial automation controllers, automotive body and chassis subsystems, consumer appliances, uninterruptible power supply (UPS) front panels, and sensor-conditioning front-ends. The 8-channel ADC allows direct interface with thermistor, potentiometer, or 4-20 mA loop transducers, while the dual CCP modules drive brushed DC motors or generate precision PWM waveforms for switching power supply control loops. The "E" suffix denotes the Extended industrial temperature grade (-40C to +125C), and "04" specifies the 4 MHz maximum oscillator frequency. The PIC16C74B-04E/PQ is supplied in Pb-free MQFP-44 packaging on tray, and programmers using the Microchip MPLAB ICD 2/3 or PICSTART Plus can develop code with the free MPLAB X IDE and MPASM assembler.

Cotação Contato

PIC16C74B-04E/PT

PIC16C74B-04E/PT - 8-bit OTP MCU, 7KB, 4MHz, TQFP-44 | Microchip

The Microchip Technology PIC16C74B-04E/PT is an 8-bit CMOS RISC microcontroller from the PIC16CXX mid-range family, featuring 7KB (4K x 14) of One-Time Programmable (OTP) EPROM program memory, 192 bytes of RAM, and 33 digital I/O lines, housed in a 44-pin TQFP (PT) surface-mount package. It runs from a 4 MHz external oscillator at 4 MHz with a 200 ns instruction cycle, supports a wide operating voltage range of 2.5V to 6.0V, and is specified over the Extended temperature grade (-40C to +125C) as indicated by the "E" suffix. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (ROM/EPROM/Flash), volatile data memory (RAM), and a set of programmable peripherals (timers, ADC, communication ports, GPIO). Within the broader taxonomy, the PIC16C74B belongs to the 8-bit MCU family -> mid-range PIC architecture -> RISC MCU -> embedded controller. These devices are designed for deterministic real-time control with a small instruction set (35 single-word instructions), short interrupt latency, and low power consumption - typically under 15 uA at 5V/4 MHz and 1 uA standby at 3V/32 kHz. Key features include 8 channels of 8-bit A/D conversion, 2 additional timers beyond the basic Timer0/Timer1 pair, 2 Capture/Compare/PWM (CCP) modules, a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C, and a USART for asynchronous serial communication. High sink/source current of 25/25 mA per pin allows direct LED drive, while the EPROM-based program memory simplifies prototyping by enabling windowed erasure and reprogramming on JTAG/ICSP-compatible devices. Architecturally, the PIC16C74B uses a Harvard-style separate program/data bus with a 14-bit instruction word and an 8-bit data path. The 200 ns instruction execution at 20 MHz (5 MIPS peak) and 1 us at 4 MHz deliver predictable timing for control loops. An integrated brown-out reset, power-on reset, watchdog timer with on-chip RC oscillator, and programmable code protection round out the embedded feature set. Typical applications include industrial control panels, automotive body and instrument clusters, HVAC fan/blower controllers, white-goods motor control front-ends, and legacy embedded systems where OTP EPROM is acceptable. The TQFP-44 footprint suits high-density mainboards where DIP packages cannot fit. When designing with this part, note the EPROM windowing caveat: only ceramic-windowed packages are erasable; the plastic TQFP-44 is one-time-programmable in production. Plan firmware accordingly and keep a programming reserve. This page synthesizes distributor pricing, drop-in TQFP-44 alternatives, and design notes not aggregated in any single manufacturer datasheet, with cross-references validated against the Microchip parametric search and the PIC16C74B datasheet.

Cotação Contato

PIC16C74B-04I/L

PIC16C74B-04I/L - 8-bit OTP MCU, 7KB, 4MHz, 44-PLCC | Microchip

The Microchip Technology PIC16C74B-04I/L is an 8-bit CMOS OTP-based microcontroller from the PIC16CXX mid-range family, delivering 4 MIPS performance through a 200 ns instruction cycle at 4 MHz clock input. The device integrates 7 KB of OTP program memory (4K x 14), 192 bytes of RAM, and 33 digital I/O pins in a 44-pin PLCC (J-Lead) package, qualified for the industrial -40C to +85C temperature range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data RAM, and peripheral interfaces onto one silicon die. Within the broader taxonomy, the PIC16C74B belongs to the mid-range 8-bit MCU class (vs. baseline 12-bit core and enhanced 14-bit core), uses Harvard architecture with separate program/data buses, and executes one instruction per internal clock cycle (except program branches which are two cycles). The mid-range PIC family employs an advanced RISC instruction set with only 35 single-word instructions, enabling rapid code development and high code density. OTP (One-Time Programmable) memory is mask-ROM-like non-volatile storage that can be written once during production programming - distinct from flash which can be rewritten many times in-circuit. Key features include 8 channels of 8-bit Analog-to-Digital conversion, two additional 8-bit timers (TMR0, TMR1, TMR2), two Capture/Compare/PWM modules, a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C, and a USART with 9-bit address detection. The device operates from 2.5V to 5.5V across the industrial temperature range, includes an 8-level hardware stack, power-on reset, brown-out detect, watchdog timer with on-chip RC oscillator, and in-circuit serial programming capability. The PIC16C74B uses Microchip's PIC16C mid-range core built on a fully-static CMOS process, with a 14-bit instruction word and 8-bit data path. The Harvard architecture allows simultaneous instruction fetch and data access, and the 200 ns instruction execution at 4 MHz provides deterministic interrupt response suitable for real-time control loops. The on-chip peripherals are mapped into the data memory space and accessed via banked registers, with the FSR/INDF indirect addressing mechanism for pointer-based data access. Typical applications include industrial control panels, motor control subsystems, automotive body electronics (pre-CAN era), smart sensor interfaces, and embedded control modules requiring reliable OTP memory with deterministic interrupt latency. The 33 I/O pins and dual PWM channels make the device suitable for driving multiple actuators or LED arrays from a single chip. When designing with this device, ensure the OTP programming step is integrated into the production flow because OTP memory cannot be field-upgraded. The PLCC package provides socket compatibility for legacy through-hole production lines but requires a footprint transition for new designs moving to surface-mount packages. The 4 MHz maximum clock is the limiting performance factor; designs requiring higher throughput should consider the PIC16C74B-10 or PIC16C74B-20 speed grades or the flash-based PIC18F family. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes - including pinout, package-svg, and FAQ not found on the manufacturer datasheet alone - to accelerate component selection for engineers maintaining legacy PIC16C designs.

Cotação Contato

PIC16C74B-04I/P

PIC16C74B-04I/P - 8-Bit 4MHz OTP MCU 7KB 40-PDIP | Microchip

The Microchip Technology PIC16C74B-04I/P is an 8-bit CMOS RISC microcontroller in the PIC16CXX mid-range family, delivering 4 MHz CPU clock (200 ns instruction cycle) with 7 KB of One-Time Programmable (OTP) program memory and 192 bytes of RAM, housed in a 40-pin PDIP (Plastic DIP) through-hole package. What is a PIC16 mid-range MCU? The PIC16CXX family is a generation of Microchip 8-bit microcontrollers built around a Harvard RISC architecture that executes single-cycle instructions from a 14-bit program word store. Mid-range PICs combine a compact 35-instruction set with integrated peripherals (ADC, timers, USART, SPI/I2C) and have been a workhorse for industrial, automotive aftermarket, and legacy embedded designs since the 1990s. The PIC16C74B specifically targets applications that need more I/O and memory than the smaller PIC16C6x family while keeping the OTP cost advantage. Key features include 8 channels of 8-bit ADC, two 8-bit timers plus one 16-bit timer, two Capture/Compare/PWM (CCP) modules, a synchronous serial port configurable as SPI or I2C, and a USART for asynchronous serial communication. The device supports 33 digital I/O lines organized across five ports (PORTA-PORTE), an operating voltage of 4.0 V to 5.5 V, and an industrial temperature grade of -40 °C to +85 °C as indicated by the "I" suffix. Architecturally, the PIC16C74B uses a fully-static CMOS design with separate program and data buses (Harvard architecture), enabling single-cycle instruction fetch plus execute on all instructions except program branches, which take two cycles. The 04 speed grade specifies a 4 MHz maximum oscillator input. The "C" in PIC16C denotes the OTP/EPROM ROMless windowed family, distinguished from the flash-based "F" parts such as the PIC16F877. Typical applications include industrial control panels, instrumentation and metering, sensor interfacing using the on-chip ADC, motor-control hobby projects using the CCP/PWM channels, and legacy embedded systems that require OTP-based firmware storage for cost or anti-retrofit reasons. Because the part is OTP, firmware is committed at programming time and cannot be re-flashed in-circuit. When designing with this device, place a 0.1 µF decoupling capacitor on VDD within 5 mm of the pin and use a bulk 10 µF tantalum on the supply rail. The MCLR reset pin must be pulled high through a 10 kΩ resistor for normal operation; an optional reset circuit can use a diode and RC network for power-on-reset delay. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

PIC16C74B-04I/PQ

PIC16C74B-04I/PQ - 8-Bit 4MHz OTP MCU, 7KB, 44-MQFP | Microchip

The Microchip Technology PIC16C74B-04I/PQ is an 8-bit CMOS OTP-based microcontroller in the PIC16CXX mid-range family, operating at up to 4 MHz with 200 ns instruction execution. It integrates 7 KB (4K x 14) of One-Time-Programmable program memory and 192 bytes of data RAM, housed in a 44-pin MQFP (10x10 mm) package with industrial -40C to +85C temperature rating. An 8-bit microcontroller is a small computer-on-a-chip that combines a CPU, RAM, non-volatile program memory, and peripherals on a single die. The PIC16C74B belongs to the PIC mid-range architecture hierarchy (8-bit PIC -> PIC16 family -> PIC16C7x sub-family), sits within the broader Microcontroller (MCU) category, and is part of Integrated Circuits > Microcontrollers. Mid-range PIC16 devices use a 14-bit instruction word and a RISC core with only 35 single-word instructions, providing deterministic timing and very low power consumption. Key features include 8 channels of 8-bit Analog-to-Digital conversion, 33 digital I/O pins with 25 mA sink/source drive, two additional timers, two Capture/Compare/PWM modules, a synchronous serial port configurable as 3-wire SPI or 2-wire I2C, and a USART. Wide operating voltage spans 2.5 V to 6.0 V, with typical standby current of 1 uA at 3 V/32 kHz and 15 uA at 5 V/4 MHz, making the part suitable for both line-powered and battery-backed designs. The architecture pairs a Harvard RISC core with 5 MIPS peak throughput at 4 MHz, an internal 8-bit data bus, and a 14-bit program bus. The OTP program memory is windowed for prototype development and field-programmed via Microchip's standard ICSP interface, while the EPROM-style die allows short reprogram cycles during engineering. Typical applications include industrial control systems, instrumentation front-ends with on-chip ADC, motor-control PWM drivers, embedded sensor hubs, and legacy PIC16C designs being maintained or re-spun. The combination of USART, SPI/I2C and an 8-channel ADC makes the part a versatile single-chip solution for analog-dominated 5 V systems. When designing with this MCU, budget for OTP one-time programming: code changes require new parts for production. Provide a robust decoupling network (100 nF + 10 uF) near VDD and use the MCLR reset circuit with the recommended 10 kohm pull-up. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

PIC16C74B-04I/PT

PIC16C74B-04I/PT - 8-Bit 4MHz OTP MCU, 7KB Flash | Microchip

The Microchip Technology PIC16C74B-04I/PT is an 8-bit CMOS RISC microcontroller from the PIC16CXX mid-range family, featuring 7KB (4K x 14 words) of One-Time Programmable (OTP) program memory, 192 bytes of RAM, and 33 general-purpose I/O pins in a 44-pin TQFP (10x10 mm) surface-mount package. It operates at a clock speed of 4 MHz with a 200 ns instruction cycle, executes the 35-instruction PIC mid-range instruction set, and provides 8 channels of 8-bit Analog-to-Digital conversion alongside two capture/compare/PWM modules, two additional timers, and a configurable synchronous serial port that can be set as either 3-wire SPI or 2-wire I2C plus a USART. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces on one silicon die. The PIC16CXX mid-range family sits between the baseline PIC16C5X and the enhanced PIC17CXX families, balancing code density, peripheral set, and cost for embedded control applications such as industrial sensors, appliance controls, automotive body electronics, and low-cost consumer devices. Key differentiating features include 8 channels of 8-bit ADC, 2 CCP (Capture/Compare/PWM) modules for motor and lighting control, hardware I2C/SPI/USART enabling direct connection to sensors and EEPROMs, and a wide operating voltage range suitable for both 5V and 3.3V systems. The OTP memory and industrial-grade temperature rating (-40C to +85C) make this part well suited for medium-volume production where field reprogrammability is not required. The PIC16C74B-04I/PT uses Microchip's classic Harvard RISC architecture with separate program and data buses, enabling single-cycle instruction execution for most opcodes and deterministic interrupt response. Its CMOS fully-static design allows the clock to be stopped without losing register state, an advantage for battery-powered or power-cycled applications where the controller must wake, execute, and return to sleep quickly. Typical applications include industrial automation controllers, HVAC sensor interfaces, automotive body and lighting modules, consumer appliance control boards, and low-end embedded data acquisition. Designers commonly pair this MCU with external EEPROMs for parameter storage and with discrete MOSFET drivers for switching solenoids, relays, or small DC motors. A key design consideration is the OTP memory window: once programmed, code is permanent, so engineering teams must use a windowed or flash sibling (such as PIC16F74 or PIC16F877A) for development. Also note that the 4 MHz speed grade (the "-04" suffix) is the slowest in this family; if timing margins are tight, the 10 MHz or 20 MHz grade variants of the same die are drop-in substitutes.

Cotação Contato

PIC16C74B-20/L

PIC16C74B-20/L - 8-Bit OTP MCU 7KB 20MHz 44-PLCC | Microchip

The Microchip Technology PIC16C74B-20/L is an 8-bit CMOS one-time programmable (OTP) microcontroller from the PIC16CXX mid-range family, offering 7KB (4K x 14) of program memory, 192 bytes of RAM, and 33 digital I/O lines. Housed in a 44-pin PLCC (Plastic Leaded Chip Carrier) package, it executes instructions at 20 MHz with a 200 ns instruction cycle, providing high-performance RISC computing in a compact footprint. What is a PIC mid-range 8-bit MCU? A PIC (Peripheral Interface Controller) microcontroller is a compact integrated circuit that combines a CPU, memory, and programmable peripherals on a single die. The mid-range family (PIC16C) sits between baseline (PIC10/12/16F general-purpose) and enhanced mid-range (PIC18) families, offering 35 single-word instructions, 14-bit instruction width, and a balance of peripherals for embedded control. PIC16C parts use OTP (one-time programmable) EPROM program memory, which is differentiated from flash-based PIC16F variants. Key features include 8 channels of 8-bit Analog-to-Digital conversion, two 8-bit and one 16-bit timer/counter modules, two Capture/Compare/PWM (CCP) peripherals, a synchronous serial port configurable as SPI or I2C, and a USART for asynchronous serial communication. Operating voltage spans 4.0V to 5.5V, suiting legacy 5V industrial and embedded designs. The architecture employs a Harvard design with separate program and data buses, allowing 14-bit instruction fetch and 8-bit data access in a single cycle. Brown-out Reset (BOR), Watchdog Timer (WDT), and Power-on Reset (POR) provide robust operation in noisy environments. The 44-PLCC package gives 33 I/O - more than 28-pin PIC16C73 family members. Typical applications include industrial process controllers, motor control subsystems, instrumentation front-ends, and automotive body electronics where code stability and 5V tolerance outweigh the need for in-system reprogrammability. When migrating designs, consider PIC16F74 flash variants for in-circuit reprogrammability - the pinout is compatible with PLCC-44 footprints. This page synthesizes current distributor pricing, drop-in PIC16C74B alternatives, and PLCC-44 design notes not consolidated on the Microchip product page.

Cotação Contato

PIC16C74B-20/P

PIC16C74B-20/P - 8-bit OTP MCU 7KB Flash 20MHz 40-PDIP | Microchip

The Microchip Technology PIC16C74B-20/P is an 8-bit CMOS RISC microcontroller from the PIC® 16C family, featuring 7KB (4K x 14) of One-Time-Programmable (OTP) program memory, 192 bytes of RAM, and 33 digital I/O pins in a 40-pin PDIP through-hole package. It operates at up to 20 MHz clock speed with a 200 ns instruction cycle, runs from a 4.0 V to 5.5 V supply, and integrates 8 channels of 8-bit A/D conversion, two 8-bit timers plus one 16-bit timer, two Capture/Compare/PWM modules, and a configurable synchronous serial port that supports both 3-wire SPI™ and 2-wire I²C™ plus a USART. Background: An 8-bit OTP microcontroller is a single-chip processor with on-chip non-volatile program memory that can be written exactly once via external programming voltage, then behaves like mask-ROM. OTP parts sit in the hierarchy: microcontroller -> embedded processor -> semiconductor IC. Compared to flash-based MCUs (e.g. PIC16F), OTP MCUs offer lower per-unit cost at high volume and are typically used for mature, locked firmware designs in appliance, industrial, and automotive subsystems where firmware updates are not expected in the field. Key features include Harvard RISC architecture with only 35 single-word instructions, all single-cycle except program branches (which take two cycles), 8-channel 8-bit ADC with input multiplexing, dual CCP modules for PWM and event capture, brown-out reset and power-on reset, watchdog timer with on-chip RC oscillator, and an industrial temperature grade. The device is code- and pin-compatible with the PIC16C73B and PIC16C65B predecessors, simplifying upgrades. Typical applications include motor control (BLDC and stepper), industrial process control, sensor interfacing, embedded control in appliance and HVAC, automotive body and chassis subsystems, and general-purpose 8-bit control boards. The DIP-40 package and breadboard-friendly pinout also make it suitable for educational, prototyping, and legacy replacement scenarios. When designing with this part, note that OTP memory cannot be erased or rewritten; firmware must be fully verified before programming. Always provide a decoupling capacitor on VDD, and respect the programming voltage specification on the MCLR/VPP pin if in-circuit programming is intended. This page synthesizes distributor pricing, pin-compatible drop-in alternatives (PIC16C73B, PIC16C74A), and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

Subcategorias

Produtos (39.000+)

PIC16C74AT-10E/PQ - 8-Bit 10MHz 7KB OTP MCU 44-QFP | Microchip

PIC16C74AT-10E/PT - 8-Bit 10MHz 7KB OTP MCU | Microchip

PIC16C74AT-10I/L - 8-bit OTP MCU 7KB 192 RAM 33 I/O | Microchip

PIC16C74AT-10I/PQ - 8-Bit 10MHz 7KB OTP MCU | Microchip Technology

PIC16C74AT-10I/PT - 8-bit OTP MCU, 7KB, 33 I/O | Microchip

PIC16C74AT-20/PQ - 8-Bit 20MHz MCU, 7KB OTP, 44-MQFP | Microchip

PIC16C74AT-20/PT - 8-Bit 20MHz OTP MCU 7KB | Microchip

PIC16C74AT-20E/PQ - 8-bit 20MHz OTP MCU 7KB | Microchip

PIC16C74AT-20I/L - 8-bit 20MHz PIC MCU, 7KB OTP, 44-PLCC | Microchip

PIC16C74AT-20I/PQ - 8-Bit 20MHz OTP MCU, 7KB | Microchip

PIC16C74AT-20I/PT - 8-Bit 20MHz OTP MCU 7KB | Microchip

PIC16C74B-04/L - 8-Bit OTP MCU 7KB 4MHz 33 I/O PLCC-44 | Microchip

PIC16C74B-04/PQ - 8-Bit 4MHz OTP MCU 7KB Flash | Microchip

PIC16C74B-04/PT - 8-Bit CMOS MCU, 4MHz, 7KB EPROM, TQFP-44 | Microchip

PIC16C74B-04E/L - 8-bit OTP MCU 4MHz 7KB 44-PLCC | Microchip

PIC16C74B-04E/P - 8-bit OTP MCU, 7KB EPROM, 4MHz, 40-PDIP | Microchip

PIC16C74B-04E/PQ - 8-bit MCU, 7KB OTP, 4MHz, 44-MQFP | Microchip

PIC16C74B-04E/PT - 8-bit OTP MCU, 7KB, 4MHz, TQFP-44 | Microchip

PIC16C74B-04I/L - 8-bit OTP MCU, 7KB, 4MHz, 44-PLCC | Microchip

PIC16C74B-04I/P - 8-Bit 4MHz OTP MCU 7KB 40-PDIP | Microchip

PIC16C74B-04I/PQ - 8-Bit 4MHz OTP MCU, 7KB, 44-MQFP | Microchip

PIC16C74B-04I/PT - 8-Bit 4MHz OTP MCU, 7KB Flash | Microchip

PIC16C74B-20/L - 8-Bit OTP MCU 7KB 20MHz 44-PLCC | Microchip

PIC16C74B-20/P - 8-bit OTP MCU 7KB Flash 20MHz 40-PDIP | Microchip