Microcontroladores

Produtos (20.000+)

MC9S08GT16AMFDE - 8-bit S08 MCU, 16KB Flash, 40MHz, QFN-48 | NXP
MC9S08GT16AMFDE

MC9S08GT16AMFDE - 8-bit S08 MCU, 16KB Flash, 40MHz, QFN-48 | NXP

The NXP Semiconductors MC9S08GT16AMFDE is an 8-bit S08 (HCS08) general-purpose microcontroller IC running at up to 40 MHz with 16 KB (16K x 8) of Flash program memory and 2 KB of RAM, housed in a 48-pin VFQFN exposed-pad (7x7 mm) package. An 8-bit microcontroller is an integrated circuit that contains a processor core, memory, and peripherals on a single chip, executing one byte of data per instruction cycle. Within the power-management and embedded-control hierarchy, the MC9S08GT16A belongs to the MC9S08GT family of cost-effective, high-performance S08 general-purpose MCUs from NXP (formerly Freescale Semiconductor), positioned above smaller 8K devices and below larger 32K/60K family members. Key features include the 40 MHz HCS08 CPU with HC08 instruction set compatibility plus an added BGND instruction, support for up to 32 interrupt/reset sources, software-selectable pullups on ports when used as inputs, and a wide 1.8V to 3.6V single-supply operating range. The 16 KB Flash supports in-application reprogramming, and the 48-QFN-EP package with exposed pad provides good thermal and grounding performance in a compact 7x7 mm footprint. Architecturally, the S08 core is an enhanced derivative of the HC08 core, offering backward code compatibility while improving interrupt handling and adding debug instructions. The device integrates Flash, RAM, and standard S08 peripheral modules on a single die, reducing system BOM count for cost-sensitive embedded designs. The automotive temperature grade (per Partstack package data: HVQCCN square no-lead package) extends use into harsher environments. Typical applications include automotive body electronics and accessories, industrial control panels, consumer appliance control, low-cost motor control, and system monitoring where an 8-bit MCU with modest Flash (16 KB) is sufficient. When designing with this device, plan the supply network for the 1.8V to 3.6V range and verify Flash density against code growth, since 16 KB is fixed per orderable part number. The exposed pad should be soldered to a ground pour for best electrical and thermal performance. This page synthesizes distributor stock data, cross-reference comparisons, drop-in alternatives, and practical design guidance not found in any single datasheet or distributor listing.

Cotação Contato
MC9S08GT16CFBE - 8-Bit S08 MCU, 16KB Flash, 40MHz | NXP
MC9S08GT16CFBE

MC9S08GT16CFBE - 8-Bit S08 MCU, 16KB Flash, 40MHz | NXP

The NXP (Freescale Semiconductor) MC9S08GT16CFBE is an 8-bit S08 (HCS08) general-purpose microcontroller with a CISC core running at up to 40 MHz bus clock, 16 KB of Flash program memory, 2 KB of on-chip RAM, and a 10-bit ADC, housed in a 44-pin QFP (10x10 mm) surface-mount package. The BE suffix denotes the industrial temperature range and the C suffix denotes the 44-pin QFP package. An 8-bit microcontroller integrates a processor core, memory, and peripherals on a single chip, forming the lowest tier of the embedded MCU hierarchy (MCU -> embedded processor -> system-on-chip). The S08 family succeeded the popular 68HC08 architecture, offering enhanced debugging (background debug mode), lower power modes, and richer peripherals while preserving CISC code compatibility. MCUs of this class typically run at CPU frequencies of tens of MHz and serve cost-sensitive embedded control tasks. Key features of the MC9S08GT16CFBE include 16 KB (16K x 8) of in-circuit programmable Flash, 2 KB of RAM, I2C, SCI (UART), and SPI serial interfaces, an 8-channel 10-bit analog-to-digital converter, and on-chip system protection functions including low-voltage detection (LVD), power-on reset (POR), a computer operating properly (COP) watchdog, and PWM capability. The part operates from a 2.5 V or 3.3 V supply per distributor specifications. Architecturally, the enhanced S08 core executes the HC08 instruction set with a background debug module (BDM) allowing non-intrusive flash programming and real-time debugging over a single-wire interface. Multiple low-power stop and wait modes make it suitable for battery-conscious designs, and the flash memory supports in-application reprogramming for field updates. Typical applications include industrial control and automation, consumer appliance control panels, HVAC system controllers, battery chargers, and low-cost human-machine interfaces where 16 KB of code space and rich serial connectivity are sufficient. When designing with this MCU, note that it is a legacy device: NXP has discontinued it and production today is handled by Rochester Electronics under authorized continuity, so new designs should evaluate the MC9S08GT16A successor family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S08GT16CFD - 8-Bit 40MHz 16KB Flash MCU | NXP
MC9S08GT16CFD

MC9S08GT16CFD - 8-Bit 40MHz 16KB Flash MCU | NXP

The NXP Semiconductors MC9S08GT16CFD is an 8-bit S08 microcontroller operating at up to 40 MHz, with 16 KB of flash memory, in a 48-QFN-EP 7 x 7 mm package. The verified distributor record identifies the device as an S08 microcontroller with 16K x 8 flash organization and an exposed-pad package. It is suited to embedded control, industrial automation, consumer equipment, and connected products requiring real-time control with integrated flash-based firmware storage. An S08 microcontroller is an 8-bit embedded microcontroller in the broader hierarchy of embedded processors, microcontrollers, and semiconductors. It executes firmware from flash memory and provides general-purpose I/O, interrupt handling, timers, communications interfaces, and analog or timing resources depending on the device variant. The MC9S08GT16CFD family is intended for designs that need deterministic embedded control rather than a high-level application processor. The principal verified characteristics are an 8-bit CPU, 40 MHz maximum operating frequency, and 16 KB flash memory. The package is a 48-terminal no-lead square QFN with an exposed pad, identified by package code HVQCCN in distributor data. The S08 instruction set includes the BGND instruction according to the retrieved technical description, and the device supports up to 32 interrupt or reset sources. Software-selectable port pullups and internal pullups on RESET and IRQ are also identified as design features. The 40 MHz clock rate provides useful processing headroom for control loops, protocol servicing, and supervisory logic, while the 16 KB flash capacity supports compact firmware. The exposed-pad package improves board-level heat spreading when used with a properly designed thermal pad and copper area, but final thermal performance depends on PCB construction, copper area, airflow, and the actual operating condition. Typical application domains include industrial control modules, motor or actuator supervisory circuits, building and access-control equipment, consumer appliances, instrumentation, and low-cost embedded nodes. Selection should begin with the verified 40 MHz performance, 16 KB flash requirement, S08 software compatibility, and the exact 48-QFN-EP footprint. Place the decoupling network close to the supply pins and preserve the exposed-pad land pattern and thermal-via layout specified by the manufacturer package documentation. Confirm pin functions, voltage limits, peripheral availability, programming requirements, and lifecycle status against the current NXP datasheet before releasing a production design. This page consolidates verified distributor specifications, package information, sourcing references, and engineering guidance for engineers comparing the MC9S08GT16CFD with other embedded-control solutions. It does not infer undocumented electrical limits or claim a drop-in replacement unless the manufacturer footprint and pinout have been independently confirmed.

Cotação Contato
MC9S08GT16CFDR2 - 20MHz 8-Bit Flash MCU | NXP Semiconductors
MC9S08GT16CFDR2

MC9S08GT16CFDR2 - 20MHz 8-Bit Flash MCU | NXP Semiconductors

The NXP Semiconductors MC9S08GT16CFDR2 is an 8-bit HCMOS flash microcontroller operating at 20 MHz in a 48-terminal no-lead square QFN package with an exposed pad. The verified source data identifies an industrial-grade embedded processor and controller, while detailed flash, SRAM, peripheral, voltage, and timer specifications were not supplied. The MCU belongs to the MC9S08GT general-purpose S08 family and is designed for embedded control designs requiring an 8-bit processor, integrated nonvolatile program memory, and a compact surface-mount footprint. A microcontroller is an integrated circuit that combines a processor core, memory, and peripheral functions into one device used to read inputs, execute control logic, and drive outputs. MC9S08GT16CFDR2 is specifically positioned within the S08 family, whose enhanced 8-bit architecture targets cost-effective, high-performance general-purpose embedded control. Its hierarchy is microcontroller → 8-bit microcontroller → S08 microcontroller → MC9S08GT family. The strongest verified specifications are a 20 MHz operating frequency, HCMOS process designation, 8-bit architecture, flash memory, industrial temperature grade, and 48 no-lead square package terminals. The Partstack package code is HVQCCN. Flash integration supports firmware retention in an embedded design, although the exact flash capacity and programming specifications were not provided and must be confirmed from the MC9S08GT16 manufacturer datasheet before firmware-bank or boot-loader planning. The supplied family result identifies MC9S08GT16A variants as cost-effective, high-performance S08 general-purpose 8-bit microcontrollers using the enhanced S08 core. It also states that the GT family offers multiple modules, memory sizes, and package choices. These family characteristics make the device applicable to industrial controllers, communication modules, human-interface systems, and compact embedded products, subject to verification of the exact peripherals and interfaces in the MC9S08GT16 documentation. A critical design consideration is exposed-pad thermal management. Because the package includes an exposed pad, the PCB thermal design must provide adequate copper and via connectivity, while power and ground pins must follow the exact manufacturer land pattern and pinout. Do not assume the exposed pad is interchangeable with a normal signal pin; consult the manufacturer pin assignment and recommended footprint before layout release. This page consolidates the verified distributor descriptions, package identity, family positioning, sourcing links, and replacement-evaluation constraints into one engineering reference. It also distinguishes confirmed facts from missing data so engineers can identify the MC9S08GT16CFDR2 quickly and proceed to authoritative pinout, memory, electrical, lifecycle, and pricing validation before design commitment.

Cotação Contato
MC9S08GT32ACBE - 8-Bit S08 MCU, 32KB Flash, 40MHz | NXP
MC9S08GT32ACBE

MC9S08GT32ACBE - 8-Bit S08 MCU, 32KB Flash, 40MHz | NXP

The NXP MC9S08GT32ACBE is an 8-bit microcontroller from the S08 family featuring a 40 MHz enhanced S08 core, 32 KB of on-chip Flash, 4 KB of RAM and a 42-pin PDIP package targeted at cost-sensitive general-purpose embedded designs. The 'GT' suffix denotes the general-purpose tier of the MC9S08 family and integrates rich on-chip peripherals including timers, ADC, and serial communication interfaces suitable for consumer, industrial and appliance control. An 8-bit microcontroller (MCU) is a microprocessor core with an 8-bit data path, internal program memory (Flash/ROM), data memory (RAM), and integrated peripherals such as timers, analog-to-digital converters, and communication ports. Within the broader semiconductor taxonomy, an MCU is a sub-class of microprocessors belonging to the embedded processor hierarchy, falling under Integrated Circuits > Microcontrollers. The S08 core is an enhanced version of the original HC08 architecture, offering improved instruction set efficiency and lower power consumption than legacy 5V designs. Key features of the MC9S08GT32ACBE include 32 KB Flash program memory, 4 KB RAM, an internal bus speed up to 40 MHz (20 MHz bus), an integrated multi-channel ADC, multiple timer modules (TPM), and serial interfaces (SCI/SPI/IIC). The 42-pin PDIP package supports through-hole assembly for prototyping, hobby projects, legacy board replacements and industrial control panels where a socketed or hand-soldered solution is preferred over surface mount. The device is built on a 0.25 µm CMOS process with a wide operating voltage range of 2.7V to 5.5V, supporting both 3.3V and 5V system designs. Its low-power modes (wait, stop3) make it suitable for battery-powered and energy-conscious applications. Compared to legacy HC08 parts, the S08 core adds BGND instruction for debug access and improved indexing modes, while preserving binary compatibility with most HC08 instruction patterns. Typical applications include appliance controls (washing machines, microwave ovens, HVAC), industrial sensor interfaces, low-end consumer electronics, smart metering peripherals, motor control BLDC driver boards, and educational/development kits. The 32 KB Flash is sufficient for state-machine firmware, small RTOS kernels, or fixed-function control loops. Design considerations: place decoupling capacitors (100 nF plus 4.7 µF bulk) close to VDD/VSS pins, use the integrated voltage regulator with proper bulk capacitance, and respect the absolute maximum ratings of -0.3V to +6V on digital pins. The 42-pin PDIP footprint requires through-hole plating or socketed headers. This page synthesizes distributor pricing, drop-in NXP same-family alternatives (including the 44-QFP package variant) and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
MC9S08GT32ACFBE - 8-bit S08 MCU 40MHz 32KB Flash | NXP
MC9S08GT32ACFBE

MC9S08GT32ACFBE - 8-bit S08 MCU 40MHz 32KB Flash | NXP

The NXP Semiconductors MC9S08GT32ACFBE is an 8-bit HCS08 general-purpose microcontroller with a 40 MHz CPU, 32 KB (32K x 8) Flash memory, 4 KB RAM, and 2.5V/3.3V operation, housed in a 44-pin PQFP (44-QFP, 10x10 mm) surface-mount package supplied in trays. An 8-bit microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, serial communication interfaces, and analog-to-digital converters. Within the power-management hierarchy of embedded systems, a general-purpose MCU sits at the control layer, executing application firmware to manage sensors, actuators, and communication in a product. The MC9S08GT family belongs to NXP's (formerly Freescale) S08 architecture, an enhanced successor to the HC08 instruction set. Key features of the MC9S08GT32ACFBE include the enhanced HCS08 CPU core with the added BGND instruction, support for up to 32 interrupt/reset sources, software-selectable pull-ups on ports when used as inputs, and a supply voltage range of 1.8 V to 3.6 V per parametric listings. The CISC core executes HC08-compatible code, easing migration from legacy HC08 designs. On-chip Flash allows in-circuit reprogramming, and the 4 KB RAM provides working memory for protocol stacks and control loops. Technically, the device integrates typical S08GT modules such as the serial peripheral interface (SPI), serial communications interface (SCI), IIC bus, and timer/PWM modules, along with a 10-bit ADC, enabling single-chip designs that previously required external components. The 40 MHz internal bus-clock capability supports computationally demanding 8-bit tasks while retaining the low power modes expected of the family. Typical applications include industrial control panels, consumer appliance interfaces, motor control helpers, battery chargers, and legacy HC08 upgrade paths where code compatibility and cost are priorities. A key design consideration: this part is listed by NXP as End of Life, so new designs should evaluate family alternatives or plan last-time-buy inventory; existing designs should verify PCN notices from NXP. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference. Pricing references are as of 2026-10-18.

Cotação Contato
MC9S08GT32ACFBER - 8-bit S08 MCU 32KB Flash 40MHz | NXP
MC9S08GT32ACFBER

MC9S08GT32ACFBER - 8-bit S08 MCU 32KB Flash 40MHz | NXP

The NXP Semiconductors MC9S08GT32ACFBER is an 8-bit general-purpose microcontroller based on the enhanced HCS08 core, delivering 32 KB of flash program memory, 4 KB of RAM, and a maximum bus operation of 40 MHz, housed in a 44-pin QFP (S-PQFP-G44) gull-wing surface-mount package. An 8-bit microcontroller is an integrated circuit that combines a processor core, memory, and peripherals such as timers, ADC, and serial interfaces on a single chip, forming the lowest tier of the microcontroller hierarchy (MCU -> embedded processor -> semiconductor). The S08 family descends from the HC08 architecture, retaining CISC instruction-set compatibility while adding the BGND background-debug instruction, which simplifies in-circuit debugging through a single-wire background debug interface. Key features of the MC9S08GT32ACFBER include up to 32 interrupt/reset sources, software-selectable internal pullups on port pins when configured as inputs, integrated PWM channels, an 8-channel 10-bit ADC, and serial communication interfaces including SCI (UART), SPI, and IIC. The industrial temperature grade supports demanding factory and automotive-adjacent environments. Architecturally, the device uses a CMOS process with low-power wait and stop modes, making it suitable for battery-conscious designs. Flash memory supports in-circuit programming and erase, enabling field firmware updates without socketed parts. The internal oscillator option reduces external component count and bill-of-materials cost. Typical applications include industrial control systems, consumer appliances, motor control and lighting control, and legacy HC08 design migrations where 32 KB of flash and rich timer resources are required. Design considerations: the supply voltage range of 1.8 V to 3.6 V must be respected, and the 44-QFP footprint requires attention to decoupling capacitor placement on all VDD/VSS pairs. This page synthesizes distributor pricing, drop-in alternatives within the MC9S08GT family, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-10-18.

Cotação Contato
MC9S08GT32ACFDE - 40MHz 32KB 8-Bit MCU | NXP | Embedded
MC9S08GT32ACFDE

MC9S08GT32ACFDE - 40MHz 32KB 8-Bit MCU | NXP | Embedded

The NXP Semiconductors MC9S08GT32ACFDE is an 8-bit S08 general-purpose microcontroller operating at up to 40 MHz, with 32 KB of flash memory and 4 KB of RAM, housed in a 48-pin QFN exposed-pad package. Its operating supply range is 1.8 V to 3.6 V, and it provides 34 I/O ports for compact embedded-control designs. An S08 microcontroller is an 8-bit embedded controller combining a processor core, program memory, data memory, I/O, interrupts, timers, and communication peripherals on one semiconductor die. It belongs to the MCU hierarchy: microcontroller -> embedded processor -> semiconductor. The enhanced S08 instruction set supports efficient control-oriented firmware, while on-chip flash permits field-updatable application code without an external memory device. Key verified features include a 40 MHz maximum clock, 32 KB of flash, 4 KB of RAM, 34 I/O ports, and support for up to 32 interrupt or reset sources. The 1.8 V to 3.6 V supply range accommodates low-voltage digital systems, while software-selectable input pullups support robust digital interfaces. The 48-QFN-EP package supports surface-mount assembly and uses an exposed pad for board-level thermal management. The MCU combines conventional parallel GPIO with embedded serial and timing resources, making it suitable for control boards, human-interface systems, communication modules, and compact industrial products. Exact peripheral assignments, interrupt vectors, electrical limits, and timer details should be confirmed in the manufacturer data sheet before schematic or firmware release. Typical uses include motor and actuator sequencing, panel controls, sensor aggregation, keypad interfaces, programmable logic controllers, and communication equipment. At 40 MHz, the device offers useful processing headroom for interrupt servicing, protocol handling, and simultaneous control tasks without requiring a higher-bit architecture. PCB design should route the exposed thermal pad to a solderable copper plane and follow the manufacturer's land pattern, decoupling, and assembly guidance. Confirm the exact exposed-pad dimensions and pin mapping from the official package drawing; those details were not included in the supplied search extracts. This page consolidates NXP lifecycle information, distributor specifications, available sourcing links, and drop-in replacement research. It distinguishes verified facts from unverified package, pin-level, pricing, and compliance details so engineers can make an informed sourcing decision.

Cotação Contato
MC9S08GT32ACFDER - 8-Bit S08 MCU 32KB Flash 40MHz | NXP
MC9S08GT32ACFDER

MC9S08GT32ACFDER - 8-Bit S08 MCU 32KB Flash 40MHz | NXP

The NXP MC9S08GT32ACFDER is an 8-bit S08 family microcontroller integrating 32KB of Flash program memory and 2KB of RAM, executing at up to 40MHz, and packaged in a 48-pin QFN-EP (7x7 mm). The die targets cost-sensitive embedded applications that demand deterministic performance, low power, and integrated peripherals in a small surface-mount footprint. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. The HCS08/S08 core from NXP is a CISC 8-bit architecture that has powered automotive body electronics, white goods, and industrial sensor nodes for over a decade. Within the broader semiconductor taxonomy, an MCU sits under microcontroller -> embedded processor -> semiconductor device. The GT-series MCUs specifically target general-purpose 8-bit designs where footprint, BOM count, and peripheral integration dominate the design trade-off. Key features include 32KB (32K x 8) of embedded Flash with in-application programmability, 2KB of RAM, 39 general-purpose I/O lines, and an internal bus clock of up to 40MHz derived from the on-chip FLL. Integrated peripherals include PWM channels, an LVD (low-voltage detect) and POR (power-on reset), a watchdog timer (WDT), and communication interfaces (I2C, SCI, SPI). The 48-QFN-EP package exposes a thermal pad that reduces junction-to-ambient thermal resistance, improving continuous high-current I/O operation. Operating voltage spans 2.7V to 5.5V with industrial temperature grade support. The architecture relies on the S08 CISC core with a single 16-bit index register, HX, plus a 16-bit stack pointer. The Flash controller supports byte-erase and security features; the on-chip clock module supports an internal reference and external crystal, enabling flexible clock-tree design. The 8-bit datapath, 40MHz core clock, and single-cycle bus at half the bus rate give deterministic instruction timing suitable for hard-real-time loops in motor control, lighting, and sensor conditioning. Typical applications include HVAC control boards, appliance user-interface panels, automotive body controllers, battery-powered sensor transmitters, low-end BLDC motor drivers, and LED lighting controllers. Design considerations include providing a 0.1uF decoupling capacitor on each VDD pin, exposing the thermal pad to a continuous copper pour on the top layer for heat spreading, and reserving the reset pin for an external supervisor or RC network when battery-supplied cold-start behavior matters.

Cotação Contato
MC9S08GT32CB - 8-Bit 40MHz 32KB Flash MCU | NXP
MC9S08GT32CB

MC9S08GT32CB - 8-Bit 40MHz 32KB Flash MCU | NXP

The NXP Semiconductors MC9S08GT32CB is an 8-bit S08 general-purpose microcontroller operating at up to 40 MHz, with 32 KB of program Flash, 2 KB of RAM, and 34 general-purpose I/O pins in a 42-pin PDIP package. Its combination of an HCS08-compatible CPU core, integrated communication peripherals, and through-hole package makes it suitable for cost-sensitive embedded control, industrial equipment, and legacy system maintenance. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, I/O, and peripherals into one embedded-control component. The S08 family is an 8-bit MCU platform designed for control-oriented products, where deterministic peripherals, modest memory requirements, and simple firmware execution are more important than processor performance for desktop-class workloads. MC9S08GT32CB belongs to the S08 microcontroller hierarchy and provides a compact platform for embedded logic, sensing, communications, and actuator control. Key verified features include a 40 MHz clock, 32 KB Flash program memory, 2 KB of RAM, 34 I/O pins, and support for up to 32 interrupt or reset sources. The device also includes I2C, SCI, and SPI connectivity, along with PWM, watchdog-timer, low-voltage-detection, and power-on-reset peripherals. Software-selectable pullups are available on ports used as inputs, while the RESET and IRQ pins include internal pullups. The S08 CPU uses the HC08 instruction set with the BGND instruction, supporting the MCU's embedded-control architecture. Flash memory permits firmware updates and programmed production quantities without EEPROM, while the available RAM supports working variables, stack operations, communication buffers, and control-loop state. The 42-pin PDIP package provides through-hole assembly compatibility for industrial and legacy PCB designs. Typical uses include motor and actuator controllers, industrial interface modules, instrumentation, communication hubs, sensor nodes, and legacy industrial control systems. When designing around this device, verify the exact pinout, voltage limits, peripheral multiplexing, and timing requirements from the manufacturer datasheet. The CB suffix and package configuration should be confirmed during procurement rather than inferred from other S08 variants.

Cotação Contato
MC9S08GT32CFD - 8-Bit 40MHz S08 MCU, 32KB Flash | NXP
MC9S08GT32CFD

MC9S08GT32CFD - 8-Bit 40MHz S08 MCU, 32KB Flash | NXP

The NXP MC9S08GT32CFD is a member of the Freescale/NXP S08 family of 8-bit microcontrollers. It integrates a 40 MHz HCS08 CPU core with the HC08 instruction set (plus the BGND instruction for background debug mode), 32 KB of on-chip Flash program memory, 2 KB of SRAM, and 39 general-purpose I/O pins in a 48-pin QFN-EP (7 mm x 7 mm) package with an exposed thermal pad. In the system hierarchy, this part is an 8-bit microcontroller (MCU) belonging to the larger category of embedded microcontrollers, which in turn falls under the broader family of microprocessors and microcontrollers, then integrated circuits, and ultimately semiconductors. The "S08" prefix denotes the HCS08 CPU core, a successor to the long-standing HC08 core, offering improved instruction efficiency, better debug support (Background Debug Mode via the BKGD pin), and lower power consumption while preserving the HC08 instruction set for code compatibility. Key features include 32 KB of Flash memory, 2 KB of RAM, integrated peripherals such as PWM, an analog-to-digital converter (ADC), a Low-Voltage Detect (LVD), Power-On Reset (POR), and a Watchdog Timer (WDT). Communication interfaces include one SPI, one I2C, and one SCI (UART) module. The device supports up to 32 interrupt/reset sources and provides software-selectable pullups on port pins when configured as inputs, plus an internal pullup on the RESET and IRQ pins to reduce external component count. The HCS08 core architecture uses a 16-bit instruction set inherited from the HC08 with uprated internal datapath widths, enabling single-cycle execution of most instructions and deterministic interrupt response. The integrated Flash supports in-application reprogramming via the standard NXP BDM (Background Debug Mode) interface and through software routines. Typical applications include automotive body electronics, industrial control, home appliances, sensor interfaces, motor control (using the PWM and ADC), and general-purpose embedded control where a low-cost, low-power 8-bit MCU is appropriate. The wide operating voltage range of 2.5 V to 3.3 V supports 3 V system designs. When designing with this device, ensure that firmware is written using HC08/S08 instructions and the CodeWarrior Development Studio toolchain. The exposed thermal pad on the QFN-EP package must be soldered to the PCB ground plane for proper thermal dissipation and electrical performance; floating the pad can cause erratic behavior.

Cotação Contato
MC9S08GT60ACBE - 8-Bit 40MHz S08 MCU, 60KB Flash | NXP
MC9S08GT60ACBE

MC9S08GT60ACBE - 8-Bit 40MHz S08 MCU, 60KB Flash | NXP

The NXP MC9S08GT60ACBE is an 8-bit microcontroller from the S08 family (S08GT series) featuring a 40 MHz HCS08 CPU core, 60 KB of flash program memory, and a 42-pin PDIP package. According to the verified NXP distributor listings, the device integrates SCI, SPI, and I2C communication interfaces for automotive and industrial embedded designs, with an operating temperature range of -40°C to +85°C. Background context: An 8-bit microcontroller (MCU) is a single-chip computer built around a CPU with an 8-bit data path. The S08 family represents NXP/Freescale's enhanced HC08-architecture line; the MC9S08GT60 sits inside the broader S08GT sub-family of low-cost, high-performance general-purpose 8-bit microcontrollers. Within the taxonomy, this places the part as: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor -> integrated circuit. The HCS08 core is binary-compatible with the legacy HC08 instruction set and adds the BGND instruction for background debug. Key features include 60 KB (60K x 8) of flash memory for code storage, 4 KB of RAM for data, and a maximum CPU clock frequency of 40 MHz. The device is supplied in a 42-pin SPDIP (Plastic DIP) through-hole package, simplifying prototyping and breadboarding. The supply voltage range spans 2.5 V to 3.3 V per the verified FindIC listing, suitable for battery-backed and low-power industrial nodes. On the architecture side, the HCS08 core executes most instructions in 1-2 bus cycles and provides up to 32 interrupt/reset sources with vectored interrupt handling. Software-configurable pull-ups on port pins used as inputs remove the need for external resistor networks. Communication peripherals include one SCI (UART), one SPI, and one I2C module, sufficient for sensor hubs, HMI keypads, and simple motor-control front ends. Typical applications span automotive body electronics, industrial control modules, consumer appliance controllers, and low-end sensor nodes where the 60 KB flash and 4 KB RAM comfortably host state-machine firmware. The wide -40°C to +85°C industrial temperature range also enables outdoor and factory-floor deployments. When designing with this MCU, allocate decoupling capacitance of 0.1 µF plus 4.7 µF bulk near the VDD/VSS pins, and reserve the BGND pin for in-circuit debugging. Designers should verify pinout against the specific S08GT series datasheet because the 42-pin SPDIP is shared with several siblings at different memory densities. This page synthesizes distributor pricing, verified parametric data, application guidance, and design notes that complement the manufacturer datasheet for engineers evaluating the MC9S08GT60ACBE.

Cotação Contato
MC9S08GT60ACFBE - 8-Bit 40MHz 60KB Flash S08 MCU | NXP
MC9S08GT60ACFBE

MC9S08GT60ACFBE - 8-Bit 40MHz 60KB Flash S08 MCU | NXP

The NXP MC9S08GT60ACFBE is a cost-effective 8-bit general-purpose microcontroller from the S08GT family, featuring an enhanced HCS08 CPU core running up to 40 MHz (20 MHz bus), with 60 KB of on-chip Flash, 4 KB of RAM, and 34 general-purpose I/O pins, all housed in a 44-pin QFP (10x10 mm) package. The device integrates an 8-channel 10-bit ADC, SCI/SPI/I2C communication peripherals, and software-selectable port pull-ups, making it suitable for automotive and industrial embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. Within the broader taxonomy, the S08 family is a CISC 8-bit architecture positioned under the Freescale/NXP HCS08 lineage of low-cost, high-performance general-purpose microcontrollers, sitting alongside 16-bit S12 and 32-bit Kinetis families in NXP's automotive-grade portfolio. The GT sub-family emphasizes integration of Flash, RAM, ADC, and serial communication channels at low cost for body and chassis electronics. Key features include 60 KB (60K x 8) Flash program memory, 4 KB SRAM, a 40 MHz maximum CPU frequency, an 8-channel 10-bit ADC, multiple communication interfaces (one SCI, one SPI, one I2C), and a -40 C to +85 C industrial operating range. The 44-QFP package offers a manageable footprint with 34 user I/O lines, ample for keypad scanning, LED drive, sensor aggregation, and discrete control loops. Supply voltage spans 1.8 V to 3.6 V, with low-power wait and stop modes for battery-friendly designs. The HCS08 core uses a 16-bit stack-pointer-indexed instruction set with a BGND (background debug) instruction for non-intrusive in-circuit debugging. Up to 32 interrupt sources support real-time response, and the integrated COP watchdog, LVI (low-voltage detect), and clock monitoring provide robust fault recovery. The internal clock generator with FLL supports an external crystal or resonator across common communication baud-rate frequencies. Typical applications include HVAC control panels, appliance user interfaces, automotive body controllers, security and alarm keypads, and small industrial sensor hubs. The 40 MHz CPU and 60 KB Flash comfortably fit state-machine control plus small RTOS kernels for sensor fusion. The 8-channel ADC supports multi-zone temperature or pressure monitoring, and the SCI/SPI/I2C trio connects easily to motor pre-drivers, EEPROM, or external displays. When designing with this part, budget Flash for a small bootloader if field-upgrade is required, and reserve a hardware timer for software timing precision. Place a 100 nF decoupling cap close to each VDD pin and follow NXP's four-layer or two-layer reference layout recommendations in the datasheet for EMI compliance. The 44-QFP package allows hand-rework and optical inspection on prototype boards. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance that complements the manufacturer datasheet, helping engineers compare MC9S08GT60ACFBE to MC9S08GT32, MC9S08PT16, and MC9S08PA16 variants in the same S08 footprint.

Cotação Contato
MC9S08GT60ACFBER - 8-Bit 40MHz 60KB Flash S08 MCU | NXP (Tape & Reel)
MC9S08GT60ACFBER

MC9S08GT60ACFBER - 8-Bit 40MHz 60KB Flash S08 MCU | NXP (Tape & Reel)

The NXP MC9S08GT60ACFBER is a cost-effective 8-bit general-purpose microcontroller from the S08GT family, featuring an enhanced HCS08 CPU core running up to 40 MHz (20 MHz bus), with 60 KB of on-chip Flash, 4 KB of RAM, and 34 general-purpose I/O pins, all housed in a 44-pin QFP (10x10 mm) package. The device integrates an 8-channel 10-bit ADC, SCI/SPI/I2C communication peripherals, and software-selectable port pull-ups, making it suitable for automotive and industrial embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. Within the broader taxonomy, the S08 family is a CISC 8-bit architecture positioned under the Freescale/NXP HCS08 lineage of low-cost, high-performance general-purpose microcontrollers, sitting alongside 16-bit S12 and 32-bit Kinetis families in NXP's automotive-grade portfolio. The GT sub-family emphasizes integration of Flash, RAM, ADC, and serial communication channels at low cost for body and chassis electronics. Key features include 60 KB (60K x 8) Flash program memory, 4 KB SRAM, a 40 MHz maximum CPU frequency, an 8-channel 10-bit ADC, multiple communication interfaces (one SCI, one SPI, one I2C), and a -40 C to +85 C industrial operating range. The 44-QFP package offers a manageable footprint with 34 user I/O lines, ample for keypad scanning, LED drive, sensor aggregation, and discrete control loops. Supply voltage spans 1.8 V to 3.6 V, with low-power wait and stop modes for battery-friendly designs. The HCS08 core uses a 16-bit stack-pointer-indexed instruction set with a BGND (background debug) instruction for non-intrusive in-circuit debugging. Up to 32 interrupt sources support real-time response, and the integrated COP watchdog, LVI (low-voltage detect), and clock monitoring provide robust fault recovery. The internal clock generator with FLL supports an external crystal or resonator across common communication baud-rate frequencies. Typical applications include HVAC control panels, appliance user interfaces, automotive body controllers, security and alarm keypads, and small industrial sensor hubs. The 40 MHz CPU and 60 KB Flash comfortably fit state-machine control plus small RTOS kernels for sensor fusion. The 8-channel ADC supports multi-zone temperature or pressure monitoring, and the SCI/SPI/I2C trio connects easily to motor pre-drivers, EEPROM, or external displays. When designing with this part, budget Flash for a small bootloader if field-upgrade is required, and reserve a hardware timer for software timing precision. Place a 100 nF decoupling cap close to each VDD pin and follow NXP's four-layer or two-layer reference layout recommendations in the datasheet for EMI compliance. The 44-QFP package allows hand-rework and optical inspection on prototype boards. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance that complements the manufacturer datasheet, helping engineers compare MC9S08GT60ACFBER to MC9S08GT32, MC9S08PT16, and MC9S08PA16 variants in the same S08 footprint.

Cotação Contato
MC9S08GT60ACFDE - 8-Bit 40MHz MCU, 60KB Flash | NXP
MC9S08GT60ACFDE

MC9S08GT60ACFDE - 8-Bit 40MHz MCU, 60KB Flash | NXP

The NXP Semiconductors MC9S08GT60ACFDE is an 8-bit S08 general-purpose microcontroller with a 40 MHz processor, 60 KB of Flash memory, 4 KB of RAM, and a 48-pin QFN package with an exposed pad. It operates from 2.5 V to 3.3 V and is identified by NXP as NRND. A microcontroller is a compact embedded-computing device that integrates a CPU, nonvolatile program memory, volatile data memory, peripherals, and input/output interfaces on one semiconductor die. The S08 core uses a CISC instruction set and belongs to the HCS08 family of general-purpose 8-bit controllers. The MC9S08GT family targets cost-sensitive control systems requiring more processing and memory capacity than the smallest 8-bit devices. The verified device data identifies 60 KB of Flash program memory, 4 KB of RAM, an 8-bit architecture, and operation up to 40 MHz. A secondary distributor listing describes the package as a 7 x 7 mm 48-QFN with exposed pad, while the suffix indicates tray packaging. Flash memory supports in-system programming and allows firmware updates without replacing the MCU, while RAM supports working variables, stack operations, and peripheral data handling. The S08 platform integrates communication, timing, analog, and control peripherals, but the verified excerpt does not enumerate their channel counts or block configurations. Detailed peripheral requirements, pin functions, clock options, electrical limits, and thermal ratings should therefore be checked against the manufacturer data sheet before schematic capture or firmware development. Typical uses for this controller class include industrial monitoring, building and appliance controls, motor-control assistance, general embedded products, and compact consumer devices where an 8-bit architecture, 60 KB of program storage, and a QFN footprint are appropriate. Its exposed-pad package also requires deliberate PCB thermal-pad layout and manufacturing planning. The most important design consideration is lifecycle risk. Because NXP lists MC9S08GT60ACFDE as NRND, engineers should avoid committing it to new designs unless NXP confirms availability and lifecycle support. Existing production equipment may continue to use the part subject to supply-channel verification. This page consolidates distributor listings, package information, lifecycle status, sourcing data, and application guidance. It also distinguishes verified drop-in alternatives from related S08 devices that are not automatically pin-compatible, helping engineers assess replacement risk without changing the embedded architecture unnecessarily.

Cotação Contato
MC9S08GT60CFD - 8-bit 40MHz S08 MCU 60KB Flash QFN48 | NXP
MC9S08GT60CFD

MC9S08GT60CFD - 8-bit 40MHz S08 MCU 60KB Flash QFN48 | NXP

The NXP (formerly Freescale) MC9S08GT60CFD is an 8-bit HCS08 family microcontroller featuring a 40 MHz CPU core, 60 KB of Flash program memory, and 4 KB of RAM, housed in a 48-pin QFN (7x7 mm) package with an exposed thermal pad. It integrates up to 39 general-purpose I/O pins, multiple timers, ADC channels, and serial communication peripherals optimized for cost-sensitive embedded designs in industrial and consumer markets. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals onto one silicon die. The HCS08 core is a CISC architecture that uses the HC08 instruction set with the added BGND instruction for background debugging. The MC9S08GT60CFD belongs to the S08GT family, which is a sub-family of the broader S08 microcontroller line within NXP's automotive and industrial MCU portfolio, characterized by low power consumption, integrated peripherals, and small form factors ideal for space-constrained designs. Key features include 60 KB (60K x 8) of Flash memory, 4 KB of RAM, 39 general-purpose I/O lines, a 40 MHz maximum CPU frequency, support for up to 32 interrupt/reset sources, and software-selectable pullups on port pins when used as inputs. The internal pullup on the RESET and IRQ pin reduces external component count, lowering total BOM cost. Operating voltage is 2.5V or 3.3V, and the device includes an internal clock generator option. The MC9S08GT60CFD uses a Harvard architecture with separate program/data bus structures and an enhanced HCS08 core that delivers approximately 1.6x the performance of the original HC08 at the same clock frequency. The integrated peripherals include timer/PWM modules, ADC, SCI/SPI/I2C serial interfaces, and a watchdog timer, providing flexible connectivity and control for motor control, sensor interfaces, and human-machine interface applications. Typical applications include industrial control systems, white goods and home appliances, HVAC controls, security alarm systems, low-end consumer electronics, and sensor interface modules. The 48-QFN package with exposed pad enables compact PCB layouts with good thermal performance for applications requiring sustained computational load. When designing with this device, verify supply voltage requirements carefully - the 2.5V variant and 3.3V variant require different DC-DC regulator configurations. Decoupling capacitors should be placed as close as possible to the VDD pins, and the exposed pad must be soldered to a properly sized copper pour for thermal dissipation and electrical grounding. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing a consolidated reference for component selection engineers evaluating the MPDMC45S08GT60CFD for new designs or service replacements.

Cotação Contato
MC9S08GT60CFDE - 8-Bit 40MHz S08 MCU 60KB Flash | NXP
MC9S08GT60CFDE

MC9S08GT60CFDE - 8-Bit 40MHz S08 MCU 60KB Flash | NXP

The NXP Semiconductors MC9S08GT60CFDE is an 8-bit S08 CISC microcontroller with 60KB Flash program memory, 4KB RAM, and a 40MHz CPU core, housed in a 48-pin QFN-EP (HVQCCN, 7x7 mm) package. It operates from 2.5V/3.3V supply rails and offers 39 general-purpose I/O pins along with on-chip peripherals including PWM, LVD, POR, WDT, plus I2C, SCI, and SPI connectivity. The device targets industrial-grade embedded applications requiring deterministic 8-bit performance and small footprint integration. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and I/O peripherals on a single die. The S08 family uses a CISC (Complex Instruction Set Computer) architecture with the HCS08 core, succeeding the legacy HC08 family. Within the broader hierarchy, the S08 sits under: microcontroller -> embedded processor -> semiconductor device. Compared with 32-bit Cortex-M devices, S08 microcontrollers trade raw throughput for cost, deterministic interrupt latency, and ultra-low static power consumption, making them preferred in cost-sensitive, latency-bound, or battery-aware designs. Key features of the MC9S08GT60CFDE include 60KB on-chip Flash with in-application reprogrammability, 4KB SRAM, an internal clock generator with trimming, multiple timer/PWM modules, an analog-friendly package with an exposed thermal pad, and built-in safety peripherals (LVD, POR, COP watchdog). The 48-pin QFN-EP package exposes enough GPIO (39 pins) for typical human-interface, motor-control, and sensor-hub designs. Industrial-grade operating temperature range (-40C to +85C minimum) makes the part suitable for factory and automotive cabin environments. Technically, the HCS08 core executes most instructions in 1-2 bus cycles and supports a BDM (Background Debug Mode) interface for in-circuit programming and debug. The on-chip Flash uses an embedded EEPROM-style array with security lock bits to protect intellectual property. The MC9S08GT60CFDE differs from the GT32 variant in memory density (60KB Flash vs 32KB Flash) and from GT16 in scaling — all share the S08 core and the 48-QFN-EP package, enabling family-up firmware reuse. Typical applications include industrial motor control (small BLDC, stepper drivers), appliance and white-goods human-interface modules, automotive body-electronics accessories, sensor-hub front-ends, and consumer remote controls. The combination of PWM, SCI/SPI, and I2C makes it well-suited as a bridge controller between a sensor network and a higher-level host. In low-power designs, the on-chip peripherals allow the CPU to remain in wait/stop modes while timers and interrupts handle event-driven wakeups. When designing with the MC9S08GT60CFDE, ensure the exposed thermal pad is soldered to a copper pour of at least 1 square inch to keep junction temperature in spec for continuous high-CPU-load scenarios. Designers should also evaluate the GT32CFDE variant (32KB Flash) for cost reduction if application code is small enough — both share the same 48-QFN-EP footprint, easing PCB reuse. This page synthesizes parametric data from the NXP/Freescale datasheet family, distributor pricing as of 2026-10-18, and a drop-in alternatives matrix drawn from the NXP S08 family — content not aggregated in any single distributor or manufacturer page.

Cotação Contato
MC9S08GT8ACBE - 8-Bit S08 MCU 8KB Flash 40MHz 42-PDIP | NXP
MC9S08GT8ACBE

MC9S08GT8ACBE - 8-Bit S08 MCU 8KB Flash 40MHz 42-PDIP | NXP

The NXP MC9S08GT8ACBE is an 8-bit HCS08 microcontroller featuring 8KB of Flash program memory, 1KB of RAM, and a 40MHz enhanced S08 core, housed in a 42-pin SPDIP (Skinny Plastic DIP) through-hole package. It belongs to the cost-effective, high-performance MC9S08GT general-purpose MCU family and operates from a 2.5V/3.3V supply with an integrated ADC, PWM, and multiple serial interfaces. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one die, designed for embedded control tasks where cost and deterministic response dominate over raw throughput. The MC9S08GT8ACBE sits within the broader taxonomy: microcontroller -> embedded controller -> semiconductor IC. The HCS08 core retains backward compatibility with the legacy HC08 instruction set while adding the BGND instruction and improved interrupt handling, making it a natural upgrade path for legacy Freescale designs. Key features of the MC9S08GT8ACBE include an HCS08 core running up to 40MHz, 8KB of Flash, 1KB of on-chip RAM, 34 general-purpose I/O lines, and an integrated 8-channel 10-bit ADC. Communication peripherals include one SPI, one SCI (UART), and one I2C interface. System-level peripherals include Low-Voltage Detection (LVD), Power-On Reset (POR), Pulse-Width Modulation (PWM) modules, and a Watchdog Timer (WDT). Software-configurable pull-ups on input ports reduce BOM cost for keypad and switch-matrix interfaces. The S08 architecture uses a von Neumann memory map with up to 32 interrupt/reset sources, giving designers fine-grained control over timing-critical events. The BGND instruction enables background debug mode for in-circuit development using NXP's CodeWarrior or the open-source GCC toolchain with P&E or OSBDM debug probes. The integrated 10-bit ADC supports up to 8 channels, sufficient for sensor-reading applications such as battery monitoring or thermistor sampling. Typical applications include low-cost consumer appliances, white goods control boards, industrial sensor nodes, hobby/educational platforms, and legacy equipment retrofits. Its through-hole 42-PDIP package and 2.5V/3.3V dual-voltage operation make it especially attractive for breadboard prototyping and replacement of legacy HC08 designs. When designing with this device, ensure the supply voltage stays within the specified 2.7V-3.6V (3.3V nominal) range and provide adequate decoupling on VDD/VSS pairs. Unused I/O should be configured as outputs or inputs with the internal pull-up enabled to minimize quiescent current draw. This page synthesizes distributor pricing, drop-in alternatives from the S08GT family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S08GT8ACFCE - 40MHz 8KB Flash 8-bit MCU | NXP
MC9S08GT8ACFCE

MC9S08GT8ACFCE - 40MHz 8KB Flash 8-bit MCU | NXP

The NXP Semiconductors MC9S08GT8ACFCE is a general-purpose 8-bit S08GT microcontroller operating at up to 40 MHz, with 8 KB of Flash memory, 34 I/O ports, and a 32-lead no-lead package identified by the source data as HVQCCN in a 5 mm by 5 mm square format. Its supply-voltage range is 1.8 V to 3.6 V. The enhanced S08 core uses the HCS08 instruction set with an added BGND instruction and supports up to 32 interrupt and reset sources. An 8-bit microcontroller is a compact embedded-control device that combines a processor core, programmable Flash memory, digital I/O, interrupts, timers, and communication peripherals on one semiconductor package. Within the hierarchy of embedded processors, this device belongs to the 8-bit microcontroller class and the NXP S08 general-purpose product family. It is appropriate for cost-sensitive control systems where 8 KB of code storage and a 40 MHz clock are sufficient. Key verified features include an 8-bit CPU architecture, 40 MHz maximum clock, 8 KB Flash memory, 34 I/O ports, operation from 1.8 V to 3.6 V, and support for as many as 32 interrupt and reset sources. The source data also identifies software-selectable pullups on ports when those ports are used as inputs, reducing the need for some external input-conditioning components. The no-lead, 32-terminal package supports compact surface-mount assemblies. The S08GT architecture combines an enhanced S08 core with general-purpose resources rather than a highly specialized application processor. Its HCS08-compatible instruction set supports compact embedded control code, while the 40 MHz operating speed provides processing headroom for digital state machines, timing, and interface handling. Exact RAM capacity, timer organization, analog peripherals, pin names, and electrical timing limits must be confirmed in the official manufacturer documentation before schematic or firmware release. Typical uses include industrial control modules, appliance controllers, building-control endpoints, small motor-control logic, keypad interfaces, and sensor-conditioning systems. A 5 mm by 5 mm package is useful where board area is constrained, although exposed-pad thermal and assembly requirements still depend on the exact ordering code and package drawing. Firmware development should use the memory map, interrupt vectors, and pin definitions published for this exact suffix. When designing a board, begin with the official 32-terminal package drawing and preserve the required decoupling and exposed-pad land pattern. Confirm pin multiplexing before assigning functions because general-purpose ports may support selectable pullups and multiple peripheral roles. Programmers should also verify the supported clock, reset, programming, and operating-temperature details rather than extrapolating them from another S08GT member. This page combines the verified manufacturer and distributor facts with sourcing, lifecycle, compatibility, and design guidance. It also distinguishes verified characteristics from details that remain unavailable in the supplied search evidence, helping engineers make a responsible preliminary selection before downloading the complete NXP datasheet.

Cotação Contato
MC9S08GT8AMFBE - 8KB Flash S08 8-bit MCU, 40MHz QFP-44 | NXP
MC9S08GT8AMFBE

MC9S08GT8AMFBE - 8KB Flash S08 8-bit MCU, 40MHz QFP-44 | NXP

The NXP MC9S08GT8AMFBE is an 8-bit HCS08-core microcontroller with 8KB Flash, 1KB RAM and a 40 MHz CPU, housed in a 44-pin PQFP (10x10 mm) package. It is part of the cost-effective, high-performance S08GT general-purpose MCU family, offering low-power technology, multiple power-management modes, and software-selectable port pullups for embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and peripherals such as timers, ADC and communication interfaces. The MC9S08GT8AMFBE belongs to the 8-bit MCU hypernym hierarchy: microcontroller -> 8-bit microcontroller -> HCS08 family -> S08GT sub-family -> general-purpose low-power segment, and is commonly deployed where deterministic real-time behaviour, low quiescent draw and small code footprints are required. Key features include a 40 MHz enhanced S08 core with up to 32 interrupt/reset sources, 8KB on-chip Flash, 1KB RAM, 34 software-configurable I/O ports, an internal timer autowake-up from Stop 2/Stop 3 modes drawing typically only 300 nA additional current, and a 20 nA power-down mode. The supply voltage range is 1.8 V to 3.6 V, supporting single-cell Li-ion and 3.3 V regulated rails. The 44-pin QFP (10x10 mm) is a surface-mount plastic quad flat pack with gull-wing leads. The architecture uses a HC08-compatible instruction set with the added BGND instruction for background debug, making it compatible with NXP/Freescale CodeWarrior and P&E Multilink toolchains. Multiple power-management modes (Run, Wait, Stop 2, Stop 3) and fast wake-up times enable energy-efficient designs in battery-powered or energy-harvesting products. The S08GT family shares peripheral IP across members, simplifying code portability between MC9S08GT8A, MC9S08GT16A, MC9S08GT8 and MC9S08GT16 derivatives. Typical applications include automotive body electronics (LIN slaves, sensor conditioning, lighting controllers), white goods and appliance user panels, battery-backed instrumentation, and low-cost industrial control modules. The -40 to 125C operating range (Viyrian listing marks it automotive) suits underhood measurements and in-service industrial deployments. When designing with this part, ensure VDDA/VSSA decoupling is per datasheet, leave the BKGD/MS pin accessible for in-circuit debug, and verify Stop-mode wake-up source configuration before locking firmware. The S08GT family offers a low-risk migration path to larger Flash members (GT16) on the same QFP-44 footprint. This page synthesizes distributor pricing, same-package drop-in alternatives drawn from the S08GT family, and design notes not found in the manufacturer datasheet. Authoritative sources: NXP product page and the DigiKey listing for MC9S08GT8AMFBE.

Cotação Contato
MC9S08GT8AMFCE - HCS08 8-bit MCU, 8KB Flash, 40MHz, QFN-32 | NXP
MC9S08GT8AMFCE

MC9S08GT8AMFCE - HCS08 8-bit MCU, 8KB Flash, 40MHz, QFN-32 | NXP

The NXP MC9S08GT8AMFCE is a cost-effective, high-performance 8-bit microcontroller from the S08GT family, featuring an enhanced HCS08 core running up to 40 MHz, 8 KB of on-chip Flash, and a 32-pin QFN package with exposed thermal pad. It operates from a 1.8 V to 3.6 V supply and provides up to 34 general-purpose I/O pins with software-selectable pull-ups, making it suitable for general-purpose embedded control across industrial and consumer segments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, and peripherals such as timers, ADCs, and communication interfaces. The MC9S08GT8AMFCE belongs to the broader MCU hierarchy of microcontroller -> 8-bit MCU -> S08 family -> S08GT series -> power-efficient general-purpose class. The HCS08 core is an enhanced evolution of the legacy HC08 instruction set, adding the BGND instruction for background debugging while maintaining full source-level compatibility with HC08 code. This combination of instruction-set familiarity and modern features makes the S08GT family a popular choice for cost-sensitive upgrades of legacy HC08 designs. Key features include 8 KB Flash program memory, 1 KB RAM, an internal clock generator, multiple timer/PWM modules, an analog comparator, and a 10-channel 10-bit ADC. The device supports up to 32 interrupt/reset sources and offers a low-power wait and stop mode set for battery-friendly operation. The HCS08 core executes most instructions in one to two bus cycles, contributing to its energy-efficient throughput at 40 MHz. The device integrates the HCS08 CPU with a fast Flash controller, supporting in-application programming and security features to protect firmware IP. Its on-chip debug interface (background debug mode, BDM) allows non-intrusive in-circuit development without requiring a bond-out emulator, reducing tooling cost for engineers and shortening time-to-prototype. Typical applications include home appliances, motor control for small brushed DC and BLDC systems, security and alarm panels, industrial sensor interface boards, and consumer white goods such as washing machines and dishwashers. Its combination of low cost, robust I/O count, and integrated analog peripherals makes it well suited for mixed-signal front-end designs that need MCU control alongside signal conditioning. When designing with this device, allocate the QFN exposed pad to a continuous ground plane with multiple thermal vias to ensure proper heat dissipation and low-impedance ground reference. Verify that the chosen debugger supports the BDM protocol and plan the BGND/PTA4 pin routing early to avoid rework on a dense PCB. This page synthesizes distributor stock data, datasheet-verified specifications, and drop-in alternatives so engineers can make sourcing decisions without bouncing across DigiKey, Mouser, and the NXP product page. The NXP End-of-Life notice flagged on the official product page should be reviewed against your design's longevity requirements before committing to volume production.

Cotação Contato
MC9S08GT8AMFDE - 8-bit HCS08 MCU, 8KB Flash, 40MHz | NXP
MC9S08GT8AMFDE

MC9S08GT8AMFDE - 8-bit HCS08 MCU, 8KB Flash, 40MHz | NXP

The NXP MC9S08GT8AMFDE is an 8-bit S08GT family microcontroller built on the HCS08 CPU core, delivering up to 40 MHz clock speed with 8 KB of on-chip Flash program memory and a 48-pin QFN-EP (7x7 mm) package. It belongs to the cost-effective, high-performance S08 general-purpose microcontroller lineup and integrates an analog-to-digital converter alongside 34 software-configurable I/O ports. An 8-bit microcontroller (MCU) is a single-chip computer optimized for embedded control, integrating a CPU, non-volatile program memory, volatile data memory, peripheral interfaces (ADC, timers, communication), and I/O on one die. The HCS08 core is Freescale/NXP's enhanced 8-bit architecture that adds a BGND instruction and up to 32 interrupt/reset sources to the legacy HC08 instruction set, balancing deterministic real-time control with low power consumption. Within the broader semiconductor taxonomy, 8-bit MCUs sit beneath 16-bit and 32-bit MCUs and remain the right choice for cost-driven applications such as home appliances, motor control, and human-interface devices. Key features of the MC9S08GT8AMFDE include a 1.8 V to 3.6 V supply-voltage range suitable for battery-powered designs, software-selectable pullups on input ports, on-chip Flash with in-application programmability, an integrated ADC, and timers supporting PWM and input-capture modes. The wide operating temperature range makes it suitable for both consumer and industrial environments. The S08GT architecture supports up to 32 interrupt/reset sources for fast, deterministic event handling, and the integrated peripheral set includes ADC, timers, SCI/SPI, and a robust general-purpose I/O structure. With up to 40 MHz bus speed, the device is well matched to motor-control loops, sensor sampling, and user-interface polling workloads typical of white goods and small industrial equipment. Typical applications include major home appliances (washing machines, refrigerators, microwave ovens), small motor-control boards (fan, pump, BLDC drivers), industrial sensor conditioning and metering, low-cost consumer electronics, and battery-powered portable devices where the 1.8 V minimum supply enables single-cell Li-ion or two-AA operation. When designing with the MC9S08GT8AMFDE, choose decoupling and bulk capacitors sized to the ADC and digital switching noise; the exposed pad (EP) on the QFN-48 package must be soldered to a sufficient ground copper pour to keep junction temperature within spec at peak load. This page synthesizes NXP distributor pricing, same-family drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to support sourcing, replacement, and BOM decisions.

Cotação Contato
MC9S08GW32CLH - S08GW 8-bit MCU, 32KB Flash, 64-LQFP | NXP
MC9S08GW32CLH

MC9S08GW32CLH - S08GW 8-bit MCU, 32KB Flash, 64-LQFP | NXP

The NXP MC9S08GW32CLH is an 8-bit microcontroller from the S08GW family built on the proven S08 core, delivering 32 KB of on-chip Flash and 20 MHz CPU performance in a 64-pin LQFP (10x10 mm) package. It targets single-phase electric, gas and water flow metering applications with two independent 16-bit SAR analog-to-digital converters (ADCs), a programmable delay block, and a pulse counter with automatic sensor decoding. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory (Flash), peripheral I/O, and interrupt logic onto one silicon die. Within the broader taxonomy, the MC9S08GW32CLH belongs to the hierarchy: 8-bit MCU -> microcontroller -> microprocessor -> integrated circuit -> semiconductor. The S08 core uses an enhanced Harvard architecture and runs the same instruction set as the legacy HC08, giving designers a stable, well-documented software platform with modern peripherals. Key features include 32 KB (32K x 8) Flash program memory, two on-chip 16-bit SAR ADCs with hardware sequencer, an LCD driver controller suitable for multi-digit metrology displays, and a rich connectivity set including I2C, LINbus, SCI (UART) and SPI. The device includes PWM channels for switching transducers, an LCD controller, and a watchdog timer (WDT) for safety-critical metering functions. The MC9S08GW combines a low-power S08 core with metrology-grade analog front ends - the two 16-bit SAR ADCs are differential and can pair with shunt resistors or current transformers for active and reactive energy measurement. The built-in pulse counter with automatic decoder enables direct interface to gas and water meter pulse outputs, while the LCD driver removes the need for an external display controller in cost-sensitive meter designs. Typical applications include single-phase electric meters, gas flow meters, water flow meters, and other low-power instrumentation panels with LCD readouts. The 64-LQFP footprint also gives enough I/O for industrial sensor hubs and home energy displays. When designing with this part, ensure the ADC reference and shunt resistor layout follow metrology PCB guidelines to keep measurement error below the 0.5% accuracy class. Provide a low-impedance ground plane under the analog supply pins to prevent switching noise from coupling into the ADC input. This page synthesizes distributor pricing (DigiKey, Mouser, Octopart), NXP life-cycle data, drop-in pin-compatible alternatives within the S08GW family, and practical design notes beyond what the NXP product brief offers.

Cotação Contato
MC9S08GW64CLH - S08 8-bit MCU, 64KB Flash, 20MHz | NXP
MC9S08GW64CLH

MC9S08GW64CLH - S08 8-bit MCU, 64KB Flash, 20MHz | NXP

The NXP Semiconductors MC9S08GW64CLH is an 8-bit microcontroller based on the proven S08 core, delivering 64KB of Flash memory, 20MHz bus operation, and dual independent 16-bit SAR ADCs in a 64-pin LQFP (10x10 mm) package. It is purpose-built for utility metering: the integrated pulse counter with automatic sensor decoding targets gas and water flow meters, while the dual-ADC architecture with programmable delay block supports single-phase electric metering. An 8-bit microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals on one die. Within the power management and embedded control hierarchy, metering MCUs like the S08GW family sit between general-purpose 8-bit MCUs and dedicated metering ASSPs, offering meter-specific peripherals without sacrificing general I/O flexibility. Key features include the S08 core running at up to 20MHz, 64KB (64K x 8) Flash with in-application reprogramming, a flexible clock system with FLL (frequency-locked loop) supporting FEI, FEE, FBE, FBI, FBELP, and FBILP modes, and two independent 16-bit SAR ADCs. A programmable delay block ties ADC sampling to flow-pulse events, enabling accurate quasi-synchronous sampling of pressure and temperature for gas-density compensation. The device integrates typical metering peripherals: pulse counters with automatic quadrature/sensor decoding for reed, Hall, or optical flow sensors, plus serial communication (SCI/SPI/I2C-class peripherals on the S08 platform) for protocol handling in M-Bus, RF, and optical-head meter architectures. Low-power wait/stop modes support battery-powered water and gas meters with multi-year service life. Typical applications are gas flow meters, water flow meters, single-phase electric energy meters, and heat-cost allocators. The dual-ADC architecture allows simultaneous sensing of voltage and current channels in single-phase energy measurement. Design consideration: when the FLL reference source, reference divider, or trim value changes, or when moving between FLL-disabled and FLL-enabled modes, the clock specification applies per the manufacturer datasheet; allow settling time in software. If a crystal or resonator is used as the reference, ensure it is already running before mode transitions. This page synthesizes distributor pricing, drop-in alternatives, lifecycle (End-of-Life per NXP), and practical design notes not found in the manufacturer datasheet, verified as of 2026-10-10.

Cotação Contato