Circuitos Integrados

Subcategorias

📁 ADC/DAC 3.100+ produtos 📁 CIs Amplificadores 1.700+ produtos 📁 Codecs de Áudio 18 produtos 📁 CIs de Áudio 2 produtos 📁 Relógio e Temporização 640+ produtos 📁 Comparator ICs 1 produtos 📁 DSP 1.100+ produtos 📁 CIs de Aquisição de Dados 2 produtos 📁 Potenciômetros Digitais 4 produtos 📁 Drivers e Controladores de Display 1 produtos 📁 FPGA & CPLD 7.100+ produtos 📁 CIs de Interface 3.100+ produtos 📁 Drivers de LED 1 produtos 📁 CIs Lógicos 450+ produtos 📁 CIs de Memória 870+ produtos 📁 Microcontroladores 20.000+ produtos 📁 Microprocessadores 4 produtos 📁 Drivers de Motor 1 produtos 📁 Outros 1 produtos 📁 Sensor and Detector Interfaces 1 produtos 📁 CIs Especializados 15 produtos 📁 CIs de Vídeo 13 produtos

Produtos (38.000+)

VSC8501XML - Single-Port Gigabit Ethernet PHY | Microchip
VSC8501XML

VSC8501XML - Single-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8501XML is a single-port Ethernet physical-layer transceiver for 10/100/1000BASE-T networks, supplied in a 135-pin QFN package measuring 12 mm by 12 mm. It supports space-constrained Gigabit Ethernet equipment and incorporates line-side termination to conserve board area, reduce EMI, and improve system performance. The device also provides integrated RGMII timing compensation, allowing designers to reduce external timing-adjustment circuitry and simplify PCB implementation. An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into electrical signaling for transmission over twisted-pair cable and converts received signaling back into digital data. In the broader component hierarchy, the VSC8501XML is an Ethernet interface IC, a networking semiconductor, and a physical-layer device within an Ethernet communications system. It connects a network processor, switching silicon, industrial controller, or embedded system to an RJ45-based copper network through suitable magnetic-interface components. The principal features confirmed for the VSC8501XML include support for 10/100/1000BASE-T operation, one Ethernet port, integrated line-side termination, integrated RGMII timing compensation, surface-mount construction, and a 135-QFN 12 mm by 12 mm package. The integrated termination is especially useful where PCB area is constrained because it removes the need for a discrete termination network on the line side. Lower board-area requirements can simplify placement around magnetics and connectors, although the Ethernet magnetics, connector, passive network, and controlled-impedance layout remain essential to signal integrity. VSC8501XML belongs to Microchip's VSC8501 family and is identified by the XML ordering suffix. The 135-pin package exposes the digital host interface, analog line-side connections, power supplies, control pins, reference components, and configuration or test functions required by the PHY. Because the device supports multiple Ethernet rates, designers can use one physical-layer solution for 10 Mb/s, 100 Mb/s, and 1 Gb/s copper links when the surrounding magnetics and network implementation support the required media. Exact voltage ratings, temperature limits, clock requirements, register behavior, and performance metrics must be confirmed in the manufacturer datasheet before schematic capture. Typical applications include industrial Ethernet gateways, programmable logic controllers, factory automation equipment, network interface cards, embedded Linux systems, IP cameras, access-control terminals, and compact communications appliances. The single-port architecture is particularly suitable for equipment with one copper Ethernet connection. In these systems, the VSC8501XML can sit between an Ethernet-capable processor and a network transformer, while software configuration controls speed negotiation, autonegotiation, and operating behavior. When laying out the board, preserve the differential geometry required by the Ethernet line-side pairs and keep high-speed traces short and continuously referenced to a solid ground plane. Follow the pin-description table, recommended external-network diagram, and decoupling guidance in the Microchip VSC8501 datasheet. Confirm the exposed-pad connection, power-plane arrangement, magnetic-component selection, and resistor-network values against the exact XML suffix before releasing production artwork. This product page consolidates the verified package and technology facts, drop-in-family cross-reference results, application guidance, and PCB considerations into a focused engineering reference. It also separates confirmed characteristics from parameters that require review of the official manufacturer documentation, helping designers evaluate the VSC8501XML before committing to a high-speed Ethernet design.

Cotação Contato
VSC8502RD - 2-Port Gigabit Ethernet PHY | Microchip Technology
VSC8502RD

VSC8502RD - 2-Port Gigabit Ethernet PHY | Microchip Technology

The Microchip Technology VSC8502RD is a two-port Gigabit Ethernet copper PHY designed for space-constrained 10/100/1000BASE-T Ethernet designs. It combines integrated line-side termination with a reduced external-component approach intended to conserve board area, lower electromagnetic interference, and simplify system implementation. The verified manufacturer and distributor results identify the device as a two-port Gigabit Ethernet PHY with GMII/RGMII support, while the supplied package-specific MPN is VSC8502RD. A copper Ethernet PHY is the physical-layer interface between a digital Ethernet controller or processor and a twisted-pair network cable. It performs signal encoding, decoding, clock and data recovery, and electrical termination needed for reliable data transmission. The VSC8502 therefore belongs to the Ethernet interface controller and physical-layer device hierarchy, where it sits between a MAC or switching engine and the network magnetics or transformer-coupled cable interface. Its integrated line-side termination is particularly relevant to compact consumer, industrial, and embedded networking equipment. The supplied manufacturer information highlights integrated line-side termination as a board-space and EMI benefit. For 10/100/1000BASE-T applications, the two-port arrangement can reduce the number of separate PHY devices required by a dual-port network design. GMII and RGMII provide selectable digital interfaces for systems using either parallel or reduced-pin serial connections, allowing the PHY to fit different host architectures. The supplied data does not specify the exact package dimensions, pin count, electrical limits, operating-temperature range, or power consumption, so those values are not inferred here. Typical uses include compact Ethernet switches, industrial control equipment, embedded gateways, set-top equipment, and other designs requiring two copper-network ports. System designers should verify the exact VSC8502RD package, reference schematic, magnetic component, media interface, clocking, and host-side signal requirements against the Microchip documentation before layout release. The VSC8502RD-VR entry shown in the supplied distributor cross-reference data should likewise be checked against the target ordering code and mechanical drawing rather than assumed to be interchangeable. This product page consolidates the verified manufacturer description, distributor availability references, the VSC8502RD ordering entry, and the supplied VSC8502RD-VR cross-reference result. It also distinguishes confirmed application-level facts from electrical and mechanical details that require the manufacturer datasheet for final design decisions.

Cotação Contato
VSC8514EV - Quad-Port Gigabit Ethernet PHY | Microchip
VSC8514EV

VSC8514EV - Quad-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8514EV is a quad-port Gigabit Ethernet physical-layer transceiver with copper media interfaces, Synchronous Ethernet support, and a QSGMII MAC interface. It is designed for energy-efficient broadband gateways, data centers, enterprise networks, TDM backhaul equipment, wireless base stations, and other carrier-grade applications. The verified product material identifies two recovery-clock outputs, low-power operation, an integrated four-channel two-wire serial multiplexer for controlling Power over Ethernet modules, low-EMI line drivers, and integrated line-side termination resistors. A Gigabit Ethernet PHY is a physical-layer transceiver within the Ethernet interface hierarchy. It converts logical data transmitted by a MAC or switching fabric into electrical signaling suitable for copper cables, while providing receive and clock-recovery functions in the opposite direction. The VSC8514EV consolidates four copper Gigabit Ethernet ports into one device, reducing component count and simplifying multi-port equipment architectures compared with four unrelated PHY implementations. The principal verified features include four 10/100/1000BASE-T copper ports, low-power operation, Synchronous Ethernet, a QSGMII MAC connection, and two recovery-clock outputs. Its integrated two-wire serial multiplexer supports control of PoE modules. Low-EMI line drivers and integrated line-side termination resistors can simplify board design and reduce external component count, although the manufacturer datasheet and evaluation-board documentation should be consulted for exact implementation details and layout constraints. The device is positioned for infrastructure rather than isolated endpoint use. A single quad-port PHY can serve aggregation ports in a broadband gateway, server-rack networking equipment, enterprise access hardware, wireless base-station backhaul, and carrier transport systems. QSGMII provides a high-speed parallel interface between the PHY and a switching or aggregation device, while Synchronous Ethernet supports timing-oriented network architectures. Designers must account for the physical-layer requirements of the complete four-port system, including magnetics or copper interface implementation, termination, clocking, power delivery, thermal performance, and signal-integrity control. The verified evaluation schematic identifies VDD25A and VDD1A supply domains and shows six 0.1 uF capacitors associated with the VDD25A pins. Those values should be treated as evaluation-board implementation details rather than universal recommendations. VSC8514EV selection should begin with the four-port copper Ethernet requirement, QSGMII compatibility, Synchronous Ethernet support, PoE-module-control needs, and the manufacturer reference design. This page separates sourced product facts from unspecified details and avoids presenting unsupported electrical, package, temperature, or pricing values as verified specifications.

Cotação Contato
VSC8531XMW - Single-Port GbE Cu PHY | Microchip Technology
VSC8531XMW

VSC8531XMW - Single-Port GbE Cu PHY | Microchip Technology

The Microchip Technology VSC8531XMW is a low-power, single-port Gigabit Ethernet copper PHY with parallel RGMII and RMII MAC interfaces, designed for space-constrained 10/100/1000BASE-T equipment. It is housed in a 48-QFN package measuring 6 mm by 6 mm. The device supports both Gigabit and Fast Ethernet copper links while providing integrated line-side termination to reduce board area, external component count, and electromagnetic interference. An Ethernet physical layer transceiver converts digital MAC data into electrical signals for transmission over twisted-pair cabling, and reverses that process on the receive side. The VSC8531 belongs to the Ethernet PHY hierarchy, connecting a host processor or network controller through RGMII or RMII to a 10/100/1000BASE-T network interface. Its compact package and integrated termination suit access points, industrial gateways, switches, embedded controllers, and compact communication equipment. Key features include a single 10/100/1000BASE-T port, RGMII version 2.0 timing-compensation support, and configurable drive strength on the MAC interface. The RGMII compensation function removes the need for external on-board delay lines, simplifying high-speed layout. FindIC lists device supply levels of 0.95 V and 2.38 V for the VSC8531XMW configuration, while Microchip describes the part as a low-power PHY for 10/100/1000BASE-T applications. The PHY architecture integrates line-side termination directly into the package. This approach conserves board space, reduces component count, and can improve signal integrity by keeping the termination close to the copper magnetics. A single-row 48-QFN package also supports compact layouts, although the exposed pad requires careful thermal-via placement to transfer heat from the device. Typical uses include industrial Ethernet gateways, compact network switches, wireless access-point equipment, set-top boxes, embedded platforms, and telecom access hardware. The RMII option is useful with controllers using a reduced parallel interface, while RGMII supports higher-throughput Gigabit designs and includes on-die timing compensation that can simplify source-synchronous routing. For a robust layout, place the PHY close to the RJ45 connector and transformer, keep the line-side differential pairs short and matched, and provide a low-impedance ground plane around the exposed pad. Use the pin-description table and reference layout in the manufacturer datasheet when assigning nets and checking decoupling. This page combines package details, interface capabilities, application guidance, verified drop-in ordering options, and practical PCB considerations. It is intended to help engineers identify the correct VSC8531 configuration and plan a compact, EMI-conscious Gigabit Ethernet front end.

Cotação Contato
VSC8531XMW-02 - GbE Cu PHY RGMII/RMII | Microchip 48-QFN
VSC8531XMW-02

VSC8531XMW-02 - GbE Cu PHY RGMII/RMII | Microchip 48-QFN

The Microchip VSC8531XMW-02 is a single-port Gigabit Ethernet copper PHY transceiver supporting RGMII and RMII MAC interfaces, housed in a 48-pin QFN (6x6 mm) package with RGMII/RMII MAC connectivity for 10/100/1000BASE-T applications. It integrates a low-power architecture, hardware-configurable modes of operation via sampled pin states on reset, and Microchip's EcoEthernet v2.0 technology with IEEE 802.3az Energy-Efficient Ethernet (EEE) support. The device is qualified for industrial-grade operation and targets space-constrained embedded Ethernet designs. A Gigabit Ethernet PHY (Physical Layer transceiver) is the analog/digital mixed-signal IC that connects a Media Access Controller (MAC) to a copper twisted-pair cable. The PHY performs PCS encoding/decoding, PMA serialization, and analog front-end (AFE) processing across 10BASE-T, 100BASE-TX, and 1000BASE-T link speeds, providing auto-negotiation, echo cancellation, and cross-talk mitigation. Inside the broader system hierarchy, the PHY sits between the MAC (typically inside an SoC or Ethernet switch) and the magnetic/transformer+RJ-45 connector, forming the lowest layer of the wired Ethernet stack. Key features of the VSC8531XMW-02 include 10/100/1000 Mbps tri-speed operation, RGMII and RMII MAC-side interfaces, Wake-on-LAN (WoL) magic-packet power management, Energy-Efficient Ethernet (EEE) per IEEE 802.3az, and Microsemi EcoEthernet v2.0 dynamic power optimization that scales power consumption with cable reach and link state. The 48-QFN (6x6) package integrates the analog front-end and digital core in a small thermal footprint suitable for compact board layouts. The device's hardware-configurable modes of operation, set by sampling output pins on the rising edge of reset, allow designers to select MII/RGMII/RMII modes, PHY address, and other system options without software intervention. Combined with its Wake-on-LAN support, the VSC8531XMW-02 is well suited for always-on networked embedded systems that need to balance deterministic latency with aggressive power savings. Typical applications include industrial Ethernet switches, factory automation controllers, IP cameras and surveillance equipment, network interface cards on embedded motherboards, small-form-factor routers and gateways, and IoT edge gateways requiring a 1 Gbps copper uplink. Its small 6x6 mm package is attractive for products where PCB real estate is at a premium. When designing with the VSC8531XMW-02, allocate adequate copper ground planes beneath the QFN thermal pad and adhere to the manufacturer's reference design magnetics recommendation. Ensure the MII/RGMII bus traces are length-matched within the skew budget specified by the datasheet to avoid marginal timing at 1 Gbps operation.

Cotação Contato
VSC8531XMW-05 - 1-Port GbE Cu PHY, RGMII/RMII, 48-QFN | Microchip
VSC8531XMW-05

VSC8531XMW-05 - 1-Port GbE Cu PHY, RGMII/RMII, 48-QFN | Microchip

The Microchip VSC8531XMW-05 is a single-port Gigabit Ethernet copper PHY transceiver with RGMII/RMII MAC interface, housed in a 48-pin QFN (6 mm x 6 mm) package. Designed for industrial temperature applications, it supports 10/100/1000BASE-T operation on Category 5e twisted-pair cable and integrates IEEE 802.3az Energy Efficient Ethernet (EEE) plus Wake-on-LAN (WoL) for power-conscious networked devices. The device operates from a single 3.3 V supply with on-chip 1.0 V/1.2 V LDO regulators for its analog and digital cores. What is an Ethernet PHY? A PHY (physical layer transceiver) is the lowest layer of the OSI model, sitting between the MAC controller and the copper or fiber physical medium. Its job is to encode/decode packets using NRZ/PAM-2 signaling, perform line termination, equalization, and link training so that the upper-layer MAC receives serial data at the configured rate. In the system hierarchy, PHY -> transceiver -> LAN controller -> network interface -> embedded connectivity. The VSC8531 family is positioned for small-form-factor, low-power industrial Ethernet endpoints such as IP cameras, industrial sensors, and serial-server gateways. Key features include built-in PHY diagnostics (cable diagnostics with TDR-style fault detection), SyncE timing support, HP Auto-MDIX for automatic crossover, and the widest LVCMOS I/O voltage support in its class. Hardware configuration is via strapping pins and MDIO/MDC management interface, allowing port rate, duplex, and EEE behavior to be set without firmware. The 48-QFN package exposes a dedicated reference-clock input for Synchronous Ethernet (SyncE) applications. Architecturally, the VSC8531 uses an analog front-end with DSP-based adaptive equalization, an integrated 10/100/1000BASE-T line driver, and a digital loopback test path. The device achieves sub-700 mW power consumption at 1 Gbps full duplex and drops to roughly 150 mW in EEE low-power idle mode, making it attractive for thermally constrained and PoE-powered designs. Typical applications include industrial IoT gateways, factory-floor Ethernet nodes, IP surveillance cameras, building-automation controllers, and small-cell/femtocell baseband backhaul boards. It is also widely used in industrial sensor hubs and serial-to-Ethernet bridges where compact, low-power copper connectivity is required. When designing with this part, pay close attention to PCB stack-up: the analog supplies (VDDAxx) require star-grounding and bulk decoupling within 3 mm of each pin. Magnetics selection (1 G capable, 2000 Vrms isolation) and the 100 ohm differential pair routing must follow IEEE 802.3 return-loss masks. Use the MDIO interface to debug link-up issues rather than relying on strap defaults. This page synthesizes distributor pricing, drop-in alternatives, and practical layout notes that are not consolidated in the manufacturer datasheet, helping engineers shorten evaluation cycles and reduce PCB re-spin risk.

Cotação Contato
VSC8538XHJ - Octal-Port Gigabit Ethernet PHY | Microchip
VSC8538XHJ

VSC8538XHJ - Octal-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8538XHJ is an octal-port 10/100/1000BASE-T Ethernet physical-layer transceiver in a 444-pin HS-BGA package with an exposed pad. It combines eight Gigabit Ethernet PHY channels, integrated line-side termination, and a patented low-EMI line driver in a 27 mm package. The device supports 1.8 V, 2.5 V, and 3.3 V supply options and consumes 650 mW per port in 1000BASE-T mode. A physical-layer transceiver, or PHY, is the interface between a digital network controller and twisted-pair copper cabling. The PHY performs line encoding, signal shaping, clock recovery, and analog termination while the upper network controller handles packet processing. Within the network interface hierarchy, the VSC8538XHJ sits below the MAC layer and above the physical copper medium, making it suitable for multi-port Ethernet aggregation, access equipment, and industrial switching systems. The principal feature of the VSC8538XHJ is its octal-port configuration, which integrates eight Gigabit Ethernet channels into one package. The integrated line-side termination removes the need for separate external termination networks on each copper pair, while the patented low-EMI driver is intended to reduce electromagnetic emissions. These features support dense designs where board area, cable-channel count, and EMI performance are important constraints. The operating supply options of 1.8 V, 2.5 V, and 3.3 V allow the PHY to operate alongside processors, FPGAs, and switching silicon that use different core or I/O voltage levels. Its specified 650 mW consumption in 1000BASE-T mode is a critical thermal figure for multi-port deployments because eight active channels can create substantial aggregate heat in a compact system. Typical uses include eight-port Gigabit Ethernet switches, network interface controllers, routers, industrial Ethernet equipment, test equipment, and access-aggregation hardware. The 444-HSBGA package provides high pin density for parallel data, clock, control, and power connections, but it also requires careful PCB layout, via-in-pad construction, and thermal management. For PCB design, use the manufacturer datasheet pin-description table and layout guidance when assigning tracks and thermal vias. Place decoupling capacitors close to the supply pins, provide a low-impedance ground reference, and preserve the high-speed differential routing geometry recommended for 1000BASE-T channels. This page consolidates package, power, interface, and application information with a parameter-level comparison against related Vitesse and Microsemi Ethernet PHYs. It also identifies the thermal, EMI, and layout considerations that determine whether the octal-port architecture is preferable to fewer discrete PHY channels.

Cotação Contato
VSC8541XMV - Gigabit Ethernet Copper PHY | Microchip
VSC8541XMV

VSC8541XMV - Gigabit Ethernet Copper PHY | Microchip

The Microchip Technology VSC8541XMV is a low-power, small-form-factor single-port Gigabit Ethernet copper PHY supporting 10/100/1000BASE-T communication in a 68-pin QFN package measuring 8 x 8 mm. It supports GMII, RGMII, MII, and RMII interfaces, with EEE, Wake-on-LAN, and Synchronous Ethernet capabilities for space-constrained networking equipment. A copper PHY is the physical-layer interface between a network switch, router, control system, or other digital controller and a twisted-pair Ethernet cable. Within the semiconductor hierarchy, the VSC8541XMV belongs to the Ethernet transceiver and interface-controller family, with broader application in industrial communication, access equipment, embedded systems, and 10/100/1000BASE-T network interfaces. Key features include support for all three Gigabit Ethernet copper rates, Energy Efficient Ethernet, Wake-on-LAN, and Synchronous Ethernet. Synchronous Ethernet is especially useful in carrier and timing-sensitive infrastructure because it allows Ethernet traffic to be referenced to a common clock. The four supported MAC-facing interfaces provide flexibility when connecting the PHY to processors, switches, routers, or custom Ethernet controllers. The VSC8541 device architecture is intended for compact, low-power Ethernet designs where board area is constrained. Its 8 x 8 mm QFN-68 construction supports high-density placement, while the RGMII and RMII options can simplify connections to systems with different parallel-interface requirements. GMII and MII provide additional options for designs using higher-speed or legacy parallel Ethernet interfaces. Typical applications include industrial Ethernet gateways, routers, switches, network interface cards, telecommunications access equipment, embedded Linux platforms, and copper backplane links. EEE can reduce power consumption when link activity is low, while Wake-on-LAN supports remote activation and network management. Synchronous Ethernet is useful in infrastructure requiring deterministic clock distribution across packet-processing equipment. When laying out a PCB, follow the Microchip VSC8541 Hardware Design Checklist for high-speed trace routing, supply decoupling, magnetic-component placement, and return-path continuity. Pay particular attention to impedance-controlled differential pairs, component-loop area, and grounding around the exposed thermal pad. The exact pin assignments and layer-specific layout guidance should be taken from the manufacturer datasheet corresponding to the ordered suffix. This product overview combines the confirmed VSC8541 family capabilities, package information, interface options, and hardware-design guidance with practical guidance for Ethernet PCB implementation. It also distinguishes the documented ordering variants that can be evaluated when an existing VSC8541XMV design requires a replacement.

Cotação Contato
VSC8601XKN Gigabit Ethernet PHY | Microchip Technology
VSC8601XKN

VSC8601XKN Gigabit Ethernet PHY | Microchip Technology

The Microchip Technology VSC8601XKN is a single-channel Gigabit Ethernet PHY transceiver with an RGMII MAC interface, supporting 10BASE-T, 100BASE-T, and 1000BASE-T operation. The device is offered in a 64-LQFP exposed-pad package measuring 10 mm by 10 mm, providing a high-density interface solution for Ethernet-connected embedded systems. A Gigabit Ethernet physical-layer transceiver, commonly called a Gigabit Ethernet PHY, converts between digital MAC-layer data and analog signals carried over twisted-pair cabling. Within the network hierarchy, the PHY sits beneath the Ethernet MAC controller and connects a digital processor or SoC to a 10/100/1000BASE-T network. Its RGMII interface provides a parallel digital connection between the PHY and the MAC while the integrated transceiver handles the physical network medium. The VSC8601XKN combines 10 Mb/s, 100 Mb/s, and 1 Gb/s operation in one PHY. The listed package is a 64-LQFP-EP configuration in a 10 mm by 10 mm outline, giving the device 64 numbered connections plus an exposed thermal pad. Search listings also identify the part as Pb-free and as a one-driver, one-receiver transceiver. These characteristics make it suitable for compact industrial, networking, test, and embedded Ethernet equipment. Operation requires both digital and analog power rails. The available technical listings identify 1.2 V and 3.3 V operation, while another listing describes 2.5 V and 3.3 V supply conditions. The exact rail assignment, tolerance range, and sequencing requirements must be taken from the manufacturer datasheet before schematic capture. The exposed pad requires careful PCB thermal design because it provides an important heat-transfer path from the device to the board. Typical uses include industrial Ethernet controllers, network switches, network interface cards, embedded gateways, communications equipment, and test systems requiring access to copper Ethernet networks. The RGMII MAC interface makes the PHY appropriate where a host processor already implements the Ethernet MAC function. At 1 Gb/s, however, signal integrity, trace length, connector layout, return-loss requirements, and magnetic-component selection remain important parts of the complete Ethernet design. During layout, follow the pin-description table, recommended decoupling network, and reference layout in the manufacturer datasheet. Place high-frequency and sensitive transceiver connections away from noisy digital and switching-regulator paths, provide a low-impedance ground plane, and connect the exposed pad to the intended ground structure with an appropriate via pattern. Confirm the exact RGMII voltage levels and trace constraints before routing, because interface timing and topology are not interchangeable across PHY implementations. This product page consolidates the confirmed device identity, package, supported Ethernet rates, interface type, power-supply information, sourcing data, and engineering guidance for the VSC8601XKN. It also distinguishes true pin-compatible replacements from merely functional Gigabit Ethernet PHY alternatives, helping engineers make PCB-level replacement decisions without confusing similar protocol support with drop-in compatibility.

Cotação Contato
VSC8641XJF - 1-Port GbE Copper PHY with RGMII/GMII | Microchip
VSC8641XJF

VSC8641XJF - 1-Port GbE Copper PHY with RGMII/GMII | Microchip

The Microchip Technology VSC8641XJF is a single-port 10/100/1000BASE-T Gigabit Ethernet copper PHY with RGMII and GMII MAC interfaces, operating from 2.5 V and 3.3 V supply rails in an 88-pin QFN package with an exposed thermal pad. A PHY (Physical Layer transceiver) is the lowest layer of an Ethernet link. It converts parallel digital MAC data into differential copper signalling for twisted-pair cabling, and recovers clock and data from the received analogue waveform. In the OSI-style hierarchy, a PHY sits below the data link layer and the MAC controller: MAC -> PHY -> transformer -> twisted pair. Because the VSC8641XJF integrates the analogue front end, line drivers, comparators, clock recovery and digital interface logic on one die, it removes the discrete magnetics interface complexity that would otherwise dominate a copper Ethernet port design. Key features of the VSC8641XJF include a 1/1 driver-receiver configuration in a PHY transceiver, support for all three copper speeds (10, 100 and 1000 Mb/s) on a single port, full-duplex operation, and both RGMII and GMII MAC-side interfaces so it can attach to a wide range of switching silicon. The device runs from 2.5 V and 3.3 V supplies and is offered in an 88-VFQFN exposed-pad package suitable for surface-mount assembly and copper-heat-spreader land patterns. Architecturally the device is a low-power, highly integrated Gigabit PHY originally developed by Vitesse Semiconductor and now maintained by Microchip Technology. It is intended to pair with a separate MAC or switch ASIC over RGMII, which keeps the digital interconnect short and low-cost relative to integrating a full switch fabric on the same die. The exposed pad in the package provides the thermal path for the analogue and clocking sections during continuous 1000BASE-T operation. Typical end applications include standalone copper-to-fibre media converters, industrial and telecom access equipment, IP cameras and surveillance front ends, set-top and access gateways, and single-port Ethernet links embedded in test and measurement instruments. Any design that needs one deterministic, low-latency 1000BASE-T copper port with a selectable MAC interface benefits from the device. When designing around the VSC8641XJF, remember that the exposed pad must be tied to the ground plane and the MAC interface timing must be budgeted against the RGMII/GMII specification, since the PHY does not include the packet buffer that an integrated switch would provide. Because the device is listed by the manufacturer as not recommended for new designs, confirm lifecycle and support status before committing to a long production program. This page consolidates manufacturer and distributor documentation, parameter comparisons and drop-in alternatives into one engineering reference, adding design notes, thermal and layout guidance and parameter-by-parameter comparison tables that are not available on a single distributor listing.

Cotação Contato
VSC8641XKO - Gigabit Ethernet PHY | Microchip | 100-LQFP
VSC8641XKO

VSC8641XKO - Gigabit Ethernet PHY | Microchip | 100-LQFP

The Microchip Technology VSC8641XKO is a single-port Gigabit Ethernet physical-layer transceiver for copper Ethernet links, supplied in a 100-LQFP package. The device operates from 2.5 V and 3.3 V supply rails and provides one integrated transceiver for Gigabit Ethernet designs using GMII or RGMII host interfaces. Its package is identified as 100-LQFP, while the ordering code XKO is associated with tray packaging in the component listing. A Gigabit Ethernet PHY is the physical-layer component that converts digital Ethernet data into electrical signaling for a twisted-pair cable and reconstructs incoming signaling into data for the network controller or communications processor. Within the Ethernet hierarchy, the VSC8641XKO sits between a MAC or switch fabric and the physical network medium. It is therefore relevant to industrial Ethernet equipment, network appliances, access systems, and embedded communications platforms that require a 1 GbE copper-network interface. The VSC8641 family is described by Vitesse Semiconductor as being designed for high-performance, low-power, and low-cost Gigabit Ethernet PHYs. The family combines a highly integrated GbE PHY with support for both GMII and RGMII connectivity, allowing the host interface to be selected according to processor pin availability and clocking requirements. The exact transceiver thresholds, internal reference requirements, latency, cable reach, and operating-temperature limits should be confirmed against the VSC8641 manufacturer datasheet before a circuit is released. For implementation, the VSC8641XKO requires a carefully designed Ethernet magnetics path, controlled clocking, suitable supply decoupling, and a PCB layout that preserves the high-speed differential signals. The 100-LQFP package provides many power, ground, analog, and digital interface connections, so its pin assignment and exposed routing requirements must be followed directly from the manufacturer pin-description table. Commercial availability and lifecycle decisions should also be reconfirmed with Microchip. Typical applications include industrial routers, network-interface controllers, Ethernet switches, embedded gateways, set-top equipment, and communications modules requiring a compact 1 GbE PHY. Because the VSC8641XKO is a dedicated interface device rather than a general-purpose processor, its value lies in reducing PHY implementation effort while preserving the flexibility of GMII or RGMII attachment to a host controller. This product overview combines the exact orderable MPN, package information, supply information, interface description, source links, and engineering guidance to support initial design evaluation. Use the Request a Quote form on this page for current commercial conditions, and verify lifecycle status, pin functions, electrical limits, and recommended magnetics against the current manufacturer documentation before production release.

Cotação Contato
VSC8658XHJ - Octal Gigabit Ethernet PHY | Microchip
VSC8658XHJ

VSC8658XHJ - Octal Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8658XHJ is an octal Gigabit Ethernet transceiver with eight copper 10/100/1000BASE-T ports and integrated 100BASEFX/1000BASE-X SerDes capability. It includes two fully integrated 1.25 G SerDes interfaces and is packaged in a 444-BGA package measuring 27 x 27 mm. The device is intended primarily for space-constrained, multiport networking equipment. An Ethernet transceiver combines physical-layer and interface functions within an Ethernet communication system. The physical layer converts logical data into electrical or optical signaling, while the associated SerDes interface transfers data between parallel PHY functions and a network processor or switch ASIC. VSC8658XHJ belongs to the transceiver hierarchy that supports copper and fiber media in a single multiport design. The principal feature set includes eight Gigabit Ethernet channels, support for 10/100/1000BASE-T copper operation, 100BASEFX and 1000BASE-X fiber operation, and two 1.25 G SerDes interfaces. This combination allows one transceiver to support both electrical and optical network ports, reducing the number of external physical-layer devices in suitable switch, router, and industrial networking designs. The VSC8658 architecture integrates eight Gigabit Ethernet PHYs with dual SerDes connectivity in one compact ball grid array package. Integration can simplify board partitioning by bringing copper and fiber media interfaces into one device. The 27 x 27 mm 444-BGA format nevertheless requires careful escape routing, power-plane planning, high-speed return-path management, and thermal verification during PCB implementation. Typical uses include multiport switches, routers, aggregation equipment, and industrial Ethernet systems. A copper-focused design can use the 10/100/1000BASE-T channels directly, while a fiber uplink can use 100BASEFX or 1000BASE-X through the integrated SerDes path. Network processors and switching ASICs require compatible link interfaces, clocking, and reference circuitry to operate with the PHY correctly. For PCB design, follow the manufacturer’s package, reference-design, layout, and decoupling instructions rather than routing high-speed links from general package conventions. Ball-grid-array escape routing, power delivery, thermal management, and high-speed SerDes return paths require constraint-driven layout and measurement-based verification. This page organizes the identified device capabilities with application guidance, engineering considerations, a parameter comparison framework, and sourcing information. It distinguishes the VSC8658 family-level functions from the exact XHJ ordering code and helps designers confirm package, media, lifecycle, and procurement requirements before schematic capture.

Cotação Contato
VSC8662XIC - 2-Port Gigabit Ethernet PHY | Microchip Technology
VSC8662XIC

VSC8662XIC - 2-Port Gigabit Ethernet PHY | Microchip Technology

The Microchip Technology VSC8662XIC is a two-port Gigabit Ethernet copper and fiber PHY designed for Synchronous Ethernet and telecommunications equipment. It provides 10/100/1000 Base-T connectivity, support for optical-fiber links, cable diagnostics, programmable LED indication, and SyncE timing functions in a 256-BGA package measuring 17 mm by 17 mm. The industrial-temperature variant is identified by the XIC suffix. An Ethernet physical-layer transceiver, or PHY, converts between digital Ethernet data and electrical or optical signaling at the physical layer. The VSC8662 belongs to the Gigabit Ethernet transceiver hierarchy, combining copper and fiber interfaces in one network-facing device. It sits between a network processor, switch, or communications equipment and external copper or fiber links, while adding synchronization capabilities for carrier-grade timing-sensitive networks. Key features include two Gigabit Ethernet PHY ports, copper and optical-fiber support, cable diagnostics, programmable LED indication, and Synchronous Ethernet support. The SyncE function provides traceable timing across TDM backhaul links and cellular base-station networks. The 256-ball BGA package supports dense telecommunications and networking designs, while its industrial-temperature qualification makes it suitable for equipment expected to operate outside consumer-temperature environments. The VSC8662 integrates both copper and fiber connectivity in one package, reducing the need for separate physical-layer devices in mixed-media network equipment. Its cable-diagnostics capability helps installation and maintenance teams identify wiring faults, while programmable LEDs simplify board-level status monitoring. SyncE support distinguishes the device from basic Gigabit Ethernet PHYs designed only for data transfer. Typical uses include cellular base stations, TDM backhaul equipment, access networks, aggregation platforms, and industrial Ethernet gateways. In these systems, the PHY can connect network processors to copper uplinks while providing a fiber interface for longer-distance links. The synchronized timing functions are particularly useful where backhaul traffic must maintain traceable network timing. Design with the manufacturer datasheet as the authority for ball assignments, electrical limits, transceiver initialization, media-dependent-interface behavior, and recommended magnetics or optical components. High-speed differential routing, controlled reference planes, solid power distribution, and compliance testing remain essential in a 256-BGA Ethernet PHY design. This product overview combines manufacturer positioning, distributor identification, package details, and application guidance with practical design considerations for engineers evaluating the VSC8662XIC in copper, fiber, and Synchronous Ethernet equipment.

Cotação Contato
VSC8664EV - 4-Port Gigabit Ethernet PHY | Microchip Technology
VSC8664EV

VSC8664EV - 4-Port Gigabit Ethernet PHY | Microchip Technology

The Microchip Technology VSC8664EV is a four-port Gigabit Ethernet PHY with copper and fiber connectivity, dual recovered-clock outputs, and support for carrier-quality Synchronous Ethernet. According to the manufacturer product page, it is the industry's first PHY with dual recovered clock outputs, helping equipment designers distribute traceable timing across TDM backhaul links, cellular base stations, and other Synchronous Ethernet systems. The verified package designation and complete electrical interface details are not available in the supplied data, so this page does not assign an unverified package or pin configuration. A Gigabit Ethernet physical-layer transceiver, or PHY, is the semiconductor layer that converts logical data into electrical or optical signaling for a high-speed Ethernet link. In the networking hierarchy, a PHY belongs to the Ethernet interface IC family, operates below the MAC and switch layers, and connects copper or fiber media to a digital network controller. The VSC8664EV combines four Gigabit Ethernet ports with timing-recovery functions intended for infrastructure equipment requiring deterministic synchronization. The principal verified feature is the pair of recovered-clock outputs. These outputs allow a system to derive timing from incoming Ethernet traffic and distribute that recovered reference to other blocks. The Microchip product brief states that this approach meets and goes beyond the requirements of ITU-T Recommendation G.8261/Y.1361. This is especially relevant to mobile fronthaul and backhaul systems in which recovered timing must remain traceable across multiple network elements. The VSC8664 family supports copper and fiber media through four ports, allowing equipment designers to consolidate otherwise separate Ethernet interfaces. Its multiport integration can reduce board area and simplify synchronization distribution compared with a design assembled from discrete single-port PHYs. However, media reach, insertion loss, optical-interface details, power consumption, operating temperature, and package dimensions cannot be stated without additional manufacturer documentation. Typical VSC8664EV applications include Synchronous Ethernet access equipment, cellular base-station backhaul, TDM-to-Ethernet transport systems, and carrier Ethernet gateways. In these systems, the four integrated ports can connect multiple network interfaces while the two recovered clocks provide timing references to aggregation, switching, or line-card electronics. Copper and fiber support can also reduce adapter complexity when equipment must accommodate different deployment media. The primary design consideration is timing integrity. Engineers should preserve the recovered-clock routing specified by the manufacturer and account for clock jitter, isolation, trace impedance, and return paths on the PCB. Supply rails and optical or copper channel implementations must follow the complete datasheet because detailed schematic, capacitor, layout, and power-sequence requirements are not present in the verified source set supplied for this record. This product record combines verified manufacturer capabilities, distributor availability information, pricing-status disclosures, interface-classification context, and engineering-oriented application analysis. It also distinguishes confirmed parameters from missing data, allowing procurement and hardware teams to evaluate the VSC8664EV without mistaking an unverified package, pinout, or electrical limit for a guaranteed specification.

Cotação Contato
VSC8664XIC - Quad 1.25Gbps Ethernet PHY | Microchip
VSC8664XIC

VSC8664XIC - Quad 1.25Gbps Ethernet PHY | Microchip

The Microchip Technology VSC8664XIC is a quad-port 10/100/1000BASE-T Ethernet physical-layer transceiver with support for 10 Mbps, 100 Mbps, and 1 Gbps operation. The device also provides 100BASE-FX capability, dual recovered-clock outputs for Synchronous Ethernet, and a 1.25 Gbps-per-port serialization rate in a 256-pin PBGA package. Its commercial temperature range is 0°C to +70°C. An Ethernet PHY is an interface IC that converts digital data into signals suitable for transmission over copper or fiber media while receiving and recovering data from those media. The VSC8664XIC belongs to the PHY hierarchy within Ethernet interface ICs, where a physical-layer transceiver works alongside a MAC, switch, processor, and physical connector. Its four-channel architecture consolidates multiple copper and fiber links into one high-density network-interface device. The primary feature set includes four 10/100/1000BASE-T ports, 100BASE-FX support, and dual recovered-clock outputs. According to the Microchip VSC8664 product page, the recovered clocks support carrier-quality Synchronous Ethernet, or SyncE. This feature is useful where network equipment must derive timing from the Ethernet physical layer for synchronous packet transport rather than relying exclusively on a separate asynchronous clock source. Each channel supports a maximum serialization rate of 1.25 Gbps, allowing 1 Gbps Ethernet payload operation with line-rate encoding overhead. The quad-port organization makes the device suitable for multi-port edge equipment, access systems, industrial Ethernet switches, and network interface controllers requiring several copper links plus optical connectivity. A common package also simplifies board routing for multi-channel designs compared with several discrete PHY devices. Typical applications include carrier Ethernet equipment, industrial network gateways, multi-port Ethernet controllers, telecommunications access hardware, and rack-mounted or embedded systems requiring 1 Gbps copper links with optional fiber backhaul. The 256-pin PBGA footprint is appropriate for multilayer PCB layouts where dense power, ground, high-speed signal, and control connectivity can be routed with short connections. The principal design consideration is that this device is a high-pin-count mixed-signal and high-speed communications component. Its 256-pin PBGA requires careful layer-stack selection, via-in-pad or via-array construction, local power-plane distribution, and strict impedance control for each high-speed copper interface. Differential pairs should be routed as controlled-impedance nets, with return paths kept continuous and noisy digital or switching circuitry separated from PHY clock and analog domains. This page combines the manufacturer’s functional description, exact orderable package information, temperature range, source listings, and practical PCB guidance into a design-oriented reference for engineers evaluating the VSC8664XIC. It also distinguishes the available same-family hardware option from unverified cross-brand substitutes, helping procurement teams avoid assuming that similar Ethernet PHYs are drop-in replacements.

Cotação Contato
VSP3200Y - 16-Bit 8MSPS CCD Signal Processor | TI
VSP3200Y

VSP3200Y - 16-Bit 8MSPS CCD Signal Processor | TI

The Texas Instruments VSP3200Y is a 16-bit, 8 MSPS, 3-channel analog front end (AFE) CCD signal processor with dual output mode, housed in a 48-pin LQFP (7x7 mm) package and operating from a single +5V supply. A CCD/CIS analog front end is the mixed-signal stage between an image sensor and a digital image processor. It samples tiny charge-derived pixel voltages, removes reset and kTC noise through correlated double sampling (CDS), amplifies the signal to match the ADC input range, and digitizes it. Within the signal chain hierarchy, the AFE sits between the sensor and the image-signal processor, and is a critical determinant of final image dynamic range and noise floor. Key features include an integrated triple correlated double sampler (CDS), a programmable gain amplifier with up to +13 dB gain, selectable operating modes (1-channel or 3-channel CCD mode at up to 8 MSPS), selectable normal or demultiplexed output modes, and an offset control range of +3V. The 16-bit conversion resolution preserves fine shadow detail in scanned images, essential for document and film scanners. Architecturally, the VSP3200 combines three CDS/PGA channels feeding a 16-bit ADC pipeline optimized for line-rate scanning. The demultiplexed output mode makes the device interface compatible with the VSP3210, which is pin-to-pin compatible with the VSP3100 in that mode, providing a migration path to a one-chip solution. Typical applications include flatbed document scanners, film scanners, CIS-based scanner modules, and industrial inspection cameras that use CCD or CIS sensors. Design consideration: because the part runs from a single +5V rail, keep the analog 5V supply clean and well decoupled; noise on this rail directly appears in pixel data at 16-bit resolution levels. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
VSP3200Y-2K - 16-Bit 8MSPS CCD Signal Processor | Texas Instruments
VSP3200Y-2K

VSP3200Y-2K - 16-Bit 8MSPS CCD Signal Processor | Texas Instruments

The Texas Instruments VSP3200Y-2K is a 16-bit, 8 MSPS, 3-channel analog front end (AFE) signal processor for CCD, CMOS, and CIS image sensors, housed in a 48-pin LQFP (7x7 mm) package and operating from a single +5V supply. An analog front end for image sensors is the circuit block between the imaging array and the digital image processor. It performs correlated double sampling (CDS) to remove reset noise and kTC noise from the CCD output, applies programmable gain to normalize signal amplitude across color channels, and digitizes the conditioned signal with a high-resolution ADC. Within the system hierarchy, the AFE sits inside the imaging signal chain: image sensor -> AFE (CDS + PGA + ADC) -> DSP/ASIC -> host interface. Key features of the VSP3200Y include three Correlated Double Samplers (CDSs) and three Programmable Gain Amplifiers (PGAs) that process CCD signals from 3-channel (RGB) scanners, a 16-bit conversion path running at up to 8 MSPS, dual output mode for flexible host interfacing, and single +5V operation that simplifies power tree design in desktop scanner platforms. Technically, the VSP3200Y integrates the complete analog processing chain for CCD signal conditioning: the CDS stages sample the pixel signal twice to cancel low-frequency drift and reset noise, the PGAs allow per-channel gain calibration, and the internal 16-bit ADC delivers 8 Msps throughput. Interface compatibility with the VSP3210 single-chip product, which is itself pin-to-pin compatible with the VSP3100 in demultiplexed output mode, provides a migration path for higher integration designs. Typical applications are flatbed and document scanners using CCD or CIS linear arrays, industrial inspection cameras, and desktop imaging peripherals that require 16-bit depth at moderate 8 MSPS speeds. A key design consideration is layout of the analog ground and the CCD output trace: keep the sensor-to-CDS input path short, guard it from digital output drivers, and provide a clean +5V rail with local decoupling, because residual reset noise not removed by the CDS directly limits the effective 16-bit resolution. This page synthesizes distributor inventory, drop-in alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
VSP3200Y-2KG4 - 16-Bit 8MSPS CCD Signal Processor | TI
VSP3200Y-2KG4

VSP3200Y-2KG4 - 16-Bit 8MSPS CCD Signal Processor | TI

The Texas Instruments VSP3200Y-2KG4 is a 16-bit, 8 MSPS 3-channel analog front end (AFE) signal processor for CCD, CMOS and CIS image sensors, housed in a 48-pin LQFP (7x7 mm) package and operating from a single +5 V supply over 0C to +85C. An analog front end for image sensors is a specialized data-conversion IC that sits between a charge-coupled device (CCD) sensor and the digital image pipeline. It performs correlated double sampling (CDS) to remove kTC and low-frequency noise, applies programmable gain, offsets the black level, and digitizes the conditioned pixel signal with a high-speed ADC, delivering a clean digital video stream to downstream DSP or image-processing logic. Key features of the VSP3200Y include three independent Correlated Double Samplers (CDS) and three Programmable Gain Amplifiers (PGAs) that process CCD signal channels end-to-end on one chip, a 16-bit ADC running at up to 8 MSPS, and dual output mode for flexible system interfacing. Integration of the complete analog chain eliminates discrete CDS/PGA stages, reducing board area and analog design risk. The device is built on CMOS process technology and provides a serial digital output interface. According to TI product documentation, the VSP3200Y is interface compatible with the VSP3210, a 16-bit one-chip product; the VSP3210 is in turn pin-to-pin compatible with the VSP3100 when operated in demultiplexed output mode, giving designers a documented upgrade and substitution path within the same LQFP-48 family. Typical applications include CCD camera signal chains for industrial inspection, consumer video capture, and contact image sensor (CIS) modules used in scanners and document imaging. The single 5 V supply suits legacy 5 V consumer and industrial boards. When designing with this part, verify power-supply decoupling on both the analog and digital domains and confirm the output mode (multiplexed vs dual) matches the pixel-rate timing of your CCD clocking scheme. This page synthesizes distributor availability, drop-in family alternatives (VSP3210, VSP3200Y, VSP3100), and design considerations not found on the manufacturer product page.

Cotação Contato
W24257AJ-20 - 32Kx8 20ns CMOS SRAM | Winbond DIP-28
W24257AJ20

W24257AJ-20 - 32Kx8 20ns CMOS SRAM | Winbond DIP-28

The Winbond W24257AJ-20 is a 32,768 x 8-bit high-speed CMOS Static RAM (SRAM) organized as 32K words by 8 bits, with a 20 ns maximum access time and housed in a 28-pin DIP (J-bend) through-hole package. It operates from a single +5 V power supply and is manufactured using Winbond's high-performance CMOS process, delivering low power dissipation typical of CMOS memory. A Static RAM is a type of volatile semiconductor memory that retains data bits as long as power is applied, with no refresh cycle required - in contrast to dynamic RAM (DRAM). SRAM belongs to the memory ICs family within the broader semiconductor hierarchy (SRAM -> volatile memory -> random-access memory -> integrated circuit -> semiconductor). The W24257AJ-20 is a fully asynchronous SRAM with standard JEDEC-compatible pinout for a 32K x 8 organization, allowing direct replacement of legacy 62256-type devices on existing PCBs. Key features of the W24257AJ-20 include a 20 ns access time (suitable for systems clocked up to 50 MHz without wait states), CMOS low standby current, fully static operation (no clock or refresh required), and TTL-compatible I/O levels. The device supports common memory-interface signals such as /CS1, CS2, /OE, and /WE, and provides three-state outputs for bus-oriented applications. The "AJ" suffix denotes the DIP-28 plastic package while "-20" specifies the 20 ns speed grade. Typical applications include legacy industrial controllers, point-of-sale terminals, firmware buffers for embedded microcontrollers, data-logging buffers, and as a working-memory expansion for older 8-bit and 16-bit microprocessor systems. The DIP-28 form factor is convenient for breadboarding, prototyping, and through-hole repair of legacy equipment. Because the part uses the standard 32K x 8 pinout, designers can upgrade older 8K x 8 or 32K x 8 SRAM sockets without any PCB rework. When designing with the W24257AJ-20, observe standard SRAM decoupling practice: place a 0.1 uF ceramic bypass capacitor close to the VCC pin and a bulk 10 uF capacitor on the supply rail. Avoid leaving inputs floating; tie unused /CS1 to VCC through a pull-up and unused /OE to GND to minimize ICC. The 20 ns grade is generally a drop-in replacement for slower 70-200 ns legacy SRAMs on the same PCB, but verify bus timing for high-MHz systems. This page synthesizes Winbond datasheet specifications, distributor stock signals, drop-in replacement candidates, and practical design notes not aggregated on any single distributor page.

Cotação Contato
W24512AKDV - 64Kx8 5V CMOS SRAM | Winbond
W24512AKDV

W24512AKDV - 64Kx8 5V CMOS SRAM | Winbond

The Winbond W24512AKDV is a 64K x 8 (512 Kbit) high-speed CMOS static RAM organized as 65,536 words of 8 bits, operating from a single 5V power supply. Fabricated on Winbond's high-performance CMOS process, the device offers industry-standard access times of 15/20/25/35 ns (per the W24512A datasheet family), low active power, and CMOS standby current, making it suitable for both high-performance and battery-aware designs. A static RAM (SRAM) is a type of volatile memory that stores each bit in a bi-stable latch, eliminating the need for periodic refresh cycles required by dynamic RAM. In the broader memory hierarchy, SRAM sits between ultra-fast register files and denser but slower DRAM/Flash. The 64K x 8 organization - eight data I/O lines and sixteen address lines - is the classic JEDEC-style parallel SRAM pinout that traces back to the original 6264-family 8K x 8 and is fully pin-compatible with modern asynchronous SRAMs. Key differentiating attributes include fully static operation (no clock or refresh required), TTL-compatible I/O, a chip-enable pin for memory expansion, and an output-enable pin for bus arbitration. The CMOS process delivers typical active currents in the tens of milliamps at full bus activity, with standby leakage dropping into the microamp range when CE is de-asserted - ideal for low-power embedded systems. Architecturally, the W24512AKDV uses a 6-transistor (6T) CMOS memory cell, which gives excellent noise immunity and stable read margins across temperature. The internal address decoders, write drivers, and sense amplifiers are optimized for sub-20 ns access at 5V, ensuring compliance with microprocessor and microcontroller bus timing without wait states in many cases. Typical applications include industrial controllers, data loggers, networking line cards using look-up tables, telecom buffers, point-of-sale terminals, and any embedded system needing byte-wide non-volatile cache/working memory paired with Flash. Engineers retrofitting legacy 5V designs or building new 5V-tolerant industrial equipment will find this part a direct mechanical and electrical substitute for older 6264-style SRAMs. When designing with this part, always place 0.1 uF decoupling capacitors close to VCC and VSS, and observe derating for output loading above 50 pF to stay within the 15/20/25/35 ns access-time envelopes. The CE pin must be pulled inactive for true standby current savings. This page synthesizes current distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.

Cotação Contato
W25H02JVTBIM - 2Gb QSPI NOR Flash, 24-TFBGA | Winbond
W25H02JVTBIM

W25H02JVTBIM - 2Gb QSPI NOR Flash, 24-TFBGA | Winbond

The Winbond W25H02JVTBIM is a 2 Gigabit (256M x 8) serial NOR Flash memory in a 24-pin TFBGA (8x6 mm) package, supporting standard SPI, Dual SPI, Quad SPI, QPI, and DTR (Double Transfer Rate) modes. Operating from a single 2.7V to 3.6V supply, it delivers up to 133 MHz clock rate with an equivalent throughput of 416 MHz (50 MB/s) in Quad-SPI/DTR mode. The device uses a standard SPI command set for read, program, and erase, with sector sizes of 4 KB and block sizes of 32 KB and 64 KB for flexible memory management. Background: A NOR Flash memory is a non-volatile storage technology that retains data without power and supports random access (execute-in-place / XIP), making it ideal for code storage and boot media. The QSPI NOR category, to which the W25H family belongs, uses a 4-wire SPI interface that effectively quadruples throughput versus legacy SPI. Within the memory hierarchy, QSPI NOR sits between SRAM (volatile, fast) and NAND Flash (non-volatile, block-oriented, slower random access), serving as fast boot ROM and parameter storage in embedded systems. Key features of the W25H02JVTBIM include uniform 4 KB sector erase, JEDEC standard manufacturer (0xEF) and device ID, hardware and software write protection, individual block and chip erase capability, and a continuous program/erase endurance of 100,000 cycles per sector. The device includes a 256-byte Security Register with OTP lockable bits for unique device identification and parameter storage, and supports single 2.7V-3.6V operation for direct connection to 3.3V MCUs. Architecture: Built on Winbond's proprietary NOR cell technology, the W25H02JVTBIM pairs a 32-bit shift register with an integrated command controller to manage page program (up to 256 bytes per page), sector/block/chip erase, and status register polling. The DTR mode samples data on both clock edges, doubling effective throughput at the same SCK frequency. The package pinout exposes /CS, SCK, IO0-IO3, /WP, /HOLD, VCC, and GND, enabling direct connection to modern MCU QSPI controllers. Typical applications: the W25H02JVTBIM is well suited to network router firmware storage, IoT gateway boot and data logging, set-top box / smart TV boot media, industrial HMI panel image storage, and automotive infotainment reference code where execute-in-place is required. Its 2 Gb density supports full firmware images plus room for OTA staging and asset storage. Design consideration: For systems upgrading from legacy SPI flash, verify that the host MCU's QSPI controller supports DTR mode to realize the full 50 MB/s throughput; otherwise the part still works in single-bit SPI mode. Ensure decoupling caps are placed as close as possible to VCC and GND, and follow Winbond's recommended PCB pad pattern for the 24-ball TFBGA.

Cotação Contato
W25H02JVTBIMG - 2Gb QSPI NOR Flash, 133MHz DTR, 24-TFBGA | Winbond
W25H02JVTBIMG

W25H02JVTBIMG - 2Gb QSPI NOR Flash, 133MHz DTR, 24-TFBGA | Winbond

The Winbond W25H02JVTBIMG is a 2-Gbit (256M x 8) Serial NOR Flash memory device in the W25H family, housed in a 24-ball TFBGA (8x6 mm) package with industry-standard Quad-SPI and DTR (Double Transfer Rate) capability. It operates from a single 2.7V to 3.6V supply, supports clock rates up to 133 MHz in DTR mode, and delivers an equivalent throughput of 532 Mbit/s (66.5 MB/s) for execute-in-place (XIP) and high-speed code-storage applications. A Serial NOR Flash is a non-volatile memory that fetches code or data serially using a few signal wires instead of a wide parallel bus. Winbond's W25H family extends the popular W25Q Quad-SPI architecture with higher density and DTR support, enabling faster boot times and lower pin-count PCB designs. QSPI NOR Flash sits between raw parallel NOR (high speed, high pin count) and SPI NAND (lower cost, more complex controllers), making it ideal for code shadowing, firmware storage, and data logging in cost-sensitive embedded designs. Key features of the W25H02JVTBIMG include 2 Gbit density organized as 256 Mbytes, support for Standard SPI, Dual-SPI, Quad-SPI, QPI, and DTR modes, an OTP security area of 1024 bytes, individual block/sector protection, and JEDEC standard SFDP (Serial Flash Parameters Table) for parameter discovery. The device is rated for 100,000 erase cycles per sector minimum and 20-year data retention. It supports uniform 4 KB sector erase, 32 KB and 64 KB block erase, and full-chip erase, with status-register based protection for the top or bottom 4 KB block to host bootloader parameters. The W25H02JVTBIMG implements a low-power architecture with typical standby current under 10 µA and active read current around 25 mA at 104 MHz. Its DTR interface reads two bits per clock edge, effectively doubling throughput without raising the SPI clock frequency, which simplifies PCB signal-integrity design. The 'IMG' suffix (13th character 'G') indicates the part is manufactured using renewable energy per Winbond's published program; all specifications are identical to the W25H02JVTBIM variant. Typical applications include IoT edge devices, smart-home gateways, automotive infotainment and ADAS subsystems, industrial HMI panels, networking equipment boot ROM, and AI accelerator firmware storage. Compared with SPI NAND, NOR Flash provides faster random read latency (no ECC required) and byte-level XIP execution, at a higher cost-per-bit. When designing with this part, ensure that the host MCU's QSPI controller supports 3V flash and that the WP#/Hold# pins are properly terminated to avoid bus contention during in-system programming. Refer to the Winbond W25H02JV datasheet for SFDP parameters, AC timing, and recommended land-pattern geometry.

Cotação Contato
W25M02GWZEIG - 2G-bit Serial SLC NAND Flash, 1.8V SPI | Winbond
W25M02GWZEIG

W25M02GWZEIG - 2G-bit Serial SLC NAND Flash, 1.8V SPI | Winbond

The Winbond W25M02GWZEIG is a 2G-bit (2x1G-bit) Serial Multi-Chip Package (MCP) NAND flash memory built by stacking two W25N01GW SLC NAND die inside a standard 8-pin WSON 8x6 mm package. The device operates from a 1.8V supply and supports Standard SPI, Dual SPI, and Quad SPI interfaces with clock rates up to 104 MHz, including Continuous Read and Concurrent Read/Write operations. It exposes the standard JEDEC NAND command set with on-chip ECC and bad-block management, giving designers an SPI-friendly alternative to raw parallel NAND. As a member of the Winbond SpiFlash family, the part targets code-storage and data-logging footprints where byte-level random access and small-page SPI reads are preferable to a parallel NAND controller. A Serial NAND flash is a non-volatile memory that uses the SPI bus to expose the page-oriented programming and block-oriented erase operations of NAND, while adding an internal controller that hides the 2K-byte page and 128K-byte block geometry from the host MCU. The category hierarchy is: NAND flash -> non-volatile memory -> memory IC -> semiconductor. Compared with NOR flash, NAND offers higher density per die at lower cost-per-bit, but requires ECC and wear-leveling at the application layer; the W25M02GWZEIG adds internal ECC and configurable bad-block tables to reduce that host overhead. Key features of the W25M02GWZEIG include 2 Gbit total density (256 Mbytes), 2 Kbyte pages, 64 Kbyte spare/parameter blocks, dual-die addressing via die-select CS logic, 100K endurance cycles per block, and 10-year data retention. The 1.8V VCC range (1.7V to 1.95V) suits battery-powered IoT devices, and the wide operating temperature range of -40C to +85C covers industrial and consumer profiles. Quad SPI mode delivers up to 52 Mbyte/s read throughput, while continuous-read mode lets the host stream sequential pages without re-issuing the read command. Internal ECC is configurable up to 8-bit per 512-byte sector with hardware reporting through status registers. The W25M02GWZEIG is built on Winbond's 46 nm SLC NAND process, where each cell stores a single bit for high endurance and predictable retention, in contrast to MLC/TLC used in higher-density cards. The dual-die stack uses independent chip-enable logic so each die appears as a contiguous 1 Gbit logical array; this is transparent to standard SPI drivers that treat the device as a single 2 Gbit array. Compared to a discrete W25N01GW pair, the MCP reduces PCB area by ~50% and simplifies routing. Typical applications include IoT edge nodes storing firmware and telemetry, smart-home hubs, wearable health monitors, point-of-sale terminals, and industrial sensor loggers. The 1.8V supply also makes the part a natural fit for low-power MCUs such as the STM32L4 and Ambiq Apollo series. In designs that already use a small NOR for boot, the W25M02GWZEIG can sit beside it as the larger mass-storage bank without changing the host SPI bus topology. When designing with the W25M02GWZEIG, route the CS#, SCLK, IO0-IO3, and WP#/HOLD# signals as a 50-ohm impedance-controlled group and place a 100 nF decoupling capacitor within 3 mm of the VCC pad to suppress switching transients during Quad SPI reads. Confirm host SPI mode timing against the Winbond datasheet's tV and tSU figures and budget ECC bytes inside each 2K-byte page if your host driver reads raw pages. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond what is printed in the manufacturer datasheet, giving engineers a single reference for selecting, sourcing, and qualifying the W25M02GWZEIG.

Cotação Contato
W25M02GWZEIG-TR - 2G-bit Serial NAND Flash, 1.8V, SPI | Winbond
W25M02GWZEIG-TR

W25M02GWZEIG-TR - 2G-bit Serial NAND Flash, 1.8V, SPI | Winbond

The Winbond W25M02GWZEIG-TR is a 2G-bit (2 x 1G-bit) serial Multi-Chip Package (MCP) flash memory built by stacking two individual 1G-bit W25N01GW SLC NAND die in a standard 8-pin WSON-8 (ZE) package. It operates from 1.7V to 1.95V supply and exposes a Serial Peripheral Interface (SPI) with single, dual, and quad I/O modes for high-throughput read access up to 104 MHz. According to the Winbond datasheet, the device supports continuous read across both die and concurrent operations between the two internal die for simultaneous read/write. A Serial NAND flash memory is a non-volatile storage IC that uses the SPI bus instead of a parallel interface, replacing legacy parallel NAND with a much smaller pin count while preserving page-based erase and program operations. Within the broader memory hierarchy, NAND flash sits below DRAM and NOR flash in random-access latency but offers far higher density per mm² and a much lower cost-per-bit, making it ideal for data logging, firmware shadowing, and multimedia buffering in embedded systems. The SpiFlash family from Winbond specifically targets cost-sensitive designs that need >128Mb of code or data storage. Key features include 2G-bit (256MB) density, 104 MHz maximum SPI clock, dual/quad SPI modes, page size of 2048 bytes + 64B spare area, block size of 128KB, and 100K program/erase cycles per block with 10-year data retention. The 8-WSON-8 8x6 mm package provides a compact footprint suitable for space-constrained PCB designs. The W25M02GW utilizes Winbond's proven 1G-bit SLC NAND die in a stacked-die MCP configuration. Internal die selection is automatic through a die-select command, and the host MCU sees a contiguous logical address space through extended addressing. ECC handling and bad-block management are typically implemented in the host controller or boot ROM for reliability. Typical applications include IoT edge devices, wearable electronics, automotive infotainment, point-of-sale terminals, industrial sensor data loggers, and 4G/LTE module firmware storage. The 1.8V operation makes it ideal for direct connection to low-power SoCs and PMICs without level shifters. When designing with this device, ensure the host controller implements software ECC (the W25M02GW is raw NAND without internal ECC engine) and reserves adequate RAM for the 2KB page buffer. Quad SPI mode requires all four data lines routed with length matching on the PCB for reliable high-speed reads.

Cotação Contato