Circuitos Integrados

USB2513B-AEZC

USB2513B-AEZC - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip (Tape & Reel)

The Microchip USB2513B-AEZC is a 3-port USB 2.0 Hi-Speed hub controller IC in a 36-pin QFN (6x6 mm) package with exposed pad, engineered for embedded USB port expansion in cost- and power-sensitive designs. It integrates a Hi-Speed upstream port and three downstream ports, supports USB 2.0 Link Power Management, and operates from a single 3.3 V supply. MultiTRAK technology delivers one transaction translator per downstream port, improving throughput in mixed-speed environments versus single-TT hubs. A USB hub controller is a USB Interface IC that aggregates one upstream USB connection into multiple downstream ports, allowing many devices to share a single host root port. Within the broader taxonomy, a USB hub belongs to USB Interface ICs, which sit under Interface ICs and ultimately under Integrated Circuits. The USB2513B-AEZC implements the hub repeater and transaction-translator functions defined by the USB 2.0 specification, while adding vendor-specific features such as per-port battery-charging detection and configurable port mapping. This makes it the lowest-level "smart" intermediary between a USB host and peripherals. Key features include a 36-pin QFN-EP package with low thermal resistance, an SMBus/I2C management interface for configuration and GPIO control, integrated upstream and downstream termination resistors, and per-port enable and over-current sense inputs. The device supports self- and bus-powered operation, individual port switching, and optional FlexConnect technology for role reversal between upstream and downstream ports. Technically, the USB2513B uses MultiTRAK, which assigns a dedicated transaction translator to each downstream port. This avoids the head-of-line blocking seen in single-TT hubs when a full-speed device is connected alongside Hi-Speed traffic, sustaining throughput on all three ports simultaneously. Internal charge-pump regulation supplies the high-side drive for the downstream D+/D- lines without external 5 V short-circuit protection FETs when paired correctly. Typical applications include USB port expansion in set-top boxes, docking stations, automotive head units, monitors with USB hubs, and industrial HMI panels. Designers select this part when three downstream ports, low standby current, and a small QFN footprint are simultaneously required. When designing with this hub, the exposed pad must be soldered to a continuous ground plane for thermal dissipation and signal return. Place the 3.3 V decoupling capacitors within 2 mm of the respective supply pins and observe the 90-ohm differential impedance requirement for USB DP/DM traces. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone, helping procurement and embedded design teams shorten the bill-of-material selection cycle.

Cotação Contato

USB2513B-AEZC-TR

USB2513B-AEZC-TR - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip

The Microchip USB2513B-AEZC-TR is a 3-port USB 2.0 Hi-Speed hub controller IC in a 36-pin QFN (6x6 mm) package with exposed pad, engineered for embedded USB port expansion in cost- and power-sensitive designs. It integrates a Hi-Speed upstream port and three downstream ports, supports USB 2.0 Link Power Management, and operates from a single 3.3 V supply. MultiTRAK technology delivers one transaction translator per downstream port, improving throughput in mixed-speed environments versus single-TT hubs. A USB hub controller is a USB Interface IC that aggregates one upstream USB connection into multiple downstream ports, allowing many devices to share a single host root port. Within the broader taxonomy, a USB hub belongs to USB Interface ICs, which sit under Interface ICs and ultimately under Integrated Circuits. The USB2513B-AEZC-TR implements the hub repeater and transaction-translator functions defined by the USB 2.0 specification, while adding vendor-specific features such as per-port battery-charging detection and configurable port mapping. This makes it the lowest-level "smart" intermediary between a USB host and peripherals. Key features include a 36-pin QFN-EP package with low thermal resistance, an SMBus/I2C management interface for configuration and GPIO control, integrated upstream and downstream termination resistors, and per-port enable and over-current sense inputs. The device supports self- and bus-powered operation, individual port switching, and optional FlexConnect technology for role reversal between upstream and downstream ports. Technically, the USB2513B uses MultiTRAK, which assigns a dedicated transaction translator to each downstream port. This avoids the head-of-line blocking seen in single-TT hubs when a full-speed device is connected alongside Hi-Speed traffic, sustaining throughput on all three ports simultaneously. Internal charge-pump regulation supplies the high-side drive for the downstream D+/D- lines without external 5 V short-circuit protection FETs when paired correctly. Typical applications include USB port expansion in set-top boxes, docking stations, automotive head units, monitors with USB hubs, and industrial HMI panels. Designers select this part when three downstream ports, low standby current, and a small QFN footprint are simultaneously required. When designing with this hub, the exposed pad must be soldered to a continuous ground plane for thermal dissipation and signal return. Place the 3.3 V decoupling capacitors within 2 mm of the respective supply pins and observe the 90-ohm differential impedance requirement for USB DP/DM traces. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone, helping procurement and embedded design teams shorten the bill-of-material selection cycle.

Cotação Contato

USB2513B-I/M2

USB2513B-I/M2 - 3-Port USB 2.0 Hub | Microchip

Microchip Technology USB2513B-I/M2 is a 3-port USB 2.0 high-speed hub controller in a 36-SQFN 6x6 mm package. It provides a compact way to expand one upstream USB connection into three downstream ports for consumer and mobile equipment. The verified product information identifies the device as an active USB hub controller with USB Interface technology, while Microchip describes the USB2513B family as a versatile, cost-effective, and power-efficient solution for embedded USB expansion. A USB hub controller is an interface IC that manages traffic between an upstream host and multiple downstream peripherals. Within the product hierarchy, the USB2513B-I/M2 is a USB interface controller, then a USB hub controller, then a USB 2.0 high-speed device, and finally a semiconductor. This positioning distinguishes it from endpoint controllers, transceivers, and host-interface devices: the controller coordinates enumeration, port connectivity, and shared access to the upstream USB link. The principal verified specifications are three downstream ports, USB 2.0 high-speed operation, and a 36-SQFN package measuring 6x6 mm. Microchip positions the family for consumer and mobile applications where external connectivity must be added without relying on a host controller or discrete USB switch. Related USB251xB family information also identifies individual or ganged downstream-port power control, integrated USB termination, integrated pull-up and pull-down resistors, and USB-IF Compliance by Similarity support. The USB2513B family uses MultiTRAK technology to improve data throughput in mixed-speed USB environments. The verified distributor records classify USB2513B-I/M2 as an interface controller and USB hub controller rather than a general-purpose processor. Its internal hub function therefore concentrates USB connectivity in one IC while leaving the attached system processor responsible for the application above USB. Exact electrical ratings, internal oscillator details, and current-consumption limits were not included in the supplied verified records and must be confirmed in the manufacturer datasheet before design release. Typical uses include mobile-device accessories, consumer peripherals, embedded systems, and compact USB expansion equipment. A system requiring three downstream USB 2.0 ports can place the controller between its USB host and the external connectors, subject to the PCB, power-management, signal-integrity, and compliance requirements in the manufacturer documentation. The small 6x6 mm package also supports space-constrained products, although exposed-pad layout and thermal design still require careful review. Design should start with the exact package drawing and reference circuit from the USB2513B documentation. Maintain the required USB routing geometry, provide compliant power distribution, connect the crystal or clock components as specified, and verify downstream-port current limits before external power budgeting. Because the supplied search results contain only a one-source price rather than a complete quantity schedule, the listed tiers retain the verified LCSC starting price and should not be treated as guaranteed volume quotations. This product record combines the manufacturer family description, distributor inventory evidence, package data, pricing, lifecycle indication, and same-family cross-reference findings. It also distinguishes verified parameters from unavailable technical details and highlights the practical PCB, power, compliance, and sourcing considerations that are not captured by a distributor listing alone.

Cotação Contato

USB2513B/M2

USB2513B/M2 - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip

The Microchip Technology USB2513B/M2 is a 3-port, low-power, USB 2.0 Hi-Speed hub controller with integrated MultiTRAK™ multi-transaction translators, housed in a 36-pin SQFN (6x6 mm) package. It supports Low-Speed, Full-Speed, and Hi-Speed downstream devices on a single upstream port, and operates from a single 3.3 V supply with an internal regulator. A USB hub controller is a peripheral device that expands a single USB root port into multiple downstream ports, allowing several USB devices to share one upstream connection. USB hubs sit in the USB 2.0 protocol layer between the host controller and end devices, handling transaction translation, port power switching, and overcurrent protection. The USB2513B is part of the Microchip USB251xB/xBi family and is widely used in embedded and mobile designs where compact footprint and low BOM cost are critical. Key features of the USB2513B/M2 include support for USB 2.0 Hi-Speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) operation, individual or ganged downstream port power switching with overcurrent protection, Battery Charging 1.1 (BC1.1) protocol support on downstream ports, programmable signal drive strength, internal 3.3 V regulator, integrated USB termination and pull-up/pull-down resistors, and on-chip ESD protection. The integrated MultiTRAK™ architecture delivers industry-leading throughput in mixed-speed USB environments by dedicating a transaction translator per downstream port. The USB2513B/M2 is configured via SMBus or an external EEPROM, allowing OEMs to customize VID, PID, port disable map, and power-switch behavior without external logic. The 36-pin SQFN package provides a small PCB footprint suitable for space-constrained mobile and consumer products. The part is qualified for industrial temperature operation and is fully footprint-compatible with older USB251x/xA family members for direct drop-in upgrades. Typical applications include USB port expansion in laptops, tablets, and docking stations, multi-port USB charging hubs, industrial PCs, embedded HMI panels, and consumer electronics such as monitors, set-top boxes, and game consoles. BC1.1 support makes it particularly attractive for dedicated charging-only ports without host interaction. When designing with this device, place the 12 MHz crystal or clock source within 5 mm of the XTAL1/XTAL2 pins, and follow USB 2.0 high-speed layout guidelines including a 90-ohm differential impedance on DP/DM pairs. Decouple VBUS with a 4.7 uF ceramic capacitor and add ferrites upstream of each downstream port to pass USB-IF compliance testing. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical layout notes beyond the manufacturer datasheet to accelerate USB2513B/M2 design-in decisions.

Cotação Contato

USB2513BT/M2

USB2513BT/M2 - USB 2.0 3-Port Hub | Microchip

Microchip Technology USB2513BT/M2 is a three-port USB 2.0 hi-speed hub controller operating at 3.3 V in a 36-pin SQFN package with an exposed pad. The controller supports Low-Speed, Full-Speed, and High-Speed USB devices and is packaged for tape-and-reel production. Its primary role is to expand one USB host connection into three downstream ports while maintaining USB 2.0 hub functionality and mixed-speed device support. A USB hub controller is an interface IC within the broader semiconductor hierarchy of USB interface controllers, interface ICs, and connectivity semiconductors. It coordinates traffic between a single upstream USB port and multiple downstream ports, handles device attachment and speed detection, and provides the electrical signaling required for USB connections. The USB2513B family is positioned for cost-sensitive consumer, mobile, and embedded systems requiring more than one USB peripheral connection. The verified product information identifies USB 2.0 Hi-Speed operation, three downstream ports, a 3.3 V operating supply, a 36-pin 6 mm by 6 mm SQFN package with exposed pad, and tape-and-reel packaging. Microchip describes the USB2513B as a versatile, cost-effective, and power-efficient hub controller suited to consumer and mobile applications. The available distributor listings also identify individual or ganged downstream-port power control, integrated USB termination, integrated pull-up and pull-down resistors, and full power management as family-level capabilities. The device uses Microchip MultiTRAK technology, which is designed to provide reliable data throughput in mixed-speed USB environments. Mixed-speed support matters because USB 2.0 hubs can connect peripherals operating at 12 Mbit/s Low-Speed, 1.5 Mbit/s Full-Speed, or 480 Mbit/s High-Speed. Integrated termination and bias resistors can reduce the number of external discrete components, while configurable port-power behavior helps system designers manage downstream-current requirements. Typical uses include consumer peripherals, mobile docking equipment, embedded systems, and compact USB port expanders. A system requiring three USB 2.0 ports can place the controller downstream of a host controller and connect keyboards, mice, storage, or other compatible peripherals. Automotive, industrial, medical, and communications equipment may also use USB for service, configuration, data-transfer, or peripheral connectivity where USB 2.0 compatibility is sufficient. The exposed-pad package requires careful PCB layout to transfer heat away from the device. The recommended design should follow the manufacturer's land pattern and recommended circuitry, provide adequate input and output decoupling, keep high-speed USB traces short and impedance-controlled, and plan a continuous ground reference. USB connector current requirements, downstream-power budgets, and any inrush behavior should be checked against the complete system power-supply design. This product page consolidates verified manufacturer and distributor information, current sourcing data, package details, and drop-in replacement evidence that is not presented as one unified datasheet summary. It also distinguishes confirmed USB2513B-family drop-ins from broader functional alternatives so engineers can focus first on parts with the strongest evidence of package and terminal compatibility.

Cotação Contato

USB2514-AEZG

USB2514-AEZG - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514-AEZG is a USB 2.0 high-speed four-port hub controller with a 3.3 V operating voltage, MultiTRAK transaction-translator technology, and a 36-pin QFN exposed-pad package measuring 6 x 6 mm. It is designed to add four downstream USB connections to an embedded USB host or device while supporting mixed-speed USB 2.0 environments. The controller provides configurable port mapping, port swapping, and PHYBoost features according to the published comparison data. A USB hub controller is an interface IC that manages traffic between one upstream USB port and multiple downstream ports. Within the product hierarchy, a USB hub controller is a USB interface controller, interface IC, and semiconductor. Unlike a simple passive USB hub, this configurable controller actively coordinates transactions, helps devices share an upstream link, and can be adapted to different product architectures through firmware and hardware configuration. The USB2514-AEZG uses MultiTRAK technology to support data throughput in mixed-speed USB systems. Its four downstream ports make it appropriate for embedded hubs, docking stations, printers, industrial equipment, and compact peripheral systems. The 3.3 V operating requirement supports integration into conventional 3.3 V embedded designs, while the 36-QFN exposed-pad package supports compact, high-density PCB layouts. Configurable functions listed for this device family include PortMap, PortSwap, and PHYBoost. PortMap changes how logical ports relate to physical USB connectors, PortSwap reverses the logical order of downstream ports, and PHYBoost adjusts USB transceiver drive strength. These features can simplify product configuration, improve connector usability, or help address signal-integrity requirements without changing the external hub architecture. The USB2514-AEZG is positioned for OEM and industrial embedded USB solutions where four downstream ports are required. Typical implementations include USB connection panels, embedded host adapters, test equipment, and peripheral systems that expose several USB Type-A connectors. Firmware, descriptor configuration, power planning, and connector data-path validation remain important parts of a successful implementation. For PCB design, place the exposed pad and decoupling network according to the manufacturer datasheet, provide adequate VBUS power for all attached downstream loads, and route USB differential pairs as controlled-impedance traces. Signal-quality testing should cover simultaneous high-speed traffic, hot-plug behavior, and transitions between full-speed and low-speed devices. This product summary combines verified distributor and manufacturer information with same-package replacement guidance and practical integration considerations. It is intended to help engineers evaluate USB2514-AEZG for embedded four-port USB hub designs without assuming unverified electrical, pricing, or lifecycle details.

Cotação Contato

USB2514-AEZG-TR

USB2514-AEZG-TR - 4-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)

The Microchip Technology USB2514-AEZG-TR is a USB 2.0 high-speed four-port hub controller with a 3.3 V operating voltage, MultiTRAK transaction-translator technology, and a 36-pin QFN exposed-pad package measuring 6 x 6 mm. It is designed to add four downstream USB connections to an embedded USB host or device while supporting mixed-speed USB 2.0 environments. The controller provides configurable port mapping, port swapping, and PHYBoost features according to the published comparison data. A USB hub controller is an interface IC that manages traffic between one upstream USB port and multiple downstream ports. Within the product hierarchy, a USB hub controller is a USB interface controller, interface IC, and semiconductor. Unlike a simple passive USB hub, this configurable controller actively coordinates transactions, helps devices share an upstream link, and can be adapted to different product architectures through firmware and hardware configuration. The USB2514-AEZG-TR uses MultiTRAK technology to support data throughput in mixed-speed USB systems. Its four downstream ports make it appropriate for embedded hubs, docking stations, printers, industrial equipment, and compact peripheral systems. The 3.3 V operating requirement supports integration into conventional 3.3 V embedded designs, while the 36-QFN exposed-pad package supports compact, high-density PCB layouts. Configurable functions listed for this device family include PortMap, PortSwap, and PHYBoost. PortMap changes how logical ports relate to physical USB connectors, PortSwap reverses the logical order of downstream ports, and PHYBoost adjusts USB transceiver drive strength. These features can simplify product configuration, improve connector usability, or help address signal-integrity requirements without changing the external hub architecture. The USB2514-AEZG-TR is positioned for OEM and industrial embedded USB solutions where four downstream ports are required. Typical implementations include USB connection panels, embedded host adapters, test equipment, and peripheral systems that expose several USB Type-A connectors. Firmware, descriptor configuration, power planning, and connector data-path validation remain important parts of a successful implementation. For PCB design, place the exposed pad and decoupling network according to the manufacturer datasheet, provide adequate VBUS power for all attached downstream loads, and route USB differential pairs as controlled-impedance traces. Signal-quality testing should cover simultaneous high-speed traffic, hot-plug behavior, and transitions between full-speed and low-speed devices. This product summary combines verified distributor and manufacturer information with same-package replacement guidance and practical integration considerations. It is intended to help engineers evaluate USB2514-AEZG-TR for embedded four-port USB hub designs without assuming unverified electrical, pricing, or lifecycle details.

Cotação Contato

USB2514-HZH

USB2514-HZH USB 2.0 Four-Port Hub Controller | Microchip

The Microchip Technology USB2514-HZH is a USB 2.0 high-speed four-port hub controller with four downstream ports, supplied in a 48-pin QFN package with exposed pad. The verified product information identifies it as an OEM-configurable, low-power hub controller using MTT technology and designed for embedded USB solutions. Its four downstream ports allow one upstream USB connection to fan out to multiple peripherals, while USB 2.0 compliance supports high-speed and mixed-speed USB environments. A USB hub controller is an interface integrated circuit that manages traffic between an upstream host or root hub and multiple downstream USB devices. It belongs to the broader hierarchy of USB interface ICs, USB connectivity controllers, embedded interface semiconductors, and interface ICs. The USB2514-HZH is intended for OEM designs where hub behavior, port configuration, firmware support, and system integration determine whether the controller is suitable for a product. The verified data specifically describes the USB2514-HZH as a USB 2.0 high-speed four-port hub controller with four downstream ports. It is also described as low power and OEM configurable. The MTT architecture provides the product context for mixed-speed USB operation, while the USB 2.0 specification provides the compatibility framework for connected devices. These features make the device relevant to embedded USB hubs, docking stations, industrial peripherals, and other systems requiring multiport USB expansion. The package information is reported as a 48-pin QFN exposed-pad package, with one distributor result identifying the package as 48-VFQFN and another as QFN-48-EP. The exposed pad is relevant to PCB layout and thermal management, but the supplied data does not provide a verified pin-by-pin diagram or pin names. Therefore, engineers should obtain the current Microchip datasheet before assigning signals or designing a footprint. Typical design work involves connecting the upstream USB interface, four downstream USB ports, required support components, and the appropriate power architecture. USB signal routing requires careful impedance-controlled layout, short differential traces, controlled return paths, and separation from noisy power and switching nodes. Hub designs must also account for enumeration, current budget, downstream port power management, firmware support, and product-specific descriptors. This page consolidates verified distributor listings, the Microchip product-page reference, package observations, and application guidance. It does not invent electrical limits, pricing tiers, pin assignments, or lifecycle claims that were not present in the supplied web data. For purchasing, use the listed distributor links and confirm current stock, price, and date with the supplier before placing an order.

Cotação Contato

USB2514B-AEZC

USB2514B-AEZC - 4-Port USB 2.0 Hi-Speed Hub Controller | Microchip

The Microchip Technology USB2514B-AEZC is a 4-port USB 2.0 Hi-Speed hub controller housed in a 36-pin QFN (6x6 mm) package with exposed pad. It operates from a 3.0V to 3.6V single supply, supports Low/Full/Hi-Speed USB signaling (480 Mbps), and integrates Microchip's MultiTRAK™ technology for industry-leading throughput in mixed-speed USB environments. The device provides four downstream ports with per-port battery-charging detection and is well suited for consumer, mobile, and embedded computing platforms. What is a USB hub controller? A USB hub controller is an interface IC that expands a single upstream USB port into multiple downstream ports, handling the USB protocol, transaction translation, and port power management. It belongs to the broader family of interface ICs (USB controllers → interface ICs → digital ICs → semiconductors) and sits between the host controller and end devices, isolating traffic per port and enumerating attached peripherals. Key features include USB 2.0 Hi-Speed compliance, integrated 1.5 kΩ upstream pull-up, automatic Hi-Speed termination, port-status indicators, ganged or individual port power switching, and optional battery charging support on downstream VBUS. The internal architecture pairs a serial interface engine (SIE), hub repeater, and transaction translator, allowing full- and low-speed devices to operate behind a Hi-Speed hub without throughput penalty. The USB2514B-AEZC also exposes I2C/SMBus configuration, GPIO for LED indicators, and PRTPWR power-control outputs per port. Its compact 36-QFN footprint and low standby current make it a common choice for space-constrained designs such as docking stations, monitors, automotive head units, and embedded motherboards. Typical applications include USB port expansion on docking stations, automotive infotainment hubs, monitors with built-in USB, all-in-one PCs, set-top boxes, and embedded industrial PCs. The 4-port density matches the most common desktop-peripheral expansion scenarios without external port-multiplier silicon. When designing with this part, observe the datasheet's recommended decoupling (1 µF + 0.1 µF near VBAT and VDD33) and provide a stable 3.3V rail. The exposed thermal pad must be soldered to a grounded copper pour to meet the QFN-36 thermal performance spec. PRTPWR drive strength is limited; pair with an external power switch (such as Microchip's MIC2026) for VBUS control. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

USB2514B/M2

USB2514B/M2 - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514B/M2 is a 4-port USB 2.0 Hi-Speed hub controller packaged in a 36-SQFN measuring 6 x 6 mm. It is designed to expand one upstream USB connection into four downstream USB ports for embedded consumer, mobile, and compact peripheral systems. The verified product information identifies the device as a low-power, cost-effective controller using Microchip MultiTRAK technology for mixed-speed USB traffic. A USB hub controller is an interface IC that manages transactions between a USB host, an upstream port, and multiple downstream ports. It belongs to the USB interface-controller hierarchy, combines interface logic and USB connectivity, and is used to add device connectivity without requiring four independent host controllers. USB 2.0 Hi-Speed denotes the 480 Mb/s operating mode, while the four-port configuration consolidates peripheral expansion into a single embedded device. The verified data specifically confirms four USB 2.0 Hi-Speed downstream ports, low-power operation, mixed-speed support through MultiTRAK technology, and suitability for consumer and mobile applications. The controller can reduce external USB switch complexity by integrating hub-management functions into one package. The 36-SQFN footprint also supports compact PCB layouts, although exposed-pad thermal management and careful high-speed routing remain essential. In a typical design, the USB2514B/M2 connects between a USB host and four downstream connectors. Each downstream branch requires appropriate USB data routing and power-path design, while the hub itself needs a suitable reference, clock, decoupling, and configuration implementation defined by the manufacturer datasheet. Because the provided data does not state operating voltage, current, clock frequency, or pin names, those values must be confirmed before schematic sign-off. The USB2514B/M2 is appropriate for docking accessories, compact embedded hubs, mobile accessories, printers, storage peripherals, and consumer equipment where four USB ports are required. Compared with the USB2513B-AEZC family member, its defining advantage is the verified four-port configuration rather than three ports; board compatibility should not be assumed solely from that functional similarity. For implementation, preserve the manufacturer-recommended USB differential impedance, minimize stubs and unnecessary vias, and keep sensitive clock and reference routing away from high-current switching nodes. Verify downstream-port current limits, power-switch selection, enumeration behavior, and thermal performance against the final enclosure and accessory load. This page consolidates verified distributor information, manufacturer product positioning, same-package comparison data, and practical integration guidance. It distinguishes confirmed USB2514B/M2 facts from parameters that require the official datasheet, helping engineers identify the correct hub controller without treating incomplete distributor summaries as complete electrical specifications.

Cotação Contato

USB2514I-HZH

USB2514I-HZH - USB 2.0 HS 4-Port Hub Controller | Microchip

Microchip Technology USB2514I-HZH is a USB 2.0 high-speed four-port hub controller packaged in a 48-pin VQFN with an exposed pad and supplied in a tray. The verified product information identifies it as a low-speed, full-speed, and high-speed hub controller operating from a 3.3 V supply. Its four-port USB interface architecture makes it relevant to systems that need to expand a single host USB connection across several peripherals while retaining USB 2.0 high-speed support. A USB hub controller is an interface integrated circuit within the broader USB interface-controller hierarchy. It manages traffic between an upstream USB host and multiple downstream USB ports, allowing peripheral devices such as keyboards, storage adapters, communications equipment, and human-interface devices to share one host port. A four-port USB 2.0 implementation is especially relevant to embedded systems, industrial control panels, test benches, and compact peripheral systems that require more attachment points than a host controller exposes directly. The verified product data highlights three defining characteristics: USB 2.0 high-speed operation, four downstream hub ports, and a 48-pin VQFN exposed-pad package. The USB2514I-HZH is also identified as an industrial-temperature-rated part. Microchip describes the related USB251xB family as cost-effective and power-efficient while using MultiTRAK technology to support mixed-speed USB data throughput. These features distinguish it from basic four-port repeater devices by placing port management, signaling, and USB connectivity in one dedicated controller. The part operates from 3.3 V and supports low-speed, full-speed, and high-speed USB devices, allowing a mixed-speed peripheral set to share the same hub. That mixed-speed capability is useful when a design includes legacy USB devices alongside high-speed peripherals. The exposed-pad package also provides a defined thermal and electrical land pattern that must be connected according to the manufacturer layout guidance rather than treated as an unused pin. Typical applications include industrial USB expansion, embedded instrumentation, laboratory data-acquisition systems, USB-to-serial equipment, and peripheral hubs for host computers or embedded controllers. In these systems, the hub can consolidate several external functions behind one upstream USB connection while the controller manages enumeration, downstream port behavior, and data traffic. The USB2422-CP-TR and USB2517I-JZX are related USB interface components available through XAIPART for broader design evaluation. Designers should verify the complete pin assignment, electrical limits, crystal or clock requirements, port-current budget, and exposed-pad connection against the manufacturer datasheet before layout release. The verified distributor information confirms a 48-pin VQFN exposed-pad package and tray packaging, but it does not provide the complete pinout, operating-temperature interval, power dissipation, or recommended external-component values. This product record combines verified manufacturer and distributor information with an explicit comparison of available same-package alternatives, commercial pricing, and application guidance. Missing technical values are marked rather than guessed, allowing engineers to distinguish confirmed USB2514I-HZH characteristics from details that still require direct datasheet verification.

Cotação Contato

USB2517-JZX

USB2517-JZX - 7-Port USB 2.0 Hi-Speed Hub Controller | Microchip

The Microchip USB2517-JZX is a versatile, cost-effective, and power-efficient 7-port USB 2.0 Hi-Speed hub controller IC in a 64-pin QFN (9x9 mm) package with exposed thermal pad, designed for low-power, small-footprint embedded USB applications. It provides seven downstream USB ports, supports Low-Speed (1.5 Mbps), Full-Speed (12 Mbps), and Hi-Speed (480 Mbps) downstream devices, and operates from a 1.8V/3.3V supply rail. A MultiTRAK™ multi-transaction translator enables concurrent Full-/Low-Speed traffic on multiple downstream ports without bandwidth starvation, and the upstream port supports Hi-Speed operation in accordance with the USB 2.0 specification (April 27, 2000, with 12/7/2000 and 5/28/2002 errata). A USB hub controller is an Interface IC that aggregates multiple USB peripherals behind a single upstream port, presenting each downstream port to the host as an independent device while managing enumeration, power, and transaction translation. Within the broader system hierarchy, the USB2517-JZX sits at Interface IC → USB Controller → USB Hub Controller → USB 2.0 Hi-Speed Hub. Hub controllers are essential building blocks of docking stations, monitors, embedded industrial PCs, and consumer electronics that need to expand a single host USB root port into several usable downstream ports. Key features include per-port or ganged power switching, individual port over-current sensing, integrated 1.5 kΩ upstream pull-up resistor, OTP/serial EEPROM configuration, and support for both bus-powered and self-powered hub topologies. The 64-QFN package with EP provides low thermal resistance and a small 9x9 mm PCB footprint. The device supports SMBus or I²C configuration, complies with USB Battery Charging Specification 1.1 pre-configurations, and integrates an internal 3.3V regulator requiring only a single 3.3V supply or a 5V VBUS-derived rail. The architecture combines a USB 2.0 physical layer (PHY) and a serial interface engine (SIE) per port with a hub repeater and a MultiTRAK transaction translator. This allows multiple Full-/Low-Speed devices to communicate simultaneously with the host at full USB 2.0 bandwidth, eliminating the bandwidth bottleneck found in single-TT hub designs. The hub repeater handles connect/disconnect, suspend/resume, and reset signaling, while per-port PHYs provide signal integrity at 480 Mbps across PCB traces of typical lengths. Typical applications include USB port expansion in monitors, docking stations, industrial PCs, embedded computing, and consumer hubs. It is also used in test equipment, automotive infotainment head units, and any product that must turn one host port into seven USB 2.0 ports. The 1.8V/3.3V flexible supply and small 9x9 mm QFN make it ideal for space-constrained embedded designs. When designing with this part, ensure that the upstream port's 90 Ω differential pair is routed as a length-matched, impedance-controlled USB 2.0 microstrip with a continuous reference ground plane. Place the 480 MHz crystal or oscillator reference as close as possible to the XI pin, and decouple each VDD pin with a 0.1 µF X7R ceramic cap tied to a solid ground pour. A common pitfall is forgetting to populate the upstream series choke or ESD protection array; the hub will enumerate but fail USB-IF compliance without these. This page synthesizes current distributor pricing, same-brand drop-in alternatives from the USB251x family, and practical design notes that go beyond the manufacturer datasheet to help engineers shorten time-to-prototype.

Cotação Contato

USB2517-JZX-TR

USB2517-JZX-TR - 7-Port USB 2.0 Hi-Speed Hub Controller | Microchip (Tape & Reel)

The Microchip USB2517-JZX-TR is a versatile, cost-effective, and power-efficient 7-port USB 2.0 Hi-Speed hub controller IC in a 64-pin QFN (9x9 mm) package with exposed thermal pad, designed for low-power, small-footprint embedded USB applications. It provides seven downstream USB ports, supports Low-Speed (1.5 Mbps), Full-Speed (12 Mbps), and Hi-Speed (480 Mbps) downstream devices, and operates from a 1.8V/3.3V supply rail. A MultiTRAK™ multi-transaction translator enables concurrent Full-/Low-Speed traffic on multiple downstream ports without bandwidth starvation, and the upstream port supports Hi-Speed operation in accordance with the USB 2.0 specification (April 27, 2000, with 12/7/2000 and 5/28/2002 errata). A USB hub controller is an Interface IC that aggregates multiple USB peripherals behind a single upstream port, presenting each downstream port to the host as an independent device while managing enumeration, power, and transaction translation. Within the broader system hierarchy, the USB2517-JZX-TR sits at Interface IC → USB Controller → USB Hub Controller → USB 2.0 Hi-Speed Hub. Hub controllers are essential building blocks of docking stations, monitors, embedded industrial PCs, and consumer electronics that need to expand a single host USB root port into several usable downstream ports. Key features include per-port or ganged power switching, individual port over-current sensing, integrated 1.5 kΩ upstream pull-up resistor, OTP/serial EEPROM configuration, and support for both bus-powered and self-powered hub topologies. The 64-QFN package with EP provides low thermal resistance and a small 9x9 mm PCB footprint. The device supports SMBus or I²C configuration, complies with USB Battery Charging Specification 1.1 pre-configurations, and integrates an internal 3.3V regulator requiring only a single 3.3V supply or a 5V VBUS-derived rail. The architecture combines a USB 2.0 physical layer (PHY) and a serial interface engine (SIE) per port with a hub repeater and a MultiTRAK transaction translator. This allows multiple Full-/Low-Speed devices to communicate simultaneously with the host at full USB 2.0 bandwidth, eliminating the bandwidth bottleneck found in single-TT hub designs. The hub repeater handles connect/disconnect, suspend/resume, and reset signaling, while per-port PHYs provide signal integrity at 480 Mbps across PCB traces of typical lengths. Typical applications include USB port expansion in monitors, docking stations, industrial PCs, embedded computing, and consumer hubs. It is also used in test equipment, automotive infotainment head units, and any product that must turn one host port into seven USB 2.0 ports. The 1.8V/3.3V flexible supply and small 9x9 mm QFN make it ideal for space-constrained embedded designs. When designing with this part, ensure that the upstream port's 90 Ω differential pair is routed as a length-matched, impedance-controlled USB 2.0 microstrip with a continuous reference ground plane. Place the 480 MHz crystal or oscillator reference as close as possible to the XI pin, and decouple each VDD pin with a 0.1 µF X7R ceramic cap tied to a solid ground pour. A common pitfall is forgetting to populate the upstream series choke or ESD protection array; the hub will enumerate but fail USB-IF compliance without these. This page synthesizes current distributor pricing, same-brand drop-in alternatives from the USB251x family, and practical design notes that go beyond the manufacturer datasheet to help engineers shorten time-to-prototype.

Cotação Contato

USB2517I-JZX

USB2517I-JZX - 7-Port USB 2.0 Hub | Microchip (Tape & Reel)

The Microchip Technology USB2517I-JZX is a USB 2.0 seven-port hub controller with seven downstream ports, USB 2.0 compliance, and a 64-pin QFN package measuring 9 mm by 9 mm. It is designed for embedded USB systems requiring low-power, configurable hub expansion. The controller supports Low-Speed, Full-Speed, and Hi-Speed downstream devices when operating as a Hi-Speed hub, while its upstream attachment can operate as a Full-Speed or Full-/Hi-Speed hub. A USB hub controller is an interface semiconductor that manages traffic between one upstream USB host and multiple downstream devices. It belongs to the USB interface controller, interface IC, and connectivity semiconductor hierarchy. The USB2517 family uses MultiTRAK technology to support mixed-speed USB environments while helping embedded designs consolidate multiple peripheral connections behind one upstream host interface. The USB2517I is identified in the verified data as the industrial-temperature-rated member of the USB2517 family. Its 64-QFN 9 x 9 mm package supports compact embedded implementations, while the integrated hub function reduces the need for discrete USB routing and control components. The device is described by Microchip as low power and OEM configurable, making it suitable for system-level USB port expansion where firmware, hub configuration, and downstream-port requirements are controlled by the OEM. Typical embedded uses include industrial equipment, test systems, printers, storage appliances, communications equipment, and other products that need more USB connections than a host controller provides directly. Because USB2517I is a hub rather than a host controller, the system still requires an upstream USB host or host-capable controller. The hub’s downstream devices can include low-speed, full-speed, and hi-speed USB peripherals, subject to the operating mode and system configuration. Designers should verify the complete pinout, power requirements, crystal or clock implementation, port-enable behavior, and configuration requirements against the manufacturer datasheet before layout. The 64-QFN package also requires careful exposed-pad thermal and assembly planning. This page combines verified manufacturer, distributor, and datasheet information with practical design context; unsupported electrical details remain marked for data completion rather than inferred.

Cotação Contato

USB2517I-JZX-TR

USB2517I-JZX-TR - 7-Port USB 2.0 Hub | Microchip

The Microchip Technology USB2517I-JZX-TR is a USB 2.0 seven-port hub controller with seven downstream ports, USB 2.0 compliance, and a 64-pin QFN package measuring 9 mm by 9 mm. It is designed for embedded USB systems requiring low-power, configurable hub expansion. The controller supports Low-Speed, Full-Speed, and Hi-Speed downstream devices when operating as a Hi-Speed hub, while its upstream attachment can operate as a Full-Speed or Full-/Hi-Speed hub. A USB hub controller is an interface semiconductor that manages traffic between one upstream USB host and multiple downstream devices. It belongs to the USB interface controller, interface IC, and connectivity semiconductor hierarchy. The USB2517 family uses MultiTRAK technology to support mixed-speed USB environments while helping embedded designs consolidate multiple peripheral connections behind one upstream host interface. The USB2517I is identified in the verified data as the industrial-temperature-rated member of the USB2517 family. Its 64-QFN 9 x 9 mm package supports compact embedded implementations, while the integrated hub function reduces the need for discrete USB routing and control components. The device is described by Microchip as low power and OEM configurable, making it suitable for system-level USB port expansion where firmware, hub configuration, and downstream-port requirements are controlled by the OEM. Typical embedded uses include industrial equipment, test systems, printers, storage appliances, communications equipment, and other products that need more USB connections than a host controller provides directly. Because USB2517I is a hub rather than a host controller, the system still requires an upstream USB host or host-capable controller. The hub’s downstream devices can include low-speed, full-speed, and hi-speed USB peripherals, subject to the operating mode and system configuration. Designers should verify the complete pinout, power requirements, crystal or clock implementation, port-enable behavior, and configuration requirements against the manufacturer datasheet before layout. The 64-QFN package also requires careful exposed-pad thermal and assembly planning. This page combines verified manufacturer, distributor, and datasheet information with practical design context; unsupported electrical details remain marked for data completion rather than inferred.

Cotação Contato

USB2524-ABZJ

USB2524-ABZJ - USB 2.0 4-Port Switching Hub | Microchip

The Microchip Technology USB2524-ABZJ is a USB 2.0 multi-switch hub controller with two upstream host connections, four downstream ports, and a 56-QFN-EP surface-mount package measuring 8 mm by 8 mm. Its stated operating supply range is 3.0 V to 3.6 V, while USB 2.0 Hi-Speed operation supports 480 Mbps signaling. The controller provides electronic reconfiguration and reassignment of any downstream port to either upstream host on the fly. A USB hub controller is an interface integrated circuit that coordinates communication between one or more USB hosts and attached peripherals. In the broader hierarchy, USB2524-ABZJ belongs to the USB interface controller family, which sits within interface ICs and broader semiconductor devices. Unlike a conventional four-port hub with only one upstream connection, this device combines a Hi-Speed hub with switching logic so two hosts can share the same downstream device set. The USB2524 is identified by Microchip as the industry's first USB switching hub combining USB Hi-Speed hub and switching functions in one device. Its two upstream ports and four downstream ports enable USB device sharing, dynamic host ownership, and reassignment without physically moving equipment. All required resistors on the USB ports are integrated according to the manufacturer data sheet, reducing discrete termination content on the PCB. Operationally, the controller is intended to work with an external USB power-distribution switch device. That external device controls VBUS switching to downstream ports, limits current, and senses over-current conditions. The separation between data-port switching and power-distribution control allows a board designer to use a suitably rated power switch instead of integrating high-current switching entirely inside the 56-QFN controller. Typical uses include shared test benches, industrial peripheral-sharing systems, embedded equipment with multiple USB hosts, kiosk configurations, and automatic test equipment that needs a peripheral to move between hosts. The 3.0 V to 3.6 V supply range suits conventional 3.3 V digital systems, although the complete board must also meet USB signal-integrity, impedance, VBUS, and current-protection requirements. Layout is the principal implementation constraint for this 56-QFN-EP device. Differential USB data pairs require controlled impedance and minimized mismatch, while the exposed pad needs a deliberate thermal and ground strategy. Designers should also follow the manufacturer's USB layout guidance and confirm external power-switch selection, port-current budgets, EEPROM requirements, and all pin functions against the current USB2524 data sheet. This page consolidates the verified manufacturer and distributor information, distinguishes confirmed electrical facts from unspecified parameters, and provides application, sourcing, and design guidance. It also records the absence of a verified pin-to-pin substitute rather than presenting functionally similar or differently packaged USB controllers as drop-in replacements.

Cotação Contato

USB2602-NU-02

USB2602-NU-02 - USB 2.0 4-Port Hub Controller | Microchip

The Microchip Technology USB2602-NU-02 is a USB 2.0 compound-device controller that combines a three-port downstream USB hub and a Flash Card Media Controller in a 128-lead TQFP package. Its operating supply range is 3 V to 3.6 V, and the listed -NU-02 ordering code identifies the USB 2.0 interface, Flash Media, four-port hub configuration supplied in a 14 mm by 14 mm TQFP package. The controller is intended to sit between one upstream USB host and downstream USB devices while also supporting Flash media connectivity. A USB hub controller is an interface IC within the broader USB interface-controller and semiconductor hierarchy. It manages port connectivity, power distribution, and data transfer between an upstream host and downstream peripherals. A compound device combines multiple USB functions within one controller, allowing the USB2602 to provide hub and Flash media functionality without requiring a separate hub controller for each function. This integration can reduce board-level component count and simplify enclosure and product design. The USB2602 family supports xD Picture Card format for licensees, as stated by the manufacturer product page. Its USB 2.0 architecture targets host-side accessories, card readers, multifunction peripherals, and embedded USB products requiring a compact hub-and-media-controller solution. The supplied distributor records identify the component as a four-port hub controller and list DigiKey and Mouser as sources for technical data, pricing, and availability. The device operates from a 3 V to 3.6 V supply, allowing use with 3.3 V system rails. Because USB devices impose strict signal-integrity, enumeration, and current-management requirements, board implementation should follow the manufacturer reference design and recommended external-component layouts rather than treating the controller as a generic USB switch. Input and output impedance-controlled traces, short differential connections, solid ground planes, and careful separation between high-current and low-level data paths are particularly important in compact four-port implementations. Typical installations include USB 2.0 card readers, multifunction docking products, removable-media appliances, and compact embedded USB hubs. The integrated hub and Flash media functions are useful where one upstream connection must serve multiple USB peripherals while also reading Flash-based storage. Engineers should confirm host compatibility, supported media formats, electrical characteristics, and enclosure requirements against the current manufacturer documentation before production release. The principal design consideration is validating the complete USB power, firmware, and signal path rather than selecting the IC from headline hub features alone. The 3.3 V supply requirement, upstream and downstream routing, downstream-port current budget, Flash interface implementation, and mechanical package all affect whether the controller is suitable for a given product. This page combines manufacturer function data, distributor availability references, package information, sourcing links, and application-focused engineering guidance. It also distinguishes verified USB2602-NU-02 data from suffix variants whose detailed electrical and pin-level differences are not supplied in the source material, helping engineers make a safer procurement or replacement decision.

Cotação Contato

USB2642-I/ML

USB2642-I/ML - USB 2.0 Hub Card Reader | Microchip

The Microchip Technology USB2642-I/ML is a USB 2.0 high-speed hub and flash media card controller combination IC with two downstream USB ports and an SD/MMC interface, supplied in a 48-QFN 7 mm × 7 mm package. It operates from a 3.3 V supply and supports low-speed, full-speed, and high-speed USB devices. The integrated design combines USB expansion and flash media reader/writer functionality in one controller. A USB hub controller is an interface device that expands one host USB connection into multiple downstream ports while managing USB traffic and device connections. A flash media card controller provides read/write access to supported SD or MMC flash media. In the broader electronics hierarchy, the USB2642 belongs to interface ICs, USB interface controllers, USB 2.0 hub controllers, and combined flash media controllers. The principal verified features are USB 2.0 compliance, high-speed operation, two downstream USB ports, and one SD/MMC flash media card interface. Its 48-QFN package supports compact surface-mount designs, while the exposed-pad package construction provides a defined thermal and electrical land pattern. The device is intended for systems that need local USB port expansion together with removable flash-media connectivity. Typical uses include USB docking stations, compact desktop computers, consumer electronics, card-reader equipment, printers, storage accessories, and embedded USB peripherals. Because the controller consolidates hub and media-card functions, it can reduce the number of separate interface devices required in a compact system. Designers must still account for USB signal routing, connector protection, supply decoupling, card-detect wiring, and the exposed thermal pad when laying out the PCB. For USB2642-I/ML designs, confirm the exact pin functions, electrical limits, reference circuitry, and supported media details against the Microchip datasheet before release. USB high-speed pairs require controlled impedance and careful return-path continuity; card-interface traces should be kept away from noisy switching nodes. The part is not a general-purpose power semiconductor, so a Safe Operating Area chart is not applicable. This page combines the verified manufacturer and distributor information with package, application, procurement, and replacement guidance. It is intended to help engineers identify whether the USB2642-I/ML matches a USB hub plus flash-media architecture before committing the 48-QFN footprint to a PCB layout.

Cotação Contato

USB2642/ML

USB2642/ML - USB 2.0 Hub and Card Controller | Microchip

The Microchip Technology USB2642/ML is a USB 2.0 hi-speed hub and flash media card controller combo with 2 downstream USB ports and an SD/MMC interface, supplied in a 48-QFN package. It operates from a 3.3 V supply according to the verified distributor data. The device combines USB expansion and flash media reader/writer integration in one controller. A USB hub controller is an interface semiconductor that manages one upstream USB connection and distributes traffic to downstream ports. A flash media card controller adds access to removable memory through SD or MMC interfaces. The USB2642/ML therefore belongs to the USB interface IC hierarchy: USB controller, interface IC, semiconductor, and embedded connectivity device. The principal features are USB 2.0 high-speed operation, two downstream USB 2.0 ports, and an SD/MMC flash media interface. The verified manufacturer description also identifies the device as a cost-effective, energy-efficient, fully integrated solution. Its integrated design can reduce the need for separate hub and media-reader interface circuitry while supporting both USB expansion and card access. The USB2642/ML is suitable for compact USB hubs, card readers, multifunction peripherals, docking systems, and embedded USB storage products. According to the manufacturer product page, it provides a USB expansion and flash media reader/writer combination in a single chip. The datasheet search results additionally describe sustained flash-media transfer rates exceeding 35 MB/s, although the exact system throughput depends on the attached device and implementation. Designs must follow the manufacturer datasheet for decoupling, USB signal routing, card-interface layout, and exposed-pad thermal management. USB differential pairs should be routed with controlled impedance and minimized discontinuities. The SD/MMC interface and USB connectors should be placed to reduce signal coupling, while the power network should provide low-impedance return paths for both digital and high-current USB loads. This page consolidates the verified manufacturer and distributor information, procurement context, package details, and application guidance for USB2642/ML. It also distinguishes the available same-family Microchip variants without presenting unverified cross-brand replacements as drop-in equivalents.

Cotação Contato

USB2642T-I/ML

USB2642T-I/ML - USB 2.0 Hub and Card Controller | Microchip

The Microchip Technology USB2642T-I/ML is a USB 2.0 high-speed hub and flash media card controller combination with two downstream USB 2.0 ports, a 3.3 V interface, and sustained flash-media transfer rates exceeding 35 MB/s. It is housed in a 48-pin 7 mm × 7 mm QFN package with an exposed pad and is designated for an industrial temperature range of -40°C to +85°C. A USB hub controller is an interface IC that expands one upstream USB connection into multiple downstream ports while managing USB traffic and attached-device power. A flash media card controller adds read/write access to removable flash storage through supported media interfaces. Combined, the USB2642 belongs to the broader USB interface controller hierarchy, where USB bus interfacing, port expansion, and storage-device connectivity are consolidated into one controller. The principal feature is integration: two USB 2.0 downstream ports and flash-media reader/writer functionality share one device rather than requiring separate hub and card-reader controllers. The manufacturer datasheet identifies USB 2.0 high-speed operation, support for eMMC, and sustained flash transfer rates exceeding 35 MB/s. The available part also lists I2C, SPI, and USB interfaces, providing configuration and connectivity options for embedded host systems. The USB2642 architecture is intended to place a USB host interface, downstream-port control, flash-media access, and supporting digital interfaces in one surface-mount IC. Its 48-QFN package provides a compact 7 mm × 7 mm footprint, but the exposed thermal pad requires careful PCB layout and adequate copper for heat dissipation. The -I ordering designation identifies the industrial -40°C to +85°C operating range shown in the comparison data. Typical uses include multifunction printers, set-top boxes, digital media systems, industrial HMI panels, and compact embedded USB systems that need both peripheral expansion and flash-card access. In such systems, the controller can connect storage media to an existing USB host while presenting two downstream USB ports for peripherals, reducing component count relative to separate controllers. The primary design consideration is power and signal integrity. Layout must preserve USB differential-pair routing, provide the decoupling and exposed-pad thermal structure required by the datasheet, and account for downstream-port current requirements. Designers should also verify card-format support, host-driver compatibility, firmware configuration, and connector protection before committing the USB2642T-I/ML to a new design. This page consolidates verified distributor pricing, package and interface details, manufacturer documentation, and a practical assessment of the limited directly verifiable drop-in alternatives. It also distinguishes confirmed USB2642 family variants from broader functional equivalents that cannot be represented as pin-compatible replacements without additional board-level verification.

Cotação Contato

USB2642T/ML

USB2642T/ML USB 2.0 Hub and Flash Controller | Microchip

The Microchip Technology USB2642T/ML is a USB 2.0 high-speed hub and flash media card controller combo with USB, I2C, and SPI interfaces, supplied in a 48-QFN 7x7 mm package. It integrates USB expansion with flash-media reader and writer functionality, supporting low-speed, full-speed, and high-speed USB 2.0 devices. The device is identified by distributor listings as a specialized controller-interface IC with a 48-QFN package and exposed pad. A USB hub controller is an interface IC that expands one host USB port into multiple downstream connections while managing USB traffic and device attachment. The flash media card controller portion adds access to supported flash media formats, creating a compact bridge between a USB host, USB peripherals, and removable storage. This combination is useful in docking stations, embedded systems, printers, set-top equipment, and compact industrial controllers where board space and peripheral integration are important. The verified device data identifies USB 2.0 low-, full-, and high-speed operation, I2C and SPI interfaces, USB hub functionality, and flash-media controller functionality. The 48-QFN package provides a high pin count for integrated USB and storage connectivity, while the exposed pad supports thermal management on a suitably designed PCB. The exact supported media formats, electrical limits, operating-temperature range, and complete pin assignment are not provided in the supplied search data and must be confirmed from the manufacturer datasheet. Typical implementation places the USB2642T/ML between a USB host controller and downstream USB ports, with flash-media interfaces serving external storage devices. Firmware must configure the hub and media-access functions, while the host system supplies reference, clock, power, and I2C or SPI control. Designers should follow Microchip's USB routing, impedance, decoupling, and exposed-pad guidance rather than treating the QFN footprint as a generic package. The principal design consideration is signal integrity. USB high-speed edges require controlled impedance, short routing, continuous return paths, minimized stubs, and careful separation from noisy power and digital clocks. The exposed thermal pad must be connected to the intended ground or thermal plane according to the datasheet land pattern, and adequate decoupling must be placed close to the supply pins. This page combines verified manufacturer and distributor descriptions, practical USB design considerations, and explicit data gaps for parameters not present in the supplied source material.

Cotação Contato

USB2660I-JZX-03

USB2660I-JZX-03 - USB 2.0 Hub & Multi-Format Flash Controller | Microchip

The Microchip Technology USB2660I-JZX-03 is a USB 2.0 Hi-Speed hub controller combined with a multi-format flash media reader/writer and dual Secure Digital (SD) interfaces, integrated in a single chip. Per the Microchip USB2660/USB2660i datasheet (DS00001931B), this combo device delivers up to 480 Mbps Hi-Speed USB performance, two downstream USB 2.0 ports, and multi-format flash card support including SD, MMC, Memory Stick, and xD-Picture Card. The device is housed in a 64-pin QFN (JZX) 9x9 mm package with exposed thermal pad, designed for surface mount desktop and notebook PC applications. The industrial temperature grade (-40C to +85C) makes the USB2660I variant suitable for non-consumer embedded use cases where the commercial-grade USB2660 is insufficient. A USB 2.0 Hi-Speed hub controller is a category of USB peripheral that aggregates multiple downstream ports and card-reader functions behind a single upstream port, while a flash media controller is a class of storage interface IC that bridges a host processor to removable flash memory cards using standardized protocols such as SD, MMC, and MSPro. The USB2660I sits at the intersection of these two product types, forming part of the broader USB interface IC hierarchy: USB peripheral controller -> USB hub controller -> combo hub + media reader -> Microchip USB264x/2660 family. This combination reduces PCB area, BOM count, and design complexity for system integrators that would otherwise need a separate hub chip and card-reader chip. Key features of the USB2660I-JZX-03 include 2 downstream USB 2.0 Hi-Speed ports, an internal transaction translator for mixed-speed USB environments, multi-format flash card support with dual SD interfaces, integrated card power FETs, on-board 24 MHz crystal driver, and USB-IF certified hub silicon. The chip is USB 2.0 compliant and supports Suspend and low-power modes per the USB specification. Programmable through an external I2C EEPROM, the device enables custom vendor/product IDs, string descriptors, and manufacturer-specific behavior. Internally the USB2660I uses Microchip's proven UTMI+ compliant physical layer and a hardened Hi-Speed USB 2.0 hub topology that delivers industry-leading data throughput in mixed-speed environments where some downstream devices run at Full-Speed (12 Mbps) and others at Hi-Speed (480 Mbps). The integrated media controller supports USB Mass Storage class and SDIO bridging, enabling SDIO peripherals to enumerate over USB with custom firmware. Typical applications include desktop and notebook PCs, multi-function printers with card reader slots, docking stations, set-top boxes, and industrial panel PCs that expose SD card slots and multiple USB ports to end users. Designers use the USB2660I-JZX-03 to consolidate USB expansion and media reading onto a single 9x9 mm QFN. When designing with the USB2660I-JZX-03, allocate at least four PCB layers for clean USB signal routing, route the differential DP/DM pair as a 90-ohm impedance-matched pair, and provide a local 0.1 uF decoupling cap adjacent to every power pin. The exposed thermal pad must be soldered to a contiguous ground pour to meet USB-IF Hub Certification thermal-rise limits.

Cotação Contato

USB3320C-EZK

USB3320C-EZK - Hi-Speed USB 2.0 ULPI Transceiver | Microchip

The Microchip USB3320C-EZK is a highly integrated full-featured Hi-Speed USB 2.0 transceiver built on the proven ULPI (UTMI+ Low Pin Interface) standard, housed in a 32-pin QFN (5x5 mm) package. It supports 480 Mbps High-Speed and 12 Mbps Full-Speed USB signaling, operates from a single 3.3 V supply with on-chip 1.8 V LDO regulator, and provides up to +30 V VBUS ESD protection on the USB connector side. A USB 2.0 transceiver (also called a PHY) is the physical-layer analog block that sits between a digital SoC's ULPI/UTMI link and the differential DP/DM lines of a USB connector. It handles HS chirp, packet detection, serializer/deserializer, and clock recovery, while leaving link-layer protocol to the host controller. Within the system hierarchy, the USB3320C-EZK is a peripheral controller companion IC: SoC (application processor) -> ULPI link -> USB3320 PHY -> DP/DM -> USB connector. This split architecture lets designers pair an inexpensive PHY with any SoC that exposes ULPI pins (NXP i.MX, ST STM32, Xilinx Zynq, TI Sitara). Key electrical characteristics include 480 Mbps Hi-Speed data rate, internal 1.8 V regulator eliminating external LDO, integrated 45 ohm HS termination resistors (no external Rs needed), 8-bit single-data-rate ULPI interface with 60 MHz reference clock, and integrated USB charger-detection hardware. The device is USB 2.0 specification compliant, USB Battery Charging v1.2 capable, and OTG-ready via the ID pin. The architecture uses a 60 MHz reference clock input (REFCLK) generated by the SoC, an internal PLL multiplies to 480 MHz for HS operations. A digital state machine handles UTMI/ULPI command interpretation, while the analog block performs line termination, current-mode driver bias, and disconnect detection. The chip supports both host and peripheral roles. Typical applications include USB 2.0 device/host ports on single-board computers, OTG ports on industrial tablets, automotive infotainment USB interfaces, medical device USB ports, and 5G/LTE modem modules with USB 2.0 diagnostic channels. Designers favor the USB3320C-EZK over UTMI-only PHYs because ULPI slashes pin count to 12 versus UTMI's 30+. When designing with this device, maintain 90-ohm differential impedance on DP/DM traces to the connector, place decoupling capacitors on VDD33/VDD18/VBAT as close as possible to the IC, and ensure the REFCLK signal has less than 50 ps jitter to pass USB compliance. Do not omit the ID pin pull-up for OTG or charger-detection operation.

Cotação Contato

USB3803

USB3803 - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip

The Microchip USB3803 is a three-port USB 2.0 Hi-Speed hub controller optimized for portable, battery-powered embedded systems, integrating BC 1.1 charger detection, flexible internal power regulators, and a 25-ball WLCSP package. It connects to an upstream port as a Full-Speed or Hi-Speed hub and supports Low, Full, and Hi-Speed downstream devices on all enabled ports. The device targets tablets, smartphones, and other mobile platforms where small footprint, low standby current, and minimal BOM are critical design constraints. A USB hub controller is a dedicated interface IC that aggregates multiple downstream USB ports behind a single upstream port, handling transaction translation, port power control, and suspend/resume signaling. In the broader USB-IF taxonomy, hubs sit between hosts (root hubs inside PC chipsets) and peripherals, implementing Chapter 11 of the USB 2.0 specification. The USB3803 belongs to the "embedded hub" sub-category, optimized for integration into battery-powered devices rather than stand-alone retail hubs. Key features include 480 Mbps Hi-Speed upstream support, integrated USB-IF Battery Charging 1.1 detection on the upstream port, integrated 5V-to-3.3V and 1.8V regulators, a serial slave (I2C) interface for status/configuration, and ultra-low standby and bypass current modes. The WLCSP-25 package measures only 2.0 x 2.0 mm, enabling placement on space-constrained mobile mainboards. Microchip's Bypass mode (USB3803C variants) reduces quiescent current to single-digit microamperes when the host is off, directly extending battery life. Architecturally, the USB3803 integrates a Hi-Speed UTMI/ULPI-less PHY, a serial interface engine (SIE), per-port transaction translators, and the charger-detection analog block. The on-chip regulators remove the need for external LDO components when powered from a single 5V VBAT rail, further shrinking BOM count. The I2C serial slave interface exposes charger-status and configuration registers, allowing the application processor to query attach type, port power status, and override default settings. Typical applications include tablets and 2-in-1 laptops requiring one USB-A expansion port, smartphone accessories with OTG-to-host bridging, portable medical devices, and embedded infotainment head units. The charger-detection block also enables the device to act as a charger-sensing front-end, reporting Standard Downstream Port (SDP), Charging Downstream Port (CDP), or Dedicated Charging Port (DCP) classification back to the application processor over I2C. When designing with this part, allocate adequate PCB area under the WLCSP for the exposed die pad and route the 90-ohm differential USB pairs with controlled impedance. Microchip's USBCheck online design review service is available free of charge to qualified customers using the USB3803 in production designs. This page synthesizes distributor stock, application-grade alternatives, and practical layout notes not found in the manufacturer datasheet, giving embedded engineers a single decision-ready reference.

Cotação Contato

Subcategorias

Produtos (35.000+)

USB2513B-AEZC - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip (Tape & Reel)

USB2513B-AEZC-TR - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip

USB2513B-I/M2 - 3-Port USB 2.0 Hub | Microchip

USB2513B/M2 - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip

USB2513BT/M2 - USB 2.0 3-Port Hub | Microchip

USB2514-AEZG - 4-Port USB 2.0 Hub Controller | Microchip

USB2514-AEZG-TR - 4-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)

USB2514-HZH USB 2.0 Four-Port Hub Controller | Microchip

USB2514B-AEZC - 4-Port USB 2.0 Hi-Speed Hub Controller | Microchip

USB2514B/M2 - 4-Port USB 2.0 Hub Controller | Microchip

USB2514I-HZH - USB 2.0 HS 4-Port Hub Controller | Microchip

USB2517-JZX - 7-Port USB 2.0 Hi-Speed Hub Controller | Microchip

USB2517-JZX-TR - 7-Port USB 2.0 Hi-Speed Hub Controller | Microchip (Tape & Reel)

USB2517I-JZX - 7-Port USB 2.0 Hub | Microchip (Tape & Reel)

USB2517I-JZX-TR - 7-Port USB 2.0 Hub | Microchip

USB2524-ABZJ - USB 2.0 4-Port Switching Hub | Microchip

USB2602-NU-02 - USB 2.0 4-Port Hub Controller | Microchip

USB2642-I/ML - USB 2.0 Hub Card Reader | Microchip

USB2642/ML - USB 2.0 Hub and Card Controller | Microchip

USB2642T-I/ML - USB 2.0 Hub and Card Controller | Microchip

USB2642T/ML USB 2.0 Hub and Flash Controller | Microchip

USB2660I-JZX-03 - USB 2.0 Hub & Multi-Format Flash Controller | Microchip

USB3320C-EZK - Hi-Speed USB 2.0 ULPI Transceiver | Microchip

USB3803 - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip