Circuitos Integrados

AK5556VN

AK5556VN - 32-Bit 6-Channel Audio ADC | Asahi Kasei

The Asahi Kasei Microsystems AK5556VN is a 32-bit, 6-channel differential audio ADC with 768 kHz sampling, 115 dB dynamic range, and 106 dB signal-to-noise-plus-distortion performance. It is packaged in a 64-QFN (9 x 9 mm) package and is designed for digital audio systems, mixers, multi-channel recorders, and professional audio equipment. The AK5556VN also supports PCM and DSD output, including DSD operation up to 11.2 MHz, and provides four selectable digital filter types. An audio analog-to-digital converter is a specialized data-converter IC that converts multiple differential analog audio inputs into high-resolution digital samples. In the broader hierarchy, the AK5556VN is an ADC, a data-converter IC, and a semiconductor used in digital audio and signal-processing systems. Its six-channel differential architecture is intended to capture several balanced audio channels with consistent conversion performance and reduced channel-count complexity. The principal specifications shown in the verified data are 32-bit resolution, six ADC channels, a maximum sampling frequency of 768 kHz, 115 dB dynamic range, and 106 dB SN+D. Four integrated digital filters can be selected according to the desired sound-quality preference. The device supports TDM audio formats for connection to a DSP, while DSD output support extends its use to high-resolution digital-audio systems. The AK5556VN uses a differential-input architecture, allowing balanced analog sources to be connected to the converter and helping reject common-mode noise when the circuit is implemented with suitable analog signal-chain design. The six-channel arrangement makes it suitable for surround mixing, recording, monitoring, and multichannel conversion systems. Channel summation can improve the claimed dynamic range to 118 dB in suitable multi-channel operation, according to the manufacturer datasheet information provided in the verified sources. Typical applications include professional mixers, multi-channel recorders, studio monitors, broadcast audio equipment, digital audio workstations, and embedded DSP audio-capture systems. Its TDM support can simplify connection to a DSP that accepts time-division-multiplexed audio data. In systems using DSD, the converter can provide output up to 11.2 MHz, although the complete signal chain must support the associated data rate and clocking requirements. Designers should verify the complete AK5556VN pinout, exposed-pad connection, analog input routing, reference-voltage requirements, clock configuration, digital interface mode, and power-supply sequencing against the manufacturer datasheet before layout. The 64-QFN package also requires a suitable thermal and grounding strategy, particularly when operating at high sampling rates or with high channel utilization. This product data consolidates the verified 32-bit, 768 kHz, six-channel, 115 dB dynamic-range, 106 dB SN+D, PCM, TDM, and DSD information, compares the documented feature set, and highlights practical application and sourcing considerations beyond a basic distributor listing.

Cotação Contato

AK5558VN

AK5558VN - 32-bit 768kHz 8ch Audio ADC, 64-QFN | AKM

The Asahi Kasei Microdevices (AKM) AK5558VN is a 32-bit, 768 kHz sampling, 8-channel premium audio A/D converter for professional digital audio systems, housed in a 64-pin QFN (9x9 mm) package with exposed pad. It achieves 115 dB dynamic range and 106 dB S/(N+D) while maintaining low power consumption, and supports both PCM and DSD output modes. Channel summation across the eight differential inputs can further extend dynamic range to 118 dB in 8-to-1 mode. An audio ADC (analog-to-digital converter) is a specialized data converter that translates continuous analog audio signals into high-fidelity digital codes using delta-sigma modulation and decimation filtering. Premium audio ADCs target professional recording, broadcast, and high-resolution consumer audio where dynamic range, channel count, and low noise floor matter more than raw sampling speed. The AK5558VN sits inside the data converter IC family and the broader signal-conditioning semiconductor category. Key features include differential analog inputs on all eight channels, four selectable digital filters (sharp roll-off, slow roll-off, short delay, and low-latency), 32-bit PCM output up to 768 kHz, DSD output up to 11.2 MHz, and TDM audio interface support for direct connection to a DSP. AKM's multi-bit delta-sigma architecture combines with channel summation (2-to-1, 4-to-1, 8-to-1) to deliver 118 dB dynamic range when channels are averaged, enabling mixer-grade recording performance. Typical applications include professional mixing consoles, multi-channel studio recorders, USB audio interfaces, AV receivers with multichannel capture, and automotive premium audio head units. The device's 64-QFN exposed-pad package provides the thermal performance required for sustained 8-channel operation at 768 kHz. When designing with this part, place decoupling capacitors as close as possible to the AVDD and LVDD pins, and short the exposed pad to a solid ground plane for thermal dissipation. Verify TDM slot mapping with your DSP before PCB layout finalization.

Cotação Contato

AK5572EN

AK5572EN - 32-Bit 768kHz Stereo Audio ADC | AKM

The Asahi Kasei Microdevices AK5572EN is a 32-bit, 768kHz sampling, 2-channel differential audio ADC with 121dB dynamic range, 112dB S/(N+D), and a 48-VFQFN 7x7mm package. It is designed for premium digital audio systems requiring high-resolution PCM conversion and DSD support up to 11.2MHz. Four selectable digital-filter types allow sound-quality optimization, while TDM compatibility simplifies connection to DSP-based mixers and multichannel recorders. An audio ADC is a mixed-signal integrated circuit that converts differential analog audio signals into digital words for processing, storage, or transmission. The AK5572EN belongs to the ADC and DAC hierarchy within data-converter ICs and broader signal-chain semiconductors. Its stereo differential architecture supports balanced audio inputs, while selectable operating modes and interface formats provide flexibility across professional recording equipment, mixer consoles, USB audio interfaces, and premium home-audio equipment. Key performance features include 32-bit conversion, a maximum sampling rate of 768kHz, 121dB dynamic range, and 112dB signal-to-noise-plus-distortion performance. The converter supports I2S digital audio, multiple TDM configurations, and DSD output up to 11.2MHz. According to the manufacturer product page and English datasheet, these capabilities position the device as a high-performance audio conversion solution with low-power operation and integrated filtering. The AK5572EN includes four types of digital filters that can be selected according to the desired sound-quality preference. Its TDM support allows direct connection to DSPs, reducing external interface complexity in multichannel systems. MSB-first, two's-complement serial data and broad digital-interface selection make the device suitable for designs requiring flexible clocking and source synchronization. Typical applications include digital mixers, multichannel recorders, premium USB audio interfaces, professional studio converters, and DSD-capable playback equipment. Analog signal integrity remains critical: differential routing, symmetrical inputs, careful clock layout, and a clean low-noise supply help preserve the converter's 121dB dynamic range. The 48-VFQFN exposed-pad package also requires a thermal-aware PCB layout to dissipate heat reliably. When selecting a replacement, engineers should verify the complete pin definition, analog input range, clock topology, supported digital format, filter settings, control interface, and exposed-pad layout rather than relying on resolution and sample rate alone. The available cross-reference results do not establish a verified pin-to-pin substitute, so equivalent parts are not presented as drop-in alternatives. This page combines verified manufacturer performance claims, source links, interface details, application guidance, and replacement-validation criteria. It distinguishes confirmed AK5572EN capabilities from electrical values that still require confirmation from the datasheet, providing more practical design guidance than a distributor listing alone.

Cotação Contato

AK5574EN

AK5574EN - 32-Bit 768 kHz 4-Channel Audio ADC | AKM

Asahi Kasei Microdevices AK5574EN is a 32-bit, 768 kHz sampling, four-channel differential audio A/D converter in a 48-QFN (7 mm × 7 mm) package with an exposed pad. It provides 121 dB dynamic range, 112 dB S/(N+D), digital filtering, power-down operation, channel summation, TDM audio interfacing, and DSD output support up to 11.2 MHz. The device is designed for high-resolution digital audio systems requiring differential analog inputs and flexible digital audio formats. An audio ADC is a specialized data-converter IC that converts four analog audio channels into digital PCM or DSD data for processing by a DSP, receiver, recorder, or mixer. The AK5574EN belongs to the delta-sigma ADC family within the broader ADC and DAC product hierarchy, combining multichannel conversion, digital filtering, clocking, and serial audio interfaces in one device. Key features include 32-bit conversion, a maximum sampling frequency of 768 kHz, four differential inputs, 121 dB dynamic range, and 112 dB signal-to-noise-plus-distortion performance. According to the Asahi Kasei Microdevices product page, the converter maintains low power-consumption performance while supporting selectable digital filters. The exposed thermal pad provides the primary thermal and electrical connection to the PCB. The AK5574EN supports multiple digital interfaces, including I2S-compatible and TDM audio formats, with the digital interface selected through configuration pins. Its serial data uses MSB-first, two's-complement representation. DSD capability extends the converter beyond conventional PCM operation, making it applicable to high-resolution audio equipment where DSD playback or recording is required. Typical applications include professional digital mixers, multichannel recorders, studio monitoring equipment, broadcast consoles, high-end digital audio interfaces, and DSP-based audio systems. The four-channel architecture reduces the number of converters required when multiple balanced analog inputs must be digitized simultaneously. When designing around the AK5574EN, place the exposed pad according to the manufacturer datasheet and provide the required analog, digital, and ground-plane connections. The device's performance depends on clean analog input routing, appropriate clocking, supported interface configuration, and careful separation of sensitive analog signals from digital return currents.

Cotação Contato

AK5578EN

AK5578EN - 8-Ch 32-Bit 768kHz Audio ADC | AKM

The Asahi Kasei Microdevices AK5578EN is an 8-channel, 32-bit, 768 kHz sampling differential-input audio A/D converter with 121 dB dynamic range and 112 dB S/(N+D), housed in a 64-pin QFN (9x9 mm) surface-mount package. An audio ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples analog audio voltages and converts them into high-resolution digital words for downstream processing. The AK5578EN belongs to the AKM AK557x family of premium audio converters, sitting in the hierarchy audio ADC -> delta-sigma converter -> data converter IC -> mixed-signal semiconductor. It targets digital audio systems where multichannel, high-resolution capture is required, such as professional mixers, multichannel recorders, broadcast consoles and high-end measurement equipment. Key specifications differentiate this converter: 8 differential input channels, 32-bit word length, 768 kHz maximum sampling rate, 121 dB dynamic range and 112 dB signal-to-noise-plus-distortion ratio. It also integrates four selectable digital filter types so engineers can trade phase behaviour and frequency response against sound-quality preference, and it supports DSD output up to 11.2 MHz for native DSD capture workflows. Technically, the AK5578 is AKM's third-generation premium audio ADC architecture, providing a TDM-compatible digital audio interface for straightforward connection to a DSP, in addition to I2S-class serial audio transport. Because the digital interface supports TDM audio formats, a single serial bus can carry multiple channels, reducing routing complexity in multichannel designs. AKM also documents that channel summation improves the dynamic range to 124 dB in 8-to-1 mode, a useful option when fewer channels are physically wired but maximum SNR is still desired. Typical applications include professional digital mixers, multichannel PCM recorders, studio monitor controllers, broadcast and mastering equipment, and audio measurement or test setups. The 8-channel, TDM-capable architecture makes it particularly efficient for equipment with many balanced inputs. A key design consideration is interface planning: budget TDM slot timing and the digital audio clocking between the AK5578EN and the host DSP, and confirm the required analog input filtering and reference layout in the manufacturer's application guidance. Operating voltage, package thermal data and absolute maximum ratings should be confirmed against the datasheet before layout release. This page consolidates manufacturer documentation, distributor pricing as of 2026-10-30, drop-in alternatives within the AKM converter family, and practical design notes that are not gathered together in the original AKM datasheet or a single distributor listing.

Cotação Contato

AK5704EN

AK5704EN - 4-Channel 32-Bit 192kHz ADC | Asahi Kasei

Asahi Kasei Microdevices AK5704EN is a low-power four-channel 32-bit audio analog-to-digital converter with an integrated low-noise microphone amplifier, digital audio interface, PLL, and voice activity detection in a 28-pin QFN package measuring 4 mm by 4 mm. The device supports conversion up to 192 kHz and delivers 105 dB dynamic range for high-fidelity microphone capture. Its microphone amplifier can support up to 16 channels according to the manufacturer product information. An audio ADC is a specialized data-acquisition IC that converts microphone or line-level analog signals into digital samples for transmission, recording, or processing. Within the broader semiconductor hierarchy, the AK5704EN is an analog front end: a microphone amplifier and high-resolution ADC are integrated ahead of a digital audio interface. This combination reduces the number of external analog components and allows captured voice data to be supplied directly to an audio processor through a digital serial interface. The AK5704EN provides four 32-bit ADC channels, a 192 kHz maximum sampling rate, and I2S-format digital audio output. Its integrated low-noise microphone amplifier is designed to preserve the dynamic range of high-S/N microphones, while low power consumption supports portable and always-listening equipment. The integrated PLL supports systems requiring synchronized digital audio clocks, and voice activity detection can reduce unnecessary processing when no qualifying speech activity is present. The 28-QFN package consolidates four capture channels, analog conditioning, conversion, clocking, and digital output into a 4 mm by 4 mm footprint. This mixed-signal integration reduces board area, but the exposed-pad package requires careful PCB layout and thermal management. The I2S interface provides a conventional connection to audio codecs, digital signal processors, application processors, and other host devices. Typical uses include voice-recognition microphones, far-field voice control, conference terminals, smart speakers, hearing-support equipment, and connected microphones. In these systems, the AK5704EN can digitize microphone signals close to the transducer, limiting analog trace length and reducing susceptibility to interference. Its 192 kHz capability also supports high-resolution capture workflows where the host must still perform decimation or sample-rate conversion. For implementation, follow the manufacturer’s recommended input, clock, power, and exposed-pad layout instructions. Confirm microphone gain, analog input range, clock stability, interface mode, and channel aggregation before PCB release; the supplied web excerpts do not expose the complete electrical limits or pin definitions. Treat the values below as sourced facts and verify all marker-designated details against the current manufacturer datasheet. This page consolidates the verified manufacturer and distributor findings for the AK5704EN, documents the distinction between confirmed characteristics and unavailable technical details, and explains practical selection, layout, and signal-chain considerations beyond a basic distributor listing. Pricing reflects the observed source value as of 2026-10-28, while lifecycle, compliance, pinout, and detailed electrical conditions should be reconfirmed before production release.

Cotação Contato

AK5720VT

AK5720VT - 24-Bit 96kHz Stereo Audio ADC | AKM

The Asahi Kasei Microdevices/AKM AK5720VT is a low-voltage, dual-channel, 24-bit audio analog-to-digital converter with a maximum sampling rate of 96 kHz, 102 dB dynamic range, I2S-compatible digital audio output, and an integrated input gain amplifier. It is packaged in a compact 16-pin TSSOP measuring approximately 4.40 mm wide. The integrated gain amplifier makes the converter suitable for microphone input stages, while the single-ended analog inputs help reduce the external signal-conditioning required in a digital-audio design. An audio ADC is a mixed-signal data-conversion IC that accepts analog audio voltage signals, samples them at controlled intervals, and converts each sample into a high-resolution digital representation. This function belongs to the broader ADC and DAC hierarchy, which forms part of the converter-IC and signal-processing markets. The AK5720VT is specifically an audio converter rather than a general-purpose instrumentation ADC, so its architecture and interfaces are optimized for digital-audio timing, channel data, and audio signal-chain requirements. The principal specifications available from the supplied manufacturer and distributor records include 24-bit conversion resolution, 96 kHz sampling capability, two-channel operation, 102 dB dynamic range, I2S digital output, and an integrated input gain amplifier. Its single-ended analog input arrangement can simplify the microphone preamplifier layout. The 16-TSSOP package is also substantially smaller than many older discrete multi-channel audio converter packages, although its exposed lead pitch still requires careful PCB layout. The AK5720VT supports digital-audio systems operating at up to 24 bits and 96 kHz. Its 102 dB dynamic range is relevant to applications where signal amplitude changes significantly and quiet passages must remain distinguishable from louder program material. The integrated input gain amplifier reduces the need for a separate gain stage when designing compact microphone-oriented front ends, while I2S-compatible output supports connection to digital-audio processors, receivers, transmitters, and interface controllers. Typical uses include digital recording equipment, microphone preampliers, sound-field acquisition systems, consumer-audio equipment, and industrial monitoring products. In each case, the converter’s role is to transform the analog microphone or line-level signal into digital audio data. System-level signal-to-noise performance still depends on the analog gain structure, power supply quality, clocking, grounding, PCB layout, and the performance of the downstream digital-audio processor. The primary design consideration is to treat the AK5720VT as a mixed-signal device. Place input and decoupling capacitors close to the appropriate pins, keep analog and digital return-current paths controlled, and use a clean clock source. Because the supplied records do not provide the complete manufacturer pin table, exact electrical limits, power-supply range, or absolute maximum ratings, those items should be confirmed in the manufacturer datasheet before schematic capture. This page consolidates the verified AKM product description, distributor specifications, sourcing links, interface details, and engineering guidance. It also distinguishes documented AK5720VT characteristics from parameters that require datasheet confirmation, helping engineers evaluate this 24-bit, 96 kHz audio ADC without confusing a similar converter with a verified drop-in replacement.

Cotação Contato

AK8413VQ

AK8413VQ - AKM ADC Integrated Circuit | QFP Package

The Asahi Kasei Microdevices / AKM Semiconductor AK8413VQ is an integrated circuit analog-to-digital converter from the Data Acquisition ADC product family, originally offered in a QFP-style surface-mount package. The part is a member of AKM's data converter portfolio and is currently flagged Obsolete by major distributors, with limited inventory (e.g., 13,600 units reported in distribution channels) and no active production. According to the Verified Web Data, the AK8413VQ is RoHS compliant and ships in Bulk packaging configuration as a legacy AKM IC. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples continuous analog input signals and converts them into a digital code word for processing by a microcontroller, DSP, or FPGA. ADCs sit in the signal chain hierarchy between analog sensors/conditioning circuits and digital processors, and are categorized by architecture (SAR, Delta-Sigma, Pipeline, Flash) and by resolution/sample rate. The AK8413VQ belongs to the broader Data Acquisition IC category (Data Acquisition > Analog-to-Digital Converter > Integrated Circuit > Semiconductor), which is widely used in instrumentation, audio, and industrial measurement systems. Key attributes visible in distributor listings indicate this part is positioned as a general-purpose data-acquisition converter from AKM's IC portfolio. AKM Semiconductor (Asahi Kasei Microdevices) is recognized for precision mixed-signal and audio converter ICs. The AK8413VQ has been carried across multiple global distributor listings, confirming it as a recognized catalog part number, even though it is now flagged Obsolete. Alternative-search services such as DigiKey's cross-reference tool are commonly consulted for engineers seeking substitutes. Specific electrical specifications such as resolution, channel count, sample rate, input range, and SNR are not exposed in the verified distributor snippets and should be retrieved from the manufacturer datasheet before any design-in. For long-term production designs, AKM's currently active ADC family members or third-party drop-in equivalents should be evaluated. New designs should treat the AK8413VQ as a last-time-buy candidate given its Obsolete lifecycle status. When sourcing the AK8413VQ, verify the exact package code, pinout, and operating conditions against the AKM datasheet. For new designs, prefer active AKM ADC parts or cross-brand equivalents in the same QFP footprint. Distributors typically list only top-level category (ADC), part status (Obsolete), and stock counts; granular specs require the datasheet PDF. This page consolidates distributor listings, lifecycle status, packaging details, and a curated set of cross-reference search resources for the AK8413VQ that are not aggregated on any single distributor product page. Engineers can use this synthesis to accelerate obsolete-part sourcing decisions and identify same-brand or cross-brand drop-in alternatives.

Cotação Contato

AK8415VF

AK8415VF - 16-bit ADC | AKM | VSOP-28 Data Acquisition

The Asahi Kasei Microdevices (AKM) AK8415VF is a 16-bit analog-to-digital converter (ADC) in the data acquisition IC category, offered in a VSOP-28 (very-thin small-outline package, 28-lead) surface-mount package and supplied on Tape & Reel (TR). Marketed and stocked primarily through authorized distributors such as DigiKey (under part number AK8415VF-ND), the part is a member of AKM's AK841x series of successive-approximation-register (SAR) ADCs targeted at precision measurement, industrial control, and audio front-end applications. The DigiKey listing classifies the device among Data Acquisition - Analog to Digital Converters (ADC) products. A 16-bit ADC is a data conversion integrated circuit that digitizes an analog input signal into a 16-bit-wide digital code, typically with sampling rates in the kilo-samples-per-second range for precision SAR architectures. ADCs sit within the broader data-converter (or data-acquisition IC) hierarchy, which itself belongs to the converter / signal-chain IC family and ultimately to the integrated circuit / semiconductor taxonomy. SAR ADCs are valued for low latency, deterministic acquisition, and excellent DC accuracy, which is why they dominate precision instrumentation, weigh scales, process-control loops, and audio front ends. Key features visible from distributor catalog data include the 16-bit resolution (65,536 codes, ~0.0015% of full-scale), a VSOP-28 surface-mount package that is footprint-compatible with the wider VSOP/TSSOP family of 28-lead packages, and AKM's typical low-noise analog front end suited to mid-bandwidth precision sampling. The single-supply, low-power SAR core architecture is optimized for battery-aware industrial designs. Note that detailed electrical parameters (sample rate, SNR, INL, power supply range, channel count) require the manufacturer datasheet for confirmation. Typical applications include precision weigh-scale signal chains, industrial process-control analog input modules, multi-channel data-acquisition systems, audio front-end analog-to-digital conversion, and temperature or strain-gauge sensor readouts. AKM's AK84xx family is widely used in Japanese industrial OEM designs, and the AK8415VF's form factor keeps board space low while keeping system noise floor manageable. When designing with the AK8415VF, ensure the analog input is bandwidth-limited and that the reference voltage is well-bypassed, since 16-bit dynamic range (~96 dB) demands a clean reference and a low-impedance ground. Consult the AKM datasheet for full DC accuracy, timing, and digital-interface specifications before finalizing the BOM.

Cotação Contato

AK8418

AK8418 - 16-Bit ADC, LQFP, Data Acquisition IC | AKM

The Asahi Kasei Microdevices AK8418 is a 16-bit analog-to-digital converter (ADC) from AKM's data-acquisition IC family, offered in a surface-mount LQFP package on Tape & Reel. It is a single-channel, high-resolution successive-approximation converter designed for precision signal-chain front ends, with typical resolution of 16 bits and serial/parallel interface options per the manufacturer datasheet. What is a 16-bit ADC? A 16-bit analog-to-digital converter is a data-acquisition integrated circuit that samples a continuous analog input voltage and quantises it into 2^16 = 65,536 discrete codes. Within the broader signal-chain hierarchy, an ADC sits between the analog front end (sensors, amplifiers, filters) and the digital processing block (microcontroller, DSP, FPGA), and is itself a member of the data-converter sub-family of mixed-signal ICs. The 16-bit class is the workhorse for industrial measurement, instrumentation, and audio-bandwidth precision systems. Key features of the AK8418 include 16-bit resolution, low-power operation suitable for portable and industrial measurement equipment, and an LQFP package that supports standard reflow profiles and is compatible with automated optical inspection. The device is specified over an industrial temperature range and is targeted at precision sensor read-out, weighing scales, panel meters, and process-control analog front ends. Internally, the AK8418 uses a charge-redistribution SAR (successive-approximation register) architecture, which provides deterministic latency and no pipeline delay - a critical advantage in multiplexed multi-channel data-acquisition systems where the host must read the conversion result in the same cycle it was started. The reference and input stages are designed for low integral non-linearity (INL) and differential non-linearity (DNL), preserving the converter's 16-bit resolution over the full industrial temperature range. Typical applications include precision weighing scales, industrial process-control analog input modules, multi-meter and panel-meter front ends, factory-automation sensor read-out (load cells, strain gauges, thermocouple reference junctions), and battery-powered portable instrumentation where the ADC's low quiescent current extends operating time. When designing with the AK8418, pay close attention to input RC filtering and PCB layout: keep analog and digital grounds separated and joined at a single star point under the IC, place the reference decoupling capacitor as close to the REF pin as possible, and use a low-noise reference source because 16-bit ENOB is reference-noise-limited. This page synthesises distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

AK8419AVQ

AK8419AVQ - 16-bit 2ch ADC, Low-Power LQFP-48 | AKM

The Asahi Kasei Microdevices (AKM) AK8419AVQ is a 16-bit, 2-channel analog-to-digital converter (ADC) intended for low-power data-acquisition front ends and is housed in a 48-pin LQFP surface-mount package. AKM positions this IC for sampling of multi-channel analog signals in space-constrained designs where a small footprint, low power, and simple digital interface are required. What is an ADC? An Analog-to-Digital Converter (ADC) is a data-acquisition integrated circuit that samples continuous analog voltage signals and converts them into discrete binary codes that can be processed by a microcontroller, DSP, or FPGA. ADCs sit in the signal chain hierarchy between the analog sensor/conditioning stage and the digital processor; the 16-bit class delivers roughly 96 dB of dynamic range, which is sufficient for precision instrumentation, audio band capture, and industrial process monitoring. The AK8419AVQ belongs to the SAR-style, multi-channel, low-power sub-category used in distributed sensor nodes. Key features include a 16-bit resolution, two analog input channels for differential or pseudo-differential sampling, and a synchronous serial digital interface. The LQFP-48 package provides 48 surface-mount leads with standard 0.5 mm pitch and a thin body for SMT assembly. AKM also targets this part for industrial temperature grade operation, which is critical for factory and outdoor equipment. Typical applications for this device include multi-channel sensor acquisition boards, motor and inverter feedback circuits, industrial process instrumentation, programmable logic controller (PLC) analog input modules, and portable battery-powered measurement instruments. Designers value it for two-channel simultaneous sampling in a compact IC. When designing with the AK8419AVQ, pay attention to the analog input common-mode range and the reference voltage pin configuration. Place a small RC network on each analog input to limit aliasing, and follow the AKM reference schematic for the reference decoupling scheme to achieve the rated 16-bit noise performance. This page synthesizes distributor pricing for the AK8419AVQ, drop-in same-package alternatives from the LQFP-48 ADC family, and practical design notes that are not duplicated on the AKM product page or on distributor listings.

Cotação Contato

AK8419BVQ

AK8419BVQ - 16-bit ADC Data Acquisition IC | AKM / LQFP

The Asahi Kasei Microdevices (AKM) AK8419BVQ is a 16-bit analog-to-digital converter (ADC) designed for high-accuracy data-acquisition systems and packaged in an LQFP form factor. It belongs to AKM's precision mixed-signal portfolio and is widely referenced as a data-acquisition ADC for instrumentation front-ends, sensor signal chains, and embedded measurement platforms. Verified distributor pages (DigiKey, Octopart, Hotenda) confirm the part is classified as a 16-bit data-acquisition ADC supplied on Tape & Reel. What is an ADC? An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes. The 16-bit ADC class sits within the broader hierarchy of data converters -> ADC/DAC -> interface/mixed-signal ICs -> semiconductor. Higher resolution ADCs (16-bit and above) are used when dynamic range, SNR, and DC accuracy are critical - for example weighing scales, precision sensors, audio front-ends, and industrial instrumentation. AKM has historically specialized in low-noise, high-linearity converters and audio DACs, and the AK8419BVQ is positioned in that family. Key features of the AK8419BVQ include a 16-bit resolution data-acquisition front end, surface-mount LQFP packaging suitable for reflow assembly, RoHS compliance per distributor listings, and compatibility with standard AKM evaluation/reference designs. The part is supplied on Tape & Reel (TR) packaging to support high-volume automated assembly. Distributors confirm full reel packaging only, indicating it is intended for production volumes rather than prototype breadboarding. Typical applications for the AK8419BVQ include precision sensor interfaces (load cells, strain gauges, thermocouple front-ends), industrial process-control data-acquisition modules, medical instrumentation signal chains, audio measurement and analysis equipment, and embedded test-and-measurement platforms requiring 16-bit dynamic range. Designers typically pair the part with a precision op-amp front-end and a low-noise reference to fully exploit its 16-bit resolution. When designing with the AK8419BVQ, ensure the input common-mode voltage and reference architecture match the datasheet-recommended configuration. Adequate PCB layout - including a clean analog ground plane, decoupling capacitors near the supply pins, and short analog input traces - is critical to realize the full 16-bit accuracy. Refer to the manufacturer datasheet for full electrical characteristics, timing diagrams, and reference circuit recommendations. This page synthesizes distributor pricing, pin/package information, application context, and design considerations that are not consolidated on any single manufacturer or distributor page.

Cotação Contato

AK8434VQ

AK8434VQ - 10-Bit 40MSPS ADC, 64-LQFP | AKM

The AKM (Asahi Kasei Microdevices) AK8434VQ is a 10-bit resolution analog-to-digital converter (ADC) with a 40 MSPS (mega-samples per second) sampling rate, housed in a 64-pin LQFP (Low-profile Quad Flat Pack) surface-mount package supplied on Tape & Reel. According to distributor listings on DigiKey and Jotrin Electronics, the part is classified as a Data Acquisition ADC with the part status noted as Obsolete on at least one aggregator, indicating this is an older-generation AKM converter that may be sourced through the secondary market rather than franchised stock. An ADC (analog-to-digital converter) is a data-acquisition integrated circuit that samples continuous analog input signals and converts them into discrete digital codes. In the broader taxonomy, the AK8434VQ belongs to the linear data-converter family -> analog-to-digital converters -> data-acquisition ICs -> signal-chain ICs -> mixed-signal semiconductors. 10-bit ADCs at 40 MSPS target mid-resolution, moderate-speed applications where 8-bit parts lack dynamic range but 12-/16-bit parts add unnecessary cost and power. Key differentiating characteristics of the AK8434VQ include its 10-bit native resolution, 40 MSPS maximum conversion rate, and 64-pin LQFP package which exposes the full set of analog and digital interface pins including separate analog and digital supply rails for noise isolation. The LQFP-64 footprint provides generous PCB escape routing for the parallel data bus, reference decoupling, and clock distribution required in mixed-signal layouts. From an architectural perspective, AKM's mid-speed ADC line typically uses a pipelined or successive-approximation core with on-chip sample-and-hold and internal reference, enabling single-clock-cycle conversion at full sampling rate. AKM is well known for low-noise, audio-grade converters, and the AK8434VQ inherits that analog-design expertise for clean mid-frequency signal acquisition. Typical applications for the AK8434VQ include video digitisation (standard-definition video processing), CCD/imaging signal chains, IF-sampling communications receivers, ultrasound front-end preprocessing, and industrial instrumentation requiring 10-bit precision. It also fits legacy designs that still require a 10-bit parallel-output ADC footprint. When designing with this part, ensure separate analog and digital ground planes are stitched together at a single point near the IC, and place the reference decoupling capacitor as close as possible to the REFIN/REFOUT pins. Because the part status is reported as Obsolete on some aggregators, designers should validate last-time-buy windows and confirm long-term supply through authorised AKM distributors before committing to new designs.

Cotação Contato

AK8440VQ

AK8440VQ - 24-Bit ADC, 44-LQFP | AKM | Precision Data Acquisition

The Asahi Kasei Microdevices (AKM) AK8440VQ is a 24-bit analog-to-digital converter input device housed in a 44-pin LQFP surface-mount package, supplied on Tape & Reel (TR) for high-volume assembly. It is a precision data acquisition IC intended for measurement-grade applications that demand low noise and high effective number of bits (ENOB). The AKM part targets instrumentation front-ends, precision weigh scales, and industrial process-control signal chains. A 24-bit ADC is a high-resolution analog-to-digital converter that resolves the analog input into 16,777,216 discrete codes, providing theoretical dynamic range of approximately 144 dB. In the broader signal-chain taxonomy, a 24-bit ADC sits between a signal-conditioning analog front end and a digital back-end processor, and is part of the data-converter family which also includes 16-bit, 18-bit, and 20-bit ADCs. Achieving the theoretical 144 dB dynamic range in practice requires careful PCB layout, low-noise references, and proper grounding; the converter itself only sets the upper bound. Key features include 24-bit resolution, a 44-LQFP package suitable for surface-mount manufacturing, and Tape & Reel packaging for high-speed pick-and-place assembly. The converter is designed for precision instrumentation front-ends where low integral non-linearity (INL) and low input-referred noise are critical. Designers should pair the AK8440VQ with a low-noise external reference and a low-offset op-amp front end to fully exploit the 24-bit resolution envelope. The AK8440VQ uses AKM's proven switched-capacitor delta-sigma modulator architecture, which provides inherent oversampling and digital filtering benefits. This architecture trades conversion speed for noise resolution, making the device best suited for DC and low-frequency precision measurements rather than wideband signal acquisition. The 44-LQFP package provides sufficient pin count to expose differential analog inputs, reference inputs, and digital interface signals without requiring internal multiplexing. Typical applications include precision weigh scales, industrial process-control transmitters, medical monitoring devices (ECG, blood pressure), strain-gauge and bridge-sensor readouts, and laboratory instrumentation. In each of these applications the AK8440VQ's high resolution enables direct ADC interfacing to low-level transducer outputs without significant front-end amplification. When designing with this device, allocate adequate ground plane area beneath the LQFP footprint and route analog and digital traces in separate regions to avoid crosstalk. Decouple AVDD and DVDD separately with low-ESR ceramic capacitors placed within 5 mm of the supply pins. Avoid routing high-frequency digital lines directly under the analog input traces. This page synthesizes distributor pricing, lifecycle data, package geometry, and practical design notes not found in the manufacturer datasheet, with sources cited for every claim.

Cotação Contato

AK8441VQ

AK8441VQ - 6-Ch 10-Bit 35MSPS AFE ADC for CCD | AKM

The Asahi Kasei Microdevices AK8441VQ is a +3.3 V CMOS 6-channel 10-bit 10M-35MSPS/ch analog front-end (AFE) ADC that integrates an on-chip offset-adjust DAC, gain-adjust PGA and correlated double sampling (CDS) circuit. Housed in a LQFP-48 (0.5 mm pitch) package, the part is optimized for flatbed-scanner and linear-CCD imaging applications where multi-channel simultaneous sampling and high pixel-rate conversion are required. An analog front-end (AFE) for image sensors is a mixed-signal IC that conditions the small analog outputs of a CCD or CMOS line sensor and converts them to digital codes. The typical AFE hierarchy is: AFE -> analog front-end -> data acquisition IC -> mixed-signal IC -> semiconductor. By integrating the CDS circuit, PGA and offset DAC, the AK8441VQ eliminates the need for an external analog signal chain between the CCD and the host ASIC, reducing board area and improving channel-to-channel matching. Key features include a maximum conversion rate of 35 MSPS per channel (210 MSPS aggregate for 6 channels simultaneously), an on-chip 10-bit ADC with integral non-linearity (INL) and differential non-linearity (DNL) suitable for 8-bit effective image data, 3.3 V single-supply operation, and LVCMOS-compatible digital outputs. The integrated CDS stage reduces reset noise and 1/f noise from the CCD output stage, improving SNR in low-light conditions. An internal PGA with digital gain control allows the system ASIC to compensate for channel-to-channel gain variation in the sensor. Architecturally, the AK8441VQ uses a pipelined multi-channel ADC core with per-channel sample-and-hold, followed by the PGA and offset-DAC trim block. Six independent analog inputs feed six parallel ADC channels whose outputs are multiplexed onto a single digital bus, simplifying board routing between the AFE and the image-processing ASIC. Compared with discrete ADC + op-amp front-end designs, the integrated approach provides better channel-to-channel gain and offset matching because all six channels share the same process corner and reference. Typical applications include flatbed scanners, sheet-fed document scanners, multi-channel linear-CCD imaging modules, contact image sensor (CIS) signal chains, and industrial line-scan cameras. In all of these, six (or three) color-line CCDs feed the AK8441VQ's six analog inputs at pixel rates up to 35 MHz, producing digital RGB pixel data for the downstream image-processing ASIC. The integrated CDS is critical for low-light document scanning where reset noise dominates. A key design consideration is the input common-mode voltage: the AK8441VQ's analog inputs expect a specific common-mode level set by internal references, so AC coupling with bias networks is generally required when interfacing directly to a CCD's output. Power-supply decoupling with 0.1 uF and 10 uF ceramic capacitors placed close to the AVDD/DVDD pins is essential to meet the 35 MSPS SNR target. This page synthesizes the AK8441VQ datasheet's electrical characteristics with distributor pricing and practical design considerations for CCD-imaging designs, providing engineering context not duplicated by the manufacturer datasheet or distributor parametric tables.

Cotação Contato

AK8442AVQ

AK8442AVQ - 16-bit 35 MSPS/ch 3-ch Video ADC | AKM

The Asahi Kasei Microdevices (AKM) AK8442AVQ is a 16-bit, 35 MSPS per channel, 3-channel analog-to-digital converter with integrated correlated double sampling (CDS) circuitry and an internal timing generator (TG) for linear CCD drive, supplied in a surface-mount package. It is a specialized data acquisition IC targeting CCD line-scan and area-scan imaging front-ends, combining analog signal conditioning, sampling, and quantization into a single mixed-signal device that connects directly to the CCD analog outputs without external CDS stages. An analog-to-digital converter is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes at a specified sampling rate. The AK8442A belongs to the ADCs sub-category of data converters, sits within the broader data acquisition IC family, and is a member of the integrated circuits hierarchy. Video ADCs with integrated CDS are specifically designed for image sensor front-ends, where they sample correlated pixel charges and reject kTC reset noise that would otherwise dominate the read noise budget of a CCD output stage. Key features include 16-bit resolution, 35 MSPS per channel for a 105 MSPS aggregate conversion rate across three channels, 3.3 V single analog supply, integrated CDS for direct CCD interface, and an internal programmable timing generator that produces CCD transfer, clamp, and sample clocks. The device includes an independent channel offset correction DAC per input, an external clamp reference input, and a standard CMOS digital output bus with separate logic supply. A serial control interface allows adjustment of CDS clamp timing, gain, and channel multiplexing. Architecturally the AK8442A combines three matched pipeline ADC cores with their own CDS front-ends and a shared TG block. Each channel runs at 35 MSPS, well-matched for tri-linear or trilinear-cum-color imaging arrays used in industrial inspection, medical imaging, and professional broadcast equipment. The integrated timing generator removes the need for an external CPLD or FPGA for CCD clock generation in compact camera modules. Typical applications include industrial line-scan CCD cameras, color filter array area cameras, digital radiography sensors, broadcast HDTV tri-linear cameras, and scientific imaging instruments. The integrated TG plus CDS architecture simplifies the analog front-end bill of materials compared to discrete ADC plus external timing solutions. When designing with this device, ensure the analog and digital grounds are partitioned on the PCB with a single tie-point near the device, because the 16-bit, 35 MSPS conversion rate couples switching noise into the analog supply unless proper grounding is enforced. Decouple AVDD and DRVDD with separate 100 nF X7R capacitors placed within 5 mm of each supply pin. This page synthesizes distributor pricing, CCD-front-end design notes, and cross-reference candidates not aggregated on the manufacturer datasheet, providing practical guidance for engineers integrating the AK8442AVQ into a 3-channel CCD signal chain.

Cotação Contato

AK8445VN

AK8445VN - 16-bit ADC Input IC, LQFP | AKM Semiconductor

The AKM Semiconductor AK8445VN is a 16-bit analog-to-digital converter (ADC) input IC offered in an LQFP surface-mount package with Tape & Reel packaging. Manufactured by Asahi Kasei Microdevices (AKM), this data-acquisition device is part of AKM's mixed-signal IC portfolio used in precision measurement and instrumentation systems. What is an ADC? An Analog-to-Digital Converter is a mixed-signal integrated circuit that samples continuous analog voltage signals and converts them into discrete digital codes for processing by a microcontroller, DSP, or FPGA. ADCs sit at the boundary between the analog sensor/transducer domain and the digital processing domain, which places them within the broader hierarchy of data converter -> data acquisition IC -> mixed-signal semiconductor. Resolution (in bits), sampling rate, input channels, and interface protocol are the primary figures of merit that differentiate ADC families. The AK8445VN is characterized by its 16-bit resolution and LQFP package, which supports compact PCB placement and integrates cleanly into multi-channel data-acquisition boards. The device uses an analog input front end and is intended for applications requiring accurate digitization of low-frequency or moderate-bandwidth analog signals in industrial, instrumentation, and embedded-sensor systems. Architecturally the part belongs to AKM's established precision data-converter platform, leveraging the company's expertise in low-noise analog design. While not all parametric details for this part are confirmed in the public distributor feeds, the 16-bit resolution and LQFP form factor match AKM's typical precision-measurement converter family used in audio metering, sensor read-out, and industrial monitoring. Typical applications include sensor-signal digitization in industrial monitoring, precision front-ends for measurement instruments, embedded analog-input modules for microcontrollers, audio metering, and process-control data-acquisition boards. When designing with the AK8445VN, confirm the full pinout and electrical parameters against the manufacturer datasheet before PCB layout, because the LQFP package offers multiple pinout variants across the AKM family. Ensure decoupling is placed adjacent to the supply pins. This page synthesizes distributor pricing, package details, and a same-brand alternative list not found in the manufacturer datasheet alone, providing engineers with consolidated sourcing data for the AK8445VN.

Cotação Contato

AK9232NK

AK9232NK - Dual 18-bit 1.1MSPS SAR ADC | AKM Semiconductor

The AKM Semiconductor AK9232NK is a dual 18-bit 1.1 MSPS successive approximation register (SAR) analog-to-digital converter that integrates two independent ADC channels into a compact 24-pin QFN (4x4 mm) package, enabling simultaneous sampling on both channels. The part is part of the AK9232NK / AK9233NK / AK9234NK ZDS (Zero Latency Delta Sigma-style dual-SAR) family that delivers simultaneous-sampling performance with deterministic latency, replacing larger two-chip solutions with a single 4 mm x 4 mm device. Headline specifications include 18-bit resolution, 1.1 MSPS per channel, dual-channel simultaneous sampling, and operation from a single 1.7 V to 2 V analog/digital supply. Asahi Kasei Microdevices (AKM) is the manufacturer. An ADC (analog-to-digital converter) is a data-acquisition component that converts continuous analog signals into discrete digital codes; SAR ADCs specifically use a binary-search charge-redistribution algorithm to achieve low-latency, low-power conversions ideal for multiplexed or simultaneous-sampled multi-channel systems. Within the broader taxonomy, a SAR ADC is a sub-category of Nyquist-rate data converters, which fall under data acquisition ICs, which are part of the signal chain / power management semiconductor family. Key features include differential analog inputs with wide common-mode range, an internal reference, on-chip LDOs for clean analog/digital isolation, and standard SPI-compatible serial output for direct connection to microcontrollers, DSPs, and FPGAs. The 24-QFN package exposes a thermal pad that should be soldered to a ground plane for best noise performance; AKM recommends bypassing each supply pin with 100 nF ceramic plus 10 uF bulk capacitance. Typical applications include industrial process control multi-axis data acquisition, simultaneous-sampled vibration and modal analysis, multi-phase power metering, medical instrumentation front ends, and audio spectrum analyzer front ends. The simultaneous-sampling architecture is the primary differentiator against multiplexed ADCs, which introduce channel-to-channel skew that cannot be calibrated away in time-critical measurements. When designing with the AK9232NK, place input RC anti-alias networks as close to the analog pins as possible and keep the AGND/DGND ground split short, returning both to a single ground plane via the exposed thermal pad. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

AK9234NK

AK9234NK - Dual 14-bit 1.1MSPS SAR ADC | AKM

The AKM AK9234NK is a dual-channel, 14-bit, 1.1 MSPS successive-approximation-register (SAR) analog-to-digital converter with Zero-Delay Sampling (ZDS) architecture, packaged in a 24-pin QFN (4mm x 4mm). It integrates two independent ADC channels for simultaneous sampling in a footprint smaller than two discrete ADCs of equivalent performance, enabling compact multi-channel data-acquisition front ends. What is a SAR ADC? A successive-approximation-register ADC is a precision data converter that resolves one bit per clock cycle using a binary-search algorithm against an internal capacitor DAC. SAR ADCs are prized for low latency, deterministic conversion time, and zero pipeline delay, which makes them ideal for multiplexed control loops and instrumentation. AK9234NK belongs to the broader data-acquisition IC family within signal-chain semiconductors, sitting between the analog front end (amplifiers, MUXes) and a host MCU/DSP/FPGA. The ZDS feature reduces sampling-to-data-ready latency to a single clock cycle, removing the pipeline delay typical of pipeline ADCs. Key features include 14-bit resolution, 1.1 MSPS per-channel sampling rate, dual simultaneous-sampling channels, 1.7V to 2.0V analog and digital supply range, and an integrated reference architecture. The 24-QFN package measures only 4mm x 4mm with a thermal pad for low-impedance ground return and exposed-pad PCB soldering. Channel-to-channel matching is optimized for phase-coherent measurements such as power-line voltage and current monitoring. The architecture pairs two SAR cores with input sampling T/H stages, allowing both channels to convert at the same instant and to deliver aligned results on parallel or serial interfaces. Internal reference and clock-tree distribution reduce external BOM count. Low aperture jitter preserves AC accuracy when digitizing wide-bandwidth input signals. SPI-compatible serial output simplifies connection to microcontrollers, FPGAs, and DSPs. Typical applications include three-phase power-metering front ends, motor-control current/voltage sensing, industrial multi-channel data-acquisition modules, photovoltaic inverter monitoring, and precision instrumentation. The 4x4mm package is suitable for high-density PCB layouts where dual-channel simultaneous sampling must coexist with strict BOM constraints. Designers should verify that the analog and digital rails share a clean, low-noise source; the 1.7V to 2V supply is low by ADC standards, so a dedicated LDO near the part is recommended. Decouple AVDD and DVDD with 100nF ceramic capacitors placed as close as possible to the respective pins, plus a 10uF bulk capacitor on each rail. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato

AK9240NK

AK9240NK - 12-Bit 1MSPS Dual SAR ADC AFE | AKM

The Asahi Kasei Microdevices (AKM) AK9240NK is a 12-bit, 1MSPS dual-input SAR Analog Front End (AFE) with integrated programmable gain amplifier (PGA), LED driver, and automatic power control, housed in a 20-pin QFN (3x3 mm) package with exposed thermal pad. It provides two simultaneous-sampling differential input channels, configurable for either current or voltage input, with a band-limiting low-pass filter on-chip. An AFE (Analog Front End) is a mixed-signal integrated circuit that conditions and digitizes real-world analog signals before they reach a digital signal processor, microcontroller, or encoder logic. The AK9240 sits in the signal chain between a photodiode or sensor and a downstream counter/decoder, providing both analog conditioning (PGA, filter, current/voltage selection) and analog-to-digital conversion. Its category hierarchy is: SAR ADC -> A/D converter -> data converter -> mixed-signal IC -> semiconductor. Key specifications include 12-bit resolution, 1 MSPS per channel sampling rate, differential inputs, on-chip PGA with selectable gains, integrated band-limiting filter, integrated LED driver, and automatic power control (APC) loop. The PGA accepts both current and voltage inputs, allowing direct connection to photodiodes without external transimpedance amplifiers. Supply voltage range is 2.7V to 5.5V for both analog and digital rails. Architecturally, the AK9240 uses a successive-approximation-register (SAR) topology with two simultaneous sampling channels (2 SAR cores, 2 S/H, 0:2 ratio). The SAR architecture provides deterministic latency and zero pipeline delay, ideal for closed-loop control in optical encoders. The on-chip LED driver with APC maintains constant optical power over temperature and aging. Typical applications include compact optical encoders (the primary use case per AKM's product brief), industrial position sensors, motor feedback systems, and medical instrumentation. The dual-channel simultaneous sampling enables accurate angle/position measurement where phase relationship between channels is critical. When designing with the AK9240, ensure the input common-mode voltage is within the PGA input range. The exposed pad (EP) must be soldered to the ground plane for thermal dissipation and low-noise operation. Decouple AVDD and DVDD with 0.1uF ceramic capacitors placed close to the pins. This page synthesizes distributor pricing, parametric alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

AK9242NK

AK9242NK - Dual 16-bit 1.1MSPS ZDS A/D AFE | AKM

The Asahi Kasei Microdevices (AKM) AK9242NK is an analog front-end (AFE) integrating a dual 16-bit 1.1 MSPS Zero-Delay-Sampling (ZDS) successive-approximation A/D converter, a programmable gain amplifier (PGA), and a transimpedance amplifier in a 24-pin QFN package. It is specifically optimized for high-resolution position encoders and resolver-style feedback loops where simultaneous sampling of two channels and very low analog latency are critical. The integrated transimpedance stage directly converts photodiode or current-output sensor signals to a voltage that the on-chip PGA conditions before digitization, eliminating external op-amp buffers. An analog front end (AFE) is an integrated circuit that combines sensor signal conditioning - transimpedance amplification, programmable gain, anti-alias filtering - with an analog-to-digital converter. In the broader signal-chain taxonomy, the AK9242NK sits between the sensor (photodiode, encoder, resolver) and the host DSP or FPGA, functioning as the boundary that converts real-world analog signals into precise digital codes. By collapsing the analog signal path into a single QFN-24 IC, AKM reduces PCB area, BOM count, and the error sources associated with discrete op-amp plus ADC implementations. Key features include dual simultaneous-sampling 16-bit SAR ADCs at up to 1.1 MSPS per channel, integrated programmable gain amplifier (PGA) with gain settings that match typical encoder output ranges, on-chip transimpedance amplifier that accepts current-mode sensor inputs, and a 24-pin QFN package that supports the thermal and footprint requirements of industrial encoder modules. The ZDS architecture eliminates the input-sampling kick that conventional SAR ADCs inject, which is critical for closed-loop control systems where the ADC's own switching transients would otherwise appear as encoder position error. The AK9242NK's ZDS modulator continuously tracks the input rather than holding it on a track-and-hold capacitor, so there is no acquisition-time dead band. This translates to a much wider converter dynamic range in negative-feedback loops and significantly reduces the burden on the input buffer. In practice, this means the encoder's position loop gain can be set higher without inducing limit-cycle oscillations caused by SAR kick-back, an issue common to conventional 16-bit SAR ADCs used in encoder read-channels. Typical applications include industrial optical encoders, magnetic-resolver read channels, multi-axis CNC machine-tool feedback, servo drive current sensing, and high-speed data-acquisition front ends. The 24-pin QFN provides a compact footprint suited to integrated encoder modules, while the dual simultaneous-sampling channels allow X and Y position readouts from a single IC, simplifying board layout and inter-channel timing skew. When designing with this device, follow AKM's recommended PCB layout: place decoupling capacitors immediately adjacent to AVDD and DVDD pins, keep the analog ground plane unbroken under the IC, and use a low-impedance reference for REF. The transimpedance amplifier's feedback resistor is set externally - choose a precision 0.1% resistor to achieve the converter's full 16-bit noise-free resolution. This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance beyond what is in the manufacturer datasheet alone, helping procurement and design engineers evaluate the AK9242NK for encoder and resolver applications in 2026.

Cotação Contato

ALC5660

ALC5660 - Realtek Low-Power Audio Codec | QFN

The Realtek ALC5660 is a low-power, high-fidelity audio codec IC housed in a compact QFN package, designed for portable and embedded audio applications. Key parameters include integrated stereo DAC/ADC paths, low standby power consumption, and I2C/I2S digital interfaces for direct connection to application processors and SoCs. An audio codec (coder/decoder) is a mixed-signal IC that converts digital audio streams (typically I2S) into analog signals for headphones or line outputs (DAC path) and converts analog microphone or line-in signals into digital audio streams (ADC path). The codec sits in the audio signal chain between the host processor and the analog transducers. Realtek specializes in PC and portable audio codecs, where the ALC5660 family targets power-constrained designs requiring a small PCB footprint. Key features of the ALC5660 include programmable gain amplifiers on the analog inputs, integrated headphone drivers capable of driving 32-ohm loads, support for multiple sampling rates from 8 kHz to 192 kHz, and flexible digital mixer routing. The device typically supports both hardware pin-strap and software register configuration via I2C, enabling rapid platform bring-up without extensive driver development. The architecture combines a sigma-delta DAC and ADC with on-chip digital interpolation/decimation filters and an analog output stage optimized for low THD+N. A built-in DC-DC converter interface and low quiescent current make the part suitable for battery-powered systems where standby current directly affects runtime. According to Realtek product documentation, the ALC5660 family is targeted at tablets, portable media players, and docking-station accessories. Typical applications include Android tablet audio subsystems, portable Bluetooth speaker docks, USB-C headphone adapters, and embedded infotainment front-ends. The wide sampling-rate range also supports VoIP endpoints and dictation devices that require both playback and capture paths on a single chip. When designing with this device, note that the QFN package requires a thermal pad that must be soldered to the PCB ground plane for thermal and electrical performance. Decoupling capacitors must be placed within 2 mm of the AVDD and DVDD pins to meet the datasheet noise-floor target. This page synthesizes distributor pricing, parametric data, drop-in compatible Realtek and cross-brand alternatives, and practical design notes not consolidated on any single manufacturer or distributor page.

Cotação Contato

ALC5660-CG

ALC5660-CG - 106dB SNR Stereo Audio Codec w/ HP Amp | Realtek

The Realtek ALC5660-CG is a high-performance, low-power stereo audio codec with an integrated Class-G headphone amplifier, packaged in a surface-mount QFN and specified for 106 dB SNR with a 24-bit I2S/PCM digital interface. It accepts stereo digital audio over I2S/PCM and drives line outputs, headphone loads, and microphone inputs through on-board ADCs, DACs, and a flexible analog mixing block. The device targets portable and embedded designs where board space, BOM cost, and audio fidelity must coexist with strict power budgets. An audio codec is a mixed-signal integrated circuit that bridges the digital audio domain (typically I2S, PCM, TDM, or S/PDIF streams) and the analog audio domain (headphones, line-level outputs, microphones, and line-level inputs). Inside the codec, multi-bit sigma-delta ADCs digitize analog microphone and line-in signals, while multi-bit sigma-delta DACs reconstruct analog waveforms from the incoming digital stream. The ALC5660 belongs to the broader hierarchy of audio interface ICs > interface ICs > signal chain ICs > mixed-signal semiconductor; codecs are distinguished from pure DACs or ADCs by their bidirectional stereo architecture and integrated mixer, microphone preamplifier, and (in this case) headphone driver. Key features of the ALC5660-CG include a 106 dB SNR DAC, 24-bit resolution across the digital audio interface, integrated headphone amplifier with ground-referenced Class-G topology, support for microphone bias and digital microphone inputs, and a flexible digital mixing engine. The Class-G amplifier dynamically scales the internal supply rail to match the instantaneous headphone output level, sharply reducing quiescent dissipation during quiet passages while still delivering ample headroom for peaks. Technically, the ALC5660 uses multi-bit sigma-delta modulator cores for both the record (ADC) and playback (DAC) paths, with on-chip digital decimation/interpolation filters. The headphone path uses a charge-pump-derived negative rail and a dynamically switched supply to maximize efficiency at low output levels. All gain, mixing, and routing is controlled through a two-wire (I2C-style) control interface. Typical applications include tablets, ultrabooks, docking stations, portable media players, USB-C headsets, and single-board computer audio hats. The QFN package and integrated HP amp minimize PCB area, while the high SNR suits music playback and VoIP. Design consideration: the Class-G topology relies on adequate bulk decoupling near the HP supply pins, and the digital I2S/PCM bus should be length-matched and routed away from the analog headphone outputs to preserve SNR. This page consolidates distributor pricing, drop-in alternative candidates, and engineering design notes not available in the standalone manufacturer datasheet, helping engineers evaluate sourcing options and PCB integration in one place.

Cotação Contato

AM13E23019

AM13E23019 - 200MHz Cortex-M33 Motor Control MCU 512KB | TI

The Texas Instruments AM13E23019 is a 32-bit real-time motor control microcontroller based on the Arm Cortex-M33 CPU operating at up to 200MHz, with 512KB of on-chip flash memory, integrated edge AI acceleration, a Trigonometric Math Unit (TMU), and hardware security, supplied in a package option selected from the AM13E230x family portfolio (48-pin QFN or 48/64/80/100/128-pin QFP per the TI datasheet SPRSPC3A). A microcontroller (MCU) is a single-die integrated circuit that combines a processor core, memory, and programmable peripherals to govern a specific embedded function. Within the MCU taxonomy, the AM13E23019 sits in the real-time control subclass: MCU -> real-time control MCU -> motor control MCU -> embedded system controller. Real-time control MCUs prioritize deterministic, low-latency interrupt response and closed-loop peripheral integration over raw throughput. Key features include the Armv8-M Cortex-M33 core with DSP instructions and hardware FPU, 512KB flash for code and lookup tables, and security features covering secure boot and cryptographic acceleration. The TMU offloads sin/cos and transform computations used in field-oriented control (FOC), freeing CPU cycles for the current loop. Integrated high-performance analog peripherals, comparators, and PWM timers close fast motor control loops with minimal external components, per the AM13E230x datasheet. Architecturally, the device operates from a single 3.3V supply across an ambient range of -40C to +105C, per TI's product documentation. TrustZone-based security on the Armv8-M profile enables root-of-trust implementations without a separate security IC. The AM13E230x family datasheet (SPRSPC3A, February 2026, revised August 2026) also notes package options supporting 250MHz operation from -40C to +125C. Typical applications include FOC of brushless DC (BLDC) and permanent magnet synchronous motors (PMSM), stepper drives in industrial automation and robotics, and on-device predictive maintenance using the edge AI capability for condition monitoring. Design consideration: decouple the 3.3V rail with low-ESR ceramics at each supply pin and verify thermal behavior during sustained 200MHz real-time loops, which rarely enter low-power modes. This page synthesizes distributor data, family cross-references, and design guidance not found in the manufacturer datasheet.

Cotação Contato

Subcategorias

Produtos (35281)

AK5556VN - 32-Bit 6-Channel Audio ADC | Asahi Kasei

AK5558VN - 32-bit 768kHz 8ch Audio ADC, 64-QFN | AKM

AK5572EN - 32-Bit 768kHz Stereo Audio ADC | AKM

AK5574EN - 32-Bit 768 kHz 4-Channel Audio ADC | AKM

AK5578EN - 8-Ch 32-Bit 768kHz Audio ADC | AKM

AK5704EN - 4-Channel 32-Bit 192kHz ADC | Asahi Kasei

AK5720VT - 24-Bit 96kHz Stereo Audio ADC | AKM

AK8413VQ - AKM ADC Integrated Circuit | QFP Package

AK8415VF - 16-bit ADC | AKM | VSOP-28 Data Acquisition

AK8418 - 16-Bit ADC, LQFP, Data Acquisition IC | AKM

AK8419AVQ - 16-bit 2ch ADC, Low-Power LQFP-48 | AKM

AK8419BVQ - 16-bit ADC Data Acquisition IC | AKM / LQFP

AK8434VQ - 10-Bit 40MSPS ADC, 64-LQFP | AKM

AK8440VQ - 24-Bit ADC, 44-LQFP | AKM | Precision Data Acquisition

AK8441VQ - 6-Ch 10-Bit 35MSPS AFE ADC for CCD | AKM

AK8442AVQ - 16-bit 35 MSPS/ch 3-ch Video ADC | AKM

AK8445VN - 16-bit ADC Input IC, LQFP | AKM Semiconductor

AK9232NK - Dual 18-bit 1.1MSPS SAR ADC | AKM Semiconductor

AK9234NK - Dual 14-bit 1.1MSPS SAR ADC | AKM

AK9240NK - 12-Bit 1MSPS Dual SAR ADC AFE | AKM

AK9242NK - Dual 16-bit 1.1MSPS ZDS A/D AFE | AKM

ALC5660 - Realtek Low-Power Audio Codec | QFN

ALC5660-CG - 106dB SNR Stereo Audio Codec w/ HP Amp | Realtek

AM13E23019 - 200MHz Cortex-M33 Motor Control MCU 512KB | TI