Circuitos Integrados

Subcategorias

📁 ADC/DAC 2519 produtos 📁 CIs Amplificadores 797 produtos 📁 Codecs de Áudio 16 produtos 📁 CIs de Áudio 2 produtos 📁 Relógio e Temporização 306 produtos 📁 DSP 963 produtos 📁 CIs de Aquisição de Dados 2 produtos 📁 Potenciômetros Digitais 4 produtos 📁 Drivers e Controladores de Display 1 produtos 📁 FPGA & CPLD 6666 produtos 📁 CIs de Interface 1593 produtos 📁 Drivers de LED 1 produtos 📁 CIs Lógicos 305 produtos 📁 CIs de Memória 875 produtos 📁 Microcontroladores 18743 produtos 📁 Microprocessadores 4 produtos 📁 Drivers de Motor 1 produtos 📁 Outros 1 produtos 📁 Sensor and Detector Interfaces 1 produtos 📁 CIs Especializados 15 produtos 📁 CIs de Vídeo 13 produtos

Produtos (32830)

PIC32MX150F128B-V/SS - 40MHz 128KB Flash MCU | Microchip
PIC32MX150F128B-V/SS

PIC32MX150F128B-V/SS - 40MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC32MX150F128B-V/SS is a 32-bit MIPS32 M4K PIC microcontroller running at 40 MHz, equipped with 128 KB Flash and 32 KB SRAM in a 28-pin SSOP package with 21 I/O pins. It operates from 2.3V to 3.6V, supports automotive-grade temperature range -40°C to +105°C, and consumes less than 0.5 mA/MHz active current. The -V/SS suffix designates the 28-pin SSOP package and the high-temperature grade. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a CPU core, Flash program memory, SRAM, and a rich set of peripherals on a single die. Within the broader taxonomy, PIC32MX devices sit in the microcontroller -> embedded controller -> semiconductor hierarchy. The MIPS M4K core supports the MIPS32 instruction architecture, providing 32-bit datapath performance while remaining code-compatible with the broader PIC32 ecosystem. This PIC32MX150/170/1XX family targets cost-sensitive embedded designs needing USB, audio, and graphics interfaces. Key features include two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics interfaces, and support for mTouch capacitive touch buttons and sliders. The integrated Charge Time Measurement Unit (CTMU) provides 1 ns high-resolution time measurement, while an on-chip temperature sensor simplifies thermal monitoring without external components. Five general-purpose 16-bit timers and a 10-bit ADC round out the analog and timing peripherals. Architecturally, the M4K core is a 5-stage pipeline RISC processor with hardware multiply/divide, delivering 1.56 DMIPS/MHz. The 128 KB Flash is organized as 128K x 8 with ECC support, and 32 KB SRAM provides ample workspace for protocol stacks and audio buffers. PPS is particularly valuable because it allows digital peripheral pins to be remapped in software, simplifying PCB layout when signals would otherwise need to cross. Typical applications include USB audio peripherals, low-cost graphics HMI with PMP-driven LCDs, capacitive touch key panels, industrial control with mTouch, and automotive body controllers benefiting from the extended -40°C to +105°C grade. The device is well-suited to bridge products transitioning from PIC16/PIC24 designs to 32-bit performance. When using this part, ensure the 32 kHz crystal and PLL configuration follow the datasheet's oscillator tuning procedure to meet USB Full-Speed timing. JTAG/ICSP pads must remain accessible for in-circuit programming if the application does not dedicate them to other functions. This page synthesizes distributor stock, parameter-matched drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotação Contato
PIC32MX150F128BT-50I/ML - 50MHz 32-bit MCU, 128KB Flash, 28-QFN | Microchip
PIC32MX150F128BT-50I/ML

PIC32MX150F128BT-50I/ML - 50MHz 32-bit MCU, 128KB Flash, 28-QFN | Microchip

The Microchip Technology PIC32MX150F128BT-50I/ML is a 32-bit MIPS32 M4K PIC microcontroller operating at 50 MHz, with 128 KB Flash and 32 KB SRAM, housed in a 28-pin QFN (6x6 mm) package with exposed thermal pad. It is part of the PIC32MX1XX/2XX 28/36/44-pin family and supports an industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, communication controllers, and analog blocks. The PIC32MX150 sits in Microchip's 32-bit MCU hierarchy: PIC32MX150 -> PIC32MX1XX family -> PIC32MX series -> 32-bit MCU -> microcontroller -> embedded computing -> semiconductor. It uses the MIPS32 M4K core, a Harvard-architecture RISC processor with single-cycle multiplication, optimized for deterministic real-time performance. Key features include 128 KB (128 K x 8) Flash, 32 KB SRAM, 21 general-purpose I/O pins, two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible pin mapping, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, high-resolution 1 ns time measurement, on-chip temperature sensing, and less than 0.5 mA/MHz active current consumption. The 28-QFN package (ML suffix, 6x6 mm body, exposed pad for thermal dissipation) supports surface-mount assembly and provides a low thermal resistance path for the silicon die. The 50 MHz operating speed is paired with separate PLLs for CPU and USB clocks, multiple DMA channels, and dual I2C, UART, SPI, I2S, and PMP interfaces. Typical applications include USB audio peripherals, low-cost graphics interfaces with PMP-driven LCDs, capacitive touch human-machine interfaces, sensor hubs with on-chip temperature measurement, industrial control panels, and consumer audio devices requiring I2S interfaces. When designing with this device, ensure the exposed pad is soldered to a sufficient copper area for thermal dissipation. The PPS system requires peripheral pin lock configuration to prevent accidental remapping at runtime. This page synthesizes verified distributor pricing, drop-in alternatives from the same PIC32MX1XX family, and practical design notes - information beyond what the manufacturer datasheet alone provides.

Cotação Contato
PIC32MX150F128BT-50I/SO - 50MHz 32-bit MCU 128KB Flash SOIC-28 | Microchip
PIC32MX150F128BT-50I/SO

PIC32MX150F128BT-50I/SO - 50MHz 32-bit MCU 128KB Flash SOIC-28 | Microchip

The Microchip Technology PIC32MX150F128BT-50I/SO is a 32-bit MIPS32 M4K RISC microcontroller featuring 128KB of Flash program memory, 32KB of SRAM, and a maximum CPU clock speed of 50 MHz, supplied in a 28-pin Small Outline IC (SOIC) package supplied on Tape and Reel. According to the Microchip PIC32MX1xx/2xx datasheet, the device integrates a 5-stage pipeline, 1.56 DMIPS/MHz core, hardware Multiply/Divide unit, and a Peripheral Pin Select (PPS) system that remaps digital peripherals to any I/O pin for maximum board-layout flexibility. What is a PIC32 microcontroller? The PIC32MX family is Microchip's line of MIPS-based 32-bit microcontrollers positioned between the 8-bit PIC16/PIC18 and the 32-bit Cortex-M families. PIC32MX parts run the MIPS32 M4K core and are supported by MPLAB X IDE, Harmony MCC, and the XC32 compiler. They are widely used in hobbyist and industrial designs where 32-bit performance, deterministic interrupt behavior, and rich connectivity peripherals (USB, CAN, I2S, PMP) are needed without stepping up to Cortex-M cost. Key features of the PIC32MX150F128BT-50I/SO include 21 general-purpose I/O pins, two I2S/SPI modules for codec and serial communications, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, on-chip temperature measurement, and 1 ns high-resolution time capture. Two comparators, a 10-bit 1 Msps ADC with up to 13 channels, and five 16-bit timers round out the analog and timing peripherals. The -50 speed grade is rated up to 50 MHz at 2.5V-3.6V operation. Architecturally, the PIC32MX150 uses 1.8V internal core regulation with a separate I/O supply domain, allowing the I/O ring to run at 3.3V while the core runs at 1.8V. The 128KB Flash is single-bank and supports runtime self-programming under firmware control, while the 32KB SRAM includes DMA-accessible regions for high-throughput peripheral transfers. Typical applications include USB device peripherals, audio playback and processing, low-cost graphics HMI via PMP, sensor hubs, and industrial control nodes that benefit from the deterministic 5-stage pipeline. The 28-SOIC footprint is friendly to through-hole-style hand-soldered prototypes as well as automated SMT lines. When designing with this part, place a 0.1 uF decoupling capacitor within 5 mm of each VDD/VSS pair and a bulk 10 uF tantalum or ceramic near the regulator. Leave the VBUS pin floating if USB is not used, and reserve an ICSP header on every prototype for in-circuit debugging. This page consolidates distributor pricing, drop-in alternative MPNs in the same 28-SOIC footprint, and practical design guidance not found in the standalone datasheet.

Cotação Contato
PIC32MX150F128BT-50I/SS - 50MHz 128KB Flash 32-bit MCU | Microchip
PIC32MX150F128BT-50I/SS

PIC32MX150F128BT-50I/SS - 50MHz 128KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX150F128BT-50I/SS is a 32-bit RISC microcontroller based on the MIPS32 M4K core, delivering up to 50 MHz CPU clock with 128 KB Flash and 32 KB SRAM, housed in a 28-pin SSOP (5.30 mm body width) package. It integrates Peripheral Pin Select (PPS), two I2S/SPI modules, a Parallel Master Port (PMP), USB 2.0 full-speed support, mTouch capacitive touch sensing, and a 1 ns high-resolution time measurement module. Industrial temperature range spans -40C to +85C, with sub-0.5 mA/MHz active current consumption. A 32-bit microcontroller (MCU) is a single-chip computer integrating a 32-bit processor core, program and data memory, and programmable peripherals. Within the system hierarchy, the PIC32MX150F128B belongs to the PIC32MX family -> 32-bit MCU family -> microcontroller -> embedded processor -> semiconductor. Compared to 8-bit PIC MCUs, the MIPS32 M4K core offers up to 1.56 DMIPS/MHz, suitable for DSP and graphics workloads where 8-bit cores cannot keep pace. Key features include 50 MHz max CPU speed, 128 KB Flash program memory organized as 128K x 8, 32 KB SRAM, USB 2.0 full-speed Device/Host/OTG support, 10-bit 1 Msps ADC with up to 13 analog inputs, four I2C, five UART, two I2S/SPI, and PMP for graphics LCDs. A real-time clock and calendar (RTCC) with backup power input is integrated, plus five 16-bit timers and a 32-bit core timer for precise scheduling. Architecturally, the device uses a Harvard bus with separate Flash and RAM paths, M4K pipelined core with single-cycle multiply, and Peripheral Pin Select remapping that allows most digital peripherals to be routed to any remappable GPIO pin at runtime. This eliminates the PCB redesign cycle when a peripheral is moved. Internal 8 MHz FRC and PLL support 4x multiplication to reach 50 MHz system clock without external oscillator cost. Typical applications include USB peripherals (HID, CDC, audio class), small TFT graphics HMI panels using PMP, audio codec interfaces via I2S, capacitive touch button panels, low-cost industrial sensor hubs, and consumer appliances requiring USB connectivity with modest computational headroom. The integrated USB PHY makes the PIC32MX150F128BT particularly attractive for low-BOM-count designs. When designing with this MCU, allocate decoupling capacitors (100 nF + 10 uF) on each VDD/AVDD pair within 3 mm of the pins, and follow Microchip's application note AN588 for USB board layout to maintain 90-ohm differential impedance. The ICSP programming pins must be brought out for in-circuit programming and debugging; consult MPLAB X IDE for pin allocator settings.

Cotação Contato
PIC32MX150F128BT-I/ML - 32-bit MCU 128KB Flash 40MHz | Microchip
PIC32MX150F128BT-I/ML

PIC32MX150F128BT-I/ML - 32-bit MCU 128KB Flash 40MHz | Microchip

The Microchip PIC32MX150F128BT-I/ML is a 32-bit MIPS32 M4K RISC microcontroller with 128 KB Flash, 32 KB SRAM, and 40 MHz maximum CPU clock, housed in a 28-pin QFN (6x6 mm) package with exposed pad for thermal dissipation. It operates from 2.3 V to 3.6 V and integrates two I2S/SPI modules, two UART, two I2C, a USB 2.0 Full-Speed device peripheral, a Parallel Master Port (PMP), and a 10-bit 1 Msps ADC with up to 13 channels. What is a 32-bit PIC microcontroller? A 32-bit MCU is a microcontroller whose arithmetic logic unit, registers, and data bus are all 32 bits wide, enabling single-cycle multiplications, larger linear address spaces, and significantly higher throughput than 8-bit or 16-bit alternatives. The PIC32MX family is Microchip Technology's migration path from the PIC16/PIC24 lines to true 32-bit performance while preserving Peripheral Pin Select (PPS) flexibility and the MPLAB X / Harmony tool-chain ecosystem. Positioned in the hierarchy: PIC32MX150F128B -> PIC32MX1xx family -> PIC32MX series -> PIC32 family -> 32-bit microcontroller -> microcontroller -> embedded semiconductor. Key features of this part include 21 general-purpose I/O lines, five 16-bit timers (with Input Capture and Output Compare), a 5-channel DMA controller, mTouch capacitive-touch hardware, an on-chip temperature sensor, and pin remapping via PPS. The MIPS32 M4K core delivers 1.56 DMIPS/MHz (approx. 52 DMIPS at 40 MHz), bringing genuine 32-bit performance to cost-sensitive designs. The 128 KB Flash supports self-programming and the 32 KB SRAM comfortably accommodates TCP/IP stacks or USB audio class frames. Technical depth: the silicon integrates dedicated PLLs for the system clock and the USB clock, allowing the 48 MHz USB clock to be generated without an external crystal when the system uses the internal 8 MHz oscillator plus PLL. Two Comparators and a CTMU (Charge Time Measurement Unit) round out the analog front end, while JTAG and two-wire ICSP provide debug. Typical applications include USB audio interfaces (USB headphone DAC), capacitive touch panels, low-cost graphics with PMP-driven TFTs, sensor hubs, and battery-powered IoT nodes. Pairing it with a USB device stack and the on-chip PMP removes the need for an external display controller. When designing with this device, route the exposed pad (EP) to a continuous ground plane with multiple thermal vias to keep theta_JA within the 28-QFN thermal envelope; this is the single most common layout pitfall on QFN packages.

Cotação Contato
PIC32MX150F128BT-I/SO - 40MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128BT-I/SO

PIC32MX150F128BT-I/SO - 40MHz 32-bit MCU 128KB Flash | Microchip

The Microchip PIC32MX150F128BT-I/SO is a 32-bit MIPS32 M4K RISC microcontroller running at up to 40 MHz, integrating 128 KB of Flash program memory and 32 KB of SRAM in a 28-pin SOIC package. The 'BT' suffix denotes tape-and-reel packaging, the 'I' indicates the industrial -40C to +85C temperature range, and the 'SO' specifies the wide-body SOIC-28 outline. The device operates from a single 2.3V to 3.6V supply and consumes less than 0.5 mA/MHz active, making it well suited to battery-aware embedded designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals on one silicon die. Within the embedded hierarchy it sits at the same tier as 16-bit MCUs and 8-bit MCUs but offers higher computational throughput, larger addressable memory, and typically richer peripheral integration. PIC32MX1xx/2xx devices occupy the low-power, low-pin-count position of the PIC32 family, sitting between the smaller PIC24 16-bit line and the higher-pin-count PIC32MX3xx/4xx/5xx/6xx/7xx families. Key features include the MIPS32 M4K core with 5-stage pipeline and hardware multiply/divide, two I2S/SPI modules for audio codec interfaces, two UART and two I2C peripherals, a Parallel Master Port (PMP) for graphics displays, and up to four DMA channels with automatic data-size detection. Peripheral Pin Select (PPS) remaps most digital peripherals to a wide choice of physical pins, easing PCB layout. Five 16-bit timers, a 10-bit 1 Msps ADC with up to 13 channels, on-chip temperature sensing, and mTouch capacitive-touch support round out the analog and timing resources. A separate PLL for the USB clock allows full-speed USB 2.0 device operation independently of the system clock. The architecture uses a Harvard-style bus with separate program Flash and SRAM paths, and a configurable prefetch module that hides Flash latency at high clock rates. The 128 KB Flash is organized for in-application programming through self-write rows, and the device supports run-time DMA-driven peripheral servicing with minimal CPU intervention. Interrupt latency is deterministic, which simplifies real-time control loops. Typical applications include low-cost USB audio peripherals, small graphical HMI panels using PMP, capacitive-touch user interfaces, sensor hubs, and general-purpose 32-bit control replacing older PIC24 or 8051 designs. Designers migrating from 8-bit PIC16/PIC18 parts gain an immediate 30x-50x instruction throughput uplift while keeping the MPLAB X toolchain and Harmony framework. Design consideration: the 28-pin SOIC does not expose every peripheral on a fixed pin. Plan your pin map using PPS early in the schematic phase, and budget for an external 8 MHz primary crystal if USB accuracy is required - the internal 8 MHz Fast RC is insufficient for full-speed USB without software calibration against the USB SOF. This page synthesizes distributor pricing, drop-in package-equivalent alternatives, and practical design notes that are not collected in any single manufacturer datasheet, helping engineers shorten the BOM validation and second-source qualification cycle.

Cotação Contato
PIC32MX150F128BT-V/SO - 40MHz 32-bit MCU 128KB Flash 28-SOIC | Microchip
PIC32MX150F128BT-V/SO

PIC32MX150F128BT-V/SO - 40MHz 32-bit MCU 128KB Flash 28-SOIC | Microchip

The Microchip Technology PIC32MX150F128BT-V/SO is a 32-bit MIPS32 M4K PIC microcontroller running at 40 MHz with 128 KB of Flash and 32 KB of SRAM, housed in a 28-pin SOIC (SO) wide-body package. It operates from 2.3 V to 3.6 V over the -40C to +105C automotive V-temp range and integrates 21 general-purpose I/O, two I2S/SPI modules, a Parallel Master Port (PMP), a 1 Msps 10-bit ADC, mTouch capacitive touch support, and a 1 ns resolution time-capture unit. The single-cycle multiply hardware divider needs HW multiplier consume less than 0.5 mA/MHz for low-power embedded designs. A PIC32MX-series microcontroller is a 32-bit RISC MCU built on the MIPS microAptiv (M4K) core, sitting in Microchip's hierarchy of 32-bit embedded controllers: PIC32MX -> PIC32 -> 32-bit MCU -> microcontroller -> semiconductor. Compared with 8-bit PIC16/PIC18 devices, the PIC32MX delivers deterministic interrupt latency, full C-language efficiency, and on-chip peripherals that previously needed glue logic - making it a mainstream choice for human-machine interface (HMI), audio decoding, and USB device applications. Key features include two I2S/SPI interfaces for codec and serial communications, Peripheral Pin Select (PPS) for flexible signal routing, mTouch capacitive touch buttons and sliders, on-chip temperature measurement, and a Parallel Master Port for graphics interfaces. Hardware trace and JTAG boundary-scan interfaces support development, and the wide-body 28-SOIC footprint is friendly to through-hole DPCB prototypes and hand-rework designs. The device uses a Harvard-architecture bus with separate program Flash (128 KB) and data SRAM (32 KB) for deterministic code-fetch and zero-wait-state operation up to 40 MHz. Integrated DMA, up to 5 timers, PMP, I2S/SPI, USB, and ADC peripherals enable designers to consolidate multiple external components onto a single chip, reducing BOM cost and PCB area. Less than 0.5 mA/MHz active current keeps thermal dissipation low in compact sealed enclosures. Typical applications include USB audio bridges, capacitive touch human-machine interfaces, graphic LCD control via PMP, low-cost sensor data acquisition, and industrial control panels. The V-temp range and automotive pedigree make the -V/SO grade especially suited for AEC-Q100 design chains and automotive-grade subsystems where higher temperature reliability is required. When designing with the PIC32MX150F128BT-V/SO, confirm that your toolchain - MPLAB X IDE, XC32 compiler, and Harmony framework - supports the exact silicon revision (B revision). Route analog inputs away from PWM outputs to minimize ADC crosstalk, and use 100 nF + 10 uF decoupling close to each VDD/VSS pair. Boundary-scan is enabled through dedicated JTAG pins for in-circuit test coverage.

Cotação Contato
PIC32MX150F128BT-V/SS - 32-bit MCU 128KB Flash 40MHz | Microchip
PIC32MX150F128BT-V/SS

PIC32MX150F128BT-V/SS - 32-bit MCU 128KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX150F128BT-V/SS is a 32-bit MIPS32 M4K PIC microcontroller with 128 KB Flash, 32 KB SRAM, and 40 MHz CPU clock in a 28-pin SSOP (5.30 mm body) package. The device supports 21 I/O pins, operates from 2.3 V to 3.6 V, and is qualified for the -40C to +105C extended-industrial temperature range, as shown in the Microchip PIC32MX150/170 family datasheet. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and on-chip peripherals such as ADC, timers, communication interfaces, and I/O. The PIC32 family sits above the 8-bit PIC16/PIC18 families and below the high-performance PIC32MZ/32MK families, addressing applications that need 32-bit processing headroom with low power and rich peripherals. Within the PIC32MX1xx/2xx series, the part number suffix encodes the package and grade: T = tape and reel, V = -40C to +105C operating range, and SS = 28 SSOP. Key features include a MIPS32 M4K core running up to 40 MHz (50 MHz on selected -50I variants), Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) for graphics interfaces, two I2S/SPI modules for audio codec interfacing, mTouch capacitive-touch support, a 1 ns high-resolution timer, and an on-chip temperature sensor. The device also integrates a 10-bit ADC, five 16-bit timers plus two 32-bit timers, DMA, and USB 2.0 full-speed on-package variants. Architecturally, the PIC32MX150 combines a Harvard-style MIPS core with a multi-channel DMA engine, a 1.5 Msps 10-bit ADC, and analog comparators on a single die. The 128 KB Flash holds application code, while the 32 KB SRAM supports data buffers for USB and audio streams. PPS allows most digital peripherals to be remapped to any digital I/O pin, simplifying PCB routing. Typical applications include USB audio devices, capacitive-touch human-machine interfaces, low-cost graphics modules with PMP, sensor hubs, and industrial sensor nodes. The 128 KB Flash and 32 KB SRAM are sufficient for protocols such as USB HID/CDC, basic Bluetooth HCI stacks, and small RTOS kernels. When designing, ensure a 10 uF bulk + 0.1 uF bypass capacitor is placed within 6 mm of each VDD/VSS pair, and that traces to the 8 MHz crystal (or 40 MHz internal oscillator configuration) are kept short to minimize EMI and clock jitter. This page synthesizes distributor pricing, drop-in alternatives within the same SSOP-28 footprint, and practical design notes for the PIC32MX150F128BT-V/SS that go beyond the manufacturer datasheet.

Cotação Contato
PIC32MX150F128C-50I/TL - 50MHz 32-bit MCU, 128KB Flash | Microchip
PIC32MX150F128C-50I/TL

PIC32MX150F128C-50I/TL - 50MHz 32-bit MCU, 128KB Flash | Microchip

The Microchip PIC32MX150F128C-50I/TL is a 32-bit MIPS32 M4K microcontroller operating at up to 50MHz, integrating 128KB of Flash program memory and 32KB of SRAM, and housed in a 36-pin VTLA (5x5 mm) package with an exposed thermal pad. The device is designed for 2.5V/3.3V operation, supports industrial temperature ranges, and offers low-power sleep modes for energy-constrained embedded designs. A 32-bit microcontroller is a single-chip computer whose CPU datapath, registers, and ALU are 32 bits wide, enabling higher code density, larger addressable memory spaces, and richer peripheral integration than 8-bit or 16-bit MCUs. The PIC32MX1XX/2XX family positions itself at the low-power, low-cost end of Microchip's 32-bit portfolio, combining a MIPS32 M4K core with peripherals such as a 12-bit Analog-to-Digital converter, USB 2.0 full-speed device and device, I2C, UART, and SPI. Within the broader taxonomy, the part sits inside microcontrollers, then embedded processors, then integrated circuits. Key features of the PIC32MX150F128C-50I/TL include 128KB (128K x 8) of Flash, 32KB of SRAM, a 50MHz maximum operating frequency, peripheral pin select (PPS) for flexible signal routing, multiple DMA channels, and integrated USB 2.0 full-speed support. It also integrates a 12-bit ADC with multiple input channels, comparators, and timers for general-purpose and motor-control applications. The MIPS32 M4K core executes most instructions in a single cycle and supports the MIPS16e ASE for compressed code density. A five-stage pipeline, separate buses for Flash and SRAM, and a hardware multiply/divide unit give the device deterministic performance for real-time control. Power management features include on-chip LDO regulation, multiple idle modes, and a low-power RC oscillator for the watchdog timer, allowing battery-backed designs to retain responsiveness while minimizing quiescent draw. Typical applications include USB peripherals, industrial control panels, low-cost graphical user interfaces, audio processing front-ends, sensor hubs, and small form-factor IoT edge nodes. The exposed pad VTLA-36 package is well matched to compact PCB assemblies where board space is constrained. Designers should note that this part operates from 2.3V to 3.6V and requires careful decoupling near the VDDCORE pins. The peripheral pin select function allows remapping of most digital peripherals to any remappable I/O, simplifying PCB layout. Programming and debug are performed through Microchip's standard 2-wire ICSP interface using MPLAB X IDE and a PICkit or ICD debugger. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application guidance, and design considerations not aggregated in the full or product page, helping engineers accelerate selection and integration.

Cotação Contato
PIC32MX150F128C-I/TL - 32-bit MIPS MCU, 128KB Flash | Microchip
PIC32MX150F128C-I/TL

PIC32MX150F128C-I/TL - 32-bit MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC32MX150F128C-I/TL is a 32-bit microcontroller from the PIC32MX family featuring a MIPS32 M4K core operating at 40 MHz, with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 36-pin VTLA (5x5 mm) exposed-pad package. The device integrates rich connectivity (I2C, IrDA, LINbus, PMP, SPI, UART/USART) and on-chip peripherals for audio, graphics, USB, and advanced analog signal handling. Its 40 MHz core delivers up to 1.56 DMIPS per MHz, providing high deterministic performance for embedded control and signal processing tasks. A PIC32MX microcontroller is a 32-bit MIPS-based MCU that bridges the gap between traditional 8/16-bit controllers and higher-cost application processors. It belongs to the broader hierarchy of MCU -> embedded controller -> microcontroller -> semiconductor IC. The 32-bit MIPS core, combined with ample Flash and SRAM, makes the PIC32MX series well-suited to GUI, USB, and connectivity-heavy products where 8-bit controllers run out of headroom. The PIC32MX1XX/2XX family specifically targets cost-sensitive audio/graphics peripherals with USB OTG and advanced analog. Key features include 21 general-purpose I/O pins, 4 DMA channels with automatic data-size detection, five 16-bit general-purpose timers, two UART and two I2C modules, separate PLLs for CPU and USB clocks, Peripheral Pin Select (PPS) for flexible signal routing, a configurable watchdog timer with on-chip low-power RC oscillator, and multiple low-power modes. The PIC32MX150F128C operates from 2.3 V to 3.6 V and supports an industrial temperature range of -40C to +85C. Technically, the part is CMOS-process-based with integrated 8-channel 10-bit ADC, comparators, RTCC, CTMU, and USB 2.0 full-speed OTG. The bus matrix, prefetch buffer, and 4-channel DMA accelerate memory-moved data acquisition with minimal CPU intervention, while PPS remaps digital peripherals to almost any I/O pin, easing PCB layout. Typical applications include USB audio peripherals, low-cost graphics HMI, sensor hubs, home automation controllers, and small industrial control nodes. The 36-pin VTLA package and rich peripherals also suit wearable designs, capacitive-touch human interfaces, and battery-powered IoT endpoints where 32-bit performance and USB connectivity are required. When designing, plan I/O budgeting around the 21 available GPIO pins and use PPS to remap peripherals for routing simplicity. Pay attention to decoupling and to grounding the exposed thermal pad for thermal and EMI performance. This page consolidates distributor pricing, validated drop-in alternatives, and practical design notes not directly aggregated in the manufacturer datasheet, helping procurement and firmware teams make informed decisions.

Cotação Contato
PIC32MX150F128C-V/TL - 32-bit MCU 128KB Flash 40MHz | Microchip
PIC32MX150F128C-V/TL

PIC32MX150F128C-V/TL - 32-bit MCU 128KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX150F128C-V/TL is a 32-bit microcontroller built on the MIPS32 M4K core, delivering 40 MHz of processing performance with 128 KB of Flash program memory and 32 KB of SRAM, all housed in a 36-pin VTLA (5x5 mm) package. It targets low-cost, low-power embedded applications requiring USB, audio/graphics peripherals, and advanced analog. The device is AEC-Q100 qualified for automotive designs and operates from a 2.3V to 3.6V supply. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, ADC, communication interfaces, and I/O. The PIC32MX family sits within Microchip's broader 32-bit portfolio (PIC32 > MIPS MCU > embedded processor > semiconductor IC), offering a balance of performance, peripherals, and power efficiency for connected embedded systems. Key features include five 16-bit timers, a 10-bit 1 Msps ADC with up to 16 channels, two UART, two I2C, two SPI, PMP (Parallel Master Port), USB 2.0 full-speed device/host/OTG, peripheral pin select (PPS) for flexible signal routing, RTCC, CTMU (charge time measurement unit) for capacitive touch, and up to 21 general-purpose I/O lines. Internal 8 MHz and 32 kHz oscillators reduce external component count. Architecturally, the M4K core is a 5-stage pipeline Harvard architecture delivering 1.56 DMIPS/MHz. Separate PLLs drive the system clock and USB clock, enabling flexible baud-rate generation. A 4-channel DMA engine offloads data movement to lower CPU load. Code is programmed via ICSP (In-Circuit Serial Programming) or JTAG using any PGECx/PGEDx pair. Typical applications include USB HID peripherals, sensor interfaces with capacitive touch, automotive body controllers, audio playback devices, simple graphics displays, and low-cost IoT nodes. The USB, RTCC, and CTMU peripherals make it well-suited for connected sensor hubs and HMI subsystems. Design tip: ensure all VDD and VSS pins are connected and decoupled with 100 nF ceramic capacitors placed close to the package. For USB applications, the VUSB pin requires a 100 nF bypass to ground and a 10 uF bulk capacitor. This page synthesizes distributor pricing, AEC-Q100 qualification status, drop-in alternatives within the PIC32MX family, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
PIC32MX150F128CT-50I/TL - 32-bit MCU 128KB Flash 50MHz | Microchip
PIC32MX150F128CT-50I/TL

PIC32MX150F128CT-50I/TL - 32-bit MCU 128KB Flash 50MHz | Microchip

The Microchip Technology PIC32MX150F128CT-50I/TL is a 32-bit MIPS32 M4K microcontroller operating at 50MHz with 128KB of FLASH program memory and 32KB of SRAM, housed in a 36-pin VTLA (5x5 mm) package with an exposed thermal pad. The device operates from a 2.3V to 3.6V supply and supports industrial-grade temperature range from -40C to +85C. A PIC32MX series microcontroller is a 32-bit MCU based on the MIPS32 M4K core, designed by Microchip for embedded applications requiring higher performance than 16-bit PIC microcontrollers. Within the broader system hierarchy, PIC32MX devices sit between PIC24F (16-bit) and PIC32MK/MZ (32-bit high-performance) families, falling under the umbrella of MIPS-based 32-bit microcontrollers and the wider category of embedded microcontrollers. The PIC32MX1XX/2XX 28/36/44-pin family specifically targets cost-sensitive applications requiring USB, advanced peripherals, and graphics/audio interfaces. The M4K core executes most instructions in a single cycle, giving the 50MHz part 50 Dhrystone MIPS of performance. Key features of the PIC32MX150F128CT-50I/TL include up to 25 I/O pins, two UART modules, two I2C modules, two SPI modules, a Parallel Master Port (PMP), 10-bit ADC with up to 12 channels, 5 PWM, Peripheral Pin Select (PPS) functionality for flexible pin assignment, hardware DMA with up to 4 channels, and JTAG programming/debug interface. The exposed pad on the VTLA package improves thermal dissipation for higher-current applications. Architecturally, the device integrates a Harvard architecture with separate instruction and data paths, configurable interrupt controller supporting up to 64 interrupt sources with 7 priority levels, and multiple low-power sleep modes (idle, sleep, deep-sleep) for power-constrained applications. The integrated USB 2.0 full-speed controller supports both device and host/OTG modes when paired with proper external components. Typical applications include industrial automation (PLCs, motor control interfaces), consumer audio/graphics interfaces with USB connectivity, USB peripherals such as mice, keyboards, and Human Interface Devices (HIDs), portable data loggers, sensor hubs, and low-cost graphics display controllers. The combination of 128KB Flash, 32KB RAM, USB, and PMP makes it suitable for applications traditionally served by more expensive Cortex-M0+ devices. A key design consideration is power supply decoupling. Place a 0.1uF ceramic bypass capacitor as close as possible to each VDD/VDDCORE pin and a bulk 10uF tantalum or ceramic capacitor near the package to ensure stable operation. Use the exposed pad as a thermal dissipation path by soldering it to a copper pour on the PCB. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MX family, and practical design notes not found in the manufacturer datasheet, providing actionable engineering guidance for embedded system designers selecting this MCU.

Cotação Contato
PIC32MX150F128CT-I/TL - 32-bit MCU, 128KB Flash, 40MHz | Microchip
PIC32MX150F128CT-I/TL

PIC32MX150F128CT-I/TL - 32-bit MCU, 128KB Flash, 40MHz | Microchip

The Microchip PIC32MX150F128CT-I/TL is a 32-bit MIPS M4K microcontroller with 128KB Flash and 32KB SRAM operating at 40MHz, housed in a 36-pin VTLA (5x5 mm) package with exposed thermal pad. The device features 21 general-purpose I/O lines, integrated USB 2.0 full-speed OTG, and CTMU/RTCC peripherals. A 32-bit PIC microcontroller (MCU) is a programmable embedded processor that executes instructions on a 32-bit datapath, enabling higher computational throughput than 8-bit or 16-bit MCUs while remaining deterministic for real-time control. The PIC32 family sits at the top of Microchip's PIC hierarchy under the broader microcontroller taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 -> PIC32MX performance series. The M4K core implements the MIPS32 release-2 instruction set with hardware multiply/divide, single-cycle hardware MAC, and 5-stage pipeline, delivering 1.56 DMIPS/MHz and 40 MHz operation suitable for audio decoding, graphics rendering, and USB-connected peripherals. Key features include 128KB single-cycle Flash with prefetch, 32KB SRAM, hardware Multiply/Divide, USB 2.0 full-speed OTG with on-chip transceiver, four hardware DMA channels, five 16-bit timers, two UART modules, two I2C modules, and up to 13 analog input channels on a 10-bit ADC. Peripherals are routed via Peripheral Pin Select (PPS), allowing flexible function placement across I/O pins. Five power-management modes (Run, Idle, Sleep, Deep Sleep, VBAT) minimize quiescent draw for battery-connected designs. The PIC32MX150F128CT-I/TL integrates a 4-channel hardware DMA engine that offloads memory-to-peripheral transfers without CPU intervention, freeing core cycles for application logic. Separate PLLs for CPU and USB clocks allow the CPU to run at 40 MHz while maintaining the precise 48 MHz USB clock required by USB 2.0 full-speed. The CTMU (Charge Time Measurement Unit) supports touch-sense, capacitive proximity, and time-of-flight measurements; the RTCC retains a calendar clock from a 32.768 kHz source during deep-sleep. The 36-pin VTLA package exposes a thermal pad for improved theta-JA. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), audio playback with USB streaming, low-cost graphics LCD controllers, capacitive touch user interfaces, sensor hubs, and battery-powered IoT nodes. The integrated USB transceiver and 32KB SRAM make it especially suitable for USB-class devices where discrete USB PHY cost would otherwise inflate the BOM. When designing with this part, route the USB DP/DM traces as a 90-ohm differential pair with matched length, place the 27-ohm series resistors close to the pins, and provide a solid ground reference beneath the traces. The exposed thermal pad must be soldered to a top-layer copper pour with multiple thermal vias to keep junction temperature within limits under USB bus-powered operation. This page synthesizes distributor pricing, drop-in PIC32 alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
PIC32MX150F128CT-V/TL - 32-bit MCU 128KB Flash 40MHz 36-VTLA | Microchip
PIC32MX150F128CT-V/TL

PIC32MX150F128CT-V/TL - 32-bit MCU 128KB Flash 40MHz 36-VTLA | Microchip

The Microchip Technology PIC32MX150F128CT-V/TL is a 32-bit MIPS32 M4K microcontroller running at 40 MHz, integrating 128 KB of Flash program memory and 32 KB of SRAM, and packaged in a 36-pin VTLA (5x5 mm) thermally enhanced QFN with an exposed pad. The -V variant specifies an AEC-Q100-grade operating temperature range of -40C to +105C, while the -T suffix indicates Tape and Reel packaging for high-volume assembly. The device integrates USB 2.0 full-speed On-The-Go, a 10-bit 1 Msps Analog-to-Digital Converter with up to 12 input pins, five 16-bit timers, two UART, two I2C and two SPI peripherals, plus Peripheral Pin Select (PPS) for flexible I/O routing. Microcontrollers (MCUs) are programmable semiconductor devices that integrate a CPU core, memory and a rich set of digital and analog peripherals on a single die. The PIC32MX1xx family specifically targets cost-sensitive, USB-enabled embedded applications by combining a 32-bit MIPS core (linear-regulator-class successor to PIC24/dsPIC) with a 5-volt-tolerant I/O ring and a USB PHY, occupying the tier below higher-end PIC32MX3xx/4xx/5xx/6xx/7xx parts. Key features that differentiate this part include a hardware DMA controller with four channels and automatic data-size detection, two separate PLLs for the CPU and the USB 48 MHz clock, a configurable Watchdog Timer with an on-chip low-power RC oscillator, and multiple low-power modes (Idle, Sleep) that drop quiescent current to microamp levels. The 5-volt-tolerant I/O and Audio/Graphics-compatible PWM/CCP make it well suited for cost-sensitive consumer and industrial Human-Machine Interface boards. Architecture-wise, the PIC32MX1xx is built on a 32-bit MIPS M4K Harvard architecture featuring separate Flash and SRAM buses, a single-cycle hardware multiplier/divider, and a Prefetch Cache that hides Flash wait states. Compared with the older PIC24/dsPIC families, the M4K core executes most instructions in a single cycle and offers significantly higher code density for C workloads, while remaining code-compatible with the MPLAB XC32 toolchain. Typical applications include low-cost USB Human Interface Devices (HID), small audio playback devices using PWM or I2S bridges, graphic LCD control panels, low-end embedded WiFi/BLE gateways, and industrial sensor nodes requiring ADC sampling above 250 kHz. The combination of USB-OTG and 12-bit 1 Msps ADC also opens the door to data-acquisition front-ends and USB-CDC virtual COM ports on factory-floor equipment. When designing with this MCU, note that the VTLA package has an exposed thermal pad that MUST be soldered to the PCB ground plane for proper thermal dissipation and electrical performance. For best USB-2.0 signal integrity, route the D+/D- lines as a 90-ohm differential pair and supply VBUS with a 4.7 uF bulk capacitor per the USB specification. This page synthesizes distributor pricing, drop-in alternatives within the same PIC32MX1xx family, and practical design notes that go beyond the manufacturer datasheet, giving engineers a single reference for evaluation, sourcing and second-source qualification.

Cotação Contato
PIC32MX150F128D-50I/ML - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128D-50I/ML

PIC32MX150F128D-50I/ML - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX150F128D-50I/ML is a 32-bit MIPS M4K microcontroller delivering 50 MHz CPU performance with 128 KB Flash and 32 KB SRAM, housed in a 44-pin QFN (ML) 8x8 mm package with an exposed thermal pad. It is part of the PIC32MX1XX/2XX family targeting low-power, mixed-signal embedded designs with USB, audio, and graphics peripherals. A 32-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, memory, and peripherals on a single silicon die; PIC32MX1XX/2XX devices use the MIPS32 M4K core, placing them in the broader taxonomy of 32-bit microcontrollers -> microcontrollers -> embedded processors -> semiconductors. PIC32MX parts are widely adopted for cost-sensitive 32-bit designs where ARM Cortex-M parts are over-specified. Key features include two I2S/SPI modules for codec and serial audio, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics and external memory interfaces, a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch sensing with 1 ns resolution, on-chip temperature measurement, and USB 2.0 full-speed device/host/OTG. The part operates from 2.5 V or 3.3 V with less than 0.5 mA/MHz active current consumption, suiting portable and USB-powered designs. Architecturally, the M4K core offers single-cycle hardware multiply/divide and a 5-stage pipeline, providing deterministic interrupt latency. The 128 KB Flash and 32 KB SRAM are accessible through the unified 32-bit bus, while the PMP module can address up to 16 MB of external memory in master mode - useful for graphics and audio buffer extensions. Typical applications include USB audio devices (headsets, dongles, MIDI controllers), capacitive touch user interfaces (mTouch sliders and buttons), low-cost graphics HMI with PMP-connected TFT panels, industrial control front-ends with USB connectivity, and portable consumer electronics requiring 32-bit math without ARM licensing overhead. When designing with this device, plan I/O carefully: PPS lets remap most digital peripherals to alternate pins, but analog and oscillator pins are fixed. Use the exposed pad (EP) of the QFN-44 package as the primary thermal and ground return path - it must be soldered to a continuous copper pour for rated performance. This page synthesizes DigiKey distributor pricing, Microchip family drop-in alternatives from the same PIC32MX1XX/2XX series, and practical design notes - information beyond the manufacturer datasheet cover sheet.

Cotação Contato
PIC32MX150F128D-50I/TL - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128D-50I/TL

PIC32MX150F128D-50I/TL - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX150F128D-50I/TL is a 32-bit MIPS M4K microcontroller running at 50 MHz with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 44-pin VTLA (6x6 mm) surface-mount package. It is part of the PIC32MX1XX/2XX family, which integrates USB 2.0 (Full-Speed), two I2S/SPI modules, a Parallel Master Port (PMP), a 10-bit ADC, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive sensing. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a CPU core, volatile memory (SRAM), non-volatile memory (Flash), and multiple peripheral interfaces on a single silicon die. Within the broader hierarchy of microcontrollers, the PIC32MX family belongs to the 32-bit MCU category, itself a sub-category of microcontrollers, embedded processors, and ultimately semiconductors. 32-bit MCUs are typically chosen over 8-bit or 16-bit parts when applications require more than 64 KB of code space, hardware USB, or graphics-oriented peripherals such as PMP for TFT displays. Key features of the PIC32MX150F128D-50I/TL include a low active current of less than 0.5 mA/MHz at full speed, Peripheral Pin Select (PPS) for flexible peripheral-to-pin mapping, two I2S/SPI modules for codec and serial communication, PMP for graphics interfaces, support for mTouch capacitive touch buttons and sliders, and a high-resolution 1 ns time-measurement capability. The device operates from 2.3 V to 3.6 V and supports industrial temperature range parts (-40C to +85C). The architecture combines a MIPS32 M4K RISC core with a 5-stage pipeline, Harvard bus structure, single-cycle hardware multiply/divide, and tightly coupled peripherals. PPS remapping allows designers to assign peripherals to available I/O pins without redesigning the PCB. The 10-bit ADC provides up to 1 Msps conversion with on-chip sample-and-hold, and the CTMU enables capacitive touch measurement, time-of-flight, and accurate pulse generation. Typical applications include USB audio devices, mTouch capacitive touch panels, low-cost graphics displays via PMP, sensor hubs, and general-purpose embedded control. The wide peripheral mix makes this MCU particularly attractive for cost-sensitive consumer electronics requiring USB plus graphics in a single chip. When designing with the PIC32MX150F128D-50I/TL, plan the decoupling network with a 0.1 uF capacitor on each VDD pin and a bulk 4.7 uF to 10 uF tantalum/ceramic capacitor near the regulator. The VTLA package has an exposed thermal pad that must be soldered to the ground plane for mechanical stability and thermal dissipation. This page synthesizes distributor pricing, drop-in pin-compatible alternatives in the same 44-pin VTLA footprint, comparison parameters, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
PIC32MX150F128D-I/ML - 32-bit MCU 128KB Flash 32KB RAM 44-QFN | Microchip
PIC32MX150F128D-I/ML

PIC32MX150F128D-I/ML - 32-bit MCU 128KB Flash 32KB RAM 44-QFN | Microchip

The Microchip Technology PIC32MX150F128D-I/ML is a 32-bit MIPS M4K RISC microcontroller with 128 KB Flash, 32 KB SRAM, and USB 2.0 full-speed support, housed in a 44-pin QFN (ML) 8x8 mm package. It runs at up to 40 MHz (industrial grade, -40C to +85C) with sub-0.5 mA/MHz active current, and integrates Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics interfaces, two I2S/SPI modules for codec connectivity, and a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch and 1 ns high-resolution time measurement. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, ADCs, and communication interfaces. The PIC32MX1XX/2XX family uses the MIPS32 M4K core, placing these parts in the microcontroller -> 32-bit MCU -> MIPS-based MCU -> embedded controller taxonomy, and within Microchip's broader portfolio they sit alongside the PIC24 and dsPIC families as general-purpose embedded controllers with DSP-class throughput. Key features of the PIC32MX150F128D-I/ML include five 16-bit timers/counters, two I2C ports, two UART ports, two SPI/I2S ports, a 10-bit 1 Msps ADC with up to 28 analog inputs, an on-chip temperature sensor, a 5-bit DAC, and 34 digital I/O pins. PPS allows remapping of digital peripheral signals to most I/O pins, simplifying PCB routing in densely packed designs. Architecturally, the part uses a 5-stage pipeline MIPS32 M4K core with hardware multiply/divide and a Prefetch Cache Module that fetches 16-bit words from Flash and presents 32-bit instructions to the core. The dual-bank Flash with live-update support enables in-field firmware upgrades, and the 32 KB SRAM provides ample headroom for USB stacks, graphics framebuffers, and audio processing buffers. Typical applications include USB audio devices (USB speakers, headphones, and headsets), low-cost graphics HMI with PMP-driven TFT panels, capacitive touch key/slider front panels using CTMU, industrial control with on-chip 10-bit ADC, and consumer devices requiring USB connectivity. The wide peripheral mix and USB make the part a single-chip solution for many USB+graphics products. A key design consideration is that the 44-QFN part exposes fewer I/O than the 64-pin variants; designers needing more pins should consider the PIC32MX150F128D-I/PT (44-TQFP, same pinout assignment) or migrate to PIC32MX250/270 64-pin devices for additional peripherals. Ensure VUSB decoupling follows the USB specification and the VBAT/AVDD rails are properly sequenced. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and design notes drawn from Microchip datasheets and application notes that are not collated on the manufacturer product page alone.

Cotação Contato
PIC32MX150F128D-I/PT - 32-bit MCU 128KB Flash 40MHz | Microchip
PIC32MX150F128D-I/PT

PIC32MX150F128D-I/PT - 32-bit MCU 128KB Flash 40MHz | Microchip

The Microchip PIC32MX150F128D-I/PT is a 32-bit RISC microcontroller from the PIC32MX1XX/2XX family, featuring a MIPS32 M4K core running up to 40 MHz, 128 KB of Flash program memory, and 32 KB of SRAM, packaged in a 44-pin TQFP (10x10 mm). It operates from a 2.3 V to 3.6 V supply, integrates 21 general-purpose I/O pins, and consumes less than 0.5 mA/MHz in active mode for energy-efficient embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals. The PIC32MX1XX/2XX family specifically targets cost-sensitive 32-bit applications where MIPS performance, USB connectivity, and audio/graphics peripherals are required. It sits within the broader hierarchy: microcontroller -> embedded processor -> semiconductor, competing directly with ARM Cortex-M0/M3 based MCUs from STMicroelectronics and NXP. Key features include two I2S/SPI modules for codec and serial audio interfaces, a Parallel Master Port (PMP) for graphics and external memory, Peripheral Pin Select (PPS) for flexible signal routing, a 10-bit 1 Msps ADC with up to 13 channels, and a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch and high-resolution 1 ns time measurement. The device also integrates full-speed USB 2.0 (device/host/OTG), five 16-bit timers, two UART/I2C/SPI peripherals, and an on-chip temperature sensor for thermal management. Architecturally, the PIC32MX150F128D uses a Harvard-style 5-stage pipeline M4K core with single-cycle multiply and hardware divide, achieving 1.56 DMIPS/MHz. The Flash controller supports pre-fetch buffering for zero-wait-state execution up to 40 MHz, while the integrated DMA controller offloads data movement between peripherals and memory. This combination delivers deterministic real-time response suitable for USB audio, control panels, and graphics HMI applications. Typical applications include USB audio DAC interfaces, low-cost graphics HMIs with PMP-driven LCDs, capacitive touch user interfaces, industrial sensor hubs with USB connectivity, consumer medical devices, and educational development platforms. Its combination of USB, audio I2S, and graphics PMP makes it well suited for multimedia-rich embedded products. When designing with this MCU, allocate the 44-pin budget carefully: the USB pins require external 48 MHz clock or crystal and 27% accuracy internal PLL, and PPS reassignment must respect peripheral availability per pin. Use MPLAB Harmony or MCC for code generation to avoid timing errors in USB enumeration. This page synthesizes distributor pricing, drop-in alternatives in the same TQFP-44 package, and practical design notes not found in the standalone manufacturer datasheet, providing engineering context for rapid design-in.

Cotação Contato
PIC32MX150F128D-I/TL - 40MHz 128KB Flash 32-bit MCU | Microchip
PIC32MX150F128D-I/TL

PIC32MX150F128D-I/TL - 40MHz 128KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX150F128D-I/TL is a 32-bit MIPS32 M4K microcontroller with 128 KB flash and 32 KB SRAM, operating up to 40 MHz, housed in a 44-pin VTLA (6x6 mm) surface-mount package. A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU core, memory and peripherals on a single die, executing instructions of 32-bit width for higher throughput than 8/16-bit MCUs. PIC32MX devices belong to the PIC32 family within Microchip's broader microcontroller hierarchy (MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MX -> PIC32MX150 series), targeting low-power connected and embedded applications with USB, audio and graphics interfaces. Key features of the PIC32MX150F128D-I/TL include 128 KB flash program memory, 32 KB SRAM, 40 MHz maximum CPU clock, two I2S/SPI modules, Peripheral Pin Select (PPS), Parallel Master Port (PMP) for graphics, a 10-bit 1 Msps ADC with up to 28 channels, four 16-bit timers, two comparators and a Charge Time Measurement Unit (CTMU) for capacitive touch or 1 ns time measurement. The MIPS32 M4K core delivers less than 0.5 mA/MHz active current, supporting battery-sensitive designs. The architecture combines a Harvard-style bus with tightly-coupled peripherals, deterministic interrupt latency and hardware DMA. Operating from 2.3V to 3.6V across -40 C to +105 C, it integrates USB 2.0 full-speed device/host/OTG, I2C, UART, SPI and PMP for richer connectivity than smaller-pin PIC32MX1xx variants. Typical applications include USB peripherals, audio interfaces with I2S codecs, low-cost graphics HMI with PMP, capacitive-touch keypads using CTMU, industrial control nodes and consumer devices requiring USB connectivity in a compact 44-pin footprint. Designers should plan PPS remapping to assign digital functions to physical pins without PCB rework. Use MPLAB X IDE with XC32 compiler and Harmony framework for firmware development. This page synthesizes distributor pricing, drop-in alternatives and design notes not found in the manufacturer datasheet, giving engineers a single source for parametric and sourcing decisions as of 2026-10-01.

Cotação Contato
PIC32MX150F128D-V/PT - 32-bit MCU 128KB Flash USB 44-TQFP
PIC32MX150F128D-V/PT

PIC32MX150F128D-V/PT - 32-bit MCU 128KB Flash USB 44-TQFP

The Microchip Technology PIC32MX150F128D-V/PT is a 32-bit RISC microcontroller based on the MIPS32 M4K core, operating at 40 MHz with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 44-pin TQFP package (10x10 mm, 0.8 mm pitch). It integrates a USB 2.0 full-speed OTG controller, two I²S/SPI modules for audio codec interfacing, and a Parallel Master Port (PMP) for graphics, while drawing less than 0.5 mA/MHz from a 2.3 V to 3.6 V supply. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The PIC32MX1xx family specifically targets cost-sensitive embedded designs that require USB connectivity, audio/graphics interfaces, and a richer analog feature set than 8-bit or 16-bit MCUs can offer, sitting between PIC24/dsPIC33 and the higher-end PIC32MX3xx/4xx families in the Microchip portfolio. Key features include 128 KB (131 KB per MicrochipUSA) of Flash with self-programmable flash, 32 KB of SRAM with cache, 21 general-purpose I/O pins with Peripheral Pin Select (PPS) remapping, and an on-chip 1 Msps 10-channel 10-bit ADC. It also embeds five 16-bit general-purpose timers, a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing, an analog comparator, and an on-chip temperature sensor for board-level monitoring. Architecturally, the M4K core executes most instructions in a single cycle with a 5-stage pipeline, supports hardware multiply/divide, and provides separate Flash and SRAM buses so the CPU can fetch instructions while DMA moves peripheral data. The USB OTG controller, integrated voltage regulator, and wide peripheral mix reduce external component count, while PPS allows pin-function remapping to simplify PCB routing in densely populated designs. Typical applications include USB audio interfaces and MIDI peripherals, low-cost HMI panels with the PMP driving LCDs, capacitive-touch user interfaces using CTMU, industrial control nodes requiring USB-CDC bridges, and low-power sensor hubs where the <0.5 mA/MHz figure enables battery-friendly duty-cycled designs. When designing with this MCU, leave room in the Flash budget for the USB stack and any bootloader. Place the 2.5 V USB transceiver bypass capacitors per datasheet recommendations, and use the PPS feature to route I²S, UART, or timer channels to convenient pins without re-spinning the schematic. This page synthesizes distributor pricing, parametric depth, same-brand pin-compatible alternatives, and practical considerations that are not assembled on any single manufacturer or distributor page.

Cotação Contato
PIC32MX150F128DT-50I/ML - 32-bit 50MHz MCU, 128KB Flash, 44-QFN | Microchip
PIC32MX150F128DT-50I/ML

PIC32MX150F128DT-50I/ML - 32-bit 50MHz MCU, 128KB Flash, 44-QFN | Microchip

The Microchip PIC32MX150F128DT-50I/ML is a 32-bit RISC microcontroller based on the MIPS32 M4K core, featuring 128 KB of Flash program memory, 32 KB of SRAM, and a maximum CPU clock of 50 MHz, housed in a 44-pin QFN-EP (8x8 mm) package with exposed thermal pad. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and programmable peripherals. The PIC32MX family sits in the hierarchy: 32-bit MCU -> MIPS32 M4K CPU -> PIC32MX sub-family -> Microchip 32-bit microcontroller portfolio. Within Microchip's catalog, this part is positioned in the PIC32MX1XX/2XX 28/36/44-pin general-purpose sub-family optimized for audio, graphics, USB, and analog-intensive applications. Key features include two I2S/SPI modules for audio codec interfaces, Peripheral Pin Select (PPS) for flexible pin-function routing, a Parallel Master Port (PMP) for graphics and external memory, mTouch capacitive-touch hardware support, a 1 ns resolution time-measurement capture input, an on-chip temperature sensor, and sub-0.5 mA/MHz active current consumption for low-power designs. The 44-QFN-EP package with exposed pad provides excellent thermal dissipation for the 50 MHz performance. The PIC32MX150F128DT-50I/ML uses a 5-stage pipeline Harvard architecture with a hardware Multiply/Divide unit, supporting the MIPS32 instruction set. With a 2.3 V to 3.6 V supply, 50 MHz operation delivers up to 50 MIPS throughput. The 44-pin variant exposes up to 35 GPIOs via PPS, two I2C, two SPI, two UART, an ADC module with up to 28 channels, and a 16-bit Parallel Master Port. Typical applications include USB audio interfaces, color graphics HMI with PMP-connected LCD, capacitive touch control panels, low-power industrial sensing nodes, and consumer audio peripherals such as Bluetooth speakers and digital headsets. The mTouch and I2S modules directly serve audio and human-input use cases. When designing with this part, ensure the exposed pad is soldered to a continuous ground copper pour for proper thermal dissipation. Decouple VDD with 0.1 µF + 1 µF ceramic capacitors placed within 5 mm of each supply pin, and route the 50 MHz crystal traces short and symmetrically. This page synthesizes drop-in alternative listings, distributor pricing snapshots, and practical design notes that complement the manufacturer datasheet and are not duplicated elsewhere on the open web.

Cotação Contato
PIC32MX150F128DT-50I/PT - 50MHz 128KB Flash 32-bit MCU | Microchip
PIC32MX150F128DT-50I/PT

PIC32MX150F128DT-50I/PT - 50MHz 128KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX150F128DT-50I/PT is a 32-bit MIPS M4K RISC microcontroller with 128 KB Flash and 32 KB RAM, running at up to 50 MHz, housed in a 44-pin TQFP (10x10 mm) package. It operates from 2.3V to 3.6V and integrates two I2S/SPI modules, USB 2.0 full-speed, 10-bit ADC with 13 channels, and a Parallel Master Port (PMP) for graphics. An MCU (Microcontroller Unit) is a single-chip computer containing a CPU core, program and data memory, plus integrated peripherals such as ADC, timers, and communication interfaces. The PIC32MX family is part of the broader 32-bit microcontroller category, which itself sits within embedded processing and semiconductor ICs. Microchip's PIC32MX1xx/2xx/3xx/4xx family targets cost-sensitive, low-power embedded applications requiring DSP-like MIPS performance at low active current below 0.5 mA/MHz. Key features include Peripheral Pin Select (PPS) for flexible I/O mapping, five 16-bit timers, two comparators, two UARTs, and hardware mTouch capacitive touch support. The integrated 1.6 ns resolution timer captures high-speed events. The 50 MHz core delivers 50 MIPS, while the dedicated DMA engine offloads data movement between peripherals and memory, freeing the CPU for application code. The architecture combines a MIPS32 M4K core with Harvard-style bus topology, on-chip voltage regulation, and JTAG/ICSP debug. USB 2.0 full-speed with on-chip transceiver eliminates external PHY cost for HID, CDC, and basic device-class applications. PMP supports direct LCD/glucose-display parallel interfaces common in medical and industrial HMI designs. Typical applications include USB peripherals, industrial control panels with PMP-driven LCDs, audio playback using I2S codecs, capacitive touch user interfaces, sensor hubs with DMA-driven ADC acquisition, and low-power consumer devices requiring deterministic real-time response. The compact 10x10 mm TQFP and integrated USB simplify PCB layout and BOM cost. When designing with this device, ensure VDD decoupling uses 100 nF ceramic capacitors within 5 mm of each VDD/VSS pair, and that the 8 MHz internal oscillator is configured for the active system clock. Leave unused pins configured as outputs low to minimize current draw. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
PIC32MX150F128DT-50I/TL - 32-bit MCU, 128KB Flash, 50MHz | Microchip
PIC32MX150F128DT-50I/TL

PIC32MX150F128DT-50I/TL - 32-bit MCU, 128KB Flash, 50MHz | Microchip

The Microchip Technology PIC32MX150F128DT-50I/TL is a 32-bit MIPS32 M4K RISC microcontroller featuring 128KB of Flash program memory, 32KB of SRAM, and a maximum operating frequency of 50MHz, packaged in a 44-pin VTLA (6x6 mm) surface-mount land-grid-array form factor with an exposed thermal pad. The part operates from a 2.3V to 3.6V supply, integrates Peripheral Pin Select (PPS) for flexible signal routing, and includes two I2S/SPI modules, a Parallel Master Port (PMP), a 1 Msps 10-bit ADC with up to 28 channels, five 16-bit timers, and on-chip mTouch capacitive-touch support. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into one package. Within the broader hierarchy, the PIC32MX family belongs to the MIPS32 architecture class of embedded controllers, which sit above 8-bit/16-bit MCUs in raw compute performance and below Cortex-M class parts in some mixed-signal features. The MX150F128D sub-family is positioned as a low-cost, USB-capable, graphics-capable general-purpose MCU line for cost-sensitive applications. Key features distinguishing the PIC32MX150F128DT-50I/TL include 128KB Flash and 32KB SRAM, full-speed USB 2.0 device/host/OTG, an integrated 10-bit 1 Msps ADC, hardware crypto accelerator for AES/DES, and sub-0.5 mA/MHz active current consumption that supports long battery life in portable designs. The PPS remap block lets each peripheral signal be assigned to one of several physical pins, eliminating fixed-pin conflicts and simplifying PCB layout. Architecturally, the device uses a 5-stage MIPS32 M4K pipeline, runs at 50MHz (with 40MHz also supported at industrial temperature), and pairs the core with a multi-channel DMA controller to offload memory-move tasks. The 44-pin VTLA package delivers a 0.65mm pitch and 0.9mm height for compact designs, while the exposed pad lowers junction-to-ambient thermal resistance. Typical applications include USB peripherals (HID, CDC, mass-storage), small graphical user interfaces via PMP-driven TFT/STN displays, audio playback through I2S codecs, capacitive-touch control panels, and industrial sensor hubs. The 50MHz clock speed also supports lightweight TCP/IP stacks and modest RTOS workloads. When designing with this MCU, prioritize firmware that uses the DMA to sustain I2S audio streams and reserve a PPS mapping table to avoid signal collisions. Plan for a 3.3V LDO with at least 100mA headroom and provide adequate decoupling on each VDD/VSS pair to maintain ADC accuracy. This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes not consolidated in the manufacturer datasheet, offering an engineer-oriented decision aid.

Cotação Contato
PIC32MX150F128DT-I/PT - 32-bit MCU 128KB Flash 40MHz 44-TQFP | Microchip
PIC32MX150F128DT-I/PT

PIC32MX150F128DT-I/PT - 32-bit MCU 128KB Flash 40MHz 44-TQFP | Microchip

The Microchip Technology PIC32MX150F128DT-I/PT is a 32-bit MIPS32 M4K RISC microcontroller with 128 KB Flash, 32 KB SRAM, and a 40 MHz maximum operating frequency, housed in a 44-pin TQFP (10x10 mm) package. It supports 2.3V to 3.6V operation, delivers five 16-bit timers, two I2S/SPI modules, USB, and advanced analog peripherals including a 1 Msps 10-bit ADC. What is a 32-bit microcontroller? A 32-bit microcontroller is an integrated circuit containing a CPU with a 32-bit data path, program and data memory, and peripherals such as timers, communication controllers, and analog interfaces on a single die. In the embedded hierarchy, the PIC32MX150F128D sits between 8/16-bit MCUs (PIC16, PIC24) and high-performance Cortex-M parts, balancing MIPS/dollar with deterministic interrupt response for mid-range embedded designs. Key features include 128 KB Flash, 32 KB SRAM, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, 1 ns high-resolution time measurement, on-chip temperature sensor, and sub-0.5 mA/MHz active current. The integrated USB 2.0 full-speed device controller and two I2S/USB audio streaming paths suit embedded audio applications. The PIC32MX150F128D is built on a Harvard architecture with a 5-stage pipeline M4K core, prefetch cache to mask Flash latency, and bus matrix arbitration for parallel peripheral access. The 1.56 DMIPS/MHz core delivers 62 DMIPS at 40 MHz, enabling real-time DSP-style filtering at modest clock speeds, compared to older PIC24 parts at 16 MIPS. Typical applications include low-cost USB audio devices, graphics touch panels using PMP, IoT sensor nodes, and industrial HMI panels. The 128 KB Flash and 32 KB SRAM comfortably host a USB stack plus application logic, while the integrated ADC and op amps reduce external BOM. When designing with this part, ensure the Vcap pin has a low-ESR 10 uF decoupling capacitor, since internal core regulation requires it for stable operation. Failure to populate Vcap causes erratic reset behavior. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato