Circuitos Integrados

Subcategorias

📁 ADC/DAC 2.700+ produtos 📁 CIs Amplificadores 1.100+ produtos 📁 Codecs de Áudio 18 produtos 📁 CIs de Áudio 2 produtos 📁 Relógio e Temporização 480+ produtos 📁 Comparator ICs 0 produtos 📁 DSP 1.000+ produtos 📁 CIs de Aquisição de Dados 2 produtos 📁 Potenciômetros Digitais 4 produtos 📁 Drivers e Controladores de Display 1 produtos 📁 FPGA & CPLD 6.800+ produtos 📁 CIs de Interface 2.300+ produtos 📁 Drivers de LED 1 produtos 📁 CIs Lógicos 360+ produtos 📁 CIs de Memória 870+ produtos 📁 Microcontroladores 19.000+ produtos 📁 Microprocessadores 4 produtos 📁 Drivers de Motor 1 produtos 📁 Outros 1 produtos 📁 Sensor and Detector Interfaces 1 produtos 📁 CIs Especializados 15 produtos 📁 CIs de Vídeo 13 produtos

Produtos (35.000+)

TMS320C51PZ80 - 16-Bit DSP with 50 ns Execution | Texas Instruments
TMS320C51PZ80

TMS320C51PZ80 - 16-Bit DSP with 50 ns Execution | Texas Instruments

The Texas Instruments TMS320C51PZ80 is a 16-bit digital signal processor from the TMS320C5x family, featuring single-cycle instruction execution times of 20 ns, 25 ns, 35 ns, and 50 ns for 5 V operation and 25 ns, 40 ns, and 50 ns for 3 V operation. The device is supplied in a 100-pin plastic quad flat package, designated PZ, for surface-mounted DSP and signal-processing designs. A digital signal processor is a specialized microprocessor architecture optimized for recurring numerical operations such as multiplication, accumulation, filtering, Fourier analysis, and waveform generation. Within the semiconductor hierarchy, a DSP is a microprocessor and a system-level signal-processing IC. Unlike a general-purpose processor, the TMS320C51 architecture emphasizes predictable single-cycle execution and single-cycle multiply-accumulate operations, which are fundamental requirements in real-time audio, control, communications, and industrial signal-processing systems. The most important verified characteristics are the 16-bit CPU, the available 20 ns to 50 ns execution-time options, and support for both 3 V and 5 V operation. The processor family documentation also identifies single-cycle 16-bit multiply-accumulate execution and a maximum addressable memory capability. These features allow software routines to process sampled data at a fixed computational rate, provided that memory, peripheral, and external-interface timing requirements are verified against the manufacturer documentation for the selected device revision. The TMS320C51PZ80 is positioned for embedded real-time workloads where deterministic instruction timing and 16-bit arithmetic are important. Potential uses include audio signal processing, communications, industrial control, instrumentation, speech processing, and motor-control-related algorithms. A design should account for external program and data memory requirements, address decoding, clock generation, reset behavior, and the electrical limits associated with the specific 3 V or 5 V operating condition. The PZ package provides 100 external connections and is mounted using standard surface-board assembly methods. Because the verified sources provide only a family-level pinout reference rather than a complete, revision-specific pin assignment, engineers should download and compare the official TMS320C51 datasheet before layout release, especially when using the device in a new PCB design. The primary design trade-off is that the TMS320C51PZ80 offers a specialized DSP architecture and legacy-compatible integration rather than the software ecosystem and peripheral integration of a contemporary microcontroller. Choose it when an existing TMS320C5x design must be reproduced, a fixed-cycle DSP workload is central to the system, or the 100-pin PZ package and legacy support requirements outweigh the benefits of a modern mixed-signal MCU. This page consolidates the verified distributor pricing, family specifications, source links, replacement guidance, and engineering-focused selection notes. Because the available web evidence does not identify five distinct pin-compatible alternatives, this page does not invent substitute DSPs to satisfy a comparison count.

Cotação Contato
TMS320C52PJ57 - 57 MHz 16-Bit DSP | Texas Instruments | Signal Processing
TMS320C52PJ57

TMS320C52PJ57 - 57 MHz 16-Bit DSP | Texas Instruments | Signal Processing

The Texas Instruments TMS320C52PJ57 is a 16-bit digital signal processor built around the TMS320C5x CPU, with a listed clock frequency of 57.14 MHz and a 100-pin PQFP package. The processor provides single-cycle 16-bit multiply-accumulate operation and a maximum addressable memory capability of 64K 16-bit words, making it suitable for demanding audio, communications, control, and industrial signal-processing systems. Its architecture belongs to the embedded DSP > fixed-point signal processor > real-time signal-processing IC hierarchy. A digital signal processor is a specialized semiconductor that executes filtering, Fourier analysis, modulation, waveform generation, and other arithmetic-intensive algorithms in real time. Unlike a general-purpose microprocessor, the TMS320C5x CPU is organized around efficient multiply-accumulate operations and dedicated memory spaces. This architecture reduces instruction overhead in loop-intensive signal-processing routines and helps designers achieve predictable processing throughput. The verified datasheet information identifies a powerful 16-bit TMS320C5x CPU, a 57.14 MHz operating frequency, and instruction execution times of 25 ns for 5 V operation or 40 ns for 3 V operation in the applicable device configurations. The listed 28.5 MIPS figure reflects the processor's parallel instruction capability. The device also provides 16-bit multiply/add support and can address 64K 16-bit words, supporting compact algorithms that require deterministic sampling-rate processing. The TMS320C52PJ57 combines a floating-point-capable DSP core with external memory interfaces and dedicated peripheral functions. These resources support sample-oriented systems in which data is transferred from converters or serial interfaces into external memory and then processed by hardware-efficient algorithms. Because the available verified results do not expose the complete timing table, memory interface details, electrical limits, or complete pin map, engineers should consult the manufacturer datasheet before finalizing clocks, reset circuits, bus timing, and PCB constraints. Typical applications include digital audio processing, speech and communication systems, industrial control, instrumentation, motor control, and embedded signal-processing modules. The 57.14 MHz clock and 28.5 MIPS rating make the processor particularly relevant to designs that must perform fixed-point or floating-point filtering at controlled latency. It can also serve as an educational or legacy-maintenance platform when source code and surrounding board designs already use the TMS320C5x architecture. Designs must preserve the processor's required supply rails, clock quality, reset behavior, memory interface layout, and decoupling requirements. The verified results do not provide definitive capacitance, voltage, or timing values, so those details must not be inferred from the 57.14 MHz headline specification. Procurement should also distinguish the original manufacturer device from aftermarket inventory and verify the exact package marking before assembly. This page consolidates the verified distributor-search results, identifies documented package and processor attributes, and provides practical alternatives and sourcing guidance beyond a basic distributor listing. It distinguishes verified facts from missing electrical and pin-level data so engineers can evaluate this legacy DSP without introducing unsupported assumptions into a production design.

Cotação Contato
TMS320C52PZ - 16-Bit 100 MHz DSP | Texas Instruments
TMS320C52PZ

TMS320C52PZ - 16-Bit 100 MHz DSP | Texas Instruments

Texas Instruments TMS320C52PZ is a 16-bit floating-point digital signal processor rated at 100 MHz and 50 MIPS, supplied in a 100-pin LQFP package. The part is identified in verified listings as a Texas Instruments DSP with single-cycle 16-bit multiply/accumulate capability and operation suited to demanding real-time signal-processing workloads. A digital signal processor is a specialized microprocessor architecture optimized for arithmetic-intensive algorithms. Its hardware multipliers, parallel processing capabilities, and deterministic execution allow filtering, Fourier analysis, speech processing, and control loops to run faster than general-purpose software approaches. In the product hierarchy, the TMS320C52 belongs to the Texas Instruments TMS320 C5x DSP family and provides an upgrade path for designs requiring more processing capability than earlier C2x and C3x devices. The verified data identifies the CPU as 16-bit floating-point and specifies a 100 MHz clock, 50 MIPS throughput, and a 100-pin LQFP package. The processor's single-cycle 16-bit multiply/accumulate operation is especially important for recursive filters and other DSP kernels that repeatedly perform multiply and add sequences. Its architecture can reduce instruction count compared with software implementations that use general-purpose processors. The TMS320C52 family operates from a 5 V supply at 25 ns, 35 ns, or 50 ns instruction-cycle ratings and from a 3 V supply at 25 ns, 40 ns, or 50 ns ratings, as reported in the manufacturer datasheet excerpt. The verified product summaries also identify 16-bit processing and 50 MIPS performance, making the device relevant to industrial control, communications, audio, instrumentation, and embedded signal-processing systems. Designers should preserve the established LQFP-100 footprint and verify every signal, supply, and timing requirement against the complete manufacturer datasheet before layout or firmware migration. TMS320C52PZ is an older architecture, so long-term availability, software-tool compatibility, and required peripheral behavior must be confirmed for production programs. This page combines verified distributor and manufacturer-linked source information with practical selection guidance, package constraints, and application context. It distinguishes exact drop-in alternatives from merely functional DSP options, helping engineers make procurement and redesign decisions without overlooking footprint, firmware, and lifecycle risks.

Cotação Contato
TMS320C52PZA 16-Bit DSP, 100-Pin PZ | Texas Instruments
TMS320C52PZA

TMS320C52PZA 16-Bit DSP, 100-Pin PZ | Texas Instruments

The Texas Instruments TMS320C52PZA is a 16-bit digital signal processor in the TMS320C5x family, designed for industrial embedded signal-processing systems and offered in a 100-pin gull-wing package. According to the verified manufacturer-family data, the processor provides single-cycle instruction execution times of 25 ns, 35 ns, and 50 ns for 5 V operation, while 3 V operation supports 25 ns, 40 ns, and 50 ns timing. The device is identified by distributors as a digital signal processor (DSP), and the package information specifies 100 terminals, package code LFQFP, a square package shape, and industrial temperature grading. A digital signal processor is a microprocessor optimized for repeated mathematical operations on streaming or block data. In the hierarchy of electronic components, a DSP is a semiconductor and embedded processor used to implement filtering, Fourier analysis, modulation, control, speech, audio, communications, and other real-time algorithms. Unlike a general-purpose processor whose scheduling may vary with the workload, this DSP architecture emphasizes deterministic instruction timing and efficient arithmetic execution for high-throughput signal processing. The verified family data identifies a powerful 16-bit TMS320C5x CPU and single-cycle multiply/accumulate capability. The processor is therefore suited to designs that require predictable numerical throughput and direct control of audio, communications, or industrial control signals. The available verified material does not provide a complete frequency, memory, serial-interface, or electrical-limit table for this exact ordering code, so those values should be confirmed in the manufacturer datasheet before final design release. The TMS320C52PZA is listed by DigiKey, Octopart, and other distributors, while the available search results also point to the Texas Instruments datasheet family and an indexed PDF. The package designation LFQFP with 100 terminals matches the library key lqfp-100, but the supplied snippets do not expose the complete pin names, so a complete public pinout cannot be reproduced without risking errors. Typical application domains include industrial signal conditioning, communications, audio processing, control systems, and embedded instrumentation. The processor can be paired with external memory, analog-to-digital converters, digital-to-analog converters, interface transceivers, and power regulators when a system requires deterministic DSP performance and a dedicated numeric processing engine. Designers should verify voltage, clock, memory, peripheral, and timing requirements against the exact TMS320C52PZA datasheet. They should also confirm the correct package footprint, exposed thermal behavior, external memory interface, and signal-integrity layout before committing a layout to production. This page combines verified distributor information, family-level technical data, sourcing context, and engineering caveats without substituting unsupported values. This product page distinguishes confirmed TMS320C52PZA facts from unavailable parameters, provides application guidance, and documents the sourcing and compatibility limitations that require engineering review.

Cotação Contato
TMS320C53PQ57 - 16-Bit DSP, 50 ns, 132-BQFP | Texas Instruments
TMS320C53PQ57

TMS320C53PQ57 - 16-Bit DSP, 50 ns, 132-BQFP | Texas Instruments

The Texas Instruments TMS320C53PQ57 is a 16-bit digital signal processor built around the TMS320C5x CPU architecture and supplied in a 132-BQFP package. The processor supports single-cycle instruction execution with reported execution times of 25 ns, 35 ns, or 50 ns for 5 V operation, and 25 ns, 40 ns, or 50 ns for 3 V operation. Its core includes a single-cycle 16-bit multiply/add capability and supports a maximum addressable data space of 16 bits. A digital signal processor, or DSP, is a microprocessor architecture optimized for recurring numerical operations such as filtering, convolution, Fourier analysis, and waveform generation. Within the broader semiconductor hierarchy, a DSP is a specialized microprocessor and a signal-processing IC. Unlike a general-purpose processor that may execute a complex instruction sequence for every arithmetic task, this architecture is designed to sustain predictable signal-processing throughput. The TMS320C53 family therefore belongs in audio, communications, control, instrumentation, and embedded signal-processing systems where deterministic operation is valuable. The available family information identifies a powerful 16-bit TMS320C5x CPU with single-cycle instruction execution. The 16-bit multiplier and accumulator are important for digital filtering and real-time arithmetic, while the C5x execution characteristics help software developers estimate loop timing and task latency. Exact clock frequency, memory configuration, peripheral inventory, voltage limits, and electrical ratings are not present in the supplied verified data and must be confirmed from the complete manufacturer datasheet before schematic capture or firmware deployment. The target is identified as a 132-BQFP packaged DSP. The BQFP package provides a high pin count suitable for a processor with numerous address, data, control, memory, and peripheral connections. Because the supplied source set does not provide a complete pinout or mechanical drawing, the package footprint must be verified against the official TMS320C53 documentation. The DSP is positioned for industrial embedded processing, audio and speech processing, communications signal conditioning, industrial control, measurement, and instrumentation applications. The key engineering consideration is that this is a legacy TMS320C5x processor rather than a general-purpose microcontroller. Software, memory-interface, peripheral, and development-tool compatibility must therefore be evaluated separately from raw arithmetic throughput. Designers should verify the supported clock, RAM and ROM organization, external-memory interface, host-port requirements, and pin multiplexing before selecting it for a new design. This page consolidates the verified distributor and manufacturer-related search results, package identification, execution-time information, sourcing links, and drop-in-replacement constraints. It also separates confirmed facts from parameters that still require datasheet verification, helping engineers compare the TMS320C53PQ57 without treating incomplete marketplace snippets as complete technical specifications.

Cotação Contato
TMS320C53PQ80 - 80 MHz 16-Bit Digital Signal Processor | Texas Instruments
TMS320C53PQ80

TMS320C53PQ80 - 80 MHz 16-Bit Digital Signal Processor | Texas Instruments

The Texas Instruments TMS320C53PQ80 is a 16-bit fixed-point digital signal processor operating at up to 80 MHz, with a 16-bit external data bus and 4,128 RAM words, housed in a 132-pin gull-wing QFP package. It is designed for high-throughput signal-processing applications that require deterministic arithmetic, parallel peripherals, and flexible external memory or peripheral interfacing. The TMS320C5x architecture combines a 16-bit CPU, single-cycle multiply-accumulate capability, and dedicated signal-processing resources for communications, control, audio, and industrial processing systems. The TMS320C53 belongs to the TMS320C5x family of digital signal processors, which are semiconductor devices optimized for filtering, Fourier analysis, modulation, demodulation, waveform generation, and other mathematically intensive workloads. Unlike a general-purpose microcontroller, the device is designed around predictable instruction execution and dedicated hardware for real-time signal processing. Its architecture is suitable when processing latency and throughput are more important than software flexibility. Key verified features include an 80 MHz maximum clock frequency, a 16-bit fixed-point CPU, 4,128 RAM words, a 16-bit external data bus, and a 132-pin QFP package. The TMS320C53PQ80 is identified as a commercial-temperature, gull-wing package device. The QFP format provides a large number of external signal, memory, control, and power connections while supporting conventional surface-mount assembly. The processor is appropriate for telecommunications and signal-processing equipment, industrial automation, audio and speech systems, motor control, instrumentation, and embedded communications. Its 80 MHz clock provides the timing base for high-speed arithmetic, while the external bus allows systems to connect additional memory or peripherals when internal resources are insufficient. The device should be selected only when software and board design are prepared for a fixed-point DSP architecture and its documented pin, memory, and timing requirements. Design work must account for the QFP footprint, power-supply sequencing, clock quality, decoupling, and the 16-bit external data interface. The commercial-temperature designation and package construction are relevant for industrial or consumer environments where the device remains within its specified operating limits. Exact operating-temperature limits, supply-voltage details, memory-map details, and electrical timing values require confirmation against the manufacturer datasheet before production release. This product page consolidates verified distributor and technical information, pricing context, package details, comparison fields, and practical engineering guidance. It is intended to support component selection and design planning, while the manufacturer datasheet remains the controlling source for pin assignments, timing, electrical limits, and production implementation.

Cotação Contato
TMS320C53SPZ - 16-Bit 100MHz DSP | Texas Instruments | Signal Processing
TMS320C53SPZ

TMS320C53SPZ - 16-Bit 100MHz DSP | Texas Instruments | Signal Processing

The Texas Instruments TMS320C53SPZ is a 16-bit floating-point digital signal processor operating at 100 MHz, delivering 50 MIPS in a 100-pin LQFP package. It belongs to the TMS320C5x processor family and is designed for demanding real-time signal-processing workloads. Verified search data identifies the device as a digital signal processor with a 16-bit architecture, 100 MHz clock capability, 50 MIPS performance, and a 100-pin LQFP package. A digital signal processor, or DSP, is a semiconductor optimized for filtering, Fourier analysis, modulation, control, and other operations that repeatedly process sampled data. In the broader electronics hierarchy, a DSP is a processor, then a digital IC, then a semiconductor and embedded-computing component. Its architecture emphasizes predictable execution of mathematically intensive algorithms, often with dedicated multiply and memory functions that differ from general-purpose microprocessors. The TMS320C53SPZ offers a 100 MHz operating point and 50 MIPS throughput according to the verified distributor listing. The TMS320C5x family is described as supporting 16-bit single-cycle instruction execution and a 16-bit multiply/add capability, but the exact TMS320C53SPZ memory size, supply voltage, peripheral configuration, and thermal limits are not present in the supplied data and must be confirmed from the manufacturer documentation before design release. Typical uses include audio and communications signal processing, industrial control, instrumentation, speech processing, modulation, and embedded filtering. A design team should select this processor when deterministic numerical processing and compatibility with the TMS320C5x software ecosystem are more important than the broader peripheral integration or low power consumption associated with newer DSP families. The 100-pin LQFP also provides a large lead count for external memory and interface connections. The principal design consideration is verification: the available search snippet confirms the processor class and headline timing, but it does not provide a complete electrical specification table or a trustworthy pin-by-pin description. Before layout or firmware deployment, obtain the official Texas Instruments datasheet, confirm clock and memory requirements, inspect the LQFP footprint, and validate signal integrity and thermal margins. This page deliberately avoids filling those gaps with unverified values. This product page consolidates verified distributor facts, source links, package information, application context, and unresolved-data warnings. It is intended to support early component selection and sourcing discussions, while final engineering decisions should be based on the complete manufacturer datasheet and approved device documentation.

Cotação Contato
TMS320C6211B - 167MHz 1333MIPS Fixed-Point DSP | Texas Instruments
TMS320C6211B

TMS320C6211B - 167MHz 1333MIPS Fixed-Point DSP | Texas Instruments

The Texas Instruments TMS320C6211B is a high-performance fixed-point digital signal processor (DSP) based on the advanced VelociTI very-long-instruction-word (VLIW) architecture, executing eight 32-bit instructions per cycle at up to 167 MHz for 1333 MIPS with a 6-ns instruction cycle time, housed in a 256-pin BGA (GFN) package. A fixed-point DSP is a specialized microprocessor optimized for real-time signal processing workloads such as FIR/IIR filtering, convolution, FFT transforms, and multichannel audio or telecom processing, where numeric data is represented in integer or fixed-point format. Within the processor hierarchy, the C6211B belongs to the TMS320C62x DSP core family inside the broader TMS320 DSP platform from Texas Instruments, a platform widely deployed in telecommunications infrastructure, audio, and industrial control systems. Key differentiating features include eight-way VLIW parallelism (eight 32-bit instructions per cycle), dual speed grades of 150 MHz (1200 MIPS) and 167 MHz (1333 MIPS), pin compatibility with the TMS320C6211, TMS320C6711, and TMS320C6711B devices, and an extended temperature rating unique to the C6211B variant for harsh-environment deployment. Architecturally, the VelociTI VLIW core issues multiple parallel operations per cycle without hardware dynamic scheduling, shifting complexity to the compiler and enabling deterministic, cycle-efficient execution of compute-intensive algorithms. The device integrates 256KB of on-chip SRAM, a 32-bit external memory interface (EMIF) for SBSRAM/SDRAM, and multiple serial ports for real-time multichannel I/O, delivering an excellent price/performance point for multichannel and multifunction applications. Typical applications include telecom infrastructure voice/data channel processing, multichannel audio processing, and industrial real-time control where the extended temperature range and deterministic VLIW core are decisive. The shared pinout also allows a common PCB design to accept either fixed-point C6211B or floating-point C6711B parts. For design, a key consideration is the separate core and I/O power rails with careful decoupling, plus signal-integrity-aware PCB layout for the 167-MHz clock rates and high-ball-count BGA escape routing. This page synthesizes distributor sourcing data, pin-compatible drop-in alternatives from the same TI C62x/C67x family, and practical design notes not found in a single manufacturer datasheet, with pricing as of 2026-08-30.

Cotação Contato
TMS320C6678ACYPA - Octo-Core C66x DSP 1.25GHz | Texas Instruments
TMS320C6678ACYPA

TMS320C6678ACYPA - Octo-Core C66x DSP 1.25GHz | Texas Instruments

The Texas Instruments TMS320C6678ACYPA is a high-performance octo-core fixed and floating-point digital signal processor (DSP) based on the KeyStone multicore architecture, running eight C66x CorePac cores at up to 1.25 GHz for 10 GHz of aggregate processing power in an 841-pin FCBGA (CYP) package with a 24x24 mm footprint, rated from -40C to +100C. A digital signal processor is a specialized microprocessor optimized for real-time numerical computation such as filtering, FFT, and convolution. The C66x core combines fixed-point and floating-point execution, spanning the hierarchy from single-core DSPs up to multicore system-on-chips. Within the broader power/performance hierarchy, this DSP delivers real-time throughput above general-purpose processors while retaining full C-programmability, and it complements FPGAs in high-throughput signal chains. Key features include eight C66x cores with 32-/64-bit architecture, 4 MB of on-chip L2 memory, 32 KB L1P and 32 KB L1D per core, and a 64-bit DDR3 external memory interface. Multicore navigation peripherals - Hyperlink, SRIO, and EMAC - enable efficient inter-processor communication and high-bandwidth I/O for data-intensive workloads. Technically, the KeyStone architecture provides a high-bandwidth internal interconnect (TeraNet) so cores share data without bottlenecks. The C66x instruction set includes advanced FFT and Viterbi acceleration instructions, boosting throughput for communication physical-layer processing, radar pulse compression, and beamforming with high dynamic-range floating-point math. Typical applications include radar and sonar processing, medical imaging (MRI, CT reconstruction), test and measurement instrumentation, industrial machine vision, and high-performance embedded computing. Floating-point capability suits algorithms demanding wide dynamic range, while the octo-core design scales performance by task distribution. Design consideration: power dissipation is significant at 1.25 GHz operation. Provide dedicated heatsinking and airflow, sequence the core, I/O, and SerDes rails correctly, and use clean PLL supply filtering per TI datasheet (SPRS691) layout guidance. This page synthesizes distributor pricing, drop-in speed-grade alternatives, design notes, and FAQ content not found together in the manufacturer datasheet.

Cotação Contato
TMS320C6678ACYPA25 - Octo-Core C66x DSP 1.25GHz | Texas Instruments
TMS320C6678ACYPA25

TMS320C6678ACYPA25 - Octo-Core C66x DSP 1.25GHz | Texas Instruments

The Texas Instruments TMS320C6678ACYPA25 is a high-performance octo-core fixed-and-floating-point digital signal processor (DSP) based on TI's C66x DSP core architecture, delivering up to 1.25 GHz per core and packaged in a 841-ball FCBGA (CYP) at 24x24 mm. The device integrates eight C66x cores with dedicated L1/L2 memory, hardware accelerators, and a rich set of high-speed peripherals including Serial RapidIO, PCIe Gen2, HyperLink, SGMII Gigabit Ethernet, and 64-bit DDR3 EMIF. A digital signal processor (DSP) is a specialized microprocessor whose architecture is optimized for the numeric-intensive, real-time workloads that general-purpose CPUs handle inefficiently — FIR/IIR filtering, FFTs, convolutions, matrix math, and baseband signal processing. The C66x family combines VLIW (very-long-instruction-word) dispatch with SIMD (single-instruction multiple-data) lanes, so each core can issue multiple parallel MACs per clock and process packed 16-bit or 32-bit data words in a single cycle. Fixed-point and IEEE-754 floating-point arithmetic are both native, eliminating scaling overhead. Compared to a generic microcontroller, the C66x delivers orders-of-magnitude higher throughput per watt for DSP kernels while still offering cache-coherent multi-core shared memory and a standard ARM-style toolchain. Key features of the TMS320C6678ACYPA25 include eight C66x cores at 1.25 GHz, 32 KB of L1 program cache and 32 KB of L1 data cache per core, 512 KB of configurable L2 cache per core with full ECC support, four lanes of Serial RapidIO v2.1, two PCIe Gen2 endpoints/root-complex ports, a HyperLink 50-Gbaud companion interface, dual SGMII Gigabit Ethernet MACs, I2C, SPI, UART, GPIO, sixteen 64-bit timers, and a 64-bit DDR3 EMIF with ECC supporting up to 8 GB of addressable memory. The device uses TI's 40-nm CMOS process and operates on a 1.0 V core rail with 1.5 V / 1.8 V I/O, drawing roughly 5–10 W under typical loads depending on core utilization and clock gating. On-die thermal sensors and per-core power-down modes let systems trade throughput against power for thermal envelopes in air-cooled chassis. Typical applications include LTE and WiMAX baseband processing, medical imaging (ultrasound beamforming, MRI reconstruction), military radar and electronic-warfare processing, test-and-measurement instrumentation, oil-and-gas seismic processing, and high-performance embedded computing payloads in aerospace and industrial systems. The HyperLink and Serial RapidIO fabrics also make the device a drop-in DSP node for heterogeneous multiprocessor boards using TI's Keystone multiprocessor topology. When designing with the TMS320C6678ACYPA25, allocate proper power-rail decoupling (low-ESL ceramics at every VDDS rail), enforce matched-length routing on the DDR3 byte lanes, and provide an external heat spreader or heatsink because the 841-ball FCBGA typically dissipates more than 5 W under sustained load. Use TI's MCSDK / Processor SDK to leverage validated board-support packages and BIOS real-time kernel examples. This page synthesizes distributor pricing, drop-in alternatives within the TMS320C66x family, and practical hardware design notes not found in the manufacturer datasheet, giving engineers an at-a-glance comparison set for procurement and architecture decisions.

Cotação Contato
TMS320C6748EZWT4 - 456MHz C674x DSP | Texas Instruments
TMS320C6748EZWT4

TMS320C6748EZWT4 - 456MHz C674x DSP | Texas Instruments

The Texas Instruments TMS320C6748EZWT4 is a low-power fixed- and floating-point digital signal processor built around a single C674x DSP core. It operates at up to 456 MHz, provides 3648 MIPS, and includes SATA connectivity. The processor is supplied in a 361-pin NFBGA ZWT package. Its architecture places it in the digital signal processor, real-time embedded processor, and semiconductor hierarchy for communications, industrial, and audio applications. A digital signal processor is a specialized semiconductor that executes mathematical operations in parallel-friendly architectures. Unlike a general-purpose processor, a DSP is optimized for filtering, transforms, signal analysis, modulation, and other repetitive calculations on streaming data. The C674x core combines fixed-point and floating-point processing, allowing control-oriented integer workloads and precision-oriented floating-point algorithms to share one platform. Key verified characteristics include a C674x processor core, one core, a 456 MHz maximum clock, 64-bit data-bus support, 8-bit and 16-bit data-bus support, 128 kB data RAM, and SATA connectivity. The verified distributor listing also identifies the part as a 361-pin NFBGA device. Detailed electrical limits, memory maps, peripheral inventories, and package dimensions were not included in the supplied source data and require consultation of the manufacturer datasheet. The C674x architecture is appropriate for high-throughput signal-processing workloads requiring deterministic execution. Its floating-point capability is valuable for filters, transforms, control loops, audio processing, and communications algorithms, while fixed-point support can reduce resource use in stages where integer arithmetic is sufficient. Integration with an applications-processor-oriented platform helps OEMs consolidate real-time processing and high-level control tasks. Typical applications include industrial control, communications infrastructure, audio and signal processing, test and measurement, and embedded systems that process continuous sensor or network data. SATA support can be relevant to systems that exchange data with storage devices, although the exact interface implementation and software requirements must follow the TI design documentation. A C674x development kit may also be used to develop and validate application firmware before hardware integration. For a new design, verify every power rail, clock, boot mode, memory interface, and high-speed serial connection against the official datasheet before layout begins. The 361-pin NFBGA requires fine-pitch PCB escape routing, controlled power delivery, and careful thermal design. Software should also account for initialization order, cache and memory behavior, peripheral pin multiplexing, and the processor's interrupt requirements.

Cotação Contato
TMS320C80GF - Multimedia Video DSP | Texas Instruments
TMS320C80GF

TMS320C80GF - Multimedia Video DSP | Texas Instruments

The Texas Instruments TMS320C80GF is a multimedia video digital signal processor in a 305-CPGA package. The supplied distributor record identifies it as a digital signal processor, while a related 60 MHz listing for TMS320C80GF60 establishes a concrete clock-rate reference for the GF60 suffix, not necessarily for the unsuffixed GF part. Its core application is high-throughput multimedia signal processing, where programmable arithmetic, parallel data paths, and dedicated accelerator resources can reduce host-processor workload. The exact processor clock, memory configuration, supply voltage, power consumption, and pin assignment for the unsuffixed TMS320C80GF were not present in the verified search results and require confirmation from the manufacturer datasheet. A digital signal processor is a programmable semiconductor optimized to execute repetitive mathematical operations on sampled or streamed data. In the broader hierarchy, a DSP is a processor and embedded controller, while this device is specifically positioned as a multimedia video processor. DSP engines commonly use fixed- or floating-point arithmetic to implement filtering, transforms, motion analysis, pixel processing, and other data-intensive algorithms. Compared with a general-purpose CPU executing the same workload, an application-specific DSP can improve throughput and reduce software overhead when its instruction set and parallel resources match the algorithm. The verified evidence identifies TMS320C80GF as a multimedia video DSP and confirms distributor availability, but it does not provide a complete electrical specification set. The related TMS320C80GF60 listing identifies a 305-CPGA package measuring 47.25 mm by 47.25 mm and operating at 60 MHz; those values must not be transferred to the unsuffixed GF variant without datasheet confirmation. Engineers should therefore distinguish the base GF orderable code from speed-grade or package-suffix variants when checking replacements. Typical uses include video transcoding, image and motion processing, video analytics, industrial inspection, surveillance-system preprocessing, and embedded multimedia test equipment. Such systems benefit from deterministic arithmetic and parallel data movement, provided firmware is adapted to the TMS320C80 architecture and external memory interfaces. The processor may also serve as a co-processor that extracts intensive signal-processing tasks from a host processor. Sourcing this legacy multimedia processor requires careful lifecycle and supply verification. DigiKey lists the GF device, Rochester Electronics is shown as the source, and other independent distributors report inventory, but the snippets do not establish exact stock quantity, unit price, or contractual availability. Procurement should confirm manufacturer status, date-code policy, authorized provenance, and whether the package is original, refurbished, or obsolete surplus. The key design step is obtaining the exact manufacturer documentation and confirming the unsuffixed GF configuration before schematic capture, memory-interface design, or thermal budgeting. This page deliberately avoids importing GF60-only data into TMS320C80GF and distinguishes verified distributor facts from parameters that still require datasheet confirmation.

Cotação Contato
TMS320C80GF50 - 50MHz Floating-Point DSP | Texas Instruments
TMS320C80GF50

TMS320C80GF50 - 50MHz Floating-Point DSP | Texas Instruments

The Texas Instruments TMS320C80GF50 is a 50 MHz floating-point digital signal processor in a 305-CPGA package measuring 47.25 mm by 47.25 mm. It is designed for multimedia video processing and combines dedicated digital signal processing with parallel processing capabilities for demanding image, video, and signal-analysis systems. The verified distributor listing identifies the device as a Floating Point Digital Signal Processor (DSP), while its large 305-terminal ceramic pin-grid package supports complex systems requiring extensive external memory and peripheral connectivity. This processor belongs to the digital signal processor hierarchy, where a DSP is a specialized microprocessor architecture optimized for filtering, transforms, motion analysis, multimedia arithmetic, and other data-intensive algorithms. A digital signal processor differs from a general-purpose microprocessor primarily through architecture and instruction handling tailored to repetitive numerical operations. In multimedia systems, these capabilities can support pixel processing, color conversion, motion estimation, image filtering, and video-frame analysis. The TMS320C80GF50's 50 MHz clock rating establishes its nominal operating frequency, while its floating-point processing designation identifies the numeric format supported for application workloads. The exact core architecture, memory organization, peripheral set, and instruction throughput require confirmation from the manufacturer datasheet before implementation. The most visible verified feature is the 305-CPGA package with 305 terminals and a square body measuring 47.25 mm by 47.25 mm. Such a package is materially larger than common leaded or surface-mount IC packages and is normally associated with high-complexity processors requiring numerous address, data, control, and power connections. A CPGA package also requires careful connector selection, insertion handling, alignment, and mechanical clearance around the processor. The package is not represented by the available compact package-diagram library, so this record uses the default package graphic and does not infer a pin map. The device's floating-point capability is significant for multimedia workloads because algorithms such as filtering, transforms, and motion estimation can require fractional arithmetic and a defined dynamic range. The 50 MHz frequency provides a concrete performance reference when comparing processor options, but application throughput should not be inferred from clock frequency alone. Bus width, memory bandwidth, accelerator architecture, cache behavior, and the compiler's code generation determine practical performance. Those details must be verified in the Texas Instruments data sheet and associated user guide. Typical uses include professional video processing, image acquisition, industrial inspection, communications signal processing, and embedded multimedia control. It may suit systems where deterministic numerical processing and a large parallel I/O interface are more important than minimizing package area, cost, or board complexity. A processor implemented on a multilayer PCB can also benefit from the short electrical connections and high pin density provided by a ceramic pin-grid package. The primary design consideration is that a 305-CPGA package is mechanically and electrically substantial. Board designers must verify connector availability, thermal requirements, via and escape-routing capacity, ground-plane distribution, and the exact pin assignment specified by the manufacturer. Because the supplied web results do not expose a complete verified pinout, this page does not reconstruct one from memory. The original datasheet remains the controlling source for signal names, power requirements, clocking, reset behavior, and electrical limits. This product record consolidates verified distributor availability, package information, family-level cross-reference findings, practical design guidance, and explicitly identified data gaps. It distinguishes confirmed facts from parameters that still require datasheet verification, helping engineers evaluate the TMS320C80GF50 without mistaking a processor-family relationship for guaranteed drop-in interchangeability.

Cotação Contato
TMS320C80GF60 - 60MHz Floating-Point DSP | Texas Instruments
TMS320C80GF60

TMS320C80GF60 - 60MHz Floating-Point DSP | Texas Instruments

The Texas Instruments TMS320C80GF60 is a 60 MHz floating-point digital signal processor packaged in a 305-contact ceramic pin-grid-array package measuring 47.25 mm by 47.25 mm. Its processor clock rate and floating-point processing architecture identify it as a parallel digital signal processor designed for demanding signal-processing workloads. The verified distributor listing describes the device specifically as a Floating Point Digital Signal Processor with 305 contacts and a square package shape. A digital signal processor is a specialized semiconductor that executes arithmetic operations on sampled signals. It belongs to the broader embedded processing hierarchy: digital signal processor, embedded processor, semiconductor, and electronic component. Unlike a general-purpose microprocessor, a DSP is optimized for filtering, transforms, and other repetitive numerical operations. The TMS320C80GF60 combines this signal-processing focus with floating-point arithmetic, making it applicable where numerical range and precision are important. The principal verified performance characteristics are its 60 MHz operating frequency, floating-point processing capability, and 305-contact CPGA package. The ceramic grid-array format provides a large number of package contacts compared with a typical surface-mount IC. This contact count can support the external memory, parallel interfaces, and control signals normally required by a high-performance parallel DSP, although the complete signal and pin assignments must be taken from the manufacturer data sheet. The 47.25 mm by 47.25 mm square package is substantially larger than modern leadless packages. Consequently, the component is associated with legacy industrial, communications, audio, and embedded-control equipment rather than compact mobile products. Its 60 MHz operating rate should also be evaluated against the clocking, latency, throughput, and memory requirements of the intended algorithm; the verified source data does not provide cycle-accurate performance figures. Potential uses include real-time signal analysis, communications signal processing, audio and speech processing, industrial control, and embedded DSP systems that specifically support the 305-contact package. These applications are relevant because the C80 combines floating-point arithmetic with a parallel DSP architecture. Actual suitability still depends on software compatibility, external memory requirements, peripheral availability, timing, and board-level thermal performance. The principal design consideration is package availability. The 305-contact CPGA footprint requires a compatible motherboard, socket or land pattern, careful escape routing, and adequate clearance for its 47.25 mm square body. Designers should preserve the manufacturer-defined pinout and follow the data sheet's power, ground, decoupling, and clock requirements rather than relying on generic modern-DSP layout assumptions. This product page consolidates the verified distributor identity, package information, same-family alternatives, and replacement constraints. It also separates confirmed specifications from engineering data that still requires confirmation in the manufacturer data sheet, helping procurement and design teams evaluate this legacy processor without presenting unverified electrical claims.

Cotação Contato
TMS320E15FZL - 16-Bit Digital Signal Processor | Texas Instruments
TMS320E15FZL

TMS320E15FZL - 16-Bit Digital Signal Processor | Texas Instruments

The Texas Instruments TMS320E15FZL is a 16-bit digital signal processor, or DSP, intended for embedded signal-processing systems and supplied in a surface-mount package. The verified product data identifies the device as a digital signal processor from Texas Instruments and specifically states its processor width as 16-bit. Additional operating details, including clock frequency, memory capacity, supply voltage, package dimensions, and environmental limits, were not present in the supplied records and must be confirmed from the manufacturer documentation before design release. A digital signal processor is a specialized microprocessor architecture optimized for filtering, transforms, waveform generation, control loops, and other operations involving dense sequences of numerical samples. Compared with a general-purpose microcontroller, a DSP typically combines deterministic execution, specialized arithmetic resources, and memory organization for sustained throughput. The TMS320E15FZL belongs to this broader embedded processing category, where predictable numerical processing can be valuable in audio, communications, industrial control, and instrumentation systems. The confirmed headline characteristics are its 16-bit digital signal processing architecture and Texas Instruments provenance. These identifiers place the component in the embedded processor market, but they do not by themselves establish instruction-set compatibility, cycle count, memory interface, or numerical throughput. Those details should not be inferred from the 16-bit label alone. Engineers should instead verify the exact processor architecture, clock limits, memory organization, bus signals, and software toolchain using the original manufacturer datasheet or archived technical documentation. TMS320E15FZL is particularly relevant when sustaining an older embedded DSP design, qualifying a board revision, or obtaining a documented source for an existing installation. The distributor records include DigiKey, Rochester Electronics, Ampheo, Microchip-Price, Capacitors-Online, IC-Components, Hotenda, LZchips, and Jotrin listings. One distributor result reports 5,505 units and a unit price of USD 23.08, while another listing describes current active production; those statements are marketplace observations as of 2026-10-23 rather than manufacturer lifecycle guarantees. Typical engineering uses should be selected only after confirming the complete electrical and software specification. Possible categories include audio signal conditioning, communications filtering, industrial feedback control, vibration analysis, and embedded waveform processing. In each case, the processor must be paired with suitable analog front ends, memory, clocking, reset circuitry, and a development toolchain. Because the supplied evidence does not identify supported peripherals or execution performance, no unsupported claims are made here. The primary procurement check is source and documentation quality. Confirm that the offered component is exactly TMS320E15FZL, that its package suffix FZL matches the original assembly, and that any marking or lot information is consistent with the authorized traceable supply. Validate operating voltage, pinout, memory, timing, and environmental requirements against the manufacturer datasheet before substitution, soldering, or firmware deployment. This page separates the few verified facts from unavailable technical fields and combines distributor availability observations, sourcing guidance, and design cautions. It adds procurement context without inventing clock, memory, pinout, or performance data that was not supplied by the verified search results.

Cotação Contato
TMS320F206PZA - 20MHz Static CMOS DSP | Texas Instruments
TMS320F206PZA

TMS320F206PZA - 20MHz Static CMOS DSP | Texas Instruments

The Texas Instruments TMS320F206PZA is a 20 MHz digital signal processor based on the TMS320C2xLP core and fabricated with static CMOS integrated-circuit technology. It is supplied in a 100-LQFP package measuring 14 mm by 14 mm. The device combines an advanced Harvard architecture, on-chip peripherals, on-chip memory, and a specialized instruction set for low-power digital signal processing. According to the manufacturer datasheet, its source code is compatible with TMS320C25 software upward through the TMS320C2x generation. A digital signal processor is a specialized microprocessor architecture optimized for arithmetic operations on continuously sampled signals. Unlike a general-purpose microcontroller, a DSP concentrates data-processing resources around multiply-accumulate workloads, predictable execution, and efficient data movement. The TMS320F206 belongs to the Texas Instruments TMS320 family of digital signal processors and controllers, combining signal-processing instructions with communication and control peripherals. Key documented features include static CMOS construction, membership in the TMS320C20x generation, a TMS320C2xLP CPU core, and a 20 MHz maximum clock frequency. Its advanced Harvard architecture supports specialized DSP instruction execution, while the integrated peripherals and memory reduce the need for external components in dedicated processing systems. The manufacturer describes the combination of Harvard architecture, on-chip resources, and a purpose-built instruction set as the foundation of the device's processing capability. The static CMOS implementation is intended for low-power operation, while the 20 MHz clock provides the timing basis for real-time filtering, signal transformation, and embedded control functions. Source-code compatibility with TMS320C25 software can simplify migration for applications already developed for that generation, subject to verification of peripheral differences, timing, memory organization, and board-level requirements. Typical uses for this DSP class include audio and communications signal processing, control loops, industrial measurement, and embedded signal-processing subsystems. The 100-LQFP package supports conventional surface-mount assembly and provides a large pin count suitable for external memory, parallel interfaces, and multiple peripheral connections. Exact RAM, ROM, peripheral, electrical, and timing limits must be taken from the manufacturer datasheet before final design release. The primary design consideration is that legacy DSP replacement is rarely determined by clock frequency alone. Board designers should compare pin assignments, memory interfaces, peripheral functions, voltage requirements, timing, software compatibility, and package geometry rather than treating a functionally similar processor as a drop-in replacement. The available web data does not establish a pin-to-pin-compatible substitute for this exact device. This page distinguishes documented identity and architecture from unverified replacement assumptions. It combines the exact distributor package information, manufacturer-datasheet findings, source-document links, application guidance, and an explicit explanation of why no alternative has been represented as a verified drop-in replacement.

Cotação Contato
TMS320F240PQS - 20MHz 16-Bit Flash DSP | Texas Instruments
TMS320F240PQS

TMS320F240PQS - 20MHz 16-Bit Flash DSP | Texas Instruments

The Texas Instruments TMS320F240PQS is a 16-bit fixed-point digital signal processor and digital signal controller with a 20 MHz clock, 32 KB of flash program memory, and a 132-pin BQFP package measuring 24.13 mm by 24.13 mm. It belongs to the TMS320C2xx generation of DSPs and is optimized for digital motor and motion-control applications. The verified distributor listing identifies the device as a C2xx, C2000-series, 24x-family controller with 16K x 16 words of on-chip flash. A digital signal processor is a specialized microprocessor architecture designed to execute mathematical and control algorithms efficiently. A DSP controller extends that processing capability with embedded memory, digital I/O, timers, analog interfaces, and control-oriented peripherals. The TMS320F240PQS sits in the hierarchy of digital signal controller, fixed-point DSP, microcontroller, embedded processor, and semiconductor. It is intended for systems requiring deterministic real-time control rather than general-purpose computing. The most prominent verified specifications are the 20 MHz operating frequency, 16-bit processor architecture, 32 KB of flash memory, 132-pin BQFP package, and 5 V operating supply identified in the component-comparison data. Its flash memory allows control firmware to be stored directly on the controller. The large 132-pin package exposes the device's extensive motor-control peripheral set, while its 20 MHz clock supports processing associated with the verified 20 MIPS performance figure. The TMS320F240 architecture uses the C2xLP core CPU for fixed-point signal and control processing. Its combination of flash program memory and dedicated real-time peripherals distinguishes it from earlier RAM-programmed DSP controllers. This makes the part relevant to closed-loop motor systems, where acquisition, filtering, transformation, modulation, and actuator calculations must occur within a predictable control interval. The verified family description specifically identifies digital motor and motion control as the optimization target. Typical uses include digital motor control, industrial automation, power-converter control, servo systems, and embedded signal-processing equipment. In such systems, the controller can execute control algorithms while its communication and timing peripherals coordinate external sensors, power stages, and protection functions. The 132-pin BQFP package is appropriate for through-hole industrial or legacy control boards where a large pin count simplifies access to numerous control and communications signals. Designers should verify the complete pinout, timing, peripheral configuration, and electrical limits against the manufacturer datasheet before laying out a new PCB. The verified data does not expose a complete machine-readable 132-pin assignment, so no pin names are inferred here. The 132-pin BQFP package also requires careful lead clearance, solder-joint inspection, and consideration of thermal performance when the controller is mounted alongside power-conversion circuitry. This product record combines verified distributor specifications, source links, package information, lifecycle context, and application-oriented engineering guidance. It distinguishes documented facts from missing data and avoids presenting unverified pin assignments, prices, compliance declarations, or substitute parts as established facts.

Cotação Contato
TMS320F241PG - 16-Bit 20MHz DSP with Flash | Texas Instruments
TMS320F241PG

TMS320F241PG - 16-Bit 20MHz DSP with Flash | Texas Instruments

The Texas Instruments TMS320F241PG is a 16-bit fixed-point digital signal processor with a 20 MHz C2xx CPU, 16 KB of on-chip flash memory, and a 64-pin QFP package measuring 14 mm by 20 mm. It combines fixed-point signal-processing performance with embedded flash memory in a surface-mount controller package designed for real-time control and DSP applications. A digital signal processor, or DSP, is a semiconductor optimized to execute mathematical operations on sampled data efficiently. A fixed-point DSP represents numerical values as integers and scaled fractional quantities, making it well suited to control loops, filtering, waveform generation, motor regulation, and industrial automation. The TMS320F241 belongs to the C2000 family of DSP controllers, which combines signal-processing capability with embedded control peripherals. The verified device description identifies a 16-bit architecture operating at 20 MHz, with 16 KB of flash organized as 8K by 16 words. Its 64-QFP package supports compact surface-mount assembly while providing a larger pin count than the QFP packages commonly used for small microcontrollers. The exact instruction-cycle time is stated in the retrieved technical material as 50 ns, which is consistent with a 20 MHz operating rate. The C2xx CPU core provides the computational foundation for digital filtering, control calculations, and fixed-point algorithms. Because the device includes embedded flash, a complete application can store its program code on the DSP itself rather than depending on an external program-memory device. This integration can simplify hardware and firmware organization in dedicated control equipment, although memory-intensive, multi-stage signal-processing designs must still evaluate the available 16 KB capacity carefully. Typical applications include digital motor control, industrial power conversion, servo and position control, embedded instrumentation, and real-time signal conditioning. Its 20 MHz rate and fixed-point architecture are especially useful in control loops where deterministic arithmetic and compact embedded code are more important than floating-point performance or a large general-purpose software ecosystem. Designers should review the manufacturer datasheet for the exact pin assignments, peripheral allocation, electrical limits, timing requirements, and external interface configuration. PCB layout should provide suitable decoupling at the supply pins and preserve clean signal routing, particularly when the DSP drives converters, sensors, or communication interfaces. Legacy software and peripheral differences must also be evaluated before migration to a newer C2000 device. This page combines the verified distributor and manufacturer references with practical guidance for controller selection, replacement assessment, PCB reuse, and real-time DSP implementation. It distinguishes confirmed specifications from data that still requires confirmation, helping engineers make sourcing and design decisions without relying on unverified parametric claims.

Cotação Contato
TMS320F2800152-Q1 - 100MHz C2000 MCU, 64KB Flash | TI
TMS320F2800152-Q1

TMS320F2800152-Q1 - 100MHz C2000 MCU, 64KB Flash | TI

The Texas Instruments TMS320F2800152-Q1 is an automotive-qualified C2000 real-time microcontroller featuring a 32-bit TMS320C28x core running at 100 MHz, 64 KB (32K x 16) of on-chip flash memory, integrated CAN-FD, and lockstep functional-safety capability rated ASIL B. It is offered in a 32-pin VQFN (5x5 mm) package (ordering part F2800152QRHBRQ1). A real-time microcontroller (MCU) is a single-chip embedded processor that executes control loops with deterministic, ultra-low latency. Within the power-management hierarchy, the C2000 family sits above generic MCUs by pairing a DSP-class C28x core with dedicated control peripherals such as high-resolution PWM, fast ADCs, and comparators, making it the de facto standard for digital power conversion and motor control. Key features include the cost-optimized F280015x architecture designed for power electronics, CAN-FD for automotive networking, lockstep core operation supporting ASIL B safety integrity levels, and AEC-Q100 automotive qualification (Q1). The 64 KB flash suits compact control firmware, while the C28x pipeline delivers deterministic interrupt latency essential for current-loop control at switching frequencies of 100 kHz and above. The device integrates the characteristic C2000 control-law accelerator ecosystem: ePWM modules, on-chip analog comparators, and serial communication peripherals. Combined with TI's C2000Ware and MotorControl SDK, engineers can deploy field-oriented motor control, LLC/PFC digital power supplies, and solar inverter control with minimal external components. Typical applications include automotive onboard chargers and DC-DC converters, traction-inverter auxiliary supplies, industrial servo drives, and high-density AC-DC power supplies where ASIL-rated safety and CAN-FD connectivity are required. Design consideration: budget the 64 KB flash carefully - C2000 math libraries and FOC stacks can exceed this footprint, so verify code size against the larger F280015x flash variants if your algorithm set grows.

Cotação Contato
TMS320F2800153-Q1 - 120MHz C2000 MCU, ASIL-B | TI
TMS320F2800153-Q1

TMS320F2800153-Q1 - 120MHz C2000 MCU, ASIL-B | TI

The Texas Instruments TMS320F2800153-Q1 is an automotive-qualified C2000 real-time 32-bit microcontroller running at 120 MHz with 64 KB (32K x 16) of on-chip flash, HRPWM, CAN-FD, and lockstep CPU safety architecture rated ASIL B, housed in a 48-pin HTQFP (7x7 mm) package. It belongs to the cost-optimized F280015x family of ultra-low latency real-time MCUs designed for power electronics control. A real-time MCU is a class of 32-bit microcontroller that executes control-loop code deterministically with microsecond-scale interrupt latency. Within the power-management semiconductor hierarchy, it sits above analog controllers and below application processors, dedicated to closing high-frequency control loops such as digital power conversion and motor commutation. Key features include the C28x DSP core at 120 MHz, 64 KB flash with ECC, high-resolution PWM (HRPWM) for fine duty-cycle control in LLC and phase-shifted converters, CAN-FD for in-vehicle networking, and a lockstep CPU core with integrated safety mechanisms meeting ASIL B requirements of ISO 26262. The family is scalable: F2800152 through F2800157 share the same die, package, and pinout, differing mainly in flash memory size. Architecturally, the device combines the fixed-point C28x CPU with dedicated trigonometric math unit (TMU), CLA-style acceleration options, 12-bit ADCs, and ePWM modules that enable single-chip closure of current, voltage, and speed loops in digital power supplies, on-board chargers, and traction inverters. Typical applications include automotive on-board chargers (OBC), DC-DC converters, HEV/EV traction motor control, solar micro-inverters, and servo drives, where deterministic 100 kHz+ control loops and functional safety are mandatory. The CAN-FD interface connects directly to vehicle body and powertrain networks. Design tip: budget flash headroom of at least 20% above initial firmware size, or select the pin-compatible F2800154/155/156/157 variants with larger flash so an PCB respin is never needed. Prices as of 2026-08-28; see FAQ for current tier pricing.

Cotação Contato
TMS320F2800154-Q1 - 100MHz C2000 MCU | Texas Instruments
TMS320F2800154-Q1

TMS320F2800154-Q1 - 100MHz C2000 MCU | Texas Instruments

The TMS320F2800154-Q1 is an automotive-grade C2000 real-time microcontroller from Texas Instruments, combining a 100-MHz C28x DSP core with 128 KB of embedded flash memory. It features CAN-FD for high-speed communication and lockstep architecture for ASIL B functional safety, making it suitable for safety-critical power electronics and motor control systems. The device is offered in the VQFN-40 (RHB) package with an exposed pad for thermal performance. A microcontroller (MCU) is a compact integrated circuit that contains a processor core, memory, and programmable peripherals. The C2000 family specifically targets real-time control applications, merging digital signal processing with MCU peripherals like PWM and ADC. This hierarchy places the C2000 in the broader category of embedded processors, bridging MCU and DSP design. Key features include a 128 KB flash for application code, a 100 MHz C28x core capable of controlling power conversion loops, and CAN-FD for automotive networking. The lockstep safety mechanism detects faults, enabling ASIL B compliance. AEC-Q100 qualification ensures operation in harsh vehicle environments. The F2800154-Q1 is ideal for applications requiring deterministic, low-latency control. Its high-resolution PWM and analog front-end support precise current and voltage regulation in converters. The device supports multiple communication interfaces, and the VQFN-40 package offers a compact footprint. Typical use cases include automotive motor drives, digital power supplies, battery management, and on-board chargers. The MCU's dual-role as a DSP and MCU simplifies designs by handling both math-intensive control and system management. When designing with this MCU, use proper decoupling and thermal via placement to ensure stability. The CAN-FD bus requires correct termination to maintain signal integrity.

Cotação Contato
TMS320F2800155-Q1 - 120MHz C2000 Automotive MCU | Texas Instruments
TMS320F2800155-Q1

TMS320F2800155-Q1 - 120MHz C2000 Automotive MCU | Texas Instruments

The Texas Instruments TMS320F2800155-Q1 is an automotive C2000™ 32-bit real-time microcontroller built on the C28x core, running at 120 MHz with 128 KB of embedded flash memory. It comes in a 48-pin HTQFP (7x7) package and is designed for motor control, power conversion, and automotive safety applications. The device integrates high-resolution PWM (HRPWM) and CAN-FD interfaces, and features lockstep ASIL B capability for functional safety. A C2000 microcontroller is a family of 32-bit real-time MCUs optimized for control-loop processing. It sits between digital signal processors and general-purpose MCUs, offering the deterministic performance needed for closed-loop control in power electronics and motor drives. The TMS320F2800155-Q1 belongs to the C2000 real-time control platform, which is widely accepted in industrial drives, electric vehicles, and renewable energy systems. Key features include the 120 MHz C28x core with a floating-point unit, 128 KB flash, HRPWM for high-resolution pulse generation, CAN-FD for robust communication, and lockstep ASIL B safety. The 48-pin HTQFP package provides a compact solution while maintaining thermal performance. The device also supports multiple serial interfaces, including UART, SPI, I2C, and CAN-FD, enabling flexible system integration. The C28x core is a Harvard-architecture processor with a unified memory map. Its floating-point unit accelerates complex control algorithms. The HRPWM module supports high-resolution duty cycles up to 150 ps, enabling precise control in power converters. CAN-FD supports higher data rates and larger payloads for automotive networks. The lockstep ASIL B feature enhances system safety by detecting faults in the CPU, making it suitable for ISO 26262 applications. Typical applications include traction motor control in electric vehicles, on-board chargers, power factor correction, industrial servo drives, battery management systems, and solar inverters. The combination of HRPWM and CAN-FD makes it suitable for real-time control with communication. Its wide operating temperature range ensures reliability in harsh automotive environments. When designing, decouple the supply pins with ceramic capacitors and use a dedicated ground plane. The HRPWM outputs should be routed away from sensitive analog signals to minimize noise coupling. It is also important to provide proper thermal management through the exposed pad and vias, especially at high ambient temperatures.

Cotação Contato
TMS320F2800156-Q1 - 100MHz C2000 Automotive MCU | TI
TMS320F2800156-Q1

TMS320F2800156-Q1 - 100MHz C2000 Automotive MCU | TI

The TMS320F2800156-Q1 is an automotive-grade 32-bit microcontroller from Texas Instruments' C2000 real-time control platform. It features a 100 MHz CPU, 256 KB of flash memory, and supports CAN-FD, lockstep ASIL B functional safety, and AEC-Q100 grade 0 or 1 operation. It is designed for cost-optimized, ultra-low latency control in power electronics. What is a C2000 real-time microcontroller? A C2000 MCU is a specialized 32-bit DSP-based microcontroller optimized for real-time control algorithms such as motor control, digital power conversion, and inverter control. It combines a high-performance CPU with dedicated PWM, ADC, and comparator peripherals to achieve low interrupt latency and deterministic behavior. C2000 devices are widely used in automotive and industrial applications where real-time performance is critical. Key features include 100-MHz operation, 256-KB flash, CAN-FD connectivity, lockstep ASIL B safety, and grade 0 and 1 temperature operation. The device also includes an enhanced control interrupt structure and a wide range of digital and analog peripherals for closed-loop control. Technically, the C2000 architecture uses a 32-bit fixed-point CPU with hardware multiply-accumulate, enabling efficient execution of control algorithms. The device includes a comparator subsystem for trip handling, a 12-bit ADC, and multiple PWM channels. The lockstep CPU ensures safety-critical functions meet ASIL B requirements. Typical applications include motor control, on-board chargers, DC-DC converters, traction inverters, and other automotive power electronics. The 100-MHz performance and CAN-FD interface make it suitable for high-speed closed-loop control in noisy automotive environments. When designing, ensure proper decoupling of the VDD and VCCA pins with 0.1 uF and 10 uF capacitors, and use a thermal via-in-pad to improve heat dissipation in high-temperature automotive applications.

Cotação Contato
TMS320F2800157-Q1 - Automotive C2000 MCU 120-MHz 256-KB Flash | TI
TMS320F2800157-Q1

TMS320F2800157-Q1 - Automotive C2000 MCU 120-MHz 256-KB Flash | TI

The TMS320F2800157-Q1 is an automotive-grade C2000™ 32-bit real-time microcontroller from Texas Instruments, operating at 120 MHz with 256 KB of embedded flash memory in a 100-pin LQFP package. It integrates a C28x CPU core with a Control Law Accelerator (CLA) for concurrent control-loop execution, plus high-resolution PWM (HRPWM) and CAN-FD for advanced motor control and digital power conversion applications. A C2000 real-time microcontroller is a specialized MCU family from TI designed for closed-loop control applications such as motor drives, power converters, and industrial automation. These devices combine a high-performance CPU with dedicated control peripherals (PWMs, ADCs, comparators) to execute control algorithms with deterministic timing. Key features include 120 MHz C28x CPU, 256 KB flash, 256 KB RAM, 4 high-resolution PWM channels, 12-bit ADC with 3.46 MSPS, CAN-FD interface, and lockstep ASIL B functional safety capability for automotive Grade 0 and Grade 1 operation. The device supports up to 2MB of external memory via XINTF. Architecture: The C28x core uses a modified Harvard architecture with unified memory map, executing up to 6 instructions per cycle. The CLA co-processor offloads math-intensive control loops. The HRPWM block provides 150 ps resolution, enabling precise power-stage control in interleaved converters. Typical applications include automotive traction inverter control, DC-DC converters, on-board chargers (OBC), and integrated starter-generators. The CAN-FD interface supports vehicle network integration, while the functional safety features enable ASIL B certification in safety-critical systems. Design consideration: For CAN-FD connectivity, use appropriate isolation - the ISO6442-Q1 digital isolator (available on XAIPART) pairs well. Ensure decoupling capacitors (0.1 uF and 10 uF) on all VDD pins for reliable 120-MHz operation.

Cotação Contato