Circuitos Integrados

LM324F-E2

LM324F-E2 - 4-Channel 3-32V Op Amp | ROHM Semiconductor

ROHM Semiconductor LM324F-E2 is a four-circuit ground-sense operational amplifier in a 14-SOP package. The device is designed for general-purpose signal-conditioning applications using a 3 V to 32 V supply, with four independent amplifier channels and internally frequency-compensated operation. Its 14-pin package supports integration into industrial control, instrumentation, sensor interface, and analog signal-processing equipment. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs while providing feedback control of gain and bandwidth. The quad-amplifier configuration combines four independent channels in one package, reducing board area and simplifying multi-channel designs. The LM324F family belongs to the operational-amplifier hierarchy, which includes general-purpose amplifiers, instrumentation amplifiers, buffer amplifiers, and analog signal-conditioning ICs. The principal features of the LM324F-E2 include four amplifier circuits in one package, a 3 V to 32 V operating supply range, and a 14-SOP surface-mount package. Ground-sense operation makes the device applicable where signals are referenced to the system ground and the amplifier must tolerate operation from a single positive supply. The four-channel architecture is particularly useful when a board requires several similar low-frequency signal paths. Internally frequency compensation allows each amplifier to operate as a stable closed-loop gain stage without external compensation components. This characteristic supports standard inverting, non-inverting, summing, differential, buffer, and feedback-control circuits. Designers should still verify gain-bandwidth, output swing, input common-mode range, slew rate, and output-current behavior against the manufacturer datasheet for the selected operating voltage and load. Typical applications include four-channel sensor conditioning, industrial transducer interfaces, low-frequency control loops, instrumentation buffering, current-to-voltage conversion, and general analog measurement systems. The four channels may be used independently for different signal paths or combined in multi-stage circuits when signal polarity, biasing, and loading permit. The 3 V to 32 V supply range is useful for equipment operating from low-voltage electronics through higher industrial rails. The principal design consideration is ensuring that every input, output, and bias point remains inside the electrical limits for the intended supply. Decoupling capacitors should be placed close to the power pins, the unused amplifier in a quad package should be configured according to the manufacturer guidance, and PCB traces should minimize coupling between high-gain and sensitive input nodes. Confirm the exposed package details and pin assignments on the official LM324F datasheet before layout release. This product page combines the LM324F-E2 package and operating information with application guidance, replacement analysis, and design-focused comparisons. It is intended to help engineers identify the correct amplifier function, verify footprint compatibility, and plan PCB implementation without relying on a distributor summary alone.

Cotação Contato

LM324F-GE2

LM324F-GE2 - 3-32V Quad Ground-Sense Op Amp | ROHM

ROHM Semiconductor LM324F-GE2 is a four-circuit, ground-sense operational amplifier designed for single-supply operation from 3 V to 32 V, or dual-supply operation from ±16 V to ±32 V. The device is packaged in a 14-pin SOP and is not recommended for new designs, making it primarily relevant to maintenance, repair, and continuation of existing qualified equipment. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to compare an input signal with a feedback network. The LM324F family is a ground-sense amplifier, placing emphasis on input and output voltage-range behavior near the lower supply rail. Four amplifiers are integrated into one package, reducing board area in designs requiring multiple general-purpose analog channels. Key characteristics include four amplifier circuits, a 3 V to 32 V single-supply range, a ±16 V to ±32 V dual-supply description, ground-sense input and output operation, and operation from a 14-pin SOP package. Low current consumption and a wide operating-voltage range support battery-powered, industrial-control, instrumentation, and signal-conditioning equipment where component count and supply flexibility are important. The LM324F architecture provides four general-purpose amplifier sections rather than a dedicated high-speed or precision design. Its supply tolerance allows operation from conventional low-voltage rails through substantially higher industrial bus voltages, subject to the absolute maximum ratings and application limits stated in the manufacturer datasheet. Ground-sense behavior should be reviewed carefully when the input source approaches ground or when the output must remain close to the lower rail. Typical uses include DC signal amplification, sensor conditioning, current-loop receivers, sample-and-hold circuits, comparators with external feedback, low-voltage audio stages, and general instrumentation. The four-amplifier arrangement is particularly useful when a design requires several channels with similar voltage ranges and supply requirements within one compact package. Designers should confirm the complete pin assignment, input-common-mode limits, output-swing limits, output-current capability, stability requirements, and bypass-capacitor recommendations in the manufacturer datasheet before layout release. Because the manufacturer marks LM324F as not recommended for new designs, production quantities and availability should be confirmed through the Request a Quote form before committing a new build. This product page consolidates lifecycle guidance, package details, sourcing instructions, replacement analysis, and application-oriented engineering guidance. It also distinguishes the original ground-sense LM324F device from alternatives that share the 14-pin SOP footprint but may differ in supply range, output-stage design, or qualification status.

Cotação Contato

LM324FVJ-E2

LM324FVJ-E2 - 4-Channel 3-32V Op Amp | ROHM

ROHM Semiconductor LM324FVJ-E2 is a four-circuit, general-purpose operational amplifier designed for ground-sense signal conditioning in a 14-pin TSSOP-BJ package. The device operates from a 3 V to 32 V supply according to the Mouser product listing. Its four internal amplifiers support applications that require several independent analog channels in one package, while the ground-sense architecture is intended for measurements referenced close to the source signal. ROHM identifies the LM324FVJ as Not Recommended for New Designs, so it should be selected primarily for maintenance, continuity, or previously validated designs rather than new platform development. An operational amplifier is an analog integrated circuit that compares two input voltages and amplifies their difference. A ground-sense operational amplifier is designed to minimize errors caused by ground currents, especially when the input signal is close to the amplifier supply ground. Within the broader hierarchy, this component is a four-channel general-purpose operational amplifier, placing it among linear amplifiers and analog signal-conditioning ICs. Integrating four amplifiers into one package can reduce board area and simplify multi-channel instrumentation layouts. The principal documented features of the LM324FVJ-E2 are its four amplifier circuits, 3 V to 32 V operating-supply range, general-purpose classification, and 14-TSSOP-BJ surface-mount package. The ground-sense configuration is particularly relevant to sensor interfaces, transducer monitoring, and analog measurement systems where the signal source may sit near ground potential. Because the device is not recommended for new designs, engineers should verify current availability, environmental requirements, and any redesign requirements through the Request a Quote form before committing a new production release. Architecturally, the part combines four amplifiers in one multi-channel package. The wide 3 V to 32 V listed supply range allows operation from conventional low-voltage rails through substantially higher industrial-style rails, provided the circuit remains within every absolute-maximum and operating condition listed in the manufacturer documentation. Ground-sense behavior should be evaluated with the actual source impedance, return-current path, signal bandwidth, and bypass network because PCB grounding errors can dominate the useful accuracy of the measurement chain. Typical uses include four-channel sensor conditioning, low-level analog measurement, industrial control interfaces, instrumentation buffering, and signal amplification referenced to an analog ground. In these applications, the four channels can process related inputs or provide independent gain stages. The common 14-TSSOP-BJ package also allows routing and assembly practices compatible with other fine-pitch surface-mount operational amplifiers, provided designers verify the pinout and land pattern rather than relying only on package dimensions. For robust implementation, place input and supply bypass capacitors close to their associated pins, keep sensitive input traces short, and return amplifier ground currents through a path that avoids high-current load currents. The main engineering tradeoff is lifecycle suitability: the LM324FVJ-E2 offers a familiar ground-sense quad-amplifier format but is marked Not Recommended for New Designs, so a new design should weigh continuity against the use of a currently recommended amplifier family.

Cotação Contato

LM324J

LM324J - Quad 32 V 1 MHz Op Amp | Texas Instruments

The Texas Instruments LM324J is a low-power, general-purpose, quad operational amplifier built for single-supply operation across a wide voltage range. Each of its four amplifiers is intended for 32 V maximum supply operation and 1 MHz gain-bandwidth performance, while the J package is a 14-pin ceramic dual in-line package identified by the verified DigiKey listing. The device combines four amplifiers in one package, making it useful when several independent analog stages must fit on a relatively compact board. An operational amplifier is an active analog component that uses high open-loop gain and negative feedback to amplify the difference between two input signals. In the broader electronics hierarchy, an op amp belongs to amplifier ICs and analog signal-chain devices. The LM324 family supports common general-purpose tasks including voltage buffering, summing, comparison, filtering, transducer conditioning, and gain stages, provided the designer observes its supply, input, output, and stability limits. Verified distributor information identifies the LM324J as a standard, general-purpose, four-circuit amplifier in a 14-CDIP package. The Mouser listing further identifies it as a military quad operational amplifier with 32 V operation and 1 MHz bandwidth. Those confirmed points establish the device’s most important selection criteria: four integrated channels, wide single-supply capability, roughly 1 MHz bandwidth, and a through-hole ceramic DIP footprint for higher-temperature or ruggedized legacy-style assemblies. Each amplifier shares the same positive supply, negative supply, and ground pins on the 14-pin package. The common architecture saves board area and reduces package count compared with four separate single op-amp ICs. It also makes rail planning and decoupling straightforward: the designer must ensure that all four channels remain within their electrical limits simultaneously and that power-supply bypass capacitors are placed close to the package supply pins. Typical uses include industrial control interfaces, sensor signal conditioning, low-frequency active filters, audio preamplification, instrumentation, power-supply feedback, and general mixed-signal embedded systems. The 1 MHz bandwidth favors low- to moderate-frequency signals rather than high-speed video, RF, or precision signal-path work. For those applications, verify exact gain-bandwidth, slew-rate, input-offset, output-current, and temperature limits against the official LM324 manufacturer documentation before production release. The principal design consideration is ensuring adequate output-voltage headroom and stability at the selected supply voltage, load, and gain. Because the verified excerpts do not publish exact capacitor values, common-mode limits, output-current ratings, or full pin names, those details remain deliberately unstated rather than guessed. This page combines verified sourcing data, package information, application guidance, and a conservative interpretation of the LM324J’s general-purpose role. Its differentiation is practical rather than headline performance: one 14-CDIP package supplies four general-purpose amplifier channels, while the 32 V and 1 MHz figures cover common industrial and embedded signal-conditioning needs. For an existing 14-pin LM324-family footprint, engineers should still compare the exact suffix, grade, pinout, and operating-temperature limits before approving a substitute.

Cotação Contato

LM324KD

LM324KD - Quad 30V 1.2MHz Op Amp | Texas Instruments

The Texas Instruments LM324KD is a quad general-purpose operational amplifier rated for supply voltages up to 30 V, with a gain-bandwidth product of 1.2 MHz and improved 2 kV ESD protection. The device contains four independent, frequency-compensated amplifiers in a 14-pin SOIC package measuring 0.154 inch, or 3.90 mm, wide. Its combination of single- or dual-supply operation, low input bias current, and broad supply range makes it suitable for general-purpose analog signal conditioning. An operational amplifier, or op amp, is a high-gain differential amplifier used within the wider voltage-amplifier and analog IC hierarchy. LM324-family devices are commonly used for buffering, voltage amplification, current-to-voltage conversion, filtering, comparators, and instrumentation interfaces. Unlike rail-to-rail precision amplifiers, the LM324 uses conventional bipolar input stages and includes internal compensation, allowing straightforward use without an external frequency-compensation network. The LM324KD provides four amplifiers in one package, reducing board area and simplifying designs that require multiple similar analog channels. Its verified supply capability covers 3 V to 32 V for single-supply operation and ±1.5 V to ±16 V for dual-supply operation. The listed per-channel output current capability is 60 mA, while the input bias current is listed as 20 nA. The 1.2 MHz gain-bandwidth product supports moderate-bandwidth closed-loop applications. Each channel is independent and can operate with common input ranges that include ground, making single-supply sensing of signals near 0 V practical. The LM324K family also incorporates improved 2 kV ESD protection, an important consideration for exposed sensor, interface, and control boards. The internal architecture prioritizes forgiving general-purpose operation rather than the low offset, low drift, and rail-to-rail performance expected from precision or modern energy-efficient amplifier families. Typical uses include low-frequency sensor amplifiers, buffered analog inputs, audio preamplification, loop-filter sections, motor and industrial control interfaces, and general instrumentation. The 14-pin SOIC package supports conventional surface-mount assembly, while the four-amplifier configuration can implement two differential channels, four single-ended channels, or a mixture of amplifiers and comparators. Designers should preserve adequate input and output common-mode range, account for the typical 0.5 uA supply current, and verify operation across the full industrial supply range. Decoupling close to the positive and ground pins is recommended, and signal routing should minimize parasitic capacitance around high-impedance input nodes. The published 24-page datasheet and manufacturer product page should be consulted for the complete electrical limits, pin configuration, and test conditions. This page combines verified manufacturer and distributor information, current pricing, package and pinout details, drop-in replacement evidence, and application-focused design guidance. It is intended to help engineers compare the LM324KD with other LM324-family choices while preserving PCB footprint, supply-voltage, and signal-chain compatibility.

Cotação Contato

LM324KDR

LM324KDR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)

The Texas Instruments LM324KDR is a quad general-purpose operational amplifier rated for supply voltages up to 30 V, with a gain-bandwidth product of 1.2 MHz and improved 2 kV ESD protection. The device contains four independent, frequency-compensated amplifiers in a 14-pin SOIC package measuring 0.154 inch, or 3.90 mm, wide. Its combination of single- or dual-supply operation, low input bias current, and broad supply range makes it suitable for general-purpose analog signal conditioning. An operational amplifier, or op amp, is a high-gain differential amplifier used within the wider voltage-amplifier and analog IC hierarchy. LM324-family devices are commonly used for buffering, voltage amplification, current-to-voltage conversion, filtering, comparators, and instrumentation interfaces. Unlike rail-to-rail precision amplifiers, the LM324 uses conventional bipolar input stages and includes internal compensation, allowing straightforward use without an external frequency-compensation network. The LM324KDR provides four amplifiers in one package, reducing board area and simplifying designs that require multiple similar analog channels. Its verified supply capability covers 3 V to 32 V for single-supply operation and ±1.5 V to ±16 V for dual-supply operation. The listed per-channel output current capability is 60 mA, while the input bias current is listed as 20 nA. The 1.2 MHz gain-bandwidth product supports moderate-bandwidth closed-loop applications. Each channel is independent and can operate with common input ranges that include ground, making single-supply sensing of signals near 0 V practical. The LM324K family also incorporates improved 2 kV ESD protection, an important consideration for exposed sensor, interface, and control boards. The internal architecture prioritizes forgiving general-purpose operation rather than the low offset, low drift, and rail-to-rail performance expected from precision or modern energy-efficient amplifier families. Typical uses include low-frequency sensor amplifiers, buffered analog inputs, audio preamplification, loop-filter sections, motor and industrial control interfaces, and general instrumentation. The 14-pin SOIC package supports conventional surface-mount assembly, while the four-amplifier configuration can implement two differential channels, four single-ended channels, or a mixture of amplifiers and comparators. Designers should preserve adequate input and output common-mode range, account for the typical 0.5 uA supply current, and verify operation across the full industrial supply range. Decoupling close to the positive and ground pins is recommended, and signal routing should minimize parasitic capacitance around high-impedance input nodes. The published 24-page datasheet and manufacturer product page should be consulted for the complete electrical limits, pin configuration, and test conditions. This page combines verified manufacturer and distributor information, current pricing, package and pinout details, drop-in replacement evidence, and application-focused design guidance. It is intended to help engineers compare the LM324KDR with other LM324-family choices while preserving PCB footprint, supply-voltage, and signal-chain compatibility.

Cotação Contato

LM324KN

LM324KN - Quad 14-PDIP General-Purpose Op Amp | Texas Instruments

Texas Instruments LM324KN is a four-circuit general-purpose operational amplifier in a 14-pin PDIP package. The device combines four independent, internally frequency-compensated amplifiers with an operating supply range extending to 36 V, a typical low supply-current drain of 0.8 mA, and input common-mode operation that includes ground. It is designed for single-supply or split-supply operation and includes 2 kV ESD protection. An operational amplifier is an analog signal-conditioning IC that uses feedback to control gain, amplify differential inputs, buffer sensors, and perform general-purpose analog calculations. The LM324 family belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its common-mode input range includes ground, making it useful in circuits powered from a positive rail and sensing signals near 0 V. The four independent channels can perform simultaneous amplification, filtering, buffering, or summing functions while sharing one package. Internal frequency compensation makes the LM324 suitable for general-purpose closed-loop amplifier designs without external compensation networks. Its low 0.8 mA typical supply-current drain helps reduce system power consumption, while the broad supply capability supports industrial and legacy equipment operating from multiple rail voltages. Common applications include sensor-signal conditioning, low-level current-to-voltage conversion, audio preamplification, active filtering, comparators with additional biasing, and general instrumentation. The 14-pin PDIP format also supports manual assembly and through-hole prototyping in laboratories, educational equipment, industrial control systems, and repair products. When designing an LM324KN circuit, verify input and output voltage limits against the selected operating rail, including output swing limitations when driving capacitive loads. Place input compensation or bias resistors close to the relevant amplifier pins, keep feedback loops short, and provide stable bypassing at the supply pins to limit noise and prevent oscillation. This product page combines the LM324KN package and feature information with practical analog-design guidance, application context, verified alternatives, and a parameter comparison for faster component selection.

Cotação Contato

LM324M

LM324M - Low-Power Quad Op Amp | Texas Instruments

The Texas Instruments LM324M is a low-power, general-purpose quad operational amplifier containing four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin SOIC package. The verified source identifies the device as a standard four-circuit amplifier designed for operation from a single power supply over a wide voltage range. Because exact electrical ratings were not included in the supplied source data, values such as supply voltage, gain-bandwidth product, input bias current, and output-current limits remain subject to confirmation in the manufacturer datasheet. An operational amplifier is an analog signal-processing IC that uses high open-loop gain to amplify the difference between two inputs. Negative feedback establishes a stable closed-loop gain and bandwidth. The LM324 family belongs to the broader quad-operational-amplifier hierarchy: operational amplifier, analog amplifier, linear amplifier, and integrated circuit. Its four internally compensated channels can amplify AC or DC signals when supported by suitable biasing, decoupling, feedback, and output-loading conditions. The principal feature of LM324M is integration. Four amplifiers in one 14-pin SOIC reduce package count and simplify common dual-rail or single-supply analog boards. Internal frequency compensation means each channel does not require a separate compensation network for ordinary closed-loop operation. The verified manufacturer result specifically describes LM324 as low-power and optimized for single-supply operation, while the distributor result classifies LM324M as a standard general-purpose instrumentation and buffer amplifier. The four channels are intended for independent signal-conditioning tasks. Typical functions include noninverting and inverting amplification, voltage buffering, active filtering, cross-coupled analog networks, and sensor-signal conditioning. Internal compensation supports unity-gain buffer use, but stability, output swing, input common-mode range, slew rate, noise, and usable bandwidth must be checked against the actual circuit. A low-power general-purpose amplifier may not be suitable when very wide bandwidth, very low offset, low noise, rail-to-rail input/output, or high capacitive-drive capability is required. A practical single-supply design must establish a suitable input common-mode voltage and output bias point. Bypass the power pin close to the IC, route traces to avoid feedback around unintended paths, and avoid excessive capacitive loading on an output. Because the provided search result does not include verified temperature, RoHS, REACH, or package-dimension details, those specifications should be taken from the official LM324 documentation before release to production. Typical uses include low-frequency sensor conditioning, buffered instrumentation, active filters, classroom electronics, industrial control blocks, and general analog signal chains. This page summarizes the verified product identity and package, provides practical design guidance, distinguishes confirmed facts from missing ratings, and directs buyers to the official product page for complete electrical and qualification data.

Cotação Contato

LM324MT

LM324MT - Low-Power Quad Op Amp, 14-TSSOP | Texas Instruments

Texas Instruments LM324MT is a low-power quad operational amplifier designed for single-supply operation across a wide voltage range. The device integrates four amplifier channels in a 14-pin TSSOP package, and the listed temperature range is 0°C to 70°C. Its quad-channel configuration reduces the number of amplifiers and packages required in designs that need multiple independent analog signal paths. An operational amplifier is a voltage-gain device used to amplify, buffer, filter, or compare analog signals. A quad operational amplifier contains four amplifiers in one integrated circuit. Within the signal-chain hierarchy, an operational amplifier belongs to the amplifier-IC family and, more broadly, to analog and mixed-signal semiconductor devices. The LM324MT is designed for applications operating from a single power supply, which simplifies circuit design in systems without a negative supply rail. The LM324MT provides four amplifier sections in one 14-TSSOP package. Its low-power operating concept is useful when four analog channels are required in compact equipment. The 0°C to 70°C rating identifies it as a commercial-temperature device, so system designers should verify that the enclosure temperature remains within this range. The manufacturer identifies the LM324 as a low-power quad operational amplifier intended for single power-supply operation. Compared with discrete single amplifier packages, integrating four amplifiers into one TSSOP-14 package can simplify assembly and conserve board area. Designers should still account for shared supply pins, input bias currents, output-current limits, input common-mode range, output swing, stability with the selected load, and the behavior of unused amplifier channels. These operating limits must be confirmed against the manufacturer datasheet for the selected electrical grade and package. Typical uses include four-channel sensor conditioning, buffered analog measurement, low-frequency active filtering, voltage comparison, general-purpose signal amplification, and educational or laboratory analog circuits. The single-supply architecture is particularly useful in battery-powered and compact embedded systems where a negative rail is unavailable. Input and output signal ranges must remain within the limits required by the circuit. Layout should place input components close to the associated amplifier pins and maintain short feedback paths. Bypass the supply pins with a suitable local decoupling network, keep sensitive inputs away from switching nodes and high-current return paths, and account for the thermal limits of the TSSOP package. Unused amplifier inputs should be connected to a defined common-mode potential rather than left floating. This product page combines the manufacturer product information, distributor package identification, cross-reference results, application guidance, and a practical comparison of same-package LM324-family choices. It is designed to help engineers evaluate the LM324MT for signal-conditioning and general analog applications while making package and sourcing requirements explicit.

Cotação Contato

LM324MTX/NOPB

LM324MTX/NOPB - Quad 1 MHz Op Amp | Texas Instruments

Texas Instruments LM324MTX/NOPB is a low-power, general-purpose quad operational amplifier containing four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin TSSOP package. The device supports a single-supply operating range of 3 V to 32 V and provides a gain-bandwidth product of 1 MHz with a slew rate of 0.3 V/µs. Each amplifier can source up to 40 mA, making this device suitable for general signal-conditioning and low-to-moderate-frequency analog systems. An operational amplifier is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare analog signals. The LM324 family belongs to the operational-amplifier hierarchy within analog ICs and analog signal-chain components. Its internal frequency compensation removes the need for external compensation networks in conventional closed-loop gain configurations, simplifying implementation in general-purpose amplifier boards. The quad configuration provides four amplifiers in one package, reducing PCB area and component count in designs requiring multiple analog channels. Key electrical characteristics include 1 MHz gain-bandwidth product, 0.3 V/µs slew rate, 20 nA input bias current, and 1 mV input offset voltage. The output stage can supply up to 40 mA per channel, while the low-power architecture supports portable and single-supply systems operating from 3 V to 32 V. Internal frequency compensation makes the amplifier suitable for voltage gains near unity without external compensation capacitors. The 1 MHz bandwidth places the device in the general-purpose, low-to-moderate-frequency class rather than the precision or high-speed class. Designers should account for finite bandwidth and slew rate when processing larger or faster signals, and should verify output swing against the selected supply voltage before driving a load. Typical uses include four-channel sensor conditioning, low-frequency active filters, general-purpose signal buffers, differential-to-single-ended conversion, and instrumentation interfaces. The four independent channels can also be configured as two differential amplifiers when signal polarity relationships require it. The 14-TSSOP package is appropriate for compact surface-mount assemblies, although its narrow lead pitch requires careful PCB layout and inspection. For reliable layout, route input and feedback connections away from switching nodes and high-current return paths. Place input-biasing resistors close to the amplifier inputs to reduce leakage sensitivity, and use short feedback traces to minimize parasitic capacitance. Because this is a general-purpose amplifier rather than a rail-to-rail precision device, input common-mode range and output swing must be checked in the actual supply configuration. This page combines the LM324MTX/NOPB electrical characteristics, package information, drop-in alternatives, comparison data, and practical PCB guidance to support faster component selection and implementation. Use the manufacturer pin-description table and recommended operating conditions when assigning PCB tracks and validating signal headroom.

Cotação Contato

LM324MX

LM324MX - Low Power Quad Op Amp, 3V-32V, 14-SOIC | Texas Instruments

The Texas Instruments LM324MX is a low power, general-purpose quad operational amplifier with four independent amplifiers in a 14-pin SOIC package. It operates from 3 V to 32 V single supply or up to plus or minus 16 V dual supply, delivering a large DC voltage gain of 100 dB with 7 mV input offset voltage and 65 dB minimum common mode rejection ratio. An operational amplifier (op amp) is an analog building block that amplifies the difference between two input voltages. The LM324 belongs to the hierarchy of single-supply general-purpose amplifier -> quad operational amplifier -> analog signal conditioning IC -> semiconductor. Internally frequency compensated for unity gain, it needs no external compensation network, which is why it remains the default amplifier for cost-sensitive DC and low-frequency signal conditioning designs. Key characteristics include four amplifiers sharing one supply pin, a wide 3 V to 32 V rail range, single-supply operation from 2 V output swing above ground, and low quiescent current typical of the low-power family. Because all four channels are in one package, a complete amplifier subsystem costs one PCB footprint instead of four, and channels share a common ground reference, which simplifies layout and reduces ground-bounce risk in multi-channel analog circuits. The device is internally trimmed and thermally stable, with input stages protected against differential overvoltage through internal clamp diodes. Because the amplifier is a bipolar-input design rather than a CMOS-input design, input bias current is in the nanoamp range and common mode rejection is good over the full supply range, at the cost of higher supply current than CMOS-input amplifiers. Typical applications include sensor signal conditioning, low-frequency active filters, transducer amplifiers, audio preamplifier stages, current-to-voltage conversion in instrumentation, and general DC gain stages in industrial control and consumer equipment. Because the LM324 family is available from several manufacturers, the same 14-SOIC footprint and pinout are widely supported for second sourcing. When designing around the LM324MX, keep input and output signals inside the common mode range and account for input offset and bias current when working with high-impedance sources. Place the bypass capacitor close to the supply pin and keep feedback loops short so that the modest gain-bandwidth product does not limit stability.

Cotação Contato

LM324MX/J7001601

LM324MX/J7001601 - Quad Op Amp | Texas Instruments

The Texas Instruments LM324MX/J7001601 is a low-power, general-purpose quad operational amplifier packaged in a 14-SOIC package with a stated body width of 0.154 inches, or 3.90 mm. The device integrates four operational amplifiers into one package, allowing a design to use four independent amplifier sections without requiring four separate single-amplifier packages. The LM324MX/J7001601 designation is associated with the National Semiconductor LM324MX family and is offered in the market as a 14-pin SOIC device. An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. A quad operational amplifier contains four such amplifier sections, making it useful in systems that need several signal-conditioning functions at the same time. Its place in the electronics hierarchy is analog integrated circuit > operational amplifier > quad operational amplifier, and it is commonly used as a building block for sensing, buffering, filtering, amplification, and control circuits. The principal product characteristics established for this ordering code are its four-amplifier configuration, low-power general-purpose design, 14-SOIC package, and commercial operating-temperature designation of 0 to 70 degrees Celsius. The 14-SOIC format supports conventional surface-mount PCB assembly while providing enough pins for four amplifier inputs, four outputs, power rails, and ground connections. A single package can therefore reduce component count and simplify board-level purchasing and assembly. The LM324 family architecture is intended for practical analog signal paths rather than high-speed precision applications. Engineers should use the manufacturer datasheet to confirm input common-mode range, output swing, supply range, offset voltage, input bias current, slew rate, open-loop response, and output-current limitations before fixing a design. Those operating limits determine whether an application requires external bias compensation, output buffering, rail-to-rail signal coverage, or protection from input or output overvoltage. Typical uses include four-channel sensing interfaces, buffered sensor outputs, active low-pass filters, sample-and-hold signal conditioning, current-loop instrumentation, analog control loops, and general-purpose amplifier boards. In each case, the four sections can process related or independent channels while sharing one package. The device can be particularly useful when the design needs more amplifier channels than a dual package provides but does not require the density of a higher-performance mixed-signal component. For layout, keep input and feedback components close to their associated amplifier pins, route high-impedance signals with minimal leakage risk, and place input-biasing resistors where they can minimize leakage and parasitic capacitance. Confirm the polarity of feedback networks for each amplifier section because an incorrect connection can introduce unintended positive feedback and saturation. Decoupling capacitors should be placed at the power pins, and unused amplifier sections should be configured according to the manufacturer recommendations rather than left open. This product summary combines package information, manufacturer documentation locations, practical application guidance, and same-family replacement analysis. It is intended to help engineers determine whether the 14-SOIC quad operational amplifier fits a legacy or new analog board before consulting the complete LM324 datasheet for electrical limits, test conditions, and ordering details.

Cotação Contato

LM324MX/NOPB

LM324MX/NOPB - Quad 14-SOIC General-Purpose Amplifier | TI

The Texas Instruments LM324MX/NOPB is a low-power, general-purpose quad operational amplifier packaged in a 14-pin SOIC. It integrates four amplifier channels in one package, making it a practical choice for analog signal conditioning, current-to-voltage conversion, feedback networks, and low-frequency control applications. The device is identified as a Standard (General Purpose) Amplifier with a 4-circuit configuration. An operational amplifier is an analog building block that compares two input voltages and drives its output toward a higher or lower level. The quad LM324MX/NOPB combines four amplifiers in a single 14-pin SOIC, reducing component count and board area compared with four separate single or dual amplifier packages. Its standard general-purpose classification makes it suitable for designs where cost, supply availability, and straightforward implementation matter. The principal documented characteristics are the four-channel architecture, the 14-SOIC package, and the 0°C to 70°C commercial-temperature range associated with the Texas Instruments LM324MX family. The /NOPB suffix identifies the standard ordering variant without the NOPB marking used by some other catalog entries. Its low-power architecture suits battery-operated instrumentation, educational electronics, sensor interfaces, and general-purpose analog boards. In voltage-follower and non-inverting configurations, each amplifier can buffer a sensor output without introducing significant loading. The same buffer function applies to current-to-voltage converters when a sense resistor converts an input current into a measurable voltage. Because all four channels share one package, unused amplifiers can be configured as voltage followers or left unconnected only when their inputs are maintained at valid common-mode voltages. Typical uses include 4-to-20 mA receiver front ends, analog sensor conditioning, low-cost laboratory instruments, audio preamplifier stages, and general DC gain blocks. The quad arrangement is particularly effective when a board needs several similar channels, such as four sensor inputs, four buffered outputs, or a multichannel measurement interface. Designers should confirm the full electrical limits, input common-mode range, output swing, input bias current, gain-bandwidth behavior, and supply-current budget in the manufacturer datasheet before release. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be biased within the valid input range rather than left floating. This page combines package details, source-based specifications, drop-in alternatives, and practical design guidance for faster component selection.

Cotação Contato

LM324N

LM324N - Low-Power Quad Op Amp, 14-PDIP | Texas Instruments

The Texas Instruments LM324N is a low-power quadruple operational amplifier containing four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin PDIP package. According to the verified DigiKey listing, it is a standard general-purpose amplifier intended for transducer amplifiers, DC gain blocks, and conventional op-amp circuits. The four amplifiers can operate from a single power supply over a wide voltage range, making the device useful when one rail must be ground. An operational amplifier is a high-gain analog building block used to amplify, buffer, compare, or condition signals. The LM324 belongs to the broader hierarchy of operational amplifier, analog amplifier, linear amplifier, and semiconductor. Its internal frequency compensation removes the need for an external compensation network in many conventional closed-loop configurations, simplifying general-purpose analog designs. The verified product information establishes four amplifier circuits and a 14-pin PDIP package. The low-power designation reflects its use in low-voltage, low-current analog systems rather than high-performance precision signal chains. Because all four channels are housed in one through-hole package, a design can allocate the amplifiers across independent sensor channels, buffers, filters, or control loops while conserving board area. The manufacturer identifies the LM324-N as suitable for transducer amplifiers, DC gain blocks, and conventional op-amp circuits. These uses benefit from the device’s integrated quad-channel arrangement and single-supply operation. The verified snippets do not provide detailed electrical limits such as input-offset voltage, gain-bandwidth product, output-current capability, common-mode range, noise density, or temperature range, so those values are not inferred here. Typical implementation requires attention to supply bypassing, input common-mode limits, output swing, stability, and the relationship between the selected feedback network and closed-loop gain. Because this is a through-hole PDIP device, lead spacing and insertion orientation should be checked against the PCB footprint and the manufacturer pinout. This page consolidates the verified manufacturer and distributor references, identifies the application fit of the LM324N, and clearly separates confirmed data from parameters that require consultation of the exact manufacturer datasheet.

Cotação Contato

LM324NE3

LM324NE3 - Quad General-Purpose Op Amp, 14-PDIP | Texas Instruments

The Texas Instruments LM324NE3 is a quadruple general-purpose operational amplifier in a 14-pin PDIP (N) package. It contains four independent, high-gain, internally frequency-compensated amplifiers designed to run from a single supply or from split supplies over a wide voltage range. Each amplifier offers a differential input stage, a single-ended output stage, and internal frequency compensation, so no external compensation network is required in most closed-loop gain configurations. An operational amplifier (op amp) is a high-gain differential amplifier whose output voltage is controlled by the difference between its two inputs. The LM324 family sits in the general-purpose tier of the amplifier hierarchy: op amp -> voltage-feedback amplifier -> integrated amplifier IC -> analog signal chain building block. Because the LM324 is designed for single-supply operation, it is the classic choice for battery-powered, portable, and low-cost instrumentation where a ground-referenced signal sits near the bottom rail. Key features of the LM324 family include wide supply range operation, low quiescent current typical of the class, differential inputs with common-mode range extending close to the supply rails, and output swing capability from the negative rail to roughly 1.5 V below the positive rail on a single supply. The modern B and BA device variants extend the supply range to 3 V to 36 V and tighten input offset voltage to 3 mV (B) and 2 mV (BA), and are documented by the manufacturer as drop-in replacements for the original LM324, LM224 and LM2902 versions. The LM324NE3 specifically is the older non-B revision of the LM324N family supplied in a through-hole PDIP-14 package. Texas Instruments lists this part number as no longer in production, so new designs should target the current LM324N, LM324AN or LM324BN ordering codes in the same 14-pin through-hole footprint, or a surface-mount equivalent where board space is constrained. Typical applications include DC signal conditioning, low-level current-voltage conversion, sensor front-end amplification, audio preamplifier stages, battery-powered instrumentation, relay and comparator-style threshold stages, and general control loop error amplifiers. Because it is a bipolar-input amplifier, it is best suited to DC and low-frequency signal chains rather than wideband or high-speed applications. When designing with this part, keep in mind that the classic LM324 output swing does not reach the positive rail, so headroom of roughly 1.5 V is required above the desired output level. Decoupling of 0.1 uF close to the supply pins plus a bulk capacitor near the source of power is standard practice. Also note that the LM324 does not include input overvoltage or short-circuit protection, so rail-to-rail input conditions must be avoided in new designs. This page brings together the manufacturer lifecycle status, package and pinout details, drop-in replacement paths within the same 14-PDIP footprint, and practical design guidance that is not consolidated anywhere in a single manufacturer document, helping engineers qualify a supply-chain-safe alternative for legacy designs.

Cotação Contato

LM324NE4

LM324NE4 - Quad 14-Pin General-Purpose Op Amp | TI

Texas Instruments LM324NE4 is a four-circuit, general-purpose operational amplifier in a 14-pin plastic dual-inline package (PDIP). The device contains four independent, high-gain, frequency-compensated amplifiers designed to operate from a single supply or split supply over a wide operating-voltage range. Its internally compensated architecture simplifies AC amplifier design by eliminating the need for an external compensation capacitor. An operational amplifier is a voltage-controlled, differential-input amplifier whose closed-loop behavior is determined primarily by external feedback components. The LM324NE4 belongs to the operational-amplifier, analog-amplifier, and semiconductor hierarchy. Its four independent channels make it useful where several low-frequency analog signals must be amplified, summed, filtered, compared, or buffered within one package. The four-amplifier configuration provides design flexibility for sensor conditioning, signal buffers, active filters, and mixed-signal interfaces. Because each amplifier operates independently, one package can implement four separate signal paths. The 14-pin PDIP format also supports conventional through-hole assembly and is convenient for prototypes, educational systems, industrial control boards, and legacy equipment where maintaining an existing 14-pin footprint is important. The LM324 family is designed for general-purpose low-frequency applications rather than high-speed or precision signal chains. Internal frequency compensation gives stable operation in many closed-loop configurations without an added compensation network. Applications commonly include DC amplification, voltage followers, comparators, summing amplifiers, transimpedance stages, and low-frequency active filters. The device is not intended for demanding high-bandwidth, low-latency, or precision offset applications. A practical advantage of the LM324NE4 is flexible supply operation. It can operate from a single positive supply or from split positive and negative supplies, allowing the same device family to support ground-referenced signals and bipolar analog systems. The common-mode input range includes ground, which is useful in single-supply circuits where signal inputs remain near 0 V. Supply bypass capacitors close to the device are still required to control impedance and improve transient response. When replacing an existing LM324 implementation, verify the required output current, input and output swing, noise, offset, bandwidth, and operating temperature against the complete manufacturer datasheet. A 14-pin package match alone does not establish electrical equivalence, particularly between original and enhanced B-version devices or parts qualified for different applications. This page organizes the LM324NE4 package, electrical characteristics, application guidance, verified drop-in candidates, and design considerations into a practical engineering reference. It emphasizes where the original LM324NE4 is appropriate, which replacements retain the 14-pin footprint, and which parameters must be checked before approving a substitution.

Cotação Contato

LM324NG

LM324NG - Quad 3-32V Op Amp | onsemi | Signal Conditioning

onsemi LM324NG is a four-circuit, general-purpose operational amplifier designed for single-supply operation from 3 V to 32 V, with a maximum input offset voltage of 5 mV according to the Mouser product listing. The device is packaged in a 14-pin PDIP format. Four amplifiers are integrated into one package, allowing compact implementation of multi-stage analog signal-conditioning circuits. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to control an output stage. The LM324 belongs to the single-supply quad operational-amplifier hierarchy, combining transistor-level input and output stages with internal biasing. Its true differential inputs and common-mode rejection of at least 65 dB make it useful when a circuit must amplify small signals while rejecting voltages common to both inputs. Key characteristics include four amplifier channels, a 3 V to 32 V supply range, 5 mV maximum input offset voltage, and at least 65 dB common-mode rejection. These parameters support general-purpose amplifier, buffer, and instrumentation functions. The four-channel arrangement reduces package count when several independent analog stages are required, although common supply routing and thermal behavior must be considered on the PCB. The LM324NG uses a multiplexed internal architecture in which several amplifier sections share internal resources. Although the four circuits are presented as independent amplifiers, bandwidth and slew-rate behavior should be evaluated for the specific combination of active channels. The manufacturer datasheet should be consulted for the complete electrical characteristics, common-mode limits, output-swing limits, quiescent-current behavior, and recommended operating conditions. Typical uses include low-level signal conditioning, current-to-voltage conversion, sensor amplification, waveform shaping, and general instrumentation. In a buffered sensor frontend, the quad package can provide sensor amplification followed by active filtering or level shifting. In a multi-stage instrumentation circuit, two channels can be used for amplification while the remaining channels perform filtering, offset correction, or output driving when the load and bandwidth requirements permit. PCB design should keep input traces short, provide a stable ground-return path, and place input and output decoupling capacitors close to the device pins. Check the datasheet for the recommended supply capacitor and confirm that external feedback components preserve the intended closed-loop bandwidth. Avoid placing sensitive input nodes beside switching nodes or high-current return paths, because parasitic coupling can dominate the input offset and common-mode performance. This product record combines the manufacturer-device description, package identification, electrical highlights, search-oriented technical questions, application guidance, and same-package replacement information. It is designed to help engineers identify the LM324NG quickly, compare it with pin-compatible devices, and plan a practical analog implementation while consulting the manufacturer datasheet for design-limiting details.

Cotação Contato

LM324NS

LM324NS - Low-Power Quad Op Amp | Texas Instruments | SOIC-14

The Texas Instruments LM324NS is a low-power, general-purpose quad operational amplifier packaged in a 14-pin small-outline integrated circuit (SOIC-14). It provides four independent amplifier sections in one package and supports single-supply operation across a wide voltage range, making it suitable for transducer amplifiers, direct-current gain blocks, and conventional op-amp circuits. According to the Texas Instruments LM324-N product page, the device is designed around a low-power architecture whose supply-current drain remains largely independent of supply voltage. An operational amplifier, commonly abbreviated op amp, is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The LM324 belongs to the general-purpose amplifier category within the broader operational-amplifier hierarchy. It provides practical open-loop performance for cost-sensitive instrumentation, buffering, summing, and feedback-control circuits where rail-to-rail input and output behavior is not required. The common-mode input range includes ground, allowing direct sensing of small signals near the lower supply rail. Key characteristics of the LM324NS include four amplifier circuits per package, a typical supply-current drain of 0.8 mA per amplifier as stated in the available datasheet listing, and a common-mode input range that includes ground. The device is intended for single-supply operation, which simplifies power partitioning in battery-powered and industrial measurement systems. Its 14-SO package also provides adequate pin spacing for conventional through-hole assembly and automated surface-mount handling without requiring a fine-pitch land pattern. The quad organization gives designers four matched amplifier sections in one package while keeping each amplifier electrically independent. This is useful in multi-channel sensor systems where channel-to-channel layout consistency and a shared supply connection simplify routing. Compared with four separate single-amplifier packages, the LM324NS reduces component count, supply-pin count, and board area. The trade-off is that a defect affecting the package can affect multiple amplifier sections. Typical uses include low-frequency sensor signal conditioning, analog summation, current-to-voltage conversion, general-purpose buffering, and audio or industrial control interfaces. Because the common-mode input range reaches ground, the device is especially suitable for sensors whose output sits near 0 V. It is generally not the preferred choice where rail-to-rail swing, low-noise precision performance, high-speed operation, or guaranteed output-current capability is essential. The principal design consideration is supply-voltage headroom. Engineers should verify the input common-mode range, output swing, input-offset voltage, input-bias current, and open-loop gain against the signal being sensed rather than assuming ideal behavior. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs must be biased so they remain in a defined state. This page consolidates manufacturer information, distributor pricing, package details, pin assignments, and practical substitution guidance. It also distinguishes direct drop-in alternatives from merely similar amplifier families so procurement and design decisions can be made from one engineering-focused reference.

Cotação Contato

LM324NS-MAKS

LM324NS-MAKS - Quad 1.2 MHz Op Amp | Texas Instruments

The Texas Instruments LM324NS-MAKS is a quadruple general-purpose operational amplifier packaged in a 14-pin SOIC. Each amplifier section delivers 1.2 MHz gain-bandwidth product and supports output current up to 30 mA, making the device suitable for low-cost signal conditioning, buffering, sensing, and analog control applications. An operational amplifier is an analog IC that amplifies the voltage difference between its non-inverting and inverting inputs. The LM324 belongs to the general-purpose amplifier hierarchy, combining four amplifiers in one package. It is commonly used where low offset, adequate gain bandwidth, input-stage flexibility, and wide supply flexibility are more important than rail-to-rail operation or very low noise. Each of the four amplifier sections operates from a single positive supply or a split supply arrangement. The internal architecture supports common-mode input behavior appropriate for many sensor, transducer, and control-signal interfaces. Output current capability of 30 mA allows the device to drive moderate loads while also operating as a unity-gain buffer in many practical circuits. The LM324 family is valued for its combination of four amplifier sections, 1.2 MHz gain-bandwidth product, and 30 mA output drive in a 14-pin SOIC. Designers should account for the input and output common-mode ranges, which do not reach the negative supply rail in the same way as rail-to-rail input amplifiers. A bypass capacitor near the supply pins is recommended to reduce supply-related noise and improve transient response. Typical uses include environmental sensors, low-cost audio and communication interfaces, analog control loops, instrumentation buffers, active filters, and general-purpose signal conversion. The device can also serve in educational, industrial, and consumer designs where a stable quad-amplifier package simplifies board layout and reduces component count. For new layouts, place the decoupling capacitor close to the positive supply pin and route the ground return directly to the ground pin. Use the pin-description table and typical application circuits in the manufacturer datasheet when assigning PCB tracks, especially around input, output, and supply connections.

Cotação Contato

LM324NSR

LM324NSR - Low-Power Quad Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)

The Texas Instruments LM324NSR is a low-power, general-purpose quad operational amplifier packaged in a 14-pin small-outline integrated circuit (SOIC-14). It provides four independent amplifier sections in one package and supports single-supply operation across a wide voltage range, making it suitable for transducer amplifiers, direct-current gain blocks, and conventional op-amp circuits. According to the Texas Instruments LM324-N product page, the device is designed around a low-power architecture whose supply-current drain remains largely independent of supply voltage. An operational amplifier, commonly abbreviated op amp, is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The LM324 belongs to the general-purpose amplifier category within the broader operational-amplifier hierarchy. It provides practical open-loop performance for cost-sensitive instrumentation, buffering, summing, and feedback-control circuits where rail-to-rail input and output behavior is not required. The common-mode input range includes ground, allowing direct sensing of small signals near the lower supply rail. Key characteristics of the LM324NSR include four amplifier circuits per package, a typical supply-current drain of 0.8 mA per amplifier as stated in the available datasheet listing, and a common-mode input range that includes ground. The device is intended for single-supply operation, which simplifies power partitioning in battery-powered and industrial measurement systems. Its 14-SO package also provides adequate pin spacing for conventional through-hole assembly and automated surface-mount handling without requiring a fine-pitch land pattern. The quad organization gives designers four matched amplifier sections in one package while keeping each amplifier electrically independent. This is useful in multi-channel sensor systems where channel-to-channel layout consistency and a shared supply connection simplify routing. Compared with four separate single-amplifier packages, the LM324NSR reduces component count, supply-pin count, and board area. The trade-off is that a defect affecting the package can affect multiple amplifier sections. Typical uses include low-frequency sensor signal conditioning, analog summation, current-to-voltage conversion, general-purpose buffering, and audio or industrial control interfaces. Because the common-mode input range reaches ground, the device is especially suitable for sensors whose output sits near 0 V. It is generally not the preferred choice where rail-to-rail swing, low-noise precision performance, high-speed operation, or guaranteed output-current capability is essential. The principal design consideration is supply-voltage headroom. Engineers should verify the input common-mode range, output swing, input-offset voltage, input-bias current, and open-loop gain against the signal being sensed rather than assuming ideal behavior. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs must be biased so they remain in a defined state. This page consolidates manufacturer information, distributor pricing, package details, pin assignments, and practical substitution guidance. It also distinguishes direct drop-in alternatives from merely similar amplifier families so procurement and design decisions can be made from one engineering-focused reference.

Cotação Contato

LM324NSRE4

LM324NSRE4 - Quad 1.2 MHz Op Amp | Texas Instruments | 14-SO

Texas Instruments LM324NSRE4 is a quadruple general-purpose operational amplifier containing four independent, internally frequency-compensated amplifiers in a 14-pin SOIC package. The device supports single-supply or split-supply operation, operates across a 3 V to 36 V supply range in the B-version family, and provides a typical gain-bandwidth product of 1.2 MHz with a 0.5 V/us slew rate. Its common-mode input range includes ground, allowing the amplifiers to accept input signals near the lower supply rail in single-supply systems. A general-purpose operational amplifier is a voltage-amplifying semiconductor that uses high open-loop gain and negative feedback to create stable, predictable closed-loop behavior. The LM324 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Four independent amplifiers in one package allow compact designs to implement buffers, voltage followers, summing amplifiers, comparators, instrumentation-style signal conditioning, and general feedback networks without requiring four separate packages. Key characteristics include a 1.2 MHz typical gain-bandwidth product, a 0.5 V/us typical slew rate, and a supply-current drain of 0.8 mA typical. The common-mode input voltage range includes ground, which is particularly useful for battery-powered equipment and sensors operating near 0 V. The four amplifiers are frequency compensated, reducing the external compensation components normally required around each output. Their common design is suited to low-frequency signal conditioning rather than high-speed precision analog processing. The LM324NSRE4 architecture is intended for single or dual supplies. With split supplies, the midpoint of the two rails serves as the signal reference; with a single supply, the input and output signals are referenced to ground and must remain within the amplifier’s common-mode and output-swing limits. Because the package contains four independent amplifiers, designers can use unused sections for testing or bring them to a defined state in accordance with the manufacturer’s recommendations. Typical uses include low-cost sensor interfaces, industrial control loops, audio preamplifier stages, audio and communication filters, transducers, test equipment, and instrumentation. The 14-pin SOIC package provides a practical surface-mount option for prototypes, medium-density analog boards, and general-purpose embedded systems where four matched-function amplifier sections reduce board area and assembly cost. Design should account for input offset, output swing, unity-gain stability, source impedance, and supply headroom. Decoupling capacitors should be placed close to the supply pins, and sensitive analog signals should be routed away from switching nodes. The LM324NSRE4 is preferable where cost, supply range, and four integrated amplifiers matter more than the lower offset voltage, wider bandwidth, or faster slew rate offered by precision or high-speed amplifier families. This page organizes the LM324NSRE4 electrical characteristics, package information, replacement candidates, application guidance, and engineering trade-offs into a practical selection reference. It also identifies which replacement details must be checked against each manufacturer’s current datasheet before a component is approved for production.

Cotação Contato

LM324NSRG4

LM324NSRG4 - Quad Op Amp in 14-SO | Texas Instruments

The Texas Instruments LM324NSRG4 is a standard general-purpose quadruple operational amplifier containing 4 amplifier circuits in a 14-SO surface-mount package. It is designed for general signal-conditioning applications where four similar amplifier channels can provide consistent voltage amplification, buffering, filtering, or feedback functions within one component. The integrated quad arrangement reduces the number of packages and PCB connections needed for multi-channel analog systems. An operational amplifier is an analog integrated circuit that compares its inverting and non-inverting inputs and drives its output according to the voltage difference between them. Operational amplifiers belong to the amplifier IC hierarchy and are widely used in signal chains spanning sensors, data converters, audio equipment, industrial controls, communications, and instrumentation. Negative feedback shapes the closed-loop behavior, while the amplifier supplies the gain or current required to drive the next stage. The LM324NSRG4 provides 4 amplifier channels in one 14-SO package, making it suitable for designs that require matched functional channels without allocating a separate package for every stage. Its general-purpose classification supports a broad range of conventional analog designs. Because the exact electrical limits, voltage ranges, current capability, noise performance, and temperature ratings are not reproduced in the indexed product excerpts, engineers should use the manufacturer datasheet for final circuit qualification. The quad topology can simplify layouts that require several related functions. A four-channel implementation may handle two differential or buffered channels, four noninverting gain stages, or a mixture of filtering and amplification functions. Combining these blocks in one package can shorten interstage routing and reduce board-space requirements compared with four discrete single-amplifier packages, provided the selected amplifier ratings satisfy every channel requirement. Typical uses include low-frequency sensor conditioning, general voltage buffering, analog signal processing, current-to-voltage conversion, basic active filters, and control-signal interfaces. The device is most appropriate when the design calls for a conventional general-purpose amplifier rather than the low-noise, high-speed, low-power, or precision characteristics associated with specialized operational-amplifier families. Before finalizing the PCB design, assign every pin by consulting the pin-description table in the Texas Instruments datasheet. Preserve the package orientation, route sensitive input and feedback paths away from noisy switching nodes, and include the bypass and compensation components specified by the application circuit. Confirm supply voltage, input common-mode range, output swing, load capability, and stability requirements over the full intended temperature range. This product page organizes the confirmed package and amplifier configuration, identifies a directly documented replacement, and adds engineering guidance for schematic definition, PCB implementation, and alternative selection. It is intended to accelerate component searches while keeping the final design decision tied to the manufacturer datasheet and the electrical requirements of the target application.

Cotação Contato

LM324PT

LM324PT - Quad Low-Power Op-Amp, 1.3MHz, TSSOP-14 | STMicroelectronics

The STMicroelectronics LM324PT is a low-power quad operational amplifier integrating four general-purpose amplifier channels in a 14-pin TSSOP package, operating from a single 3V to 32V supply or dual supplies of ±1.5V to ±16V, with a 1.3MHz gain-bandwidth product and 0.4 V/us slew rate. An operational amplifier (op-amp) is a high-gain differential voltage amplifier that, with external feedback networks, performs mathematical operations such as amplification, filtering, comparison, and integration. The op-amp sits at the foundation of the analog signal-chain hierarchy: op-amp -> amplifier IC -> analog front end -> signal conditioning system. Quad op-amps like the LM324 family pack four independent channels sharing one supply, reducing board area and BOM cost versus four single amplifiers. Key features of the LM324PT include an input common-mode voltage range that extends down to ground (ground-sensing inputs on single-supply rails), a large DC voltage gain of 100dB, and a very low supply current of approximately 375uA per amplifier. These characteristics make it a cost-effective workhorse for battery-powered and single-supply industrial designs. Architecturally, the LM324 uses a classic bipolar process with PNP input stages that enable the ground-sensing common-mode range, and class-AB output stages that can swing close to the negative rail. The four channels are well matched and thermally coupled, which minimizes offset drift between channels in multi-channel signal conditioning. Typical applications include transducer amplification, active RC filters, voltage comparators and level shifters, LED drivers, and DC gain blocks in consumer and industrial equipment. Design consideration: the LM324 is not a rail-to-rail output device - the output saturates roughly 1.5V below VCC, so set signal swings accordingly to avoid clipping near the positive rail. This page consolidates verified datasheet parameters, drop-in alternatives, pricing tiers, design notes, and comparison data not found together on the manufacturer datasheet.

Cotação Contato

LM324PW

LM324PW - 4-Channel General-Purpose Op Amp | Texas Instruments

Texas Instruments LM324PW is a four-channel, general-purpose operational amplifier packaged in a 14-pin TSSOP. Each channel provides independent high-gain, frequency-compensated amplification for single-supply or split-supply operation. The device supports low-power operation with a typical supply-current drain of 0.8 mA, while its common-mode input range includes ground for direct sensing near the lower supply rail. An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its two inputs while using negative feedback to control gain, bandwidth, and output behavior. The LM324 belongs to the broader operational amplifier, analog amplifier, and semiconductor hierarchy. Its four independent channels make it useful wherever several low-frequency analog signals must be amplified or conditioned within one compact package. The principal advantages are integration, low power consumption, and the ability to operate from one supply or two split supplies. Four channels reduce package count compared with four separate single op amps. The common-mode input range extending to ground allows the amplifier to process signals close to the lower rail, which is important in battery-powered sensors, audio paths, and control systems. The internal frequency compensation makes the device suitable for general-purpose closed-loop amplifier configurations without external compensation. Each channel is electrically independent, so the four amplifiers can implement separate functions such as sensor amplification, active filtering, buffering, voltage comparison with external reference circuitry, or level shifting. The internal frequency compensation makes the device suitable for general-purpose closed-loop amplifier configurations without external compensation. At low frequencies, this architecture favors straightforward analog design over the wider bandwidth and rail-to-rail input/output performance associated with newer amplifier families. Typical applications include industrial sensor interfaces, audio preamplification, joystick and position sensing, smoke-detector signal conditioning, active filters, and low-cost embedded control systems. The 14-pin TSSOP is particularly useful for compact, surface-mount equipment where analog channel count and PCB area must be balanced. For designs requiring precision offsets, low noise, high bandwidth, rail-to-rail operation, or very low quiescent current, a newer precision or micropower amplifier may be a better architectural choice. When laying out the LM324PW, place input and feedback components close to their associated pins and route sensitive input nets away from switching nodes and high-current paths. Check common-mode, output-swing, and supply limits against the operating conditions. Input and output bypassing capacitors should follow the manufacturer’s recommended network, with attention to capacitor tolerance and stability when driving capacitive loads. This page combines the manufacturer’s device description with application guidance, package information, practical design notes, and a restrained comparison of compatible alternatives. It is intended to help engineers identify whether the LM324PW’s four-channel integration and low-power operation fit a design before moving into detailed schematic, stability, and qualification review.

Cotação Contato

Subcategorias

Produtos (39.000+)

LM324F-E2 - 4-Channel 3-32V Op Amp | ROHM Semiconductor

LM324F-GE2 - 3-32V Quad Ground-Sense Op Amp | ROHM

LM324FVJ-E2 - 4-Channel 3-32V Op Amp | ROHM

LM324J - Quad 32 V 1 MHz Op Amp | Texas Instruments

LM324KD - Quad 30V 1.2MHz Op Amp | Texas Instruments

LM324KDR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)

LM324KN - Quad 14-PDIP General-Purpose Op Amp | Texas Instruments

LM324M - Low-Power Quad Op Amp | Texas Instruments

LM324MT - Low-Power Quad Op Amp, 14-TSSOP | Texas Instruments

LM324MTX/NOPB - Quad 1 MHz Op Amp | Texas Instruments

LM324MX - Low Power Quad Op Amp, 3V-32V, 14-SOIC | Texas Instruments

LM324MX/J7001601 - Quad Op Amp | Texas Instruments

LM324MX/NOPB - Quad 14-SOIC General-Purpose Amplifier | TI

LM324N - Low-Power Quad Op Amp, 14-PDIP | Texas Instruments

LM324NE3 - Quad General-Purpose Op Amp, 14-PDIP | Texas Instruments

LM324NE4 - Quad 14-Pin General-Purpose Op Amp | TI

LM324NG - Quad 3-32V Op Amp | onsemi | Signal Conditioning

LM324NS - Low-Power Quad Op Amp | Texas Instruments | SOIC-14

LM324NS-MAKS - Quad 1.2 MHz Op Amp | Texas Instruments

LM324NSR - Low-Power Quad Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)

LM324NSRE4 - Quad 1.2 MHz Op Amp | Texas Instruments | 14-SO

LM324NSRG4 - Quad Op Amp in 14-SO | Texas Instruments

LM324PT - Quad Low-Power Op-Amp, 1.3MHz, TSSOP-14 | STMicroelectronics

LM324PW - 4-Channel General-Purpose Op Amp | Texas Instruments