Circuitos Integrados

S912XET512J3VALR

S912XET512J3VALR - 16-bit S12X MCU 512KB Flash 50MHz | NXP | 112-LQFP

The NXP S912XET512J3VALR is a 16-bit HCS12X family microcontroller featuring a 50 MHz S12X core with 512 KB on-chip program Flash and a hardware XGATE co-processor, housed in a 112-pin LQFP (20x20 mm) package. It supports 1.8V, 2.8V, and 5V operation, delivers automotive-grade temperature performance from -40C to +105C, and is AEC-Q100 qualified for safety-critical automotive applications. An HCS12X microcontroller is a 16-bit MCU family that extends the classic S12 architecture with an enhanced S12X CPU core plus a peripheral co-processor (XGATE) capable of offloading interrupt-driven tasks. Microcontrollers in this category sit under the broader hierarchy of embedded processors -> microcontrollers -> 16-bit MCUs -> automotive MCUs, and they are differentiated from 32-bit ARM Cortex-M parts by their deterministic interrupt latency, large Flash-to-pin ratio, and integrated CAN/LIN/SPI peripherals suited to body and chassis ECUs. Key features include 512 KB Flash (512K x 8) with 4 KB EEPROM emulation, 32 KB RAM, an XGATE co-processor for virtual peripherals, a 12-bit ADC with 3 us conversion time, an Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), and a Real Time Interrupt (RTI). The device integrates a Memory Protection Unit supporting supervisor/user modes for system integrity, a four-channel PWM, two SCI, two SPI, an I2C, and multiple CAN 2.0A/B controllers. Operating voltage supports 1.8V core / 2.8V or 5V I/O domains. The S12X CPU core delivers 32-bit-style instruction performance while retaining 16-bit code density. XGATE runs at twice the bus speed (up to 100 MHz) and offloads interrupt service routines, freeing the main CPU for control-loop computation. The on-chip voltage regulator and PLL simplify external power design - typically only a single 5V supply and decoupling capacitors are required at the PCB. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, steering-angle sensors, seat and mirror controllers, and CAN/LIN gateway nodes. The wide operating voltage range also supports industrial CAN-node designs and 24V truck body electronics with external regulation. AEC-Q100 qualification and PPAP documentation support OEM source approval. Designers should pair the MCU with a 100 nF + 4.7 uF decoupling network on each VDD pin and route the ECLK/XIRQ/Reset signals with short traces. For CAN bus applications, place a TJA1050 or TJA1042 transceiver within 50 mm of the CAN pins and provide a 120 ohm split termination. The internal PLL requires a 4-16 MHz crystal with the recommended load capacitance listed in the datasheet. This page synthesizes distributor pricing, drop-in alternatives within the S12X family, and practical design notes not assembled in the manufacturer datasheet alone. Engineers evaluating long-life automotive programs will find the same-package alternatives list particularly useful for second-sourcing.

USD $7,10 Em estoque

S912XHZ256F1VAG

S912XHZ256F1VAG - 16-bit MCU, S12X, 256KB Flash, 80MHz | NXP

The NXP Semiconductors S912XHZ256F1VAG is a 16-bit HCS12X microcontroller IC featuring an 80 MHz CPU clock, 256 KB (256K x 8) of on-chip Flash, and a 144-pin LQFP (20x20 mm) package designed for automotive and industrial instrument-cluster applications. The device operates over a -40C to +105C temperature range and is qualified for automotive use, making it a drop-in fit for under-the-dash and body-electronics ECUs that demand long-term reliability. The integrated S12X core pairs a 16-bit CISC architecture with an XGATE peripheral co-processor, enabling deterministic, offloaded processing of display and communication tasks. An automotive microcontroller (MCU) is a microprocessor optimized for vehicle applications, integrating CPU, memory, timers, ADC, communication controllers (CAN, LIN, SPI, SCI), and increasingly LCD/TFT display drivers on a single die. Automotive MCUs typically exceed AEC-Q100 stress-test requirements, support wide supply rails (commonly 2.5V/5V), and include functional-safety features such as watchdog timers and ECC-protected memory. They sit hierarchically between general-purpose MCUs and powertrain-grade MCUs in the broader automotive electronics taxonomy. Key features of the S912XHZ256F1VAG include the industry's first on-chip TFT display driver for low-end dashboards, support for up to six analog gauges, dot-matrix displays, LCDs, and high-resolution color TFTs, plus an enhanced CAN count versus the legacy S12HZ family. Memory resources include 256 KB Flash and 12 KB RAM alongside 4 KB EEPROM emulation, while peripheral coverage provides MSCAN modules, SPI/SCI, PWM, an ADC, and the XGATE peripheral co-processor for real-time I/O handling. The S12X architecture layers a second peripheral co-processor (XGATE) alongside the main CPU, which lets the MCU service interrupt-heavy CAN, LIN, and display-refresh traffic without offloading the main thread. This dual-core-in-one-die model was NXP's signature differentiator versus simpler 16-bit competitors and remains attractive for cost-sensitive instrument-cluster designs that need TFT support without committing to a 32-bit ARM core. Typical applications include automotive instrument clusters with TFT displays, body control modules, HVAC human-machine interfaces, and industrial HMI panels that demand automotive-grade temperature and EMC behavior. Its automotive qualification also makes it suitable for motorcycle dashboards, agricultural equipment HMIs, and marine gauges. Compact design considerations include routing the wide LQFP-144 footprint on a 4-layer PCB and reserving an SPI/I2C bus for the TFT controller side-channel when an external larger TFT is cascaded. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and design engineers evaluate the S912XHZ256F1VAG for both new designs and field-replacement scenarios.

USD $13,98 Em estoque

S912XHZ512F1VAL

S912XHZ512F1VAL - 16-bit MCU, 512KB Flash, 80MHz S12X | NXP

The NXP Semiconductors S912XHZ512F1VAL is a 16-bit microcontroller from the S12X family, featuring an S12X CPU core with 512KB of on-chip Flash memory, operating at up to 80MHz, qualified for the -40°C to +105°C automotive temperature range and packaged in a 112-pin LQFP. The 'X' in S12X denotes the enhanced XGATE coprocessor and richer peripheral mix that distinguish this family from the original HCS12 core, making the device well-suited to instrument-cluster and human-machine interface (HMI) applications. NXP originally targeted this sub-family at low-end automotive dashboard markets with on-chip TFT display drivers. A microcontroller (MCU) is a single-chip processor that integrates a CPU, non-volatile program memory (typically Flash), working RAM, and a set of on-chip peripherals such as timers, ADC, communication controllers (CAN, LIN, SPI, SCI), and I/O. MCUs sit at the lowest tier of the embedded computing hierarchy - below microprocessors (MPUs) and application processors - and are used wherever deterministic real-time control is required. The S12X family specifically targets body electronics, instrument clusters, and gateway modules that demand CAN connectivity, robust PWM channels, and an extended temperature envelope. Key specifications for the S912XHZ512F1VAL include 512KB of program Flash, 32KB of SRAM (typical for this family, see _validation_note), a 50MHz or 80MHz bus clock option, 8 PWM channels, two 1Mbps CAN 2.0A/B modules, an on-chip TFT display driver, and a -40°C to +105°C automotive operating range. The 112-pin LQFP package exposes enough I/O to drive a small TFT panel directly while still leaving pins for switch-scanning and body-network communication. Architecturally, the S12X combines a 16-bit HCS12 CPU with an XGATE peripheral coprocessor that offloads interrupt-intensive tasks (CAN, SPI, PWM) and lets the main CPU focus on application logic. The result is higher effective throughput than a single-core HCS12 part at the same clock frequency. The integrated TFT controller reduces external display-driver ICs and the associated BOM. Typical applications include automotive instrument clusters, HVAC control panels, body-control modules, motorcycle or scooter dashboards, and industrial HMI panels with a CAN bus backbone. The combination of CAN, PWM, ADC, and on-chip display drive makes it a single-chip solution for many 2-wheel and 4-wheel dashboard designs. When designing with this MCU, ensure the JTAG/BDM debug header is brought out to a standardized 6-pin or 10-pin header for programming and calibration. Also confirm that the chosen TFT panel's timing parameters fall within the on-chip display-controller limits documented in the device reference manual before committing to the PCB layout. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design considerations not found in the manufacturer datasheet. Data was cross-referenced across NXP's official product page, Octopart, DigiKey, Mouser, Heisener, Jotrin, and FindIC as of 2026-10-19.

USD $16,40 Em estoque

S912ZVC12F0MLF

S912ZVC12F0MLF - 16-bit S12Z MagniV MCU 128KB Flash | NXP

The NXP Semiconductors S912ZVC12F0MLF is a MagniV 16-bit microcontroller built on the S12Z core, delivering 32 MHz CPU performance with 128 KB of on-chip Flash memory in a 48-pin LQFP (7x7 mm) package. It is part of NXP's automotive-qualified S12 MagniV family and operates across an extended -40C to +125C temperature range, targeting body, chassis, and motor-control automotive ECUs. The MagniV family integrates a high-voltage analog front-end together with a microcontroller die, reducing board area and BOM count in 12 V automotive applications. A 16-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, memory, peripherals, and analog/digital interfaces. The S12Z architecture is a 16-bit enhanced successor to the classic HCS12 family, with an improved instruction set, better code density, and a richer set of on-chip peripherals including CAN, LIN, SCI/SPI, PWM timers, and 12-bit ADC channels. The 'MagniV' designation means the die is paired with high-voltage analog circuitry capable of directly interfacing 12 V automotive buses and sensor signals without external level shifters. Key features of the S912ZVC12F0MLF include 128 KB (128K x 8) Flash, 4 KB to 8 KB of RAM (depending on peripheral allocation), a 32 MHz bus/core clock, on-chip CAN and LIN/SCI/SPI interfaces, multi-channel PWM suitable for motor control, and a 12-bit successive-approximation ADC. The device is qualified to NXP's automotive-grade standards, supporting PPAP and AEC-Q100 expectations for body and chassis ECUs. Architecturally, the S12Z core uses a pipelined 16-bit CPU with hardware multiply/divide, BDM (Background Debug Mode) for in-circuit debug, and a memory protection unit. The integrated voltage regulator and LIN/CAN physical layers allow direct connection to 12 V vehicle buses, simplifying PCB layout and reducing the need for external transceivers in some configurations. Typical applications include automotive body control modules, HVAC blowers and actuators, lighting controllers, smart junction boxes, and small motor-control ECUs such as seat or mirror adjusters. The combination of automotive qualification, integrated analog, and 32 MHz CPU performance makes this part a drop-in fit for cost-sensitive 12 V automotive nodes. When designing, verify that the 48-pin LQFP footprint and pinout match your PCB land pattern and that the package's thermal pad (if present) is soldered for heat dissipation.

USD $7,40 Em estoque

S912ZVC12F0VLF

S912ZVC12F0VLF - S12Z MagniV 128KB Flash 32MHz MCU | NXP

The NXP S912ZVC12F0VLF is an automotive-qualified 16-bit microcontroller from the S12 MagniV family, built around the S12Z core and integrating 128KB of embedded Flash plus an analog-friendly high-voltage subsystem on a single die. It delivers 128KB (128K x 8) of program Flash and operates at up to 32MHz internal bus speed, packaged in a 48-pin LQFP (7x7 mm). The VLF suffix identifies the standard production LQFP-48 variant specified for -40C to +105C automotive environments. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM/EEPROM), and a set of on-chip peripherals. In the broader taxonomy this part is an automotive-grade 16-bit MCU -> CISC MCU -> embedded controller -> semiconductor IC. The S12Z core is the latest evolution of NXP's HCS12 family, offering enhanced instruction set and C-friendly architecture while retaining the deterministic interrupt behavior that made the S12 family popular in body and chassis electronics. Key features of the S912ZVC12F0VLF include 128KB Flash, 8KB RAM, 2KB EEPROM, 28 user I/O lines, and a peripheral portfolio covering CANbus, I2C, SCI, and SPI connectivity. On-chip analog includes an integrated voltage regulator and high-voltage I/O capable of direct 5V or 12V automotive bus interfacing - this is the defining feature of the MagniV line: the analog front end, supply regulation, and LIN/CAN PHY are integrated so the device can be powered directly from the 12V automotive battery. The S12Z core executes most instructions in a single bus cycle at 32MHz, giving roughly 32 MIPS of deterministic throughput. The integrated high-voltage input pins tolerate 40V load-dump transients, while the on-chip 5V regulator produces the internal logic supply. Built-in peripherals such as PWM channels, DMA, a watchdog timer, and POR reduce external component count for motor control and sensor interface designs. Typical applications include 12V automotive body control modules, HVAC blowers and fans, door/window lift modules, LIN/CAN sensor nodes, and small BLDC motor controllers. The integrated HV capability removes the need for external CAN transceivers on LIN slaves and allows direct connection to switches on the wiring harness. Designers should evaluate I/O count (28 pins available after HV/analog allocation), memory headroom for application code, and the LQFP-48 thermal envelope when selecting this part versus other S12 MagniV derivatives. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in S12Z family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,05 Em estoque

S912ZVC96F0MLF

S912ZVC96F0MLF - 96KB Flash S12Z MagniV 16-bit MCU | NXP

The NXP S912ZVC96F0MLF is an integrated single-package automotive-qualified 16-bit microcontroller from the MagniV family, combining an S12Z CPU core running up to 32 MHz with a 5V-regulator/LIN physical layer, 96 KB of on-chip Flash, 8 KB RAM, and 10-bit ADC, all housed in a 48-pin LQFP (7x7 mm) package. It targets cost-optimized automotive body, HVAC, and LIN-slave node applications. An S12Z microcontroller is a 16-bit member of the NXP HC12/S12 architecture family, often classed within the broader automotive microcontroller and embedded MCU taxonomies (low-end automotive MCU -> body-domain ECU MCU -> S12 MagniV family). The MagniV line specifically integrates the voltage regulator and physical-layer LIN transceiver on-chip, eliminating external LIN transceivers and external supply regulators to reduce the BOM and shrink PCB area for body-electronics modules. Key headline features include 96 KB (96K x 8) program Flash, 8 KB SRAM, a 32 MHz maximum CPU frequency with a 32 MHz bus clock, a 10-channel 10-bit SAR ADC, an integrated 5V linear regulator, a LIN 2.x/SCI physical layer, multiple timers (TIM, RTI, PIT), PWM channels, and a peripheral set covering GPIO, SPI, and SCI for in-vehicle networking. The RWW (Read-While-Write) Flash allows EEPROM emulation without an external serial EEPROM. Architecture is built around the 16-bit S12Z enhanced CPU with extended address space, hardware stack pointer handling, and BGND debug; the device integrates high-voltage analog inputs (5V/12V-tolerant), EEPROM at 2 KB, and a -40 to +125C AEC-Q100 grade-1 qualified operating range. The 48-LQFP footprint is shared across the ZV/ZC MagniV family variants, allowing pin-compatible upgrades across memory sizes. Typical applications include automotive HVAC door modules, seat controllers, window lift and door mirror modules, body-control slaves (LIN nodes), instrument cluster auxiliary circuits, and other body-domain ECUs. The integrated LIN and 5V regulator simplify LIN slave design versus discrete LIN MCU + external transceiver solutions. When designing with this device, ensure adequate decoupling (>=100 nF plus >=4.7 uF bulk) near the integrated regulator output, dedicate a star-ground connection between ADC analog ground and digital ground, and respect LIN bus load impedance requirements per the LIN 2.x specification. AEC-Q100 grade-1 qualification at -40 to +125C makes the part directly suitable for under-hood and door-module placements.

USD $7,50 Em estoque

S912ZVFP64F1VLL

S912ZVFP64F1VLL - 16-bit S12Z MagniV MCU 64KB Flash | NXP

The NXP Semiconductors S912ZVFP64F1VLL is a 16-bit S12Z MagniV mixed-signal microcontroller featuring 64KB Flash, 32MHz core clock, AEC-Q100 qualification, and a 100-pin LQFP package (14x14 mm). It integrates an S12Z CPU core with on-chip voltage regulator, CAN and LIN physical layer, display controller, and instrument gauge drivers targeting entry-level automotive and industrial instrument cluster applications. An S12Z MagniV MCU is a mixed-signal automotive microcontroller that combines a 16-bit S12Z processing core with high-voltage analog peripherals on a single die. It belongs to the broader MagniV family (mixed-signal MCU > automotive MCU > 16-bit MCU > microcontroller) and reduces system bill-of-materials by integrating the voltage regulator, physical-layer transceivers, and LCD/LED drivers that an instrument cluster normally requires as external components. This system-in-package integration is the key architectural advantage of the MagniV approach versus conventional automotive MCUs that need separate LIN/CAN transceivers and supply regulators. Key features of the S912ZVFP64F1VLL include 64KB (64K x 8) of embedded Flash, 32MHz maximum CPU clock frequency, automotive-grade temperature range of -40C to +105C, AEC-Q100 qualification, and 100 LQFP gull-wing leads. The S12Z core uses an enhanced instruction set with more linear addressing versus legacy HC12/HCS12 cores, allowing C-efficient code generation. On-chip RAM is 4KB and EEPROM is not specified in the available data. The device's mixed-signal architecture pairs the CPU with a built-in voltage regulator capable of direct 12V battery supply, plus CAN and LIN physical layers that meet automotive bus standards. Integrated display and gauge-driver peripherals support stepper-motor-based instrument pointers and segment LCDs without external driver ICs. The 100-pin LQFP exposes the full peripheral mix for cluster designs. Typical applications include automotive instrument clusters (speedometer, tachometer, fuel/temperature gauges), two-wheeler and entry-level automotive dashboards, industrial HMI panels, and body-domain controllers requiring CAN/LIN connectivity. The integrated LIN PHY particularly fits low-speed body and cluster networks. Design consideration: the on-chip voltage regulator and high-voltage analog inputs require careful PCB layout to isolate digital switching noise from sensitive analog sections. Decoupling capacitors specified in the manufacturer datasheet must be placed adjacent to the supply pins to meet EMC/ESD automotive requirements. This page synthesizes distributor pricing across 5+ sources, drop-in same-package alternatives from the S12Z MagniV family, and practical design notes not aggregated on the manufacturer product page alone.

USD $7,95 Em estoque

S912ZVFP64F1VLQ

S912ZVFP64F1VLQ - 16-bit S12Z MagniV MCU, 64KB Flash, LQFP-144 | NXP

The NXP S912ZVFP64F1VLQ is a 16-bit S12Z core MagniV mixed-signal microcontroller running at 32 MHz with 64 KB of on-chip Flash, housed in a 144-pin LQFP (20x20 mm) package. It is qualified to -40 °C to +105 °C and AEC-Q100 automotive grade, integrating a sophisticated MCU core with a voltage regulator, CAN and LIN physical layers, a display controller, and instrument gauge drivers. What is an automotive MCU? An automotive microcontroller (MCU) is a single-chip computer designed for the harsh electrical and thermal environment of vehicles, integrating CPU, memory, peripherals, and mixed-signal interfaces on one die. Within the broader semiconductor hierarchy, automotive MCUs belong to embedded microcontrollers, which themselves fall under microcontrollers (MCUs), then integrated circuits (ICs), then semiconductors. The S12 MagniV family from NXP is a mixed-signal MCU family targeting entry-level automotive instrument clusters and industrial HMI. Key features include 64 KB (64K x 8) of embedded Flash, 32 MHz S12Z CPU core, on-chip voltage regulator, integrated CAN and LIN physical layers (PHY), a display controller for instrument clusters, dedicated instrument gauge drivers (stepper/LED), and AEC-Q100 qualification for automotive use. The integration of analog PHY and gauge drivers alongside the CPU dramatically reduces external component count in cluster designs. Architecturally, the S12ZVH combines the S12Z 16-bit CPU with high-voltage analog macros including LIN/CAN transceivers and gauge driver outputs, all manufactured on NXP's automotive-qualified mixed-signal process. This single-chip integration eliminates the discrete CAN/LIN transceiver ICs and external regulators that traditional cluster designs require. Typical applications include entry-level automotive instrument clusters, two-wheeler / motorcycle dashboards, industrial HMI panels, CAN/LIN node controllers, and body electronics modules requiring analog gauge outputs. The wide -40 to +105 °C operating range also supports under-hood and industrial environments. When designing with this MCU, follow NXP's recommended decoupling scheme (typically 100 nF plus bulk capacitance near each supply pin) and consult the S12ZVH reference manual for the gauge-driver PCB layout, which is sensitive to ground bounce. This page synthesizes distributor pricing, drop-in S12 MagniV alternatives, and practical design notes not aggregated in any single manufacturer datasheet.

USD $7,69 Em estoque

S912ZVH128F2CLL

S912ZVH128F2CLL - 32MHz 128KB Automotive MCU | NXP

NXP S912ZVH128F2CLL is a MagniV 16-bit automotive mixed-signal microcontroller with an S12Z core, 128KB of flash memory, a 32 MHz operating frequency, and a 100-LQFP package. Rated for -40°C to +85°C, it combines an integrated voltage regulator, CAN and LIN physical layers, a display controller, and instrument-gauge drivers. These features support entry-level automotive and industrial instrument-cluster designs. A microcontroller is a programmable system-on-chip that executes embedded control logic, manages digital interfaces, and coordinates sensors, communications, displays, and actuators. In the automotive hierarchy, this S12Z device belongs to the S12 MagniV family of mixed-signal MCUs, combining a general-purpose CPU with analog and communication peripherals. Its automotive qualification and mixed-signal integration reduce the number of external discrete functions needed in instrument-cluster systems. The key verified features are a 16-bit S12Z core, 128KB flash organized as 128K x 8, a maximum stated frequency of 32 MHz, and a 100-LQFP 14 x 14 mm package. The integrated voltage regulator supports power-management functions, while CAN and LIN physical layers address vehicle-network connectivity. The display controller and instrument-gauge drivers are especially relevant to dashboard and cluster designs where display timing, gauge indication, and diagnostic communications must coexist. Architecturally, the part is designed around the 16-bit S12Z core rather than a general-purpose high-core-count processor. This makes it suitable for deterministic embedded control, gauge processing, vehicle-network communication, and display support. Its 128KB flash capacity provides dedicated program storage, while the integrated analog and communication blocks reduce board-level component count. The exact RAM size, ADC specifications, timer details, and electrical limits are not provided in the verified data and must be confirmed from the manufacturer documentation before design release. Typical applications include entry-level automotive instrument clusters, industrial instrument panels, CAN-connected gauge systems, LIN subnetwork controllers, and display-based control panels. The 32 MHz S12Z core provides the processing foundation for coordinating cluster graphics, gauge updates, button or rotary inputs, and vehicle-network messages. The integrated LIN physical layer is useful for local peripheral connectivity, while CAN supports higher-level vehicle-network communication. Designers should confirm the complete pinout, alternate-function multiplexing, external component requirements, reset behavior, clocking, and power-supply limits against the manufacturer documentation before layout. A 100-LQFP package has exposed leads on all four sides, so trace escape, thermal management, and signal-integrity planning remain important. The automotive qualification does not remove the need to validate transient immunity, EMC performance, temperature behavior, and production-test requirements for the finished vehicle or industrial system. This page consolidates the verified manufacturer and distributor product information with application guidance, sourcing context, and design cautions. It distinguishes documented facts from missing technical parameters and avoids treating generic cross-reference results as proof of pin compatibility.

USD $8,94 Em estoque

S912ZVH64F2CLQ

S912ZVH64F2CLQ - MagniV 16-bit MCU 64KB Flash 32MHz | NXP

The NXP Semiconductors S912ZVH64F2CLQ is a MagniV 16-bit automotive microcontroller with an S12Z CISC core running at 32MHz, 64KB of Flash memory, an operating temperature range of -40C to +85C, and a 144-pin LQFP (20x20 mm) surface-mount package. A MagniV MCU is a mixed-signal microcontroller that integrates power management, communication physical layers, and driver circuitry on the same die as the CPU. In the broader hierarchy, the S912ZVH64F2CLQ sits within the S12 MagniV family of 16-bit microcontrollers, which belong to the class of automotive embedded processors used in body electronics and instrumentation systems. Key features include a 32MHz HCS12Z CPU core, 64KB (64K x 8) of Flash program memory, an integrated voltage regulator, CAN and LIN physical layers, a display controller, and instrument gauge drivers for stepper motor gauges and segment LCD displays. The integration of the physical layer transceivers removes external CAN/LIN transceiver ICs from the bill of materials and reduces PCB area in cluster electronics. The S12ZVH series is specifically designed for controlling automotive and industrial instrument clusters. The on-chip display controller drives segment LCDs, while dedicated gauge drivers directly control stepper-motor pointers for speedometers, tachometers, and fuel gauges. The automotive qualification and -40C to +85C temperature grade support entry-level vehicle programs and harsh industrial environments. Typical applications include entry-level automotive instrument clusters, motorcycle and off-road vehicle gauge systems, and industrial panel instrumentation requiring CAN connectivity and mixed LCD/stepper display driving. A key design consideration: the device is supplied in Tray packaging, and the 144-LQFP (20x20) footprint requires careful decoupling of the integrated regulator and attention to the datasheet layout guidelines for the mixed-signal physical layers. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet, giving engineers a single citable reference for selection and sourcing decisions.

USD $5,95 Em estoque

S912ZVHL32F1VLL

S912ZVHL32F1VLL - S12Z MagniV 16-bit MCU 32KB Flash | NXP

The NXP Semiconductors S912ZVHL32F1VLL is a MagniV 16-bit microcontroller with an S12Z core running at 32 MHz, integrating 32 KB of Flash program memory, 2 KB of RAM, and 2 KB of EEPROM, housed in a 100-pin LQFP (14x14 mm) package. It is rated for automotive qualification and operates from -40 °C to +105 °C, targeting instrument-cluster and body-electronics applications. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, working RAM, and on-chip peripherals. The 16-bit class sits between 8-bit legacy MCUs and 32-bit Cortex-M devices, offering a balance of deterministic interrupt response, code density, and peripheral integration. MagniV parts further shrink the system bill of materials by co-integrating the voltage regulator, LIN/CAN physical layer, LCD driver, and gauge drivers inside one package. The S912ZVHL32F1VLL features 73 user I/O lines, communication interfaces (CAN, LIN, SCI, SPI, I²C), and on-chip peripherals including DMA, LCD controller, PWM, watchdog timer, and power-on reset. The S12Z core delivers up to 32 MHz performance with enhanced interrupt handling and a richer instruction set than older S12X derivatives. The integrated LCD controller and stepper-motor gauge drivers make the part specifically suited to automotive dashboard and motorcycle/mid-tier instrument clusters. Typical applications include two- and four-wheel automotive instrument clusters, body controllers with LIN/CAN connectivity, HVAC control heads, motorcycle dashboards, and industrial HMI panels with LCD readout. Its 100-LQFP footprint and -40 °C to +105 °C grade cover mainstream under-hood and cabin-zone environments. When designing with this MCU, ensure the integrated regulator's input bulk capacitance follows the NXP reference design and the LIN/CAN bus pins are protected per IEC 61000-4-2 ESD guidelines. The 100-LQFP allows rework-friendly hand soldering and standard 0.5 mm-pitch PCB layout for low-volume production. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated on the NXP product page or third-party distributor listings.

USD $5,32 Em estoque

S912ZVHL64F1VLL

S912ZVHL64F1VLL - 64KB Flash S12Z MagniV MCU 32MHz | NXP

The NXP S912ZVHL64F1VLL is a 16-bit S12Z MagniV mixed-signal microcontroller delivering 32MHz CPU speed with 64KB (64Kx8) on-chip Flash program memory in a 100-pin LQFP (14x14mm) surface-mount package. It integrates an S12Z core with 73 user I/O lines, 32MHz bus clock, 4KB EEPROM data storage, 4KB SRAM, and a rich set of analog/digital peripherals designed for entry-level automotive and industrial instrument-cluster applications. A MagniV mixed-signal MCU is a single-chip microcontroller that combines the CPU core, voltage regulator, and physical-layer communication transceivers (CAN, LIN, SCI, SPI, I2C) in one mixed-signal die, reducing bill-of-materials count and PCB area in body-electronics and instrument-cluster designs. The S12ZVH family specifically targets automotive gauge and display subsystems where it pairs the CPU with display-driver and stepper-motor-driver peripherals for direct connection to instrument cluster needles and segment LCDs. Key features include an integrated voltage regulator (VREG), an LCD driver, stepper-motor gauge drivers for analog needle actuation, an MS-CAN module for in-vehicle networking, and LIN physical layer compliance. The 73 GPIO lines support direct segment-LCD multiplexing and the automotive AEC-Q100 qualification with the -40C to +105C operating range allows operation under hood-side cluster thermal stress. Hardware security, cyclic redundancy check, and watchdog timer improve functional-safety compliance. The S12ZVH architecture builds on Freescale/NXP's S12 legacy with an enhanced instruction set, larger linear address space, and improved C-compiler support. The 100-LQFP package provides ample I/O for instrument cluster pinouts while remaining within a moderate 14x14mm footprint suitable for double-sided PCB assembly. The on-chip voltage regulator can derive the internal 1.8V logic supply directly from a 5V automotive battery rail. Typical applications include automotive instrument clusters (speedometer/tachometer/fuel/temperature gauges with segment LCD), two-wheeler and small-EV dashboards, HVAC control panels, body controllers with LIN sub-nodes, and industrial HMI panels. The integrated stepper-motor drivers make it the natural fit for stepper-needle clusters without requiring external driver ICs. When designing with the S912ZVHL64F1VLL, ensure PCB layout keeps the on-chip regulator decoupling caps within 3mm of the VREG pins, and use the BDLC (Byte Data Link Controller) or MS-CAN module per NXP's reference application notes for OEM-network compliance. For LCD bias generation, follow the datasheet's recommended charge-pump and resistor-ladder network to minimize ghost-segment artifacts.

USD $4,07 Em estoque

S912ZVHY32F1CLL

S912ZVHY32F1CLL - 32MHz 32KB Flash MCU | NXP | Automotive

The NXP Semiconductors S912ZVHY32F1CLL is an automotive-qualified 16-bit S12Z MagniV mixed-signal microcontroller operating at 32 MHz, with 32 KB of flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It includes 73 I/O pins and integrates communication and display-oriented peripherals for instrument-cluster designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, communication controllers, timers, and input/output functions on one integrated circuit. The S12Z belongs to the MagniV mixed-signal MCU family, combining digital control with analog and communication capabilities. Its system position is MCU -> embedded controller -> mixed-signal processing -> automotive electronics. Verified features include a 16-bit S12Z core, 32 KB flash organized as 32K x 8, 32 MHz operation, CAN, LIN, I2C, SCI, and SPI connectivity, plus DMA, LCD, power-on reset, PWM, and watchdog-timer peripherals. The integrated voltage regulator, display controller, CAN and LIN physical layers, and instrument-gauge drivers reduce the external circuitry needed for entry-level automotive and industrial instrument clusters. The S912ZVHY32F1CLL supports a 4.5 V to 5.5 V supply range and 73 digital I/O functions. Its -40°C to +85°C temperature range and automotive-qualified status make it suitable for temperature-variable vehicle environments. Because it is a mixed-signal MCU rather than a power semiconductor, no safe-operating-area curve applies. Typical uses include automotive instrument clusters, gauge-control boards, CAN or LIN network nodes, display controllers, body-control modules, and industrial panel interfaces. Engineers should use the complete NXP documentation set to confirm startup, pin multiplexing, memory maps, clocking, and peripheral electrical limits before releasing production hardware. The most important layout consideration is decoupling of the 5 V supply and routing of CAN, LIN, display, and instrument-gauge signals. This page consolidates verified distributor availability, manufacturer positioning, and practical selection guidance, while marking unverified technical details rather than estimating them.

USD $1,81 Em estoque

S912ZVHY32F1CLQ

S912ZVHY32F1CLQ - 16-Bit 32MHz Automotive MCU | NXP

The NXP Semiconductors S912ZVHY32F1CLQ is an automotive-qualified 16-bit MagniV microcontroller with an S12Z core, 32 KB Flash, 32 MHz operation, and a 144-pin QFP package. Designed for entry-level automotive and industrial instrument-cluster systems, the device combines an integrated voltage regulator, CAN and LIN physical layers, a display controller, and instrument-gauge drivers. A microcontroller is a programmable semiconductor system that executes firmware, reads inputs, controls outputs, and coordinates embedded-system functions. The S12Z belongs to the S12 MagniV mixed-signal MCU family, placing a 16-bit core and automotive communications peripherals within the broader microcontroller and embedded-control hierarchy. This combination makes it suitable for dashboard and cluster platforms rather than general-purpose host processing. The verified product data identifies 32 KB of Flash, a 32 MHz maximum clock, a -40°C to +85°C temperature range, automotive qualification, and a 144-pin QFP package. The integrated CAN and LIN physical layers support vehicle-network connectivity, while the display controller and instrument-gauge drivers reduce the external circuitry needed for cluster applications. The integrated voltage regulator supports power-supply implementation within the MCU platform. The S12Z core provides a 16-bit processing architecture optimized for embedded control and automotive instrumentation workloads. Its mixed-signal feature set places communication, display, regulation, and gauge-driver functions in one device. Compared with a discrete cluster controller, this integration can reduce board-level component count and simplify firmware integration, although final performance and timing must be evaluated against the complete hardware and software requirements. Typical applications include entry-level automotive instrument clusters, industrial instrument panels, gauge systems, CAN-connected vehicle nodes, LIN-connected body and dashboard modules, and display-control platforms. The 144-pin package exposes the device's expanded mixed-signal and connectivity resources but requires careful PCB layout and adequate clearance around the fine-pitch leads. Designers should verify the exact pinout, electrical limits, clocking requirements, external-component recommendations, memory map, and automotive qualification details in the NXP product documentation before layout release. The verified web results identify automotive qualification and temperature grade, but they do not provide the complete electrical timing, memory-map, transceiver-detail, or package-pin data needed to replace them with assumptions. This page consolidates verified distributor and manufacturer information for the S912ZVHY32F1CLQ and adds application, sourcing, and design context. It is intended as an engineering product reference; unresolved technical parameters remain explicitly marked where the supplied source data is incomplete.

USD $1,59 Em estoque

S912ZVHY32F1VLL557

S912ZVHY32F1VLL557 - 32MHz S12Z MagniV 32KB Flash MCU | NXP

The NXP S912ZVHY32F1VLL557 is a 16-bit S12Z core MagniV microcontroller with 32KB Flash memory and 32MHz CPU clock in a 100-pin LQFP package (14x14mm). It belongs to the S12ZVM family of automotive-qualified microcontrollers designed for integrated power-conversion and motor-control applications, combining an S12Z CPU with a high-voltage analog front-end on a single die. The device operates from -40C to +105C and is AEC-Q100 qualified for automotive environments. An S12Z MagniV microcontroller is a 16-bit automotive MCU that integrates the S12Z CPU with a high-voltage analog front-end including a LIN/CAN physical layer, gate drivers, and voltage regulators. The MagniV family sits in the broader NXP 16-bit automotive MCU hierarchy: S12Z -> S12 MagniV -> HCS12 -> 16-bit automotive MCU portfolio, and is specifically designed to reduce system cost and PCB area in body electronics, HVAC blowers, and DC motor controllers. Key differentiating features of the S912ZVHY32F1VLL include automotive qualification (AEC-Q100 Grade 2 / -40C to +105C), 32KB embedded Flash with 1KB EEPROM emulation, 2KB RAM, and integrated LIN/CAN PHY. The 100-LQFP package provides ample GPIO and analog channels for sensor interfacing and motor-drive feedback. The device includes an enhanced capture timer (ECT), 10-bit ADC, and PWM channels suitable for brushless DC and stepper motor control. The S12Z core executes the S12 instruction set with hardware multiply/divide and extended addressing, delivering 32MHz CPU performance in C-friendly code. The integrated GDU (Gate Driver Unit) and VSUP regulator allow direct connection to 12V automotive battery rails, eliminating external interface components. This system-in-package approach targets BLDC and PMSM motor control with minimal external BOM. Typical applications include HVAC blower motor control, electric water/oil pumps, transmission solenoids, body electronic modules, and 12V brushless fans. The integrated 12V-to-5V regulator and LIN PHY particularly suit LIN-driven smart actuator nodes in modern vehicle electrical architectures. When designing with this part, ensure that the 12V supply decoupling meets NXP reference design guidelines. The S12Z CPU uses a slightly different instruction encoding than older HC12 devices, so legacy S12 assembly code may require recompilation. Read back debug should use the Background Debug Module (BDM) rather than in-circuit emulation. This page synthesizes distributor availability, NXP family drop-in alternatives, and design considerations not found in the standard product brief.

USD $5,45 Em estoque

S912ZVHY64F1CLL

S912ZVHY64F1CLL - 16-bit S12Z MCU 64KB Flash 100-LQFP | NXP

The NXP S912ZVHY64F1CLL is a 16-bit S12Z MagniV mixed-signal microcontroller featuring 64KB of Flash program memory, 32MHz CPU clock, 4KB RAM, and a high level of analog and communications integration for entry-level automotive and industrial instrument clusters. Housed in a 100-pin LQFP (14x14 mm) package with 4.5V to 5.5V single-supply operation, the device targets body and chassis electronics as well as two-wheeler and small-engine dashboards. A microcontroller (MCU) is a single-chip computer integrating a CPU core, program and data memory, and a rich set of peripherals. The S12Z family belongs to NXP's 16-bit S12 MagniV mixed-signal MCU line, which sits under the broader automotive microcontroller taxonomy: MCU -> 16-bit MCU -> S12 MagniV mixed-signal MCU -> instrument-cluster-grade automotive MCU. MagniV parts are distinguished by their high level of integration including on-chip voltage regulator, LIN/CAN physical layer, and display/gauge drivers that are normally external in discrete designs. Key features include an on-chip S12Z CPU core with up to 32MHz core clock, 64KB (64K x 8) embedded Flash with security, 4KB SRAM, an integrated voltage regulator for single-supply 5V operation, and built-in physical-layer modules for CAN and LIN. Display, gauge, and instrument-cluster functions are served by an integrated LCD controller and stepper-motor / gauge drivers, reducing external component count. The 100-LQFP (14x14) package provides a large pin budget for analog, motor-driver, and display-interface channels while remaining manageable on a 4-layer PCB. Internally, the S12Z core uses an enhanced 16-bit instruction set aimed at deterministic interrupt response and code-density improvements over the legacy S12X, while remaining source-compatible for migration. The part is qualified to industrial temperature grade (-40 to +85 degC) and is AEC-Q100 compliant for automotive in-cabin electronics. The integrated analog front end and physical-layer IP eliminate the external PHY IC and most discrete drivers normally required for entry-level cluster designs. Typical applications include entry-level automotive instrument clusters (speedometer, fuel, temperature, gear indicator), two-wheeler and small-engine dashboards, simple HVAC control panels, body controllers with LIN sub-nets, and industrial panel meters. The combination of integrated gauge drivers and a single 5V rail makes it well suited to cost-sensitive 12V automotive systems. When designing with this MCU, allocate the four stepper-motor gauge channels and verify their current limits against the chosen motor; the S12ZVH pins are 5V-tolerant only. Place the bulk decoupling capacitor close to the integrated regulator supply pin. For multi-node LIN/CAN networks, ensure the master node uses the same family so the physical layer slope parameters match. This page synthesizes distributor pricing, real drop-in alternatives, automotive-grade siblings, and practical design notes that go beyond the data sheet quick-reference block.

USD $7,05 Em estoque

S912ZVL64F0MLCR

S912ZVL64F0MLCR - 16-Bit S12Z MCU 64KB Flash 32MHz LQFP-32 | NXP

The NXP Semiconductors S912ZVL64F0MLCR is a 16-bit microcontroller from the S12 MagniV family built around the S12Z CPU core, delivering 32 MHz performance with 64 KB of on-chip Flash and an integrated -V (voltage regulator) subsystem. It is housed in a 32-pin LQFP package (7 mm × 7 mm × 1.4 mm, 0.8 mm pitch) and targets automotive body and chassis applications where a single 5V/12V supply directly powers logic and actuator drivers. A microcontroller (MCU) is an integrated processor with CPU, memory, and peripherals on a single die, used for embedded control. The S12Z CPU is an enhanced 16-bit core within NXP's HCS12/S12X lineage, sitting in the broader automotive microcontroller hierarchy: S12 family → 16-bit MCU → automotive MCU → embedded processor. MagniV devices specifically integrate a high-voltage analog front-end so the chip can be powered directly from a 12V automotive battery without an external regulator, simplifying board design. The S912ZVL64F0MLCR provides 64 KB (64K × 8) Flash with 4 KB RAM, an integrated S12Z core running at 32 MHz, plus MSCAN (CAN), SCI, SPI, IIC, and PWM/timer peripherals typical of the S12 MagniV family. Wide supply tolerance supports 5.5 V to 18 V battery-transient operation. Built-in EEPROM emulation, a 16-bit timer, and 10-bit ADC blocks target motor-control and LED-driver ECUs. The 32-LQFP footprint and trace-compatible pinout make it a drop-in option within the S912ZV family (e.g., S912ZVML12F3WKH, S912ZVC12F0MLF, S912ZVL12F0MLC variants). Architecturally, the S12Z core adds a multi-stage pipeline, indexed addressing improvements, and a co-processor interface while keeping the HCS12 instruction set for toolchain compatibility. Background debug mode (BDM), on-chip voltage regulator, and low-power stop/PSAVE modes are integrated. The device supports -40 °C to +125 °C ambient operation with automotive EMC compliance, making it well suited to under-hood and chassis-mounted ECUs. Typical applications include automotive body controllers (BCM) and lighting modules, HVAC flap/door actuators, seat/window control boards, motorcycle and small-EV ECU motor drivers, and industrial CAN-connected sensor nodes. The integrated 5V/12V analog front-end also suits solar/battery-backed instrumentation. When designing with this MCU, verify the high-voltage analog routing guidance in NXP application notes AN4724 and ensure the LQFP-32 thermal pad (if present on the specific die step) is soldered for adequate heat spreading. A 100 nF decoupling capacitor must be placed within 5 mm of VDDX/VSSX pins per S12 MagniV hardware guidelines.

USD $7,01 Em estoque

S912ZVL64F0MLF

S912ZVL64F0MLF - S12Z MagniV 64KB Flash 32MHz Auto MCU | NXP

The NXP Semiconductors S912ZVL64F0MLF is an automotive-qualified 16-bit microcontroller based on the S12Z CPU core, delivering 64KB of on-chip Flash, 32 MHz CPU clock, and integrated analog peripherals in a 48-pin LQFP (7x7 mm) package with -40C to +125C operating range. The MagniV family combines the S12Z core with a high-voltage analog front end and LIN/CAN connectivity, targeting body and chassis applications where reducing PCB area and BOM count is critical. The part operates from a 3.3 V or 5 V supply and is qualified to automotive standards, allowing direct deployment under the hood, in DC motor control, or in sensor interface modules. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripheral interfaces, and analog/digital I/O. The S12Z belongs to the 16-bit CISC family originally derived from the Freescale HC12/S12 architecture, modernized to deliver higher code density, faster context switching, and improved peripheral integration. Within the broader semiconductor taxonomy, the S12Z MCU sits inside the automotive-qualified microcontroller segment, between the 8-bit S08 family (lower cost) and the 32-bit Kinetis/S32K families (higher performance). The MagniV line further embeds high-voltage analog blocks, enabling direct connection to 12 V automotive buses without external drivers. Key features of the S912ZVL64F0MLF include 64KB Flash, 4KB RAM, an integrated 12-bit ADC, PWM channels, timers, GPIO, SCI/SPI/IIC communication peripherals, and a CAN 2.0 module. The 48-LQFP package exposes ample I/O while fitting compact body-electronics PCBs. The wide -40C to +125C automotive temperature grade makes the device suitable for under-hood and chassis environments that experience large thermal swings. Internal voltage regulation and an on-chip debug (BDM) interface simplify in-circuit programming and field firmware updates. Typical applications include automotive body control modules, HVAC blower controls, window lift and door modules, lighting controllers, dashboard clusters, and small sensor nodes that require CAN or LIN connectivity. The integrated analog front end is particularly useful for brush-DC motor control, solenoid drive, and switch-contact debouncing, replacing discrete driver ICs. Designers should evaluate the analog channel count and high-voltage tolerance relative to system needs. The 48-LQFP footprint, automotive qualification, and balanced peripheral set make S912ZVL64F0MLF a strong fit when BOM consolidation outweighs the need for 32-bit performance. This page consolidates distributor pricing, drop-in same-family alternatives, and practical design notes for engineers evaluating the S912ZVL64F0MLF for automotive body electronics.

USD $5,45 Em estoque

S912ZVL64F0VLC

S912ZVL64F0VLC - 64KB Flash S12Z MagniV MCU | NXP | Automotive

The NXP S912ZVL64F0VLC is a 16-bit S12Z MagniV mixed-signal microcontroller built on a 0.18 µm automotive-qualified process, integrating 64KB of Flash, 1KB of EEPROM, 4KB of SRAM, and an analog front end in a 32-pin LQFP package measuring 7 mm x 7 mm with 0.8 mm pitch. It runs at up to 32 MHz, supports 3.3 V and 5 V supply rails across an extended automotive voltage range up to 18 V, and is qualified to AEC-Q100 Grade 1 (-40 °C to +125 °C) for body and chassis ECUs. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, non-volatile program memory, working RAM, and a configurable set of analog and digital peripherals. The S12Z family is NXP's 16-bit CISC architecture, derived from the long-lived HC12/S12X lineage, paired here with NXP's MagniV single-chip integration concept in which a high-voltage analog front end and a microcontroller die share one package. The 'V' family segment targets 12 V automotive body and chassis applications where the MCU can directly sense and drive 12 V loads and survive load-dump transients up to 18 V. Key features include an integrated 12 V analog front end (LIN, GPIOs with high-V tolerance, a 12-bit ADC and timers), a BDM (background debug mode) interface for non-intrusive programming, an on-chip voltage regulator, and built-in safety support such as a window watchdog and a power-on reset. The device targets LIN-slave body controllers and mechatronic sub-modules where board area is at a premium and external high-side drivers and regulators are undesirable. The S12Z core is a pipelined 16-bit CISC engine whose instruction set is forward-compatible with legacy HC12/S12 code, and the part uses a uniform 64 KByte Flash array with ECC, plus EEPROM for small parameter storage. Peripherals are arranged through NXP's standard S12Z Global Express Map and can be relocated, which simplifies software partitioning across multiple addresses. Typical applications include automotive body controllers (BCM, door modules, mirror control), HVAC actuators and small motor drivers, and HVAC/lighting switch interfaces. Choose this part when you need a 32 MHz 16-bit core with 64 KB Flash at 32-LQFP and AEC-Q100 Grade 1 qualification, with the analog front end capable of handling 12 V directly. When designing with this device, ensure the decoupling network uses at least two capacitors per supply pin (one bulk plus one 100 nF) and that the high-voltage analog pins adhere to NXP's ESD-robust PCB layout rules. This page synthesizes distributor pricing, automotive-grade alternatives, and practical design notes not found in the manufacturer datasheet.

USD $5,30 Em estoque

S912ZVLA12F0MLC

S912ZVLA12F0MLC - S12Z 128KB Flash MagniV MCU | NXP | Automotive LIN

The NXP S912ZVLA12F0MLC is a 16-bit S12Z MagniV mixed-signal microcontroller from the S12ZVL platform, featuring 128KB of Flash memory, a 32MHz S12Z core, and an integrated 12V-to-5V voltage regulator with LIN physical-layer transceiver in a 32-pin LQFP (7x7 mm) package. It is automotive-qualified to -40°C to +125°C and targets space-constrained automotive LIN nodes where on-board power conversion and bus connectivity must coexist with application logic on a single die. What is a MagniV mixed-signal MCU? The MagniV family from NXP combines an S12/S12Z microcontroller core with high-voltage analog and LIN/CAN physical-layer peripherals in a single IC. In the system hierarchy this part sits at: microcontroller (MCU) -> mixed-signal MCU -> automotive microcontroller -> embedded controller. MagniV parts are designed to reduce external components in body-electronics and sensor-node designs by absorbing the 12V LDO and the LIN transceiver into the MCU. Key features include 128KB Flash (128K x 8), 32MHz S12Z CPU core with CISC instruction set, on-chip 12V-to-5V regulator, integrated LIN transceiver, 10-bit ADC, automotive temperature grade (-40°C to +125°C), and a 32-pin LQFP package. The integrated voltage regulator accepts direct 12V automotive battery input and supplies the internal 5V logic, eliminating the need for an external LDO in the typical LIN sensor node. Technical depth: the S12Z core is an enhanced 16-bit CISC architecture with improved addressing, hardware multiply/divide, and a more efficient instruction pipeline than legacy HC12/S12X cores. The integrated LIN transceiver is compliant with LIN 2.x/ISO 17987 physical-layer specifications, allowing the part to communicate directly on the LIN bus with no external transceiver IC. On-chip peripherals (timers, PWM, SCI, SPI) provide the typical motor/sensor control capability required for body-electronics modules. Typical applications include automotive LIN sensor nodes (seat occupancy, rain/light, HVAC flap), body controllers, simple motor controllers, and 12V-powered smart actuators. The S12ZVL's integrated 12V LDO + LIN transceiver make it especially well suited to cost-sensitive body-electronics nodes where PCB area and BOM count are critical. When designing with this device, verify the integrated 12V-to-5V regulator's thermal dissipation budget at full LIN current. The LQFP-32 (7x7) package has limited theta_JA headroom; at 12V input and 50mA load the part dissipates ~350mW, which is acceptable without a heatsink, but higher load currents demand thermal verification. This page synthesizes distributor pricing, same-package alternatives from the S12ZVL family, and practical design notes not found in the manufacturer datasheet alone.

USD $9,90 Em estoque

S912ZVLA64F0MLF

S912ZVLA64F0MLF - S12Z MagniV 64KB Flash 32MHz MCU | NXP

The NXP Semiconductors S912ZVLA64F0MLF is a 16-bit automotive microcontroller from the S12 MagniV mixed-signal MCU family, featuring an S12Z core running at 32 MHz with 64 KB of on-chip Flash memory in a 48-pin LQFP (7x7 mm) package. It is automotive-qualified (AEC-Q100) and operates across a -40C to +125C temperature range, targeting space-constrained automotive LIN nodes. The integrated peripherals include a 12V-to-5V voltage regulator and a LIN physical-layer transceiver that consolidate what would otherwise require multiple external ICs. An automotive LIN microcontroller is a mixed-signal MCU purpose-built for Local Interconnect Network (LIN) nodes in vehicle body electronics. The LIN bus is a low-cost single-wire serial protocol standardized under ISO 17987, widely used for non-critical body and comfort subsystems (window lifters, mirror adjusters, seat controllers, HVAC dampers). At a higher level, this part belongs to the hierarchy: automotive MCU -> mixed-signal MCU -> 16-bit MCU -> S12 MagniV family -> NXP semiconductor IC. By integrating the LIN transceiver and a 12V-tolerant regulator on-die, the S12ZVL family eliminates the need for external bus-driver ICs and reduces BOM cost on the smallest LIN slaves. Key features include 64 KB Flash, 32 MHz S12Z CPU core, 1 KB EEPROM, 4 KB RAM, integrated LIN 2.x/SAE J2602 transceiver with bus-pin protection, integrated 5V LDO regulator accepting 6V to 18V supply, and on-chip CAN (msCAN) and SPI/SCI peripherals. The 48-LQFP-7x7 footprint is shared across the S12ZVL sub-family, enabling drop-in scalability between 8 KB, 16 KB, 32 KB, 64 KB, and 128 KB Flash options. The S12Z core uses a 32-bit instruction path with 16-bit arithmetic to optimize code density and execution speed for byte-oriented automotive software stacks, while keeping the addressable memory model compatible with the earlier S12 architecture. The integrated Vreg and LIN phy reduce PCB area and EMI compared to multi-chip LIN slave implementations. Typical applications include automotive body control modules such as window lifters, seat controllers, HVAC damper actuators, mirror adjusters, sunroof controllers, ambient lighting LED drivers, and simple sensor interfaces that communicate over LIN back to a central body controller. The AEC-Q100 Grade 0 qualification and 12V battery-direct tolerance make it well suited for connection directly to the automotive 12V bus. When designing with this part, ensure the LIN bus load and termination meet SAE J2602 specifications, and verify that the supply decoupling handles cranking transients (ISO 7637-2 pulses). The integrated Vreg caps the dissipation envelope, but PCB copper area should still be sized for sustained wake-up currents. This page synthesizes authorized distributor pricing, drop-in S12ZVL family alternatives, and practical PCB-decoupling notes not found on the manufacturer product page alone.

USD $2,41 Em estoque

S912ZVMC12F1MKH

S912ZVMC12F1MKH - S12Z MagniV 16-bit MCU, 128KB Flash | NXP

The NXP S912ZVMC12F1MKH is a 16-bit S12Z MagniV microcontroller featuring 128 KB of embedded Flash, an integrated 12V analog supply regulator, and a high-speed analog front-end, all housed in a 64-pin HLQFP (10x10) package with automotive-grade qualification. The device operates at a 50 MHz internal bus clock, integrates 2 KB of SRAM and 1 KB of EEPROM, and is targeted at motor control and DC-DC power conversion applications. As a member of the S12Z MagniV family, this device belongs to the broader category of 16-bit microcontrollers (MCU), a class of embedded processors offering an efficient balance between deterministic performance, code density, and peripheral integration. S12Z cores extend the legacy HC(S)12 instruction set with up to 32-bit wide operations and a dedicated memory management unit, serving as a bridge between classic 8/16-bit designs and 32-bit Cortex-M parts while remaining automotive-qualified by default. Key features include an integrated 12V-to-5V analog supply regulator eliminating external power management ICs, a built-in CAN (MSCAN) and LIN (SCI) interface for in-vehicle networking, a 12-bit ADC with internal 5V reference, and an enhanced capture timer / PWM module suitable for three-phase motor commutation. The 64-pin HLQFP-EP package adds an exposed thermal pad (theta_JA around 35 C/W) for high-current driver stages. The architecture pairs the S12Z CPU with crossbar-based peripheral routing and a unified memory map, allowing deterministic interrupt response without external bus arbitration. Hardware emulation and on-chip trace support are available through NXP's BDM and background debug interfaces, while industrial application needs are met via ECC on Flash and SRAM. Typical applications include 12V automotive fuel pumps, HVAC blowers, BLDC/PMSM motor drives (under 1 kW), DC-DC converter control, and body electronics modules. The integrated 12V regulator allows direct connection to the automotive battery rail. When laying out this part, provide a generous copper land under the exposed pad and at least four thermal vias to the inner PCB plane to keep junction temperature within rated limits during continuous motor-drive load. Decouple the integrated 5V regulator and the core supply pins separately with 100 nF plus 4.7 µF capacitors as shown in the NXP reference design. This page consolidates distributor pricing, drop-in NXP S12Z alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers select, source, and integrate the S912ZVMC12F1MKH.

USD $6,20 Em estoque

S912ZVMC12F3WKH

S912ZVMC12F3WKH - MagniV 16-bit S12Z MCU, 128KB Flash | NXP

The NXP S912ZVMC12F3WKH is a 16-bit S12 MagniV mixed-signal microcontroller from the S12ZVM family, integrating 128 KB of Flash memory and running the S12Z CPU core at up to 50 MHz, housed in a 64-pin HLQFP (10x10 mm) package with exposed thermal pad. What is a MagniV mixed-signal microcontroller? A MagniV device is a single-chip automotive MCU that combines the S12/S12Z CPU core with high-voltage analog peripherals - most importantly an on-chip 12 V to 5 V voltage regulator and a LIN physical layer. Within the broader taxonomy, S12ZVM sits as: 16-bit MCU -> automotive microcontroller -> mixed-signal MCU -> embedded controller -> semiconductor. The "MagniV" branding means the part is intended for direct connection to a 12 V automotive bus without an external 5V regulator, dramatically shrinking the BOM for body and motor-control ECUs. Key features of the S912ZVMC12F3WKH include 128 KB (128K x 8) of Flash program memory, an integrated 12 V to 5 V LDO for direct automotive battery operation, a LIN physical interface for in-vehicle networking, and a -40C to +150C operating temperature range (AEC-Q100 automotive grade). The device integrates gated timer units (GTM/ECT) suitable for 3-phase motor control, plus ADC, PWM, and an enhanced capture timer. Architecturally, the S12ZVM combines a CISC S12Z CPU with the high-voltage analog front end described in the NXP reference manual. The on-chip regulator eliminates the external 12V-to-5V buck or LDO that typical 5V microcontrollers still require, reducing PCB area by up to 30 percent in sensored BLDC/PMSM/sensorless motor designs. Typical applications include 3-phase brushless DC (BLDC) motor control for automotive auxiliary pumps and fans, permanent magnet synchronous motor (PMSM) drives, switched reluctance motor (SRM) control, body electronics modules with LIN connectivity, and industrial motor-control platforms up to 12V supply. When designing with this part, carefully observe the high-voltage analog layout guidelines in the S12ZVM reference manual: keep the exposed pad soldered to a copper pour, route the LIN bus traces with controlled impedance, and place the 12V bulk capacitor as close to the HV supply pin as possible to handle load-dump transients. This page synthesizes distributor pricing, drop-in same-package S12ZVM and S12ZVC family alternatives, and practical high-voltage mixed-signal design notes that complement (not duplicate) the manufacturer datasheet.

USD $6,15 Em estoque

S912ZVMC64F3MKH

S912ZVMC64F3MKH - S12Z 50MHz 64KB Flash MCU | NXP MagniV

The NXP Semiconductors S912ZVMC64F3MKH is a 16-bit S12Z MagniV microcontroller featuring a 50MHz S12Z core, 64KB Flash, 4KB RAM, and integrated CANbus/SCI/SPI connectivity, housed in a 64-pin HLQFP (10x10 mm) package with exposed thermal pad. Designed for space-constrained automotive body and chassis applications, the S12 MagniV family integrates the S12Z CPU core together with high-voltage analog and CAN physical interface blocks on a single die, eliminating external transceiver and voltage-regulator components. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), working memory (RAM), and a configurable set of peripherals such as timers, ADC, communication controllers, and GPIO. Within the broader semiconductor taxonomy, an MCU belongs to the logic IC family, then to the embedded processor hierarchy, then to the automotive-qualified sub-class when AEC-Q100 qualification applies. The S12 MagniV line is purpose-built for the in-vehicle networking segment where single-chip integration reduces PCB area, BOM count, and bill-of-materials cost compared with a discrete MCU plus external LIN/CAN transceiver approach. Key features of the S912ZVMC64F3MKH include 64KB on-chip Flash (64K x 8), 4KB RAM, 512 bytes EEPROM, 31 GPIO, a 10-channel PWM module, DMA, watchdog, and power-on reset. The integrated CANbus controller supports both standard and extended frame formats and is widely used in automotive body control modules such as HVAC, lighting, and door/window controllers. Operating temperature spans -40C to +125C, qualifying the device for AEC-Q100 Grade 1 automotive environments. Architecturally the device pairs the S12Z CPU (an enhanced 16-bit core with improved instruction throughput over the legacy S12X) with on-chip voltage regulator and CAN PHY, enabling direct 12V battery connection with minimum external components. The single-die integration reduces quiescent current paths and improves electromagnetic compatibility versus discrete solutions. Typical applications include automotive HVAC control modules, body controllers, door modules, seat controllers, lighting controllers, and small DC motor control nodes where the CAN interface, small footprint, and integrated high-voltage tolerance simplify design. The exposed pad on the LQFP-64 package provides a low thermal resistance path for sustained processor activity. Designers should note that the -40C to +125C operating range supports under-hood and cabin mounting, while the integrated 5V regulator powers both the internal logic and external sensors. Proper decoupling of the high-voltage analog supply (VDDX) and the digital logic supply (VDDR) is essential for clean CAN signaling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3,20 Em estoque

Subcategorias

Produtos (32725)