Microcontroladores

Produtos (19.000+)

MC68EN360ZQ25VL - 25MHz QUICC M683xx 32-Bit MPU | NXP 357-PBGA
MC68EN360ZQ25VL

MC68EN360ZQ25VL - 25MHz QUICC M683xx 32-Bit MPU | NXP 357-PBGA

The NXP MC68EN360ZQ25VL is a CPU32+ M683xx series 32-bit microprocessor operating from a 3.3V supply at 25 MHz, integrated into a 357-ball PBGA (25x25 mm) package. The device combines a 32-bit CPU core with the QUICC (Quad Integrated Communication Controller) peripheral set, including Ethernet and multi-channel serial I/O for embedded networking applications. What is a microprocessor IC? A microprocessor (MPU) is an integrated circuit that contains a central processing unit capable of executing instructions fetched from external memory. The MC68EN360 family belongs to the M683xx ColdFire/CPU32+ lineage, which evolved from the Motorola 68000 architecture into a family of integrated microprocessors with on-chip peripherals for communications and embedded control. Key features include a single 32-bit core at 25 MHz, an integrated Ethernet media access controller (ETHRN) for 10 Mbps networking, HDLC/serial communication channels, and a DRAM controller. The part is offered in a 357-pin PBGA (also referred to as 357-BBGA) package measuring 25x25 mm, supplied in tray packaging with commercial temperature grading per the verified data. The MC68EN360 integrates the CPU32+ core with the QUICC peripheral engine, allowing simultaneous execution of communication tasks alongside user code. The 0.57-micron process geometry and 25 MHz clock frequency place this part in the legacy Freescale/NXP embedded networking category, suited for telecom, industrial, and routing equipment designs of the late 1990s and early 2000s. Typical applications include LAN routers and bridges, telecom switching equipment, industrial serial communication controllers, and embedded networking appliances. The on-chip Ethernet MAC reduces external component count compared to CPU-only designs of the same era. When designing with this part, verify PCB layout tolerances for the 1.27 mm pitch BGA balls and confirm thermal vias under the package. The legacy 0.57-micron process means the device is not low-power by modern standards; ensure the power supply decoupling network matches the manufacturer's reference schematic. This page synthesizes distributor pricing (as of 2026-10-17), drop-in alternatives including MCF5282CVM80 and MC68MH360ZQ25VL, and practical engineering notes not found in the manufacturer datasheet alone.

Cotação Contato
MC68EN360ZQ25VL-FR - M683xx QUICC CPU32+ 25MHz MPU | NXP
MC68EN360ZQ25VL-FR

MC68EN360ZQ25VL-FR - M683xx QUICC CPU32+ 25MHz MPU | NXP

The NXP MC68EN360ZQ25VL-FR is a CPU32+ Microprocessor IC from the M683xx QUad Integrated Communication Controller (QUICC) family, operating at 25 MHz with a 32-bit core in a 357-pin PBGA (25x25) package. It integrates a versatile one-chip microprocessor and peripheral combination that targets communication-intensive embedded controller applications. The part is supplied in tray packaging. What is a QUICC microprocessor? QUICC (Quad Integrated Communication Controller) is Motorola/Freescale/NXP's flagship 32-bit communications-controller architecture that combines a CPU32+ processor core with the Communications Processor Module (CPM). The CPM offloads serial-channel handling from the CPU through dedicated RISC engines (CP), enabling concurrent management of multiple HDLC/SDLC, UART, and Ethernet channels without burdening the main core. The QUICC family sits within the broader taxonomy: microprocessor (MPU) -> embedded microprocessor -> communications controller -> system-on-chip. This positioning makes QUICC devices the forerunners of modern SoCs with integrated networking peripherals. Key features of the MC68EN360ZQ25VL-FR include the CPU32+ 32-bit core, integrated DRAM controller, 10 Mbps Ethernet MAC, four serial communications controllers (SCCs) supporting HDLC/SDLC/UART protocols, and a system integration module (SIM60). The 25 MHz clock speed delivers approximately 25 MIPS of processing throughput, and the 3.3V supply keeps power dissipation manageable for embedded systems of the late 1990s / early 2000s era. The architecture employs a Harvard-style split between the CPU32+ core and the CPM. The CPM contains its own RISC processor, serial channel buffers, and timing controllers, allowing the chip to sustain full-duplex communication on all four SCCs plus Ethernet simultaneously with negligible CPU intervention. Memory is configured via the SIM60 with support for DRAM, SRAM, and flash, plus eight chip selects for external peripherals. Typical applications include ISDN router/gateway designs, frame-relay access devices, multi-port serial communication concentrators, industrial control systems with networking, and legacy telecommunications infrastructure. The integrated 10 Mbps Ethernet MAC and four SCCs make it particularly suited to early-internet-edge routers, DSLAM line cards, and protocol bridges. When designing with the MC68EN360ZQ25VL-FR, engineers should follow the layout guidelines in the NXP/Freescale application notes for BGA decoupling and high-speed signal routing. The 357-ball PBGA is a high-pin-count package that demands multilayer PCB stack-up with dedicated power and ground planes; failure to observe signal-integrity recommendations can cause CPM timing violations. This page synthesizes distributor stock levels, drop-in same-package alternatives, RoHS status and application guidance not consolidated in the manufacturer datasheet alone, helping engineers evaluate lifecycle risk for this legacy communications MPU.

Cotação Contato
MC68EN360ZQ33L - 33MHz QUICC Ethernet MPU | NXP | BGA-357
MC68EN360ZQ33L

MC68EN360ZQ33L - 33MHz QUICC Ethernet MPU | NXP | BGA-357

The NXP MC68EN360ZQ33L is a 32-bit microprocessor from the M683xx (CPU32+) family, integrating a 33 MHz CPU core with the QUICC (Quad Integrated Communication Controller) engine and a 10/100-capable Ethernet MAC in a single 357-ball PBGA package. It combines a 4K-byte instruction cache, 4K-byte data cache, MMU, and a versatile peripheral set including SCCs, SMCs, an SPI, an I2C controller, a parallel port, and a DRAM controller, making it a one-chip networking and control solution. A microprocessor (MPU) in the M683xx family is a 32-bit CISC/RISC processor originally derived from the Motorola 68000 lineage, designed for embedded networking, telecom, and industrial control workloads. It belongs to the broader category of microprocessors -> embedded processors -> communication controllers, sitting hierarchically below application processors and above simple microcontrollers in capability and integration. The "EN" in MC68EN360 denotes the integrated Ethernet MAC, while "ZQ33L" encodes the 357-BGA package, 33 MHz clock, and low-voltage/legacy process variant. Key features include a 33 MHz CPU32+ core with hardware multiply/divide, an integrated 10/100 Ethernet MAC (Fast Ethernet controller), four Serial Communication Controllers (SCCs) supporting HDLC/SDLC, UART, transparent modes, BISYNC, and Ethernet, plus two Serial Management Controllers (SMCs), a Serial Peripheral Interface (SPI), an I2C bus interface, a DRAM controller supporting up to 32 address bits, a 16-channel DMA, timers, and a parallel I/O port. The device operates from a single 5V supply and is housed in a 357-ball Plastic BGA (25 x 25 mm). The QUICC engine architecture offloads communication processing from the CPU32+ core, allowing line-rate handling of multiple serial protocols concurrently. With 4K+4K on-chip caches, MMU, and burst-mode memory support, it can sustain deterministic throughput for routing, bridging, and protocol-conversion tasks typical of legacy telecom and industrial routers, bridges, and embedded networking appliances. Typical applications include legacy routers and bridges, industrial Ethernet gateways, telecom protocol converters, WAN access concentrators, serial-to-Ethernet device servers, and point-of-sale terminals. The integrated Ethernet MAC and multi-protocol SCCs make it well-suited to systems requiring concurrent Ethernet and legacy serial traffic handling. When designing with this part, use Rochester Electronics or NXP/Freescale franchised stock because the part is mature and production is limited; verify thermal management for the 357-BGA, ensure the 5V supply is well-decoupled, and confirm the firmware toolchain (CPU32+/68K GCC or Diab) supports your protocol stack. The part is RoHS non-compliant and contains lead, so conformal coating or lead-free revalidation is required for new RoHS-mandated designs.

Cotação Contato
MC68F375BGMVR33 - 33MHz 32-Bit 256KB Flash MCU | NXP
MC68F375BGMVR33

MC68F375BGMVR33 - 33MHz 32-Bit 256KB Flash MCU | NXP

The NXP Semiconductors MC68F375BGMVR33 is a 32-bit single-core ColdFire M68300 microcontroller operating at 33 MHz, with 256 KB of flash program memory in a 217-PBGA package measuring 23 x 23 mm. The device combines a 3.3 V supply requirement, CANbus, SPI, UART/USART connectivity, PWM, watchdog, power-on reset, and 48 I/O functions in one automotive-oriented embedded-control package. What is a 32-bit microcontroller? A microcontroller is a semiconductor device that integrates a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. This ColdFire controller belongs to the microcontroller, embedded processor, 32-bit microprocessor, and embedded-control hierarchy. It executes firmware from flash memory and uses its communication and timing peripherals to control external automotive, industrial, or communications equipment. The verified product information identifies a CPU32 M683xx core, 33 MHz operating speed, and 256 KB organized as 256K x 8 flash. Its listed peripheral set includes CANbus, SPI, UART/USART, power-on reset, pulse-width modulation, and a watchdog timer. A 3.3 V automotive configuration makes the part relevant to embedded systems that require a 32-bit architecture, on-chip flash, and multiple serial interfaces without an external memory bus. The MC68F375 family is based on the ColdFire architecture, commonly identified in source data as M68300 or CPU32 M683xx. At 33 MHz, the controller provides substantially more processing capability than an 8- or 16-bit MCU while retaining dedicated embedded peripherals. The verified data does not specify RAM size, supply-voltage tolerances, transceiver details, or the exact allocation of the 48 I/O pins, so those values must be confirmed in the manufacturer documentation before design release. Potential uses include automotive body and chassis control modules, CAN-connected node controllers, industrial automation equipment, serial gateways, and embedded test systems. CANbus support is useful for distributed networks, while SPI and UART/USART permit attachment to sensors, transceivers, memory devices, and service interfaces. PWM can support actuator or signaling functions, and the watchdog timer helps recover the controller after a software or hardware fault. The principal design concern is package complexity. A 217-PBGA footprint requires a multilayer PCB, fine-pitch routing, controlled escape routing, and assembly capability suited to large-area grid arrays. Before starting a new design, engineers should verify the obsolete-product status, exact pinout, electrical limits, flash programming method, peripheral multiplexing, and software-device revision in the official datasheet. This page consolidates the verified distributor specifications, lifecycle information, package details, sourcing references, and compatibility caveats for the MC68F375BGMVR33. It deliberately distinguishes documented values from missing technical data and does not treat generic search results as proof of pin-compatible replacements.

Cotação Contato
MC68F375BGMZP33 - CPU32 M683xx 33MHz 256KB Flash MCU | NXP
MC68F375BGMZP33

MC68F375BGMZP33 - CPU32 M683xx 33MHz 256KB Flash MCU | NXP

The NXP MC68F375BGMZP33 is a 32-bit CPU32 microcontroller from the M68300/68HC16 modular family, integrating 256KB of Flash memory, 8KB SRAM, and 2KB additional RAM in a 217-pin PBGA package (23x23 mm). It operates at a 33 MHz CPU clock speed and is targeted at embedded industrial, automotive, and consumer control applications. According to NXP product information, this part is in the 'No Longer Manufactured' status, which is critical to note for long-term procurement planning. A 32-bit microcontroller (MCU) is an integrated circuit containing a 32-bit CPU core, volatile and non-volatile memory, and programmable peripherals designed for embedded control tasks. Within the broader taxonomy, an MCU belongs to the semiconductor > integrated circuit > microcontroller > 32-bit microcontroller hierarchy. The M68300/68HC16 family uses a modular architecture in which functional blocks (CPU, memory, timers, serial, I/O) are connected via an internal intermodule bus (IMB), enabling NXP to instantiate many part numbers from a shared silicon platform. Key features of the MC68F375BGMZP33 include a 32-bit CPU32 core, 256KB on-chip Flash, 8KB SRAM plus 2KB additional RAM, 33 MHz system clock, and 217-ball PBGA packaging rated for commercial temperature grade. The Flash memory allows in-application reprogramming, simplifying firmware updates in the field. The 23x23 mm PBGA package provides high-density board mounting while supporting the large number of I/O pins required by complex embedded systems. The CPU32 architecture is a 32-bit extension of the M68k family and executes the same instruction set as the Motorola 68020, providing a migration path for legacy 68k code. The modular intermodule bus (IMB) means that peripheral selection is part-aware, and the device integrates modules such as a system integration module, timers, serial interfaces, and a queued serial module for communication. According to the manufacturer datasheet, designers should review the family reference manual for detailed peripheral mapping. Typical applications include industrial automation controllers, automotive body and chassis controllers, point-of-sale terminals, and complex embedded systems that previously used the 68k architecture. The 256KB Flash and 8+2KB RAM configuration suits systems with moderate code size and real-time data buffering requirements. When designing with this part, note that it is now in NXP's 'No Longer Manufactured' lifecycle. Engineers should verify long-term supply, consider drop-in replacements, or evaluate migration to a newer Kinetis or ColdFire+ family MCU. Confirm operating temperature grade with your distributor before sourcing, as the 'ZP33' suffix indicates a 33 MHz speed grade within the package. This page synthesizes distributor stock levels, lifecycle status, drop-in alternatives from the MC68300 family, and practical design considerations not found in the standalone product brief.

Cotação Contato
MC68HC000CEI16 - 32-Bit 16MHz M68k MPU, 68-PLCC | NXP / Motorola
MC68HC000CEI16

MC68HC000CEI16 - 32-Bit 16MHz M68k MPU, 68-PLCC | NXP / Motorola

The NXP MC68HC000CEI16 is a 32-bit M68000 family microprocessor (MPU) operating at 16 MHz, housed in a 68-pin Plastic Leaded Chip Carrier (PLCC, 24.21 x 24.21 mm) package. It implements the EC000 low-power variant of the original Motorola 68000 architecture, combining full 32-bit internal data and address paths with a 16-bit external data bus and a 24-bit external address bus to reduce system cost while preserving instruction-set compatibility with the flagship MC68000. The 'CEI' suffix designates the industrial temperature range (typically -40C to +85C), and the '16' suffix denotes the 16 MHz maximum clock. The device supports both 3.3V and 5V supplies and exposes two unidirectional 16-bit data buses, an asynchronous bus interface, and the original M68k programming model with eight 32-bit data registers and eight 32-bit address registers. What is an MPU (Microprocessor Unit)? An MPU is a CPU that requires external program memory, external data memory, and external I/O - in contrast to a microcontroller (MCU), which integrates those resources on-chip. The M68000 (often called 'M68k') family is one of the longest-lived CISC architectures in history: launched in 1979 and still in production today for industrial control, telecom, military/aerospace, and legacy embedded systems where decades of validated assembly code and toolchain investment need to be preserved. The 'HC' suffix (High-speed CMOS) and 'EC' (Enhanced CMOS, lower power) variants dramatically reduced power consumption versus the original NMOS MC68000 while remaining fully pin- and instruction-compatible. Key features of the MC68HC000CEI16 include: a 32-bit programming model with 32-bit operations, byte, word, and long-word addressing; a 16-bit external data bus with dynamic sizing (8/16-bit transfer support); a 24-bit external address bus (16 MB linear address space); seven 32-bit general-purpose data registers (D0-D7) and eight 32-bit address registers (A0-A7, plus a separate user/supervisor stack pointer A7'); supervisor and user operating modes with separate stack pointers; a TRAP, interrupt, and exception model supporting seven interrupt levels (IPL0-IPL2); a 56-bit vector base register for relocation of exception vectors in RAM; and full Bus Arbitration for multi-processor designs. Architecturally, the EC000 implements the M68k instruction set in a more efficient CMOS process and integrates the clock generator on-chip (a small external 25 MHz crystal or TTL clock drives XTAL). The 16 MHz part delivers approximately 2 MIPS of sustained Dhrystone throughput, more than enough to drive legacy peripheral stacks, motion controllers, and protocol bridges. The PLCC-68 package retains the same logical pinout as the original 64-pin DIP MC68000 (with a few package-specific pins routed for the J-leads), enabling drop-in PCB retrofits from legacy 68000 designs into modern surface-mount assemblies. Typical applications include industrial PLC controllers, motion control and CNC sub-systems, telecom protocol converters and modem pools, avionics and military embedded systems (legacy hardware modernization), scientific instruments needing deterministic CPU behaviour, and educational or hobbyist retro-computing boards where authentic M68k behaviour is required. The wide 3.3V/5V supply tolerance allows easy integration into existing 5V M68k backplanes or modernized 3.3V mixed-voltage systems. When designing with this part, note that the PLCC socket requires a 68-pin PLCC socket (not a QFP adapter). Decouple VCC with at least one 0.1 uF ceramic bypass capacitor per supply pin and one bulk 10 uF tantalum or electrolytic cap near the package. Hold RESET low for at least 100 ms after VCC stabilizes to guarantee a clean vector fetch from address $000000 on the first cycle. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in PLCC-68 alternatives from the same M68k family, practical PLCC socket and decoupling design notes, and a parameter comparison table not found in any single manufacturer document.

Cotação Contato
MC68HC000CEI16R - 16MHz 32-Bit M68K MPU | Freescale | 68-PLCC
MC68HC000CEI16R

MC68HC000CEI16R - 16MHz 32-Bit M68K MPU | Freescale | 68-PLCC

The Freescale (formerly Motorola, now NXP) MC68HC000CEI16R is a 32-bit reduced-power HCMOS implementation of the M68000 microprocessor family, clocked at 16 MHz and packaged in a 68-pin Plastic Leaded Chip Carrier (PLCC). The "EC000" silicon is the static, low-power variant of the original MC68000 and adds a fully static core that allows the clock to be stopped while preserving register state, making it well suited to low-power and battery-backed industrial designs. The device exposes the classic M68000 programming model with eight 32-bit data registers and eight 32-bit address registers, a 16-bit external data bus, and a 24-bit address bus capable of accessing 16 Mbytes of linear memory. A microprocessor (MPU) is the central control unit of an embedded computer system: it fetches instructions from memory, decodes them, and executes arithmetic, logic, and control operations that orchestrate peripherals and external hardware. The MC68HC000 belongs to the 32-bit CISC (Complex Instruction Set Computer) microprocessor hierarchy - within the broader semiconductor category it sits alongside RISC controllers (ARM, MIPS, RISC-V), DSPs, and microcontrollers (MCUs) that integrate memory and peripherals. CISC MPUs like the M68K family emphasize orthogonal addressing modes and a flat memory model that simplifies assembly programming and legacy code migration. Key features of the MC68HC000CEI16R include 16 MHz sustained operation from a single 5 V (or 3.3 V system) supply, 32-bit internal registers with a 16-bit external data path, a 24-bit address bus (16 Mbyte address space), seven user-programmable address space types, fully static operation for clock-stopped standby, and 56 maskable interrupt vectors. The static core is particularly valuable for handheld terminals, instrumentation, and standby/keep-alive subsystems where average power matters more than peak compute. Architecturally, the device combines a microcoded bus controller with a two-stage instruction pipeline, hidden bus arbitration through the Bus Grant and Bus Request signals, and a privileged/supervisor mode for protected operating systems. The die is manufactured in a 0.5 µm HCMOS process that delivers roughly 5 MIPS at 16 MHz - modest by modern standards but ample for legacy control loops, serial protocol bridging, and motor control. Typical applications include industrial PLCs, factory automation controllers, point-of-sale terminals, legacy aerospace ground equipment, and industrial protocol bridges. The M68K instruction set also makes it a popular drop-in upgrade for aging MC68000 systems that need a lower-power part without rewriting firmware. Design consideration: the 68-PLCC footprint is non-trivial and most modern designs prefer the QFP variant; verify tooling, programming voltage, and bus timing (DTACK, BR, BG) against the MC68HC000 family datasheet before retrofitting existing PCBs. A real-time clock and watchdog are not integrated - pair the MPU with an external supervisor if deterministic reset behavior is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC68HC000CRC8 - 8MHz 32-Bit M68k MPU PGA68 | NXP / Motorola
MC68HC000CRC8

MC68HC000CRC8 - 8MHz 32-Bit M68k MPU PGA68 | NXP / Motorola

The NXP / Motorola MC68HC000CRC8 is a static HCMOS 32-bit microprocessor in the M68000 family, running at 8 MHz and housed in a 68-pin ceramic/ceramic-PGA (CPGA-68, 26.92x26.92 mm) through-hole package. Marking suffix "CRC8" decodes as: C = ceramic package, RC = PGA pin-grid-array form factor, 8 = 8 MHz CPU clock. It implements the M68k instruction set and includes a low-power HCMOS implementation of the original MC68000, with 8 32-bit data registers and 8 32-bit address registers, full 32-bit internal data paths, and a 16-bit external data bus with 24-bit external address bus. A microprocessor (MPU) is the central processing unit of a computer system, executing instructions fetched from memory and orchestrating data movement between peripherals. The MC68HC000 belongs to the CISC (Complex Instruction Set Computer) microprocessor family, within the broader hierarchy of microcontrollers and microprocessors, then to processors and finally to digital semiconductors. Synonymous terms include CPU, central processor, and processor IC. As a member of the M68000 family of 16/32-bit processors, it sits alongside the original MC68000 (NMOS), the low-power MC68HC000 (HCMOS), the bus-compatible MC68HC001, and the reduced-pin-count MC68EC000. Key features include 8 MHz maximum CPU clock, 5 V single-supply operation, 32-bit internal architecture, 16-bit external data bus, 24-bit address space (16 MB), vectored interrupt controller supporting seven autovector levels plus 192 software vectors, and on-chip bus arbitration for systems with multiple bus masters. The HCMOS implementation cuts power consumption relative to the original NMOS MC68000 by roughly an order of magnitude while preserving object-code compatibility. Typical applications include legacy industrial controllers, educational single-board computers, retro-computing platforms, telecom switching hardware, and avionics upgrades. The wide software base (Unix-like systems, real-time executives, custom firmware) and broad support ecosystem keep the part relevant for long-life-cycle equipment. When designing with the MC68HC000CRC8, place bulk decoupling capacitors near each VCC/GND pair and provide clean 5 V power to ensure clock integrity; a slow rise on VCC can cause undefined CPU state at power-up, so a proper reset supervisor is recommended.

Cotação Contato
MC68HC000EI20 - 20MHz 32-Bit MPU, 68-PLCC | NXP / Freescale
MC68HC000EI20

MC68HC000EI20 - 20MHz 32-Bit MPU, 68-PLCC | NXP / Freescale

The NXP / Freescale MC68HC000EI20 is a 20 MHz 32-bit CISC microprocessor from the M68000 (EC000) family, packaged in a 68-pin PLCC (24.21 x 24.21 mm, J-lead) and rated for the 0C to +70C commercial temperature range. It integrates a 32-bit programming model with a 16-bit external data bus and a 24-bit address bus, delivering up to 16 MB of linear addressing and 8/16/32-bit operand support. The 'EI' suffix indicates an industrial/commercial grade plastic-leaded chip carrier variant. A microprocessor (MPU) is the central processing unit of a computer system, executing instruction fetch, decode, and execution cycles. The MC68HC000 belongs to the M68000 family hierarchy: MPU -> CISC microprocessor -> 32-bit processor -> complex instruction set computer -> integrated circuit. Compared with later RISC controllers, the M68K architecture emphasizes orthogonal register-to-register operations, a flat address space, and rich addressing modes, making it well suited to systems that benefit from legacy code reuse. Key features of the MC68HC000EI20 include a 20 MHz internal clock, 7.5 MIPS peak Dhrystone-class throughput, a low-power HCMOS process (the 'HC' in HC000), a 56-bit vectored interrupt structure with seven interrupt priority levels, and a synchronous bus interface with selectable 8- or 16-bit external data bus width. The HCMOS core delivers substantially lower power consumption than the original NMOS MC68000 while preserving full object-code compatibility with the M68000 instruction set. Typical applications include industrial automation controllers, legacy M68K embedded platforms, automotive telematics and body controllers (via the automotive-grade sister MC68HC000AEI series), point-of-sale terminals, networking line cards, and educational/prototyping boards. The PLCC-68 footprint and 5 V single-supply operation allow straightforward integration into legacy M68K system designs that were manufactured through the 1990s and early 2000s. When designing with this MPU, ensure the external clock source meets the 20 MHz specification with appropriate duty-cycle stability, and provide proper bus-termination for the 16-bit data bus to avoid signal-integrity issues at full speed. Designers migrating from the original NMOS MC68000 should evaluate the lower power dissipation and identical pinout of the HC000, which generally allows direct PCB reuse. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design considerations that complement the manufacturer datasheet and the broader M68000 family user manual.

Cotação Contato
MC68HC000IEI16 - 32-Bit 16MHz M68000 MPU, 68-PLCC | NXP
MC68HC000IEI16

MC68HC000IEI16 - 32-Bit 16MHz M68000 MPU, 68-PLCC | NXP

The NXP MC68HC000IEI16 is a 32-bit M68000 family microprocessor (MPU) running at 16 MHz, housed in a 68-pin PLCC package measuring 24.21 x 24.21 mm. It delivers full 32-bit internal data and address paths while keeping a 16-bit external data bus for system cost efficiency, making it a classic drop-in choice for legacy M68k designs and industrial control boards. A microprocessor (MPU) is the central processing unit of an embedded computer system, integrating an arithmetic logic unit, register file, and control logic into a single IC. It sits at the top of the digital hierarchy: transistor -> logic gate -> register -> MPU core -> embedded system. The M68000 family introduced 32-bit programming registers while preserving an 8/16-bit external memory interface, an architecture that powered early Apple Macintosh, Atari ST, and Sega Genesis systems and remains embedded in industrial, aerospace, and telecommunications platforms today. Key features of the MC68HC000IEI16 include 16 MHz maximum clock frequency, 32-bit internal registers, 24-bit address bus supporting 16 MB linear addressing, a 56 instruction set with 14 addressing modes, and seven 32-bit general-purpose data registers plus eight 32-bit address registers. Static CMOS (HCMOS) implementation yields low power dissipation compared with the original NMOS MC68000. Architecturally, the MC68HC000IEI16 implements the M68000 instruction set, including memory-mapped I/O, supervisor/user privilege levels, and a hardware multiply/divide unit. Its synchronous bus interface requires an external clock driver (e.g., MC68846 or simple oscillator gating) and separate address strobe / data strobe handshakes, enabling zero-wait-state operation with appropriately rated memory. Typical applications include industrial PLC controllers, factory automation HMIs, telecom line cards, medical instrumentation, and legacy aerospace retrofits. The 68-PLCC footprint with J-leads survives repeated socket cycles in development and field-service applications. When designing with this MPU, plan for a reset controller (MC3406 or equivalent), a watch-dog timer for industrial deployments, and a bus arbiter if DMA peripherals are added. The 16-bit data bus halves memory cost versus a true 32-bit CPU but limits throughput for high-bandwidth signal processing. This page combines distributor stock and pricing for the MC68HC000IEI16, cross-referenced drop-in alternatives, and practical design notes not aggregated on any single distributor listing.

Cotação Contato
MC68HC000IEI16R - 16MHz 32-bit M68K MPU, 68-PLCC | NXP
MC68HC000IEI16R

MC68HC000IEI16R - 16MHz 32-bit M68K MPU, 68-PLCC | NXP

The NXP Semiconductors MC68HC000IEI16R is a high-performance 32-bit HCMOS microprocessor (MPU) from the classic M68000 family, operating at 16 MHz and housed in a 68-pin PLCC (Plastic Leaded Chip Carrier) package measuring 24.21 mm x 24.21 mm. It integrates a single EC000 core with a 32-bit programming model and 16-bit external data bus, and is supplied by a single 5.0 V I/O rail. The 'IEI' suffix denotes the industrial operating temperature grade (-40C to +85C) while 'R' indicates tape-and-reel packaging, and the '16' speed grade sets the 16 MHz bus frequency. What is a 32-bit MPU/M68000 microprocessor? An MPU (Microprocessor Unit) is an integrated processor that requires external memory and peripherals to form a complete computer system. The Motorola/NXP 68000 (M68K) family introduced a flat 32-bit programming model with 24-bit external address space, fifteen general-purpose 32-bit data registers, and eight 32-bit address registers, and is the architectural ancestor of the ColdFire family. The MC68HC000 variant is the original HCMOS (high-speed CMOS) implementation, balancing low power consumption with deterministic real-time interrupt handling, which made it the dominant embedded CPU of the 1980s and 1990s in industrial controllers, laser printers, telecom switches, and arcade systems. Key features of the MC68HC000IEI16R include a 16 MHz maximum CPU clock yielding approximately 2 MIPS peak throughput, a 16-bit external data bus multiplexed onto the 32-bit internal register file, an asynchronous bus interface with DTACK handshaking that supports slow peripherals without glueless logic glue, a vectored interrupt controller with seven autovector levels and 256 programmable vectors, a supervisor/user privilege model with separate stack pointers, and instruction prefetch with a 4-byte queue. The device is a static-core design, allowing the clock to be stopped for low-power wait states. Architecturally, the M68K ISA uses a flat non-segmented memory model, two-address orthogonally organized instruction set, and efficient bit-field operations including BCHG, BCLR, BSET, BTST, and TAS, which makes firmware development unusually compact. Compared to the original MC68000, the MC68HC000 reduces active current draw by roughly a factor of 5x thanks to HCMOS fabrication, while retaining object-code compatibility. Typical applications include industrial PLC controllers, automotive engine management ECUs (legacy), telecom switching fabrics, point-of-sale terminals, medical instrumentation, military and aerospace embedded systems, vintage arcade/gaming hardware (Sega System 16/18, Amiga 500 early revs, Atari ST), and legacy upgrade/repair scenarios where original 68000 sockets must be repopulated. The wide third-party ecosystem of assemblers, compilers, RTOSes (pSOS, VRTX, OS-9), and emulators makes this part a familiar workhorse for maintenance engineers. When designing with this MPU, observe the asynchronous bus termination rules: every memory cycle must assert DTACK or be aborted with BERR, otherwise the bus will hang. Add a watchdog timer or external supervisor to recover from bus faults, and pay attention to the 24-bit address space limit (16 MB), which constrains modern memory expansion. This page synthesizes distributor pricing, cross-reference alternatives, and practical design notes that go beyond what is found in the manufacturer datasheet alone, helping sourcing engineers and maintenance designers evaluate the MC68HC000IEI16R for both new designs and legacy field support.

Cotação Contato
MC68HC000RC12 - 12MHz 32-bit M68K MPU, 68-PGA | NXP
MC68HC000RC12

MC68HC000RC12 - 12MHz 32-bit M68K MPU, 68-PGA | NXP

The NXP MC68HC000RC12 is a 12 MHz, 32-bit HCMOS microprocessor from the M68000 (M68K) family, packaged in a 68-pin ceramic PGA (Pin Grid Array) and specified for 5 V operation. It is a static, fully-static design with low power consumption, internal 32-bit registers, and a 16-bit external data bus, making it a popular drop-in upgrade for legacy MC68000 designs that need lower power draw. The "RC12" suffix indicates the 12 MHz speed grade and the PGA ceramic package. What is a microprocessor in the M68K family? The M68K (Motorola 68000) architecture is a CISC 32-bit microprocessor family first introduced by Motorola in 1979. It uses a 32-bit programming model (eight data registers A0-A7, A7 being the stack pointer, and eight address registers D0-D7) with a 16-bit external data path on most variants, and addresses a 24-bit (16 MB) memory space. Through successive generations (MC68000, MC68HC000, MC68EC000, MC68010, MC68020, MC68030, MC68040, MC68060), it powered classic workstations (Sun-1, early Macintosh, Atari ST, Amiga), arcade systems, embedded controllers, and aerospace equipment. The MC68HC000 differs from the original NMOS MC68000 by using HCMOS fabrication, which cuts typical power consumption roughly in half while maintaining object-code compatibility with the original instruction set. Key features of the MC68HC000RC12 include a 12 MHz maximum clock, a 16-bit asynchronous data bus, a 24-bit address bus (16 MB address space), seven interrupt levels (IPL0-IPL2), a vectored interrupt controller, and a 32-bit barrel shifter on chip. Static operation allows the clock to be stopped for low-power standby modes, useful in battery-backed industrial and instrumentation equipment. Architecturally, the part integrates microcoded CISC instructions with a three-stage pipeline (instruction fetch, decode, execute) and supports addressing modes such as pre-decrement, post-increment, and indexed with displacement and scaling on later variants. The 68-PGA ceramic package provides rugged mechanical and thermal characteristics suited to industrial, military, and aerospace environments where plastic packages would be insufficient. Typical applications include legacy industrial control systems, telecommunications switching equipment, factory automation PLCs, military and aerospace embedded controllers, and retro-computing restorations. The ceramic PGA is also favored in defense and avionics programs where hermetic packaging is mandated. The wide supply tolerance and low quiescent current also suit instrumentation with isolated power. When designing with the MC68HC000RC12, ensure a minimum of two wait states for slow peripherals unless external cycle-stealing logic is added; the part shares its bus cycle timing with the MC68000, so MC68000 reference schematics remain valid with HCMOS power-supply adjustments. Designers upgrading from MC68000 should verify HCMOS-specific timing parameters in the latest NXP datasheet. This page synthesizes distributor pricing, drop-in pin-compatible M68K alternatives, and practical design notes not found in the legacy Motorola datasheets. Lifecycle status, current stock, and 12 MHz part variants have been cross-checked against NXP and authorized distributors as of 2026-10-17.

Cotação Contato
MC68HC000RC8 - 8MHz 32-Bit M68k MPU PGA | NXP
MC68HC000RC8

MC68HC000RC8 - 8MHz 32-Bit M68k MPU PGA | NXP

The NXP Semiconductors MC68HC000RC8 is a 32-bit CISC microprocessor (MPU) from the classic M68000 (M68k) family, operating at 8 MHz and housed in a 68-pin Pin Grid Array (PGA / 26.92 x 26.92 mm) ceramic package. The HC variant is the static, low-power CMOS re-implementation of the original Motorola MC68000, providing the same instruction set, programmer's model, and 32-bit internal registers while drawing substantially less current than the original NMOS part. What is an MPU (microprocessor unit)? An MPU is a central processing unit that requires external memory, bus controllers, and peripherals - in contrast to a microcontroller (MCU) which integrates those blocks on-chip. The MC68HC000 belongs to the historical M68000 MPU taxonomy: MPU -> CISC processor -> 32-bit processor -> general-purpose computing core. It sits upstream of any peripheral logic and orchestrates instruction fetch, decode, and execution across a 24-bit external address bus and a 16-bit external data bus. Key features include an 8 MHz operating frequency, 32-bit internal data paths and registers, 16-bit external data bus, 24-bit address bus (16 MByte linear addressing), 56 hardware-instruction-strong instruction set, seven 32-bit general-purpose data registers, eight 32-bit address registers, supervisor and user operating modes with privileged instructions, a hardware vectored interrupt structure with seven autovectored levels, a Motorola bus architecture that is easy to interface to SRAM, DRAM and glue logic, and full static operation allowing the clock to be stopped for low-power debug. The architecture is the well-known Motorola M68k CISC core. The part is a static-CMOS re-spin of the original MC68000, fabricated in HCMOS, with all 32-bit registers, the same programming model, and the same exception stack frame as the original. The 8 MHz speed grade delivers approximately 0.5 MIPS sustained throughput, which is more than adequate for industrial controllers, embedded training platforms, retro-computing boards, and legacy telecommunications infrastructure. Typical applications include industrial control, process automation, military and aerospace retrofits, vintage computing reproductions, communications infrastructure, embedded development platforms and education. Designers choose this part when they need bit-for-bit compatibility with the original MC68000 instruction set, often because they are maintaining a long-lifecycle legacy system or building a hobby/educational M68k single-board computer. When designing with the MC68HC000RC8, ensure 5V tolerance on VCC, add proper bus-termination and decoupling, and consider the bus-state controller (e.g., MC68851 MMU-less configuration) for DMA. The PGA package is a through-hole ceramic footprint suitable for socketed or PCB-thru-hole assembly, making it ideal for prototyping and field-replaceable modules. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC68HC001EI10 - M68000 32-bit MPU 10MHz 5V PLCC-68 | NXP
MC68HC001EI10

MC68HC001EI10 - M68000 32-bit MPU 10MHz 5V PLCC-68 | NXP

The NXP MC68HC001EI10 is a 32-bit reduced-pin-count version of the Motorola MC68000 microprocessor (MPU) operating at 10 MHz, housed in a 68-pin PLCC (Plastic Leaded Chip Carrier) J-lead package. It implements the EC000 core, providing full MC68000 instruction-set compatibility in a compact 68-pin footprint rather than the original 64-pin DIP form factor. An MPU (microprocessor unit) is the central processing unit of a computing system that fetches, decodes, and executes instructions from external memory. The M68000 family — historically Motorola's flagship 16/32-bit CISC architecture — sits in the taxonomy: MPU -> microprocessor -> central processing unit -> processor IC -> integrated circuit. The HC001 variant in particular is the static HCMOS re-implementation designed for low-power, bus-oriented embedded designs that retain M68000 software compatibility. Key features include a 32-bit internal data path with a 16-bit external data bus, a 24-bit address bus providing 16 MB linear addressing, 8 32-bit general-purpose data registers, and 8 32-bit address registers. The static HCMOS process enables clock frequencies from DC up to 10 MHz, and the device supports a 5 V I/O voltage. Integrated peripherals include asynchronous bus arbitration (DTACK, BR, BG), interrupt acknowledge logic, and a function-code/status output for memory-mapped peripherals. Architecturally, the EC000 core preserves the original MC68000 programmer's model and instruction set while shrinking the pin count from 64 to 68 and removing the separate VBB supply. The HC001 retains the same interrupt structure (7 levels), supervisor/user privilege model, and the full 68000 instruction set, making it a drop-in replacement for many existing M68000 designs seeking lower power or reduced board area. Typical applications include legacy industrial control systems, telecommunications controllers, point-of-sale terminals, automotive ECU prototypes, and M68000 software-development platforms. The 68-pin PLCC package simplifies socketed prototyping and field replacement, and the 5 V operation simplifies integration with classic peripheral logic families. When designing with this device, place decoupling capacitors close to all VCC pins and provide a robust 4.9152 MHz crystal-derived clock with the proper duty cycle. Engineers migrating from the original 64-pin MC68000 must redesign the address-bus capture and qualify the asynchronous bus-arbiter timing, since the HC001 multiplexes a portion of the upper address lines on the PLCC footprint. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone — supporting rapid sourcing decisions for engineers maintaining or extending M68000-era designs.

Cotação Contato
MC68HC001EI12 - 12MHz 32-bit M68000 MPU | NXP | 68-PLCC
MC68HC001EI12

MC68HC001EI12 - 12MHz 32-bit M68000 MPU | NXP | 68-PLCC

The NXP MC68HC001EI12 is a 32-bit M68000 family microprocessor (MPU) running at 12 MHz, supplied in a 68-pin PLCC (J-Lead) package measuring 24.21 x 24.21 mm. It is a static-HCMOS implementation of the Motorola EC000 core with a 16-bit external data bus and 24-bit external address bus, delivering CISC performance at low power consumption for embedded control. A microprocessor (MPU) is an integrated CPU that fetches, decodes, and executes machine instructions from external memory. The M68K family sits within the broader taxonomy: CISC microprocessor -> M68000 architecture -> embedded MPU -> 32-bit processor IC. Compared to its predecessor MC68000, the EC000 simplifies the bus interface and lowers power draw while preserving the M68K instruction set. Key features include a 12 MHz maximum clock, a 16-bit data bus, 24-bit address bus, eight 32-bit data registers, and seven 32-bit address registers for an orthogonal programming model. The HC001 derivative integrates a small instruction/data cache configuration versus the bare EC000, reducing memory-fetch stalls on tightly-coded loops. Five operating modes (User, Supervisor, Trace, Emulation, and Halt) and seven exception vectors support real-time and debugging workflows. Fabricated in HCMOS III process, the part operates from a 5 V I/O supply and is fully static, allowing clock speeds to be reduced to DC for power-sensitive applications. Designers benefit from a stable, long-lifecycle instruction set used across automotive, industrial, and aerospace legacy platforms. Typical applications include industrial automation controllers, embedded human-machine interface (HMI) terminals, legacy telecom infrastructure, point-of-sale terminals, and avionics retrofit boards. The mature toolchain - including GNU as and GCC68K - keeps the part relevant for maintenance of deployed fleets. When designing with the MC68HC001EI12, ensure sufficient decoupling: place 0.1 uF ceramic bypass caps adjacent to each power pin, and consider a 10 uF bulk cap at the 5 V rail. Watch for the EC000's bus-cycle timing - it differs subtly from the original MC68000 and may surprise maintainers who are upgrading legacy boards. This page synthesizes distributor pricing, drop-in alternatives within the M68K family, and practical design guidance beyond what is in the original manufacturer datasheet - making it a one-stop reference for engineers maintaining 68K-based designs.

Cotação Contato
MC68HC001EI16 - 32-Bit M68000 MPU, 16MHz, 68-PLCC | NXP
MC68HC001EI16

MC68HC001EI16 - 32-Bit M68000 MPU, 16MHz, 68-PLCC | NXP

The NXP (Freescale) MC68HC001EI16 is a 32-bit M68000-family microprocessor (MPU) running at 16 MHz, housed in a 68-pin PLCC (24.21 x 24.21 mm) J-leaded package. It is a low-cost, low-power static version of the original MC68000, manufactured in HCMOS technology and pin-compatible with the MC68000 in the PLCC-68 footprint. The 'EI' suffix denotes the industrial temperature grade and the '16' indicates a 16 MHz maximum clock frequency. A microprocessor (MPU) is the central processing unit of an embedded computer system, integrating the ALU, registers, instruction decoder, bus controller, and interrupt logic on a single die. Within the broader semiconductor taxonomy, the MC68HC001 belongs to the 32-bit CISC microprocessor family -> M68000 instruction set architecture -> Motorola/NXP embedded MPU lineage -> general-purpose embedded processing. The HC001 variant specifically drops the integrated MMU of the MC68010/MC68020 while keeping the original 32-bit programming model, address and data buses. Key features include a 32-bit internal data path with 16-bit external data bus, 24-bit address bus (16 MB linear), 8 32-bit data registers, 8 32-bit address registers, 7 interrupt levels, and a vectored interrupt controller. The device operates from a single 5 V supply and supports dynamic bus sizing to access 8-bit and 16-bit peripherals seamlessly. It uses a static core design allowing clock rates down to DC, useful for low-power or step-debug applications. Typical applications include industrial control, legacy embedded systems, automotive body controllers, communications equipment, point-of-sale terminals, and avionics retrofits where the M68000 instruction set must be retained. Because the part is mature, it is commonly used as a drop-in replacement for the original MC68000 in existing 68-pin PLCC designs. When designing with the MC68HC001, take care to provide a clean, monotonic 5 V supply and a stable clock. Decoupling with 100 nF ceramic capacitors at each Vcc pin is mandatory. Designers migrating from the original MC68000 benefit from identical bus timing, so existing memory and peripheral interfaces typically work without modification.

Cotação Contato
MC68HC001EI8 - 8MHz 32-Bit MPU M68000 | 68-PLCC | NXP
MC68HC001EI8

MC68HC001EI8 - 8MHz 32-Bit MPU M68000 | 68-PLCC | NXP

The NXP MC68HC001EI8 is a static-HC version of the classic Motorola MC68000 microprocessor, integrating the full 32-bit EC000 core with a 16-bit external data bus and 24-bit external address bus. It operates at 8 MHz, comes in a 68-PLCC (24.21 x 24.21 mm) surface-mount package, and targets 5V I/O designs. This part is sourced through authorized distributors and remains a supported legacy MPU for industrial and embedded upgrades. What is a 32-Bit MPU? A microprocessor unit (MPU) is a CPU-only device that requires external memory and peripherals. The M68000 family is a classic 16/32-bit CISC architecture introduced in 1979, widely adopted in early Unix workstations, arcade systems, and military/avionics embedded controllers. An MPU like the MC68HC001EI8 is distinguished from a microcontroller (MCU) by lacking on-chip Flash, RAM, and peripherals. Positioned in the taxonomy: MPU -> microprocessor -> central processing unit -> processor -> semiconductor. Key features include a 32-bit internal data path with 16-bit external data bus, 24-bit external address space (16 MB), seven 32-bit data and eight 32-bit address registers, hardware multiply and divide (signed and unsigned), 4 GB linear address space in supervisor mode, and 56 instructions with 14 addressing modes. The HCMOS implementation reduces power versus the original NMOS MC68000. The MC68HC001 uses a microcoded bus state machine with asynchronous handshaking, separate function code pins (FC0-FC2) for bus cycle type encoding, and a vectored interrupt structure with seven autovector levels plus a non-maskable interrupt (IPL0-IPL2). Compared to the original MC68000, the 'HC001 version adds static operation (DC to 8 MHz), reduced power (HCMOS), and a 16-bit data bus (MC68000 was 32-bit data), shrinking cost and board space. Typical applications include industrial control retrofits, legacy M68000 hardware maintenance, military/aerospace long-life-cycle systems, education/reference platforms, and embedded motor control where the 16-bit data bus is sufficient. The MC68HC001EI8 remains in demand for sustaining engineering of legacy designs in industrial automation and aerospace. When designing with this part, note the 5V-only I/O (3.3V-tolerant interfaces need transceivers), the 16-bit data bus (use twice the bus cycles versus the full 32-bit MC68000 for 32-bit data), and the need for external interrupt glue logic if non-68000 peripherals are present. Verify thermal and reflow profiles for the 68-PLCC J-leaded package. This page synthesizes distributor pricing, application context, and cross-reference data for the MC68HC001EI8 that are not consolidated on the manufacturer legacy product page.

Cotação Contato
MC68HC11D0CFB2 - 8-Bit 2MHz ROMless MCU 44-QFP | Freescale
MC68HC11D0CFB2

MC68HC11D0CFB2 - 8-Bit 2MHz ROMless MCU 44-QFP | Freescale

The Freescale Semiconductor (formerly Motorola) MC68HC11D0CFB2 is an 8-bit microcontroller from the M68HC11 / M680x0 family, based on the 6800-compatible CPU core running at up to 2 MHz in HCMOS technology, packaged in a 44-pin QFP (10x10 mm, PQFP-44) surface-mount package. It is a ROMless device, meaning program code is executed from external memory, making it suitable for external-memory system designs and legacy board repairs. An 8-bit microcontroller is an integrated circuit that combines a CPU core, memory, timing logic, and general-purpose I/O on a single die. The M68HC11 family extends the classic Motorola 6800 architecture with additional on-chip peripherals and low-power HCMOS process technology, sitting within the broader hierarchy of embedded microcontroller units (MCUs) alongside the later HC08, HCS08, and S12 families. Key features of the MC68HC11D0CFB2 include the 2 MHz bus operation that delivers predictable, deterministic instruction timing, ROMless program storage for externally supplied code, and the well-documented M68HC11 instruction set that remains in wide use in industrial maintenance and education. The 44-QFP (10x10 mm) footprint provides a reasonable pin count for external address and data buses while remaining hand-solderable in prototype and repair contexts. Architecturally, the device executes the M68HC11 instruction set over the 6800 CPU core, using HCMOS fabrication for reduced power consumption compared with earlier NMOS parts. Because the part is ROMless, system designers supply program storage externally, which simplifies firmware updates during development and allows the same silicon to serve multiple code images. Typical applications include legacy industrial control equipment, automotive subsystem maintenance, motor control retrofit boards, and test fixtures built around the M68HC11 ecosystem. Many long-life industrial machines still depend on this family, driving continued demand for authorized replacements. Design consideration: since the MCU is ROMless, verify that your board provides external EPROM/Flash and address latching, and confirm bus timing at your chosen crystal frequency against the 2 MHz maximum rating. This page synthesizes distributor pricing (as of 2026-10-18), drop-in alternatives including Tekmos engineered replacements, and practical sourcing notes not found in the manufacturer datasheet.

Cotação Contato
MC68HC11E0CFN2R2 - 8-Bit 2MHz ROMless HC11 MCU, 52-PLCC | NXP
MC68HC11E0CFN2R2

MC68HC11E0CFN2R2 - 8-Bit 2MHz ROMless HC11 MCU, 52-PLCC | NXP

The NXP (formerly Motorola/Freescale) MC68HC11E0CFN2R2 is an 8-bit M68HC11E-series microcontroller running at 2 MHz with a ROMless memory architecture, housed in a 52-pin PLCC (19.13 x 19.13 mm) surface-mount package with J-bend leads. It belongs to the M68HC11E family of HC11 microcontrollers targeted at industrial embedded control, with M68HC11E0 denoting the ROMless variant (no on-chip program memory, requiring external memory mapped into the address space). It is supplied on tape-and-reel (R2 suffix). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, ROM/Flash, and programmable peripherals (timers, serial ports, A/D converters) into one device. The M68HC11 architecture is a von-Neumann 8-bit accumulator-based CPU with two 8-bit accumulators (A and B) plus a 16-bit double accumulator (D), 16-bit index register (IX/IY), 64-byte register block with stack pointer (SP) and program counter (PC), and a rich on-chip peripheral set. ROMless variants, like the E0, target systems where firmware stability, in-application programming, or code confidentiality (via external masked ROM or EPROM) is required. Key features include 2 MHz bus clock (1 MHz internal E-clock), 0 bytes of on-chip ROM (external memory expansion supported up to 64 KB), 0 bytes of on-chip EEPROM, 256 bytes of on-chip RAM, an 8-channel 8-bit A/D converter, asynchronous serial communications interface (SCI), serial peripheral interface (SPI), 16-bit timer with input capture/output compare (IC/OC), and a 16-bit pulse accumulator. The device supports low-power Stop and Wait modes and operates across 3.0 V to 5.5 V supply range per the M68HC11E family specification, with 5 V typical industrial-grade operation. The HC11 core uses an 8-bit ALU with a 16-bit address bus, providing 64 KB of linear program address space. The expanded mode allows external memory to be mapped transparently. The CPU instruction set includes 145+ opcodes covering bit manipulation, indexed addressing, and signed arithmetic, with most instructions executing in 2-5 bus cycles. Typical applications include industrial control systems, automotive body and chassis electronics (pre-CAN modules), appliance controllers, HVAC controls, security and fire-alarm panels, instrumentation, and legacy factory automation. Its wide operating voltage and robust peripheral set made it an industry-standard 8-bit platform through the 1990s and early 2000s. When designing with this device, attention to PLCC socket selection (production vs. prototyping) and emulator/Debug-mode support is critical. The MC68HC11E0 has a single-chip and expanded-multiplexed mode; correct mode-strapping of the MODA/MODB pins is required for boot mode selection. Designers should also retain a compatible 68HC11 BUFFALO monitor or use a third-party PKG11E toolchain for development. This page synthesizes live distributor pricing, drop-in compatible alternatives from the same M68HC11 family, and practical design notes not found in the standalone datasheet excerpt.

Cotação Contato
MC68HC11E0CFNE3 - 8-Bit HC11 MCU, 512B RAM, ROMless 52-PLCC | NXP (Tape & Reel)
MC68HC11E0CFNE3

MC68HC11E0CFNE3 - 8-Bit HC11 MCU, 512B RAM, ROMless 52-PLCC | NXP (Tape & Reel)

The NXP MC68HC11E0CFNE3 is an 8-bit ROMless CISC microcontroller from the M68HC11E family, featuring the M68HC11 CPU core operating at 3 MHz with 512 bytes of on-chip RAM and no internal program memory. It is housed in a 52-pin PLCC (Plastic Leaded Chip Carrier) surface-mount package supplied on Tape & Reel, intended for automotive-grade applications requiring external program storage. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals on one die. The HC11 family belongs to the CISC (Complex Instruction Set Computer) lineage originating from the Motorola 6800 and is widely used in legacy automotive, industrial, and consumer designs. The 'E' series adds enhanced peripherals such as a 16-bit timer, 8-channel 8-bit ADC, and configurable serial interfaces, while the 'E0' sub-variant denotes the ROMless configuration that requires external program memory, allowing designers to use EPROM, EEPROM, or flash for firmware storage. Key features include 512 bytes of on-chip RAM, 38 I/O lines, an 8-channel 8-bit ADC, an asynchronous NRZ SCI (Serial Communications Interface), an SPI peripheral, a 16-bit free-running counter with pulse accumulator, and computer-operating-properly (COP) watchdog timer. Power-saving stop and wait modes reduce quiescent current, and the device operates from a single 5 V supply. It is qualified to automotive-grade reliability standards and supports 0 to 70 C or -40 to +105 C temperature ranges depending on sub-variant. The MC68HC11E0CFNE3 uses a Von Neumann architecture with a 16-bit address space, allowing up to 64 KB of external memory mapping. The 52-pin PLCC package provides ample I/O access for parallel expansion, external memory bus, and analog inputs. ROMless operation gives OEMs the flexibility to validate firmware in EPROM during development before committing to masked-ROM production volumes. Typical applications include automotive engine control units (ECUs), body controllers, instrument clusters, industrial process controllers, and legacy embedded systems originally designed around the HC11 instruction set. The ROMless configuration makes it especially suitable for prototype builds and low-volume production where EPROM-based firmware iteration is preferred. When designing with this device, ensure the external program memory interface is properly decoded using the HC11's built-in chip-select logic to avoid bus contention. Place decoupling capacitors close to VDD/VSS pairs and follow NXP's HC11 EMI layout guidelines for noisy automotive environments. This page synthesizes distributor stock levels, drop-in same-package alternatives from the HC11E family, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and substitution decisions on this legacy MCU.

Cotação Contato
MC68HC11E0CFNE3R - 8-Bit HC11 MCU, 512B RAM, ROMless 52-PLCC | NXP
MC68HC11E0CFNE3R

MC68HC11E0CFNE3R - 8-Bit HC11 MCU, 512B RAM, ROMless 52-PLCC | NXP

The NXP MC68HC11E0CFNE3R is an 8-bit ROMless CISC microcontroller from the M68HC11E family, featuring the M68HC11 CPU core operating at 3 MHz with 512 bytes of on-chip RAM and no internal program memory. It is housed in a 52-pin PLCC (Plastic Leaded Chip Carrier) surface-mount package supplied on Tape & Reel, intended for automotive-grade applications requiring external program storage. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals on one die. The HC11 family belongs to the CISC (Complex Instruction Set Computer) lineage originating from the Motorola 6800 and is widely used in legacy automotive, industrial, and consumer designs. The 'E' series adds enhanced peripherals such as a 16-bit timer, 8-channel 8-bit ADC, and configurable serial interfaces, while the 'E0' sub-variant denotes the ROMless configuration that requires external program memory, allowing designers to use EPROM, EEPROM, or flash for firmware storage. Key features include 512 bytes of on-chip RAM, 38 I/O lines, an 8-channel 8-bit ADC, an asynchronous NRZ SCI (Serial Communications Interface), an SPI peripheral, a 16-bit free-running counter with pulse accumulator, and computer-operating-properly (COP) watchdog timer. Power-saving stop and wait modes reduce quiescent current, and the device operates from a single 5 V supply. It is qualified to automotive-grade reliability standards and supports 0 to 70 C or -40 to +105 C temperature ranges depending on sub-variant. The MC68HC11E0CFNE3R uses a Von Neumann architecture with a 16-bit address space, allowing up to 64 KB of external memory mapping. The 52-pin PLCC package provides ample I/O access for parallel expansion, external memory bus, and analog inputs. ROMless operation gives OEMs the flexibility to validate firmware in EPROM during development before committing to masked-ROM production volumes. Typical applications include automotive engine control units (ECUs), body controllers, instrument clusters, industrial process controllers, and legacy embedded systems originally designed around the HC11 instruction set. The ROMless configuration makes it especially suitable for prototype builds and low-volume production where EPROM-based firmware iteration is preferred. When designing with this device, ensure the external program memory interface is properly decoded using the HC11's built-in chip-select logic to avoid bus contention. Place decoupling capacitors close to VDD/VSS pairs and follow NXP's HC11 EMI layout guidelines for noisy automotive environments. This page synthesizes distributor stock levels, drop-in same-package alternatives from the HC11E family, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and substitution decisions on this legacy MCU.

Cotação Contato
MC68HC11E0FU - 8-Bit 2 MHz ROMless MCU | Freescale
MC68HC11E0FU

MC68HC11E0FU - 8-Bit 2 MHz ROMless MCU | Freescale

The Freescale Semiconductor MC68HC11E0FU is an 8-bit, 2 MHz ROMless microcontroller IC in a 64-pin QFP package measuring 14 x 14 mm. It belongs to the M68HC11 family and is intended for embedded control systems that require external program-memory support. The verified distributor listing identifies the device as ROMless, while the exact electrical limits, memory architecture, peripheral set, operating temperature, pin functions, and supply requirements are not provided in the supplied search data. A microcontroller is a semiconductor device that integrates a processor core, memory interfaces, I/O, timers, and communication peripherals into one package. The MC68HC11E0FU is specifically a ROMless 8-bit MCU, meaning application firmware must be supplied through external memory rather than an internal program ROM. Its 2 MHz operating frequency places it in the classic embedded-control class, where deterministic control loops and portable peripheral interfaces are generally more important than high computational throughput. The verified product data confirms the key procurement-facing identity: M68HC11 series, 8-bit architecture, 2 MHz operation, ROMless configuration, and 64-QFP packaging. Because no official manufacturer PDF URL or detailed electrical tables were supplied, voltage range, RAM size, external-memory limits, I/O count, timer resources, communication blocks, environmental ratings, and absolute maximum values remain marked as data needed. Engineers should obtain the MC68HC11E Technical Data document and verify every pin and electrical limit before design release. Typical legacy embedded uses include industrial controllers, appliance controllers, motor or relay logic, data-acquisition front ends, and educational embedded platforms. In these systems, the MCU would execute control firmware from external memory, drive I/O, and coordinate timers and communications. The MC68HC11E0FU is most appropriate where an existing 68HC11 architecture, memory map, toolchain, or board design already depends on this family. A critical design consideration is that replacing an older MCU cannot be based only on matching clock speed. The external bus, memory devices, pin multiplexing, interrupt vector table, peripheral registers, timing, electrical limits, and software model must all be verified against the manufacturer documentation. The supplied web results do not establish a verified same-package, pin-to-pin drop-in replacement, so equivalent parts should not be approved solely from family-level search results. This product summary combines the verified distributor identity with explicit data-gap markers and avoids guessing technical values. It is intended to support initial sourcing and legacy-system research, while datasheet review, schematic comparison, and firmware validation remain mandatory before production use.

Cotação Contato
MC68HC11E1CFNE3R - 8-Bit 3MHz MCU 512B EE ROMless PLCC-52 | NXP
MC68HC11E1CFNE3R

MC68HC11E1CFNE3R - 8-Bit 3MHz MCU 512B EE ROMless PLCC-52 | NXP

The NXP MC68HC11E1CFNE3R is an 8-bit HC11 family CISC microcontroller running at 3 MHz, packaged in a 52-pin PLCC (FN suffix) and supplied on a 5 V rail. It is a ROMless variant of the MC68HC11E1 with 512 bytes of on-chip EEPROM, 512 bytes of RAM, and 38 general-purpose I/O lines. The 'CFNE3' suffix denotes a non-EPROM version in industrial temperature grade, while the trailing 'R' indicates Tape & Reel packaging per NXP ordering nomenclature. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals on one die. The 68HC11 architecture is a classic 8-bit CISC accumulator-based design originally introduced by Motorola and now maintained by NXP. The HC11E sub-family extends the base M68HC11 CPU with on-chip EEPROM, more RAM, expanded timer architecture, and the Serial Communications Interface (SCI) plus Serial Peripheral Interface (SPI), making it suitable for embedded control applications demanding a small instruction set with deterministic interrupt response. Key features include the M68HC11 CPU core with 16-bit index registers and bit-manipulation instructions, 512 bytes of on-chip EEPROM with block protect for security, 512 bytes of on-chip RAM with data retention during standby, a non-multiplexed expanded bus mode, and power-saving STOP and WAIT modes. Peripherals include an 8-bit/16-bit timer subsystem with input capture and output compare, an 8-channel 8-bit ADC, an SCI, an SPI, POR (Power-On Reset), and a watchdog timer. The device is designed for fully static operation down to DC clock and supports asynchronous NRZ serial communication. Architecturally, the 68HC11E1 combines a CISC CPU with a separate 16-bit program counter, two 8-bit accumulators (A and B) usable as a single 16-bit D accumulator, and three index registers (X, Y, SP). The 8-channel 8-bit successive-approximation ADC is paired with the SCI for embedded sensing, while the SPI port supports synchronous peripheral expansion. EEPROM block protect provides in-application security for calibration data, a hallmark of the 68HC11 platform. Typical applications include industrial automation controllers, automotive body and chassis ECUs (pre-CAN era), appliance control boards, security and access-control panels, and legacy embedded systems requiring deterministic interrupt response. The 5 V supply and 3 MHz clock keep it well suited to low-EMI environments, while 38 I/O lines offer generous connectivity for sensors, keypads, displays, and relays. When designing with this part, note that it is ROMless: an external program memory is mandatory and the expanded-mode bus interface must be wired to that memory. Ensure proper handling of the MODA/MODB mode pins to select single-chip vs expanded mode at reset. The MC68HC11E1CFNE3 is marked 'No Longer Manufactured' on the NXP product page, so design-in teams should plan for last-time-buy sourcing or evaluate NXP's current S08/S12/MPC families as functional successors. This page synthesizes distributor stock signals, drop-in same-package alternatives from the 68HC11E family, and design notes not found on the NXP marketing summary.

Cotação Contato
MC68HC11F1CFN4 - 8-Bit 4MHz ROMless MCU 68-PLCC | NXP
MC68HC11F1CFN4

MC68HC11F1CFN4 - 8-Bit 4MHz ROMless MCU 68-PLCC | NXP

The NXP MC68HC11F1CFN4 is an 8-bit ROMless microcontroller unit (MCU) from the M68HC11 family, operating at 4 MHz with a fully static design that allows clock rates from dc up to 4 MHz. It is housed in a 68-pin PLCC (J-Lead) package and is characterized by a nonmultiplexed expanded bus, high speed, and low power consumption. The device is supplied today by NXP USA Inc. as the inheritor of the original Motorola/Freescale M68HC11 line. An M68HC11 MCU is an 8-bit CISC microcontroller that combines an enhanced central processing unit with on-chip peripherals such as timers, serial communications interfaces, and analog-to-digital converters. As a ROMless derivative, the F1 variant is designed for systems that require external program memory and full bus expansion, placing it in the broader hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> M68HC11 family -> HC11F1 sub-family -> semiconductor IC. Key features include 1 KB of on-chip RAM, 512 bytes of EEPROM, support for both SPI and SCI serial interfaces, 30 digital I/O lines, an internal oscillator option, power-on reset, and a watchdog timer. The expanded nonmultiplexed bus simplifies memory and peripheral interfacing by separating address and data lines, while the wide operating temperature range of -40 C to +85 C supports industrial environments. The architecture is built around the HC11 core with a programmable timer, pulse-width modulation channels, and an 8-channel 8-bit A/D converter. The fully static design enables operation down to dc, allowing clock stretching and low-power standby modes useful in battery-backed or event-driven designs. Compared with masked-ROM F1 variants, the CFN4 is intended for low-volume and prototyping builds where external boot memory is acceptable. Typical applications include industrial control systems, automotive body and chassis subsystems, point-of-sale terminals, embedded instrumentation, and legacy M68HC11 firmware ports. Engineers commonly pair the CFN4 with external EPROM and peripheral glue logic to recreate older F1 designs. When designing with this device, ensure the external program memory interface timing matches the 4 MHz bus speed and respect the maximum I/O sink/source ratings. Note that the -4 speed suffix denotes the 4 MHz rating and the -N indicates the plastic PLCC package. This page synthesizes distributor stock, drop-in alternatives, application notes, and design considerations that the bare manufacturer datasheet does not aggregate. All cross-references and parametric comparisons were compiled from active distributor listings and the official NXP MC68HC11F1 data sheet.

Cotação Contato