Circuitos Integrados

DSPIC33EP128GS705-E/PT

DSPIC33EP128GS705-E/PT - 70 MIPS 16-bit DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128GS705-E/PT is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS from 128 KB (43K x 24) of Flash memory and 8 KB of RAM, operating at 3.3V in a 48-pin TQFP (7x7 mm) package with extended temperature support and AEC-Q100 automotive qualification. A digital signal controller combines the computational core of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above a general-purpose MCU: it executes DSP-class multiply-accumulate instructions while integrating high-speed PWM and ADC peripherals purpose-built for closed-loop digital power conversion. Key features include 70 MIPS core throughput, dual-partition Flash enabling live firmware updates for functional-safety designs, and the SMPS peripheral architecture targeted at switched-mode power supplies. The -E/PT suffix denotes extended temperature operation and the 48-pin TQFP tray package option. The dsPIC33EP128GS705 family supports AEC-Q100 automotive qualification and Functional Safety (FuSa) design flows, per Microchip product data. Dual-partition Flash allows one partition to execute while the other is erased and programmed, supporting safe field upgrades in automotive and industrial power systems. Typical applications include interleaved power factor correction (PFC), LLC and half-bridge DC-DC converters, digital UPS systems, solar micro-inverters, and automotive LED lighting or on-board charger control loops. Design consideration: this is a 3.3V-only device; level-shift or select logic-compatible peripherals when interfacing with 5V automotive buses, and budget Flash carefully since 128 KB is fixed across the GS705 variant. This page synthesizes drop-in family alternatives, AEO-optimized FAQs, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-09-23.

Cotação Contato

DSPIC33EP128GS705-I/PT

DSPIC33EP128GS705-I/PT - 16-Bit 70 MIPS DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128GS705-I/PT is a 16-bit dsPIC33EP Digital Signal Controller (DSC) delivering 70 MIPS performance with 128KB (43K x 24) of Flash memory and 8KB of RAM, housed in a 48-pin TQFP (7x7 mm) package. A Digital Signal Controller combines the compute architecture of a microcontroller with DSP-grade math capability in a single core. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes C code for housekeeping tasks while simultaneously running fast multiply-accumulate loops for control algorithms such as proportional-integral (PI) loops and space-vector modulation in switch-mode power conversion. Key features include the 70 MIPS 16-bit pipeline core, 128KB dual-partition Flash supporting live field firmware updates, and an SMPS-optimized peripheral set. Microchip classifies the dsPIC33EPXXGS70X family as a Digital Power Conversion DSC, with peripherals specifically designed for multi-loop digital switch-mode power supplies (SMPS). The part is also listed by DigiKey as Functional Safety (FuSa) supported. Technically, the dual-partition Flash architecture allows one code bank to execute while the other is erased and reprogrammed, which is essential for power products that require uninterrupted operation during firmware upgrades. The high instruction rate enables closure of fast control loops at switching frequencies common in AC-DC and DC-DC converters, reducing external analog circuitry. Typical applications include AC to DC converters, power factor correction (PFC) stages, DC-DC converters, and other digital power-conversion systems such as solar inverters and server power supplies. Microchip's Interleaved PFC reference design demonstrates the family producing a high-voltage DC output up to 350W from a universal input range. Design consideration: budget decoupling capacitance and a solid ground plane under the TQFP, and confirm 3.3V supply sequencing; SMPS-familiarity peripherals assume the board delivers clean analog reference rails for best control-loop accuracy. This page synthesizes distributor inventory data, drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128GS706T-I/PT

DSPIC33EP128GS706T-I/PT - 16-bit 70 MIPS DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GS706T-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance with 128KB (43K x 24) of Flash memory and 8KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and control peripherals of a microcontroller. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, providing deterministic single-cycle MAC (multiply-accumulate) operations, fast interrupts, and dedicated control-loop peripherals. The dsPIC33EP GS family is purpose-built for digital power conversion, where firmware executes closed-loop control at switching frequencies of hundreds of kilohertz. Key features include a 16-bit modified Harvard architecture core running at 70 MIPS from a 60 MHz external clock, up to 85 general-purpose I/Os, and specialized analog peripherals for power conversion including high-speed ADCs and analog comparators with dedicated PWM support. The device also carries Microchip's Functional Safety (FuSa) package qualification per DigiKey listings, supporting safety-critical designs. Technically, the dsPIC33EP core features DSP-engine single-cycle multiply-accumulate, 16 x 16-bit multiply with 32/40-bit accumulate, dual address generators, and hardware divide support. Flash is ECC-enabled and the device supports in-circuit programming via ICSP and debugging via the 5-wire interface. The GS70x subfamily adds SMPS-optimized peripherals: multiple high-resolution PWM modules with complementary outputs, dead-time insertion, fault inputs, and ADC-comparator triggering synchronized to the PWM timebase for cycle-by-cycle current limiting. Typical applications include AC-DC and DC-DC switch-mode power supplies, interleaved power factor correction (Microchip's 350W interleaved PFC reference design targets this family), digital lighting ballasts, battery chargers, solar micro-inverters, and motor control for industrial automation. Design consideration: the core requires a 3.0V to 3.6V supply, so pair the part with a 3.3V LDO rated for at least 100 mA and follow the datasheet decoupling guidance for the PWM-heavy pin loading typical of digital power designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128GS708-E/PT

DSPIC33EP128GS708-E/PT - 16-bit DSC 70 MIPS 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GS708-E/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33EP GS family for digital power applications, delivering up to 70 MIPS core performance with 128 KB (43K x 24) of Flash program memory and 8 KB of RAM, housed in an 80-pin TQFP (12x12 mm) package with extended temperature operation (E grade). A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting in the product hierarchy between a general-purpose MCU and a dedicated DSP. DSCs are the controller of choice for closed-loop switch-mode power conversion, where deterministic interrupt latency and high-resolution PWM are more important than general-purpose processing. Key features include the interconnected High-Speed PWM module with dedicated time bases and advanced modulation modes tailored for SMPS and digital power conversion, high-speed 10-bit and 12-bit ADC options with concurrent multi-channel sampling, integrated analog comparators and Programmable Gain Amplifiers (PGA), and DSP engine support with single-cycle MAC and dual operand fetch. The device runs from a single 3V to 3.6V supply and carries AEC-Q100 qualification and Functional Safety (FuSa) support, as listed by DigiKey. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with 16-bit data and 24-bit instructions, achieving deterministic execution suited to fast control loops. The GS family specifically interconnects the PWM, ADC, comparators, and PGA so trigger signals can be routed on-chip without CPU intervention, reducing loop latency in multi-loop power supplies. Typical applications include AC-DC power supplies, power factor correction (PFC) stages, DC-DC converters, solar micro-inverters, battery chargers, LED drivers, and uninterruptible power supplies. Design consideration: the extended-temperature -E grade is rated beyond the standard -40C to +85C industrial range; verify your thermal design supports the E-grade envelope, or the -I/PT variant may reduce cost. This page synthesizes distributor pricing, drop-in alternatives within the GS70X family, and practical design notes not found in the manufacturer datasheet. Prices shown are estimates as of 2026-09-23.

Cotação Contato

DSPIC33EP128GS804-E/PT

DSPIC33EP128GS804-E/PT - 16-bit 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EP128GS804-E/PT is a 16-bit Digital Signal Controller (DSC) delivering up to 70 MIPS performance with 128 KB of Flash program memory and 8 KB of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package operating from a 3.3 V supply across the extended -40C to +125C temperature range. A Digital Signal Controller combines the compute throughput of a digital signal processor with the peripherals and ease of use of a microcontroller. Within the power-management semiconductor hierarchy, the dsPIC33EP GS series sits in the digital signal controller class, purpose-built for closed-loop control of switch-mode power supplies where fast deterministic PWM, ADC sampling, and analog comparison are executed in a single chip. Key features include interconnected high-speed PWM modules for multi-loop SMPS control, a high-speed 12-bit ADC supporting sampling rates up to 4 Msps in the GS family, integrated analog comparators and a programmable gain amplifier (PGA), dual partition Flash supporting live firmware updates, and CAN, I2C, SPI, and UART interfaces for system communication. Architecturally, the dsPIC33EP core pairs a 16-bit modified Harvard pipeline with DSP instructions (MAC, barrel shifter) enabling control-law computation at loop rates unattainable by conventional MCUs at this price point. The peripheral interconnect between ADC, comparators, and PWM allows hardware-triggered reaction to fault conditions, minimizing software latency in overcurrent and overvoltage events. Typical applications include AC-to-DC converters, power factor correction stages, digital LED drivers, DC-DC and solar inverters, battery chargers, and uninterruptible power supplies - all multi-loop digital power-conversion topologies the GS family was designed for. Design consideration: budget PCB space for the decoupling and VCAP capacitor per the Microchip datasheet layout guidance, and reserve the dedicated programming pins (MCLR, PGD, PGC) for in-circuit debugging with PICkit or ICD tools. This page synthesizes distributor pricing, drop-in family alternatives, design notes, and application guidance not consolidated in the Microchip datasheet, with data verified as of 2026-09-23.

Cotação Contato

DSPIC33EP128GS804-I/ML

DSPIC33EP128GS804-I/ML - 16-bit 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EP128GS804-I/ML is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33EP core, with 128 KB (43K x 24) of dual-partition Flash memory with live-update capability, 8 KB of RAM, and CAN connectivity, housed in a 44-pin QFN (8x8 mm) package rated from -40C to +85C. A digital signal controller combines the compute characteristics of a microcontroller with the DSP engine of a digital signal processor. Within the power-management hierarchy, a DSC sits above a general-purpose MCU for control-loop tasks: it closes high-bandwidth feedback loops in switch-mode power supplies, executing Proportional-Integral-Derivative compensation at tens to hundreds of kilohertz, where a standard MCU would struggle to meet loop deadlines. The dsPIC33EP family from Microchip Technology is a widely deployed DSC platform for digital power. Key features of this GS-series device include interconnected high-speed PWM peripherals for multi-phase and multi-loop converters, an analog front end with ADC supporting a programmable gain amplifier (PGA), on-chip comparators for fast overcurrent protection, dual-partition Flash enabling live firmware update, and Functional Safety (FuSa) support as listed by DigiKey. Technically, the device executes the 16-bit dsPIC33EP instruction set with DSP multiply-accumulate instructions, supporting control math at up to 70 MIPS. The interconnected PWM, ADC, PGA, and comparator fabric allows analog events such as overcurrent trips to act on PWM outputs with minimal CPU intervention, which is essential for cycle-by-cycle current limiting in SMPS designs. Typical applications include AC-DC power supplies, DC-DC converters, battery chargers, power factor correction (PFC) stages, and digitally controlled lighting or welding power stages, where deterministic high-speed control is required. A key design consideration is that the 8 KB RAM constrains complex control structures; plan control-loop state buffers carefully, and verify CAN transceiver pairing early since CAN is integrated on-chip. This page synthesizes distributor pricing, drop-in same-family alternatives, practical design notes, and FAQ content not found in the manufacturer datasheet alone, as of 2026-09-23.

Cotação Contato

DSPIC33EP128GS804-I/PT

DSPIC33EP128GS804-I/PT - 16-bit 70MIPS Digital Power DSC | Microchip

The Microchip Technology DSPIC33EP128GS804-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS from 128 KB (43K x 24 instruction words) of flash memory and 8 KB of RAM, housed in a 44-pin TQFP (10x10 mm) package and rated for industrial temperature from -40C to +85C. A digital signal controller combines the compute power of a DSP core with the peripherals and ease of use of a microcontroller, sitting between an MCU and a DSP in the embedded hierarchy. DSCs are the standard choice for closed-loop digital control of switch-mode power supplies, where fast deterministic interrupt handling and high-resolution PWM are essential. The GS804 variant belongs to Microchip's SMPS and Digital Power Conversion family (dsPIC33EPxxGS70x/80x). Its headline features are interconnected high-speed PWM modules with dedicated time bases, a high-speed 10/12-bit ADC with Sample-and-Hold and an integrated Programmable Gain Amplifier (PGA), analog comparators, and two CAN bus modules for industrial communication. Architecturally, the device couples the dsPIC33E 16-bit core with dual flash partitioning supporting live firmware updates, DMA for low-overhead data movement between ADC, PWM and RAM, and peripheral interconnection that lets comparator and ADC events trigger PWM fault states in hardware without CPU latency - a decisive advantage in power conversion loops. Typical applications include AC-to-DC converters, power factor correction (PFC) stages, digital DC-DC converters, battery chargers, solar micro-inverters and LED drivers. The CAN interface also makes it suitable for automotive-auxiliary and industrial networking nodes. Design consideration: the 70 MIPS core runs from a 3.3 V supply, so PWM dead-time resolution and ADC sampling must be budgeted against the control-loop period; use Microchip's Digital Compensator design tools for loop tuning. This page synthesizes distributor stock data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128GS804T-I/ML

DSPIC33EP128GS804T-I/ML - 70MIPS Digital Power DSC | Microchip

The Microchip Technology DSPIC33EP128GS804T-I/ML is a 16-bit digital signal controller (DSC) delivering 70 MIPS from 128 KB (43K x 24) flash memory and 8 KB RAM, housed in a 44-pin QFN (8x8 mm) surface-mount package rated for the industrial -40C to +85C temperature range. A digital signal controller combines the computation pipeline of a DSP engine (16-bit multiply-accumulate, DSP instruction set, dual operand fetch) with the peripheral ecosystem of a microcontroller (flash program memory, interrupts, timers, serial communication). In the power-management hierarchy, the dsPIC33EP GS804 family sits in the digital power conversion segment, purpose-built as a programmable control IC that replaces multiple analog control loops in switch-mode power supplies. Key differentiating features include the interconnected high-speed PWM module for multi-phase and multi-loop topologies, a 12-bit ADC paired with programmable gain amplifiers (PGA) and analog comparators, and an integrated CAN peripheral, according to the Microchip product page for the dsPIC33EP128GS804. The device operates from a 3.0V to 3.6V supply, and the GS80X family explicitly supports AC-to-DC converters and other digital switch-mode power supply applications. Architecturally, the device uses dual-partition flash with live-update capability, allowing firmware to run from one partition while the other is reprogrammed - a critical capability for field-updatable power products. The interlocked PWM, ADC and comparator datapath minimizes loop latency, enabling switching frequencies and control bandwidths that pure software-loop MCUs cannot achieve. Typical applications include AC/DC power supplies, LLC resonant converters, power factor correction (PFC) stages, digital lighting ballasts, solar micro-inverters, and battery chargers. Design consideration: budget the 3.3V rail decoupling and VDD/AVDD separation early; the analog PGA and comparator front end requires a quiet AVDD domain to deliver the loop accuracy the PWM module is capable of. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128GS804T-I/PT

DSPIC33EP128GS804T-I/PT - 70MIPS 128KB DSC | Microchip

The Microchip Technology DSPIC33EP128GS804T-I/PT is a 16-bit Digital Signal Controller (DSC) delivering 70 MIPS (70 MHz) performance with 128 KB of Flash memory and 8 KB of RAM, supplied in a 44-pin TQFP (10x10 mm) package on tape and reel. A Digital Signal Controller combines the compute throughput of a DSP core with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC such as this dsPIC33EP device sits at the heart of digital power conversion systems: it closes control loops (voltage, current, power factor) that were traditionally implemented with analog control ICs, replacing hardwired compensation with firmware executed by the DSP engine. Key features include the 16-bit dsPIC33E CPU core with DSP instruction extensions and a 40-bit accumulator, a high-speed interconnected PWM module purpose-built for switch-mode power supplies, an analog front end with high-speed ADC, programmable gain amplifier (PGA) and comparators, and a CAN module for industrial communication. The interconnected PWM architecture supports multi-loop topologies such as LLC, phase-shifted full bridge, AC-DC PFC stages, and buck/boost converters with deterministic phase relationships. Technical depth: the GS80X family is Microchip's digital-power-optimized branch of the dsPIC33EP line. The core runs from a 3.3V supply at up to 70 MIPS, while hardware DSP MAC instructions accelerate control-law computation. Flash is 43K x 24-bit instruction words (128 KB), and self-programming enables field firmware updates of power-conversion firmware. Typical applications include AC-DC power supplies with PFC, DC-DC converters and LLC resonant stages, solar micro-inverters and battery chargers, uninterruptible power supplies, LED drivers, and e-bike/industrial motor control where CAN connectivity is required. Design consideration: budget the 3.3V rail cleanly and use Microchip's Digital Compensator design tools to tune loop gains; the interconnected PWM/ADC routing determines loop latency and must be verified in the datasheet's typical-application guidance. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-23.

Cotação Contato

DSPIC33EP128GS805-I/PT

DSPIC33EP128GS805-I/PT - 16-bit 70MIPS DSC, CAN | Microchip

The Microchip Technology DSPIC33EP128GS805-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS at 3.3V, with 128 KB of dual-partition Flash and 8 KB of RAM, housed in a 48-pin TQFP (7x7 mm) package. A digital signal controller combines the computational throughput of a DSP core with the peripheral integration and deterministic behavior of a microcontroller. Within the power-management hierarchy, the dsPIC33EP GS family sits in the broader class of digital signal processors and 16-bit MCUs, purpose-built for closed-loop control of switch-mode power supplies and motor drives where PWM precision and fast ADC feedback loops are critical. Key features include high-speed interconnected PWM modules with individual PWM timing and dedicated time bases, high-speed 10-bit and 12-bit ADC options with dual Sample-and-Hold circuits, integrated analog comparators and programmable gain amplifiers (PGA), and a CAN 2.0B controller for industrial networking. The 128 KB dual-partition Flash supports live update capability, allowing firmware upgrades while the application continues running. The device executes a modified Harvard architecture instruction set at up to 70 MIPS from a 3.3V supply, with DSP multiply-accumulate instructions enabling fast control-loop mathematics. The interconnected peripheral fabric routes PWM, ADC and comparator signals internally, reducing latency for cycle-by-cycle current limiting in SMPS applications. Typical applications include AC-to-DC converters, digital power supplies, multi-loop SMPS, battery chargers, power factor correction stages, and digital lighting ballasts. The CAN interface also suits automotive and industrial control nodes requiring robust communication. Designers should note the -40C to +85C industrial operating range and program in-circuit via ICSP using tools such as MPLAB SNAP or ICD. The dual-partition Flash simplifies field firmware updates but requires careful linker configuration. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128GS806-I/PT

DSPIC33EP128GS806-I/PT - 16-bit DSC, 70 MIPS, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128GS806-I/PT is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS performance with 128 KB of dual-partition Flash memory with live update capability, 8 KB of RAM, and CAN, I2C, SPI, and UART connectivity in a 64-pin TQFP (10x10 mm) package rated from -40C to +85C. A digital signal controller combines the computational core of a digital signal processor with the peripheral set and ease of use of a microcontroller. In the power-management hierarchy, the dsPIC33EP GS family sits within Microchip's 16-bit MCU/DSC portfolio and is purpose-built for closed-loop control of switch-mode power supplies, where fast deterministic interrupt latency and tightly coupled analog peripherals are essential. Key features include interconnected high-speed PWM modules for multi-phase and complementary power conversion topologies, a 12-bit ADC supporting simultaneous multi-channel sampling for multi-loop control, integrated programmable gain amplifiers (PGA) and analog comparators that close control loops entirely in hardware, and dual-partition Flash enabling live firmware update during operation. Architecturally, the device pairs a pipelined 16-bit CPU with DSP engine (MAC, modulo and bit-reversed addressing) to execute control-law computations in deterministic cycle counts. The analog and PWM interconnect allows peripherals to trigger and respond to each other without CPU intervention, minimizing loop latency in SMPS applications. Typical applications include AC-DC converters, power factor correction (PFC) stages, LLC and flyback supplies, solar micro-inverters, and digital lighting ballasts. The Interleaved PFC reference design from Microchip, producing up to 350W from universal AC input, is based on this family. Design consideration: the GS806 offers multiple PGECx/PGEDx programming pairs - ICSPCLK and ICSPDAT must be used as a matched pair (e.g., PGEC2 with PGED2) when connecting a programmer. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128GS806T-I/PT

DSPIC33EP128GS806T-I/PT - 16-bit 70MIPS DSC 128KB CAN | Microchip

The Microchip Technology DSPIC33EP128GS806T-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS from 128 KB (43K x 24) of flash program memory and 8 KB of RAM, integrated CAN 2.0B, high-speed PWM, ADC with programmable gain amplifier (PGA) and comparators, housed in a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits at the top of the embedded control chain: it executes control-loop firmware (voltage-mode, current-mode, multi-loop), drives power stages through dedicated PWM peripherals, and closes feedback loops through on-chip ADC, PGA and analog comparators, replacing discrete analog control circuitry in switch-mode power supplies. Key features include a 16-bit modified Harvard DSP engine with single-cycle MAC and 40-bit accumulators, interconnected high-speed PWM modules purpose-built for SMPS topologies, a 12-bit ADC with PGA front-end for direct small-signal current sensing, and a CAN module for industrial networking. Operation spans 3.0V to 3.6V over the industrial -40C to +85C temperature range. Architecturally, the GS-series is Microchip's SMPS and digital power conversion family: the PWM, ADC and comparator blocks are interconnected so that fault responses and cycle-by-cycle current limiting occur in hardware with sub-microsecond latency, offloading deterministic protection from software. Typical applications include AC-DC and DC-DC switch-mode power supplies, interleaved power factor correction (Microchip's 350 W interleaved PFC reference design uses this device), digital lighting ballasts, battery chargers, and solar micro-inverters. Design consideration: the core requires a 3.0V to 3.6V supply, so provide a clean 3.3V LDO rail and follow the datasheet decoupling and VDD/VSS pairing guidance to keep ADC noise low. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and FAQ content not found in a single manufacturer datasheet.

Cotação Contato

DSPIC33EP128GS808-E/PT

DSPIC33EP128GS808-E/PT - 16-bit DSC 70MIPS CAN TQFP-80 | Microchip

The Microchip Technology DSPIC33EP128GS808-E/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance from a 128 KB Flash program memory and 8 KB RAM, with CAN 2.0B connectivity, integrated 12-bit high-speed ADC and DAC peripherals, in an extended-temperature (-40C to +125C) 80-pin TQFP (12x12 mm) package operating at 3.3V. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits above general-purpose MCUs and is purpose-built for closed-loop control of switch-mode power supplies, where deterministic multiply-accumulate operations and fast analog-to-digital feedback loops are essential. The dsPIC33EP GS family is Microchip's dedicated digital-power conversion subfamily. Key features of the DSPIC33EP128GS808-E/PT include the 70 MIPS dsPIC DSC core with DSP engine and barrel shifter, high-speed PWM peripherals targeted at SMPS topologies, a 5-channel 12-bit ADC with sample-and-hold capability for simultaneous multi-rail sensing, an integrated 12-bit DAC, and a CAN 2.0B module for automotive and industrial networking. The /PT suffix denotes the 80-lead TQFP tray packaging, while the E suffix specifies the extended operating temperature range of -40C to +125C for demanding environments. Architecturally, the device is based on the proven-on-silicon automotive-grade dsPIC33EP128GS808 core running at 60 MHz CMOS, supporting modified Harvard bus execution with DSP instructions, enhanced flash ECC, boundary-scan (JTAG) support, and on-chip peripherals optimized for 2-pole/2-zero (2P2Z) digital compensator implementations used in digital power loops. Typical applications include AC-DC converters and interleaved power factor correction (PFC) stages up to 350 W, DC-DC converters and point-of-load supplies, digital UPS and solar inverter control, battery chargers, and automotive/industrial CAN-networked control nodes. Design consideration: at 70 MIPS the core draws peak supply current, so a robust 3.3V rail with local decoupling on every VDD/VSS pair and a low-impedance analog ground for the ADC is essential; also confirm Flash erase/write endurance limits if storing calibration data in self-programmed Flash. This page synthesizes distributor availability data, drop-in family alternatives, pricing tiers, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128GS808-I/PT

DSPIC33EP128GS808-I/PT - 16-bit DSC 70MIPS 128KB CAN | Microchip

The Microchip Technology DSPIC33EP128GS808-I/PT is a 16-bit Digital Signal Controller (DSC) delivering 70 MIPS performance with 128 KB of Flash memory and 8 KB of RAM, integrated CAN, and a rich analog/digital peripheral set, housed in an 80-pin TQFP (12x12 mm) package rated from -40C to +85C. A Digital Signal Controller combines the computational architecture of a Digital Signal Processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). In the power-management hierarchy, DSCs occupy the space between general-purpose MCUs and dedicated DSPs, offering multiply-accumulate (MAC) instructions and high-resolution PWM peripherals tailored for closed-loop digital power conversion. Key features of this device include the 70 MIPS dsPIC33EP core with DSP engine, 128 KB self-programming Flash and 8 KB on-chip RAM, dual CAN 2.0B modules for industrial networking, high-speed 12-bit ADCs with up to 4 Msps sampling for simultaneous multi-channel sensing, high-resolution PWM outputs suited to switch-mode power supplies, and multiple UART/SPI/I2C communication ports for system connectivity. Architecturally, the dsPIC33EP GS family is designed specifically for digital power applications such as switch-mode power supplies, power factor correction, and solar inverters. The core executes a modified Harvard architecture with single-cycle MAC and hardware divide support, while the intelligent power peripherals offload timing-critical PWM modulation and fault protection from software, enabling fast loop response and deterministic behavior. Typical applications include digital SMPS and AC-DC power supplies, interleaved power factor correction (PFC) stages up to 350 W as demonstrated in Microchip reference designs, solar micro-inverters, battery chargers, uninterruptible power supplies, and motor control drives. CAN connectivity also makes it suitable for industrial automation nodes and automotive-adjacent control systems within the industrial temperature range. For design, note the device operates at 3.3 V and requires careful decoupling of the multiple VDD/VDDCORE pins; use Microchip's MPLAB X IDE and XC16 compiler with the dsPIC33EP128GS808 Development Board for rapid prototyping, and program via ICSP using tools such as PICkit or ICD. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing unique selection value for engineers.

Cotação Contato

DSPIC33EP128MC202-E/MM

DSPIC33EP128MC202-E/MM - 16-bit DSC, 60 MIPS, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202-E/MM is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS core performance, 128KB (43K x 24) of Flash program memory, and an extended temperature range of -40C to +125C, housed in a 28-pin QFN-S (6x6 mm) exposed-pad package. It operates from a 3.3V supply and integrates motor-control peripherals for precision embedded control. A digital signal controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller. In the power-management hierarchy, the dsPIC33E family sits between general-purpose 16-bit MCUs and dedicated DSPs, offering single-cycle MAC, DSP multiply-divide support, and dual operand fetch within a familiar MCU programming model. DSCs like this device serve as the central processing element in motor drives, power converters, and sensor-fusion systems. Key features include the 16-bit dsPIC DSC core with integrated DSP engine, motor control PWM peripherals, DMA controller, multiple data converter channels (6 channels of 10-bit/12-bit ADC per the Microchip USA product description), in-circuit and in-application programming, two program and two complex data breakpoints, and IEEE 1149.2 compatible JTAG boundary scan. The -E suffix designates the extended -40C to +125C operating temperature range, and the device is automotive AEC-Q100 qualified per datasheets.com part data. Architecturally, the dsPIC33EP core supports pipelined instruction execution, hardware looping, and modulo and bit-reversed addressing for efficient DSP algorithms such as field-oriented control (FOC) transforms. The DMA controller offloads data movement between peripherals and RAM, reducing CPU overhead in high-rate control loops. Multiple PGECx/PGEDx pin pairs support In-Circuit Serial Programming (ICSP) - any pair may be used, but ICSPCLK and ICSPDAT must be used as a matched pair, and all VDD/VSS pins must be connected for programming to succeed. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control, switch-mode power supplies and digital power conversion, automotive auxiliary systems covered by AEC-Q100 qualification, and industrial sensor conditioning where the integrated 12-bit ADC and DSP engine execute filtering and control algorithms deterministically. For design, connect every VDD and VSS pair, pair PGECx/PGEDx correctly for ICSP, and exploit the exposed pad for ground coupling - placing a solid ground plane under the 6x6 mm QFN improves both thermal performance and signal integrity for the ADC reference. This page synthesizes distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including cross-reference guidance and application recommendations.

Cotação Contato

DSPIC33EP128MC202-E/SS

DSPIC33EP128MC202-E/SS - 16-bit 60 MIPS DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128MC202-E/SS is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring a 70 MIPS-class dsPIC33E core running at 60 MIPS/60 MHz, 128 KB (43K x 24) of Flash program memory, 16 KB of RAM, and an extended temperature range of -40C to +125C in a 28-pin SSOP (0.209 in / 5.30 mm width) package. A digital signal controller combines the computational capability of a 16-bit MCU with the hardware DSP engine and precision analog peripherals of a digital signal processor. In the power-management hierarchy of embedded systems, DSCs sit between general-purpose microcontrollers and dedicated DSPs, making them the de-facto standard for closed-loop digital power and motor-control conversion where fast control loops and high-resolution PWM are mandatory. Key features include dual pipelined buses for DSP MAC operations, high-speed PWM modules with complementary outputs and dead-time insertion, an internal fast RC oscillator, multiple PWM/motor-control peripherals, POR, and a watchdog timer. The device operates from a single 3.3 V supply and supports In-Circuit Serial Programming (ICSP) with two program and two complex data breakpoints, plus IEEE 1149.2-compatible JTAG boundary scan. Technical depth comes from the dsPIC33E core architecture: a modified Harvard structure with 16-bit data and 24-bit instructions, hardware divide and DSP multiply-accumulate units, and deterministic interrupt latency - essential attributes when the same silicon closes the current loop of a field-oriented-control (FOC) motor drive at 20-50 kHz. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, solar micro-inverters and power-factor-correction stages, and automotive auxiliary systems (the -E suffix is AEC-Q100 automotive qualified per distributor data). Design consideration: all VDD and VSS pins must be connected, and any PGECx/PGEDx pin pair must be used as a pair for programming - using PGEC2 for ICSPCLK requires PGED2 for ICSPDAT. This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128MC202-H/SO

DSPIC33EP128MC202-H/SO - 16-bit DSC 70 MIPS 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202-H/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with a 70 MIPS dsPIC DSC core, 128KB of Flash program memory and 16KB of RAM, housed in a 28-pin SOIC package (7.50mm body width). A digital signal controller combines the computational strengths of a microcontroller (MCU) with the math acceleration of a digital signal processor (DSP) in a single chip. In the semiconductor hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs: it retains MCU-style peripherals, interrupts and flash memory while adding single-cycle MAC instructions, hardware divide and high-resolution PWM modules. This makes DSCs the default choice for closed-loop control systems where both fast arithmetic and rich peripheral integration are needed. Key features of the DSPIC33EP128MC202-H/SO include the 16-bit modified Harvard dsPIC33E core running up to 70 MIPS, AEC-Q100 qualification for automotive environments, a high-speed 12-bit ADC (1.1 Msps in 10-bit mode with four sample-and-hold circuits, or 500 ksps in 12-bit mode), and up to three comparators with direct ADC connection. The device integrates 5 timers, 4 DMA channels and 3 external interrupts, with six analog inputs available on 28-pin members of the family. Architecturally, the dsPIC33E core uses a pipelined 16-bit datapath with DSP instruction extensions, and the high-speed PWM module with flexible trigger sources is the defining peripheral of the MC (Motor Control) sub-family, distinguishing it from the GP502 general-purpose variant. Independent ADC trigger sources allow tightly synchronized current and voltage sampling inside a PWM period, which is essential for field-oriented motor control and digital power converters. Typical applications include precision motor control (BLDC, PMSM, stepper), switch-mode power supplies and digital lighting, automotive auxiliary systems benefiting from AEC-Q100 qualification, and general embedded control where DSP math is required. The 28-pin SOIC footprint suits cost- and space-conscious control boards. Design consideration: the H temperature suffix denotes harsh-environment operation, and the 3.3V supply requires level translation if interfacing to 5V peripherals; place ADC sampling around PWM edges using the independent trigger sources for best noise performance. This page synthesizes distributor pricing, drop-in alternatives within the same 28-SOIC footprint, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128MC202-I/MM

DSPIC33EP128MC202-I/MM - 70 MIPS DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202-I/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS (60 MHz instruction clock) with 128 KB of Flash program memory and 16 KB of RAM, housed in a 28-pin QFN-S (6x6 mm) exposed-pad package. A digital signal controller combines the computational capability of a digital signal processor with the control peripherals and ease of use of a microcontroller, sitting in the hierarchy DSC -> 16-bit microcontroller -> embedded processor -> system-on-chip. The dsPIC33EP family integrates a DSP engine with single-cycle MAC and 40-bit accumulators alongside standard MCU peripherals, making it a go-to choice for embedded control loops that also require signal processing. Key features include high-speed PWM modules with complementary outputs and dead-time control, an MCPWM unit, quadrature encoder interface (QEI), two on-chip operational amplifiers, three comparators, and a 10-bit ADC - all purpose-built for precision motor control. The device operates from a 3V to 3.6V supply across an industrial temperature range of -40C to +85C (the -I suffix), supports in-circuit serial programming (ICSP) via any PGECx/PGEDx pin pair, and includes IEEE 1149.2-compatible JTAG boundary scan for production test. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, switched-mode power supplies, digital lighting ballasts, and embedded control systems requiring DSP-class math. Design tip: connect all VDD, VSS, AVDD and AVSS pins and use any single PGECx/PGEDx pair consistently for programming - mixing pairs causes ICSP failures. This page adds distributor pricing tiers, verified drop-in alternatives within the same package, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128MC202-I/SO

DSPIC33EP128MC202-I/SO - 16-bit DSC 60MHz 128KB Flash | Microchip

The Microchip DSPIC33EP128MC202-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, combining a 60 MHz dsPIC DSC core (up to 70 MIPS), 128KB of Flash program memory, and 16KB of RAM in a 28-pin SOIC (SO) package with industrial temperature rating (-40C to +85C). A digital signal controller merges the compute power of a DSP with the peripheral integration and interrupt responsiveness of a microcontroller. Within the power management hierarchy of embedded systems, a DSC sits above generic MCUs for math-intensive real-time control loops, making the dsPIC33E family a staple of digital power and precision motor control engineering. Key features include a 16-bit modified Harvard architecture with DSP engine (single-cycle MAC, 40-bit accumulator), high-speed PWM modules purpose-built for motor and power conversion, 4 DMA channels, 5 timers, and 3 external interrupt sources. The integrated enhanced peripherals allow brushless DC, permanent magnet, and other motor types to be controlled without external signal-chain components. Technically, the device executes C and assembly with hardware divide, dual operand fetch, and zero-overhead looping. Its low-power modes (Idle, Sleep, Doze) reduce consumption in battery-aware designs, and the CMOS process supports industrial noise margins. Typical applications include brushless DC motor drives, digital power supplies (PFC, LLC), solar inverters, and sensorless FOC controllers where deterministic 70 MIPS-class throughput and high-resolution PWM are decisive. Design consideration: this part operates at 3.0V-3.6V-class supply rails typical of the family - verify the exact electrical characteristics in the manufacturer datasheet before layout, and budget the 28-pin SOIC thermals for continuous PWM output drive. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP 28-pin family, and practical design notes not found in a single manufacturer datasheet.

Cotação Contato

DSPIC33EP128MC202-I/SP

DSPIC33EP128MC202-I/SP - 70 MIPS 16-bit DSC | Microchip

The Microchip Technology DSPIC33EP128MC202-I/SP is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 128 KB (43K x 24) of Flash program memory, 16 KB of RAM, and an industrial temperature range (-40C to +85C) in a 28-pin SPDIP through-hole package. A digital signal controller combines the compute throughput of a microcontroller with DSP-grade math acceleration in a single chip. Within the power-management hierarchy, the DSC sits above a standard MCU: it adds a hardware DSP engine (single-cycle MAC, dual operand fetch, modulo and bit-reversed addressing) on top of a 16-bit MCU architecture, making it a member of the broader 16-bit microcontroller and digital signal controller category. Key differentiating features include high-speed PWM peripherals purpose-built for motor control (complementary or independent outputs, dead-time insertion, fault inputs), an operating speed of up to 70 MIPS from an internal PLL, and integrated advanced analog peripherals that reduce external component count. The -I suffix denotes the industrial -40C to +85C operating range, and the /SP suffix denotes the 28-pin 300-mil wide-body SPDIP package suited to through-hole assembly. Architecturally, the dsPIC33E CPU executes most instructions in a single cycle at 70 MIPS, with two 40-bit accumulators, 16 x 16 multiply operations, and hardware divide support. Flash program memory is organized in 24-bit instruction words, and in-circuit serial programming (ICSP) plus JTAG boundary scan support production programming and debugging via tools such as PICkit, ICD, and REAL ICE. Typical applications include Brushed DC, Brushless DC (BLDC), permanent-magnet synchronous (PMSM), and stepper motor control, digital power supplies (power factor correction, DC-DC converters), and embedded control systems requiring DSP filtering, such as sensor signal processing. The through-hole DIP package makes the part especially popular in prototyping, education, and repairable industrial equipment. Design consideration: the dsPIC33E core requires an external low-ESR capacitor on the internal regulator output (VCAP/VDDCORE pin); this capacitor is mandatory for stable operation and must not be omitted. All VDD/VSS pairs must be connected even on simplified designs, and PGECx/PGEDx pins must be used as matched pairs during programming. This page synthesizes verified distributor data, drop-in family alternatives, pricing tiers, and practical design notes beyond what a single datasheet page provides.

Cotação Contato

DSPIC33EP128MC202-I/SS

DSPIC33EP128MC202-I/SS - 16-bit 70 MIPS DSC 128KB | Microchip

The Microchip Technology DSPIC33EP128MC202-I/SS is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 128 KB (43K x 24) of Flash program memory, 16 KB of RAM, and a 60 MHz operating clock in a 28-pin SSOP surface-mount package. A digital signal controller combines the fast interrupt response and deterministic behavior of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy of embedded systems, the dsPIC33E family sits between general-purpose PIC24 microcontrollers and dedicated DSPs, providing a single-chip solution for control loops that need both math throughput and rich analog integration. Microchip positions this family specifically for precision motor control, where a 70 MIPS dsPIC DSC core with integrated DSP and enhanced on-chip peripherals enables high-performance closed-loop control. Key features of the DSPIC33EP128MC202 include the 16-bit modified Harvard architecture with DSP instruction support, 128 KB of self-programmable Flash for field firmware updates, and industrial temperature operation from -40C to +85C (the /I temperature code). The 28-SSOP package suits cost- and space-sensitive control boards that still need a dedicated controller. The dsPIC33EP core couples the CPU with high-speed peripherals targeted at power conversion and motion: advanced PWM capability for inverter and converter stages, plus on-chip analog for sensing feedback. Peripherals are supported by Microchip MPLAB X IDE, the XC16 compiler, and hardware debugging tools, so designs can be developed and reused across the dsPIC33EP family. The device is programmed in-circuit through PGECx/PGEDx pin pairs - any pair can be used, but ICSPCLK and ICSPDAT must be taken from the same pair, and all VDD/VSS pins must be connected for programming to succeed. Typical applications include brushless DC and PMSM motor drives for industrial automation, digital power supplies and inverters, metering systems, IoT embedded nodes, and general industrial control boards that benefit from DSP-style math on a microcontroller. Design consideration: pin multiplexing on a 28-pin device is intensive - peripherals share pins through the Peripheral Pin Select (PPS) scheme, so map the PWM, UART, and ADC channels early in schematic capture and reserve one PGECx/PGEDx pair plus MCLR for ICSP access. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-23.

Cotação Contato

DSPIC33EP128MC202T-E/MM

DSPIC33EP128MC202T-E/MM - 16-bit 60 MIPS DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202T-E/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance from 128 KB (43K x 24) of Flash program memory and 16 KB of RAM in a 28-pin QFN-S (6x6 mm) package. A digital signal controller combines the computational capability of a microcontroller with the math throughput of a DSP engine. Within the power-management hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs, making it a single-chip solution for embedded control systems that need both real-time control loops and signal-processing tasks. Key features include an enhanced 16-bit dsPIC DSC core with integrated DSP instruction support, dedicated motor-control peripherals such as MCPWM and QEI (quadrature encoder interface), two on-chip op-amps and three comparators, and a peripheral trigger generator (PTG). Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus, enabling flexible communication with drives, sensors, and host systems. Technically, the device integrates a high-performance PWM module purpose-built for brushless DC, permanent-magnet synchronous, AC induction, and stepper motor control. The DSP engine with single-cycle MAC, dual working register arrays, and hardware division support FOC (field-oriented control) algorithms while the analog front-end (op-amps, comparators, ADC) closes current loops without external amplifiers. Typical applications include precision motor drives, digital power supplies, industrial automation nodes, automotive auxiliary systems, and sensor fusion in embedded control. The wide peripheral set allows a single DSC to replace MCU-plus-external-PWM-controller designs. When designing with this part, budget the VCAP/VDDCORE pin with the recommended low-ESR capacitor, and verify the -40C to +125C extended (E) temperature grade against your application environment. This page synthesizes distributor availability, same-footprint drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128MC202T-E/SO

DSPIC33EP128MC202T-E/SO - 16-bit 60 MIPs DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202T-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP 33EP motor-control family, delivering 60 MIPs of performance with 128KB (43K x 24) of FLASH program memory, 16KB of RAM, and an extended -40C to +125C operating range in a 28-pin SOIC (7.50 mm width) package. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the mathematical throughput of a DSP core. Within the power-management hierarchy, DSCs occupy the space between general-purpose MCUs and dedicated DSPs, making them the preferred choice for closed-loop control loops such as field-oriented motor control, digital power conversion, and embedded sensing where fast multiply-accumulate operations and deterministic interrupt latency are required. Key features include the AEC-Q100 qualification that makes this E-grade part suitable for automotive environments, a 3.3 V supply rail, and integrated DSP engine instructions that accelerate control algorithms. The wide temperature rating (E suffix, -40C to +125C) distinguishes it from the standard I-grade (-40C to +85C) variant in the same package. Architecturally, the dsPIC33EP core pairs a pipelined 16-bit CPU with hardware DSP MAC instructions, and the MC (motor control) variant adds peripheral sets oriented toward PWM generation and analog feedback acquisition, enabling single-chip control of brushless DC (BLDC), permanent-magnet synchronous (PMSM), and AC induction motors. Typical applications include precision BLDC and PMSM motor drives, automotive auxiliary motor and actuator control, solar micro-inverters and digital power supplies, and industrial automation nodes requiring both signal processing and real-time control. Design consideration: at 60 MIPs the core requires a 3.3 V rail within tolerance; verify decoupling on all VDD/VSS pin pairs and confirm the exact RAM size against the current revision of the manufacturer datasheet before finalizing linker scripts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato

DSPIC33EP128MC202T-I/MM

DSPIC33EP128MC202T-I/MM - 16-bit DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EP128MC202T-I/MM is a 16-bit digital signal controller (DSC) with a dsPIC33EP core running at up to 70 MIPS, 128KB (43K x 24) of Flash program memory, 16KB of RAM, and a 28-pin QFN-S (6x6 mm) package with exposed pad, supplied in Tape & Reel packing. A digital signal controller combines the compute power of a DSP with the peripheral set and ease of use of a microcontroller. In the power-management hierarchy, the dsPIC33EP family sits above general-purpose MCUs and below standalone DSPs, integrating motor-control peripherals, analog blocks, and communications in a single chip. This makes DSCs the standard choice for digital power conversion, precision motor control, and embedded sensing. Key features include a 16-bit modified Harvard architecture core, dual on-chip op amps (MCPWM per distributor data: motor control PWM), output-compare modules, comparators, and peripherals such as DMA, I2C, SPI, UART/IrDA/LIN, and QEI quadrature encoder interfaces per Microchip product information. JTAG/IEEE 1149.2 boundary scan and in-circuit programming (ICSP) support development and production programming. Industrial temperature rating covers -40C to +85C. Technically, the dsPIC33EP core features DSP multiply-accumulate instructions, fixed-point arithmetic support, and flexible interrupt vectoring, enabling fast control-loop execution for field-oriented motor control at kHz rates. Flash self-programming supports field firmware updates, and the watch-dog timer plus low-voltage detect protect against brownout conditions. Typical applications include brushless DC and PMSM motor control, digital power supplies (LLC, PFC), solar micro-inverters, and industrial sensors that combine analog signal conditioning with communications. A key design consideration: the 28-pin QFN exposed pad must be soldered to a ground plane for thermal dissipation and EMC; budget I/O carefully since motor-control designs typically need PWM pairs, encoder inputs, and at least one UART simultaneously. This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, drop-in same-package alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato

Subcategorias

Produtos (39.000+)

DSPIC33EP128GS705-E/PT - 70 MIPS 16-bit DSC 128KB | Microchip

DSPIC33EP128GS705-I/PT - 16-Bit 70 MIPS DSC 128KB | Microchip

DSPIC33EP128GS706T-I/PT - 16-bit 70 MIPS DSC 128KB Flash | Microchip

DSPIC33EP128GS708-E/PT - 16-bit DSC 70 MIPS 128KB Flash | Microchip

DSPIC33EP128GS804-E/PT - 16-bit 70 MIPS DSC | Microchip

DSPIC33EP128GS804-I/ML - 16-bit 70 MIPS DSC | Microchip

DSPIC33EP128GS804-I/PT - 16-bit 70MIPS Digital Power DSC | Microchip

DSPIC33EP128GS804T-I/ML - 70MIPS Digital Power DSC | Microchip

DSPIC33EP128GS804T-I/PT - 70MIPS 128KB DSC | Microchip

DSPIC33EP128GS805-I/PT - 16-bit 70MIPS DSC, CAN | Microchip

DSPIC33EP128GS806-I/PT - 16-bit DSC, 70 MIPS, 128KB Flash | Microchip

DSPIC33EP128GS806T-I/PT - 16-bit 70MIPS DSC 128KB CAN | Microchip

DSPIC33EP128GS808-E/PT - 16-bit DSC 70MIPS CAN TQFP-80 | Microchip

DSPIC33EP128GS808-I/PT - 16-bit DSC 70MIPS 128KB CAN | Microchip

DSPIC33EP128MC202-E/MM - 16-bit DSC, 60 MIPS, 128KB Flash | Microchip

DSPIC33EP128MC202-E/SS - 16-bit 60 MIPS DSC 128KB | Microchip

DSPIC33EP128MC202-H/SO - 16-bit DSC 70 MIPS 128KB Flash | Microchip

DSPIC33EP128MC202-I/MM - 70 MIPS DSC, 128KB Flash | Microchip

DSPIC33EP128MC202-I/SO - 16-bit DSC 60MHz 128KB Flash | Microchip

DSPIC33EP128MC202-I/SP - 70 MIPS 16-bit DSC | Microchip

DSPIC33EP128MC202-I/SS - 16-bit 70 MIPS DSC 128KB | Microchip

DSPIC33EP128MC202T-E/MM - 16-bit 60 MIPS DSC 128KB Flash | Microchip

DSPIC33EP128MC202T-E/SO - 16-bit 60 MIPs DSC, 128KB Flash | Microchip

DSPIC33EP128MC202T-I/MM - 16-bit DSC, 128KB Flash | Microchip